Search

A complex aggregate of about 24 species, A. millefolium L. agg. (Asteraceae) is one of the medicinal plants with a long tradition of use, dating back from ancient times. This paper attempts to answer to three main questions: What are the A. millefolium products available in pharmacy (on the Romanian market) that a patient might be interested in? What are their potential uses (based on clinical evidence and officially recognized traditional use in the European Union) and the relevant posology? What knowledge do we have about the safety of those products?

The woodworking applications are a fast-growing field that aims to create advanced coatings with superior wear resistance, reduced friction, and robust corrosion protection. Chromium silicon carbonitride (CrSiCN) coatings have emerged as a promising solution that offers a unique combination of properties ideal for various industrial applications. The C/N ratio significantly influences the coatings' mechanical and tribological properties. By optimizing the C/N ratio, this research aims to reveal new insights for CrSiCN coatings, enhancing their application in environments that require durability, efficiency, and longevity. In this paper, the effect of the C/N ratio on the structural, mechanical, and corrosion resistance of CrSiCN coatings deposited by cathodic arc evaporation on different steel substrates was studied. The main purpose was to enhance the mechanical and anticorrosion properties of the CrSiCN coatings and to select the optimum parameters for the deposition of layers with superior properties. The results showed that the final properties can be tailored by choosing specific deposition conditions. In this case, the C/N ratio proved to be critical since coatings with higher carbon content presented enhanced corrosion resistance, being able to withstand operating conditions similar to real-life.

The current study’s aim is to obtain quaternary ZrCuCa based thin films using a physical vapor deposition method (PVD) - cathodic arc approach – in order to improve the surface properties of 316L stainless steel and Ti6Al4V implantable materials. The developed ZrCuCa-based layers could be potential candidates in the medical industry if they are able to combine their exceptional mechanical properties with the corrosion resistance of amorphous metallic glasses. Furthermore, addition of Mo, Mg, Si, and Sr was taken into consideration for the ZrCuCa structure and the resulted quaternary systems were analysed in detail, through electrochemical tests and bioactivity assay, which were carried out in synthetic body fluid (SBF) at human body temperature (37 °C). Surface morphology and roughness of the specimens before and after the tests were also evaluated. The results showed that regardless the substrate type, the roughness of the surface has increased for all coatings from 19 nm for 316L, and 50 nm for Ti6Al4V, to 2000 nm). The adhesion of obtained coatings was reached from 8 N to 18, the coatings on Ti6Al4V alloy was found to be from 12 N to 18 N, while on 316L steel was from 8 N to 15 N, indicating that the coatings deposited on Ti alloy have a better adhesion. The corrosion current density parameter for ZrCuCaMo and ZrCuCaMg sjowe the lowest value (316L: 21.99 µA/cm2 and 11.37 µA/cm2; Ti6Al4V: 1.62 µA/cm2 and 13.37 µA/cm2), indicating the best corrosion resistance. The mass evolution of the coatings deposited on 316L was ranged from the −0.47 mg to 1.37 mg, while for those deposited on Ti6Al4V, the values were ranged from −0.08 mg to 2.66 mg, indicating a degradation and biomineralization process, respectively. In conclusion, the electrochemical studies and bioactivity experiments demonstrated that the suggested coatings improve the substrate’s behaviour in simulated conditions, highlighting their potential as biomaterials.

Metastatic colorectal cancer requires a multidisciplinary and individualized approach. Herein, we reported the case of a young woman diagnosed with metastatic rectal cancer who received an individualized multimodal treatment strategy that resulted in a remarkable survival. There were several particular aspects of this case, such as the early onset of the disease, the successful use of conversion therapy, the application of liquid biopsy to guide treatment, and the specific nature of the bone metastasis. To offer more insights for navigating such challenges in patients with metastatic colorectal cancer, we have conducted a literature review to find more data related to the particularities of this case. The incidence of early onset colorectal cancer is on the rise. Data suggests that it differs from older-onset colorectal cancer in terms of its pathological, epidemiological, anatomical, metabolic, and biological characteristics. Conversion therapy and surgical intervention provide an opportunity for cure and improve outcomes in metastatic colorectal cancer. It is important to approach each case individually, as every patient with limited liver disease should be considered as a candidate for secondary resection. Moreover, liquid biopsy has an important role in the individualized management of metastatic colorectal cancer patients, as it offers additional information for treatment decisions.

