Search

Subhasmita Swain,1 Monalisa Pradhan,1,* Samapika Bhuyan,1,* RDK Misra,2 Tapash R Rautray1 1Biomaterials and Tissue Regeneration Laboratory, Centre of Excellence, Siksha ‘O’ Anusandhan (Deemed to Be University), Bhubaneswar, Odisha, 751030, India; 2Metallurgical, Materials and Biomedical Engineering Department, the University of Texas at El Paso, El Paso, TX, 79968, USA*These authors contributed equally to this workCorrespondence: Tapash R Rautray, Tel +91 9040000604, Email tapashrautray@soa.ac.inIntroduction: There is an ongoing need for improved healing response and expedited osseointegration on the Ti implants in acetabular fracture sites. To achieve adequate bonding and mechanical stability between the implant surface and the acetabular fracture, a new coating technology must be developed to promote bone integration and prevent bacterial growth.Methods: A cylindrical Ti substrate mounted on a rotating specimen holder was used to implant Ca2+, P2+, and Sr2+ ions at energies of 100 KeV, 75 KeV and 180 KeV, respectively, using a low-energy accelerator to synthesize strontium-substituted hydroxyapatite at varying conditions. Ag2+ ions of energy 100 KeV were subsequently implanted on the as-formed surface at the near-surface region to provide anti-bacterial properties to the as-formed specimen.Results: The properties of the as-formed ion-implanted specimen were compared with the SrHA-Ag synthesized specimens by cathodic deposition and low-temperature high-speed collision technique. The adhesion strength of the ion-implanted specimen was 43 ± 2.3 MPa, which is well above the ASTM standard for Ca-P coating on Ti. Live/dead cell analysis showed higher osteoblast activity on the ion-implanted specimen than the other two. Ag in the SrHA implanted Ti by ion implantation process showed superior antibacterial activity.Discussion: In the ion implantation technique, nano-topography patterned surfaces are not concealed after implantation, and their efficacy in interacting with the osteoblasts is retained. Although all three studies examined the antibacterial effects of Ag2+ ions and the ability to promote bone tissue formation by MC3T3-E1 cells on SrHA-Ag/Ti surfaces, ion implantation techniques demonstrated superior ability. The synthesized specimen can be used as an effective implant in acetabular fracture sites based on their mechanical and biological properties.Keywords: titanium, SrHA-Ag, ion implantation, osteogenic, anti-bacterial

The study described here combines materials science and engineering and mathematical analysis to fundamentally obtain insights underlying nanoscale deformation in polymer nanocomposites. The objective was achieved by examining the surface deformation response of two polymer nanocomposite systems with significant differences in ductility during scratching with a nanoindenter. The model host systems are a ductile polyethylene and a less ductile polypropylene. The model reinforcement material is nanoclay. The two systems are unique nanostructured materials because the distance between the individual clay layers is comparable to their thickness and also to the polymer segments. Thus, it is a morphology that is truly dominated by nanoscale features. Furthermore, we have used pressure-induced crystallization approach to alter the structure of the investigated two systems and study nanoscale surface deformation response. Our hypothesis is that the susceptibility to scratch deformation of nanostructured materials compared to their respective unreinforced counterpart depends on the shift of von Mises stress from the surface to the sub-surface region, leading to reduction in the maximum tensile stress induced by the scratch. To test the hypothesis, we have addressed two important aspects influencing the mechanics of surface deformation response of nanostructured materials. They include: (a) the determining role of nanoparticles on physical and mechanical properties and (b) the primary effect of nanoparticles on the structure of the host matrix. In the test of hypothesis, we have elucidated the relationship between structure, physical, and mechanical properties on the mechanism of nanoscale deformation via careful electron microscopy of the deformed surface. The nanoscale deformation response of polypropylene with large spherulites and α-phase was characterized by ripple-type deformation tracks that formed by a stick–slip mechanism. However, with decrease in spherulite size and evolution of toughness enhancing γ-phase, induced by high crystallization pressure and nanoclay, ironing represented the primary mode of deformation. In contrast, the highly ductile polyethylene system experienced multiple or single ironing process. In summary, the surface deformation topography implied that the nanoscale deformation response was material specific. Furthermore, electron microscopy topography of scratch tracks confirmed that reinforcement of polymers with nanoclay is a viable route to decrease the susceptibility of polymeric materials to nanoscale deformation and can be discussed in terms of physical and mechanical properties of materials, notably refinement of structure, percentage crystallinity, and elastic recovery. It was also intriguing to note that during nanoscratching, elastic recovery was high, in the range 77–85%, implying that a large fraction of the scratch-deformed volume was recovered. Finally, the electron microscopy findings and mechanical properties are related to mathematical analysis. [ABSTRACT FROM AUTHOR]

