Search

Intense highly charged ion beam production is essential for high-power heavy ion accelerators. A novel movable Vlasov launcher for superconducting high charge state Electron Cyclotron Resonance (ECR) ion source has been devised that can affect the microwave power effectiveness by a factor of about 4 in terms of highly charged ion beam production. This approach based on a dedicated microwave launching system instead of the traditional coupling scheme has led to new insight on microwave-plasma interaction. With this new understanding, the world record highly charged xenon ion beam currents have been enhanced by up to a factor of 2, which could directly and significantly enhance the performance of heavy ion accelerators and provide many new research opportunities in nuclear physics, atomic physics and other disciplines.

Processes of the secondary electron emission (SEE) from the walls are included into the Numerical Advanced Model of Electron Cyclotron Resonance Ion Sources (NAM-ECRIS). It is found that SEE strongly influences electron confinement time and ion production. With the modified model, we observe reactions of the source to changes in a gas flow into the source and in an injected microwave power. The source performance with scaling the hexapole magnetic field is investigated. The calculated tendencies are close to the experimental observations.

The three-dimensional particle-in-cell model NAM-ECRIS is used for investigation of how the DECRIS-PM Electron Cyclotron Resonance Ion Source is reacting to changes in the source magnetic configuration. The accent is made on changes in the magnetic field at the magnetic trap center, the minimum-B value. It is calculated that the optimal normalized value of the field is ~0.8, close to the experimental observations. The reasons for existence of the optimum are discussed. It is observed that the electron energies are increasing with the increased minimum-B values due to enhanced confinement of the energetic electrons in the plasma. Bumps in energy spectra of the radially lost electrons are observed and explained to be due to nonadiabatic losses of electrons.

The three-dimensional NAM-ECRIS model is applied for studying the metal ion production in the DECRIS-PM Electron Cyclotron Resonance Ion Source. Experimentally measured extracted ion currents are accurately reproduced with the model. Parameters of the injection of metal vapors into the source are optimized. It is found that the axial injection of the highly directional fluxes allows increasing the extracted ion currents of the highly charged calcium ions by factor of 1.5. The reason for the gain in the currents is formation of internal barrier for the ions inside the plasma, which increase the ion extraction and production efficiency. Benefits of injecting the singly-charged calcium ions instead of atoms are discussed.

Three-dimensional numerical model is developed and applied for studies of physical processes in Electron Cyclotron Resonance Ion Source. The model includes separate modules that simulate the electron and ion dynamics in the source plasma in an iterative way. The electron heating by microwaves is simulated by using results of modelling the microwave propagation in the plasma by the COMSOL Multiphysics software. Extracted ion currents and other parameters of the source are obtained for different gas flows into the source. It is observed that the currents are strongly influenced by ion transport in transversal direction induced by the plasma potential gradients. Impact of some special techniques on the source performance is investigated. Magnetic field scaling is shown to reduce the ion losses during their movement toward the extraction aperture, as well as use of the aluminum chamber walls and mixing of the working gas with helium.

We show theoretically that anisotropy of electronic distribution function inside the laser-irradiated metal leads to the formation of edge currents at the timescale of distribution isotropization. When the electronic pressure in the skin-layer is anisotropic, pressure gradient appears to be non-potential force effectively producing low-frequency magnetic field. In typical experiments with femtosecond laser pumping generated internal magnetic field can rich magnitude up to ~1 Tesla in non-damaging interaction regime. We demonstrate that this field is localized inside the metal, while just a minor part of its energy can be radiated into free space as a sub-terahertz signal., Comment: 9 pages, 5 figures

The measurement of the axially lost electron energy distribution escaping from a minimum-B electron cyclotron resonance ion source in the range of 4-800 keV is reported. The experiments have revealed the existence of a hump at 150-300 keV energy, containing up to 15% of the lost electrons and carrying up to 30% of the measured energy losses. The mean energy of the hump is independent of the microwave power, frequency and neutral gas pressure but increases with the magnetic field strength, most importantly with the value of the minimum-B field. Experiments in pulsed operation mode have indicated the presence of the hump only when microwave power is applied, confirming that the origin of the hump is rf-induced momentum space diffusion. Possible mechanism of the hump formation is considered basing on the quasi-linear model of plasma-wave interaction., Comment: 13 pages, 18 figures, submitted to "Plasma Physics and Controlled Fusion"

The Numerical Advanced Model of Electron Cyclotron Resonance Ion Source (NAM-ECRIS) is applied for studies of the physical processes in the source. Solutions of separately operating electron and ion modules of NAM-ECRIS are matched in iterative way such as to obtain the spatial distributions of the plasma density and of the plasma potential. Results reveal the complicated profiles with the maximized plasma density close to the ECR surface and on the source axis. The ion-trapping potential dips are calculated to be on the level of ~(0.01-0.05) V being located at the plasma density maxima. The highly charged ions are also localized close to the ECR surface. The biased electrode effect is due to an electron string along the source axis formed by reflection of electrons from the biased electrode and the extraction aperture. The string makes profiles of the highly charged ions more peaked on the source axis, thus increasing the extracted ion currents.

We investigate the process of entangled state of light generation while propagation along a one dimensional array of single-mode nonlinear waveguides. We consider a situation when entanglement is formed due to spontaneous parametric down-conversion of the pump which is present only in a signal waveguide. In the considered process the generated state of light is multi-mode squeezed. We demonstrate that starting from certain distance of light propagation only pairs of waveguides, located symmetrically with respect to the pumped one, occur to be entangled. Also there is an optimal pump amplitude for which the formed quantum correlations are most pronounced. Entanglement for multi-mode squeezed states may be very sensitive for phase fluctuations in the pump. We investigate the influence of such noise on the discussed process. We demonstrate that for situation of generation of few photon entangled states the influence of phase fluctuations is negligible. But it dramatically increase with the growth of average photon numbers in the formed quantum states.

The dodecaboride LuB$_{12}$ with cage-glass state and rattling modes has been studied to clarify the nature of the large amplitude vibrations of Lu ions. Discovered anisotropy of charge transport in conjunction with distortions of the conventional \textit{fcc} symmetry of the crystal lattice may be attributed to coherent motion of Lu ions along singular direction in the lattice. Arguments are presented in favor of cooperative dynamic Jahn-Teller effect in the boron sublattice to be the reason of the rattling mode, lattice distortion and formation of the filamentary structure of the conductive channels., Comment: 5 pages, 4 figures, 1SI

Charge-breeding processes in Electron Cyclotron Resonance Ion Sources are numerically simulated by using the target helium plasma parameters obtained with NAM-ECRIS code. Breeding efficiency is obtained as a function of 1+ ion injection energy for some alkali ion beams. Time dependencies of extracted ions are calculated; typical times for reaching saturation in currents are in the range of few tens of milliseconds. Role of charge-exchange processes in breeding of ions is discussed. Recycling of ions on the source walls is shown to be important.