Search

Aromatic compounds are an important source of commodity chemicals traditionally produced from fossil fuels. Aromatics derived from plant lignin can potentially be converted into commodity chemicals through depolymerization followed by microbial funneling of monomers and low molecular weight oligomers. This study investigates the catabolism of the β-5 linked aromatic dimer dehydrodiconiferyl alcohol (DC-A) by the bacterium Novosphingobium aromaticivorans . We used genome-wide screens to identify candidate genes involved in DC-A catabolism. Subsequent in vivo and in vitro analyses of these candidate genes elucidated a catabolic pathway composed of four required gene products and several partially redundant dehydrogenases that convert DC-A to aromatic monomers that can be funneled into the central aromatic metabolic pathway of N. aromaticivorans . Specifically, a newly identified γ-formaldehyde lyase, PcfL, opens the phenylcoumaran ring to form a stilbene and formaldehyde. A lignostilbene dioxygenase, LsdD, then cleaves the stilbene to generate the aromatic monomers vanillin and 5-formylferulate (5-FF). We also showed that the aldehyde dehydrogenase FerD oxidizes 5-FF before it is decarboxylated by LigW, yielding ferulic acid. We found that some enzymes involved in the β-5 catabolism pathway can act on multiple substrates and that some steps in the pathway can be mediated by multiple enzymes, providing new insights into the robust flexibility of aromatic catabolism in N. aromaticivorans . A comparative genomic analysis predicted that the newly discovered β-5 aromatic catabolic pathway is common within the order Sphingomonadales., Importance: In the transition to a circular bioeconomy, the plant polymer lignin holds promise as a renewable source of industrially important aromatic chemicals. However, since lignin contains aromatic subunits joined by various chemical linkages, producing single chemical products from this polymer can be challenging. One strategy to overcome this challenge is using microbes to funnel a mixture of lignin-derived aromatics into target chemical products. This approach requires strategies to cleave the major inter-unit linkages of lignin to release monomers for funneling into valuable products. In this study, we report newly discovered aspects of a pathway by which the Novosphingobium aromaticivorans DSM12444 catabolizes aromatics joined by the second most common inter-unit linkage in lignin, the β-5 linkage. This work advances our knowledge of aromatic catabolic pathways, laying the groundwork for future metabolic engineering of this and other microbes for optimized conversion of lignin into products., Competing Interests: The authors declare no conflict of interest.

Enzymatic biodegradation of polymers, such as polyamides (PA), has the potential to cost-effectively reduce plastic waste, but enhancements in degradation efficiency are needed. Engineering enzymes through directed evolution is one pathway toward identification of critical domains needed for improving activity. However, screening such enzymatic libraries (100s-to-1000s of samples) is time-consuming. Here we demonstrate the use of robotic autosampler (PAL) and immediate drop on demand technology (I.DOT) liquid handling systems coupled with open-port sampling interface-mass spectrometry (OPSI-MS) to screen for PA6 and PA66 hydrolysis by 6-aminohexanoate-oligomer endo -hydrolase (nylon hydrolase, NylC) in a high-throughput (8-20 s/sample) manner. The OPSI-MS technique required minimal sample preparation and was amenable to 96-well plate formats for automated processing. Enzymatic hydrolysis of PA characteristically produced soluble linear oligomer products that could be identified by OPSI-MS. Incubation temperatures and times were optimized for PA6 (65 °C, 24 h) and PA66 (75 °C, 24 h) over 108 experiments. In addition, the I.DOT/OPSI-MS quantified production of PA6 linear dimer (8.3 ± 1.6 μg/mL) and PA66 linear monomer (13.5 ± 1.5 μg/mL) by NylC with a lower limit of detection of 0.029 and 0.032 μg/mL, respectively. For PA6 and PA66, linear oligomer production corresponded to 0.096 ± 0.018% and 0.204 ± 0.028% conversion of dry pellet mass, respectively. The developed methodology is expected to be utilized to assess enzymatic hydrolysis of engineered enzyme libraries, comprising hundreds to thousands of individual samples.