The cytological behaviour and functional dynamics (adhesion, spreading, synthesis of proteins) of fibroblasts when interacting with biomedical surfaces are intricately influenced by the inherent nature of surface (nanocrystalline or microcrystalline), where the nanocrystalline (NC) surface is preferred in relation to the microcrystalline (MC) surface. This preference is a direct consequence of the distinct differences in physical and chemical characteristics between NC and MC surfaces, which include crystal boundary bio-physical attributes, electron work function, surface energy, and charge carrier density. The observed variances in cytological behaviour at the interfaces of NC and MC bio-surfaces can be attributed to these fundamental differences, particularly accounting for the percentage and nature of crystal boundaries. Recognising and understanding these physical and chemical characteristics establish the groundwork for formulating precise guidelines crucial in the development of the forthcoming generation of biomedical devices.

The overview describes the synergy between biological sciences and cellular structures processed by additive manufacturing to elucidate the significance of cellular structured implants in eliminating stress shielding and in meeting the bio-mechanical property requirements of elastic modulus, impact resistance, and fatigue strength in conjunction with the biological functionality. The convergence of additive manufacturing, computer-aided design, and structure-property relationships is envisaged to provide the solution to the current day challenges in the biomedical arena. The traditional methods of fabrication of biomedical devices including casting and mechanical forming have limitations because of the mismatch in micro/microstructure, mechanical, and physical properties with the host site. Additive manufacturing of cellular structured alloys via electron beam melting and laser powder bed fusion has benefits of fabricating patient-specific design that is obtained from the computed tomography scan of the defect site. The discussion in the overview consists of two aspects - the first one describes the underlying reason that motivated 3D printing of implants from the perspective of minimising stress shielding together with the mechanical property requirements, where the mechanical properties of cellular structured implants depend on the cellular architecture and percentage cellular porosity. The second aspect focuses on the biological response of cellular structured devices.

Strengthening of biomedical Co-Cr-Mo alloys has been explored via thermomechanical processing for enhancing the durability of their biomedical applications. However, the effects of cold and hot deformation on the cellular activity continue to be unclear. In this study, we prepared Co-Cr-Mo alloy rods via cold swaging and hot-caliber rolling and studied the relationship between the microstructure and cellular response of pre-osteoblasts. The cold-swaged rod experienced strain-induced martensitic transformation, which increased the volume fraction of the hexagonal close-packed (hcp) ε-martensite to ∼60 vol.% with an increase in area reduction (r) to 30%. The 111 γ fiber texture of the face-centered cubic (fcc) γ-matrix followed the Shoji-Nishiyama orientation relationship with ε-martensite. Cell culture results revealed beneficial effects of cold swaging on the cell response, in terms of adhesion, proliferation and morphology of cells, although increasing r did not significantly affect cellular metabolism levels. The addition of small content of Zr (0.04 wt.%) led to enhanced focal adhesion of cells, which became more significant at higher r. The microstructural evolution during hot-caliber rolling, namely, grain refinement without any phase transformation and strong texture development, did not appreciably affect the cellular activity. These findings are envisaged to facilitate alloy design and microstructural optimization for favorable tuning the osseointegration of biomedical Co-Cr-Mo alloys., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Extracellular matrices (ECMs) provide important cues for cell proliferation and differentiation in the complex environment, which show a significant influence on cell functions. Herein, cell-derived ECMs were deposited on the polydopamine (PDA)-decorated porous Ti-24Nb-4Zr-8Sn (Ti2448) scaffolds fabricated by the electron beam melting method in order to improve biological functions. The influence of PDA-ECM coatings on cell functions was further investigated. The results demonstrated that the PDA-ECM coating facilitated adhesion, proliferation, and migration of MC3T3-E1 cells on Ti2448 scaffolds. Moreover, Ti2448-PDA-ECM scaffolds promoted osteogenesis differentiation of cells indicated by greater alkaline phosphatase activity and further mineralization, compared to the plain Ti2448 group. Meanwhile, Ti2448-PDA-ECM scaffolds enhanced bone growth after implantation for one month in rabbit femoral bone defects. Our findings suggest that the bioinspired PDA-ECM coating can be implemented on the porous Ti2448 scaffolds, which significantly improve the biological functions of orthopedic implants.