Biomaterials are an important and integrated part of modern medicine, and their development and improvement are essential. The fundamental requirement of a biomaterial is found to be in its interaction with the surrounding environment, with which it must coexist. The aim of this study was to assess the biological characteristics of hydroxyapatite (HAp)-based coatings doped with Mg and Zn ions obtained by the pulsed galvanostatic electrochemical method on the surface of pure titanium (cp-Ti) functionalized with titanium dioxide nanotubes (NTs TiO2) obtained by anodic oxidation. The obtained results highlighted that the addition of Zn or Mg into the HAp structure enhances the in vitro response of the cp-Ti surface functionalized with NT TiO2. The contact angle and surface free energy showed that all the developed surfaces have a hydrophilic character in comparison with the cp-Ti surface. The HAp-based coatings doped with Zn registered superior values than the ones with Mg, in terms of biomineralization, electrochemical behavior, and cell interaction. Overall, it can be said that the addition of Mg or Zn can enhance the in vitro behavior of the HAp-based coatings in accordance with clinical requirements. Antibacterial tests showed that the proposed HAp-Mg coatings had no efficiency against Escherichia coli, while the HAp-Zn coatings registered the highest antibacterial efficiency.

It has been documented that patients with mental or physical disabilities can benefit from being placed within the setting of a natural environment. Consequently, the concept of creating spaces that can enhance health preservation or patient recovery, while also augmenting environmental and aesthetic value, has merged as a contemporary discourse. Green areas around hospitals can offer a great opportunity to incorporate healing gardens to benefit their patients and not only. The aim of this paper is to propose a design for a sensory-therapeutic garden based on key principles derived from selected academic literature, focusing on the application of these principles in a healthcare setting in Cluj-Napoca, Romania. The design was informed also by onsite data collection and analysis, and it aims to create a healing landscape that addresses the needs of patients, healthcare providers, and visitors. This study seeks to augment the discourse in the field by demonstrating the practical application of key therapeutic garden design principles in a specific context and how these principles impacted the design process.

With a widespread distribution throughout the Northern Hemisphere and 11 genera, Pinaceae is the largest family of Gymnosperms in the world. Essential oils are an important chemotaxonomic marker for the species of this family, although the degree of chemical and biological investigation has not been the same for all genera. Essential oils from Abies and Cedrus (from the abietoid clade) or Pinus and Picea (from the pinoid clade) have been more extensively investigated with respect to their chemical composition and biological or pharmacological properties, including their antioxidant effects. Instead, essential oils from the other genera of the family have been less explored in this respect or even have not been investigated at all. This is a narrative review looking into the knowledge acquired up to date, the variability and limitations of the current methods used to estimate antioxidant effects, and multiple comparisons between EOs obtained from different genera, species, and plant parts, as well as potential applications and future directions of research and utilization of essential oils derived from Pinaceae species.

Multi-component high-entropy (TiCrAl0.5NbCu)CxNy coatings targeting applications requiring medium-to-high friction and wear-resistant surfaces were fabricated through the co-sputtering of elemental targets in an Ar + CH4 + N2 reactive atmosphere using a hybrid HiPIMS/DCMS technique. Two sets of samples were fabricated: (a) (TiCrAl0.5NbCu)Cx high-entropy carbides (HEC) and (b) (TiCrAl0.5NbCu)CxN0.13 high-entropy carbonitrides (HECN), 0 ≤ x ≤ 0.48. The structural, mechanical, tribological, and corrosion resistance properties were thoroughly investigated. The metallic sample exhibits a single BCC structure that changes to FCC via an intermediary amorphous phase through the addition of C or N to the content of the films. The crystallinity of the FCC phases is enhanced and the density of the films decreases down to 5.5 g/cm3 through increasing the carbon fraction up to 48%. The highest hardness of about 16.9 GPa and the lowest wear rate of about 5.5 × 10−6 mm3/Nm are presented by the samples with the largest carbon content, x = 0.48. We found a very good agreement between the evolution of H/E and H3/E2 parameters with carbon content and the tribological behavior of the coatings. The best corrosion resistance was presented by the low-carbon carbonitride samples, showing a charge transfer resistivity of about 3 × 108 Ω∙cm, which is more than three times larger than that of the metallic HEA. The best tribological characteristics for envisioned application were presented by (TiCrAl0.5NbCu)C0.3N0.13, showing a coefficient of friction of 0.43 and a wear rate of about 7.7 × 10−6 mm3/Nm.

The use of MAPLE synthesized thin films based on BG and VD3 for improving the osseointegration and corrosion protection of Ti-like implant surfaces is reported. The distribution of chemical elements and functional groups was shown by FTIR spectrometry; the stoichiometry and chemical functional integrity of thin films after MAPLE deposition was preserved, optimal results being revealed especially for the BG+VD3_025 samples. The morphology and topography were examined by SEM and AFM, and revealed surfaces with many irregularities, favoring a good adhesion of cells. The thin films’ cytotoxicity and biocompatibility were evaluated in vitro at the morphological, biochemical, and molecular level. Following incubation with HDF cells, BG57+VD3_ 025 thin films showed the best degree of biocompatibility, as illustrated by the viability assay values. According to the LDH investigation, all tested samples had higher values compared to the unstimulated cells. The evaluation of cell morphology was performed by fluorescence microscopy following cultivation of HDF cells on the obtained thin films. The cultivation of HDF’s on the thin films did not induce major cellular changes. Cells cultured on the BG57+VD3_025 sample had similar morphology to that of unstimulated control cells. The inflammatory profile of human cells cultured on thin films obtained by MAPLE was analyzed by the ELISA technique. It was observed that the thin films did not change the pro- and anti-inflammatory profile of the HDF cells, the IL-6 and IL-10 levels being similar to those of the control sample. The wettability of the MAPLE thin films was investigated by the sessile drop method. A contact angle of 54.65° was measured for the sample coated with BG57+VD3_025. Electrochemical impedance spectroscopy gave a valuable insight into the electrochemical reactions occurring on the surface.