Multidimensional measurements using state-of-the-art separations and mass spectrometry provide advantages in untargeted metabolomics analyses for studying biological and environmental bio-chemical processes. However, the lack of rapid analytical methods and robust algorithms for these heterogeneous data has limited its application. Here, we develop and evaluate a sensitive and high-throughput analytical and computational workflow to enable accurate metabolite profiling. Our workflow combines liquid chromatography, ion mobility spectrometry and data-independent acquisition mass spectrometry with PeakDecoder, a machine learning-based algorithm that learns to distinguish true co-elution and co-mobility from raw data and calculates metabolite identification error rates. We apply PeakDecoder for metabolite profiling of various engineered strains of Aspergillus pseudoterreus, Aspergillus niger, Pseudomonas putida and Rhodosporidium toruloides. Results, validated manually and against selected reaction monitoring and gas-chromatography platforms, show that 2683 features could be confidently annotated and quantified across 116 microbial sample runs using a library built from 64 standards., (© 2023. Battelle Memorial Institute and the Author(s).)

A bacterial isolate, B1D3A T , was isolated from river sediment collected from the Hiwassee River near Calhoun, TN, by enrichment culturing with a model 5-5' lignin dimer, dehydrodivanillate, as its sole carbon source. B1D3A T was also shown to utilize several model lignin-derived monomers and dimers as sole carbon sources in a variety of minimal media. Cells were Gram-stain-negative, aerobic, motile, rod-shaped and formed yellow/cream-coloured colonies on rich agar. Optimal growth occurred at 30 °C, pH 7-8, and in the absence of NaCl. The major fatty acids of B1D3A T were C 18 : 1  ω7 c and C 17 : 1  ω6 c . The predominant hydroxy fatty acids were C 14 : 0 2-OH and C 15 : 0 2-OH. The polar lipid profile consisted of a mixture of phosphatidylethanolamine, phosphatidylglycerol, diphosphatidylglycerol, phosphatidyldimethylethanolamine and sphingoglycolipid. B1D3A T contained spermidine as the only major polyamine. The major isoprenoid quinone was Q-10 with minor amounts of Q-9 and Q-11. The genomic DNA G+C content of B1D3A T was 65.6 mol%. Phylogenetic analyses based on 16S rRNA gene sequences and coding sequences of 49 core, universal genes defined by Clusters of Orthologous Groups gene families indicated that B1D3A T was a member of the genus Sphingobium . B1D3A T was most closely related to Sphingobium sp. SYK-6, with a 100 % 16S rRNA gene sequence similarity. B1D3A T showed 78.1-89.9 % average nucleotide identity and 19.5-22.2% digital DNA-DNA hybridization identity with other type strains from the genus Sphingobium . On the basis of phenotypic and genotypic properties and phylogenetic inference, strain B1D3A T should be classified as representing a novel species of the genus Sphingobium , for which the name Sphingobium lignivorans sp. nov. is proposed. The type strain is strain B1D3A T (ATCC TSD-279 T =DSM 111877 T ).

Lignin valorization is being intensely pursued via tandem catalytic depolymerization and biological funneling to produce single products. In many lignin depolymerization processes, aromatic dimers and oligomers linked by carbon-carbon bonds remain intact, necessitating the development of enzymes capable of cleaving these compounds to monomers. Recently, the catabolism of erythro -1,2-diguaiacylpropane-1,3-diol ( erythro -DGPD), a ring-opened lignin-derived β-1 dimer, was reported in Novosphingobium aromaticivorans . The first enzyme in this pathway, LdpA (formerly LsdE), is a member of the nuclear transport factor 2 (NTF-2)-like structural superfamily that converts erythro -DGPD to lignostilbene through a heretofore unknown mechanism. In this study, we performed biochemical, structural, and mechanistic characterization of the N. aromaticivorans LdpA and another homolog identified in Sphingobium sp. SYK-6, for which activity was confirmed in vivo. For both enzymes, we first demonstrated that formaldehyde is the C 1 reaction product, and we further demonstrated that both enantiomers of erythro -DGPD were transformed simultaneously, suggesting that LdpA, while diastereomerically specific, lacks enantioselectivity. We also show that LdpA is subject to a severe competitive product inhibition by lignostilbene. Three-dimensional structures of LdpA were determined using X-ray crystallography, including substrate-bound complexes, revealing several residues that were shown to be catalytically essential. We used density functional theory to validate a proposed mechanism that proceeds via dehydroxylation and formation of a quinone methide intermediate that serves as an electron sink for the ensuing deformylation. Overall, this study expands the range of chemistry catalyzed by the NTF-2-like protein family to a prevalent lignin dimer through a cofactorless deformylation reaction.

