Search

The shortage of specific glycan recognition reagents has proven a significant hurdle in the development of assays to detect altered glycoforms associated with cancer. Here, a carbohydrate-binding aptamer originally selected against the glycan moiety of prostate-specific antigen (PSA) is used as a lectin-mimicking reagent. As a first proof-of-principle, this aptamer has been applied to develop a sandwich-type electrochemical biosensor for the detection of the serum amyloid P (SAP) component, a glycosylated protein whose increased sialylation has been associated with pancreatic cancer. The assay combines a specific antibody for this potential tumor biomarker and the aptamer as capture and detection receptors, respectively. Two oriented antibody immobilization approaches, protein A-based and boronic ester-based attachment to self-assembled monolayers built onto gold surfaces, were comparatively evaluated, the latter being able to circumvent the unwanted interaction between the aptamer and the glycans on the electrode-attached antibody. The resulting biosensing platform allows the detection of the SAP glycoprotein at levels of nanograms per milliliter with a reproducibility value lower than 20%, both in aqueous buffer and in serum. This work represents a proof-of-concept of a promiscuous ligand of proteins with high levels of sialylated glycans typically produced by cancer cells.

A major societal challenge is the development of the necessary tools for early diagnosis of diseases such as cancer and sepsis. Consequently, there is a concerted push to develop low-cost and non-invasive methods of analysis with high sensitivity and selectivity. A notable trend is the development of highly sensitive methods that are not only amenable for point-of-care (POC) testing, but also for wearable devices allowing continuous monitoring of biomarkers. In this context, a non-invasive test for the detection of a promising biomarker, the protein Interleukin-6 (IL-6), could represent a significant advance in the clinical management of cancer, in monitoring the chemotherapy response, or for prompt diagnosis of sepsis. This work reports a capacitive electrochemical impedance spectroscopy sensing platform tailored towards POC detection and treatment monitoring in human serum. The specific recognition of IL-6 was achieved employing gold surfaces modified with an anti-IL6 nanobody (anti-IL-6 VHH) or a specific IL-6 aptamer. In the first system, the anti-IL-6 VHH was covalently attached to the gold surface using a binary self-assembled-monolayer (SAM) of 6-mercapto-1-hexanol (MCH) and 11-mercaptoundecanoic acid. In the second system, the aptamer was chemisorbed onto the surface in a mixed SAM layer with MCH. The analytical performance for each label-free sensor was evaluated in buffer and 10% human serum samples and then compared. The results of this work were generated using a low-cost, thin film eight-channel gold sensor array produced on a flexible substrate providing useful information on the future design of POC and wearable impedance biomarker detection platforms., (© 2023. The Author(s).)

Characterization of extracellular matrix (ECM) is becoming more and more important to decipher cancer progression. Constant remodeling results in ECM components degradation or unusual ECM accumulation that releases short fragments to the body fluids. These fragments might be potential cancer biomarkers but to detect them specific receptors are needed. In response to this demand, we present the first electrochemical aptamer-based competitive assay for the minor collagen XI, dysregulated in several carcinomas. It was performed on magnetic beads using enzymatic labeling. First, we selected the most appropriate tag for the aptamer (biotin or 6-carboxyfluorescein). The former yielded higher currents by chronoamperometry and it was used for the competitive assay. The collagen fragment, a 16mer peptide used as the target, was detected from 52 to 1000 nM with an RSD of about 5%. The LOD of the assay was estimated as 24 nM (44 ng/mL). The performance of the assay in serum diluted 1:2 was equivalent to the assay in PBS. The detection of α1 chain of human collagen XI was also possible in cell lysates and confirmed by aptacytofluorescence, which is promising as a new tool to validate this fragment as a cancer biomarker., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

The extracellular matrix (ECM) plays an essential role in tumor progression and invasion through its continuous remodeling. The growth of most carcinomas is associated with an excessive collagen deposition that provides the proper environment for tumor development and chemoresistance. The α1 chain of a minor human collagen, type XI, is overexpressed in some tumor stroma, but not found in normal stroma. To test the clinical utility of this collagen as a cancer biomarker, specific receptors are needed. Available antibodies do not show enough selectivity or are directed toward the propeptide region that is cleaved when the protein is released to the ECM. Here we show the selection of an aptamer for the specific C-telopeptide region using a 16-mer peptide as the target for the SELEX. The aptamer selected with a K d of ∼25 nM was able to capture the collagen XI from cell lysates. It was also used for target detection in a mixed antibody-aptamer sandwich assay showing it can be useful for diagnostic purposes in biological fluids., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 The Authors. Published by Elsevier B.V. All rights reserved.)