Background: Due to its many benefits, indocyanine green (ICG) has gained progressive popularity in operating rooms (ORs) globally. This literature review examines its qualitative and quantitative usage in surgical treatment. Method: Relevant terms were searched in five international databases (1. Pubmed, 2. Sciencedirect, 3. Scopus, 4. Oxfordjournals, 5. Reaxys) for a comprehensive literature review. The main benefits of using ICG in colorectal surgery are: intraoperative fluorescence angiography; fluorescence-guided lymph node involvement detection and the sentinel technique; the fluorescent emphasis of a minute liver tumour, counting just 200 tumour cells; facilitation of fistula diagnosis; and tumour tattooing. This methodology can also be used with quantitative characteristics such as maximum intensity, relative maximum intensity, and in-flow parameters such as time-to-peak, slope, and t1/2max. This article concludes that fluorescence surgery with ICG and near-infrared (NIR) light is a relatively new technology that improves anatomical and functional information, allowing more comprehensive and safer tumour removal and the preservation of important structures.

Abies alba Mill. (Pinaceae), silver fir, is a widespread gymnosperm species in Europe, important for its ecological, economic, social, and cultural significance, as well as for its use for food and bioremediation purposes. The various parts of the plant (leaves, branches, cones, wood, bark) are also of pharmaceutical interest due to their composition of active compounds. In the last three decades, an impressive amount of research has been dedicated to this species. The variability of the chemical composition of essential oils (whether they come from leaves, oleoresin from branches, or other parts of the plant) is impressive, even in the case of specimens collected from the same geographical area. For essential oils prepared from needles or twigs and branches, limonene, β-pinene, α-pinene, camphene, β-phellandrene, and bornyl acetate are the leading compounds, although their wide variations seem to correspond to multiple chemotypes. Both bark and wood are rich in lignans and phenolic compounds. Matairesinol is apparently the dominant lignan in bark, and secoisolariciresinol and lariciresinol are the dominant ones in wood samples. Pharmacological studies with promising results have evaluated the antioxidant effect (mainly due to essential oils), but also the antimicrobial, antitumor, probiotic, antidiabetic, anti-steatosis, and anti-psoriatic activities.

The aim of the present paper was to evaluate the effect of neutron activation on TiSiCN carbonitrides coatings prepared at different C/N ratios (0.4 for under stoichiometric and 1.6 for over stoichiometric). The coatings were prepared by cathodic arc deposition using one cathode constructed of Ti88 at.%-Si12 at.% (99.99% purity). The coatings were comparatively examined for elemental and phase composition, morphology, and anticorrosive properties in 3.5% NaCl solution. All the coatings exhibited f.c.c. solid solution structures and had a (111) preferred orientation. Under stoichiometric structure, they proved to be resistant to corrosive attack in 3.5% NaCl and of these coatings the TiSiCN was found to have the best corrosion resistance. From all tested coatings, TiSiCN have proven to be the most suitable candidates for operation under severe conditions that are present in nuclear applications (high temperature, corrosion, etc.).

The goal of this stydy was to explore the potential of the enhanced corrosion resistance of Ti(N,O) cathodic arc evaporation-coated 304L stainless steel using oxide nano-layers deposited by atomic layer deposition (ALD). In this study, we deposited Al2O3, ZrO2, and HfO2 nanolayers of two different thicknesses by ALD onto Ti(N,O)-coated 304L stainless steel surfaces. XRD, EDS, SEM, surface profilometry, and voltammetry investigations of the anticorrosion properties of the coated samples are reported. The amorphous oxide nanolayers homogeneously deposited on the sample surfaces exhibited lower roughness after corrosion attack compared to the Ti(N,O)-coated stainless steel. The best corrosion resistance was obtained for the thickest oxide layers. All samples coated with thicker oxide nanolayers augmented the corrosion resistance of the Ti(N,O)-coated stainless steel in a saline, acidic, and oxidising environment (0.9% NaCl + 6% H2O2, pH = 4), which is of interest for building corrosion-resistant housings for advanced oxidation systems such as cavitation and plasma-related electrochemical dielectric barrier discharge for breaking down persistent organic pollutants in water.

