Search

Cereal grains play an important role in human health as a source of macro- and micronutrients, besides phytochemicals. The metabolite diversity was investigated in cereal crops and their milling fractions by untargeted metabolomics ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) of 69 samples: 7 species (barley, oat, pearl millet, rye, sorghum, triticale, and wheat), 23 genotypes, and 4 milling fractions (husk, bran, flour, and wholegrain). Samples were also analyzed by in vitro antioxidant activity. UHPLC-MS/MS signals were processed using XCMS, and metabolite annotation was based on SIRIUS and GNPS libraries. Bran and husk showed the highest antioxidant capacity and phenolic content/diversity. The major metabolite classes were phenolic acids, flavonoids, fatty acyls, and organic acids. Sorghum, millet, barley, and oats showed distinct metabolite profiles, especially related to the bran fraction. Molecular networking and chemometrics provided a comprehensive insight into the metabolic profiling of cereal crops, unveiling the potential of coproducts and super cereals such as sorghum and millet as sources of polyphenols.

Foxtail millet (FM) and green banana (GB) are rich in health-promoting nutrients and bioactive substances, like antioxidants, dietary fibers, and various essential macro and micronutrients. Utilizing GB and FM flour as prebiotics is attributed to their ability to support gut health and offer multiple health benefits. The present study aimed to evaluate the impact of incorporating 10% GB flour (GBF) and different proportions (10-40%) of FM flour (FMF) on the prebiotic potential, antioxidant, nutrient, color, cooking quality, water activity and sensory attributes of noodles. The prebiotic potential, antioxidant, and nutrient of the produced noodles were significantly improved by increasing the levels of FMF. Sensorial evaluation revealed that noodles containing 30% FMF and 10% GBF attained comparable scores to the control sample. Furthermore, the formulated noodles exhibited significantly (p < 0.05) higher levels of protein, essential minerals (such as iron, magnesium, and manganese), dietary fiber (9.37 to 12.71 g/100 g), total phenolic compounds (17.81 to 36.35 mg GA eq./100 g), and total antioxidants (172.57 to 274.94 mg AA eq./100 g) compared to the control. The enriched noodles also demonstrated substantially (p < 0.05) increased antioxidant capacity, as evidenced by enhanced DPPH and FRAP activities, when compared to the control noodles. Overall, the incorporation of 30% FMF and 10% GBF led to a noteworthy improvement in the nutritional and antioxidant qualities of the noodles, as well as the prebiotic potential of the noodles with regard to L. plantarum, L. rhamnosus, and L. acidophilus. The implementation of this enrichment strategy has the potential to confer a multitude of health advantages., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Farzana et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Background: Millet bran (MB), a byproduct of millet production, is rich in functional components but it is underutilized. In recent years, researchers have shown that fermentation can improve the biological activity of cereals and their byproducts. This study used Bacillus natto to ferment millet bran to improve its added value and broaden the application of MB. The bioactive component content, physicochemical properties, and functional activity of millet bran extract (MBE) from fermented millet bran were determined., Results: After fermentation, the soluble dietary fiber (SDF) content increased by 92.0%, the β-glucan content by 164.4%, the polypeptide content by 111.4%, the polyphenol content by 32.5%, the flavone content by 16.4%, and the total amino acid content by 95.4%. Scanning electron microscopy revealed that the microscopic morphology of MBE changed from complete and dense blocks to loosely porous shapes after fermentation. After fermentation, the solubility, water-holding capacity, and viscosity significantly increased and the particle size decreased. Moreover, the glucose adsorption capacity (2.1 mmol g -1 ), glucose dialysis retardation index (75.3%), and α-glucosidase inhibitory (71.4%, mixed reversible inhibition) activity of the fermented MBE (FMBE) were greater than those of the unfermented MBE (0.99 mmol g -1 , 32.1%, and 35.1%, respectively). The FMBE presented better cholesterol and sodium cholate (SC) adsorption properties and the adsorption was considered inhomogeneous surface adsorption., Conclusion: Fermentation increased the bioactive component content and improved the physicochemical properties of MBE, thereby improving its hypoglycemic and hypolipidemic properties. This study not only resolves the problem of millet bran waste but also encourages the development of higher value-added application methods for millet bran. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

Five different millets (foxtail, little, barnyard, kodo and browntop) with and without sprouting were subjected to flaking. Phytic acid and phenolic content tends to decrease significantly, whereas antioxidant activity increased up to 77.32% on flaking of millets. A significant decrease in peak and final viscosity was observed in millet flakes. A-type diffraction pattern was predominant for unsprouted millets whereas the flaked millets showed V-type crystallinity. The protein digestibility significantly increased up to 37.77% in flakes made from sprouted millets. The mineral bioavailability upon flaking of millets increased, especially Ca (88.22% for little), Fe (43.04% for barnyard) and Zn (61.77% for kodo), which is attributed to the reduction in phytic acid. Flaking, however, led to an increase in rapidly and slowly digestible starch with a corresponding decrease in resistant starch. Among the unsprouted and sprouted millet flakes, foxtail received the highest sensory scores for overall acceptability., Competing Interests: Declaration of competing interest The authors state that they have no personal relationships or conflicting financial interests that could have appeared to have an impact on the work discussed in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: Browntop millet has gained popularity in recent years owing to its nutritional superiority and health benefits. However, the usage of browntop millet flours as ingredients in composite flours and functional foods is constrained due to a lack of information regarding the grain composition and its flour functionality. Therefore, the distribution of nutrients, anti-nutrients in browntop millet milled fractions and their flour functionality was evaluated in comparison to whole grain flour., Results: Bran fraction comprised the highest protein (13.7%) and fat contents (27%) among other fractions. Pearling of dehulled grains considerably reduced phytic acid, saponins and flatulence-causing oligosaccharides in pearled grain flours. Besides, this led to the enrichment of soluble fibre, minerals, phenolics and trypsin inhibitors in bran fraction. Milling also impacted flour functionality. Despite its lower water holding ability, dehulled grain flour exhibited significantly higher oil absorption capacity than whole grain flour due to the removal of fibre-rich hull fraction. Although emulsion (45.2%) and foaming capacities (12.5%) were superior in bran flour, foam stability was greater in pearled grain flours., Conclusion: These findings suggest the potential utilisation of browntop millet milled flours as ingredients in the development of distinct food formulations and as partial substitutes to wheat flour in confectionary and bakery products. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

Revolutionizing construction, the concrete blend seamlessly integrates human hair (HH) fibers and millet husk ash (MHA) as a sustainable alternative. By repurposing human hair for enhanced tensile strength and utilizing millet husk ash to replace sand, these materials not only reduce waste but also create a durable, eco-friendly solution. This groundbreaking methodology not only adheres to established structural criteria but also advances the concepts of the circular economy, representing a significant advancement towards environmentally sustainable and resilient building practices. The main purpose of the research is to investigate the fresh and mechanical characteristics of concrete blended with 10-40% MHA as a sand substitute and 0.5-2% HH fibers by applying response surface methodology modeling and optimization. A comprehensive study involved preparing 225 concrete specimens using a mix ratio of 1:1.5:3 with a water-to-cement ratio of 0.52, followed by a 28 day curing period. It was found that a blend of 30% MHA and 1% HH fibers gave the best compressive and splitting tensile strengths at 28 days, which were 33.88 MPa and 3.47 MPa, respectively. Additionally, the incorporation of increased proportions of MHA and HH fibers led to reductions in both the dry density and workability of the concrete. In addition, utilizing analysis of variance (ANOVA), response prediction models were created and verified with a significance level of 95%. The models' R 2 values ranged from 72 to 99%. The study validated multi-objective optimization, showing 1% HH fiber and 30% MHA in concrete enhances strength, reduces waste, and promotes environmental sustainability, making it recommended for construction., (© 2024. The Author(s).)