Periosteum is clinically required for the management of large bone defects. Attempts to exploit the periosteum's participation in bone healing, however, have rarely featured biological and mechanical complexity for the scaffolds relevant to translational medicine. In this regard, we report engineering of bioinspired periosteum with co-delivery of ionic and geometry cues. The scaffold demonstrated microsheet-like fibre morphology and was developed based on bioresorbable poly(-caprolactone) and bioactive copper-doped tricalcium phosphate (Cu-TCP). A coordinated interaction was found between the effects of Cu-TCP addition and uniaxial drawing, leading to tunable fibrogenesis for different fibre morphologies, organisation, and surface wettability. The coordination resulted in significant enhancements in Young's Modulus, yield stress and ultimate stress along fibrous alignment, without causing reductions across fibres. This demonstrated mechanical anisotropy of the scaffold similar to natural periosteum, and seeding with mouse calvarial preosteoblasts, the scaffold supported cell alignment with deposition of CaP-like nodules and extracellular matrix. This work provides new insights on periosteum engineering with osteo-related composite fibres. The artificial periosteum can be used in clinical settings to facilitate repair of large bone defects., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The wide application of magnesium alloys as biodegradable implant materials is limited because of their fast degradation rate. Hydroxyapatite (HA) coating can reduce the degradation rate of Mg alloys and improve the biological activity of Mg alloys, and has the ability of bone induction and bone conduction. The preparation of HA coating on the surface of degradable Mg alloys can improve the existing problems, to a certain extent. This paper reviewed different preparation methods of HA coatings on biodegradable Mg alloys, and their effects on magnesium alloys' degradation, biocompatibility, and osteogenic properties. However, no coating prepared can meet the above requirements. There was a lack of systematic research on the degradation of coating samples in vivo, and the osteogenic performance. Therefore, future research can focus on combining existing coating preparation technology and complementary advantages to develop new coating preparation techniques, to obtain more balanced coatings. Second, further study on the metabolic mechanism of HA-coated Mg alloys in vivo can help to predict its degradation behavior, and finally achieve controllable degradation, and further promote the study of the osteogenic effect of HA-coated Mg alloys in vivo.

The unique concept of phase reversion involving severe deformation of parent austenite into martensite, followed by annealing for a short duration, whereby the strain-induced martensite reverts to austenite, was adopted to obtain nano-grained/ultrafine-grained (NG/UFG) structure in a Cu-bearing biomedical austenitic stainless steel resulting in high strength-high ductility combination. Work hardening and accompanying deformation mechanism are two important aspects that govern the mechanical behavior of biomedical devices. Thus, post-mortem electron microscopy of the strained region was carried out to explore the differences in the deformation mechanisms induced by grain refinement, while the strain hardening behavior was analyzed by Crussard-Jaoul (C-J) analysis of the tensile stress-strain data. The strain hardening behavior consisted of four stages and was strongly affected by grain structure. Twinning-induced plasticity (TWIP) was the governing deformation mechanism in the NG/UFG structure and contributed to good ductility. In striking contrast, transformation-induced plasticity (TRIP) contributed to high ductility in the coarse-grained (CG) counterpart and was the governing strain hardening mechanism. When the grain size is less than ~1 μm, the increase in the strain energy and the austenite stability significantly reduce the possibility of strain-induced martensite transformation such that there is a distinct transition in deformation mechanism from nanoscale twinning in the NG/UFG structure to strain-induced martensite in CG structure. The differences in the deformation mechanisms are explained in terms of austenite stability - strain energy relationship., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Micro/nano-scale deformation behavior including hardness, elastic modulus, and pop-ins, was studied in a medical austenitic stainless steel followed by post-mortem EBSD characterization. Relatively higher hardness and modulus was observed near {101} and more pop-ins occurred in this orientation at high loading rate. The activation volume (v) obtained from nanoindentation had weak dependence on grain orientation and was ~10-20 b 3 , indicating that neither diffusional creep processes nor conventional dislocation segments passing through dislocation forests controls plastic deformation in our study. The plastic zone radius (c) and the distance of the indent from the grain boundary (d) were used to describe the effect of grain boundary on the pop-in effect. The ratio of c/d meets amplitude version of Gaussian peak function distribution for a given orientation, whose peak value remains nearly constant for all the orientations., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Cube texture and microstructural evolution of as-cast non-oriented silicon steel (1.3% Si) during cold rolling and annealing were studied. The results showed that the as-cast microstructure with grain size in the range of 100-500 μm had a weak texture. The strong orientation was mainly located at {100} and {110} planes. A significant content of shear-deformed grains oriented with {110}<110> were obtained by cold-rolling, and many regions oriented with Cube texture were distributed in the shear bands. During cold-rolling, the orientation of the shear-deformed microstructure tilted towards the {111}<112> orientation, while the matrix orientation retained {110}<110>. On further cold-rolling, the residual part of {110}<110> experienced shear deformation, forming more shear bands, strengthening the Cube orientation. During annealing, Cube orientation grains nucleated in the shear bands leading to strong Cube texture, and corresponding B 50 was 1.83T/1.79T.