Background and Objectives: Colorectal cancer (CRC) is a leading cause of cancer-related mortality and morbidity worldwide. Bevacizumab was approved for the treatment of metastatic colorectal cancer (mCRC) based on favorable benefit-risk assessments from randomized controlled trials, but evidence on its use in the real-world setting is limited. The aim of the current study is to evaluate the outcomes and safety profile of bevacizumab in mCRC in a real-world setting in Romania. Patients and Methods: This was an observational, retrospective, multicentric, cohort study conducted in Romania that included patients with mCRC treated with bevacizumab as part of routine clinical practice. Study endpoints were progression-free survival, overall survival, adverse events, and patterns of bevacizumab use. Results: A total of 554 patients were included in the study between January 2008 and December 2018. A total of 392 patients (71%) received bevacizumab in the first line and 162 patients (29%) in the second line. Bevacizumab was mostly combined with a capecitabine/oxaliplatin chemotherapy regimen (31.6%). The median PFS for patients treated with bevacizumab was 8.4 months (interquartile range [IQR], 4.7–15.1 months) in the first line and 6.6 months (IQR, 3.8–12.3 months) in the second line. The median OS was 17.7 months (IQR, 9.3–30.6 months) in the first line and 13.5 months (IQR, 6.7–25.2 months) in the second line. Primary tumor resection was associated with a longer PFS and OS. The safety profile of bevacizumab combined with chemotherapy was similar to other observational studies in mCRC. Conclusions: The safety profile of bevacizumab was generally as expected. Although the PFS was generally similar to that reported in other studies, the OS was shorter, probably due to the less frequent use of bevacizumab after disease progression and the baseline patient characteristics. Patients with mCRC treated with bevacizumab who underwent resection of the primary tumor had a higher OS compared to patients with an unresected primary tumor.

Aspergillus species, especially A. fumigatus, and to a lesser extent others (A. flavus, A. niger, A. terreus), although rarely pathogenic to healthy humans, can be very aggressive to immunocompromised patients (they are opportunistic pathogens). Although survival rates for such infections have improved in recent decades following the introduction of azole derivatives, they remain a clinical challenge. The fact that current antifungals act as fungistatic rather than fungicide, that they have limited safety, and that resistance is becoming increasingly common make the need for new, more effective, and safer therapies to become more acute. Over the last decades, knowledge about the molecular biology of A. fumigatus and other Aspergillus species, and particularly of calcineurin, Hsp90, and their signaling pathway proteins, has progressed remarkably. Although calcineurin has attracted much interest, its adverse effects, particularly its immunosuppressive effects, make it less attractive than it might at first appear. The situation is not very different for Hsp90. Other proteins from their signaling pathways, such as protein kinases phosphorylating the four SPRR serine residues, CrzA, rcnA, pmcA-pmcC (particularly pmcC), rfeF, BAR adapter protein(s), the phkB histidine kinase, sskB MAP kinase kinase, zfpA, htfA, ctfA, SwoH (nucleoside diphosphate kinase), CchA, MidA, FKBP12, the K27 lysine position from Hsp90, PkcA, MpkA, RlmA, brlA, abaA, wetA, other heat shock proteins (Hsp70, Hsp40, Hsp12) currently appear promising and deserve further investigation as potential targets for antifungal drug development.

Within the next few years climate change is likely to become a major concern for mankind. In addition, the current electronic components shortage crisis has led to an urgent need for alternative solutions in the main industry sectors (the raw materials, manufacturing, and construction industries). The current trends of research are focused on developing smart materials with functional properties, using abundant raw materials. The energy saving efforts are sustained in the glazing industries by several approaches based on dielectric-metal-dielectric multilayer structures. The use of silver to achieve a high reflectivity in near-infrared spectral range has been proposed and is already adopted as a commercially available solution. This work is focused on developing a transparent heat reflector (THR) with prefigured optical properties, using copper as a reflective layer, a material that is more abundant and cheaper than silver. The conductive copper layers obtained by the High Power Impulse Magnetron Sputtering (HiPIMS) method were interposed between two silicon nitride layers deposited by the Radio-Frequency Magnetron Sputtering (RFMS) technique. The structural, optical, and elemental composition of monolayers was investigated, qualifying each individual material for use in the multilayer structure. The time stability of films deposited on microscope glass substrates was also investigated, as an important criterion for the selection of monolayers. The obtained results revealed that the SiNx/Cu/SiNx with the Cu layer deposited by using a negative substrate bias of −100 V showed the most stable behavior over time. Optical modeling was performed to design a THR multilayer structure, which was successfully obtained experimentally. A maximum optical transparency as high as 75% in the visible range and a reflectivity of ~ 85% in near infrared spectral interval was confirmed for the experimentally obtained multilayer structures.