Introduction: Millets, owing to their rich nutritional and low-to-moderate glycemic index values, are termed superfoods; however, some anti-nutritional factors, such as tannins, limit the absorption of micro and macronutrients. Non-thermal processing technologies, such as fermentation, can improve nutrient content and reduce these anti-nutritional factors., Methods: The effect of a controlled submerged fermentation of whole grain sorghum, pearl millet, and dehusked Kodo millet using mixed lactic acid bacteria (LAB) culture in tofu whey-based media on the proximate, antioxidant, tannin content, vitamin B, amino acids profile and estimated glycemic index (eGI) of different millets were evaluated., Results: The protein content (2-12.5%), carbohydrate content (2-13.6%), antioxidant activity (3-49%), vitamin B complex, amino acid profile (89-90%), and eGI of whole grain sorghum, pearl millet, and dehusked Kodo millet improved due to LAB-assisted submerged fermentation. In contrast, fat (4-15%), ash (56-67%), crude fiber (5-34%), minerals, tannin and resistant starch content decreased due to LAB fermentation., Conclusion: Controlled LAB fermentation can improve the nutritional quality of sorghum and millets while reducing anti-nutritional factors. This non-thermal process can be adopted industrially to produce more palatable and nutritionally superior millet products., Competing Interests: Author Yogesh Sharma is employed by Waters India Pvt. Ltd., New Delhi. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (© 2024 The Author(s). Published by IMR Press.)

This study delves into the transformative effects of atmospheric cold plasma (CP) treatment on little millet flour (LMF), specifically exploring alterations in bioactive compounds, antinutritional factors, and functional properties. Foaming and emulsification properties experienced noteworthy enhancements with plasma treatment, manifesting in significant increases in foaming capacity (up to 51.47 ± 0.49%), foaming stability, emulsification ability, and emulsion stability (up to 47.02 ± 0.35%). The treatment also positively influenced water absorption index and swelling power. Antinutritional factors, including tannins and saponins, exhibited substantial reductions following plasma treatment. Saponin content, for instance, decreased by an impressive 58% after exposure to 20 kV for 20 min. Conversely, bioactive compounds such as phenolic content and antioxidant activity saw significant increases. Total phenolic content (TPC) rose from 527.54 ± 8.94 to 575.82 ± 3.58 mg GAE/100 g, accompanied by a remarkable 59% boost in antioxidant activity. Interestingly, plasma treatment did not exhibit a discernible effect on pasting properties. These findings collectively underscore the potential of atmospheric CP treatment as a novel and effective method for enhancing the functional and nutritional attributes of LMF, thereby opening new avenues for its application in food science and technology., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

This study explored the use of millets flours as a secondary ingredient with soy protein isolate (SPI) to develop fibrous high moisture meat analogue (HMMA). Three millets (sorghum, pearl millet, and finger millet) with three incorporation levels (10%, 20%, and 30%) were extruded at 60%, 65%, and 70% moisture content. The results showed that millet type, incorporation level, and moisture content significantly influenced the system parameters and textural properties. Good visual texturization was achieved at addition of pearl millet up to 30% incorporation level and sorghum and finger millet up to 20% incorporation level. Furthermore, the textural properties of HMMA made from SPI-millet blends were compared against HMMA made from SPI-gluten blend and real chicken. The HMMA made from SPI-millet flour had lower hardness, chewiness, resilience, springiness, tensile strength, cutting strength than that for SPI and SPI-wheat gluten blend and were much closer to corresponding values for real chicken. The results also showed that each of the three millet types generated distinctly different fibre patterns (thick to thin fibres) and colour (whiter to darker) of HMMA. Thus, HMMA produced from SPI-millet flour blends can offer a wide textural, fibre pattern and colour space for different plant-based meat applications. Since millets do not have gluten, they also offer an opportunity to make gluten-free HMMA's., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Background: The increasing health challenge in urban India has led to consumers to change their diet preferences by shifting away from staple cereals and making way for healthier foods such as nutri-cereals like millets and other diverse food groups. Taking the case of millets, this study seeks to uncover the exact drivers for this shift of consumers away from a traditional cereal dense diet to a nutritionally more diverse diet that includes nutri-cereal. We also look at deterrents that dissuade consumers from shifting to millets., Method: We use primary data by surveying respondents through interviews and focused group discussions and online questionnaires. A total of 20 personal consumer interviews and 4 focus group discussions having 8-12 members each were conducted to arrive at the measures for the study. We use logistic regression and Structural Equation Modeling for data analysis. Responses were obtained across major metropolitan cities and tier 2 cities of India thus ensuring representation of geographical, cultural and diet diversity. 875 participants' responses were analysed for results., Results: Health reasons and social networks are the major drivers for shift to millets while lack of awareness, lack of easy availability, high prices, lack of branded products, family being averse to switching to millets and lack of attractive promotional cashbacks and discounts are major deterrents to trying out millets., Conclusions: Diet focussed interventions are urgently needed to curb rising diet related non communicable diseases. Government policies aimed at greater production of millets, running awareness campaigns on mass media and private sector initiatives aimed at generating better value added market offerings could lead the way., (© 2023. BioMed Central Ltd., part of Springer Nature.)

Minor millet grains are the abode of healthy constituents of human concern that contribute to healthy longevity. Additionally, they are excellent in nutritional value including macronutrients namely, protein (7-13%), carbohydrates (60-70%), fat (1.5-5%), fiber (2-7%) and for micronutrients as well namely; iron, calcium, phosphorus, and magnesium, etc. All these beneficial traits along with the availability of bioactive constituents (polyphenols and antioxidants) prove them to be therapeutic in action and also uplift the immunity among users. Employed isolation tactics for starch also govern yield characteristics and is usually preferred by way of wet method. Minor millets are abundant in starch (50-70%) thus application broadness is another attribute which could be addressed in vivid food segments. In case, native starches somehow possess least application credentials in food and non-food sectors thus modification is the only alternative to eliminate shortcomings. As in trend, modification using physical, chemical, and enzymatic ways have a wide impact on the properties of millet starch. The present review summarizes the nutritional, bioactive and therapeutic potential of minor millets, along with ways of starch modification and product development through millet involvement. © 2023 Society of Chemical Industry., (© 2023 Society of Chemical Industry.)

Millets are recently being recognized as emerging food ingredients with multifaceted applications. Whole grain flours made from millets, exhibit diverse chemical compositions, starch digestibility and physicochemical properties. A food matrix can be viewed as a section of food microstructure, commonly coinciding with a physical spatial domain that interacts or imparts specific functionalities to a particular food constituent. The complex millet-based food matrices can help individuals to attain nutritional benefits due to the intricate and unique digestive properties of these foods. This review helps to fundamentally understand the binary and ternary interactions of millet-based foods. Nutritional bioavailability and bioaccessibility are also discussed based on additive, synergistic, masking, the antagonistic or neutralizing effect of different food matrix components on each other and the surrounding medium. The molecular basis of these interactions and their effect on important functional attributes like starch retrogradation, gelling, pasting, water, and oil holding capacity is also discussed., (Copyright © 2022. Published by Elsevier Ltd.)