The role of the extracellular matrix (ECM) remodeling in tumorigenesis and metastasis is becoming increasingly clear. Cancer development requires that tumor cells recruit a tumor microenvironment permissive for further tumor growth. This is a dynamic process that takes place by a cross-talk between tumor cells and ECM. As a consequence, molecules derived from the ECM changes associated to cancer are released into the bloodstream, representing potential biomarkers of tumor development. This article highlights the importance of developing and improving bioanalytical methods for the detection of ECM remodeling-derived components, as a step forward to translate the basic knowledge about cancer progression into the clinical practice., (© 2021. Springer-Verlag GmbH Germany, part of Springer Nature.)

The prostate specific antigen (PSA) test is the gold standard for the screening of prostate cancer (PCa), despite its limited clinical specificity. Long noncoding RNAs are released from the tumor tissue to the urine and show great potential for improving specificity in PCa diagnosis. This work reports on a sandwich-type hybridization assay to detect both the urinary biomarker prostate cancer antigen 3 (PCA3) and an endogenous control, the PSA mRNA. Multiple fluorescein-tagged hybridization assistant probes are used to promote the selective capture of this long noncoding RNA, and sensitivity by incorporating multiple redox enzymes per target molecule, after addition of antifluorescein Fab fragment-peroxidase conjugate. This strategy alleviates the problems associated with the low natural abundance of this marker, its large size, and complex secondary structure. The individual genosensors exhibit good sensitivity (2.48 ± 0.01 μA nM -1 and 6.4 ± 0.3 μA nM -1 for PCA3 and PSA, respectively), with wide linear ranges (from 25 pM to 10 nM for PCA3 and 1 nM for PSA), and detection limits in the low picomolar range (4.4 pM and 1.5 pM for PCA3 and PSA, respectively). This analytical performance is retained in the dual configuration without significant cross-talk, despite using the same enzyme label. The usefulness of this dual platform was demonstrated by analyzing RNA extracts from the prostate cancer cell line LNCaP and from urine samples of prostate cancer patients., (Copyright © 2021 The Author(s). Published by Elsevier B.V. All rights reserved.)

Prostate specific antigen (PSA) is the common biomarker for prostate cancer (PCa). However, its lack of specificity to differentiate PCa from benign prostate disorders stimulates the search for alternative cancer biomarkers to improve the clinical management of the patients. Different studies have described changes in the core-fucosylation level of PSA between PCa patients and healthy controls. To exploit these findings, we have adapted an impedimetric aptamer-based sensor to the dual recognition of PSA. Two different aptamers, PSAG-1 and anti-PSA, are immobilized onto two adjacent nanostructured gold electrodes. The direct binding from diluted serum samples of specific glycosylated-PSA to the first sensor and total PSA to the second one leads to changes in the charge transfer resistance, which correlate to the amount of glycosylated and total PSA in the sample. The sensors are able to measure PSA in serum with a dynamic range between 0.26 and 62.5 ng/mL (PSAG-1) and from 0.64 to 62.5 ng/mL (anti-PSA), with a reproducibility of 5.4 %. The final output of the proposed platform is the ratio between PSAG-1 reactive PSA and total PSA, defined as the glycan score. The glycan score was tested in serum samples from patients with different pathologies, showing excellent correlation between the measured score and the known diagnosis of the patients. Hence this dual aptamer-based impedimetric biosensor could be used as a minimally invasive method for the diagnosis of prostate cancer., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Enzyme-linked immunosorbent assays are currently the most popular methods to quantify gluten in foods. Unfortunately, the antibodies used as specific receptors in such methods are not compatible with the usual solvents for the extraction of gluten proteins. In consequence, commercial tests require a high dilution of the sample after the extraction, increasing the limit of quantification and decreasing convenience. In this work, we have rationally truncated an aptamer capable of recognizing gliadin in a deep eutectic solvent (DES). The truncated aptamer is a 19-nucleotides-long DNA that minimizes self-hybridization, allowing the development of an electrochemical sandwich-based sensor for the quantification of gluten in the DES ethaline. The sensor incorporates two identical biotin-labeled truncated aptamers, one of which is immobilized on a carbon screen-printed electrode and the other reports the binding of gliadin after incubation in streptavidin-peroxidase. This sensor can detect gliadin in DES, with a dynamic range between 1 and 100 μg/L and an intra-assay coefficient of variation of 11%. This analytical performance allows the quantification of 20 μg of gluten/kg of food when 1 g of food is extracted with 10 mL of ethaline. We demonstrate the ability of this method to achieve the measurement of gluten in food samples, after the extraction with pure ethaline. The assay is useful for the analysis of residual gluten levels in foods, thus facilitating the evaluation of any potential health risk associated with the consumption of such food by people with celiac disease or other gluten-related disorders., (Copyright © 2020 Elsevier B.V. All rights reserved.)

