Search

The development of high-filled 3D printing resin necessitates a bonding protocol for dental indirect restorations to achieve optimal bond strength after cementation. This study evaluates shear bond strengths of high-filler 3D printed materials for permanent restorations with various surface treatments. Rodin Sculpture 1.0 (50% lithium disilicate fillers) and 2.0 Ceramic Nanohybrid (>60% zirconia and lithium disilicate fillers) were tested, with Aelite All-Purpose Body composite resin as control. Samples were prepared, post-cured, and sandblasted with alumina (25 µm). Surface roughness was analyzed using an optical profilometer. Two bonding protocols were compared. First, groups were treated with lithium disilicate silane (Porcelain Primer) or zirconia primer (Z-Prime Plus) or left untreated without a bonding agent. Beam-shaped resin cement (DuoLink Universal) specimens were bonded and stored in a 37 °C water bath. Second, additional sets of materials were coated with a bonding agent (All-Bond Universal), either followed by silane application or left untreated. These sets were then similarly stored alongside resin cement specimens. Shear bond tests were performed after 24 h. SEM images were taken after debonding. One-Way ANOVA and post hoc Duncan were performed for the statistical analysis. Rodin 1.0 exhibited increased adhesive failure with silane or zirconia primer coating, but significantly improved bond strengths with bonding agent application. Rodin 2.0 showed consistent bond strengths regardless of bonding agent application, but cohesive failure rates increased with bonding agent and filler coating. In all groups, except for Rodin 1.0 without bonding agent, silane coating increased cohesive failure rate. In conclusion, optimal shear bond strength for high-filler 3D printing materials can be achieved with silane coating and bonding agent application.

Background: Restoring bonding composite to silver diamine fluoride (SDF)-treated enamel is challenging. This study investigates if phosphoric acid etch restores composite bond strength to SDF-treated enamel using universal adhesives. Methods: Twenty-four recently extracted permanent teeth were randomly divided into 4 (2 experimental (SDF) and 2 control (CTR)) groups: SDF+Water: SDF (1 min) then water rinse (15 mL); CTR+Water: no treatment and water rinse (15 mL); SDF+Etch+Water: SDF (1 min), 35% phosphoric acid (40 s) then water rinse (15 mL); CTR+Etch+Water no treatment, 35% phosphoric acid (40 s) then water rinse (15 mL). The enamel surface in all the groups was bonded (All-Bond Universal) to 4–5 mm composite blocks (Z-250). Each sample was sectioned, and 6–8 beams (1 mm × 1 mm) were selected. The micro-tensile bond strength was measured by dividing the micro-tensile force peak by the adhesive surface area. Univariate ANOVA and Chi-square were used for between-group comparisons with p < 0.05. Results: SDF+Water had significantly lower tensile strength compared to all the groups (p < 0.05). Although no difference was found in the tensile strength between the SDF+Etch+Water and the CTR+Etch+Water, the SDF+Etch+Water had significantly more adhesive failures compared to the CTR+Etch+Water (p = 0.047). Conclusions: While phosphoric acid etch seems to restore the initial composite bond strength to SDF-treated enamel, the long-term success of composite restorations bonded to SDF-treated enamel may need further investigation.

Abstract Aims This study aimed to investigate differences in baseline and treatment characteristics, and in‐hospital mortality according to the aetiologies of cardiogenic shock in patients undergoing veno‐arterial‐extracorporeal membrane oxygenation (VA‐ECMO). Methods and results The RESCUE registry is a multicentre, observational cohort that includes 1247 patients with cardiogenic shock from 12 centres. A total of 496 patients requiring VA‐ECMO were finally selected, and the study population was stratified by cardiogenic shock aetiology [ischaemic cardiomyopathy (ICM, n = 342) and non‐ICM (NICM, n = 154)]. The primary outcome of interest was in‐hospital mortality. Sensitivity analyses including propensity‐score matching adjustments were performed. Mean age of the entire population was 61.8 ± 14.2, and 30.8% were women. There were significant differences in baseline characteristics; notable differences included the older age of patients with ICM (65.1 ± 13.7 vs. 58.2 ± 13.8, P

