Search

Flat optics have been proposed as an attractive approach for the implementation of new imaging and sensing modalities to replace and augment refractive optics. However, chromatic aberrations impose fundamental limitations on diffractive flat optics. As such, true broadband high-quality imaging has thus far been out of reach for low f-number, large aperture, flat optics. In this work, we overcome these intrinsic fundamental limitations, achieving broadband imaging in the visible wavelength range with a flat meta-optic, co-designed with computational reconstruction. We derive the necessary conditions for a broadband, 1 cm aperture, f/2 flat optic, with a diagonal field of view of 30{\deg} and an average system MTF contrast of 30% or larger for a spatial frequency of 100 lp/mm in the visible band (> 50 % for 70 lp/mm and below). Finally, we use a coaxial, dual-aperture system to train the broadband imaging meta-optic with a learned reconstruction method operating on pair-wise captured imaging data. Fundamentally, our work challenges the entrenched belief of the inability of capturing high-quality, full-color images using a single large aperture meta-optic.

Free-space modulation of light is crucial for many applications, from light detection and ranging to virtual or augmented reality. Traditional means of modulating free-space light involves spatial light modulators based on liquid crystals and microelectromechanical systems, which are bulky, have large pixel areas (~10 micron x 10 micron), and require high driving voltage. Recent progress in meta-optics has shown promise to circumvent some of the limitations. By integrating active materials with sub-wavelength pixels in a meta-optic, the power consumption can be dramatically reduced while achieving a faster speed. However, these reconfiguration methods are volatile and hence require constant application of control signals, leading to phase jitter and crosstalk. Additionally, to control a large number of pixels, it is essential to implement a memory within each pixel to have a tractable number of control signals. Here, we develop a device with nonvolatile, electrically programmable, phase-only modulation of free-space infrared radiation in transmission using the low-loss phase-change material (PCM) Sb2Se3. By coupling an ultra-thin PCM layer to a high quality (Q)-factor (Q~406) diatomic metasurface, we demonstrate a phase-only modulation of ~0.25pi (~0.2pi) in simulation (experiment), ten times larger than a bare PCM layer of the same thickness. The device shows excellent endurance over 1,000 switching cycles. We then advance the device geometry, to enable independent control of 17 meta-molecules, achieving ten deterministic resonance levels with a 2pi phase shift. By independently controlling the phase delay of pixels, we further show tunable far-field beam shaping. Our work paves the way to realizing non-volatile transmissive phase-only spatial light modulators.

Photonic integrated circuits (PICs) have the potential to drastically expand the capabilities of optical communications, sensing, and quantum information science and engineering. However, PICs are commonly fabricated using selective material etching, a subtractive process. Thus, the chip's functionality cannot be substantially altered once fabricated. Here, we propose to exploit wide-bandgap non-volatile phase-change materials (PCMs) to create a rewritable PIC platform. A PCM-based PIC can be written using a nano-second pulsed laser without removing any material, akin to rewritable compact disks. The whole circuit can then be erased by heating, and a completely new circuit can be rewritten. We designed a dielectric-assisted PCM waveguide consisting of a thick dielectric layer on top of a thin layer of wide-bandgap PCMs Sb2S3 and Sb2Se3. The low-loss PCMs and our engineered waveguiding structure lead to a negligible optical loss. Furthermore, we analyzed and specified the spatio-temporal laser pulse shape to write the PCMs. Our proposed platform will enable low-cost manufacturing and have a far-reaching impact on the rapid prototyping of PICs, validation of new designs, and photonic education.

Scalable programmable photonic integrated circuits (PICs) can potentially transform the current state of classical and quantum optical information processing. However, traditional means of programming, including thermo-optic, free carrier dispersion, and Pockels effect result in either large device footprints or high static energy consumptions, significantly limiting their scalability. While chalcogenide-based non-volatile phase-change materials (PCMs) could mitigate these problems thanks to their strong index modulation and zero static power consumption, they often suffer from large absorptive loss, low cyclability, and lack of multilevel operation. Here, we report a wide-bandgap PCM antimony sulfide (Sb2S3)-clad silicon photonic platform simultaneously achieving low loss, high cyclability, and 5-bit operation. We switch Sb2S3 via an on-chip silicon PIN diode heater and demonstrate components with low insertion loss (<1.0 dB), high extinction ratio (>10 dB), and high endurance (>1,600 switching events). Remarkably, we find that Sb2S3 can be programmed into fine intermediate states by applying identical and thermally isolated pulses, providing a unique approach to controllable multilevel operation. Through dynamic pulse control, we achieve on-demand and accurate 5-bit (32 levels) operations, rendering 0.50 +- 0.16 dB contrast per step. Using this multilevel behavior, we further trim random phase error in a balanced Mach-Zehnder interferometer. Our work opens an attractive pathway toward non-volatile large-scale programmable PICs with low-loss and on-demand multi-bit operations., Comment: 22 pages, 6 figures in main text