Various food-derived bioactive peptides have been found with potential anti-inflammatory effects. Millet bran peptide is a food-derived bioactive peptide extracted from millet bran, a by-product of millet processing. In this study, the anti-inflammatory effect of millet bran peptides was investigated. A lipopolysaccharide (LPS)-induced RAW264.7 cell and an animal experiment model were established to test the anti-inflammatory activity of millet bran peptides in vitro . As indicated by the results, millet bran peptides could significantly reduce the levels of inflammatory factors, including tumor necrosis factor-α (TNF-α), interleukin-1β (IL-1β) and prostaglandin E2 (PGE2), in the LPS-induced RAW264.7 cell. As demonstrated by the animal experiment results, millet bran peptides could mitigate the inflammation of spontaneously hypertensive rats (SHRs). According to the western blotting results, millet bran peptides reduced the phosphorylation level of an extracellular signal-related kinase (ERK), I Kappa B (IKB), p65, and p38 of LPS-induced RAW264.7 cells. As indicated by 16S rDNA sequencing analysis results, millet bran peptides could modify the composition of intestinal microbes. In brief, millet bran peptides could have anti-inflammatory activities in vivo and in vitro and mitigate the inflammation of LPS-induced RAW264.7 cells by regulating the signaling pathways of nuclear factor-κB (NF-κB) and mitogen-activated protein kinase (MAPK). The above research has laid a theoretical basis for the application of plant-derived peptides in health food.

Aflatoxin (AFT) contamination, commonly in foods and grains with extremely low content while high toxicity, has caused serious economic and health problems worldwide. Now researchers are making an effort to develop nanomaterials with remarkable adsorption capacity for the identification, determination and regulation of AFT. Herein, we constructed a novel hollow-structured microporous organic networks (HMONs) material. On the basis of Fe 3 O 4 @MOF@MON, hydrofluoric acid (HF) was introduced to remove the transferable metal organic framework (MOF) to give hollow MON structures. Compared to the original Fe 3 O 4 @MOF@MON, HMON showed improved surface area and typical hollow cavities, thus increasing the adsorption capacity. More importantly, AFT is a hydrophobic substance, and our constructed HMON had a higher water contact angle, greatly enhancing the adsorption affinity. From that, the solid phase extraction (SPE-HPLC) method developed based on HMONs was applied to analyze four kinds of actual samples, with satisfied recoveries of 85-98%. This work provided a specific and sensitive method for the identification and determination of AFT in the food matrix and demonstrated the great potential of HMONs in the field of the identification and control of mycotoxins.

Millets are a traditional staple food of the dryland regions of the world and are rich in essential nutrients like protein, fatty acids, minerals, vitamins, and dietary fiber. Also, millets commonly synthesize a range of secondary metabolites to protect themselves against adverse conditions. These factors are collectively termed anti-nutritional factors and the existence of these factors in millets might reduce the accessibility of the nutrients in humans. Some of these factors include protease inhibitors, tannins, non-starch polysaccharides-glucans, phytates, and oxalates each of which might directly or indirectly affect the digestibility of nutrients. Methods like soaking, germination, autoclaving, debranning, and the addition of exogenous enzymes have been used to reduce the anti-nutritional factors and elevate the bioavailability of the nutrients. This review summarizes various methods that have been used to improve nutrient bioavailability, specifically emphasizing the use of enzymes to improve nutrient bioavailability from millets. © 2021 Society of Chemical Industry., (© 2021 Society of Chemical Industry.)

The demand for millets and their products is becoming popular globally due to their various health-promoting properties. The major constituent of the millet is its starch which contributes about 70% of total millet grain and decides the quality of millet-based food products. The application of starch for various purposes is dependent upon its physicochemical, structural, and functional properties. A native starch does not possess all the required properties for a specific use. However, product-specific properties can be achieved by modifying the structure of starches. Information deficit on millet starch has undermined its potential use in new food product design. The objective of this review is to examine the chemical composition, characterization, structural chemistry, digestibility, hydrolysis, and modification techniques of the millet starches. The review paper also discusses the various applications of native and modified starches in the food industry., Competing Interests: Declaration of competing interest The authors have declared no conflict of interest., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The tight association between malnutrition and gut microbiota (GM) dysbiosis enables microbiota-targeting intervention to be a promising strategy. Thus, we used a malnourished pig model to investigate the host response and GM alterations under different diet supplementation strategies. Pigs at age of 4 weeks were fed with pure maize diet to induce malnutrition symptoms, and followed by continuous feeding with maize (Maize, n = 8) or re-feeding using either corn-soy-blend (CSB+, n = 10) or millet-soy-blend based (MSB+, n = 10) supplementary food for 3 weeks. Meanwhile, 8 pigs were fed on a standard formulated ration as control (Ref). The effect of nutritional supplementation was assessed by the growth status, blood chemistry, gastrointestinal pathology, mucosal microbiota composition and colon production of short-chain fatty acids. Compared with purely maize-fed pigs, both CSB+ and MSB+ elevated the concentrations of total protein and globulin in blood. These pigs still showed most malnutrition symptoms after the food intervention period. MSB+ had superior influence on the GM development, exhibiting better performance in both structural and functional aspects. MSB+ pigs were colonized by less Proteobacteria but more Bacteroidetes, Firmicutes and Lachnospira spp. Pearson's correlation analysis indicated a strong correlation between the abundance of mucosal e.g., Faecalibacterium and Lachnospira spp. and body weight, crown-rump length and total serum protein. In conclusion, the malnutrition symptoms were accompanied by an aberrant GM, and millet-based nutritional supplementation showed promising potentials to restore the reduced GM diversity implicated in pig malnutrition., Competing Interests: The authors’ commercial affiliation at BGI-Shenzhen does not alter our adherence to PLOS ONE policies on sharing data and materials.

Weaning is the gradual process of introducing solids or semisolid foods into an infant's diet, in order to ensure their healthy growth. This study developed two kinds of formula weaning food based on roasted or extruded quinoa and millet flour, and evaluated their quality. A fructo-oligosaccharide (FOS)/galacto-oligosaccharide (GOS) mix was added to provide the prebiotic potential. The protein contents of the roasted quinoa-millet complementary food (RQMCF) and extruded quinoa-millet complementary food (EQMCF) were 16.7% and 17.74% higher, respectively, than that of commercial millet complementary food (CMCF). Both RQMCF and EQMCF provided sufficient levels of energy and minerals. Extrusion provided the foods with a lower viscosity, and higher solubility and water absorption ability than roasting. In vitro digestion results showed that EQMCF exhibited the highest starch and protein digestibility (89.76% and 88.72%, respectively) followed by RQMCF (87.75% and 86.63%) and CMCF (83.35% and 81.54%). The digestas of RQMCF and EQMCF after in vitro digestion exhibited prebiotic effects by promoting the growth of the probiotics (Lactobacillus plantarum and Lactobacillus delbrueckii). These results will contribute to developing complementary weaning foods for infants. PRACTICAL APPLICATION: This study has shown that extrusion is an efficient and stable processing method for producing infant complementary foods with low density, balanced nutrition, and high levels of starch and protein digestibility. Extruded quinoa-millet prebiotic complementary food can also promote the proliferation of probiotics. This will provide a new direction for developing novel infant formula weaning foods., (© 2021 Institute of Food Technologists®.)