The development of direct pulp-capping materials with favorable biological and structural properties is an important goal in restorative dentistry. Fucoidan is a sulfated, fucose-containing polysaccharide obtained from brown seaweed, with a wide range of applications; however, its use as a direct pulp-capping material has not been examined. This study aimed to evaluate the mechanical, physical, and biological effects of fucoidan combined with conventional mineral trioxide aggregate (MTA) for direct pulp capping. The capping materials were created using Portland cement (80 wt%) and zirconium oxide (20 wt%) as base components, compared with base components plus 5 wt% fucoidan (PZF5) and base components plus 10 wt% fucoidan (PZF10). The initial and final setting time, compressive strength, chemical components, cell viability, adhesion, migration, osteogenesis, and gene expression were analyzed. Fucoidan significantly reduced the initial and final setting time, regardless of quantity. However, the compressive strength was lower for PZF5. Sulfur levels increased with fucoidan. The biological activity improved, especially in the PZF5 group. Cell migration, Alizarin Red S staining, and alkaline phosphatase activity were upregulated in the PZF5 group. Fucoidan is a useful regenerative additive for conventional pulp-capping materials because it reduces the setting time and improves cell migration and osteogenic ability.

This in vitro study aimed to examine the shear bond strength of composite on the dentin and enamel substrates when mixed with different composite-handling agents (CHAs). Eighty extracted molars were embedded into acrylic resin and sectioned sagittally. On the prepared specimens, four groups of resin mixtures were bonded onto the enamel or dentin surfaces—composite only, composite mixed with Composite Wetting Resin (CWR), composite mixed with Brush and Sculpt (BS), and composite mixed with Modeling Resin (MR). All groups were prepared by mixing at a 1:1 ratio by weight. Each specimen was subjected to the shear bond strength test. After the test, adhesive or cohesive failures were examined at the fractured sites. Data were analyzed using one-way and two-way analysis of variance (ANOVA) and the Tukey post hoc test. All composite groups mixed with CHAs displayed a reduced shear bond strength on dentin and enamel substrates compared to composite alone (p < 0.05). The shear bond strength on dentin decreased in the following order: CWR > BS > MR. A similar pattern was observed on enamel, except that there was no statistically significant difference between BS and MR. Statistically significant interactions between resin mixtures and substrates were found (p < 0.001). On the dentin substrate, adhesive failure dominated while adhesive/cohesive failure dominated on the enamel substrate. Conclusions: The shear bonding strength of composite decreases when mixed with CHAs on both dentin and enamel substrates.

Epoxy resin-based sealers are commonly used for successful endodontic treatment. This study aimed to evaluate the cytotoxicity and genotoxicity of epoxy resin-based sealers under unset and set conditions. Three epoxy resin-based sealers were used: Adseal, AH Plus, and Dia-Proseal. To test cytotoxicity, an agar overlay test and a 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide (MTT) assay were performed using unset and set sealers on L929 mouse fibroblasts. The genotoxicity test of the comet assay was performed using the same cell line. Extract dilutions in the culture media were used as test materials for the MTT and comet assays. The comet tail produced by the damaged DNA was calculated by image analyses. Statistical analyses were performed using one-way analysis of variance and Tukey’s post hoc test. Unset sealers did not show defined decolorized areas. Hardened specimens of resin-based sealers showed circular discolored zones in the agar overlay test. Dia-Proseal was the least cytotoxic after hardening. These results were confirmed in the MTT assay. Cell viability was significantly higher in cells treated with hardened sealers in both groups than that in cells treated with freshly mixed sealers in the MTT assay. Unset AH Plus® and Dia-Proseal™ significantly increased cell viability with decreasing dilution. Adseal™ was the least cytotoxic. Freshly mixed Adseal™ was more genotoxic when freshly mixed than when set. Unset epoxy resin-based sealers were generally more cytotoxic and genotoxic than set materials. Cytotoxicity does not always match the genotoxicity results; therefore, various test tools are required to test toxicity. It is necessary to properly evaluate the toxic effects to establish a biocompatibility test that mimics clinical conditions.

