Search

The amount of microplastics (MPs) present in marine ecosystems are a growing concern, with potential impacts on human health because they are associated with an increase in the ecotoxicity of certain foods, such as fish. As a result, there has been a growing interest in developing effective methods for the analysis of MPs in marine waters. Traditional methods for MP analysis involve visual inspection and manual sorting, which can be time-consuming and subject to human error. However, novel methods have been developed that offer more efficient and accurate analyses. One such method is based on spectroscopy, such as Fourier transform infrared spectroscopy (FTIR). Another method involves the use of fluorescent dyes, which can selectively bind to microplastics and allow for their detection under UV light. Additionally, machine learning approaches have been developed to analyze large volumes of water samples for MP detection and classification. These methods involve the use of specialized algorithms that can identify and classify MPs based on their size, shape, and texture. Overall, these novel methods offer more efficient and accurate analyses of MPs in marine waters, which is essential for understanding the extent and impacts of MP pollution and for developing effective mitigation strategies. However, there is still a need for continued research and development to optimize these methods and improve their sensitivity and accuracy. [ABSTRACT FROM AUTHOR]

Microplastic pollution is a recently discovered threat to ecosystems requiring the development of new analytical methods. Here, we review classical and advanced methods for microplastic analysis. Methods include visual analysis, laser diffraction particle, dynamic light scattering, scanning electron microscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, thermal analysis, mass spectrometry, aptamer and in vitro selection, and flow cytometry. [ABSTRACT FROM AUTHOR]

Widespread use of plastics in consumer products, packaging, cosmetics, and industrial and agricultural production has resulted in the ubiquitous occurrence of microplastics in terrestrial environment. Compared to the marine environment, only limited studies have investigated the microplastics pollution and associated risk in terrestrial environment. The present review summarizes the global distribution of microplastics in terrestrial environment, their transport pathways and fate, risk to ecosystem and human health, and abatement strategies. Small particle sizes (<500 μm); fragment, fiber, and film shapes; transparent and white color; polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) polymers were the major characteristics of the microplastics found in terrestrial environment. Microplastics in soils negatively affect soil organisms, while the impact of microplastics in terrestrial environment on human health is poorly understood, which needs to be explored further as there is clear evidence on their presence in human bodies. The removal of microplastics from soil environment is quite complex and costly, thus prevention of their releases is preferable. Among the existing abatement options, biodegradation, which harnesses bacterial strains to degrade microplastics through enzymatic hydrolysis, hold promise for terrestrial environment. Strengthening global cooperation, implementing timely policies on plastic use and recycle, and developing new technologies for control of microplastics are recommended to reduce the pollution in terrestrial environment. Global effort on reducing plastic wastes and enhancing their management is imperative, while substitution with biodegradable plastics could help minimize future accumulation of microplastics in terrestrial environment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

China is not only the first reported place of the COVID-19 pandemic but also is the biggest microplastic emitter in the world. Nevertheless, the impact of the COVID-19 pandemic on microplastic pollution in the watersheds of China remains poorly understood. To address this, the present study conducted a data mining and multivariate statistical analysis based on 8898 microplastic samples from 23 Chinese watershed systems before and during the COVID-19 pandemic. The results showed that the COVID-19 pandemic extensively affected the abundance, colors, shapes, polymer types, and particle sizes of microplastic in Chinese watershed systems. Before and during the COVID-19 pandemic, 77.27 % of the Chinese watershed systems observed increased microplastic abundance. Moreover, the COVID-19 pandemic itself, natural conditions (such as altitude and weather), and anthropogenic factors (such as civil aviation throughput) are highly intertwined, jointly impacting the microplastic in the watersheds of China. From the perspective of ecological risks, the COVID-19 pandemic was more likely to aggravate the microplastic pollution in the middle and down reaches of the Yangtze River Watersheds. Overall, whether before or during the COVID-19 pandemic, the main watershed systems of China still stayed at a high pollution level, which rang the alarm bell that watershed systems of China had been at serious ecological risk accused of microplastic contamination., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Specific campaigns to detect microplastics (MPs) in the urban water cycle were carried out in three drinking water plants and two wastewater treatment plants. A self-designed sampler for MPs detection in water matrices was in this study preliminary validated and then tested in long term campaigns sampling up to 1000 L. Raw drinking water and wastewater show microplastics (MPs) concentrations of 2-11 and of 480-801 MPs/m 3 , respectively, and MPs removals of 47-78 % and of 84-98 %, correspondingly. Specific roles of chemical and physical conventional processes in microplastics removals were investigated. Solid-liquid separation, flotation and filtration are the main processes for achieving high microplastics removal. Regarding concentrated matrices, MPs concentrations in sludge samples varied in the range of 5000-500,000 MPs/m 3 . Finally, shapes, size classes and polymers' typologies were investigated in the extracted MPs. The detected sizes are mainly 0.5-0.1 mm in drinking waters while 5-1 mm in wastewaters. Wastewaters were predominated by synthetic fibers (polyester type), while drinking waters were mainly characterized by fragments and the fibers were mostly of natural origin. Finally, the results of this study supported best practices and guidelines for a representative assessment of MPs in water (sampling methods, extraction procedures, characterization and quantification)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Biochar application to amend acidified tobacco-soils can enhance tobacco quality and reduce nitrous oxide (N 2 O) emissions. Microplastics from agricultural mulch are commonly found in cash-crop farmland soils and, together with biochar, affect soil N 2 O emissions. In this study, we applied three types of microplastics (polyethylene, PE; polylactic acid, PLA; polybutylene adipate terephthalate, PBAT) and rice biochar alone or in combination to acidified tobacco planting soil in central China to investigate their effects on soil N 2 O emissions, soil chemical properties, nitrogen-cycle-related functional genes, and microbial functional diversity during a 35-day laboratory incubation period. Significant increases in N₂O emissions were observed with PE and PLA, which raised emissions by 15.96 % and 21.52 %, respectively. Additionally, different microplastics affected soil N₂O emissions through distinct regulatory pathways. Co-application of microplastics and biochar suppressed N 2 O emissions compared to microplastics alone. Biochar mitigates N 2 O emissions mainly by increasing the abundance of the nosZ gene. It can remediate soil contaminated by microplastics and reduce their negative impacts on the soil environment. This study provides deeper insight into the effects of microplastics on soil nitrogen cycling and biochar-mitigated remediation of microplastic-contaminated soil., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Seabirds have become biovectors of plastic pollutants between marine and terrestrial ecosystems, and transport of plastics to their nesting sites becomes relevant due to increasing levels of pollution. To determine the pathways by which plastic reaches their colonies, we analysed the abundance of plastics at the nesting sites of five seabird species (Humboldt penguin Spheniscus humboldti, Peruvian booby Sula variegata, kelp gull Larus dominicanus, grey gull Leucophaeus modestus, Markham's storm-petrel Hydrobates markhami) nesting in northern Chile. Seabirds were primarily grouped according to their nesting behaviour, but two species foraging in contrasting habitats (kelp gull and Markham's storm-petrel) were also compared directly. The abundance, type, and polymer of macro-, meso- and microplastics were analysed in the soil of colonies and control sites, and microplastic ingestion was evaluated for selected species. Densities of plastics in colonies of surface-nesting seabirds ranged from 0 to 21.4 items m -2 (mainly plastic bags and thin films), and 0.002 to 19.7 items m -2 (mainly hard fragments) in colonies of burrow-nesting seabirds. Mean microplastic loads in the stomachs of seabirds were between 3.7 ± 4.2 plastic items individual -1 . Overall, the abundances of plastic items in all seabird colonies were low, suggesting a limited transfer of plastics from sea to land. For kelp gulls, the results indicate transfer of macroplastic items to colonies, reaching the colony via regurgitates, with landfills considered as the main plastic source. Our results suggest that contrasting nesting behaviour and foraging habitats among species can explain differential plastic accumulation in seabird colonies, but also other factors, such as wind, contribute to the accumulation of plastic debris in colonies. Proper management of sanitary landfills are key to reduce plastic contamination of coastal seabirds and their colonies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Microplastics are increasingly recognised as posing a significant environmental threat across systems. Their pervasive presence in freshwater poses a serious concern, given the heavy reliance of both humans and biodiversity on healthy, functioning freshwater ecosystems. Acknowledgment of the potential risks led the transboundary Orange-Senqu River Commission (ORASECOM) to include sampling for microlitter (primarily microplastics) in riverine sediment, surface water, and fishes, across Southern Africa as part of the third Joint Basin Survey (JBS3) in 2021. The aim was to establish a first, basin-wide estimate of microlitter contamination across compartments, setting a baseline for further monitoring. The survey showed that the abundance of microlitter in riverine sediment (0 - 4000 