Regeneration of long-bone segmental defects remains a challenge for orthopedic surgery. Current treatment options often require several revision procedures to maintain acceptable alignment and achieve osseous healing. A novel hollow tubular system utilizing magnesium-strontium (Mg-Sr) alloy with autogenous morselized bone filled inside to repair segmental defects was developed. To improve the corrosion and biocompatible properties, two coatings, Ca-P and Sr-P coatings, were prepared on surface of the implants. Feasibility of applying these coated implants was systematically evaluated in vitro and in vivo, and simultaneously to have a better understanding on the relationship of degradation and bone regeneration on the healing process. According to the in vitro corrosion study by electrochemical measurements, greater corrosion resistance was obtained for Ca-P coated sample, and attributed to the double-layer protective structure. The cytotoxicity and alkaline phosphatase (ALP) assays demonstrated enhanced bioactivity for Sr-P coated group because of the long-lasting release of beneficial Sr 2+ . At 12 weeks post-implantation with Mg-Sr alloy porous device, the segmental defects were effectively repaired with respect to both integrity and continuity. In addition, compared with the Ca-P coated implant, the Sr-P coated implant was more proficient at promoting bone formation and mineralization. In summary, the Sr-P coated implants have bioactive properties and exceptional durability, and promote bone healing that is close to the natural rate, implying their potential application for the regeneration of segmental defects., Competing Interests: All authors declared that no conflict of interest exits in the submission of this manuscript, and manuscript was approved by all authors for publication. I would like to declare on behalf of my co-authors that the work described was original research that has not been published previously, and not under consideration for publication elsewhere, in whole or in part. All the authors listed have approved the manuscript that is enclosed., (© 2020 [The Author/The Authors].)

Coherent transformation is considered to be an effective approach to refine the microstructure and enhance toughness of structural steels. However, there are gaps in the knowledge on the key aspects of microstructure that govern toughness. In this regard, a low alloyed experimental steel with lean chemistry was subjected to a simple heat treatment involving austenitization at different temperatures, followed by quenching and tempering to obtain bainitic microstructures with different boundary composition. The microstructure of the four experimental steels was characterized by electron backscattered diffraction and mechanical properties were determined. The study indicated that the density of high angle grain boundaries does not adequately reflect the change of ductile-to-brittle transition temperatures (DBTT) of the experimental steels. Thus, we propose here a new mechanism on reducing DBTT from the perspective of misorientation of boundary, which takes into consideration these aspects in defining DBTT. One is inhibition effect on cleavage fracture by boundaries with high {100}-plane misorientation angles, and the other is ductility improvement by boundaries with high {110}-plane misorientation angles. Furthermore, the contribution of prior austenite grain boundary, packet boundary, block boundary, and sub-block boundary on toughness is also analyzed.

In this study, we address the challenge of obtaining high strength at ambient and elevated temperatures in fire-resistant Ti-Mo-V steel with ferrite microstructures through thermo-mechanical controlled processing (TMCP). Thermally stable interphase precipitation of (Ti, Mo, V)C was an important criterion for retaining strength at elevated temperatures. Electron microscopy indicated that interphase precipitation occurred during continuous cooling after controlled rolling, where the volume fraction of interphase precipitation was controlled by the laminar cooling temperature. The interphase precipitation of MC carbides with an NaCl-type crystal structure indicated a Baker-Nutting (B-N) orientation relationship with ferrite. When the steel was isothermally held at 600 °C for up to 3 h, interphase precipitation occurred during TMCP with high thermal stability. At the same time, some random precipitation took place during isothermal holding. The interphase precipitation increased the elastic modulus of the experimental steels at an elevated temperature. It is proposed that fire-resistant steel with thermally stable interphase precipitation is preferred, which enhances precipitation strengthening and dislocation strengthening at elevated temperatures.

