Search

Color additives are dyes, pigments, or other substances that can impart color when added or applied to foods, drugs, cosmetics, medical devices, or the human body. These substances must be pre-approved by the U.S. Food and Drug Administration (FDA) and listed in the Code of Federal Regulations before they may be used in FDA-regulated products. Both domestic and imported cosmetic products sold in interstate commerce fall under FDA jurisdiction, and FDA's district laboratories use a combination of analytical methods for identifying or confirming the presence of potentially violative color additives. We have developed a qualitative method for identifying 29 water- and methanol-soluble color additives in various types of cosmetic products. The color additives are extracted with combinations of methylene chloride, methanol, acetic acid, and water and are identified by LC with photodiode array detection. Estimated LOD values ranged from 0.1 to 1.5 mg/L. A survey of lip products, nail polishes, eye products, blushes, body glitter, face paints, bath products, creams, and toothpastes identified permitted and non-permitted color additives. Our new LC method is intended to supplement the visible spectrophotometry and TLC methods currently used by FDA's district laboratories and will help optimize the use of time, labor, and solvents.

This study describes a new method for determining FD&C Blue No. 1, FD&C Blue No. 2, FD&C Green No. 3, FD&C Red No. 3, FD&C Red No. 40, FD&C Yellow No. 5, and FD&C Yellow No. 6 in food products. These seven color additives are water-soluble dyes that are required to be batch certified by the U.S. Food and Drug Administration (FDA) before they may be used in food and other FDA-regulated products. In the new method, the color additives are extracted from a product using one of two procedures developed for various product types, isolated from the noncolored components, and analyzed by liquid chromatography with photodiode array detection. The method was validated by determining linearity, range, precision, recovery from various matrices, limit of detection, limit of quantitation, and relative standard deviation for each color additive. A survey of 44 food products, including beverages, frozen treats, powder mixes, gelatin products, candies, icings, jellies, spices, dressings, sauces, baked goods, and dairy products, found total color additives ranging from 1.9 to 1221 mg/kg. FDA intends to use the new method for conducting a rigorous, comprehensive dietary exposure assessment of certified color additives in products likely to be consumed by children.

Colour additives are dyes, pigments or other substances that can impart colour when added or applied to food, drugs, cosmetics, medical devices, or the human body. The substances must be pre-approved by the US Food and Drug Administration (USFDA) and listed in Title 21 of the US Code of Federal Regulations before they may be used in products marketed in the United States. Some also are required to be batch certified by the USFDA prior to their use. Both domestic and imported products sold in interstate commerce fall under USFDA jurisdiction, and the USFDA's district laboratories use a combination of analytical methods for identifying or confirming the presence of potentially violative colour additives. We have developed a qualitative method for identifying 17 certifiable, certification exempt, and non-permitted colour additives in various food products. The method involves extracting the colour additives from a product and isolating them from non-coloured components with a C(18) Sep-Pak cartridge. The colour additives are then separated and identified by liquid chromatography (LC) with photodiode array detection, using an Xterra RP18 column and gradient elution with aqueous ammonium acetate and methanol. Limits of detection (LODs) ranged from 0.02 to 1.49 mg/l. This qualititative LC method supplements the visible spectrophotometric and thin-layer chromatography methods currently used by the USFDA's district laboratories and is less time-consuming and requires less solvent compared to the other methods. The extraction step in the new LC method is a simple and an efficient process that can be used for most food types.