particles.kg -1 dry weight (dw)) and riverine water (1.00 ± 0.71 - 69.75 ± 68.55 SD items.L -1 ) varied considerably between sample sites, with no correlation between the two. The abundance of microlitter in fishes was low (average of 0.7 ± 0.4 items.individual -1 ). Course resolution analyses suggested that microlitter concentrations in riverine sediment and riverine water at each site did not correlate with land use directly upstream, though variation in microlitter abundance did isolate some hotspots of contamination. Discharge data collected from nine gauging stations near sampling sites confirmed that low flows prevailed in the system during the study, with high flows occurring approximately 5 months prior during the summer months. There is some variation in river flow across the catchment which is a likely driver of microlitter transport. This was evident in the polymer composition for sediment and water samples. Based on the average discharge at each gauging station and microlitter concentrations measured in riverine water, the estimated microlitter load ranged from ∼889 particles.s -1 to ∼17.9 million particles.s -1 , with a substantial amount ending likely up in the mudbelt adjacent to the Orange River mouth. This assessment provides a first insight into the characterisation and distribution of microlitter in multiple compartments across the Orange-Senqu River basin. Overall, the findings highlight the need for continued monitoring across compartments at catchment scales to improve our understanding of microplastic pathways into and within riverine systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Microplastics (MPs), an emerging pollutant of global concern, have been studied in the Hongyingzi sorghum production base. In this study, we investigated MPs in the surface soil (0-10 cm) and deeper soil (10-20 cm) in the Hongyingzi sorghum production base. Pollution characterization and ecological risk evaluation were conducted. The results revealed that the MP abundance ranged from 1.31 × 10 2 to 4.27 × 10 3 particles/kg, with an average of 1.42 ± 1.22 × 10 3 particles/kg. There was no clear correlation between the MP abundance and soil depth, and the ordinary kriging method predicted a range of 1.26 × 10 3 -1.28 × 10 3 particles/kg in most of the study area, indicating a relatively uniform distribution. Among the 12 types of MPs detected, acrylates copolymer (ACR), polypropylene (PP), polyurethane (PU), and polymethyl methacrylate (PMMA) were the most frequently detected. These MPs primarily originated from packaging and advertising materials made from polyurethane and polyester used by Sauce Wine enterprises, as well as plastic products made from polyolefin used in daily life and agricultural activities. The particle size of MPs was primarily 20-100 μm. Overall, the proportion of the 20-100 μm MP was 95.1% in the surface soil layer and 86.7% in the deeper soil layer. Based on the pollution load index, the MP pollution level in the study area was classified as class I. Polymer hazard index evaluation revealed that the risk levels at all of the sampling sites ranged from IV to V, and ACR, PU, and PMMA were identified as significant sources of polymer hazard. Potential ecological index evaluation revealed that most of the soil samples collected from the study area were dangerous or extremely dangerous, and the surface soil posed a greater ecological risk than the deeper soil. These findings provide a scientific foundation for the prevention, control, and management of MP pollution in the Hongyingzi sorghum production base., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

As emerging contaminants microplastic particles have become of particular relevance as they are widely present in the environment and of potential concern to human health. Humans are exposed through different routes, with oral intake and inhalation being the most significant. Dietary intake substantially contributes to oral exposure, although data is still lacking. This first-of-its-kind pilot study investigates the influence of different plastic use and food consumption scenarios (normal, low, high) on microplastic content in stool reflecting oral intake by performing an intervention study with fifteen volunteers. Stool samples were analyzed for ten different plastic types in three size fractions including 5-50 μm (qualitative), 50-500 μm and 500-5000 μm (quantitative). In all samples, microplastic particles were detected with median concentrations up to 3.5 particles/g stool in the size fraction 50-500 μm. Polyethylene was the most frequently detected polymer type. The different scenarios did not result in a consistent pattern of microplastics, however, the use of plastics for food packaging and preparation, and the consumption of highly processed food were statistically significantly associated with microplastics content in stool. These results provide initial findings that contribute to filling current knowledge gaps and pave the way for further research., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Environment Agency Austria as institution (contract work) reports financial support was provided by Plastics Europe AISBL. Environment Agency Austria as institution (contract work) reports a relationship with Plastics Europe AISBL that includes: funding grants. Our study received funding from Plastics Europe AISBL as part of its Brigid research project. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Microplastics (MPs) are a developing concern in marine environments, with scientists concentrating more on their effects on various creatures. Sea cucumbers (SCs), as suspension and deposit feeders, are expected to be exposed to and consume MPs in their habitat. The purpose of this methodical review is to gather and integrate accessible research on the presence and effects of MPs on SCs. A systematic search of relevant databases yielded relevant papers exploring the occurrence of MPs in SC habitats as well as the possible effects of MP intake on SCs. Bibliometric analysis was also conducted to collect and analyze a large volume of data. Then the papers were sorted (a total of 249) related to the occurrence and effects of MPs in SCs. Finally, targeted data were collected from the articles for the study. The review emphasizes the ubiquity of MPs in SC ecosystems, citing studies that found high quantities in coastal areas and sediment. MPs have a variety of effects on SCs, with some studies indicating that they lower eating efficiency, affect behavior, and cause tissue damage. However, there is still no unanimity on the overall effects of MP exposure on SCs. This review gives a complete summary of the present state of information about the incidence and impact of MPs on SCs, highlighting the need for additional study in this area. Understanding the possible dangers of MPs on SCs is critical for the survival of these ecologically significant creatures., Competing Interests: Declaration of competing interest The authors claim that they have no known competing financial or personal interests that could have impacted the findings of this study., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Global environmental contamination by microplastics (MPs) is a growing problem with potential One Health impacts. The presence of MPs in vital organs, such as the heart, is of particular concern, but the knowledge is still limited. The goal of the present pilot study was to investigate the potential presence of MPs in the heart of wild specimens of three commercial fish species (Merluccius merluccius, Sardina pilchardus, and Trisopterus luscus) from the North East Atlantic Ocean. Heart samples from 154 fish were analysed for MP content (one heart sample per fish). A total of 44 MPs were recovered from heart samples from the three species. MPs had varied chemical composition (5 polymers), shapes (4) and colours (5). Differences in the profile of the MPs among species was observed (p ≤ 0.05). Thirty fish (19%) had MPs in their hearts, with a total mean (±SD) concentration of 0.286 ± 0.644 MPs/fish. S. pilchardus had the highest heart contamination (p ≤ 0.05). There were no significant (p > 0.05) differences between M. merluccius and T. luscus. These findings in fish with different biological and ecological traits together with literature data suggest that heart contamination likely is a disseminated phenomenon. Therefore, further research on the presence of MPs in the cardiovascular system and its potential health effects is very much needed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Plastic and microplastic pollution in the environment has become a significant global concern. Biodegradable plastics (BPs), as environmentally friendly alternatives to conventional plastics, have also emerged as a crucial topic of global discussion. The successful application of BPs appears to offer a solution to the potential ecological risks posed by conventional plastics. However, BPs have negative impacts on the ecological environment and human health. BPs can gradually degrade into biodegradable microplastics (BMPs) in the environment. Wastewater treatment plants (WWTPs) have become an undeniable source and sink of microplastics. With the production and application of BPs, BMPs will inevitably enter WWTPs. This paper reviews the pollution status, degradation behavior of BMPs, and their potential impact on wastewater treatment performance. The focus is on the environmental behavior of BMPs in wastewater treatment systems. The influences of BMPs on microbial communities, sludge treatment, and disposal are thoroughly discussed. The results indicate that BMPs are more easily decomposed into micro/nanoplastics and release additives compared to conventional microplastics. The effects of BMPs on microbial communities and wastewater treatment depend on their characteristics. The numerous oxygen-containing functional groups on the surface of BMPs enable them to serve a dual purpose as transport media and potential sources of environmental pollutants. Finally, in light of existing knowledge gaps, suggestions and prospects for future research on BMPs are proposed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Competing Interests: Declaration of competing interest The author declares that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Soil contamination by microplastics (MPs) has emerged as a significant global concern. Although traditionally associated with crop production, contemporary understanding of soil health has expanded to include a broader range of factors, including animal safety, microbial diversity, ecological functions, and human health protection. This paradigm shifts underscores the imperative need for a comprehensive assessment of the effects of MPs on soil health. Through an investigation of various soil health indicators, this review endeavors to fill existing knowledge gaps, drawing insights from recent studies conducted between 2021 