A personal glucose meter (PGM)-based method for quantitative detection of a urinary nucleic acid biomarker in prostate cancer screening, the so-called PCA3, is reported herein. A sandwich-type genoassay is conducted on magnetic beads to collect the target from the sample by specific hybridization, making the assay appropriate for PCA3 detection in biological fluids. The success of the method hinges on the use of alkaline phosphatase (ALP) to link the amount of nucleic acid biomarker to the generation of glucose. In particular, specifically attached ALP molecules hydrolyze D-glucose-1-phosphate into D-glucose, thus enabling the amplification of the recorded signal on the personal glucose meter. The developed genoassay exhibits good sensitivity (3.3 ± 0.2 mg glucose dL -1 pM -1 ) for PCA3, with a dynamic range of 5 to 100 pM and a quantification limit of 5 pM. Likewise, it facilitates point-of-care testing of nucleic acid biomarkers by using off-the-shelf PGM instead of complex instrumentation involved in traditional laboratory-based tests.

The tunability of SELEX procedure is an essential feature to supply bioaffinity receptors (aptamers) almost on demand for analytical and therapeutic purposes. This longstanding ambition is, however, not straightforward. Non-invasive cancer diagnosis, so called liquid biopsy, requires collection of body fluids with minimal or no sample pretreatment. In those raw matrices, aptamers must recognize minute amounts of biomarkers that are not unique entities but large sets of variants evolving with the disease stage. The susceptibility of aptasensors to assay conditions has driven the selection of aptamers to natural environments to ensure their optimum performance in clinical samples. We present herein a compilation of the SELEX procedures in natural milieus. By revising the electrochemical aptasensors applied to clinical samples for cancer diagnosis and tracing back to the original SELEX we analyze whether aptamers raised using these SELEX strategies are being incorporated to the diagnostic devices and how aptasensors are finding their way to a market dominated by antibody-based assays., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Detecting specific protein glycoforms is attracting particular attention due to its potential to improve the performance of current cancer biomarkers. Although natural receptors such as lectins and antibodies have served as powerful tools for the detection of protein-bound glycans, the development of effective receptors able to integrate in the recognition both the glycan and peptide moieties is still challenging. Here we report a method for selecting aptamers toward the glycosylation site of a protein. It allows identification of an aptamer that binds with nM affinity to prostate-specific antigen, discriminating it from proteins with a similar glycosylation pattern. We also computationally predict the structure of the selected aptamer and characterize its complex with the glycoprotein by docking and molecular dynamics calculations, further supporting the binary recognition event. This study opens a new route for the identification of aptamers for the binary recognition of glycoproteins, useful for diagnostic and therapeutic applications., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Affinity characterization is essential to develop reliable aptamers for tumor biomarker detection. For alpha-fetoprotein (AFP), a biomarker of hepatocellular carcinoma (HCC), two DNA aptamers were described with very different affinity. In this work, we estimate the dissociation constant of both of them by means of a direct assay on magnetic beads modified with AFP and electrochemical detection on carbon screen-printed electrodes (SPCE). Unlike previous works, both aptamers showed similar dissociation constant (K d ) values, in the subµM range. In order to improve the performance of these aptamers, we proposed the isothermal amplification of the aptamers by both terminal deoxynucleotidyl transferase (TdT) and rolling circle amplification (RCA). Both DNA amplifications improved the sensitivity and also the apparent binding constants from 713 nM to 189 nM for the short aptamer and from 526 nM to 32 nM for the long aptamer. This improvement depends on the true affinity of the binding pair, which ultimately limits the analytical usefulness.

Latest technological advancement has tremendously expanded the knowledge on the composition of body fluids and the cancer-associated changes, which has fueled the replacement of invasive biopsies with liquid biopsies by using appropriate specific receptors. DNA emerges as a versatile analytical reagent in electrochemical devices for hybridization-based or aptamer-based recognition of all kind of biomarkers. In this mini review, we briefly introduce the current affordable targets (tumor-derived nucleic acids, circulating tumor cells and exosomes) in body fluids, and then we provide an overview of selected electrochemical methods already applied in clinical samples by dividing them into three large categories according to sample type: red (blood), yellow (urine), and white (saliva and sweat) diagnostics. This review focuses on the hurdles of the complex matrices rather than a comprehensive and detailed revision of the format schemes of DNA-based electrochemical sensing. This diverse perspective compiles some challenges that are often forgotten and critically underlines real sample analysis or clinical validation assays. Finally, the needs and trends to reach the market are briefly outlined., (Copyright © 2020 Miranda-Castro, Palchetti and de-los-Santos-Álvarez.)