A multi-colorimetric immunosensor basing on the mimetic enzyme etching of gold nanobipyramids (Au NBPs) was established to detect ochratoxin A (OTA). Octahedral Cu 2 O nanoparticles were successfully synthesized through a selective surface stabilization strategy, which can exhibit a peroxidase-like ability to oxidize 3,3',5,5'-tetramethylbenzidine (TMB). Au NBPs can be etched by the product, TMB 2+ , to form a significant longitudinal peak blue shift of local surface plasmon resonance. During the construction of the immunosensor, the microplate was coated with dopamine to immobilized OTA antigens, followed by the immunoreaction of OTA antibody and the Cu 2 O-labled secondary antibody. A linear relationship can be found between the local surface plasmon resonance (LSPR) peak changes with the logarithm of OTA concentration in a wide range from 1 ng/L to 5 μg/L, while the detection limit was 0.47 ng/L. Meanwhile, the approximate OTA concentration can be conveniently and intuitively observed by the vivid color changes. Benefiting from the high specificity, the proposed multi-colorimetric immunoassay detection of OTA in millet samples was achieved, indicating the available potential of the immunoassay for the determination of OTA in real samples.

Objectives: The aim of the current study was to compare the physicochemical and disintegrant properties of pearl millet starch with other starches using paracetamol as model drug., Methodology: Determination of percentage yield, Physicochemical, micrometrics characteristics of starch/granules, drug excipients compatibility studies and evaluation of prepared paracetamol tablets were measured using official techniques., Results: The yield of the millet starch ranged from 30 to 40%. Moisture content 8.77%, pH 5.7, Swelling capacity 1.2, Hydration capacity 1.748, Moisture uptake 11.8%, Amylose 24.6%, with poor flowability and compressibility. No significant difference in hardness, friability% & disintegration times for formulations containing millet starch to that containing potato and maize starch (P>0.05)., Conclusion: From the study, Millet seeds locally cultivated in Sudan gave a high yield of starch, has same physicochemical properties as maize and potato starch so can be used as an alternative to those starches., (Copyright © 2020 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.)

Paste made from eight types of cereal grains (low fiber containing grains [LF grains]: rice, sticky rice, black rice, and millet; and high fiber containing grains [HF grains]: wheat, buckwheat, oat, and barley), and four types of legumes (soybean, red bean, kidney bean, and mung bean), were studied in terms of particle size, rheological, and tribological properties. Sticky rice and soybean pastes showed lower yield stress, viscosity and consistency coefficient than other pastes. Most cereal pastes showed a major peak at approximately 160 µm except for oat and barley, while legume pastes showed mono modal profiles except for soybean. Tribological results showed that starch tended to develop type A friction profiles, showing a typical Stribeck curve; bran/fiber tended to develop type B profiles, showing an ascent curve with clear onset of hydrodynamic regime; protein and lipids promoted type C profiles, showing a flat plateau shaped curve. Water soluble polysaccharides in grains or legumes could improve the paste lubrication. In general, 5% of the black rice paste and sticky rice in the LF grain group, and the soybean paste in the legume group, showed a low friction coefficient (μ) in the entire entrainment speed range; barley paste and oat paste in the HF grain group showed relatively low μ at low entrainment speed (0.5 mm/s) and medium entrainment speed (5 and 10 mm/s), respectively., (© 2020 Institute of Food Technologists®.)

Cereal-based fermented products are becoming popular in the world. A millet-based yogurt-like product (MYP) using polymerized whey protein (PWP) and xanthan gum (XG) as thickeners was developed. The present study aimed to investigate the effects of PWP (0.3 to 0.5%, w/v) and XG (0 to 0.2%, w/v) on the gelation properties and microstructure of MYP. All samples were analyzed for rheological properties, textural properties, microstructure, and pH value during fermentation. The MYP Ⅲ (0.4% PWP and 0.1% XG) registered the highest elastic modulus (G') throughout the fermentation and cooling steps (P < 0.05), but MYP Ⅳ (0.35% PWP and 0.15% XG) had the highest apparent viscosity compared with the other samples. No significant differences in the pH values among the samples were observed during the fermentation process (P > 0.05). The hardness value of MYP Ⅳ reached a maximum after 4 hr and then stabilized during fermentation. Scanning electron microscopy showed a compact and uniform network for the MYP with PWP and XG. MYP Ⅳ had the best texture properties (hardness, springiness, and gumminess). Overall, PWP (0.35%, w/v) and XG (0.15%, w/v) were the best combination for MYP as a thickening system. PRACTICAL APPLICATION: Cereal-based fermented products have attracted much attention in the food industry. However, due to absence of a natural protein network, it is hard to produce a set-type millet-based yogurt with a firm texture under the studied conditions without adding any thickening agents. In this study, PWP (0.35%, w/v) and XG (0.15%, w/v) can be used for fermentation of millet-based yogurt-like products. The new cereal-based fermented product would be a promising food in the market., (© 2020 Institute of Food Technologists®.)

Proso millet exhibits favorable agronomic and nutritional properties but is currently under-utilized in the northern hemisphere. This study compared processing-induced changes in protein characteristics of commercial pasta to fresh gluten-free pasta from proso millet varieties differing in prolamin profile. Protein solubility, accessible thiols and secondary structures were measured in dough, sheeted and cooked pasta. Relationships between protein conformation and characteristics related to pasta quality were determined. Cooking significantly lowered protein solubility and induced exposure of thiol groups as well as a shift in secondary structure distribution, while sheeting only had a minor effect. Random structures positively and significantly (P < 0.05) correlated with solubility, cooking loss and protein digestibility. In contrast, β-sheets, the main secondary structure in cooked pasta, negatively correlated with these properties. The utilization of proso millet in gluten-free pasta is promising, however, processing optimization to elicit targeted protein modifications to balance quality and nutritional attributes requires further investigation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Starch nanoparticles from pearl (Pe) and proso (Pr) millets were characterised for morphological, thermal, rheological and nutraceutical properties which are important parameters to be considered for predicting applicable domain of nanoparticles in food and other industrial applications. In the present study after using collision ball milling to achieve the nano-reduction, dynamic light scattering (DLS) revealed the average hydrodynamic particle diameter of 636 nm and 417 nm for nano-reduced pearl (PeN) and proso (PrN) millet starches. Further the nano-particles produced were having greater stability, as revealed by the data obtained for zeta potential. X-ray diffraction (XRD) revealed loss of crystallinity in starch granules whereas attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) showed no difference in the basic functional groups but decrease in intensity. Scanning electron microscopy (SEM) was used to elicit the changes in surface topography of starch granules upon nano-reduction. Post nano-reduction treatment various thermal transition temperatures significantly shifted to lower values. Results of anti-oxidant assays for prediction of nutraceutical potential revealed significant increase upon nano-reduction., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Surface-imprinted polymers supported by hydroxyapatite (HAP@MIPs) were prepared using coumarin-3-carboxylic acid and naringenin as dummy template molecules of zearalenone (ZEA). HAP@MIPs were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, particle size distribution analysis, energy-dispersive X-ray spectroscopy, and X-ray diffraction. The adsorption performance was studied. The results showed that it could reach the adsorption equilibrium within 6 min. The adsorption amount could reach 6.77 μg mg -1 , while the concentration was 20 μg mL -1 . The self-made solid-phase extraction (SPE) columns were prepared with HAP@MIPs as sorbents for the separation and purification of ZEA in cereal samples. The method was established by high-performance liquid chromatography (HPLC). The recoveries were in the range of 70.09-101.88%; the relative standard deviation was 2.06-8.47%. Finally, millet, coix lachryma, and corn were placed under extreme conditions to produce ZEA. The method was used to extract and analyze ZEA in the above samples. The results showed that self-made SPE columns with HPLC could be used for the separation and enrichment of ZEA in real samples. Graphical abstract.