Mobilizable plasmids are extra-chromosomal, circular DNA that have contributed to the rapid evolution of bacterial genomes and have been used in environmental, biotechnological, and medicinal applications. Degradative plasmids with genetic capabilities to degrade organic contaminants, such as polycyclic aromatic hydrocarbons (PAHs), have the potential to be useful for more environmentally friendly and cost-effective remediation technologies compared to existing physical remediation methods. Genetic bioaugmentation, the addition of catabolic genes into well-adapted communities via plasmid transfer (conjugation), is being explored as a remediation approach that is sustainable and long-lasting. Here, we explored the effect of the ecological growth strategies of plasmid donors and recipients on conjugation and naphthalene degradation of two PAH-degrading plasmids, pNL1 and NAH7. Overall, both pNL1 and NAH7 showed conjugation preferences towards a slow-growing ecological growth strategy, except when NAH7 was in a mixed synthetic community. These conjugation preferences were partially described by a combination of growth strategy, GC content, and phylogenetic relatedness. Further, removal of naphthalene via plasmid-mediated degradation was consistently higher in a community consisting of recipients with a slow-growing ecological growth strategy compared to a mixed community or a community consisting of fast-growing ecological growth strategy. Understanding plasmid conjugation and degradative preferences has the capacity to influence future remediation technology design and has broad implications in biomedical, environmental, and health fields., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

In eukaryotes, fine-scale maps of meiotic recombination events have greatly advanced our understanding of the factors that affect genomic variation patterns and evolution of traits. However, in bacteria that lack natural systems for sexual reproduction, unbiased characterization of recombination landscapes has remained challenging due to variable rates of genetic exchange and influence of natural selection. Here, to overcome these limitations and to gain a genome-wide view on recombination, we crossed Bacillus strains with different genetic distances using protoplast fusion. The offspring displayed complex inheritance patterns with one of the parents consistently contributing the major part of the chromosome backbone and multiple unselected fragments originating from the second parent. Our results demonstrate that this bias was in part due to the action of restriction-modification systems, whereas genome features like GC content and local nucleotide identity did not affect distribution of recombination events around the chromosome. Furthermore, we found that recombination occurred uniformly across the genome without concentration into hotspots. Notably, our results show that species-level genetic distance did not affect genome-wide recombination. This study provides a new insight into the dynamics of recombination in bacteria and a platform for studying recombination patterns in diverse bacterial species., (© The Author(s) 2022. Published by Oxford University Press on behalf of Nucleic Acids Research.)

The rapidly growing industry of crop biostimulants leverages the application of plant growth promoting rhizobacteria (PGPR) to promote plant growth and health. However, introducing nonnative rhizobacteria may impact other aspects of ecosystem functioning and have legacy effects; these potential consequences are largely unexplored. Nontarget consequences of PGPR may include changes in resident microbiomes, nutrient cycling, pollinator services, functioning of other herbivores, disease suppression, and organic matter persistence. Importantly, we lack knowledge of whether these ecosystem effects may manifest in adjacent ecosystems. The introduced PGPR can leave a functional legacy whether they persist in the community or not. Legacy effects include shifts in resident microbiomes and their temporal dynamics, horizontal transfer of genes from the PGPR to resident taxa, and changes in resident functional groups and interaction networks. Ecosystem functions may be affected by legacies PGPR leave following niche construction, such as when PGPR alter soil pH that in turn alters biogeochemical cycling rates. Here, we highlight new research directions to elucidate how introduced PGPR impact resident microbiomes and ecosystem functions and their capacity for legacy effects., (© 2022 Oak Ridge National Laboratory. New Phytologist © 2022 New Phytologist Trust.)