Despite having been underappreciated in favor of their protein-coding counterparts for a long time, long noncoding RNAs (lncRNAs) have emerged as functional molecules, which defy the central dogma of molecular biology, with clear implications in cancer. Altered expression levels of some of these large transcripts in human body fluids have been related to different cancer conditions that turns them into potential noninvasive cancer biomarkers. In this review, a brief discussion about the importance and current challenges in the determination of lncRNAs associated to cancer is provided. Different electrochemical nucleic acid-based strategies for lncRNAs detection are critically described. Future perspectives and remaining challenges for the practical implementation of these methodologies in clinical medicine are also discussed.

Cancer diagnosis based on serum biomarkers requires receptors of extreme sensitivity and selectivity. Tunability of aptamer selection makes them ideal for that challenge. However, aptamer characterization is a time-consuming task, not always thoroughly addressed, leading to suboptimal aptamer performance. In this work, we report on the affinity characterization and potential usage of two aptamers against a candidate cancer biomarker, the neutrophil gelatinase-associated lipocalin (NGAL). Electrochemical sandwich assays on Au electrodes and SPR experiments showed a restricted capture ability of one of the aptamers (LCN2-4) and a small detectability of the other (LCN2-2). Interestingly, a truncated version of the signaling aptamer LCN2-2 selectively binds to NGAL covalently linked to magnetic beads due to high local protein concentration. The functional affinity of this aptamer is enhanced by three-orders of magnitude using rolling circle amplification (RCA), completed in only 15 min, followed by hybridization with short complementary fluorescein-tag probes, enzyme labeling and chronoamperometric measurement. Microscale thermophoresis experiments show a poor affinity for the protein in solution, which urges the importance of a full and in-depth characterization of aptamers to be used as diagnostic reagents., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The development of chemical sensors capable of detecting the specific glycosylation patterns of proteins offers a powerful mean for the early detection of cancer. Unfortunately, this strategy is scarcely explored because receptors recognizing the glycans linked to proteins are challenging to discover. In this work, we describe a simple method for directing the selection of aptamers toward the glycan structure of the glycoproteins, with prostate-specific antigen (PSA) as a model target. Using this strategy, we identified one aptamer (PSA-1) that binds the glycan moiety of PSA with reasonable affinity (a dissociation constant of 177 ± 65 nM). Interestingly, an electrochemical sensor with a sandwich format employing the identified aptamer as a signaling receptor, provides a tool of discriminating human PSA from the unglycosylated protein, with a limit of detection of 0.66 ng/mL. The sensor responds to different levels of PSA in serum, correlating well with chemiluminescence ELISA used in hospitals even with higher potential to discriminate clinically meaningful prostate cancer. Although validation on a larger cohort is needed, this is the first demonstration of an aptamer-based sensor to detect PSA by focusing in its glycan moiety., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Herein, we show the feasibility of using deep eutectic solvents as a faster way of selecting aptamers targeting poorly water-soluble species. This unexplored concept is illustrated for gluten proteins. In this way, aptamer-based gluten detection can be performed directly in the extraction media with improved detectability. We envision deep implications for applications not only in food safety control but also in biomedicine., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The integration of nanomaterials in the field of (bio)sensors has allowed developing strategies with improved analytical performance. In this work, ultrasmall core-shell Fe 3 O 4 @Au magnetic nanoparticles (MNPs) were used as the platform for the immobilization of event-specific Roundup Ready (RR) soybean and taxon-specific DNA sequences. Firstly, monodisperse Fe 3 O 4 MNPs were synthesized by thermal decomposition and subsequently coated with a gold shell through reduction of Au(III) precursor on the surface of the MNPs in the presence of an organic capping agent. This nanosupport exhibited high colloidal stability, average particle size of 10.2 ± 1.3 nm, and spherical shape. The covalent immobilization of ssDNA probe onto the Au shell of the Fe 3 O 4 @Au MNPs was achieved through a self-assembled monolayer (SAM) created from mixtures of alkane thiols (6-mercapto-1-hexanol and mercaptohexanoic acid). The influence of the thiols ratio on the electrochemical performance of the resulting electrochemical genoassays was studied, and remarkably, the best analytical performance was achieved for a pure mercaptohexanoic acid SAM. Two quantification assays were designed; one targeting an RR sequence and a second targeting a reference soybean gene, both with a sandwich format for hybridization, signaling probes labelled with fluorescein isothiocyanate (FITC), enzymatic amplification and chronoamperometric detection at screen-printed carbon electrodes (SPCE). The magnetogenoassays exhibited linear ranges from 0.1 to 10.0 nM and from 0.1 to 5.0 nM with similar detection limits of 0.02 nM and 0.05 nM for the event-specific (RR) and the taxon-specific (lectin) targets, respectively. The usefulness of the approach was demonstrated by its application to detect genetically modified organisms (GMOs) in feed and food., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Advances in proteomics have fueled the search for novel cancer biomarkers with higher selectivity. Differential expression of low abundant proteins has been the usual way of finding those biomarkers. The existence of a selective receptor for each biomarker is compulsory for their use in diagnostic/prognostic assays. Antibodies are the receptors of choice in most cases although aptamers are becoming familiar because of their facile and reproducible synthesis, chemical stability as well as comparable affinity and selectivity. In recent years, it has been reported that the pattern of post-translational modifications, altered under neoplastic disease, is a better predictive biomarker than the total protein level. Among others, abnormal glycosylation is attracting great attention. Lectins and antibodies are being used for identification and detection of the carbohydrate moiety with low level of discrimination among various glycoproteins. Such level of selectivity is critical to bring next-generation biomarkers to the clinic. Aptamers that can be rationally tailored for a certain molecule domain can become the golden receptor to specifically detect aberrant glycosylation at each protein or even at each glycosylation site, providing new diagnostic tools for early detection of cancer. Graphical abstract Aptamers may specifically differentiate normal from aberrant glycoproteins.

