Search

The automatic monitoring of activities in construction sites through the proper use of acoustic signals is a recent field of research that is currently in continuous evolution. In particular, the use of techniques based on Convolutional Neural Networks (CNNs) working on the spectrogram of the signal or its mel-scale variants was demonstrated to be quite successful. Nevertheless, the spectrogram has some limitations, which are due to the intrinsic trade-off between temporal and spectral resolutions. In order to overcome these limitations, in this paper, we propose employing the scalogramas a proper time–frequency representation of the audio signal. The scalogram is defined as the square modulus of the Continuous Wavelet Transform (CWT) and is known as a powerful tool for analyzing real-world signals. Experimental results, obtained on real-world sounds recorded in construction sites, have demonstrated the effectiveness of the proposed approach, which is able to clearly outperform most state-of-the-art solutions.

Fog Computing (FC) and Conditional Deep Neural Networks (CDDNs) with early exits are two emerging paradigms which, up to now, are evolving in a standing-alone fashion. However, their integration is expected to be valuable in IoT applications in which resource-poor devices must mine large volume of sensed data in real-time. Motivated by this consideration, this article focuses on the optimized design and performance validation of Learning-in-the-Fog (LiFo), a novel virtualized technological platform for the minimum-energy and delay-constrained execution of the inference-phase of CDDNs with early exits atop multi-tier networked computing infrastructures composed by multiple hierarchically-organized wireless Fog nodes. The main research contributions of this article are threefold, namely: (i) we design the main building blocks and supporting services of the LiFo architecture by explicitly accounting for the multiple constraints on the per-exit maximum inference delays of the supported CDNN; (ii) we develop an adaptive algorithm for the minimum-energy distributed joint allocation and reconfiguration of the available computing-plus-networking resources of the LiFo platform. Interestingly enough, the designed algorithm is capable to self-detect (typically, unpredictable) environmental changes and quickly self-react them by properly re-configuring the available computing and networking resources; and, (iii) we design the main building blocks and related virtualized functionalities of an Information Centric-based networking architecture, which enables the LiFo platform to perform the aggregation of spatially-distributed IoT sensed data. The energy-vs.-inference delay LiFo performance is numerically tested under a number of IoT scenarios and compared against the corresponding ones of some state-of-the-art benchmark solutions that do not rely on the Fog support.

The emerging 5G paradigm will enable multi-radio smartphones to run high-rate stream applications. However, since current smartphones remain resource and battery-limited, the 5G era opens new challenges on how to actually support these applications. In principle, the service orchestration capability of the Fog and Cloud Computing paradigms could be an effective means of dynamically providing resource-augmentation to smartphones. Motivated by these considerations, the peculiar focus of this paper is on the joint and adaptive optimization of the resource and task allocations of mobile stream applications in 5G-supported multi-tier Mobile-Fog-Cloud virtualized ecosystems. The objective is the minimization of the computing-plus-network energy of the overall ecosystem under hard constraints on the minimum streaming rate and the maximum computing-plus-networking resources. To this end: 1) we model the target ecosystem energy by explicitly accounting for the virtualized and multi-core nature of the Fog/Cloud servers; 2) since the resulting problem is non-convex and involves both continuous and discrete variables, we develop an optimality-preserving decomposition into the cascade of a (continuous) resource allocation sub-problem and a (discrete) task-allocation sub-problem; and 3) we numerically solve the first sub-problem through a suitably designed set of gradient-based adaptive iterations, while we approach the solution of the second sub-problem by resorting to an ad-hoc-developed elitary Genetic algorithm. Finally, we design the main blocks of EcoMobiFog, a technological virtualized platform for supporting the developed solver. The extensive numerical tests confirm that the energy-delay performance of the proposed solving framework is typically within a few per-cent the benchmark one of the exhaustive search-based solution.

The incoming era of the fifth-generation fog computing-supported radio access networks (shortly, 5G FOGRANs) aims at exploiting computing/networking resource virtualization, in order to augment the limited resources of wireless devices through the seamless live migration of virtual machines (VMs) toward nearby fog data centers. For this purpose, the bandwidths of the multiple wireless network interface cards of the wireless devices may be aggregated under the control of the emerging MultiPathTCP (MPTCP) protocol. However, due to the fading and mobility-induced phenomena, the energy consumptions of the current state-of-the-art VM migration techniques may still offset their expected benefits. Motivated by these considerations, in this paper, we analytically characterize and implement in software and numerically test the optimal minimum-energy settable-complexity bandwidth manager (SCBM) for the live migration of VMs over 5G FOGRAN MPTCP connections. The key features of the proposed SCBM are that: 1) its implementation complexity is settable on-line on the basis of the target energy consumption versus implementation complexity tradeoff; 2) it minimizes the network energy consumed by the wireless device for sustaining the migration process under hard constraints on the tolerated migration times and downtimes; and 3) by leveraging a suitably designed adaptive mechanism, it is capable to quickly react to (possibly, unpredicted) fading and/or mobility-induced abrupt changes of the wireless environment without requiring forecasting. The actual effectiveness of the proposed SCBM is supported by extensive energy versus delay performance comparisons that cover: 1) a number of heterogeneous 3G/4G/WiFi FOGRAN scenarios; 2) synthetic and real-world workloads; and, 3) MPTCP and wireless connections..