In this study, 15 different mycotoxins were estimated in three staple cereals from selected agro-ecological regions in Nigeria using a 'novel' green extraction method, pressurized hot water extraction (PHWE) in comparison to a conventional solvent extraction method. Discrimination of the results of PHWE and solvent extraction using principal component analysis (PCA) and orthogonal projection to latent structures discriminate analysis (OPLS-DA) did not yield any differential clustering patterns. All maize samples (n = 16), 32% (n = 38) of sorghum and 35% (n = 37) of millet samples were positive for at least one of the 15 tested mycotoxins. Contamination levels for the cereals were higher in the warm humid rain forest region and gradually decreased towards the hot and arid region in the north of the country. The results demonstrate the applicability of PHWE as a possible alternative extraction method to conventional methods of extraction, which are solvent based.

The objective of this study was to evaluate the impact of sprouting (0, 12, 24, 36, 48 hr) on enzyme activity, protein solubility, dough mixing behavior, anti-nutritional components and in vitro starch and protein digestibility of minor millets. Sprouting decreased starch, fat, protein and ash contents while the dietary fiber content, amylase and protease activity significantly (p < 0.05) increased. Sprouting promoted a significant (p < 0.05) decrease in anti-nutritonal components like phytic acid and condensed tannin. The protein solubility enhanced that also resulted in improved protein digestibility (in vitro) of sprouted millets. Sprouting exerted a significant (p < 0.05) effect on mixolab dough rheology indicating a decrease in dough consistency (C1), peak and final viscosity whilst protein weakening and breakdown increased (p < 0.05). This process produced an increase in free glucose thereby improving rapidly digestible starch and increasing glycemic index. A significant (p < 0.05) reduction in resistant starch along with slowly digestible starch was promoted during sprouting. In conclusion, sprouting provides millet flours with modified nutritional quality and better technofunctional properties than the raw flours that may suggest their potential utilization in complementary food formulations and baked products., Competing Interests: Declaration of Competing Interest The authors declare that they have no competing interests., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Millet flour (water washed or alkali washed) was replaced with wheat flour (WF) at 0, 25, 50, 75, and 100% levels. Objectives of the research were to characterize the flour blends for their technical properties and to produce cookies with less or no gluten contents. All types of flour blends were evaluated for their pasting properties. The cookies were baked and evaluated for their textural and physical attributes. Inclusion of millet flour (both types) in wheat flour resulted in significant reduction in peak and final viscosities while setback viscosities were affected non-significantly. Pasting temperature was increased from 65 ℃ (100% wheat flour) to 91 ℃ (100% millet flour). The hardness of cookies was reduced in the presence of millet flour. Fracturability values of cookies with higher millet flour were higher as compared to control cookies (prepared from 100% wheat flour). Cookies prepared from blends having more that 50% millet flour were not much liked by sensory panelists. The phenolic contents of cookies containing higher levels of either water washed or alkali washed millet flour were found to be higher when compared to cookies prepared from plain WF (1.90 ± 0.14 mg gallic acid/g sample). The 2,2-diphenyl-1-picrylhydrazyl activity (%) of cookies ranged from 16.39 ± 0.34 (100% water washed millet flour) to 10.39 ± 0.26 (100% WF; control). The study will help the non-coeliac people to consume low gluten (≈1.6-6.5%) or gluten intolerant people to consume gluten-free cookies (0%) from millet flour having abundant of antioxidants and health-promoting polyphenols.

A method based on asymmetrical flow field-flow fractionation (AF4) coupled with a multi-angle light scattering detector and a differential refractive detector was developed for the separation and characterization of millet starch. In this study, the effects of sample loading, cross-flow rate, half-life, and ionic strength and pH value of the carrier liquid on the AF4 analysis of millet starch were investigated. In addition, the molecular structure of millet starch was determined under the optimum conditions. The optimized operation conditions for the AF4 analysis of millet starch were as follows:injection mass concentration, 0.50 g/L; injection volume, 50 μL; cross-flow rate, 1.2 mL/min; half-life, 3 min; and the carrier liquid, demonized water containing 10 mmol/L pH 7.00 NaNO 3 (add 3 mmol/L NaN 3 ). The method developed in this study showed good reproducibility. The relative standard deviations for the radius of gyration ( R g ) and molar mass ( M w ) were 3.4% and 7.0%, respectively.

Flakes are an assortment of grain products mainly consumed for breakfast. Most of them are important source of nutrients including minerals. Twenty commercial flakes from different raw materials were included in this study, both gluten (barley, rye, spelt, wheat) and gluten-free (amaranth, buckwheat, corn, quinoa, millet, oat, rice, teff). The content of minerals (Ca, Fe, K, Mg, Mn, Na and Zn), dietary fiber (total, soluble and insoluble), tannins and phytates was determined. Moreover, the phytates:mineral molar ratios and the percentage of the realization of mineral requirements were calculated. For the first time the mineral bioavailability from the gluten and gluten-free flakes was evaluated and compared. It allowed indicating amaranth and teff products as flakes with the highest impact on the realization of daily requirements for minerals, especially for magnesium and iron. This aspect is particularly important for people on a gluten-free diet who often represent mineral deficiencies., (Copyright © 2019. Published by Elsevier Ltd.)

Extraction of free and bound phenols from millet in acidic and basic hydrolytic conditions were compared for the first time. Acidic hydrolysis was able to extract the highest amount of total phenolic compounds (up to 178 mg/100 g) while the basic hydrolysis underestimates the phenolic concentration. Our findings pointed out for the first time that methyl ferulate is naturally present as bound phenol in millet. Response Surface Methodology was then applied to both acidic and basic hydrolytic extractive conditions: the acidic procedure, optimized in terms of extractive time and temperature and concentration of the acidic mean, gave the best results, allowing definition of Method Operable Design Region and quantitation of the total amount of phenols in millet samples in a single extractive step. This optimized method is suitable for further accurate investigations of the typical phenols of the numerous varieties of this recently re-discovered minor cereal., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Background: The present study examined the potential for 'Smart Food' with respect to contributing to the Sustainable Development Goal 2 of ending malnutrition by 2030, using a small-scale capacity building case study in Oe Be Village, Myingyan district, Mandalay region, Myanmar. Within the study site, refined white rice is the major staple, followed by vegetables and animal source food in inadequate quantities. The protein intake in this particular dry zone community meets only 50% of the daily requirement and even less for those children aged less than 23 months. Therefore, to determine the acceptance and opportunity for legumes and millets which are produced locally, nutritious formulations were introduced for various age groups. In addition, a sensory evaluation of the recipes was conducted to test the acceptance of the nutritious products., Results: Two weeks of the inclusion of millets and pigeonpea in the diets of children aged 6-23 months had a positive impact on wasting, stunting and underweight (P = 0.002, 0.014 and 0.023, respectively). Moreover, the acceptability of these new food products by the children was found to be high. These results indicate an unexplored opportunity for specific millets rich in iron, zinc and calcium, as well as for pigeonpea rich in protein, if prepared in a culturally acceptable way., Conclusion: The impact and acceptability of this small scale and short-term intervention indicate the potential for Smart Food products in filling the nutrition gap arising from the traditional food consumption habits in the dry zones of Myanmar. © 2019 Society of Chemical Industry., (© 2019 Society of Chemical Industry.)

