Search

This study presents antibiofilm coating formulations based on Pickering emulsion templating. The coating contains no bioactive material because its antibiofilm properties stem from passive mechanisms that derive solely from the superhydrophobic nature of the coating. Moreover, unlike most of the superhydrophobic formulations, our system is fluorine-free, thus making the method eminently suitable for food and medical applications. The coating formulation is based on water in toluene or xylene emulsions that are stabilized using commercial hydrophobic silica, with polydimethylsiloxane (PDMS) dissolved in toluene or xylene. The structure of the emulsions and their stability was characterized by confocal microscopy and cryogenic-scanning electron microscopy (cryo-SEM). The most stable emulsions are applied on polypropylene (PP) surfaces and dried in an oven to form PDMS/silica coatings in a process called emulsion templating. The structure of the resulting coatings was investigated by atomic force microscopy (AFM) and SEM. The surface of the coatings shows a honeycomb-like structure that exhibits a combination of micron-scale and nanoscale roughness, which endows it with its superhydrophobic properties. After tuning, the superhydrophobic properties of the coatings demonstrated highly efficient passive antibiofilm activity. In vitro antibiofilm trials with E. coli indicate that the coatings reduced the biofilm accumulation by 83% in the xylene-water-based surfaces and by 59% in the case of toluene-water-based surfaces.

Considering the global spread of bacterial infections, the development of anti-biofilm surfaces with high antimicrobial activities is highly desired. This work unraveled a simple, sonochemical method for coating Cu

Multidrug antimicrobial resistance is a constantly growing health care issue associated with increased mortality and morbidity, and huge financial burden. Bacteria frequently form biofilm communities responsible for numerous persistent infections resistant to conventional antibiotics. Herein, novel nanoparticles (NPs) loaded with the natural bactericide farnesol (FSL NPs) are generated using high-intensity ultrasound. The nanoformulation of farnesol improved its antibacterial properties and demonstrated complete eradication of

Currently, the technologies accompanying the usage of waste materials for the fabrication of innovative useful materials have been significantly advanced. For the same purpose, a possible sustainab...

A polydopamine (PDA) composite was synthesized by depositing Zn-doped CuO (Zn@CuO) particles on polydopamine by one-step ultrasonication. XPS, XRD, and FTIR confirmed the formation of spherical Zn@...

Multidrug antimicrobial resistance is a constantly growing health care issue associated with increased mortality and morbidity, and huge financial burden. Bacteria frequently form biofilm communities responsible for numerous persistent infections resistant to conventional antibiotics. Herein, novel nanoparticles (NPs) loaded with the natural bactericide farnesol (FSL NPs) are generated using high-intensity ultrasound. The nanoformulation of farnesol improved its antibacterial properties and demonstrated complete eradication of Staphylococcus aureus within less than 3 h, without inducing resistance development, and was able to 100% inhibit the establishment of a drug-resistant S. aureus biofilm. These antibiotic-free nano-antimicrobials also reduced the mature biofilm at a very low concentration of the active agent. In addition to the outstanding antibacterial properties, the engineered nano-entities demonstrated strong antiviral properties and inhibited the spike proteins of SARS-CoV-2 by up to 83%. The novel FSL NPs did not cause skin tissue irritation and did not induce the secretion of anti-inflammatory cytokines in a 3D skin tissue model. These results support the potential of these bio-based nano-actives to replace the existing antibiotics and they may be used for the development of topical pharmaceutic products for controlling microbial skin infections, without inducing resistance development.

Photodynamic therapy (PDT) and photothermal therapy (PTT) are promising therapeutic methods for cancer treatment; however, as single modality therapies, either PDT or PTT are still limited in their success rate. A dual application of both PDT and PTT, in a combined protocol, has gained immense interest. In this study, gold nanoparticles (AuNPs) are conjugated with a PDT agent, meso-tetrahydroxyphenylchlorin (mTHPC) photosensitizer, designed as nanotherapeutic agents that can activate a dual photodynamic/photothermal therapy.The AuNP-mTHPC complex is biocompatible, soluable, and photostable. PDT efficiency is high because of immediate reactive oxygen species (ROS) production upon mTHPC activation by the 650 nm laser which decreased mitochondrial membrane potential (ΔΨm). Likewise, the AuNP-mTHPC complex is used as a photoabsorbing (PTA) agent for PTT, due to efficient plasmon absorption and excellent photothermal conversion characteristics of AuNPs under laser irradiation at 532 nm. Under the laser irradiation of a PDT/PTT combination, a twofold phototoxicity outcome follows, compared to PDT-only or PTT-only treatment. This indicates that PDT and PTT have synergistic effects together as a combined therapeutic method. Hence, applying our AuNP-mTHPC may be a potential treatment of cancer in the biomedical field.Abstract Figure

Quercetin-chitosan (QCS) polysaccharide was synthesized via non-radical reaction using L-valine-quercetin as the precursor. QCS was systematically characterized and demonstrated amphiphilic properties with self-assembling ability. In-vitro activity studies confirmed that quercetin grafting does not diminish but rather increases antimicrobial activity of the original chitosan (CS) and provided the modified polysaccharide with antioxidative properties. QCS applied as a coating on fresh-cut fruit reduced microbial spoilage and oxidative browning of coated melon and apple, respectively. Notably, QCS-based coatings prevented moisture loss, a major problem with fresh produce (2%, 12% and 18% moisture loss for the QCS-coated, CS-coated and uncoated fruit, respectively). The prepared QCS polysaccharide provides advanced bioactivity and does not involve radical reactions during its synthesis, therefore, it has good potential for use as a nature-sourced biocompatible active material for foods and other safety-sensitive applications.

