Search

beta-Rich self-assembly is a major structural class of polypeptides, but still little is known about its atomic structures and biophysical properties. Major impediments for structural and biophysical studies of peptide self-assemblies include their insolubility and heterogeneous composition. We have developed a model system, termed peptide self-assembly mimic (PSAM), based on the single-layer beta-sheet of Borrelia outer surface protein A. PSAM allows for the capture of a defined number of self-assembly-like peptide repeats within a water-soluble protein, making structural and energetic studies possible. In this work, we extend our PSAM approach to a highly hydrophobic peptide sequence. We show that a penta-Ile peptide (Ile(5)), which is insoluble and forms beta-rich self-assemblies in aqueous solution, can be captured within the PSAM scaffold in a form capable of self-assembly. The 1.1-A crystal structure revealed that the Ile(5) stretch forms a highly regular beta-strand within this flat beta-sheet. Self-assembly models built with multiple copies of the crystal structure of the Ile(5) peptide segment showed no steric conflict, indicating that this conformation represents an assembly-competent form. The PSAM retained high conformational stability, suggesting that the flat beta-strand of the Ile(5) stretch primed for self-assembly is a low-energy conformation of the Ile(5) stretch and rationalizing its high propensity for self-assembly. The ability of the PSAM to "solubilize" an otherwise insoluble peptide stretch suggests the potential of the PSAM approach to the characterization of self-assembling peptides.

Models of apolipoprotein A-I (apo A-I), the main protein of high-density lipoprotein, predict that it contains 10 amphiphilic, alpha-helical segments connected by turns. We synthesized four peptides with two identical 18-residue, amphiphilic, alpha-helical segments (Anantharamaiah, G. M., et al. (1985) J. Biol. Chem. 260, 10248-10255) connected by putative turn sequences from apo A-I: (1) Ac-DWLKAFYDKVAEKLKEAFKVEPLRADWLKAFYDKVAEKLKEAF-NH2, (2) Ac-DWLKAFYDKVAEKLKEAFGLLPVLEDWLKAFYDKVAEKLKEAF-NH2, (3) Ac-DWLKAFYDKVAEKLKEAFKVQPYLDDWLKAFYDKVAEKLKEAF-NH2, and (4) Ac-DWLKAFYDKVAEKLKEAFNGGARLADWLKAFYDKVAEKLKEAF-NH2. Surprisingly, peptides 1-3 formed fibrils after incubation (37 degrees C, 10 mM sodium phosphate, pH 7.60), but in contrast to beta-sheet amyloid fibrils, these did not bind thioflavin T and they induced a blue shift in the spectrum of Congo red. CD (peptides 1-3) and FTIR (peptides 1 and 2) of the fibrils showed significant alpha-helical character. Synchrotron X-ray fiber diffraction on a magnetically aligned sample of 1 confirmed the alpha-helical character in the fibrils and indicated that the helical axes are oriented perpendicular to the fibril axis. In contrast, peptide 4, containing two Gly residues but no Pro in the turn, formed only a small amount of nonfibrillar precipitate after prolonged incubation. Peptide 4P (peptide 4 with a Pro in place of the central Ala) and peptide 5, containing a PEG block in lieu of the central turn, were similar to peptide 4 in not forming fibrils, possibly because the region linking the helices was unstructured. These studies indicate that varying turn sequences between longer amphiphilic alpha-helical segments can drive the structure of fibrils.

The pi-helix is a secondary structure with 4.4 amino acids per helical turn. Although it was proposed in 1952, no experimental support for its existence was obtained until the mid-1980s. While short peptides are unlikely to assume a marginally stable secondary structure spontaneously, they might do so in the presence of appropriate structural constraints. In this paper, we describe a peptide that is designed to assume a pi-helical conformation when stabilized by cetyltrimethylammonium bromide (CTAB) micelles and Zn(2+). In the designed peptide, lipophilic amino acids are placed such that it would be amphiphilic in the pi-helical, but not in the alpha-helical, conformation. Also, two His residues are incorporated with i, i + 5 spacing, designed to allow binding of Zn(2+) in a pi-helical but not an alpha-helical conformation. The peptide was found to form moderately stable monolayers at the air-water interface, with a collapse pressure that almost doubled when there was Zn(2+) in the subphase. Also, CTAB micelles induced a marked increase in the helicity of the peptide. In 50% TFE, the peptide had a CD spectrum consistent with an alpha-helical structure. The addition of 1 mM Zn(2+) to this solvent caused a saturable decline in ellipticity to approximately half of its original value. The peptide also bound Zn(2+) when it was bound to CTAB micelles, with Zn(2+) again inducing a decrease in ellipticity. The peptide had slightly greater affinity for Zn(2+) in the presence of the CTAB than in a 50% TFE solution (K(d) = 3.1 x 10(-4) M in CTAB and 2.3 x 10(-4) M in TFE). van't Hoff analysis indicated that thermal denaturation of the peptide in 50% TFE containing 1 mM Zn(2+) was associated with both enthalpic and entropic changes that were greater than those in the absence of Zn(2+). These observations are all consistent with the proposal that the peptide assumed a pi-helical conformation in the presence of Zn(2+) and CTAB micelles, and has allowed the stability of this rare conformation to be assessed.