The implant surface and tissue experience strain when micro-motion occurs at the bone-implant interface under physiological loading. Moreover, strain is also introduced on the surface during mechanical processing of biomedical devices. Both these situations can induce phase transformation depending on the degree of stability of the microstructural constituents. In this regard, we elucidate here the interplay between mechanically-induced phase transformation (strain-induced martensite) in austenitic stainless steel on osteoblast functions. Strain-induced martensite significantly impacted cellular functions, notably, cell attachment, cell-surface interactions, proliferation, and synthesis of prominent proteins (fibronectin, actin, and vinculin). Strain-induced martensite favorably modulated cellular activity and contributed to small differences in hydrophilicity in relation to the non-strained austenitic stainless steel surface. The study provides a pathway for tuning biological functionality via microstructural control facilitated by mechanical strain., Competing Interests: Declaration of competing interest There are no conflicts of interest associated with this publication and there is no significant financial support for this work that could have influenced its outcome., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Cobalt-chromium-molybdenum alloys exhibit good mechanical properties (yield strength: ~530 MPa, ultimate tensile strength: ~1114 MPa, elongation-to-failure: ~47.3%, and modulus: ~227 GPa) and corrosion resistance. In recent years, from the perspective of osseointegration, they are considered to be lower in rank in comparison to the widely used titanium alloys. We elucidate here the significant and favorable modulation of cellular activity of Zr-modified Co-Cr-Mo alloys. The average grain size of Co-Cr-Mo alloy samples with and without Zr was 104 ± 27 and ~53 ± 11 μm, respectively. The determining role of small addition of Zr (0.04 wt. %) to the Co-Cr-Mo alloys in favorable modulation of cellular activity was accomplished by combining cellular biology and materials science and engineering. Experiments on the influence of Zr addition to Co-Cr-Mo alloys clearly demonstrated that the cell adhesion, spread and cell-substrate interactions were enhanced in the presence of Zr. The spread/growth rate of cells was ~120% on the Co-Cr-Mo alloy and 190% per day on the Co-Cr-Mo-Zr alloy. While the % area covered by the cells increased from ~5.1 to ~33.6% on Co-Cr-Mo alloy and ~19.2 to ~47.8% on Co-Cr-Mo-Zr alloy after 2 and 24 hr of incubation. Similarly, the cell density increased from ~1354 to ~3424 cells/cm 2 on Co-Cr-Mo alloy and ~3583 to ~7804 cells/cm 2 on Co-Cr-Mo-Zr alloy after 2 and 24 hr of incubation. Additionally, stronger vinculin focal adhesion contact and signals associated with actin stress fibers together with extracellular matrix protein, fibronectin, were noted., (© 2019 Wiley Periodicals, Inc.)

The ingenious concept of phase reversion annealing involving cold deformation of parent austenite to strain-induced martensite, followed by annealing was used to obtain nano-grained/ultrafine-grained (NG/UFG) structure in a Cu-bearing biomedical austenitic stainless steel resulting in high strength-high ductility combination. Having employed the concept effectively, the primary objective of this study is to critically analyze the interplay between the load-controlled deformation response, strain-rate sensitivity and deformation mechanism of NG/UFG austenitic stainless steel via nanoscale deformation experiments and compare with its coarse-grained (CG) counterpart. The study demonstrated that the strain-rate sensitivity of NG/UFG was ~1.5 times that of the CG structure. Post-mortem electron microscopy of plastic zone surrounding the indents indicated that the active deformation mechanism was nanoscale twinning with typical characteristics of a network of intersecting twins in the NG/UFG structure, while strain-induced martensite transformation was the effective deformation mechanism for the CG structure. The fracture morphology was also different for the two steels, essentially ductile in nature, and was characterized by striations marking the line-up of voids in NG/UFG steel and microvoid coalescence in CG counterpart. The differences in deformation mechanisms between the NG/UFG and CG structure are attributed to the austenite stability - strain energy relationship. Furthermore, the presence of ~3 wt % Cu in austenitic stainless steel had somewhat moderate effect on strain-rate sensitivity and activation volume at similar level of grain size in its Cu-free counterpart. Specifically, in the NG/UFG structure, the nanoscale twin density was noticeably higher in Cu-bearing austenitic stainless steel as compared to Cu-free counterpart, as Cu is known to increase the stacking fault energy., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Ti-6Al-4V alloys with cellular structure fabricated by additive manufacturing are currently of significant interest because their modulus is comparable to bone and the cellular structure allows the cells to penetrate and exchange nutrients, promoting osseointegration. We describe here a unique simulation device that replaces the traditional steady electrochemistry approach, enabling in-situ study of variation of ion concentration and surface potential with pore depth for cellular structured Ti-6Al-4V alloys fabricated by electron beam melting (EBM) in phosphate buffered saline (PBS). This approach addresses the scientific gap on the electrochemical behavior of cellular structured titanium alloys. The study indicated that concentration of H + and Cl - increased with the increase of pore depth, while the surface potential decreased. The exposed surface of inner cellular structure was not corroded but passivated after immersing in PBS at 37 °C for 14 days, which was independent of pore depth. Furthermore, X-ray photoelectron spectroscopy (XPS) and Mott-Schottky (M-S) studies suggested that a thinner passive film containing a greater donor density was formed on the surface of cellular structured Ti-6Al-4V alloy at the deepest pore depth. This is attributed to insufficient oxygen supply and Cl - adsorption on the surface inside the pores. STATEMENT OF SIGNIFICANCE: Porous titanium alloys are promising implants in biomedical applications. However, it is a challenge to accurately characterize the corrosion behavior of porous titanium alloys with complex pore structure using traditional electrochemical methods. In this study, we have adopted a special device to simulate the environment within the pore structure. The variation in ion concentration and surface potential of Ti-6Al-4V fabricated by EBM with pore depth was in-situ monitored. After immersing in PBS for 14 days, Ti-6Al-4V exhibited good corrosion properties and the samples with less than 60 mm pore depth were not corroded but passivated. Also, we analyzed the difference in corrosion property at different pore depth. This type of in-situ corrosion performance monitoring in EBM-produced Ti-6Al-4V has not been previously studied., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier Ltd.)