The current study describes the synthesis, physicochemical characterization and cytotoxicity evaluation of a new series of pyrrole derivatives in order to identify new bioactive molecules. The new pyrroles were obtained by reaction of benzimidazolium bromide derivatives with asymmetrical acetylenes in 1,2-epoxybutane under reflux through the Huisgen [3 + 2] cycloaddition of several ylide intermediates to the corresponding dipolarophiles. The intermediates salts were obtained from corresponding benzimidazole with bromoacetonitrile. The structures of the newly synthesized compounds were confirmed by elemental analysis, spectral techniques (i.e., IR, 1H-NMR and 13C-NMR) and single-crystal X-ray analysis. The cytotoxicity of the synthesized compounds was evaluated on plant cells (i.e., Triticum aestivum L.) and animal cells using aquatic crustaceans (i.e., Artemia franciscana Kellogg and Daphnia magna Straus). The potential antitumor activity of several of the pyrrole derivatives was studied by performing in vitro cytotoxicity assays on human adenocarcinoma-derived cell lines (i.e., LoVo (colon), MCF-7 (breast), and SK-OV-3 (ovary)) and normal human umbilical vein endothelial cells (HUVECs). The obtained results of the cytotoxicity assessment indicated that the tested compounds had nontoxic activity on Triticum aestivum L., while on Artemia franciscana Kellogg nauplii, only compounds 2c and 4c had moderate toxicity. On Daphnia magna, 4b and 4c showed high toxicity; 2a, 2b, and 2c moderate to high toxicity; only 4a and 4d were nontoxic. The compound-mediated cytotoxicity assays showed that several pyrrole compounds demonstrated dose- and time-dependent cytotoxic activity against all tested tumor cell lines, the highest antitumor properties being achieved by 4a and its homologue 4d, especially against LoVo colon cells.

Background and objectives. In colorectal cancers, the embryologic origin of the primary tumor determines important molecular dissimilarities between right-sided (RS) and left-sided (LS) carcinomas. Although important prognostic differences have been revealed between RS- and LS-patients with resected colorectal liver metastases (CLMs), it is still unclear if this observation depends on the RAS mutational status. To refine the impact of primary tumor location (PTL) on the long-term outcomes of patients with resected CLMs, the rates of overall survival (OS), relapse-free survival (RFS) and survival after recurrence (SAR) were compared between RS- vs. LS-patients, according to their RAS status. Material and Methods. All patients with known RAS status, operated until December 2019, were selected from a prospectively maintained database, including all patients who underwent hepatectomy for histologically-proven CLMs. A log-rank test was used to compare survival rates between the RS- vs. LS-group, in RAS-mut and RAS-wt patients, respectively. A multivariate analysis was performed to assess if PTL was independently associated with OS, RFS or SAR. Results. In 53 patients with RAS-mut CLMs, the OS, RFS and SAR rates were not significantly different (p = 0.753, 0.945 and 0.973, respectively) between the RS and LS group. In 89 patients with RAS-wt CLMs, the OS and SAR rates were significantly higher (p = 0.007 and 0.001, respectively) in the LS group vs. RS group, while RFS rates were similar (p = 0.438). The multivariate analysis performed in RAS-wt patients revealed that RS primary (p = 0.009), extrahepatic metastases (p = 0.001), N-positive (p = 0.014), age higher than 65 (p = 0.002) and preoperative chemotherapy (p = 0.004) were independently associated with worse OS, while RS location (p < 0.001) and N-positive (p = 0.007) were independent prognostic factors for poor SAR. Conclusions. After resection of CLMs, PTL had no impact on long-term outcomes in RAS-mut patients, while in RAS-wt patients, the RS primary was independently associated with worse OS and SAR.

The demand for transparent conductive coatings has increased over recent years, leading to the development of various technical solutions. One of the approaches is to use metallic coatings very close to their coalescence thickness, so that a good compromise between transparency and conductivity is obtained. In this contribution, a combination of two elements with high potential in this field is used, namely silver and copper. The continuity of silver films on a dielectric transparent substrate is significantly improved by the addition of a copper seed layer that promotes the formation of a continuous layer at smaller effective thicknesses. Two distinct deposition processes are used for the deposition of the two materials, namely HiPIMS (High Power Impulse magnetron sputtering) for copper and DC sputtering for silver. The use of HiPIMS enables a better control of the structure and quantity of deposited material, allowing us to deposit a very small amount of material. The mono-element coatings are characterized from the optical and electrical point of view, and then mixed to form a structure with better transparency, up to 80% in the visible spectrum, good electrical properties, resistivity of ~2 × 10−5 (Ω × cm), and significantly lower surface roughness, down to 0.2 nm.

Coatings are an attractive and challenging selection for improving the bioperformance of metallic devices. Composite materials based on bioglass/antibiotic/polymer are herein proposed as multifunctional thin films for hard tissue implants. We deposited a thin layer of the polymeric material by matrix-assisted pulsed laser evaporation—MAPLE onto Ti substrates. A second layer consisting of bioglass + antibiotic was applied by MAPLE onto the initial thin film. The antimicrobial activity of MAPLE-deposited thin films was evaluated on Staphylococcus aureus, Enterococcus faecalis, Escherichia coli, and Pseudomonas aeruginosa standard strains. The biocompatibility of obtained thin films was assessed on mouse osteoblast-like cells. The results of our study revealed that the laser-deposited coatings are biocompatible and resistant to microbial colonization and biofilm formation. Accordingly, they can be considered viable candidates for biomedical devices and contact surfaces that would otherwise be amenable to contact transmission.