Sustainable antibacterial–antioxidant films were prepared using in situ graftings of silica nanoparticle (SNP) precursors with covalently attached bioactive agents benzoic acid (ba) or curcumin (cur) on polyvinyl alcohol (PVA). The modified PVA-SNP, PVA-SNP-ba and PVA-SNP-cur films were characterized using spectroscopic, physicochemical and microscopic methods. The prepared films showed excellent antibacterial and antioxidant activity, and increased hydrophobicity providing protection from undesired moisture. The PVA-SNP-ba films completely prevented the growth of the foodborne human pathogen Listeria innocua, whereas PVA-SNP-cur resulted in a 2.5 log reduction of this bacteria. The PVA-SNP-cur and PVA-SNP-ba films showed high antioxidant activity of 15.9 and 14.7 Mm/g TEAC, respectively. The described approach can serve as a generic platform for the formation of PVA-based packaging materials with tailor-made activity tuned by active substituents on silica precursors. Application of such biodegradable films bearing safe bioactive agents can be particularly valuable for advanced sustainable packaging materials in food and medicine.

Bacterial resistance to antibiotics is a major challenge in health research. A recent approach to combat this resistance is by interfering with vital bacterial functional systems. Calcium ions play an important role in bacterial functions such as bacterial cell stability, regulation of virulence genes, and in the function of various intracellular proteins. Bisphosphonate compounds have a high affinity for calcium ions and the antibacterial activity of bisphosphonates in combination with antibiotics has been recently studied. However, the antibacterial behavior of the bisphosphonate group itself has hardly been investigated. New cross-linked poly(styryl bisphosphonate) nanoparticles (poly(StBP) NPs) with a narrow size distribution and high yield were engineered using a dispersion copolymerization of styryl bisphosphonate monomer with the cross-linking monomer triethylene glycol diacrylate and the primary amino monomer N-(3-aminopropyl) methacrylamide hydrochloride. The diameter and size distribution were controlled by changing various polymerization parameters. Fluorescent poly(StBP) NPs were prepared by covalent binding of the primary amino groups on the poly(StBP) NPs surface to the dye BODIPY-FL-NHS ester; these NPs demonstrated a strong affinity for calcium ions. Antibacterial properties of optimal poly(StBP) NPs were studied compared to control NPs, which contain a methoxy group instead the bisphosphonate functional group. Unlike the control NPs, the poly(StBP) NPs demonstrated a significant antibacterial activity for both Gram negative (Escherichia coli and Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus and Bacillius subtilis) bacteria.

Although indwelling catheters are increasingly used in modern medicine, they can be a source of microbial contamination and hard-to-treat biofilms, which jeopardize patient lives. At times 70% ethanol is used as a catheter-lock solution due to its bactericidal properties. However, high concentrations of ethanol can result in adverse effects and in malfunction of the catheters.To determine whether low concentrations of ethanol can prevent and treat biofilms of Pseudomonas aeruginosa.Ethanol was tested at a concentration range of 0.625-80% against laboratory and clinical isolates of P. aeruginosa for various time periods (2-48 hours). The following parameters were evaluated following ethanol exposure: prevention of biofilm formation, reduction of biofilm metabolic activity, and inhibition of biofilm regrowth.Exposing P. aeruginosa to twofold ethanol gradients demonstrated a significant biofilm inhibition at concentrations as low as 2.5%. Treating pre-formed biofilms of P. aeruginosa with 20% ethanol for 4 hours caused a sharp decay in the metabolic activity of both the laboratory and clinical P. aeruginosa isolates. In addition, treating mature biofilms with 20% ethanol prevented the regrowth of bacteria encased within it.Low ethanol concentrations (2.5%) can prevent in vitro biofilm formation of P. aeruginosa. Treatment of previously formed biofilms can be achieved using 20% ethanol, thereby keeping the catheters intact and avoiding complications that can result from high ethanol concentrations.

The increase in antibiotic resistance reported worldwide poses an immediate threat to human health and highlights the need to find novel approaches to inhibit bacterial growth. In this study, we present a series of gold nanoparticles (Au NPs) capped by different N-heterocyclic molecules (N_Au NPs) which can serve as broad-spectrum antibacterial agents. Neither the Au NPs nor N-heterocyclic molecules were toxic to mammalian cells. These N_Au NPs can attach to the surface of bacteria and destroy the bacterial cell wall to induce cell death. Sonochemistry was used to coat Au NPs on the surface of fabrics, which showed superb antimicrobial activity against multi-drug resistant (MDR) bacteria as well as excellent efficacy in inhibiting bacterial biofilms produced by MDR bacteria. Our study provides a novel strategy for preventing the formation of MDR bacterial biofilms in a straightforward, low-cost, and efficient way, which holds promise for broad clinical applications.