Highly sensitive testing of nucleic acids is essential to improve the detection of pathogens, which pose a major threat for public health worldwide. Currently available molecular assays, mainly based on PCR, have a limited utility in point-of-need control or resource-limited settings. Consequently, there is a strong interest in developing cost-effective, robust, and portable platforms for early detection of these harmful microorganisms. Since its description in 2004, isothermal helicase-dependent amplification (HDA) has been successfully applied in the development of novel molecular-based technologies for rapid, sensitive, and selective detection of viruses and bacteria. In this review, we highlight relevant analytical systems using this simple nucleic acid amplification methodology that takes place at a constant temperature and that is readily compatible with microfluidic technologies. Different strategies for monitoring HDA amplification products are described. In addition, we present technological advances for integrating sample preparation, HDA amplification, and detection. Future perspectives and challenges toward point-of-need use not only for clinical diagnosis but also in food safety testing and environmental monitoring are also discussed. Graphical Abstract Expanding the analytical toolbox for the detection of DNA sequences specific of pathogens with isothermal helicase dependent amplification (HDA).

Genosensing technology has mostly based on mixed self-assembled monolayers (SAMs) of thiol-modified oligonucleotides and alkanethiols on gold surfaces. However, the typical backfilling approach, which incorporates the alkanethiol in a second step, gives rise to a heterogeneous distribution of oligonucleotide probes on the surface, negatively affecting to both hybridization efficiency and surface stability. Despite aromatic thiols present a remarkably different behavior from alkanethiols, with higher rigidity and stronger intermolecular interactions, they have been scarcely explored for the fabrication of DNA sensing platforms. We have investigated different approaches involving SAMs of aromatic thiols, namely p-mercaptobenzoic acid (p-MBA) and p-aminothiophenol (p-ATP), to yield DNA sensing layers for sequence-specific detection of target oligonucleotides. The studied monolayers were evaluated by DNA surface coverage and further information was obtained by determining their functionality in a sandwich hybridization assay with enzymatic amplification of the electrochemical read-out. The insertion of thiol-oligonucleotides into p-ATP monolayers previously oxidized, and the covalent binding of amino-oligonucleotides to pure p-MBA monolayers give rise to increased storage stability and better analytical performance. The quantification of RNA from Legionella pneumophila cellular lysates was successfully performed, illustrating the usefulness of these sensing architectures for detecting pathogenic bacteria., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The design of screening methods for the detection of genetically modified organisms (GMOs) in food would improve the efficiency in their control. We report here a PCR amplification method combined with a sequence-specific electrochemical genosensor for the quantification of a DNA sequence characteristic of the 35S promoter derived from the cauliflower mosaic virus (CaMV). Specifically, we employ a genosensor constructed by chemisorption of a thiolated capture probe and p -aminothiophenol gold surfaces to entrap on the sensing layer the unpurified PCR amplicons, together with a signaling probe labeled with fluorescein. The proposed test allows for the determination of a transgene copy number in both hemizygous (maize MON810 trait) and homozygous (soybean GTS40-3-2) transformed plants, and exhibits a limit of quantification of at least 0.25% for both kinds of GMO lines.