The use of thin metallic layers at the thickness limit where transparency or spectral selectivity are achieved is gaining increased interest. The use of cheap and abundant materials is desirable in the attempt to avoid environment or economical costs. The use of Cu as a replacement for Ag as a heat reflector is one of the solutions that can be employed. The stability over time is a known issue, copper being prone to atmospheric oxidation and degradation. In this contribution, the stability of Cu obtained by magnetron sputtering is investigated, using both DC and HiPIMS processes for obtaining the Cu thin films. The bias voltage is used to obtain thin films with different properties, their time stability being investigated through the variation of spectrophotometric curves. The best performing thin films are evaluated in theoretical heat reflector structures, using SiNx of different qualities as dielectric layers to form the dielectric/metal/dielectric structure.

(1) Background: The mussel (Mytilus edulis, Mytilus galloprovincialis) is the most widespread lamellibranch mollusk, being fished on all coasts of the European seas. Mussels are also widely grown in Japan, China, and Spain, especially for food purposes. This paper shows an original technique for mussel shell processing for preparation of calcium salts, such as calcium levulinate. This process involves synthesis of calcium levulinate by treatment of Mytilus galloprovincialis shells with levulinic acid. The advantage of mussel shell utilization results in more straightforward qualitative composition. Thus, the weight of the mineral component lies with calcium carbonate, which can be used for extraction of pharmaceutical preparations. (2) Methods: Shell powder was first deproteinized by calcination, then the mineral part was treated with levulinic acid. The problem of shells generally resulting from the industrialization of marine molluscs creates enough shortcomings, if one only mentions storage and handling. One of the solutions proposed by us is the capitalization of calcium from shells in the pharmaceutical industry. (3) Results: The toxicity of calcium levulinate synthesized from the mussel shells was evaluated by the method known in the scientific literature as the Constantinescu phytobiological method (using wheat kernels, Triticum vulgare Mill). Acute toxicity of calcium levulinate was evaluated; the experiments showed the low toxicity of calcium levulinate. (4) Conclusion: The experimental results highlighted calcium as the predominant element in the composition of mussel shells, which strengthens the argument of capitalizing the shells as an important natural source of calcium.

In this study, several wall painting fragments discovered in the Roman baths from the archeological site Alburnus Maior (Roşia Montană, Romania) were analyzed with the aim to investigate the material composition of both plasters and pictorial layers. Dated from the beginning of the second century AD, these rare findings stand among the oldest examples of preserved decorative polychrome paintings on plaster excavated thus far in the former territory of the Roman province of Dacia. A non-destructive multi-analytical approach based on complementary techniques was considered: Fourier transform infrared (FTIR) spectroscopy, X-ray fluorescence (XRF), X-ray diffraction (XRD), UV fluorescence, and hyperspectral imaging (HSI). The obtained results highlight a common Roman color palette mainly based on naturally occurring earth pigments. Red ochre, yellow ochre, manganese-rich ochres/wads, carbon black, and calcite were identified. A traditional two-layer sequence of plasters was found—arriccio (based on lime and siliceous sands), and intonaco (pure lime). The presence of an organic protein binder, identified via FTIR analysis, and sustained by combined imaging documentation, indicates that the pigments were applied a secco. The obtained results are discussed in relation to previous published data, and they can be considered as valuable archeological indicators that contribute to the understanding of the painting techniques and the materials used in the Roman provinces.

A series of new pyrrole derivatives were designed as chemical analogs of the 1,4-dihydropyridines drugs in order to develop future new calcium channel blockers. The new tri- and tetra-substituted N-arylpyrroles were synthesized by the one-pot reaction of 1-methyl-3-cyanomethyl benzimidazolium bromide with substituted alkynes having at least one electron-withdrawing substituent, in 1,2-epoxybutane, acting both as the solvent and reagent to generate the corresponding benzimidazolium N3-ylide. The structural characterization of the new substituted pyrroles was based on IR, NMR spectroscopy as well as on single crystal X-ray analysis. The toxicity of the new compounds was assessed on the plant cell using Triticum aestivum L. species and on the animal cell using Artemia franciscana Kellogg and Daphnia magna Straus crustaceans. The compounds showed minimal phytotoxicity on Triticum rootlets and virtually no acute toxicity on Artemia nauplii, while on Daphnia magna, it induced moderate to high toxicity, similar to nifedipine. Our research indicates that the newly synthetized pyrrole derivatives are promising molecules with biological activity and low acute toxicity.