The global COVID-19 pandemic certainly has posed one of the more difficult challenges for researchers in the current century. The development of an automatic diagnostic tool, able to detect the disease in its early stage, could undoubtedly offer a great advantage to the battle against the pandemic. In this regard, most of the research efforts have been focused on the application of Deep Learning (DL) techniques to chest images, including traditional chest X-rays (CXRs) and Computed Tomography (CT) scans. Although these approaches have demonstrated their effectiveness in detecting the COVID-19 disease, they are of huge computational complexity and require large datasets for training. In addition, there may not exist a large amount of COVID-19 CXRs and CT scans available to researchers. To this end, in this paper, we propose an approach based on the evaluation of the histogram from a common class of images that is considered as the target. A suitable inter-histogram distance measures how this target histogram is far from the histogram evaluated on a test image: if this distance is greater than a threshold, the test image is labeled as anomaly, i.e., the scan belongs to a patient affected by COVID-19 disease. Extensive experimental results and comparisons with some benchmark state-of-the-art methods support the effectiveness of the developed approach, as well as demonstrate that, at least when the images of the considered datasets are homogeneous enough (i.e., a few outliers are present), it is not really needed to resort to complex-to-implement DL techniques, in order to attain an effective detection of the COVID-19 disease. Despite the simplicity of the proposed approach, all the considered metrics (i.e., accuracy, precision, recall, and F-measure) attain a value of 1.0 under the selected datasets, a result comparable to the corresponding state-of-the-art DNN approaches, but with a remarkable computational simplicity.

Fog computing (FC) and Internet of Everything (IoE) are two emerging technological paradigms that, to date, have been considered standing-alone. However, because of their complementary features, we expect that their integration can foster a number of computing and network-intensive pervasive applications under the incoming realm of the future Internet. Motivated by this consideration, the goal of this position paper is fivefold. First, we review the technological attributes and platforms proposed in the current literature for the standing-alone FC and IoE paradigms. Second, by leveraging some use cases as illustrative examples, we point out that the integration of the FC and IoE paradigms may give rise to opportunities for new applications in the realms of the IoE, Smart City, Industry 4.0, and Big Data Streaming, while introducing new open issues. Third, we propose a novel technological paradigm, the Fog of Everything (FoE) paradigm, that integrates FC and IoE and then we detail the main building blocks and services of the corresponding technological platform and protocol stack. Fourth, as a proof-of-concept, we present the simulated energy-delay performance of a small-scale FoE prototype, namely, the V-FoE prototype. Afterward, we compare the obtained performance with the corresponding one of a benchmark technological platform, e.g., the V-D2D one. It exploits only device-to-device links to establish inter-thing “ad hoc” communication. Last, we point out the position of the proposed FoE paradigm over a spectrum of seemingly related recent research projects.

The recent introduction of the so-called Conditional Neural Networks (CDNNs) with multiple early exits, executed atop virtualized multi-tier Fog platforms, makes feasible the real-time and energy-efficient execution of analytics required by future Internet applications. However, until now, toolkits for the evaluation of energy-vs.-delay performance of the inference phase of CDNNs executed on such platforms, have not been available. Motivated by these considerations, in this contribution, we present DeepFogSim. It is a MATLAB-supported software toolbox aiming at testing the performance of virtualized technological platforms for the real-time distributed execution of the inference phase of CDNNs with early exits under IoT realms. The main peculiar features of the proposed DeepFogSim toolbox are that: (i) it allows the joint dynamic energy-aware optimization of the Fog-hosted computing-networking resources under hard constraints on the tolerated inference delays; (ii) it allows the repeatable and customizable simulation of the resulting energy-delay performance of the overall Fog execution platform; (iii) it allows the dynamic tracking of the performed resource allocation under time-varying operating conditions and/or failure events; and (iv) it is equipped with a user-friendly Graphic User Interface (GUI) that supports a number of graphic formats for data rendering. Some numerical results give evidence for about the actual capabilities of the proposed DeepFogSim toolbox.

