Search

In situ X-ray absorption spectroscopy (XAS) in catalysis research has traditionally been conducted by making one measurement at a time on a single sample. In an industrial research environment this is especially limiting as sample throughput (productivity) and turnaround time (direct project relevance) are critical issues in the use of XAS in a fast-moving technology delivery project. In order to address these issues we have developed and implemented a four-channel ionization chamber combined with two different in situ cells that allows XAS data to be collected simultaneously from four samples, or four regions, in transmission geometry without any sample or detector movement. In the development of this new capability it was realized that there are other benefits from this simultaneous detection in addition to increased productivity. Namely, (i) the use of EXAFS to determine the structure of a catalyst in situ axially at four different positions down a catalyst bed; (ii) the ability to collect up to four XAFS spectra simultaneously and thereby avoid any scan-to-scan uncertainties, and (iii) the added confidence in the ability to discriminate small differences in similarly prepared catalysts which is typical in the development of a commercial catalyst. Specific illustrations of each of these applications are shown. The methodology is simple to implement and could be used on any XAFS beamline with a horizontal fan of radiation, such as at a typical bending magnet or wiggler source beamline.

Many of the molecules involved in biological signaling processes are easily oxidized and have been monitored by electrochemical methods. Temporal response, spatial considerations, and sensitivity of the electrodes must be optimized for the specific biological application. To monitor exocytosis from single cells in culture, constant potential amperometry offers the best temporal resolution, and a low-noise picoammeter improves the detection limits. Smaller electrodes, with 1-micron diameters, provided spatial resolution sufficient to identify the locations of release sites on the surface of single cells. For the study of neurotransmitter release in vivo, larger cylindrical microelectrodes are advantageous because the secreted molecules come from multiple terminals near the electrode, and the greater amounts lead to a larger signal that emerges from the Johnson noise of the current amplifier. With this approach, dopamine release elicited by two electrical stimulus pulses at 10 Hz was detected with fastscan cyclic voltammetry in vivo. Nafion-coated elliptical electrodes have previously been shown to be incapable of detecting such concentration changes without extensive signal averaging. In addition, we demonstrate that high-pass filtering (200 Hz) of cyclic voltammograms recorded at 300 V/s decreases the background current and digitization noise at these microelectrodes, leading to an improved signal. Also, high-pass filtering discriminated against ascorbic acid, DOPAC, and acidic pH changes, three common interferences in vivo.

Fast-scan cyclic voltammetry (FSCV) at carbon-fiber microelectrodes was used to investigate catecholamine release and uptake induced by local electrical stimulation of rat brain slices containing the basolateral amygdaloid nucleus. The amygdala contains less catecholamine than the striatum, and the observed release is proportionately smaller. Stimulus trains of long duration were required to obtain a well-resolved concentration change in the basolateral amygdala. Voltammetric detection of catecholamines under these conditions was complicated by interference from two extracellular ions, H+ and Ca2+. Ion-selective microelectrodes were used in conjunction with carbon-fiber microelectrodes to monitor pH and Ca2+. The magnitude of the pH changes was correlated with stimulation length and followed the pattern of a brief alkaline shift followed by a longer acidic shift. Extracellular Ca2+ concentration decreased during stimulation and returned fairly rapidly to baseline after the stimulation was over. Because it was not possible to account for all of the ionic interferences using information in the voltammograms, other strategies were employed. Exposure of amygdala slices to L-DOPA or DA increased electrically evoked release of catecholamine, but the effect was transient, and uptake rates decreased during continued exposure to these agents. The most successful approach to remove the interferences was to subtract the response obtained after exposure of the slice to the catecholamine depleter, Ro 4-1284. This agent eliminates the catecholamine response but does not appear to alter the ionic changes.