and 2024, to elucidate how MPs may disrupt soil ecosystems and compromise their crucial functions. This review provides a thorough analysis of the processes leading to MP contamination in soil environments and highlights film residues as major contributors to agricultural soils. MPs entering the soil detrimentally affect crop productivity by hindering growth and other physiological processes. Moreover, MPs hinder the survival, growth, and reproductive rates of the soil fauna, posing potential health risks. Additionally, a systematic evaluation of the impact of MPs on soil microbes and nutrient cycling highlights the diverse repercussions of MP contamination. Moreover, within soil-plant systems, MPs interact with other pollutants, resulting in combined pollution. For example, MPs contain oxygen-containing functional groups on their surfaces that form high-affinity hydrogen bonds with other pollutants, leading to prolonged persistence in the soil environment thereby increasing the risk to soil health. In conclusion, we succinctly summarize the current research challenges related to the mediating effects of MPs on soil health and suggest promising directions for future studies. Addressing these challenges and adopting interdisciplinary approaches will advance our understanding of the intricate interplay between MPs and soil ecosystems, thereby providing evidence-based strategies for mitigating their adverse effects., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study extensively explored the adsorption behavior of heavy metals (Pb +2 , Ni +2 , Cu +2 , Zn +2 , and Cd +2 ) onto microplastics (MPs). The particle sizes of MPs ranged from 0.149 to 0.25 mm. The microplastics were generated from commercial products manufactured from both conventional (polyethylene (PE) bottle, polystyrene (PS) spoon, and polyethylene terephthalate (PET) egg carton) and biodegradable (polylactic acid (PLA) spoon, and polylactic acid (PLA) egg carton) plastics. The study also considered the influence of solution pH on the adsorption capacity of heavy metals. Regarding the adsorption potential for Cu +2 , the ranking was as follows: PLA-egg (1408 μg·g -1 ) > PLA-spoon (735 μg·g -1 ) > PE-bottle (315 μg·g -1 ) > PET-egg (283 μg·g -1 ) > PS-spoon (237 μg·g -1 ). PLA MPs showed the highest adsorption capacity due to the lower thermal stability and higher presence of surface oxygen functional groups. Moreover, the adsorption capacities of the five metals onto PLA-spoon and PLA-egg decreased in the following order: Pb (1785 μg·g -1 ) > Zn (1267 μg·g -1 ) > Cd (748 μg·g -1 ) > Cu (735 μg·g -1 ) > Ni (722 μg·g -1 ), and Pb (1520 μg·g -1 ) > Ni (1412 μg·g -1 ) > Cu (1408 μg·g -1 ) > Zn (1118 μg·g -1 ) > Cd (423 μg·g -1 ), respectively. The SEM-EDS, FTIR and XPS results demonstrated that surface oxygen-containing functional groups play an important role during the adsorption process. This study extended its analysis to quantify the metal content of the post-adsorption MPs, revealing uneven adsorption of heavy metals onto the MPs. This implies that the diversity of commercial plastic products may result in significant variations in their ability to adsorb heavy metals, underscoring the importance of effectively managing discarded commercial plastic products., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Due to the combined influences of marine and terrestrial disturbances, the sources of microplastics (MPs) in mangrove ecosystems are complex and diverse. Previous studies have inferred the possible involvement of mariculture activities as a potential source of mangrove MPs based on the characteristics of MPs. However, the direct contributions of mariculture-derived MPs to mangrove MPs remain largely unknown. In this study, we systematically investigated the fate of MPs in the discharge of mariculture wastewater by quantifying the source contributions of mariculture-derived MPs to rivers and mangroves. The majority of detected MPs were transparent fibers, with their composition primarily comprising materials commonly used in mariculture activities such as polyvinylpyrrolidone (PVP), polyethylene terephthalate (PET), and nylon. The partial least squares path model elucidated the relationships among the composition of MPs in ponds, rivers, and mangroves, indicating that ponds exert a substantial direct effect on mangroves, particularly significant in the sediments (63.68%). Water turbidity, sediment carbon content, and sediment particle size are key ecological factors influencing the abundance of mariculture-derived MPs. This study provides compelling evidence regarding the sources of mangrove MPs and novel insights into mitigating the dissemination of MPs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Microplastic (MP) environmental contamination has been widely studied in Mexico. However, the evaluation of the associated risk to MPs in environmental compartments is scarce. Therefore, this study addresses this issue using diverse indicators such as the Pollution Load Index (PLI), the Polymer Risk Index (PRI), and the Potential Ecological Risk Index (PERI). The results of a meta-analysis revealed high MP contamination levels in most of the studied compartments, which included marine and estuarine waters, beach sand, freshwater, sediments, and biota. Regarding the risk assessment indicators, PLIs indicated low (56%), dangerous (22%), moderate (12%), and high (10%) levels across compartments. Meanwhile, PRIs displayed concerning values, with 36%, 35%, 20%, and 9% exhibiting dangerous, high, moderate, and low levels, respectively. Thus, high PRI values emphasized the significant rise in MP pollution, largely attributed to high-hazard polymer compositions. Otherwise, PERIs showed low (56%), very dangerous (29%), moderate (6%), high (5%), and dangerous (4%) levels. Thus, the ecological risk in Mexico is widespread and mainly linked to MP abundance, polymer type, environmental matrix, and characteristics of organisms. This study represents the first attempt at MP ecological risk assessment in Mexico, providing crucial insights for developing mitigation strategies to address concerns about MP contamination., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The global apprehension regarding the ubiquitous presence of microplastics (MPs) and their associated health risks underscore a significant challenge. However, our understanding on the occurrence and characteristics of this emerging class of pollutants in the different environmental compartments remains limited. For instance, despite housing approximately 20-25% of the global population, the evidence of the atmospheric MPs in Indian Subcontinent is exceedingly rare. Hence, we for the first-time present data on the depositional flux, chemical composition, morphological features of the atmospheric MPs collected from the foothills of Indian Himalayas. The total number of MPs for the collected samples ranged from 65 to 752 particles, with an average of 317 ± 171 particles count. The average flux of atmospheric MPs was 2256 ± 1221 particles/m 2 /day and varied significantly from 462 particles/m 2 /day to 5346 particles/m 2 /day. The highest deposition (5346 particles/m 2 /day) of atmospheric MPs was recorded during the 3rd week of sampling, coinciding with the Diwali festival. Based on the visual characteristics, we determined that the size of MPs ranged from 67 to 2320 μm, with a predominant presence of smaller particles (<1200 μm), primarily composed of fragments and films/sheets. Raman spectroscopy indicated that the analyzed MPs were mainly composed of 4 different polymer types, including PE (46.8 ± 7.2 %), PP (20.9 ± 7.4 %), PS (15.6 ± 3.8 %) and PET (16.7 ± 9.9 %). We further highlighted the extent to which climate variables control the deposition of atmospheric MPs in this urban conglomerate located in the foothills of Himalayas. Our Lagrangian parcel tracking approach showed that the greater frequencies are of local origin and clustered near to the studied region. We also speculate that atmospheric microplastics can be transported along the westerly winds. Though we did not observe any significant relation (p > 0.05) between meteorological parameters and the quantity of atmospheric MPs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Global microplastic pollution has garnered widespread attention from researchers both domestically and internationally. However, compared to other regions worldwide, little is known about microplastic pollution in the marine ecosystems of the Antarctic region. This study investigated the abundance and characteristics of microplastics (MPs) in the gills and intestines of 15 species of Antarctic fish and Antarctic krill (Euphausia superba). The results indicate that the abundance of MPs in Antarctic fish and E. superba ranged from 0.625 to 2.0 items/individual and 0.17 to 0.27 items/individual, with mean abundances of 0.93 ± 0.96 items/individual and 0.23 ± 0.44 items/individual, respectively. Antarctic fish ingested significantly more MPs than E. superba. There was no significant difference in the abundance of MPs between the gills and intestines of Antarctic fish. However, the quantity of pellet-shaped MPs in the gills was significantly higher than in the intestines. The depth of fish habitat influenced the quantity and size of MPs in their bodies, with benthic fish ingesting significantly fewer MPs than pelagic fish. Pelagic fish ingested significantly more MPs sized 1-5 mm than benthic fish. Additionally, analysis of the characteristics of MPs revealed that fiber-shaped MPs were predominant in shape, with sizes generally smaller than 0.25 mm and 0.25-0.5 mm. The predominant colors of MPs were transparent, red, and black, while the main materials were polypropylene (PP), polystyrene (PS), polyamide (PA), and polyvinyl chloride (PVC). Compared to organisms from other regions, the levels of MPs in Antarctic fish and E. superba were relatively low. This study contributes to a better understanding of the extent of MP pollution in Antarctic fish and E. superba, aiding human efforts to mitigate its impact on the environment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that may have seemed to impact the research presented in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Tire wear particles (TWPs) in stormwater runoff have been widely detected and were generally classified into microplastics (MPs). TWPs and conventional MPs can be intercepted and accumulated in stormwater filtration systems, but their impacts on filtration, adsorption and microbial degradation processes of conventional pollutants (organic matters, nitrate and ammonium) have not been clarified. TWPs are different from MPs in surface feature, chemical components, adsorption ability and leaching of additives, which might lead to their different impacts on conventional pollutants removal. In this study, five different levels of aged polyethylene MPs (PEMPs) and aged TWPs contamination in stormwater filtration systems were simulated using thirty-three filtration columns. Results showed that ultraviolet aging treatment was less influential for the aging of TWPs than that of PEMPs, the specific surface area of aged PEMPs (1.603 m 2 /g) was over two times of unaged TWPs (0.728 m 2 /g) in the same size. Aged PEMPs and aged TWPs had different impacts on conventional pollutants removal performance and microbial communities, and the difference might be enlarged with exposure duration. The intensified aged PEMPs contamination generally promoted conventional pollutants removal, whereas aged TWPs showed an opposite trend. Mild contamination (0.01% and 0.1%, wt%) of aged PEMP/TWPs was beneficial to the richness and diversity of microbial communities, whereas higher contamination of aged PEMPs/TWPs was harmful. Aged PEMPs and TWPs had different impact on microbial community structure. Overall, the study found that TWPs were more detrimental than PEMPs in filtration systems. The research underscores the need for more comprehensive investigation into the occurrence, effects and management strategies of TWPs, as well as the importance of distinguishing between TWPs and MPs in future studies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