Lignin is an abundant and sustainable source of aromatic compounds that can be converted to value-added products. However, lignin is underutilized, since depolymerization produces a complex mixture of aromatic compounds that is difficult to convert to a single product. Microbial conversion of mixed aromatic substrates provides a potential solution to this conversion challenge. Recent advances have expanded the range of lignin-derived aromatic substrates that can be assimilated and demonstrated efficient conversion via central metabolism to new potential products. The development of additional non-model microbial hosts and genetic tools for these hosts have accelerated engineering efforts. However, yields with real depolymerized lignin are still low, and additional work will be required to achieve viable conversion processes., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Lignin biosynthesis typically results in a polymer with several inter-monomer bond linkages, and the heterogeneity of linkages presents a challenge for depolymerization processes. While several enzyme classes have been shown to cleave common dimer linkages in lignin, the pathway of bacterial β-1 spirodienone linkage cleavage has not been elucidated. Here, we identified a pathway for cleavage of 1,2-diguaiacylpropane-1,3-diol (DGPD), a β-1 linked biaryl representative of a ring-opened spirodienone linkage, in Novosphingobium aromaticivorans DSM12444. In vitro assays using cell lysates demonstrated that RS14230 (LsdE) converts DGPD to a lignostilbene intermediate, which the carotenoid oxygenase, LsdA, then converts to vanillin. A Pseudomonas putida KT2440 strain engineered with lsdEA expression catabolizes erythro-DGPD, but not threo-DGPD. We further engineered P. putida to convert DGPD to a product, cis,cis-muconic acid. Overall, this work demonstrates the potential to identify new enzymatic reactions in N. aromaticivorans and expands the biological funnel of P. putida for microbial lignin valorization., (Copyright © 2021 International Metabolic Engineering Society. All rights reserved.)

Many soil microorganisms have evolved catabolic strategies to utilize phenolic compounds arising from depolymerized lignin. We report the complete genome sequences of four Pseudomonas sp. isolates that demonstrated robust growth on a wide range of aromatic monomers and dimers that are relevant to the valorization of lignin into value-added chemicals., (Copyright © 2020 Hatmaker et al.)

Valorization of all major lignocellulose components, including lignin, cellulose, and hemicellulose is critical for an economically viable bioeconomy. In most biochemical conversion approaches, the standard process separately upgrades sugar hydrolysates and lignin. Here, we present a new process concept based on an engineered microbe that could enable simultaneous upgrading of all lignocellulose streams, which has the ultimate potential to reduce capital cost and enable new metabolic engineering strategies. Pseudomonas putida is a robust microorganism capable of natively catabolizing aromatics, organic acids, and D-glucose. We engineered this strain to utilize D-xylose by tuning expression of a heterologous D-xylose transporter, catabolic genes xylAB, and pentose phosphate pathway (PPP) genes tal-tkt. We further engineered L-arabinose utilization via the PPP or an oxidative pathway. This resulted in a growth rate on xylose and arabinose of 0.32 h -1 and 0.38 h -1 , respectively. Using the oxidative L-arabinose pathway with the PPP xylose pathway enabled D-glucose, D-xylose, and L-arabinose co-utilization in minimal medium using model compounds as well as real corn stover hydrolysate, with a maximum hydrolysate sugar consumption rate of 3.3 g/L/h. After modifying catabolite repression, our engineered P. putida simultaneously co-utilized five representative compounds from cellulose (D-glucose), hemicellulose (D-xylose, L-arabinose, and acetic acid), and lignin-related compounds (p-coumarate), demonstrating the feasibility of simultaneously upgrading total lignocellulosic biomass to value-added chemicals., (Copyright © 2020 The Authors. Published by Elsevier Inc. All rights reserved.)

The development of Pseudomonas strains for industrial production of fuels and chemicals will require the integration of heterologous genes and pathways into the chromosome. Finding the most appropriate integration site to maximize strain performance is an essential part of the strain design process. We characterized seven chromosomal loci in Pseudomonas putida KT2440 for integration of a fluorescent protein expression construct. Insertion in five of the loci did not affect growth rate, but fluorescence varied by up to 27-fold. Three sites displaying a diversity of phenotypes with the fluorescent reporter were also chosen for the integration of a gene encoding a muconate importer. Depending on the integration locus, expression of the importer varied by approximately 3-fold and produced significant phenotypic differences. This work demonstrates the impact of the integration location on host viability, gene expression, and overall strain performance., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2020 The Authors.)