The tensile bond strength between zirconia subjected to different surface-pretreatment methods and methacryloyloxydecyl-dihydrogen-phosphate (MDP)-containing self-adhesive resin cement was evaluated herein. Eighty-eight cylindrical zirconia specimens were randomly divided into the following four groups based on the pretreatment method: (1) no treatment, (2) air abrasion, (3) HNO3/HF etching, and (4) zirconia-nanoparticle coating. The tensile bond strength of the zirconia–resin-cement complexes was investigated. One-way ANOVA and post hoc tests were performed at a 95% significance level, and the Weibull modulus was calculated. Fracture patterns were visualized by SEM. The surface roughness of the specimens without resin bonding was evaluated by AFM. The tensile bond strength of the specimens decreased as follows: Groups 3 > 4 > 2 > 1 (28.2 ± 6.6, 26.1 ± 5.7, 16.6 ± 3.3, and 13.9 ± 3.0 MPa, respectively). Groups 3 and 4 had significantly higher tensile bond strengths (p < 0.05) and lower fracture probabilities than those of Groups 1 and 2. They also showed both mixed failure and resin-cement cohesive failure, whereas Groups 1 and 2 showed mixed failure exclusively. The zirconia–resin tensile bond was stronger after HNO3/HF etching or ZrO2-nanoparticle coating than after air abrasion or no treatment. The estimated surface roughness decreased as follows: Groups 3 > 4 > 2 > 1. The combination of zirconia pretreated with HNO3/HF etching or ZrO2-nanoparticle coating and an MDP-containing self-adhesive resin cement can increase the clinical longevity of zirconia restorations by preventing their decementation.

Background: Although brachial-ankle pulse wave velocity (baPWV) is well-known for predicting the cardiovascular mortality and morbidity, its anticipated value is not demonstrated well concerning acute stroke. Methods: Total 1557 patients with acute stroke who performed baPWV were enrolled. We evaluated the prognostic value of baPWV predicting all-cause death and vascular death in patients with acute stroke Results: Highest quartile of baPWV was ≥23.64 m/s. All-caused deaths (including vascular death; 71) were 109 patients during follow-up periods (median 905 days). Multivariate Cox regression analysis revealed that patients with the highest quartile of baPWV had higher risk for vascular death when they are compared with patients with all other three quartiles of baPWV (Hazard ratio with 95% confidence interval [CI] 1.879 [1.022–3.456], p = .042 for vascular death). Conclusion: High baPWV was a strong prognostic value of vascular death in patients with acute stroke

The purpose of this qualitative study rooted in the theory of planned behaviour (TpB) was to investigate South Korean physical education (PE) teachers' and female secondary school students' beliefs about girls' physical activity (PA) participation. Particular focus was given to the curricular and pedagogical factors influencing their engagement. Participants of this study were six PE teachers and 12 female students (two from each teacher's PE programme, one identified as having low PA and the other high PA) in two public middle schools and four public high schools in South Korea. Data were collected through demographic questionnaires, a series of semi-structured interviews with each PE teacher and one with each female secondary school student, and non-participant observations (e.g. fieldnotes) of three lessons of each PE teacher. The data were analyzed through thematic analysis using TpB to guide the coding (e.g. attitude toward the behaviour, subjective norms, and perceived behavioural control). Findings indicated that the teachers assumed mixed-gender and traditional curriculum were core barriers, whereas the female students had more diverse and conflicting perspectives, but overall, expressed desire for more choice within the curriculum. Teacher and student beliefs are compared, and pertinent pedagogical implications are provided in light of their differences.

Physical educators may be hesitant to adopt cooperative learning in their classes because they are concerned that a focus on socioemotional learning may reduce motor skill development. However, cooperative learning can increase physical activity engagement and interpersonal skills. This article demonstrates what cooperative learning can look like in physical education through two activities that highlight the five key elements of cooperative learning.

This study evaluated the physical and mechanical properties of resin matrices in dental adhesives with two photoinitiator systems. Resin matrix specimens were made with five different kinds of photoinitiators. Neat resin consisted of 60% 2,2-bis[4-2(2-hydroxy-3-methacryloxypropoxy)phenyl]propane (Bis-GMA) and 40% hydroxyethyl methacrylate (HEMA) by weight, along with camphorquinone (CQ, 1 mol %) and additional components (1 mol % each) as follows: Group 1, 2-(dimethylamino)ethyl methacrylate (DMAEMA); Group 2, ethyl-4-(dimethylamino) benzoate (EDMAB); Group 3, diphenyliodonium hexafluorphosphate (DPIHFP); Group 4, DMAEMA+DPIHFP; Group 5, EDMAB+DPIHFP. The degree of conversion (DC), flexural strength, flexural modulus, microhardness, and ultimate tensile strength were tested. The contribution of each photoinitiator to the DC in a selected group was analyzed with contour plots. One-way ANOVA and Tukey tests (p < 0.05) were used for statistical analyses. The DC of Groups 2, 4, and 5 was similar. The flexural strength was similar in all groups, but flexural modulus was significantly different. Group 3 had the lowest values for all physical and mechanical properties. Among all methods, the microhardness test revealed the greatest degree of difference among the five specimens. CQ, EDMAB, and DPIHFP were the most effective photoinitiators and CQ was the most influential factor for the DC rate.