In parallel with the vast medical research on clinical treatment of COVID-19, an important action to have the disease completely under control is to carefully monitor the patients. What the detection of COVID-19 relies on most is the viral tests, however, the study of X-rays is helpful due to the ease of availability. There are various studies that employ Deep Learning (DL) paradigms, aiming at reinforcing the radiography-based recognition of lung infection by COVID-19. In this regard, we make a comparison of the noteworthy approaches devoted to the binary classification of infected images by using DL techniques, then we also propose a variant of a convolutional neural network (CNN) with optimized parameters, which performs very well on a recent dataset of COVID-19. The proposed model’s effectiveness is demonstrated to be of considerable importance due to its uncomplicated design, in contrast to other presented models. In our approach, we randomly put several images of the utilized dataset aside as a hold out set; the model detects most of the COVID-19 X-rays correctly, with an excellent overall accuracy of 99.8%. In addition, the significance of the results obtained by testing different datasets of diverse characteristics (which, more specifically, are not used in the training process) demonstrates the effectiveness of the proposed approach in terms of an accuracy up to 93%.

In this paper, we characterize the main building blocks and numerically verify the classification accuracy and energy performance of SmartFog, a distributed and virtualized networked Fog technological platform for the support for Stacked Denoising Auto-Encoder (SDAE)-based anomaly detection in data flows generated by Smart-Meters (SMs). In SmartFog, the various layers of an SDAE are pretrained at different Fog nodes, in order to distribute the overall computational efforts and, then, save energy. For this purpose, a new Adaptive Elitist Genetic Algorithm (AEGA) is “ad hoc” designed to find the optimized allocation of the SDAE layers to the Fog nodes. Interestingly, the proposed AEGA implements a (novel) mechanism that adaptively tunes the exploration and exploitation capabilities of the AEGA, in order to quickly escape the attraction basins of local minima of the underlying energy objective function and, then, speed up the convergence towards global minima. As a matter of fact, the main distinguishing feature of the resulting SmartFog paradigm is that it accomplishes the joint integration on a distributed Fog computing platform of the anomaly detection functionality and the minimization of the resulting energy consumption. The reported numerical tests support the effectiveness of the designed technological platform and point out that the attained performance improvements over some state-of-the-art competing solutions are around 5%, 68% and 30% in terms of detection accuracy, execution time and energy consumption, respectively.

It is expected that the pervasive deployment of multi-tier 5G-supported Mobile-Fog-Cloudtechnological computing platforms will constitute an effective means to support the real-time execution of future Internet applications by resource- and energy-limited mobile devices. Increasing interest in this emerging networking-computing technology demands the optimization and performance evaluation of several parts of the underlying infrastructures. However, field trials are challenging due to their operational costs, and in every case, the obtained results could be difficult to repeat and customize. These emerging Mobile-Fog-Cloud ecosystems still lack, indeed, customizable software tools for the performance simulation of their computing-networking building blocks. Motivated by these considerations, in this contribution, we present VirtFogSim. It is a MATLAB-supported software toolbox that allows the dynamic joint optimization and tracking of the energy and delay performance of Mobile-Fog-Cloud systems for the execution of applications described by general Directed Application Graphs (DAGs). In a nutshell, the main peculiar features of the proposed VirtFogSim toolbox are that: (i) it allows the joint dynamic energy-aware optimization of the placement of the application tasks and the allocation of the needed computing-networking resources under hard constraints on acceptable overall execution times; (ii) it allows the repeatable and customizable simulation of the resulting energy-delay performance of the overall system; (iii) it allows the dynamic tracking of the performed resource allocation under time-varying operational environments, as those typically featuring mobile applications; (iv) it is equipped with a user-friendly Graphic User Interface (GUI) that supports a number of graphic formats for data rendering; and (v) its MATLAB code is optimized for running atop multi-core parallel execution platforms. To check both the actual optimization and scalability capabilities of the VirtFogSim toolbox, a number of experimental setups featuring different use cases and operational environments are simulated, and their performances are compared.

The combination of adaptive filters is an effective approach to improve filtering performance. In this paper, we investigate the performance of an adaptive combined scheme between two adaptive multiple-input single-output (MISO) filters, which can be easily extended to the case of multiple outputs. In order to generalize the analysis, we consider the multichannel affine projection algorithm (APA) to update the coefficients of the MISO filters, which increases the possibility of exploiting the capabilities of the filtering scheme. Using energy conservation relations, we derive a theoretical behavior of the proposed adaptive combination scheme at steady state. Such analysis entails some further theoretical insights with respect to the single channel combination scheme. Simulation results prove both the validity of the theoretical steady-state analysis and the effectiveness of the proposed combined scheme.