A microbe's ecological niche and biotechnological utility are determined by its specific set of co-evolved metabolic pathways. The acquisition of new pathways, through horizontal gene transfer or genetic engineering, can have unpredictable consequences. Here we show that two different pathways for coumarate catabolism failed to function when initially transferred into Escherichia coli. Using laboratory evolution, we elucidated the factors limiting activity of the newly acquired pathways and the modifications required to overcome these limitations. Both pathways required host mutations to enable effective growth with coumarate, but the necessary mutations differed. In one case, a pathway intermediate inhibited purine nucleotide biosynthesis, and this inhibition was relieved by single amino acid replacements in IMP dehydrogenase. A strain that natively contains this coumarate catabolism pathway, Acinetobacter baumannii, is resistant to inhibition by the relevant intermediate, suggesting that natural pathway transfers have faced and overcome similar challenges. Molecular dynamics simulation of the wild type and a representative single-residue mutant provide insight into the structural and dynamic changes that relieve inhibition. These results demonstrate how deleterious interactions can limit pathway transfer, that these interactions can be traced to specific molecular interactions between host and pathway, and how evolution or engineering can alleviate these limitations., (© 2019 John Wiley & Sons Ltd.)

Biosensors can be used to screen or select for small molecule production in engineered microbes. However, mutations to the biosensor that interfere with accurate signal transduction are common, producing an excess of false positives. Strategies have been developed to avoid this limitation by physically separating the production pathway and biosensor, but these approaches have only been applied to screens, not selections. We have developed a novel biosensor-mediated selection strategy using competition between cocultured bacteria. When applied to the biosynthesis of cis , cis -muconate, we show that this strategy yields a selective advantage to producer strains that outweighs the costs of production. By encapsulating the competitive cocultures into microfluidic droplets, we successfully enriched the muconate-producing strains from a large population of control nonproducers. Facile selections for small molecule production will increase testing throughput for engineered microbes and allow for the rapid optimization of novel metabolic pathways.

The sulfate-reducing, mercury-methylating strain ND132 T was isolated from the brackish anaerobic bottom sediments of Chesapeake Bay, USA. Capable of high levels of mercury (Hg) methylation, ND132 T has been widely used as a model strain to study the process and to determine the genetic basis of Hg methylation. Originally called Desulfovibrio desulfuricans ND132 T on the basis of an early partial 16S rRNA sequence, the strain has never been formally described. Phylogenetic and physiological traits place this strain within the genus Pseudodesulfovibrio, in the recently reclassified phylum Desulfobacterota (formerly Deltaproteobacteria ). ND132 T is most closely related to Pseudodesulfovibrio hydrargyri BerOc1 T and Pseudodesulfovibrio indicus J2 T . Analysis of average nucleotide identity (ANI) of whole-genome sequences showed roughly 88 % ANI between P. hydrargyri BerOc1 T and ND132 T , and 84 % similarity between ND132 T and P. indicus J2 T . These cut-off scores <95 %, along with a multi-gene phylogenetic analysis of members of the family Desulfovibrionacea, and differences in physiology indicate that all three strains represent separate species. The Gram-stain-negative cells are vibrio-shaped, motile and not sporulated. ND132 T is a salt-tolerant mesophile with optimal growth in the laboratory at 32 °C, 2 % salinity, and pH 7.8. The DNA G+C content of the genomic DNA is 65.2 %. It is an incomplete oxidizer of short chain fatty acids, using lactate, pyruvate and fumarate with sulfate or sulfite as the terminal electron acceptors. ND132 T can respire fumarate using pyruvate as an electron donor. The major fatty acids are iso-C 15 : 0 , anteiso-C 15 : 0 , iso-C 17 : 0 , iso-C 17 : 1 ω9 c and anteiso-C 17 : 0 . We propose the classification of strain ND132 T (DSM 110689, ATCC TSD-224) as the type strain Pseudodesulfovibrio mercurii sp. nov.

Woody perennial angiosperms (i.e., hardwood trees) are polyphyletic in origin and occur in most angiosperm orders. Despite their independent origins, hardwoods have shared physiological, anatomical, and life history traits distinct from their herbaceous relatives. New high-throughput DNA sequencing platforms have provided access to numerous woody plant genomes beyond the early reference genomes of Populus and Eucalyptus , references that now include willow and oak, with pecan and chestnut soon to follow. Genomic studies within these diverse and undomesticated species have successfully linked genes to ecological, physiological, and developmental traits directly. Moreover, comparative genomic approaches are providing insights into speciation events while large-scale DNA resequencing of native collections is identifying population-level genetic diversity responsible for variation in key woody plant biology across and within species. Current research is focused on developing genomic prediction models for breeding, defining speciation and local adaptation, detecting and characterizing somatic mutations, revealing the mechanisms of gender determination and flowering, and application of systems biology approaches to model complex regulatory networks underlying quantitative traits. Emerging technologies such as single-molecule, long-read sequencing is being employed as additional woody plant species, and genotypes within species, are sequenced, thus enabling a comparative ("evo-devo") approach to understanding the unique biology of large woody plants. Resource availability, current genomic and genetic applications, new discoveries and predicted future developments are illustrated and discussed for poplar, eucalyptus, willow, oak, chestnut, and pecan.