Nucleic acid aptamers are involved in a broad field of applications ranging from therapeutics to analytics. Deciphering the binding mechanisms between aptamers and small ligands is therefore crucial to improve and optimize existing applications and to develop new ones. Particularly interesting is the enantiospecific binding mechanism involving small molecules with nonprestructured aptamers. One archetypal example is the chiral binding between l-tyrosinamide and its 49-mer aptamer for which neither structural nor mechanistic information is available. In the present work, we have taken advantage of a multiple analytical characterization strategy (i.e., using electroanalytical techniques such as kinetic rotating droplet electrochemistry, fluorescence polarization, isothermal titration calorimetry, and quartz crystal microbalance) for interpreting the nature of binding process. Screening of the binding thermodynamics and kinetics with a wide range of aptamer sequences revealed the lack of symmetry between the two ends of the 23-mer minimal binding sequence, showing an unprecedented influence of the 5' aptamer modification on the bimolecular binding rate constant k on and no significant effect on the dissociation rate constant k off . The results we have obtained lead us to conclude that the enantiospecific binding reaction occurs through an induced-fit mechanism, wherein the ligand promotes a primary nucleation binding step near the 5'-end of the aptamer followed by a directional folding of the aptamer around its target from 5'-end to 3'-end. Functionalization of the 5'-end position by a chemical label, a polydA tail, a protein, or a surface influences the kinetic/thermodynamic constants up to 2 orders of magnitude in the extreme case of a surface immobilized aptamer, while significantly weaker effect is observed for a 3'-end modification. The reason is that steric hindrance must be overcome to nucleate the binding complex in the presence of a modification near the nucleation site.

Methods for the early and sensitive detection of pathogenic bacteria suited to low-resource settings could impact diagnosis and management of diseases. Helicase-dependent isothermal amplification (HDA) is an ideal tool for this purpose, especially when combined with a sequence-specific detection method able to improve the selectivity of the assay. The implementation of this approach requires that its analytical performance is shown to be comparable with the gold standard method, polymerase chain reaction (PCR). In this study, we optimize and compare the asymmetric amplification of an 84-base-long DNA sequence specific for Mycobacterium tuberculosis by PCR and HDA, using an electrochemical genomagnetic assay for hybridization-based detection of the obtained single-stranded amplicons. The results indicate the generalizability of the magnetic platform with electrochemical detection for quantifying amplification products without previous purification. Moreover, we demonstrate that under optimal conditions the same gene can be amplified by either PCR or HDA, allowing the detection of as low as 30 copies of the target gene sequence with acceptable reproducibility. Both assays have been applied to the detection of M. tuberculosis in sputum, urine, and pleural fluid samples with comparable results. Simplicity and isothermal nature of HDA offer great potential for the development of point-of-care devices. Graphical Abstract Comparative evaluation of isothermal helicase-dependent amplification and PCR for electrochemical detection of Mycobacterium tuberculosis.

Celiac disease is a lifelong autoimmune disorder triggered by foods containing gluten, the storage protein in wheat, rye, and barley. The rapidly escalating number of patients diagnosed with this disease poses a great challenge to both food industry and authorities to guarantee food safety for all. Therefore, intensive efforts are being made to establish minimal disease-eliciting doses of gluten and consequently to improve gluten-free labeling. These efforts depend to a high degree on the availability of methods capable of detecting the protein in food samples at levels as low as possible. Current analytical approaches rely on the use of antibodies as selective recognition elements. With limited sensitivity, these methods exhibit some deficiencies that compromise the accuracy of the obtained results. Aptamers provide an ideal alternative for designing biosensors for fast and selective measurement of gluten in foods. This article highlights the challenges in gluten detection, the current status of the use of aptamers for solving this problem, and what remains to be done to move these systems into commercial applications.

Cultivation of genetically modified organisms (GMOs) and their use in food and feed is constantly expanding; thus, the question of informing consumers about their presence in food has proven of significant interest. The development of sensitive, rapid, robust, and reliable methods for the detection of GMOs is crucial for proper food labeling. In response, we have experimentally characterized the helicase-dependent isothermal amplification (HDA) and sequence-specific detection of a transgene from the Cauliflower Mosaic Virus 35S Promoter (CaMV35S), inserted into most transgenic plants. HDA is one of the simplest approaches for DNA amplification, emulating the bacterial replication machinery, and resembling PCR but under isothermal conditions. However, it usually suffers from a lack of selectivity, which is due to the accumulation of spurious amplification products. To improve the selectivity of HDA, which makes the detection of amplification products more reliable, we have developed an electrochemical platform targeting the central sequence of HDA copies of the transgene. A binary monolayer architecture is built onto a thin gold film where, upon the formation of perfect nucleic acid duplexes with the amplification products, these are enzyme-labeled and electrochemically transduced. The resulting combined system increases genosensor detectability up to 10(6)-fold, allowing Yes/No detection of GMOs with a limit of detection of ∼30 copies of the CaMV35S genomic DNA. A set of general utility rules in the design of genosensors for detection of HDA amplicons, which may assist in the development of point-of-care tests, is also included. The method provides a versatile tool for detecting nucleic acids with extremely low abundance not only for food safety control but also in the diagnostics and environmental control areas.