As two novel starch modification technologies, the comparative study between microwave (MC) and ultrasound (UC) is of important significance for their applications. The objective of this work is to compare the changes of millet starch with MC and UC, focusing on the viscosity, swelling power (SP), transparency (TR), short-range molecular order (FT-IR spectrum), thermal properties (DSC), long-range molecular order (X-ray diffraction), in vitro enzymatic digestibility, and morphological properties. MC changed the type of the pasting curves form B-type to C-type, and the maximum decrease of the peak viscosity and relative crystallinity of MC starch was 74.9% and 100%, however, these changes for UC starch were only 14.8% and 23.2%. MC decreased the SP, TR, DSC, and ratio of absorbances at 1047/1022 cm -1 , but UC caused opposite trend of these properties. Both MC and UC increased the in vitro enzymatic digestibility by 26.7% and 13.3%, respectively. MC also destroyed the original appearance of the starch granules and formed smaller and lamellar gel blocks. In conclusion, MC had greater influence on starch structure and properties than UC, even in a short period., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Background: Dietary phytate inhibits zinc absorption from composite meals in adults., Objective: The objective of this study was to investigate the effect of adding exogenous phytase to a small-quantity lipid-based nutrient supplement (SQ-LNS) on zinc absorption among young children., Methods: In a double-blind randomized controlled trial, intraindividual differences in fractional and total absorption of zinc (FAZ and TAZ, respectively) from a millet-based porridge containing SQ-LNS with and without phytase were measured in 30 asymptomatic children 18-23 mo of age in the Kiang West district of The Gambia. Using a crossover design, children received for 1 d each porridge test meals with 20 g SQ-LNS containing 8 mg zinc and either 1) exogenous phytase or 2) no exogenous phytase. The test meals were provided on consecutive days in randomized order. FAZ was measured using a triple stable isotope tracer ratio technique with Zn-67 and Zn-70 as oral tracers and Zn-68 as the intravenous tracer., Results: Twenty-six participants completed the study. The prevalence of stunting and wasting were 20% and 13%, respectively; no children had low plasma zinc concentrations (<65 μg/dL). Total mean ± SD dietary zinc intake from the test meals was 7.3 ± 2.2 mg (phytate:zinc molar ratio = 3.1 ± 0.3, not accounting for phytase activity). Mean FAZ increased from 8.6% ± 1.3% to 16.0% ± 1.3% when exogenous phytase was added to the SQ-LNS product (P < 0.001). Mean TAZ from test meals containing SQ-LNS with phytase was more than double that from test meals containing SQ-LNS without phytase (1.1 ± 0.1 mg and 0.5 ± 0.1 mg, respectively; P < 0.001)., Conclusions: The addition of exogenous phytase to SQ-LNS increased both FAZ and TAZ. These results suggest that phytate reduction may be an important strategy to increase zinc absorption among young children. This trial was registered at clinicaltrials.gov as NCT02668133., (Copyright © American Society for Nutrition 2019.)

The nutritional and antinutritional components of minor millets were correlated with mixolab dough mixing behavior and in vitro protein and starch digestibility. Total arabinoxylan (r = -0.53, p < 0.05) and dietary fiber (r = -0.66, p < 0.05) content significantly (p < 0.05) increased protein weakening. Peak viscosity negatively correlated with phenolic (r = -0.55, p < 0.05) content. The dietary fiber and phenolics suppressed retrogradation. Protein digestibility negatively correlated with tannin (r = -0.70, p < 0.05), phytic acid (r = -0.69, p < 0.05), phenolics (r = -0.79, p < 0.05), flavonoids (r = -0.72, p < 0.05) and total dietary fiber content (r = -0.84, p < 0.05). A positive correlation of resistant starch (RS) with total dietary fiber (r = 0.85, p < 0.05), phenolics (r = 0.89, p < 0.05), flavonoids (r = 0.83, p < 0.05), phytic acid (r = 0.43, p < 0.05) and tannin content (r = 0.79, p < 0.05) was observed. Millets predicted lower glycemic index than wheat and it was found to be negatively associated with the RS (r = -0.96, p < 0.05) and total dietary fiber content (r = -0.89, p < 0.05) and positively correlated (r = 0.98, p < 0.05) with rapidly digestible starch. The millets may be diversified for personalized nutrition and development of functional food., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

In this study, some physico-chemical properties, amino acids, fatty acids, sugars and mineral contents of sorghum, millet and lupin seeds. Sorghum (red, white and yellow) and millet seeds were purchased from market in Saudi Arabia (Riyadh). Lupin seeds were provided from in Turkey (Konya). Protein contents of seed samples ranged from 8.6% (yellow sorghum) to 37.7% (lutop) (p < 0.05). The extractable phenolics contents for gallic acid equivalent (GAE) of grains ranged between 1.43 mgGAE/g (white sorghum) to 8.23 mgGAE/g (red sorghum), and hydrolysable phenolics contents for GAE of grains varied between 1.48 mgGAE/g (white sorghum) to 26.10 mgGAE/g (red sorghum (p < 0.05). Total phenol contents of seeds were found between 2769 mg GAE/g (bablon) to 6087 mgGAE/g (yellow sorghum) (p < 0.05). Amino acid contents of millet changed between 0.02% (ornithine) and 2.07% (glutamic acid), while amino acid contents of yellow sorghum range from 0.02% (hydroxyproline) to 1.71% (glutamic acid), amino acid values of white sorghum changed between 0.02% (hydroxyproline) and 2.21% (glutamic acid), amino acid values of lutop seed changed between 0.02% (ornithine) and 6.77% (glutamic acid) (p < 0.05).While the oleic acid contents change between 25.27% (white sorghum) and 53.50% (Bablone), linoleic acid contents ranged from 14.60% (Bablone) to 42.67% (Millet) (p < 0.05). However, the amount of potassium in the seeds varied between 1831.34 mg/kg (while sorghum) and 11895.8 mg/kg (Lutop). Generally, protein, oleic acid, amino acid and mineral contents of lupin varieties were higher as compared to those of millet phenol, anthocyanin and sorghum seeds.

Background: Mycotoxins such as aflatoxins (AFs) and ochratoxin A (OTA) can pose severe health hazards because of their toxicity. Given a wide range of food matrices susceptible to fungal infections and possible cooccurrence of mycotoxins at different concentrations, validated multimycotoxin and multimatrix methods are strongly warranted. Objective: The aim of this research was to develop a simple and fast ultra-high performance LC (UHPLC) fluorescence detection (FLD)-based method to simultaneously determine AFs (B1, G1, B2, and G2) and OTA and, furthermore, to carry out single-laboratory validation in a range of cereals and processed product matrices. Methods: The sample preparation involved homogenization and extraction with methanol-water (80 + 20). For cleanup, an aliquot (3 mL) was diluted with phosphate-buffered saline, loaded on an immunoaffinity column (AFLAOCHRA PREP ® ), and eluted with methanol (1 mL). The cleaned extract was diluted with 0.2% acetic acid (at a 1:1 ratio) before injection into an ultra-high performance liquid chromatograph. To perform simultaneous analysis of AFs and OTA, the FLD program was developed by switching the excitation wavelength in a single chromatographic run. Results: The method provided LOQs of 0.25 and 1 ng/g for AFs and OTA, respectively, without involving any derivatization. In rice, the recoveries of AFs ranged from 84 to 106%, whereas OTA had a recovery above 72%, with the repeatability relative SDs <12% for both analytes. The method was successfully applied to a range of naturally contaminated market samples. Conclusions: The method is suitable for regulatory testing because of its significant time and cost effectiveness and sensitivity in compliance with the regulatory maximum levels. Highlights: The study achieves high-throughput analysis of AFs and OTA in raw and processed cereals using simultaneous extraction, cleanup, and UHPLC-FLD. Method sensitivity complies with the regulatory maximum levels. Single-laboratory validation results meet analytical QC requirements.