It has been documented that patients with mental or physical disabilities can benefit from being placed within the setting of a natural environment. Consequently, the concept of creating spaces that can enhance health preservation or patient recovery, while also augmenting environmental and aesthetic value, has merged as a contemporary discourse. Green areas around hospitals can offer a great opportunity to incorporate healing gardens to benefit their patients and not only. The aim of this paper is to propose a design for a sensory-therapeutic garden based on key principles derived from selected academic literature, focusing on the application of these principles in a healthcare setting in Cluj-Napoca, Romania. The design was informed also by onsite data collection and analysis, and it aims to create a healing landscape that addresses the needs of patients, healthcare providers, and visitors. This study seeks to augment the discourse in the field by demonstrating the practical application of key therapeutic garden design principles in a specific context and how these principles impacted the design process. [ABSTRACT FROM AUTHOR]

The goal of this study was to validate an alternative method for determining in vivo acute toxicity using vegetal material instead of laboratory animals, starting from the phytobiological method known also as the Triticum technique. We set out to demonstrate that vegetal cells have similar sensitivity to some toxic agents as animal cells, in which case a statistical correlation could be established. A series of new compounds synthesized by the Romanian National Institute for Chemical Pharmaceutical Research and Development as potential β3 adrenergic receptors agonists were tested for their acute toxicity using classic animal exposure models, before investigating possible anti-diabetic and anti-obesity effects. We then determined whether similar conclusions might be reached exposing vegetal material to the same agents. We successfully demonstrated that plants are affected in a very similar way as animals when exposed to some potentially toxic agents, providing new possibilities for ending unethical animal experiments.

Pseudomonas aeruginosa is a Gram-negative bacillus included among the six “ESKAPE” microbial species with an outstanding ability to “escape” currently used antibiotics and developing new antibiotics against it is of the highest priority. Whereas minimum inhibitory concentration (MIC) values against Pseudomonas aeruginosa have been used previously for QSAR model development, disk diffusion results (inhibition zones) have not been apparently used for this purpose in the literature and we decided to explore their use in this sense. We developed multiple QSAR methods using several machine learning algorithms (support vector classifier, K nearest neighbors, random forest classifier, decision tree classifier, AdaBoost classifier, logistic regression and naïve Bayes classifier). We used four sets of molecular descriptors and fingerprints and three different methods of data balancing, together with the “native” data set. In total, 32 models were built for each set of descriptors or fingerprint and balancing method, of which 28 were selected and stacked to create meta-models. In terms of balanced accuracy, the best performance was provided by KNN, logistic regression and decision tree classifier, but the ensemble method had slightly superior results in nested cross-validation.

Iron is an essential mineral nutrient for all living organisms, involved in a plurality of biological processes. Its deficit is the cause of the most common form of anemia in the world: iron deficiency anemia (IDA). This paper reviews iron content in various parts of 1228 plant species and its absorption from herbal products, based on data collected from the literature in a semi-systematic manner. Five hundred genera randomly selected from the Angiosperms group, 215 genera from the Pteridophytes groups and all 95 Gymnosperm genera as listed in the Plant List version 1.1 were used as keywords together with the word “iron” in computerized searches. Iron data about additional genera returned by those searches were extracted and included in the analysis. In total, iron content values for a number of 1228 species, 5 subspecies, and 5 varieties were collected. Descriptive and inferential statistics were used to compare iron contents in various plant parts (whole plant, roots, stems, shoots, leaves, aerial parts, flowers, fruits, seeds, wood, bark, other parts) and exploratory analyses by taxonomic groups and life-forms were carried out. The absorption and potential relevance of herbal iron for iron supplementation are discussed.

Solidago virgaurea L. (European goldenrod, Woundwort), Asteraceae, is a familiar medicinal plant in Europe and other parts of the world, widely used and among the most researched species from its genus. The aerial parts of European goldenrod have long been used for urinary tract conditions and as an anti-inflammatory agent in the traditional medicine of different peoples. Its main chemical constituents are flavonoids (mainly derived from quercetin and kaempferol), C6-C1 and C6-C3 compounds, terpenes (mostly from the essential oil), and a large number of saponin molecules (mainly virgaureasaponins and solidagosaponins). Published research on its potential activities is critically reviewed here: antioxidant, anti-inflammatory, analgesic, spasmolitic, antihypertensive, diuretic, antibacterial, antifungal, antiparasite, cytotoxic and antitumor, antimutagenic, antiadipogenic, antidiabetic, cardioprotective, and antisenescence. The evidence concerning its potential benefits is mainly derived from non-clinical studies, some effects are rather modest, whereas others are more promising, but need more confirmation in both non-clinical models and clinical trials.

The development of durable photocatalytic supports resistant in harsh environment has become challenging in advanced oxidation processes (AOPs) focusing on water and wastewater remediation. In this study, stainless steel (SS), SS/Ti (N,O) and SS/Cr-N/Cr (N,O) anticorrosion layers on SS meshes were dip-coated with sol gel synthesised C-N-TiO2 photo catalysts pyrolysed at 350 °C for 105 min, using a heating rate of 50 °C/min under N2 gas. The supported C-N-TiO2 films were characterised by scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and Raman spectroscopy. The results showed that C-N-TiO2 was successfully deposited on anticorrosion coated SS supports and had different morphologies. The amorphous C and TiO2 were predominant in C-N-TiO2 over anatase and rutile phases on the surface of SS and anticorrosion supports. The C-N-TiO2 coated films showed enhanced photocatalytic activity for the decolouration of O.II dye under both solar and UV radiations. The fabricated C-N-TiO2 films showed significant antibacterial activities in the dark as well as in visible light. Herein, we demonstrate that SS/Ti(N,O) and SS/Cr-N/Cr(N,O) anticorrosion coatings are adequate photocatalytic and corrosion resistant supports. The C-N-TiO2 photo catalytic coatings can be used for water and wastewater decontamination of pollutants and microbes.