Aptamers are starting to increase the reagents tool box to develop more sensitive and reliable methods for food allergens. In most of these assays, aptamers have to be modified for detection and/or immobilization purposes. To take full advantage of their affinity, which decisively influence the detectability, these modifications must be faced rationally. In this work, a recently developed aptamer for an immunotoxic peptide of gliadin associated to celiac disease is used in different configurations and modified with various markers and anchored groups to evaluate the influence of such modifications on the real affinity. The interaction in solution with the peptide is strong for a relatively small molecule (Kd = 45 ± 10 nM, 17 °C) and slightly stronger than that for the immobilized intact protein due to a cooperative binding effect. Comparatively, while only minor differences were found when the peptide or the aptamer were immobilized, labeling with a biotin resulted preferable over fluorescein (Kd = 102 ± 11 vs 208 ± 54 nM, 25 °C). These findings are of prime importance for the design of an aptamer-based analytical method for gluten quantification., (Copyright © 2015 Elsevier B.V. All rights reserved.)

A highly sensitive electroanalytical method for determination of PQQ in solution down to subpicomolar concentrations is proposed. It is based on the heterogeneous reconstitution of the PQQ-dependent glucose dehydrogenase (PQQ-GDH) through the specific binding of its pyrroloquinoline quinone (PQQ) cofactor to the apoenzyme anchored on an electrode surface. It is shown from kinetics analysis of both the enzyme catalytic responses and enzyme surface-reconstitution process (achieved by cyclic voltammetry under redox-mediated catalysis) that the selected immobilization strategy (i.e., through an avidin/biotin linkage) is well-suited to immobilize a nearly saturated apoenzyme monolayer on the electrode surface with an almost fully preserved PQQ binding properties and catalytic activity. From measurement of the overall rate constants controlling the steady-state catalytic current responses of the surface-reconstituted PQQ-GDH and determination of the PQQ equilibrium binding (Kb = 2.4 × 10(10) M(-1)) and association rate (kon = 2 × 10(6) M(-1) s(-1)) constants with the immobilized apoenzyme, the analytical performances of the method could be rationally evaluated, and the signal amplification for PQQ detection down to the picomolar levels is well-predicted. These performances outperform by several orders of magnitude the direct electrochemical detection of PQQ in solution and by 1 to 2 orders the detection limits previously achieved by UV-vis spectroscopic detection of the homogeneous PQQ-GDH reconstitution.

Here, we demonstrate a new generic, affordable, simple, versatile, sensitive, and easy-to-implement electrochemical kinetic method for monitoring, in real time, the progress of a chemical or biological reaction in a microdrop of a few tens of microliters, with a kinetic time resolution of ca. 1 s. The methodology is based on a fast injection and mixing of a reactant solution (1-10 μL) in a reaction droplet (15-50 μL) rapidly rotated over the surface of a nonmoving working electrode and on the recording of the ensuing transient faradaic current associated with the transformation of one of the components. Rapid rotation of the droplet was ensured mechanically by a rotating rod brought in contact atop the droplet. This simple setup makes it possible to mix reactants efficiently and rotate the droplet at a high spin rate, hence generating a well-defined hydrodynamic steady-state convection layer at the underlying stationary electrode. The features afforded by this new kinetic method were investigated for three different reaction schemes: (i) the chemical oxidative deprotection of a boronic ester by H2O2, (ii) a biomolecular binding recognition between a small target and an aptamer, and (iii) the inhibition of the redox-mediated catalytic cycle of horseradish peroxidase (HRP) by its substrate H2O2. For the small target/aptamer binding reaction, the kinetic and thermodynamic parameters were recovered from rational analysis of the kinetic plots, whereas for the HRP catalytic/inhibition reaction, the experimental amperometric kinetic plots were reproduced from numerical simulations. From the best fits of simulations to the experimental data, the kinetics rate constants primarily associated with the inactivation/reactivation pathways of the enzyme were retrieved. The ability to perform kinetics in microliter-size samples makes this methodology particularly attractive for reactions involving low-abundance or expensive reagents.

A simple and fast electrochemical nucleic acid assay based on a target recycling strategy and the release of a double-stranded DNA intercalating redox probe upon digestion of a specific duplex by exonuclease III is demonstrated.