The prevalence of microplastics (MPs, <5 mm) in natural environments presents a formidable global environmental threat MPs can be found from the Arctic to Antarctica, including glaciers. Despite their widespread distribution, studies on MP accumulation in apex predators inhabiting Polar Regions remain limited. The objective of this study was to conduct a comprehensive examination, for the first time, of MP bioaccumulation in various organs and tissue of Adélie penguins. This investigation comprehends the gastrointestinal tract (GIT), scat, internal organ (lung, trachea, spleen, and liver) and tissue (muscle) samples collected from Svenner Island, Antarctica during the 39th Indian expedition to Antarctica in 2019-2020. Our analyses revealed the presence of 34 MPs across the GIT, scat, lung, and trachea samples, with no MPs detected in muscle, spleen, or liver tissues. Blue-colored microfibers (>50 %) and MPs smaller than 1 mm (38 %) in size were prominently observed. Polymer characterization utilizing μ-FTIR spectroscopy identified low-density polyethylene (LDPE) (~63 %) as the predominant polymer type. The accumulation of MP fibers in the gastrointestinal tract and scat of Adélie penguins may originate from marine ambient media and prey organisms. Furthermore, the presence of LDPE fibers in the trachea and lungs likely occurred through inhalation and subsequent deposition of MPs originating from both local and long-range airborne sources. The identification of fibers ranging between 20 and 100 μm within the trachea suggests a plausible chance of cellular deposition of MPs. Overall our findings provide valuable insights into the organ-specific accumulation of MPs in apex predators. Adélie penguins emerge as promising environmental bio-monitoring species, offering insights into the potential trophic transfer of MPs within frigid environments., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Growing use of synthetic materials has increased the number of stressors that can degrade freshwater ecosystems. Many of these stressors are relatively new and poorly understood, such as microplastics which are now ubiquitous in freshwater systems. The effects of microplastics on freshwater biota must be investigated further in order to better manage and mitigate their impacts. Our experiment provides the first empirical evaluation of stream invertebrate community dynamics in response to microplastics of different concentrations and sizes, in combination with fine sediment, a pervasive known stressor in running waters. In a 7-week streamside experiment using 64 flow-through circular mesocosms, we investigated the effects of exposure to three simulated microplastic influxes (polyethylene microspheres at four levels between 0 and 28,800 items/event) and the addition of fine sediment (to simulate a polluted stream environment). Invertebrate drift was monitored for 48 h immediately after each microplastic influx, and benthic invertebrate communities were sampled after 28 days of microplastic and sediment manipulations. Microplastic concentration, size and fine sediment all had significant factor main effects on several invertebrate drift response metrics, whereas few microplastic main effects were seen in the benthic community. However, interactive stressor effects were common in different combinations between sediment, microplastic size and concentration, suggesting multiple-stressor relationships between microplastics and fine sediment. Microplastic ingestion was witnessed in four of 12 taxa analysed: Hydrobiosidae, Deleatidium spp., Potamopyrgus antipodarum and Archichauliodes diversus. Our findings provide insights into how microplastics affect drift and benthic community dynamics of stream invertebrates in a field-realistic experimental setting and highlight areas requiring further study. These include investigations of invertebrate drift dynamics in response to other types of microplastics, the role invertebrate size may play in determining their vulnerability to microplastic pollution, and framing more microplastic research in a field-realistic multiple-stressor context., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Microplastics (MPs) are ubiquitous pollutant causing severe threat to the biotic and abiotic components of the coastal ecosystem. Accumulation of MPs in the commercially important bivalves Viz. Perna viridis (green mussel) and Meretrix casta (clam) collected from four different locations of Beypore estuary, Southern India was studied. The study focused on the accumulation, characteristics, diversity indices, and human health risk assessment of MPs in the bivalves of Beypore estuary. A total of 120 bivalve samples were examined for the MPs contamination. Whole tissue digestion method using 10% KOH was employed to retrieve the MP content. The results indicate that the average abundance of MPs in Perna viridis is 2.38 ± 1.56 MPs/individual and 0.15 ± 0.09 MP/g/wet weight whereas, for Meretrix casta it is 1.35 ± 1.02 MPs/individual and 0.3 ± 0.27 MP/g/wet weight. Spearman's correlation reveals that there is no significant correlation observed between the abundance of MPs in the bivalves with their morphomertric parameters. The characteristics of MPs in the bivalves are dominated by translucent colored particles (88.95%) in the form of films (45.13%) and fibers (33.6%) having a size ranged between 300 and 1000 μm (51.13%) and composed of polyethylene (54.5%) and polypropylene (20%) polymers. The microplastic index in Meretrix casta ranged between 0.02 and 0.07 whereas for Perna viridis it ranged between 0.08 and 0.10 indicating minimal to moderate MPs contamination. The microplastics diversity integrated index ranged between 0.67 and 0.69 for Meretrix casta whereas, for Perna viridis the value ranged between 0.34 and 0.60 suggests moderate diversity of MPs derived from multiple sources. Based on polymer hazard index, the potential health risk was assessed with a hazard level ranged between II and IV suggesting significant health risk. Systematic monitoring of MPs at river basin scale along with stringent plastic waste management is required to minimize plastic pollution load into the river system., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Microplastics are minute plastic particles ranging from 1 µm to 5 mm in size. Mangroves are crucial ecosystems with roles in carbon sequestration, shoreline protection, and habitat for diverse species. Despite their significance, the extent of microplastic pollution in mangroves, especially in India, remains inadequately understood. To address this gap, we conducted a seasonal sampling in the Kota mangrove ecosystem at different water column depths. Our analysis revealed average microplastic abundances of 0.93 (monsoon), 3.71 (post-monsoon), and 2.92 MPs/L (pre-monsoon). The average microplastic abundances were 19.88 and 15.86 microplastics/individual for Gerres filamentosus and Sillago sihama, respectively. Fibrous microplastics smaller than 1 mm were dominant. Transparent microplastics dominated the water column (28.57% in monsoon, 77.45% in post-monsoon, and 49.24% in pre-monsoon), and they were also prevalent in S. sihama (49.55%) and G. filamentosus (41.51%). This points towards greater bioavailability and suggests that transparent microplastics are often mistaken for prey. Anthropogenic influence is a major factor that governs microplastic distribution than season in Kota mangroves. Fourier transform infrared spectroscopy revealed that polypropylene was the dominant polymer in both water column as well as in S. sihama and G. filamentosus. We identified aquaculture, tourism, and local activities as probable sources of microplastic pollution. The monitoring data is crucial as it provides insights into microplastics pollution in two economically important fish species that are largely consumed by the local population. Exposure to microplastics from the consumption of these fish may cause serious health issues for human beings., Competing Interests: Declarations Ethics approval The Institute Animal Ethics Committee of Kasturba Medical College, Manipal Academy of Higher Education provided approval for this study (IAEC/KMC/09/2023 dated 06.01.2023). Competing interests The authors declare no competing interests., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

In freshwater environments, low-micrometer microplastics (LMMPs) have captured significant attention due to their prevalence and toxicity. Yet, rapid detection of LMMPs (1-10 μm) at the single-particle level within complex freshwater matrices remains a hurdle. We developed an adaptable plasmonic membrane sensor for fast detection of individual LMMPs in eutrophic lake waters. The plasmonic membrane sensor functions both as a membrane filter and as a sensor for LMMP collection and analysis. Among the four types of membrane sensors, polycarbonate track-etch (PCTE) membrane sensors exhibit superior imaging quality for LMMPs due to their flat and homogeneous surfaces. Besides the significantly improved imaging contrast and reduced background interferences, the Raman intensity of LMMPs is enhanced by 48% ± 25% on PCTE membrane sensors compared to unmodified membranes. The increased Raman intensities of a chemical probe with an increasing gold layer thickness and a decreasing membrane pore size suggest a surface-enhanced Raman scattering effect from the membrane sensors. The membrane sensors achieve a detection limit of 1 μg/L and an ultrafast scanning time of 0.01 s for individual LMMPs across natural eutrophic lake water. The developed membrane sensors offer an adaptable tool for the swift and reliable detection of individual LMMPs in complex environmental matrices.