Transposon mutagenesis is a powerful technique in microbial genetics for the identification of genes in uncharacterized pathways. Recently, the throughput of transposon mutagenesis techniques has been dramatically increased through the combination of DNA barcoding and high-throughput sequencing. Here, we show that when applied to catabolic pathways, barcoded transposon libraries can be used to distinguish redundant pathways, decompose complex pathways into substituent modules, discriminate between enzyme homologs, and rapidly identify previously hypothetical enzymes in an unbiased genome-scale search. We used this technique to identify two genes, desC and desD , which are involved in the degradation of the lignin-derived aromatic compound sinapic acid in the nonmodel bacterium Novosphingobium aromaticivorans We show that DesC is a methyl esterase acting on an intermediate formed during sinapic acid catabolism, providing the last enzyme in a proposed catabolic pathway. This approach will be particularly useful in the identification of complete pathways suitable for heterologous expression in metabolic engineering. IMPORTANCE The identification of the genes involved in specific biochemical transformations is a key step in predicting microbial function from nucleic acid sequences and in engineering microbes to endow them with new functions. We have shown that new techniques for transposon mutagenesis can dramatically simplify this process and enable the rapid identification of genes in uncharacterized pathways. These techniques provide the necessary scale to fully elucidate complex biological networks such as those used to degrade mixtures of lignin-derived aromatic compounds., (Copyright © 2018 American Society for Microbiology.)

Metabolic pathway assembly typically involves the expression of enzymes from multiple organisms in a single heterologous host. Ensuring that each enzyme functions effectively can be challenging, since many potential factors can disrupt proper pathway flux. Here, we compared the performance of two enzyme homologs in a pathway engineered to allow Escherichia coli to grow on 4-hydroxybenzoate (4-HB), a byproduct of lignocellulosic biomass deconstruction. Single chromosomal copies of the 4-HB 3-monooxygenase genes pobA and praI , from Pseudomonas putida KT2440 and Paenibacillus sp. JJ-1B, respectively, were introduced into a strain able to metabolize protocatechuate (PCA), the oxidation product of 4-HB. Neither enzyme initially supported consistent growth on 4-HB. Experimental evolution was used to identify mutations that improved pathway activity. For both enzymes, silent mRNA mutations were identified that increased enzyme expression. With pobA , duplication of the genes for PCA metabolism allowed growth on 4-HB. However, with praI , growth required a mutation in the 4-HB/PCA transporter pcaK that increased intracellular concentrations of 4-HB, suggesting that flux through PraI was limiting. These findings demonstrate the value of directed evolution strategies to rapidly identify and overcome diverse factors limiting enzyme activity.

The production of biofuels from lignocellulose yields a substantial lignin by-product stream that currently has few applications. Biological conversion of lignin-derived compounds into chemicals and fuels has the potential to improve the economics of lignocellulose-derived biofuels, but few microbes are able both to catabolize lignin-derived aromatic compounds and to generate valuable products. While Escherichia coli has been engineered to produce a variety of fuels and chemicals, it is incapable of catabolizing most aromatic compounds. Therefore, we engineered E. coli to catabolize protocatechuate, a common intermediate in lignin degradation, as the sole source of carbon and energy via heterologous expression of a nine-gene pathway from Pseudomonas putida KT2440. We next used experimental evolution to select for mutations that increased growth with protocatechuate more than 2-fold. Increasing the strength of a single ribosome binding site in the heterologous pathway was sufficient to recapitulate the increased growth. After optimization of the core pathway, we extended the pathway to enable catabolism of a second model compound, 4-hydroxybenzoate. These engineered strains will be useful platforms to discover, characterize, and optimize pathways for conversions of lignin-derived aromatics. IMPORTANCE Lignin is a challenging substrate for microbial catabolism due to its polymeric and heterogeneous chemical structure. Therefore, engineering microbes for improved catabolism of lignin-derived aromatic compounds will require the assembly of an entire network of catabolic reactions, including pathways from genetically intractable strains. Constructing defined pathways for aromatic compound degradation in a model host would allow rapid identification, characterization, and optimization of novel pathways. We constructed and optimized one such pathway in E. coli to enable catabolism of a model aromatic compound, protocatechuate, and then extended the pathway to a related compound, 4-hydroxybenzoate. This optimized strain can now be used as the basis for the characterization of novel pathways., (Copyright © 2017 American Society for Microbiology.)