Confronting the distinctive challenges of international East Asian students is vital for the increasingly diverse United States higher education system. This study examines the experiences of six participants of East Asian descent during kinesiology doctoral programs at U.S. higher education institutions. The research design is qualitative inquiry rooted in Asian Critical Race Theory (AsianCrit). There were several subthemes emerged; (a) language barriers and/or proficiency, (b) cross-cultural dissonance, (c) multi-faceted challenges, (d) limited social relationships, and (e) extension of Asian identity as faculty. Findings are discussed in light of AsianCrit with a particular focus on marginalization--invisible presence and silenced voices, intersectionality--perpetual foreigners and unwelcome outsiders, lack of social and cultural capital, and counter stories. Frequently positioned as outsiders with minimal voice and visibility, their learning and success can be supported by increased institutional diversity training, culturally responsive asset -based instruction, and culturally contextual orientation.

Background: Acute swelling or cellulitis may develop within a few days after placing a definitive prosthesis or reconnecting a loose healing abutment/prosthesis, though its cause remains unclear. In this study, we propose a mechanism for the underlying pathogenesis. Methods: We retrospectively reviewed the symptoms and signs, onset of symptoms, recovery duration, and laboratory data of seven women and two men (55–84 years) who exhibited acute swelling and pain around dental implants within a month of connecting definitive prosthesis or reconnecting a loose healing abutment/prosthesis between 2013 and 2021. Results: The extent of the swelling varied from the gingiva and vestibule around the implant to the face and neck regions. The swelling persisted despite removal of the connected superstructure. All patients recovered within three weeks of symptom onset. Conclusions: Our findings suggest that the rapid onset of symptoms and signs, progress, duration, and etiology were consistent with the pathogenesis of deep tissue injury, which is characterized by acute inflammatory swelling that initiates from the interface between bone and subcutaneous tissue and progresses outward. Clinicians should be aware of the pathogenesis of pressure-induced injury and provide adequate treatment based on the underlying physiological process.

Purpose: To assess the effect of extraoral polishing of the crown-abutment interface on the marginal fit of implant-supported screw- and cement-retained prostheses (SCRPs).Materials and Methods: In 31 patients, the marginal gap of an SCRP was measured using a stereomicroscope before and after polishing of the crown-abutment interface, and the paired data were compared.Results: The marginal gap was significantly decreased after surface polishing regardless of the prosthesis material (P < .001).Conclusion: Extraoral polishing of the crown-abutment interface could improve the marginal fit of SCRPs. [ABSTRACT FROM AUTHOR]

We evaluated whether thrombus aspiration (TA) during primary percutaneous coronary intervention (PCI) reduces adverse clinical outcomes within 30-days and 1-year periods. There is no well-designed, Korean data about the clinical impact of intracoronary TA during primary PCI in patients with ST-segment elevation myocardial infarction (STEMI). From the Korea Acute Myocardial Infarction Registry-National Institute of Health, 3749 patients with STEMI undergoing primary PCI within 12 hours (60.8±12.9 years, 18.7% women) with pre-procedural Thrombolysis in Myocardial Infarction (TIMI) flow 0, 1 in coronary angiography were enrolled between November 2011 and December 2015. The patients were divided into two groups: PCI with TA (n=1630) and PCI alone (n=2119). The primary end-point was major adverse cardiac event (MACE), defined as the composite of cardiovascular death (CVD), recurrent MI and stroke for 30-days and 1-year. TA did not diminish the risk of MACE, all-cause mortality and CVD in all patients during 30-days or 1-year. After performing the propensity score matching, TA also did not reduce the risk of MACE (Hazard ratio (HR) with 95% Confidence Interval (CI):1.187 [0.863-1.633], p value=0.291), all-cause mortality (HR with 95% CI: 1.130 [0.776-1.647], p value=0.523) and CVD (HR with 95% CI: 1.222 [0.778-1.920], p value=0.384) during the 1-year period. In subgroup analysis, there was no benefit of clinical outcomes favoring PCI with TA. In conclusion, primary PCI with TA did not reduce MACE, all-cause mortality or CVD among the Korean patients with STEMI and pre-procedural TIMI flow 0, 1 during the 30-day and 1-year follow ups. [ABSTRACT FROM AUTHOR]