In recent years, mesh structures have attracted significant interest for structural and functional applications. However, the mechanical strength and energy absorption ability of uniform mesh structured materials degrade with density. To address this challenge, we propose the concept of functionally graded mesh structures. The objective of the proposed research is to fundamentally understand the compressive behavior of graded mesh structures. The compression-compression fatigue behavior of functionally graded Ti-6Al-4V mesh structure under identical bulk stress condition is studied here. During cyclic deformation, it was observed that the local stress distribution in the struts was not uniform because of inhomogeneous mechanical properties of the constituents. Fatigue cracks first initiated in the lowest strength constituent, and then propagated until structural failure occurred. However, no obvious damage was observed in other constituents during the entire process. In contrast with iso-strain state, the fatigue life of graded structure is mainly determined by the constituent with the lowest strength., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Isothermal treatment affects the microstructural evolution and the precipitation behavior of high-strength low alloy (HSLA) steels. In this regard, thermal simulation of different isothermal treatment temperatures was adopted by using a thermomechanical simulator. The results showed that hardness reached the maximum value at 600 °C holding temperature, which was related to a finer grain structure and granular bainite. The strengthening effect of precipitates was remarkable due to the combination of small particle size and small interparticle spacing. It is presumed that the precipitation started after 600 s at 600 °C. Precipitation strengthening continued to exist, even though coarsening of ferrite grains led to softening phenomena when the specimen was isothermally held at 750 °C, which led to relatively high hardness. The precipitates were fcc (Ti, Nb) (N, C) particles, and belonged to MX-type precipitates. Average size of precipitates increased from 3.14 to 4.83 nm when the specimens were isothermally held between 600 °C and 800 °C. Interparticle spacing of precipitates also increased with increasing isothermal treatment temperatures. These led to a reduction in precipitation strengthening. At the same time the polygonal ferrite content increased and ferrite grain size got larger, such that the hardness decreased continuously., Competing Interests: The authors declare no conflict of interest.

Conventional coarse-grained (CG) biomedical austenitic stainless steel with grain size in the micrometer range was subjected to a novel phase reversion concept involving severe cold deformation, followed by annealing, when the cold deformed martensite reverts to austenite with grain size in the nanometer/ultrafine (NG/UFG) regime (~200-400 nm). The mechanical behavior of CG and NG/UFG steels was studied via load-controlled and displacement-controlled experiments using a nanoindentation technique with the aim to simulate micromotion. The plastic zone associated with the indentation-induced deformed region was characterized by post-mortem electron microscopy of the deformed region to elucidate the deformation mechanism. Nanoscale twinning was the deformation mechanism in steel with grain size in the NG/UFG regime, and contributed to the ductility of high strength steel. In contrast, strain-induced martensite contributed to the ductility of low strength CG steel with micrometer grain size. Interestingly, besides the differences in the mechanical behavior, the biological functions of the two steels were remarkably different. Higher cell attachment, proliferation and higher expression level of prominent proteins, fibronection, actin and vinculin were favored by a surface with grain size in the nanometer regime and was in striking contrast with the surface with micrometer grain size. This behavior is attributed to the differences in the fraction of grain boundaries that are high energy two-dimensional defects. The study advances our understanding of the mechanical behavior of biomaterials and their cellular functions., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Here, we elucidate the significant impact of carbon nanotubes (CNTs) on the electrochemical behavior of Mg-based amorphous composite materials that were reinforced with CNTs while using pressure die casting. The addition of 3 vol % CNTs led to an increase in the compressive strength of Mg-based amorphous material from 812 MPa to 1007 MPa, and the fracture strain from 1.91% to 2.67% in the composite. Interestingly, the addition of CNTs significantly contributed to the enhancement of corrosion resistance of Mg-based glass by ~30%. The superior mechanical properties are primarily related to the fact that the addition of CNTs hindered the growth of shear bands (cracks), while the high corrosion resistance is related to inferior wettability and the bridging effect between adherent corrosive oxide film and the matrix that provided enhanced corrosion resistance., Competing Interests: The authors declare no conflict of interest.