Beta-amyloid (Abeta) peptides are the main protein component of the pathognomonic plaques found in the brains of patients with Alzheimer's disease. These heterogeneous peptides adopt a highly organized fibril structure both in vivo and in vitro. Here we use solid-state NMR on stable, homogeneous fibrils of Abeta(10-35). Specific interpeptide distance constraints are determined with dipolar recoupling NMR on fibrils prepared from a series of singly labeled peptides containing (13)C-carbonyl-enriched amino acids, and skipping no more that three residues in the sequence. From these studies, we demonstrate that the peptide adopts the structure of an extended parallel beta-sheet in-register at pH 7.4. Analysis of DRAWS data indicates interstrand distances of 5.3 +/- 0.3 A (mean +/- standard deviation) throughout the entire length of the peptide, which is compatible only with a parallel beta-strand in-register. Intrastrand NMR constraints, obtained from peptides containing labels at two adjacent amino acids, confirm the secondary structural findings obtained using DRAWS. Using peptides with (13)C incorporated at the carbonyl position of adjacent amino acids, structural transitions from alpha-helix to beta-sheet were observed at residues 19 and 20, but using similar techniques, no evidence for a turn could be found in the putative turn region comprising residues 25-29. Implications of this extended parallel organization for Abeta(10-35) for overall fibril formation, stability, and morphology based upon specific amino acid contacts are discussed.

We demonstrate a new method for investigating the structure of self-associating biopolymers using dipolar recoupling NMR techniques. This approach was applied to the study of fibrillar beta-amyloid (Abeta) peptides (the primary component of the plaques of Alzheimer's disease) containing only a single isotopic spin label (13C), by employing the DRAWS (dipolar recoupling with a windowless sequence) technique to measure 13C-13C distances. The 'single-label' approach simplified analysis of DRAWS data, since only interstrand contacts are present, without the possibility of any intrastrand contacts. As previously reported [T.L.S. Benzinger, D.M. Gregory, T.S. Burkoth, H. Miller-Auer, D.G. Lynn, R.E. Botto, S.C. Meredith, Proc. Natl. Acad. Sci. 95 (1998) 13407.], contacts of approximately 5 A were observed at all residues studied, consistent with an extended parallel beta-sheet structure with each amino acid in exact register. Here, we propose that our strategy is completely generalizable, and provides a new approach for characterizing any iterative, self-associating biopolymer. Towards the end of generalizing and refining our approach, in this paper we evaluate several issues raised by our previous analyses. First, we consider the effects of double-quantum (DQ) transverse relaxation processes. Next, we discuss the effects of various multiple-spin geometries on modeling of DRAWS data. Several practical issues are also discussed: these include (1) the use of DQ filtering experiments, either to corroborate DRAWS data, or as a rapid screening assessment of the proper placement of isotopic spin labels; and (2) the comparison of solid samples prepared by either lyophilization or freezing. Finally, data obtained from the use of single labels is compared with that obtained in doubly 13C-labeled model compounds of known crystal structure. It is shown that such data are obtainable in far more complex peptide molecules. These data,taken together, refine the DRAWS method, and demonstrate its precision and utility in obtaining high resolution structural data in complex biomolecular aggregates such as Abeta.

The pathognomonic plaques of Alzheimer's disease are composed primarily of the 39- to 43-aa beta-amyloid (Abeta) peptide. Crosslinking of Abeta peptides by tissue transglutaminase (tTg) indicates that Gln15 of one peptide is proximate to Lys16 of another in aggregated Abeta. Here we report how the fibril structure is resolved by mapping interstrand distances in this core region of the Abeta peptide chain with solid-state NMR. Isotopic substitution provides the source points for measuring distances in aggregated Abeta. Peptides containing a single carbonyl 13C label at Gln15, Lys16, Leu17, or Val18 were synthesized and evaluated by NMR dipolar recoupling methods for the measurement of interpeptide distances to a resolution of 0.2 A. Analysis of these data establish that this central core of Abeta consists of a parallel beta-sheet structure in which identical residues on adjacent chains are aligned directly, i. e., in register. Our data, in conjunction with existing structural data, establish that the Abeta fibril is a hydrogen-bonded, parallel beta-sheet defining the long axis of the Abeta fibril propagation.

Bioactive peptides have multiple conformations in solution but adopt well-defined conformations at lipid surfaces and in interactions with receptors. We have used side chain lactam cross-links to stabilize secondary structures in the following peptide models of a conserved N-terminal domain of apolipoprotein E (cross-link periodicity in parentheses): I, H2N-GQTLSEQVQEELLSSQVTQELRAG-COOH (none); III, [sequence; see text] (i to i + 3); IV,[sequence; see text] (i to i + 4); IVa, [sequence, see text] (i to i + 4) (lactams above the sequence, potential salt bridges below the sequence). We previously demonstrated [Luo et al. (1994) Biochemistry 33, 12367-12377; Braddock et al. (1996) Biochemistry 35, 13975-13984] that peptide III, containing lactam cross-links between the i and i + 3 side chains, enhances specific binding of LDL via a receptor other than the LDL-receptor. Peptide III in solution consists of two short alpha helices connected by a non alpha helical segment. Here we examine the hypothesis that the domain modeled by peptide III is one antipode of a conformational switch. To model another antipode of the switch, we introduced two strategic modifications into peptide III to examine structure-function relationships in this domain: (1) the spacing of the lactam cross-links was changed (i to i + 4 in peptides IV and IVa) and (2) peptides IV and IVa contain the two alternative sequences at a site of a possible end-capping interaction in peptide III. The structure of peptide IV, determined by 2D-NMR, is alpha helical across its entire length. Despite the remarkable degree of structural order, peptide IV is biologically inactive. In contrast, peptides III and possibly IVa contain a central interruption of the alpha helix, which appears necessary for biological activity. These and other studies support the hypothesis that this domain is a conformational switch which, to the extent that it models apolipoprotein E itself, may modulate interactions between apo E and its various receptors.