Chloromethane (CM) is an ozone-depleting gas, produced predominantly from natural sources, that provides an important carbon source for microbes capable of consuming it. CM catabolism has been difficult to study owing to the challenging genetics of its native microbial hosts. Since the pathways for CM catabolism show evidence of horizontal gene transfer, we reproduced this transfer process in the laboratory to generate new CM-catabolizing strains in tractable hosts. We demonstrate that six putative accessory genes improve CM catabolism, though heterologous expression of only one of the six is strictly necessary for growth on CM. In contrast to growth of Methylobacterium strains with the closely related compound dichloromethane (DCM), we find that chloride export does not limit growth on CM and, in general that the ability of a strain to grow on DCM is uncorrelated with its ability to grow on CM. This heterologous expression system allows us to investigate the components required for effective CM catabolism and the factors that limit effective catabolism after horizontal transfer.

How do bacteria regulate their cellular physiology in response to starvation? Here, we present a detailed characterization of Escherichia coli growth and starvation over a time-course lasting two weeks. We have measured multiple cellular components, including RNA and proteins at deep genomic coverage, as well as lipid modifications and flux through central metabolism. Our study focuses on the physiological response of E. coli in stationary phase as a result of being starved for glucose, not on the genetic adaptation of E. coli to utilize alternative nutrients. In our analysis, we have taken advantage of the temporal correlations within and among RNA and protein abundances to identify systematic trends in gene regulation. Specifically, we have developed a general computational strategy for classifying expression-profile time courses into distinct categories in an unbiased manner. We have also developed, from dynamic models of gene expression, a framework to characterize protein degradation patterns based on the observed temporal relationships between mRNA and protein abundances. By comparing and contrasting our transcriptomic and proteomic data, we have identified several broad physiological trends in the E. coli starvation response. Strikingly, mRNAs are widely down-regulated in response to glucose starvation, presumably as a strategy for reducing new protein synthesis. By contrast, protein abundances display more varied responses. The abundances of many proteins involved in energy-intensive processes mirror the corresponding mRNA profiles while proteins involved in nutrient metabolism remain abundant even though their corresponding mRNAs are down-regulated.

When microbes acquire new abilities through horizontal gene transfer, the genes and pathways must function under conditions with which they did not coevolve. If newly-acquired genes burden the host, their utility will depend on further evolutionary refinement of the recombinant strain. We used laboratory evolution to recapitulate this process of transfer and refinement, demonstrating that effective use of an introduced dichloromethane degradation pathway required one of several mutations to the bacterial host that are predicted to increase chloride efflux. We then used this knowledge to identify parallel, beneficial mutations that independently evolved in two natural dichloromethane-degrading strains. Finally, we constructed a synthetic mobile genetic element carrying both the degradation pathway and a chloride exporter, which preempted the adaptive process and directly enabled effective dichloromethane degradation across diverse Methylobacterium environmental isolates. Our results demonstrate the importance of post-transfer refinement in horizontal gene transfer, with potential applications in bioremediation and synthetic biology.

Horizontal gene transfer plays a crucial role in microbial evolution. While much is known about the mechanisms that determine whether physical DNA can be transferred into a new host, the factors determining the utility of the transferred genes are less clear. We have explored this issue using dichloromethane consumption in Methylobacterium strains. Methylobacterium extorquens DM4 expresses a dichloromethane dehalogenase (DcmA) that has been acquired through horizontal gene transfer and allows the strain to grow on dichloromethane as the sole carbon and energy source. We transferred the dcmA gene into six Methylobacterium strains that include both close and distant evolutionary relatives. The transconjugants varied in their ability to grow on dichloromethane, but their fitness on dichloromethane did not correlate with the phylogeny of the parental strains or with any single tested physiological factor. This work highlights an important limiting factor in horizontal gene transfer, namely, the capacity of the recipient strain to accommodate the stress and metabolic disruption resulting from the acquisition of a new enzyme or pathway. Understanding these limitations may help to rationalize historical examples of horizontal transfer and aid deliberate genetic transfers in biotechnology for metabolic engineering.