Millets can be sustainable food sources in future agronomy because of its ability to flourish in harsh climatic conditions, however limited studies exist on the nutritional and hypoglycaemic properties of millets. This study is intended to identify millets as potential functional food ingredients based on their nutrient profile and in vitro starch digestibility. Seven millet types exhibiting diverse structures and compositions were investigated. Chemical composition revealed that depending on the millet type, millets are excellent sources of insoluble dietary fibre, lipids and minerals, these components had values ranging from 9.3-56.7 mg/g, 11.5-31.7% and 2.1-8.0%, respectively. Linoleic and oleic were the major unsaturated fatty acids detected in all the millet types. Millets were also found to be rich in free and bound phenolic acids. Kodo millet was found to have the highest free and bound phenolic contents. Expected glycemic index of millets ranged between 42.7 and 58.3, hence making them some valuable low GI food sources for diabetics. The obtained results may suggest that millets with its superior nutrient profile and hypoglycaemic property could be a promising ingredient for the functional food industry.

In this study, the physicochemical and in vitro digestion of millet starch with different moisture content after microwave treatment were investigated. The structure and property changes of native (NA) and microwave treated (MT) millet starches were characterized using Brabender viscometer, Fourier transforms infrared spectroscopy (FT-IR), Differential scanning calorimeter (DSC), X-ray diffraction (XRD) and Scanning electron microscopy (SEM). Microwave treatment caused a decrease of the peak viscosity, swelling power, ΔH and relative crystalline, and an increase of the transparency, T O , T C , and ΔT. The extent of these changes depended on the moisture content of starches. The in vitro enzymatic digestibility of samples increased greatly, especially at a moisture content of >40%. It is interesting to note that the peak of the hydroxyl group shifted toward the lower wavenumber direction and the decrease of peak intensities at 1047 cm -1 and 1022 cm -1 in FT-IR spectra indicated that higher moisture content enhanced the inter-molecular hydrogen bonding and caused more serious damage to the crystalline and amorphous regions. Cracks and center cavities were observed on the granules surface and the original appearance of starch disappeared gradually as the moisture content increases. In conclusion, high moisture content can enhance the effect of the microwave to millet starch., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Prior to the introduction of wheat and barley from Central Asia during the Neolithic period, northern Chinese agricultural groups subsisted heavily on millet. Despite being the focus of many decades of intensive interest and research, the exact route(s), date(s), and mechanisms of the spread and adoption of wheat and barley into the existing well-established millet-based diet in northern China are still debated. As the majority of the important introduced crops are C3 plants, while the indigenous millet is C4, archaeologists can effectively identify the consumption of any introduced crops using stable carbon isotope analysis. Here we examine published stable isotope and dental caries data of human skeletal remains from 77 archaeological sites across northern and northwestern China. These sites date between 9000 to 1750 BP, encompassing the period from the beginning of agriculture to wheat's emergence as a staple crop in northern China. The aim of this study is to evaluate the implications of the spread and adoption of these crops in ancient China. Detailed analysis of human bone collagen δ13C values reveals an almost concurrent shift from a C4-based to a mixed C3/ C4- based subsistence economy across all regions at around 4500-4000 BP. This coincided with a global climatic event, Holocene Event 3 at 4200 BP, suggesting that the sudden change in subsistence economy across northern and northwestern China was likely related to climate change. Moreover, the substantially increased prevalence of dental caries from pre-to post-4000 BP indicates an increase in the consumption of cariogenic cereals during the later period. The results from this study have significant implications for understanding how the adoption of a staple crop can be indicative of large-scale environmental and socio-political changes in a region., Competing Interests: The authors have declared that no competing interests exist.

The available cultivable plant-based food resources in developing tropical countries are inadequate to supply proteins for both human and animals. Such limition of available plant food sources are due to shrinking of agricultural land, rapid urbanization, climate change, and tough competition between food and feed industries for existing food and feed crops. However, the cheapest food materials are those that are derived from plant sources which although they occur in abundance in nature, are still underutilized. At this juncture, identification, evaluation, and introduction of underexploited millet crops, including crops of tribal utility which are generally rich in protein is one of the long-term viable solutions for a sustainable supply of food and feed materials. In view of the above, the present review endeavors to highlight the nutritional and functional potential of underexploited millet crops. PRACTICAL APPLICATIONS: Millets are an important food crop at a global level with a significant economic impact on developing countries. Millets have advantageous characteristics as they are drought and pest-resistance grains. Millets are considered as high-energy yielding nourishing foods which help in addressing malnutrition. Millet-based foods are considered as potential prebiotic and probiotics with prospective health benefits. Grains of these millet species are widely consumed as a source of traditional medicines and important food to preserve health., (© 2019 Wiley Periodicals, Inc.)

A novel peroxidase (FMBP) was extracted and purified from foxtail millet bran in our previous study and it possessed excellent anti-colon cancer activity both in vitro and in vivo. However, the active fragment of FMBP responsible for the anti-colon cancer effects remains unclear. In present, three different truncated sequences of FMBP were designed and cloned into a plasmid vector (pMal-s). Three recombinant segments were successfully expressed in host strain Escherichia coli DH5α induced by IPTG (0.3 mM) at 37 °C for 4 h, respectively named MBP-FMBP-1, MBP-FMBP-2 and MBP-FMBP-3. MTT assay showed that only MBP-FMBP-2 possessed significant anti-colon cancer activity, and its anti-colon cancer activity was equivalent to FMBP. Further, the results showed that MBP-FMBP-2 significantly reversed the 5-Fu resistance in human colorectal cancer HCT-8/Fu cell through inhibiting cell proliferation, promoting cell apoptosis and increasing the intracellular accumulation of 5-Fu. RT-PCR and western blot assays showed that MBP-FMBP-2 also decreased the expression levels of multi-drug resistance protein 1 (MRP1), P-glycoprotein (P-gp) and breast cancer resistance protein (BCRP). These results indicate that MBP-FMBP-2 is the effective segment of FMBP which exhibits anti-colon cancer activity and has potential as an outstanding chemotherapeutic agent against colon cancer., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The rich Mediterranean imports found in Early Celtic princely sites (7th-5th cent. BC) in Southwestern Germany, Switzerland and Eastern France have long been the focus of archaeological and public interest. Consumption practices, particularly in the context of feasting, played a major role in Early Celtic life and imported ceramic vessels have consequently been interpreted as an attempt by the elite to imitate Mediterranean wine feasting. Here we present the first scientific study carried out to elucidate the use of Mediterranean imports in Early Celtic Central Europe and their local ceramic counterparts through organic residue analyses of 99 vessels from Vix-Mont Lassois, a key Early Celtic site. In the Mediterranean imports we identified imported plant oils and grape wine, and evidence points towards appropriation of these foreign vessels. Both Greek and local wares served for drinking grape wine and other plant-based fermented beverage(s). A wide variety of animal and plant by-products (e.g. fats, oils, waxes, resin) were also identified. Using an integrative approach, we show the importance of beehive products, millet and bacteriohopanoid beverage(s) in Early Celtic drinking practices. We highlight activities related to biomaterial transformation and show intra-site and status-related differences in consumption practices and/or beverage processing., Competing Interests: The authors have declared that no competing interests exist.