The application of highly active nano catalysts in advanced oxidation processes (AOPs) improves the production of non-selective hydroxyl radicals and co-oxidants for complete remediation of polluted water. This study focused on the synthesis and characterisation of a highly active visible light C–N-co-doped TiO2 nano catalyst that we prepared via the sol-gel method and pyrolysed at 350 °C for 105 min in an inert atmosphere to prevent combustion of carbon moieties. Then we prolonged the pyrolysis holding time to 120 and 135 min and studied the effect of these changes on the crystal structure, particle size and morphology, electronic properties and photocatalytic performance. The physico-chemical characterisation proved that alteration of pyrolysis holding time allows control of the amount of carbon in the TiO2 catalyst causing variations in the band gap, particle size and morphology and induced changes in electronic properties. The C–N–TiO2 nano composites were active under both visible and UV light. Their improved activity was ascribed to a low electron–hole pair recombination rate that enhanced the generation of OH· and related oxidants for total deactivation of O.II dye. This study shows that subtle differences in catalyst preparation conditions affect its physico-chemical properties and catalytic efficiency under solar and UV light.

Drug-induced liver injury (DILI) remains one of the challenges in the safety profile of both authorized and candidate drugs, and predicting hepatotoxicity from the chemical structure of a substance remains a task worth pursuing. Such an approach is coherent with the current tendency for replacing non-clinical tests with in vitro or in silico alternatives. In 2016, a group of researchers from the FDA published an improved annotated list of drugs with respect to their DILI risk, constituting “the largest reference drug list ranked by the risk for developing drug-induced liver injury in humans” (DILIrank). This paper is one of the few attempting to predict liver toxicity using the DILIrank dataset. Molecular descriptors were computed with the Dragon 7.0 software, and a variety of feature selection and machine learning algorithms were implemented in the R computing environment. Nested (double) cross-validation was used to externally validate the models selected. A total of 78 models with reasonable performance were selected and stacked through several approaches, including the building of multiple meta-models. The performance of the stacked models was slightly superior to other models published. The models were applied in a virtual screening exercise on over 100,000 compounds from the ZINC database and about 20% of them were predicted to be non-hepatotoxic.

The present paper presents the models used by the countries that joined the Euro zone after 2000, in fixing the central parity and the evolution of the local currency towards Euro, when participating in Exchange Rate Mechanism II (ERM II). It synthesizes the main theories for determining the equilibrium exchange rate. It also presents the modality of putting them into practice in the countries that had already become members of the Euro zone. The better we know the other countries’ experience in the respect of the joining process to the Euro zone, the better will Romania be able to prepare itself for adopting the unique European currency. Thus, we will be synthesize the main approaches within literature and also in the economic policy deciders’ practice concerning the estimation of the equilibrium exchange rate and implicitly, of the central parity. The paper presents the modality of fixing the central parity and the experience of participating in ERM II for a number of member states that joined the Euro zone after 2000: Greece, Slovakia, Slovenia, Malta, Cyprus and Estonia. For these states we also analyze the evolution of the currency towards Euro while participating in ERM II. Starting from these examples, we explain the advantages and the disadvantages in fixing the central parity over/at/under the value of the exchange rate on the market at the moment of joining ERM II and we underline the problems that might occur in the case of choosing a central parity that is not compatible with the equilibrium value of the exchange rate.

The occurrence of persistent organic contaminants. [...]

The increased detection of organic pollutants in drinking water and their resistance to degradation by wastewater treatment processes has motivated the development of more efficient, affordable and sustainable methods of purification of drinking water and wastewater. [...]

B-ring unsubstituted flavones (of which the most widely known are chrysin, baicalein, wogonin, and oroxylin A) are 2-phenylchromen-4-one molecules of which the B-ring is devoid of any hydroxy, methoxy, or other substituent. They may be found naturally in a number of herbal products used for therapeutic purposes, and several have been designed by researchers and obtained in the laboratory. They have generated interest in the scientific community for their potential use in a variety of pathologies, and understanding their pharmacokinetics is important for a grasp of their optimal use. Based on a comprehensive survey of the relevant literature, this paper examines their absorption (with deglycosylation as a preliminary step) and their fate in the body, from metabolism to excretion. Differences among species (inter-individual) and within the same species (intra-individual) variability have been examined based on the available data, and finally, knowledge gaps and directions of future research are discussed.