Directed evolution is a powerful technique for increasing the activity of poorly active enzymes, for example when an enzyme is engineered to accept a new substrate or function in a new environment. Since enzyme activity greatly depends on the enzyme environment, screening should be performed under the same conditions as the ultimate application of the enzyme. When an enzyme will be used in live cells, RNA biosensors offer a powerful and flexible method of linking the desired phenotype, production of a small molecule of interest, to an easily measured phenotype, such as fluorescence. Here, we describe methods for screening enzyme libraries using an RNA biosensor, showing examples from the evolution of a P450 monooxygenase.

Recent advances in metabolic engineering have demonstrated that microbial biosynthesis can provide a viable alternative to chemical synthesis for the production of bulk and fine chemicals. Introduction of a new biosynthetic pathway typically requires the expression of multiple heterologous enzymes in the production host, which can impose stress on the host cell and, thereby, limit performance of the pathway. Unfortunately, analysis and treatment of the host stress response can be difficult, because there are many sources of stress that may interact in complex ways. We use a systems biological approach to analyze the stress imposed by expressing different enzyme variants from a lineage of soluble P450 monooxygenases, previously evolved for heterologous activity in Saccharomyces cerevisiae. Our analysis identifies patterns of stress imposed on the host by heterologous enzyme overexpression that are consistent across the evolutionary lineage, ultimately implicating heme depletion as the major stress. We show that the monooxygenase evolution, starting from conditions of either high or low stress, caused the cellular stress to converge to a common level. Overexpression of rate-limiting enzymes in the endogenous heme biosynthetic pathway alleviates the stress imposed by expression of the P450 monooxygenases and increases the enzymatic activity of the final evolved P450 by an additional 2.3-fold. Heme overexpression also increases the total activity of an endogenous cytosolic heme-containing catalase but not a heterologous P450 that is membrane-associated. This work demonstrates the utility of combining systems and synthetic biology to analyze and optimize heterologous enzyme expression.

Metabolic engineering can produce a wide range of bulk and fine chemicals using renewable resources. These approaches frequently require high levels of activity from multiple heterologous enzymes. Directed evolution techniques have been used to improve the activity of a wide range of enzymes but can be difficult to apply when the enzyme is used in whole cells. To address this limitation, we developed generalizable in vivo biosensors using engineered RNA switches to link metabolite concentrations and GFP expression levels in living cells. Using such a sensor, we quantitatively screened large enzyme libraries in high throughput based on fluorescence, either in clonal cultures or in single cells by fluorescence activated cell sorting (FACS). By iteratively screening libraries of a caffeine demethylase, we identified beneficial mutations that ultimately increased the enzyme activity in vivo by 33 fold and the product selectivity by 22 fold. As aptamer selection strategies allow RNA switches to be readily adapted to recognize new small molecules, these RNA-based screening techniques are applicable to a broad range of enzymes and metabolic pathways., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Cells are filled with biosensors, molecular systems that measure the state of the cell and respond by regulating host processes. In much the same way that an engineer would monitor a chemical reactor, the cell uses these sensors to monitor changing intracellular environments and produce consistent behavior despite the variable environment. While natural systems derive a clear benefit from pathway regulation, past research efforts in engineering cellular metabolism have focused on introducing new pathways and removing existing pathway regulation. Synthetic biology is a rapidly growing field that focuses on the development of new tools that support the design, construction, and optimization of biological systems. Recent advances have been made in the design of genetically-encoded biosensors and the application of this class of molecular tools for optimizing and regulating heterologous pathways. Biosensors to cellular metabolites can be taken directly from natural systems, engineered from natural sensors, or constructed entirely in vitro. When linked to reporters, such as antibiotic resistance markers, these metabolite sensors can be used to report on pathway productivity, allowing high-throughput screening for pathway optimization. Future directions will focus on the application of biosensors to introduce feedback control into metabolic pathways, providing dynamic control strategies to increase the efficient use of cellular resources and pathway reliability., (Copyright © 2011 Elsevier Inc. All rights reserved.)