Microplastic (MP) pollution in global marine environments has been extensively reported and attracted significant concerns, but MP distribution in mudflat has rarely been studied. In this paper, the abundance, features and ecological risk of MP in South Yellow Sea Mudflat were investigated comprehensively. MP were both detected in waters (5.4 ± 0.38-11.3 ± 0.78 items/L) and sediments (5.1 ± 0.36-10.1 ± 0.69 items/g) from South Yellow Sea Mudflat. There existed different MP abundance tendencies from sampling Group I (coastal estuary or port) and II (purely coastal mudflat), while MP abundance in water from Group II was lower than that from Group I generally, but MP abundance in sediment from Group I was lower than that from Group II generally. This suggested that MP abundance in mudflat water could be associated with frequent human activities significantly, and disturbance might not be beneficial to MP accumulation in sediments. Fragments, transparent, polyethylene (PE), polypropylene (PP) and polystyrene (PS) were major MP features in mudflat water and sediment, and maximum proportion of size of MP was 0.001-0.25 mm in both water and sediment. Furthermore, the primary risk assessment indicated that MP pollution load for mudflat was low level. However, potential MP ecological risk for mudflat could reach dangerous level to very dangerous level by calculating and evaluating polymer risk index (PRI) and potential ecological risk index (PERI), which could be caused by high proportions of polyvinyl chloride (PVC) and polyacrylonitrile (PAN) with high hazard score. For the first time, reference data about MP pollution from South Yellow Sea Mudflat were supplied in this paper, which would be helpful for management and control of MP in mudflat., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The pervasive presence of microplastics has emerged as a pressing global environmental concern, posing threats to food security and human health upon infiltrating agricultural soils. These microplastics primarily originate from agricultural activities, including fertilizer inputs, compost-based soil remediation, irrigation, and atmospheric deposition. Their remarkable durability and resistance to biodegradation contribute to their persistent presence in the environment. Microplastics within agricultural soils have prompted concerns regarding their potential impacts on agricultural practices. Functioning as significant pollutants and carriers of microcontaminants within agricultural ecosystems, microplastics and their accompanying contaminants represent ongoing challenges. Within these soil ecosystems, the fate and transportation of microplastics can detrimentally affect plant growth, microbial communities, and, subsequently, human health via the food chain. Specifically, microplastics interact with soil factors, impacting soil health and functionality. Their high adsorption capacity for hazardous microcontaminants exacerbates soil contamination, leading to increased adverse effects on organisms and human health. Due to their tiny size, microplastic debris is easily ingested by soil organisms and can transfer through the food chain, causing physiological and/or mechanical damage. Additionally, microplastics can affect plant growth and have the potential to accumulate and be transported within plants. Efforts to mitigate these impacts are crucial to safeguarding agricultural sustainability and environmental health. Future research should delve into the long-term impacts of environmental aging processes on microplastic debris within agricultural soil ecosystems from various sources, primarily focusing on food security and human beings., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The prevalence of microplastics (MPs) in agricultural ecosystems poses a notable threat to dynamics of soil ecosystems, crop productivity, and global food security. MPs enter agricultural ecosystems from various sources and have considerable impacts on the physiochemical properties soil, soil organisms and microbial communities, and plants. However, the intensity of these impacts can vary with the size, shape, types, and the concentrations of MPs in the soil. Besides, MPs can enter food chain through consummation of crops grown on MPs polluted soils. In this study, we conducted a bibliometric analysis of 1636 publications on the effects of MPs on agricultural ecosystems from 2012 to May 2024. The results revealed a substantial increase in publications over the years, and China, the USA, Germany, and India have emerged as leading countries in this field of research. Social network analysis identified emerging trends and research hotspots. The latest burst keywords were contaminants, biochar, polyethylene microplastics, biodegradable microplastics, antibiotic resistance genes, and quantification. Furthermore, we have summarized the effects of MPs on various components of agricultural ecosystems. By integrating findings from diverse disciplinary perspectives, this study provides a valuable insight into the current knowledge landscape, identifies research gaps, and proposes future research directions to effectively tackle the intricate challenges associated with MPs pollution in agricultural environments., (© 2024. The Author(s), under exclusive licence to Springer Nature B.V.)

Karst represents approximately 15% of the planet's surface, hundreds of millions of people live on and rely on these aquifers for water supply and agricultural irrigation. In karstic landscapes, groundwater is exposed in sinkholes, inundated caves, and artesian wells, which are two-way communication spots. When the phreatic level is exposed, the groundwater can change substantially as a result of anthropogenic impacts, modifying the water quality and the environmental integrity by incoming excess nutrients, contaminants, pathogens, and other hazardous substances such as metals and microplastics. In this paper, we develop and test a multimetric index to evaluate the condition status of dolines located within urban areas, including seven indicators: trophic index, fecal bacteria, fecal viruses, microplastics, heavy metals, zooplankton biodiversity, and fish biodiversity. Lastly, we made a proof of concept for the index in the dolines on the island of Cozumel (Mexico), resulting in evaluations from fair to good. The index is powerful due to its sensitivity to pathogens and exotic invasive species. This additive weighted index allows to assess the condition status of dolines in urban areas anywhere in the world; if required, modifications are possible., (© 2024. The Author(s).)