The aim of this study was to provide new approach in creating gluten-containing and gluten-free breads without additives by combining thermal and hydrothermal pretreatments of flours (rye, oat, sorghum and millet). The applied methodology included determinations of chemical composition of flours and breads, water absorption index, empirical and fundamental rheological measurements, and scanning electron microscopy, differential scanning calorimetry, colour, textural and sensory evaluations of breads. Novel rye, oat, sorghum and millet breads based on the blend of heat treated and extruded corresponding flours in ratio 70:30 were produced by conventional breadmaking process. All breads were characterized by increased fibre content and had appearance similar to common wheat bread. Gluten-free breads were harder, less elastic with more granular structure due to higher degree of starch crystallinity. Mixolab curves indicated on many possible ways for further breads optimisation., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

In this experiment, a new type of nutritional drink-millet skim milk beverage-was developed based on combining skim milk with millet and nutritional resource utilization. The effects of NaHCO₃ concentrations in soaking water (0, 0.5 g/100 mL, and 1.0 g/100 mL) and blanching time (0, 15, and 30 min) on the physicochemical properties of millet skim milk were studied. The parameter changes caused by the above treatment were evaluated via color analysis, physicochemical analysis and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Soaking in water containing NaHCO₃ had a significant ( p < 0.05) effect on pH, specific gravity, viscosity, and stability. The blanching treatment had a significant ( p < 0.05) influence on the total solids of the samples. However, blanching only slightly affected the physical properties of the samples. In addition, soaking and blanching treatments had significant ( p < 0.05) effects on the b* value of millet skim milk beverage, whereas there was no significant ( p > 0.05) change in L* and a*. SDS-PAGE analysis indicated that the blanching treatment had a significant ( p < 0.05) effect on band 5 and band 6 and that the soaking treatment also had a significant effect on the bands of 6 and 7 ( p < 0.05). By analyzing the substantial effects, we concluded that the optimum process conditions were soaking with 0.5 g/100 mL NaHCO₃ solution and blanching for 15 min.

Background: Millet porridge is a major complementary food used in Uganda but it is limited in protein and micronutrients such as zinc and beta-carotene. Addition of milk and vegetable powders are known to greatly improve the nutrient content of millet flour. However, there was limited information on the shelf stability of the resultant composite flour. This study aimed at assessing the effect of milk and vegetable powders on the shelf stability of millet-based composite flour., Results: There was a general increase in the moisture content, peroxide value (PV), free fatty acids (FFA), thiobaturic acid (TBA) and total plate count (TPC) of both composite and millet flours over the eight weeks storage period. However, higher moisture content, PV, FFA, TBA and TPC values were recorded in the composite flour compared to millet flour (control) at each sampling interval. Sensory evaluation results revealed that panelists preferred porridges prepared from millet only compared to those from composite flour. The degree of liking of porridges from both composite and millet flours generally decreased over the storage period. However, both porridges were deemed as acceptable by the end of the storage period. The TPC also remained below 10 5 cfu g -1 which is the maximum limit recommended by the Uganda National Bureau of Standards (UNBS)., Conclusion: The study findings indicated that the addition of milk and vegetable powders negatively affected the stability of the composite flour. We recommend further studies to stabilize the product during storage. © 2018 The Authors. Journal of the Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry., (© 2018 The Authors. Journal of the Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.)

True ileal digestibility (TID) values of amino acid (AA) obtained using growing rats are often used for the characterisation of protein quality in different foods and acquisition of digestible indispensable amino acid scores (DIAAS) in adult humans. Here, we conducted an experiment to determine the TID values of AA obtained from nine cooked cereal grains (brown rice, polished rice, buckwheat, oats, proso millet, foxtail millet, tartary buckwheat, adlay and whole wheat) fed to growing Sprague-Dawley male rats. All rats were fed a standard basal diet for 7 d and then received each diet for 7 d. Ileal contents were collected from the terminal 20 cm of ileum. Among the TID values obtained, whole wheat had the highest values (P&lt;0·05), and polished rice, proso millet and tartary buckwheat had relatively low values. The TID indispensable AA concentrations in whole wheat were greater than those of brown rice or polished rice (P&lt;0·05), and polished rice was the lowest total TID concentrations among the other cereal grains. The DIAAS was 68 for buckwheat, 47 for tartary buckwheat, 43 for oats, 42 for brown rice, 37 for polished rice, 20 for whole wheat, 13 for adlay, 10 for foxtail millet and 7 for proso millet. In this study, the TID values of the nine cooked cereal grains commonly consumed in China were used for the creation of a DIAAS database and thus gained public health outcomes.

Proanthocyanidins (PAs) are a class of oligomeric flavonoids found in a variety of plant foods. Intake of PAs in human diet has been associated with a reduced occurrence of various chronic disorders. Cereal and pseudocereal grains are staple food items. Grain genotypes containing PAs can be developed as functional foods to efficiently improve human health. This review summarises the occurrence of PAs in diverse grains, including rice, wheat, barley, sorghum, millets, buckwheat, and some forage grasses. Great diversity in PA structure and composition has been recorded. The biological activities of the grain PAs, such as antioxidant, antiinflammatory, anticancer, and antidiabetic capacities, are also reviewed. The bioavailability and metabolism of grain PAs in human digestive tract are discussed. Future research directions are suggested on how to improve our understandings of the chemistry of PAs in cereals and pseudocereals and of the biological properties for human health applications.

Previous studies have reported a substantial decline in in vitro digestibility of proso millet protein upon cooking. In this study, several processing techniques and cooking solutions were tested with the objective of preventing the loss in pepsin digestibility. Proso millet flour was subjected to the following processing techniques: high pressure processing (200 and 600 MPa for 5 and 20 min); germination (96 h); fermentation (48 h); roasting (dry heating); autoclaving (121 °C, 3 h), and treatment with transglutaminase (160 mg/g protein, 37 °C, 2 h). To study the interaction of millet proteins with solutes, millet flour was heated with sucrose (3-7 M); NaCl (2-6 M); and CaCl 2 (0.5-3 M). All processing treatments failed to prevent the loss in pepsin digestibility except germination and treatment with transglutaminase, which resulted in 23 and 39% increases in digestibility upon cooking, respectively, when compared with unprocessed cooked flours. Heating in concentrated solutions of sucrose and NaCl were effective in preventing the loss in pepsin digestibility, an effect that was attributed to a reduction in water activity (a w ). CaCl 2 was also successful in preventing the loss in digestibility but its action was similar to chaotrops like urea. Thus, a combination of enzymatic modification and cooking of millet flour with either naturally low a w substances or edible sources of chaotropic ions may be useful in processing of proso millet for development of novel foods without loss in digestibility. However, more research is required to determine optimum processing conditions., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Background: Numerous studies indicate mineral deficiencies in people on a gluten-free (GF) diet. These deficiencies may indicate that GF products are a less valuable source of minerals than gluten-containing products. In the study, the nutritional quality of 50 GF products is discussed taking into account the nutritional requirements for minerals expressed as percentage of recommended daily allowance (%RDA) or percentage of adequate intake (%AI) for a model celiac patient. Elements analyzed were calcium, potassium, magnesium, sodium, copper, iron, manganese, and zinc. Analysis of %RDA or %AI was performed using principal component analysis (PCA) and hierarchical cluster analysis (HCA)., Results: Using PCA, the differentiation between products based on rice, corn, potato, GF wheat starch and based on buckwheat, chickpea, millet, oats, amaranth, teff, quinoa, chestnut, and acorn was possible. In the HCA, four clusters were created. The main criterion determining the adherence of the sample to the cluster was the content of all minerals included to HCA (K, Mg, Cu, Fe, Mn); however, only the Mn content differentiated four formed groups., Conclusion: GF products made of buckwheat, chickpea, millet, oats, amaranth, teff, quinoa, chestnut, and acorn are better source of minerals than based on other GF raw materials, what was confirmed by PCA and HCA. © 2017 Society of Chemical Industry., (© 2017 Society of Chemical Industry.)