Search

Ion computed tomography (iCT) is an imaging modality for the direct determination of the relative stopping power (RSP) distribution within a patient's body. Usually, this is done by estimating the path and energy loss of ions traversing the scanned volume via a tracking system and a separate residual energy detector. This study, on the other hand, introduces the first experimental study of a novel iCT approach based on time-of-flight (TOF) measurements, the so-called Sandwich TOF-iCT concept, which in contrast to any other iCT system, does not require a residual energy detector for the RSP determination. A small TOF-iCT demonstrator was built based on low gain avalanche diodes (LGAD), which are 4D-tracking detectors that allow to simultaneously measure the particle position and time-of-arrival with a precision better than 100um and 100ps, respectively. Using this demonstrator, the material and energy-dependent TOF was measured for several homogeneous PMMA slabs in order to calibrate the acquired TOF against the corresponding water equivalent thickness (WET). With this calibration, two proton radiographs (pRad) of a small aluminium stair phantom were recorded at MedAustron using 83 and 100.4MeV protons. Due to the simplified WET calibration models used in this very first experimental study of this novel approach, the difference between the measured and theoretical WET ranged between 37.09 and 51.12%. Nevertheless, the first TOF-based pRad was successfully recorded showing that LGADs are suitable detector candidates for TOF-iCT. While the system parameters and WET estimation algorithms require further optimization, this work was an important first step to realize Sandwich TOF-iCT. Due to its compact and cost-efficient design, Sandwich TOF-iCT has the potential to make iCT more feasible and attractive for clinical application, which, eventually, could enhance the treatment planning quality., Comment: Preprint submitted to Physics in Medicine and Biology. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it

We present first results from a Positron Emission Tomography (PET) scanner demonstrator based on Resistive Plate Chambers and specialized for brain imaging. The device features a 30 cm wide cubic field-of-view and each detector comprises 40 gas gaps with 3D location of the interaction point of the photon. Besides other imagery, we show that the reconstructed image resolution, as evaluated by a hot-rod phantom, is sub-millimetric, which is beyond the state-of-the-art of the standard PET technology for this application.

The STRings for Absorption length in Water (STRAW) are the first in a series of pathfinders for the Pacific Ocean Neutrino Experiment (P-ONE), a future large-scale neutrino telescope in the north-eastern Pacific Ocean. STRAW consists of two 150 m long mooring lines instrumented with optical emitters and detectors. The pathfinder is designed to measure the attenuation length of the water and perform a long-term assessment of the optical background at the future P-ONE site. After two years of continuous operation, measurements from STRAW show an optical attenuation length of about 28 metres at 450 nm. Additionally, the data allow a study of the ambient undersea background. The overall optical environment reported here is comparable to other deep-water neutrino telescopes and qualifies the site for the deployment of P-ONE., Comment: 11 pages, 13 figures

Operating HADES at the future FAIR SIS-100 accelerator challenges the rate capability of DAQ and electronics. A new, more robust version of front-end electronics needs to be built for the HADES drift chamber system. Due to the unavailability of the previously used ASD-8 analog read-out ASIC, PASTTREC (PANDA straw tube read-out ASIC) was tested as an ASD-8 replacement in different scenarios including a beam test. PASTTREC falls 20% short of the ASD-8 time precision but performs better w.r.t. signal charge measurements and overall operation stability. The measured time precision as a function of distance to the sense wire was modeled within a 3D GARFIELD simulation of the HADES drift cell., Comment: Proceedings of the PM2018 conference: 14th Pisa Meeting on Advanced Detectors, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment (2018)

The Compressed Baryonic Matter Experiment (CBM) is one of the core experiments of the future FAIR facility (Darmstadt/Germany). The fixed-target experiment will explore the phase diagram of strongly interacting matter in the regime of high net baryon densities with numerous rare probes. The Micro Vertex Detector (MVD) will determine the secondary decay vertex of open charm particles with $\sim 50~\rm \mu m$ precision, contribute to the background rejection in dielectron spectroscopy, and help to reconstruct neutral decay products of strange particles by means of missing mass identification. The MVD comprises four stations with 0.3 and $0.5\%~x/X_0$, which are placed between $5$ and $20~\rm cm$ downstream the target and inside vacuum. It will host highly-granular, next-generation Monolithic Active Pixel Sensors, with a spatial precision of $5\rm~\mu m$, a time resolution of $5 ~\rm \mu s$, and a peak rate capability of $\sim 700~\rm kHz/mm^2$. Moreover, a tolerance to $3\cdot10^{13}~\rm n_{eq}/cm^{2}$ and $\gtrsim 3~\rm Mrad$ are required. In this document, we summarize the status of sensor development, station prototyping, and the detector slow control., Comment: Proceedings of the PM2018 conference: 14th Pisa Meeting on Advanced Detectors, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment (2018)