Microplastics (MPs) are emerging pollutants of concern in aquatic ecosystems. Fish ingest MPs accidentally during normal feeding because they resemble prey or by ingesting prey that previously consumed them. Despite severe plastic pollution in Africa, some countries, including Kenya have implemented laws to curb this pollution menace. MPs have scantly been studied in African freshwaters. This study provides empirical data and describes the levels of MPs in four commercially important fish species in Lake Victoria. A total of 95 fish samples were collected from four sampling sites (inshore-offshore waters) between March and May 2022. Microscopy and Attenuated Total Reflectance Fourier Transformed Infrared (ATR-FTIR) spectroscopy methods were used to identify MPs. In this study, 62 out of 95 (65.26%) of the gastrointestinal tracts of the sampled fish contained MPs. The four species showed different proportions of detected MPs among the sampled individuals: 75.00% (Clarias gariepinus), 75.00% (Synodontis victoriae), 71.43% (Lates niloticus), and 59.26% (Oreochromis niloticus). Polystyrene (PS) and poly (perfluorobutadiene) were the main plastic polymers in the fish samples. The condition factors estimated for O. niloticus, S. victoriae, and L. niloticus were > 1 and < 1 for C. gariepinus, respectively. Positive correlations were observed between microplastic numbers and fish length and microplastic numbers and fish weight. However, the low R 2 values obtained implied no strong relationship exists between these parameters. These findings provide evidence of microplastic contamination in fish in Kisumu Bay., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Microplastic contamination in soil ecosystems is a major environmental concern in the world. The current study aims to explore the extent of microplastic pollution in unregulated village dumpsites in India, focusing on the movement of these pollutants from soil to aquatic environments. Soil samples from eight distinct sites (A to H) in six villages were analyzed for various properties, including pH, bulk density, porosity, water retention capacity, hydraulic conductivity, and particle size distribution. The attenuated total reflection-Fourier-transform infrared spectroscopy (ATR-FTIR) method was used to identify prevalent plastic types. The research classifies microplastics by their shape and color, identifying a wide range of particles such as sheets, fibers, foams, fragments, and films. The study also examines the presence and concentration of microplastics in both soil and sediment samples. It was found that PE and PP microplastics are significantly present across different size fractions. Sample A contains a variety of items in the 1-5 mm size range, mainly PE, while the 0.3-1 mm fraction is largely PP. Samples B to H are mostly composed of PE microplastics in different forms. Sample F is unique with a mix of PE, EPS, and a higher amount of red and blue foam particles in the 0.3-1 mm fraction. Microplastics were quantified using stereomicroscopy, revealing concentrations between 80 and 840 numbers per kilogram in soil and 20 to 60 numbers per kilogram in sediments. The findings emphasize the widespread nature of microplastic pollution across ecosystems and the importance of developing effective strategies for monitoring and mitigating their impact on environmental health and human well-being., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Given the convenience of using plastics, addressing the growing concerns about their hazardous health effects is imperative. Consequently, a comprehensive risk assessment is necessary to gauge the potential harm microplastics pose. With its urgent call to action, this study aimed to investigate the indoor source and abundance of microplastics in private dental units during routine professional activities. The current analyzed microplastic quantity variations based on morphological characteristics, seasonal fluctuations and polymer-types. The polymer hazard index (PHI) was calculated to evaluate the significant human health risks posed to dental professionals by inhalation of microplastics. Dust samples were collected using a clean brush and steel pan from various flat and horizontal surfaces within each dental unit. The study found that clinical dental units had fewer microplastics (587 ± 184.9 MPs/g/day) than teaching hospitals (1083.80 ± 133.7MPs/g/day), with comparatively more abundance in winter (31 %). ATR-FTIR analysis determined polyethylene terephthalate to be a more abundant polymer (39 %). This study also found an average inhalation microplastic intake risk of 20.23 MP/g/day and 5259.85 MP/g/year for clinical and 29.45 MP/g/day and 765.12 MP/g/year for teaching hospital dental units. Female dental professionals have 1.1 times more microplastic inhalation risks than male dental professionals. According to PHI findings, overall minor to medium polymer risk was determined. In conclusion, this evidence-based research underscores the urgent need for a shift towards more sustainable practices in the dental healthcare sector. Dental professionals should prioritize using non-plastic material protective equipment and a proper ventilation system to reduce exposure to these particles., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The use of "crumb rubber" coming from recycling materials in outdoor floors like playgrounds has been a frequent practice during the last years. However, these surfaces are object of abrasion and weathering being a potential source of micro and nanoplastics (MNPLs) to the atmosphere and a potential source of human exposure to them. Our main goal has been to expose different crumb rubber materials to summer weathering effects. The released inhalable fractions were sampled for two months with passive samplers and the composition of MNPLs and plastic additives (organic and inorganic) were evaluated. The ecotoxicological effects of leached materials emulating runoff events was evaluated in freshwater micro crustacean Daphnia magna and the green algae Chlorella vulgaris. The analysis of MNPLs showed the presence of polyethylene, polypropylene, polybutadiene, polysiloxanes and polybutylene at concentrations up to 30,426 ng/m 3 . In the same fraction, we also identified up to 56 plastic additives, including antioxidants, pigments, copolymers, flame retardants, fungicides, lubricants, plasticizers, UV filters and metal ions. Finally, runoff ecotoxicological effects on D. magna and C. vulgaris showed that leached compounds, either from virgin or aged material, would be toxicants for exposed organisms although at concentrations much higher than those expected to be released to the media., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

This study analysed ten widely used commercial fishfeeds in aquaculture from six countries spanning three continents to assess microplastic (MP) contamination. MPs with an average abundance of 1130 ± 259.07 particles/kg and an average length of 2.64 ± 0.62 mm ( ± SE) were found in aquaculture feeds, with fibres (85 %) and fragments (15 %). The majority of these MPs were black. The abundance of MPs varied among the samples, with the highest in feed SP (26 %), followed by IF, GA, ELS, NT, EW, TB, GR, VR, and the least in HCF (3 %). Polymers identified consisted of Polyethylene terephthalates (PET, 20 %), Polyamide (PA, 30 %), Polymethyl methacrylate (PMMA), Polyurethane (PU), and Polystyrene (PS) with 15 % each, and Polypropylene (PP, 5 %). SEM-EDX analysis of fibres showed flakes, cracks, and pits and the presence of heavy metals Ni, Cu, Zn, Cr, Au, Hg, Cd, Ti, and Pb. Additionally, some fragments contained Nb (Niobium) alongside the naturally occurring elements. The Polymer Hazard Index (PHI) for the polymers in ten feeds was calculated, and nine were in the highly hazardous category (IV and V) with PHI values ranging from 400-394825. The work showcases the graveness of MPs in fishfeeds and advocates control measures to curtail MPs in fishfeeds for sustainable aquaculture production., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Increasing human activities and improper waste disposal will cause microplastic pollution in surface water. This study analyzed the abundance and characteristics of microplastics, pollution index based on water quality and its relationship with microplastic pollution, and the potential ecological risk of microplastics along the Tambakoso River which is influenced by various land uses of housing, industry, agriculture, and ponds from 16 sampling points. The average abundance of microplastics in the river was 91.80 particles/L. The Kruskal Wallis test showed that there were significant differences between microplastic pollution at each sampling location (Pvalue <0.05). In general, microplastics were mostly found in the form of fragments (48.36 %), transparent color (73.81 %), SMP size (<1 mm) (81.6 %), and dominated by PVC and nylon polymers. However, the characteristics of microplastics at each sampling location varied. The water quality pollution index value showed a slightly polluted category at most points. Redundancy analysis (RDA) showed that the characteristics of the shape and color of microplastics correlated with water quality parameters. The potential ecological risk based on microplastic pollution showed minor, moderate, and high categories at points with industrial land use. This indicates that the distribution of microplastics is closely related to human activities in the area. The level of ecological risk from microplastics depends on the percentage of each plastic polymer, along with its abundance in the environment. This study offers an important basis for designing efficient countermeasures to reduce microplastic pollution and improve water quality in surface waters., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Recent years have witnessed a dramatic increase in global plastic production, leading to heightened concerns over microplastics (MPs) contamination as a significant environmental challenge. MP particles are ubiquitously distributed across both continental and marine ecosystems. Given the paucity of research on MPs in Thailand, particularly regarding MPs contamination in terrestrial environments, this study focused on investigating the distribution and characteristics of MPs in a landfill area. We collected 15 soil samples, 2 leachate samples, and 7 groundwater samples from both inside and outside a municipal landfill situated in the urbanized coastal region of Rayong Province. Our findings revealed variability in MPs concentration across different sample types. In soil, the MP count ranged from 240 to 26,100 pieces per kg of dry soil, 58.71 % of all sample sizes are lower than 0.5 mm. Similarly, the size found in the leachate sample, and the average MP in the leachate samples was 139 pieces per liter of MPs. The groundwater samples showed a fluctuation in MPs count from 18 to 94 pieces per liter, and