Thanks to its insensitivity to dioxygen and to its good catalytic reactivity, and in spite of its poor substrate selectivity, quinoprotein glucose dehydrogenase (PQQ-GDH) plays a prominent role among the redox enzymes that can be used for analytical purposes, such as glucose detection, enzyme-based bioaffinity assays, and the design of biofuel cells. A detailed kinetic analysis of the electrochemical catalytic responses, leading to an unambiguous characterization of each individual steps, seems a priori intractable in view of the interference, on top of the usual ping-pong mechanism, of substrate inhibition and of cooperativity effects between the two identical subunits of the enzyme. Based on simplifications suggested by extended knowledge previously acquired by standard homogeneous kinetics, it is shown that analysis of the catalytic responses obtained by means of electrochemical nondestructive techniques, such as cyclic voltammetry, with ferrocene methanol as a mediator, does allow a full characterization of all individual steps of the catalytic reaction, including substrate inhibition and cooperativity and, thus, allows to decipher the reason that makes the enzyme more efficient when the neighboring subunit is filled with a glucose molecule. As a first practical illustration of this electrochemical approach, comparison of the native enzyme responses with those of a mutant (in which the asparagine amino acid in position 428 has been replaced by a cysteine residue) allowed identification of the elementary steps that makes the mutant type more efficient than the wild type when cooperativity between the two subunits takes place, which is observed at large mediator and substrate concentrations. A route is thus opened to structure-reactivity relationships and therefore to mutagenesis strategies aiming at better performances in terms of catalytic responses and/or substrate selectivity.

In this work, the characterisation and the optimisation of hybridisation assays based on a novel, rapid and sensitive micro-analytical, gravity-driven, flow device is reported. This device combines a special chip containing eight polymer microchannels, with a portable, computer-controlled instrument. The device is used as a platform for affinity experiments using oligonucleotide-modified paramagnetic particles. In our approach, both hybridisation and labelling events are performed on streptavidin-coated paramagnetic microparticles functionalized with a biotinylated capture probe. Modified particles, introduced in the microchannel inlet of the chip, accumulate near the electrode surface by virtue of a magnetic holder. After hybridisation with the complementary sequence, the hybrid is labelled with an alkaline phosphatase conjugate. The electrochemical substrate for alkaline phosphatase revelation is p-aminophenyl phosphate. Solutions and reagents are sequentially passed through the microchannels, until enzyme substrate is added for in situ signal detection. Upon readout, the magnet array is flipped away, beads are removed by addition of regeneration buffer, and the so-regenerated chip is ready for further analysis. This protocol has been applied to the analytical detection of specific DNA sequences of Legionella pneumophila, with an RSD=8.5% and a detection limit of 0.33 nM., (Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Human infections with Legionella pneumophila represent a public health problem. Current culture assays for surveillance and control of L. pneumophila in water are time-consuming and limited by the sensitivity, especially when samples also contain microorganisms that inhibit Legionella growth. In this work, an electrochemical method, different from real-time polymerase chain reaction (PCR) approaches, for semiquantitative evaluation of L. pneumophila is presented. A PCR assay targeting the 16S-rRNA gene of L. pneumophila giving rise to a 95-mer amplicon was established. Amplicons were hybridized to a biotin-labeled reporter sequence and then to a thiolated stem-loop structure immobilized onto gold electrodes as a reporter molecule with 1-naphthyl phosphate as a substrate. 1-Naphthol enzymatically generated was determined by differential pulse voltammetry (DPV). For a constant number of amplification cycles, results show that the voltammetric signal is related to the number of copies in the sample thus achieving a useful semiquantitative estimation of L. pneumophila. After 40 cycles of PCR amplification this methodology has a limit of detection of 10 genomes, allowing the reliable detection of 10(2) genomes of L. pneumophila as well as distinguishing 10(3) and 10(4) genomes of the pathogen, values related to corrective actions in water systems in buildings, in accordance with the legislation currently in force.

An electrochemical genosensor for the detection of nucleic acid sequences specific of Legionella pneumophila is reported. An immobilized thiolated hairpin probe is combined with a sandwich-type hybridization assay, using biotin as a tracer in the signaling probe, and streptavidin-alkaline phosphatase as reporter molecule. The activity of the immobilized enzyme was voltammetrically determined by measuring the amount of 1-naphthol generated after 2 min of enzymatic dephosphorylation of 1-naphthyl phosphate. The sensor allows discrimination between L. pneumophila and L. longbeachae with high sensitivity under identical assay conditions (no changes in stringency). A limit of detection of 340 pM L. pneumophila DNA, and a linear relationship between the analytical signal and the logarithm of the target concentration to 2 muM were obtained. Experimental results show the superior sensitivity and selectivity of the hairpin-based assay when compared with analogous sandwich-type assays using linear capture probes.