In this study, a 304/20MnSi stainless-steel clad rebar was prepared by single-pass compression process using the MMS-200 Thermal Mechanical Simulator. The impact of different degrees of deformation and deformation temperature on microstructure evolution and the mechanical properties of stainless steel clad rebars were investigated. The study indicated that with the increase of the degree of deformation, the content of pearlite in a carbon steel matrix was increased, and the grains refined. The metallurgical bonding of the bonded interface was formed under high temperature and high extrusion force. With the increase of the deformation temperature, more bainite was obtained on the side of carbon steel, and the grain size increased. The obvious diffusion of Fe, Cr and Ni elements near the bonding interface resulted in higher microhardness of the stainless steel side and smaller microhardness of the carbon steel side. Moreover, the engineering stress-strain curves obtained by the tensile test showed that the plastic deformation of stainless steel and carbon steel was more coordinated. With the increase of deformation temperature and the degree of deformation, the tensile strength of the stainless steel clad rebar was as high as 690 MPa and the elongation was 26%, which was superior to the properties of the clad rebar prepared by other process parameters.

Segmental defects are formidable challenges for orthopedic surgeons that are caused by large osseous defects such as open injury, comminuted fracture as well as other severe traumas and infection. Current treatment options have practical and clinical shortcomings, calling for innovative bone graft materials. This study is related to hollow tubular magnesium‑strontium (MgSr) alloy scaffolds with autologous morselized bone filled inside and three different coatings were individually applied on MgSr scaffolds, respectively, to study the effects of degradation and bioactivity of the grafts on new bone growth. The optimal coating method was screened using immersion tests, cell proliferation and adhesion, alkaline phosphatase (ALP) assay in vitro, and 4 weeks' implantation in a critical-size segmental defect in vivo. More new bone formation was observed by radiographic tests and histology along the ulna defects, when magnesium scaffold grafts were implanted. Meanwhile, depression occurred for blank control group with only autologous morselized bone filled, because of rapid absorption rate of morselized bone during initial implantation. Therefore, biodegradable MgSr alloy grafts showed their potential application in treating the critical-size segmental defects. As for different coating methods, CaP chemically deposited (CaP) coated sample showed least H 2 evolution in vivo, demonstrating highest corrosion resistance and relative stable interfaces, however, the least beneficial ion release meanwhile. Micro-arc oxidation coating (MAO) degraded faster comparing with CaP, while with the main composition of MgO. They both indicate insufficient bioactivity in bone formation. The results suggest superior combination of bioactive surface, beneficial ions release and appropriate corrosion rate of Strontium phosphate conversion (SrP) coating, indicating superior comprehensive oeteoconductive and osteoinductive properties of coatings on hollow tubular MgSr alloy scaffold., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Herein, the influence of inter-pass cooling (IC) and conventional two-stage rolling (CTR), on microstructural evolution and plastic deformation behavior of ultra-heavy EH47 plates, is demonstrated. It is reported that the deformation amount and deformation rate, in every deformation pass during rough rolling, at 1/4- and 1/2-thickness of IC steel were higher than the CTR steel. The volume fraction of ferrite and acicular ferrite was 45% and 18%, at 1/4-thickness, and 35% and 50% at 1/2-thickness of IC steel, respectively, whereas the sum of both ferrite phases was smaller than 25% in the CTR steel. The austenite grain boundary area and high-angle grain boundary fraction in the IC steel were higher than the CTR steel. The high density of fine and shapeless pearlite has been observed in IC steel, whereas large-size carbides, with hexagonal structure, have been observed in CTR steel. Compared to the CTR steel, the density of precipitates was apparently lower in IC steel. Two kinds of Nb containing precipitates, such as (Ti, Nb)(C, N) and (Nb, Ti)C, were observed in the tested steels. Total ductility and uniform elongation of the IC steel were higher than the CTR steel. During the tensile process, the crack initiation energy and crack propagation energy of the IC steel were higher than the CTR steel. Moreover, the volume fraction of retained austenite (FCC) was reduced from 7.71% to 0.42% near the tensile fracture in IC steel at 1/4-thickness. In additon, the strain of synergetic plastic deformation of the IC steel was higher than the CTR steel. Meanwhile, compared to the CTR steel, the synergetic plastic deformation of the IC steel occurred at low stress after the yield point, which can be ascribed to the presence of fewer microcracks in the IC steel. Hence, a delayed fracture has been observed in the IC steel plate., Competing Interests: The authors declare no conflict of interest.