the size of MPs ranged mostly from 0.5 to 1 mm. The predominant forms of MPs identified were sheets, followed by fragments, fibers, and granules. According to μ-FTIR analysis, the majority of the MPs were composed of polyethylene and polypropylene, commonly used in plastic packaging and ropes. The observed high concentrations and extensive distribution of MP contamination underscore the urgency for further studies and effective management strategies to mitigate the adverse impacts of this pollution on various organisms and ecosystems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The extent of nanoplastic pollution has raised severe environmental and health concerns. While the means for microplastic detection are abundant, improved tools for nanoplastic detection are called-for. State-of-the-art microscopic techniques can detect nanoplastics down to tens of nanometers, however, only from small sample sizes (typically ∼10μl). In this work, we describe a method that enables sampling of 1 l of seawater by the means of correlative Raman- and SEM-techniques. This is achieved by adapting common microplastic sample purification protocols to suit the nanoplastic study. In addition, we decorate a membrane filter with SERS-property to amplify the Raman signals. Together, the purification method combined with the use of the SERS-activated-membrane-filter enables identification and imaging of individual nanoplastic particles from significantly larger sample sizes than before. In the nanoscale the average recovery rate is 5 %. These results aim to provide useful tools for researchers in the fight against plastic pollution., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Arto Hiltunen reports financial support was provided by Weisell-foundation. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The soil environment is a primary destination for contaminants such as microplastics (MPs) and heavy metals (HMs), which are frequently detected simultaneously. The long-term coexistence of MPs and HMs in the soil necessitates unavoidable interactions, affecting their environmental chemical behavior and bioavailability. These co-contaminants pose potential threats to soil organism growth and reproduction, crop productivity, food security, and may jeopardize human health via the food chain. This paper summarizes the sources and trends of MPs in the soil environment, along with the mechanisms and current research status of MP adsorption or desorption of HMs. Additionally, this paper reviews factors affecting HM adsorption on MPs, including MP properties, HM chemical properties, and other environmental factors. Lastly, the effects of MPs and HMs on soil ecology and human health are summarized. The interaction mechanisms and potential biological effects of their co-contamination require further exploration. Future research should delve deeper into the ecotoxic effects of MP-HM co-contamination at cellular and molecular levels, to provide a comprehensive reference for understanding the environmental behavior of their co-contamination in soil., Competing Interests: Declaration of Competing Interest The authors declared that they have no conflicts of interest to this work. We declare that we do not have any commercial or associative interest that represents a conflict of interest in connection with the work submitted., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Microplastics (MPs) are widespread in everyday life, and since wastewater treatment plants (WWTPs) serve as an important route for MPs to enter natural water bodies, a thorough understanding of the distribution and removal of MPs in wastewater treatment plants is of great importance. This article provides a comprehensive overview of the measured distribution of MPs and the current status of their removal in wastewater treatment plants. The main sources of MPs in wastewater treatment plants are personal care products in domestic wastewater, textile clothing and industrial wastewater made from plastics, textile factories and the friction of road tires. The MPs that entered the sewage treatment plant were predominantly in the form of fibers, fragments, granular MPs and other types of MPs. The size of MPs is divided into three categories: <0.5 mm, 0.5-1 mm and 1-5 mm. At all treatment stages in wastewater plants, 56.8-88.4 % of MPs are removed in primary treatment, but the primary sedimentation and degreasing stages remove most MPs. The efficiency of the activated sludge process for secondary treatment is inconsistent and is generally between 42.1 and 99.2 %. The coagulation, filtration and disinfection stages of tertiary treatment all have some MPs removal capacity. In addition, novel removal technologies are also described, such as modified filtration technology, membrane separation technology, electroflocculation, sol-gel and photocatalysis. These novel removal technologies can further limit the entry of microplastics into natural water bodies through sewage treatment plants and improved sewage treatment processes help reduce the risk of MPs entering the natural environment through sewage treatment plants. This article will provide reference for the distribution and removal of microplastics in various levels of WWTPs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study investigated the distribution, abundance, and mass budget of microplastics (MPs) in the Beibu Gulf, Northern South China Sea, focusing on their ecological significance and anthropogenic influence. Microplastics were found in all water and sediment samples, with concentrations in surface water ranging from 0.10 to 0.89 items/m³, and in bottom water from 0 to 0.85 items/m³. Sediment samples exhibited higher levels, ranging from 13.12 to 155.59 items/kg. The spatial distribution revealed higher concentrations along the northern Gulf and Guangxi Province, suggesting significant human influence from coastal activities, such as mariculture and industrial discharges. The study utilized both field data and a mass balance box model to estimate the MPs mass budget, revealing that oceanic flow and riverine discharge are major contributors, accounting for 49% and 52% of MPs, while Atmospheric deposition and sedimentation represents 8% and 1%, respectively. The inventory estimation calculated that 0.24 tons of MPs exist in the water column, and 137 tons in the sediment, emphasizing the substantial environmental burden posed by these pollutants. The significance of this research lies in its comprehensive assessment of MPs in a semi-enclosed gulf, providing critical insight into the role of coastal and hydrodynamic processes in MP distribution. This study highlights the urgent need for better waste management practices in coastal regions to mitigate microplastic pollution and its detrimental effects on marine ecosystems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Microplastics can accumulate in the excess sludge from wastewater treatment plants through domestic wastewater. This study investigated the co-pyrolysis behavior of sewage sludge coexisting with two types of microplastics (polyethylene (PE) and polylactic acid (PLA)) and found a superior comprehensive pyrolysis performance. By calculating the difference between theoretical and experimental weight loss during the pyrolysis process, it was found that the incorporation of microplastics PE and PLA created a synergistic effect at 270°C-450 °C, which was confirmed through the Malek method analysis from a pyrolysis mechanism perspective that it could increase the random nuclei on each particle, that is, enhance the heterogeneous diffusion of volatiles. The average activation energy was reduced by 84.99 kJ/mol, as determined using three isoconversional methods: Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink. Regarding the products, the aforementioned synergistic effect led to a reduction in char retention and larger specific surface area of the biochar, while the quantities of gaseous products and bio-oil escalated. Through a thermogravimetric analyzer and Fourier transform infrared spectroscopy (TG-FTIR), an increase in aromatic hydrocarbons, alkanes, aldehydes, ethers, and esters in the gaseous products were detected. Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) revealed an increase in hydrocarbons, esters, and alcohols in the bio-oil, and acids and aldehydes decreased, overall enhancing the quality of the bio-oil. This study elucidated that pyrolysis completely transformed microplastics in sludge, thus eliminating environmental risks and provided a theoretical reference for understanding the pyrolysis behavior of sludge containing microplastics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Fibrous microplastics (FMPs), a unique class of microplastics, are increasingly recognized as a significant environmental threat due to their ubiquitous presence and potential risks to ecological and human health. This review provides a comprehensive overview of FMPs, including their sources, prevalence in various environmental media, and potential impacts. FMPs, which can be found in over 90 % of certain environmental samples, originate from a diverse range of sources, including synthetic textiles, landfill waste, industrial emissions, and atmospheric deposition. These persistent pollutants pose a threat to both terrestrial and marine ecosystems. Their insidious presence can lead to ingestion by organisms, potentially disrupting ecosystems and posing risks to human health. Addressing the challenge of FMPs requires a multi-faceted approach. Reducing the production and use of synthetic fibers, implementing effective waste management practices, and developing new technologies to remove FMPs from wastewater and the broader environment are all crucial components of the solution. However, further research is essential to fully understand the long-term implications of FMPs on ecosystems and human health, laying the foundation for the development of robust and effective mitigation strategies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Despite the urgent need for accurate and robust observations of microplastics in the marine environment to assess current and future environmental risks, existing procedures remain labour-intensive, especially for smaller-sized microplastics. In addition to this, microplastic analysis faces challenges due to environmental weathering, impacting the reliability of research relying on pristine plastics. This study addresses these knowledge gaps by testing the robustness of two automated analysis techniques which combine machine learning algorithms with fluorescent colouration of Nile red (NR)-stained particles. Heterogeneously shaped uncoloured microplastics of various polymers-polyethylene (PE), polyethylene terephthalate (PET), polypropylene (PP), polystyrene (PS), and polyvinyl chloride (PVC)-ranging from 100 to 1000 µm in size and weathered under semi-controlled surface and deep-sea conditions, were stained with NR and imaged using fluorescence stereomicroscopy. This study assessed and compared the accuracy of decision tree (DT) and random forest (RF) models in detecting and identifying these weathered plastics. Additionally, their analysis time and model complexity were evaluated, as well as the lower size limit (2-4 µm) and the interoperability of the approach. Decision tree and RF models were comparably accurate in detecting and identifying pristine plastic polymers (both > 90%). For the detection of weathered microplastics, both yielded sufficiently high accuracies (> 77%), although only RF models were reliable for polymer identification (> 70%), except for PET particles. The RF models showed an accuracy > 90% for particle predictions based on 12-30 pixels, which translated to microplastics sized < 10 µm. Although the RF classifier did not produce consistent results across different labs, the inherent flexibility of the method allows for its swift adaptation and optimisation, ensuring the possibility to fine-tune the method to specific research goals through customised datasets, thereby strengthening its robustness. The developed method is particularly relevant due to its ability to accurately analyse microplastics weathered under various marine conditions, as well as ecotoxicologically relevant microplastic sizes, making it highly applicable to real-world environmental samples., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Highway stormwater (HSW) runoff is among the environment's most important sources of microplastics. This study aimed to characterize via vibrational spectroscopy and quantify SMPs (small microplastics < 100 µm) in HSW runoff from a trafficked highway entering a facility equipped with a filtration system and in those flowing out to the receiving water body near agricultural activities. Samples of the inlet runoff (from the highway) and outlet runoff (the discharge into the environment) were collected in different periods to investigate potential seasonal and spatial differences. The sampling, methodology, and analysis were thoroughly carried out to quantify and simultaneously identify SMPs via Micro-FTIR to obtain a specific novel dataset to assess the environmental quality of highway pollution. A significant difference between inlet and outlet samples was reported; the highest abundance in inlet samples was 39813 ± 277 SMPs L .1 (SW10 IN; average length of 77 µm), while the highest one in outlet samples was 15173 ± 171 SMPs L -1 (SW10 OUT; SMPs' average length of 63 µm). Polyamide 6 (PA 6) and High-Density Polyethylene (HDPE) were predominant. Our results show that these HSW treatment plants, designed for managing regulated pollutants, can intercept SMPs, improving the quality of HSW runoff discharged into the environment., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Microplastics (MPs) have attracted increasing attention worldwide owing to their widespread presence and potential risks to terrestrial and marine ecosystems. Estimating the pollution status and risk levels of MPs in coastal ecosystems is necessary; however, these are poorly understood in coastal megacities. Here, the abundance and characteristics of MPs in seawater, marine sediment, marine organisms, and beaches in the Shenzhen coastal ecosystems and land sources (river and sewage outfall) were simultaneously investigated, and the annual MPs load of rivers and MP-induced ecological risks were evaluated. The results showed that MPs pollution was prevalent in Shenzhen coastal ecosystems, with the average abundances of 2.40 ± 2.48 items/m 3 , 404.21 ± 431.48 items/kg, 1.66 ± 1.96 items/individual, and 1648.99 ± 1908.19 items/kg in seawater, marine sediment, marine organisms, and beach sands, respectively. The detected MPs were predominantly fibrous/granular, transparent/white, < 1 mm in size, and polyethylene terephthalate/polyethylene/polystyrene. The spatial distribution patterns of marine MPs are influenced mainly by anthropogenic activities and freshwater inflows (rivers and sewage outfalls). Pollution hotspots of MPs were identified in the Pearl River Estuary, which has a high population, gross domestic product, and river and wastewater discharge. Furthermore, the negative correlation between the abundance of MPs in seawater and salinity indicates that freshwater inflow carrying MPs to the sea is an important source of marine MPs pollution. It has been estimated that approximately 8320 billion MPs particles, weighing 274.55 tons, flow into the Shenzhen coast annually through river input. Based on the MPs polymer types and quantities, the ecological risk of MPs pollution in the Shenzhen coastal ecosystem is moderate and deserves further attention. These findings deepen the understanding of MPs pollution, sources, and ecological risks in the southern coastal region of China, and are helpful for employing effective management strategies to control marine MPs pollution., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Seagrass beds, as an important coastal blue carbon ecosystem, are excellent at storing organic carbon and mitigating the impacts of global climate change. However, seagrass beds are under threat due to increased human activities and ubiquitous presence of microplastics (MPs) in marine environments. Bibliometric analysis shows that the distribution and accumulation of microplastics in seagrass beds has been widely documented worldwide, but their impacts on seagrass beds, particularly on carbon sequestration capacity, have not been given sufficient attention. This review aims to outline the potential impacts of MPs on the carbon sequestration capacity of seagrass ecosystems across five key aspects: (1) MPs act as sources of organic carbon, contributing to direct pollution in seagrass ecosystems; (2) Impacts of MPs on seagrasses and their epiphytic algae, affecting plant growth and net primary productivity; (3) Impacts of MPs on microorganisms, influencing production of recalcitrant dissolved organic carbon and greenhouse gas; (4) Impacts of MPs on seagrass sediments, altering the quality, structure, properties and decomposition processes of plant litters; (5) Other complex impacts on the seagrass ecosystems, depending on different behaviors of MPs. Latest progress in these fields are summarized and recommendations for future work are discussed. This review can provide valuable insights to facilitate future multidisciplinary investigations and encourage society-wide implementation of effective conservation measures to enhance the carbon sequestration capacity of seagrass beds., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

In recent years the microplastics research community has called for methods harmonization and standardized metrics of reporting microplastic attributes. While alignment of research practices is essential in obtaining robust microplastic data, resource managers need to balance how the cost and effort of methodologies compare to data output. The intention of this study is to compare two recommended methods for isolating anthropogenic microparticles in fish gastrointestinal tracts. Using Icelandic capelin (Mallotus villosus) as a study species, with potassium hydroxide (KOH) digestion, we compared a 1.2 μm filtration and 45 μm sieving protocols for isolating ingested anthropogenic microparticles. We compared methods based on the amount of time they took to conduct, the cost of the materials and equipment required, levels of procedural contamination, and data output. We found no significant differences in the materials costs or procedural contamination between the two methods. However, the two protocols resulted in anthropogenic microparticles with significantly different characteristics (i.e. colour, length, morphology), and the 45 μm sieving protocol took longer to conduct per sample. Our results contribute towards a more holistic understanding of microplastic research methods, their relative costs, and how they contribute to data outputs and development of large-scale monitoring programs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Crown Copyright © 2024. Published by Elsevier Ltd. All rights reserved.)

This study presents the first definitive confirmation of microplastic presence in the human stomach, based on samples from 26 cadavers. 97 microplastic particles were extracted from stomach contents, across all 26 individuals, revealing a universal prevalence of microplastics in the cadavers. Morphological analysis of the extracted particles unveiled distinct shapes, with fibers constituting the majority (52.04 %), followed by fragments (39.80 %) and films (8.16 %). The average quantity of microplastics per individual was calculated to be 9.4 ± 10.4 particles, with an estimated daily intake of microplastics at 32.2 particles per day. These figures are lower than estimates derived from both daily microplastic consumption alone and notably, those calculated from stool analyses. Our study also suggests that the breakdown or transformation of microplastics cannot be ruled out during their passage through the digestive tract. Although the number of microplastics in stomach contents reported in this study was even lower than the daily microplastic intake rates reported in the literature, it provides conclusive evidence for the presence of microplastics in the human stomach and provides important preliminary data in terms of the risks that may arise for human health., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This work reports a characterization of microplastics (MPs) and microrubbers (MRs) such as color, size, shape, and the chemical composition in snowfall in central Iran (Qom) at five sites. Identification of MPs and MRs involved using a stereo microscope to evaluate physical characteristics such as thickness, shininess, hardness, and reaction to a hot needle. HYSPLIT trajectory and end-member microplastic (PM) mixing models are used to determine the contribution of local and remote sources to MPs. The mean (±SD) abundance of MPs and MRs is 23.8 ± 15.87 (MP/L) and 1.26 ± 1.16 (MR/L), respectively, whereas the mean (±SD) abundance of MPs and MRs is 30.7 ± 19.36 (MP/m 2 ) and 1.58 ± 1.39 (MR/m 2 ), respectively. The frequency of MP colors in order are: black (63.8%) > red (12.8%) > blue (11 %) > white (9.1%) > green (2.1%) > yellow (1.3%). About 71.6% and 3.6% of the identified MPs are 250-500 μm and >1000 μm, respectively. Snow samples contain different identified polymers such as polyethylene terephthalate (PET), nylon, viscose, polypropylene (PP), polyethylene (PE), polystyrene (PS), and polyvinyl chloride (PVC). Analysis reveals that 90% of Qom city's snowy day winds come from local sources. The high MP levels in are due to human activities from local origins according to end-member MP mixing model. Further study is needed to understand the potential impacts of MPs and MRs on ecosystems and human health., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)