The objective of this study is to elucidate the elution response of bone morphogenetic protein (BMP-2) in tuning cellular functions on 3D-printed titanium alloy mesh scaffolds subjected to microarc/plasma electrolytic oxidation process. The microtopographical cues enabled strong interaction with BMP-2 protein, which led to controlled release. Furthermore, the interaction of BMP-2 with the surface microtopographical cue regulated osteoblast cellular activity by contributing to the early phase differentiation and mineralization of osteoblasts. The in vitro BMP-2 release kinetics showed an initial burst of BMP-2 after day 1, followed by a controlled release on plasma electrolytic oxidized mesh structure. The profile represented that the rate of release decreased with increase in time on both as-fabricated and plasma electrolytic oxidized mesh structures after 24 h, with relatively higher degree on plasma electrolytic oxidized mesh structure. Furthermore, the in vitro osteoblast cellular activity indicated enhanced osteogenic induction on BMP-2 adsorbed plasma electrolytic oxidized mesh structure. Cells penetrated into micropores through several filopodia-like cellular extensions by increasing the area of contact, leading to stronger cell adhesion on BMP-2 adsorbed plasma electrolytic oxidized mesh structure. The up-regulation of biochemical markers and quantification of the expression level of cell secreted proteins underscored the determining role of BMP-2 eluting 3D mesh structure in modulating osteoblasts functions. The study emphasizes the potential of BMP-2 in rendering plasma electrolytic oxidized 3D-printed titanium alloy mesh structure osteoinductive and controlled delivery of BMP-2. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 49-60, 2019., (© 2018 Wiley Periodicals, Inc.)

Considering that micromotions generated at the bone-implant interface under physiological loading introduce mechanical strain on the tissue and surface of the implant and that strain can be introduced during processing of the biomedical device, we elucidate here the interplay between mechanically-induced nanoscale twinning in austenitic stainless steel on osteoblast functions. Mechanically-induced nanoscale twinning significantly impacted cell attachment, cell-substrate interactions, proliferation, and subsequent synthesis of prominent proteins (fibronectin, actin, and vinculin). Twinning was beneficial in favorably modulating cellular activity and contributed to small differences in hydrophilicity and nanoscale roughness in relation to the untwinned surface., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

To elucidate the hot deformation characteristics of TiAl alloys, flow stress prediction, microstructural evolution and deformation mechanisms were investigated in Ti-44Al-5Nb-1Mo-2V-0.2B alloy by isothermal compression tests. A constitutive relationship using the Arrhenius model involving strain compensation and back propagation artificial neural network (BP-ANN) model were developed. A comparison of two models suggested that the BP-ANN model had excellent capabilities and was more accurate in predicting flow stress. Based on the microstructural analysis, bending and elongation of colonies, γ and B2 grains were the main microstructural constituents at low temperature and high strain rate. Dynamic recrystallization (DRX) of γ and dynamic recovery (DRY) of β/B2 were the main deformation mechanisms. With the increase of temperature and decrease of strain rate, phase transformation played an important role. The flake-like γ precipitates in B2 grains, and a coarsening of γ lamellae via α lath dissolution during compression were observed. Additionally, the flow softening process commenced with dislocation pile-up and formation of sub-grain boundaries, followed by grain refinement, twins and nano-lamellar nucleation. Continuous DRX and phase transformation promoted the formability of Ti-44Al-5Nb-1Mo-2V-0.2B alloy., Competing Interests: The authors declare no conflict of interest.

We elucidate here the determining role of Nb interlayer on mechanical properties of Ti/steel clad plate fabricated by vacuum rolling cladding (VRC) as a function of different heating temperatures. A critical analysis on the clad interface via electron probe micro-analyzer, X-ray diffractometer and shear testing were conducted to investigate the influence of TiC, Fe-Nb and TiFe compounds and Nb-Ti solid solution on microstructural evolution and shear properties of Ti/steel clad plate. The inter-diffusion between Ti, C and Fe was effectively restrained by adding the Nb interlayer at heating temperature of 800 °C, and average shear strength of 279 MPa was achieved. With increase of heating temperature, Nb-Ti solid solution was formed at the Ti/Nb interface, which reduced mechanical properties of clad plate at 900 °C. At 1000 °C, TiC and Nb-Fe compounds and Nb-Ti solid solution were formed at the interface, and minimum average shear strength of 152 MPa was achieved. The detailed analysis on the clad interface suggested that ideal shear strength can be obtained through the addition of Nb interlayer and selecting appropriate heating temperature.