In recent years, many bacteria have developed resistance to commonly used antibiotics. It is well-known that calcium is essential for bacterial function and cell wall stability. Bisphosphonates (BPs) have high affinity to calcium ions and are effective calcium chelators. Therefore, BPs could potentially be used as antibacterial agents. This article provides a detailed description regarding the synthesis of a unique BP vinylic monomer MA-Glu-BP (methacrylate glutamate bisphosphonate) and polyMA-Glu-BP nanoparticles (NPs) for antibacterial applications. polyMA-Glu-BP NPs were synthesized by dispersion copolymerization of the MA-Glu-BP monomer with the primary amino monomer N-(3-aminopropyl)methacrylamide hydrochloride (APMA) and the cross-linker monomer tetra ethylene glycol diacrylate, to form cross-linked NPs with a narrow size distribution. The size and size distribution of polyMA-Glu-BP NPs were controlled by changing various polymerization parameters. Near-infrared fluorescent polyMA-Glu-BP NPs were prepared by covalent binding of the dye cyanine7 N-hydroxysuccinimide to the primary amino groups belonging to the APMA monomeric units on the polyMA-Glu-BP NPs. The affinity of the near-infrared fluorescent polyMA-Glu-BP NPs toward calcium was demonstrated in vitro by a coral model. Cytotoxicity, cell uptake, and antibacterial properties of the polyMA-Glu-BP NPs against two common bacterial pathogens representing Gram-negative bacteria, Escherichia coli and Pseudomonas aeruginosa, and two representing Gram-positive bacteria, Listeria innocua and Staphylococcus aureus, were then demonstrated.

The opportunistic pathogen Pseudomonas aeruginosa causes infections that are difficult to treat by antibiotic therapy. This research article reports on the synthesis of gallium (Ga) doped in carbon (C)-dots (Ga@C-dots) and their antimicrobial activity against free-living P. aeruginosa bacteria. The synthesis of Ga@C-dots was carried out by sonicating molten Ga (for 2.5 h) in polyethylene glycol-400, which acts as both a medium and carbon source. The resultant Ga@C-dots, having an average diameter of 9±2 nm, showed remarkably enhanced antibacterial activity compared with undoped C-dots. This was reflected by the much lower concentration of Ga doped within Ga@C-dots which was required for full inhibition of the bacterial growth. These results highlight the possibility of using Ga@C-dots as potential antimicrobial agents.

A simple one-step process for the polymerization of dopamine has been developed using nitrogen-doped carbon dots (N@C&ndash, dots) as the sole initiator. The synthesized amorphous polydopamine (PDA)-doped N@C&ndash, dots (PDA&ndash, N@C&ndash, dots composite) exhibited a negative charge of &ndash, 39 mV with particle sizes ranging from 200 to 1700 nm. The stable colloidal solution was active against methicillin-resistant Staphylococcus aureus (MRSA), a Gram-negative bacterium. The strong adhesion of the polymer to the bacterial membrane resulted in a limited diffusion of nutrients and wastes in and out of the cell cytosol, which is a generic mechanism to trigger cell death. Another possible route is the autoxidation of the catechol moiety of PDA to form quinone and release reactive oxygen species (ROS) such as superoxide radicle and hydrogen peroxide, two well-known ROS with antimicrobial properties against both Gram-negative and Gram-positive bacteria.

The increased demand for water highlights the need to utilize reclaimed water of various types. In agriculture, for example, which is considered the largest consumer of freshwater, irrigation with treated wastewater can replace much of the need for freshwater. Wastewater is generally used for irrigation through drippers, releasing small amounts of water to the crops. The contaminants found in treated wastewater increase the accumulation of fouling on the drippers, ultimately culminating in blocking of water exit. Thus, there is a crucial need to develop novel approaches to limit biofilm formation on the dripper. Here, we describe the synthesis of N-halamine-derivatized cross-linked polymethacrylamide nanoparticles (NPs) by copolymerization of the monomer methacrylamide and the cross-linker monomer N, N-methylenebisacrylamide and their subsequent embedding in the polyethylene that is used to fabricate the drippers. The newly designed drip system was activated by chlorinating the incorporated NPs and then was fully characterized. The nanofunctionalized drippers were tested in the field, showing excellent antifouling activity for at least 5 months compared to the control. In addition, the inherent recharging capacity of the antifouling NPs constitutes yet another valuable advantage of the currently reported technology.

The vinylic monomer methylstyrene farmin (MSF) was synthesized by interacting p -chloromethyl styrene with farmin in basic distilled water. Crosslinked poly(methyl styrene farmin) nanoparticles (PMSF NPs) were then synthesized by dispersion co-polymerization of the MSF monomer with the crosslinking monomer tetra(ethylene glycol) diacrylate (TTEGDA) in an aqueous continuous phase. The effect of various polymerization parameters on the size and size distribution of the formed NPs has been elucidated. These PMSF NPs contain quaternary ammonium groups and long alkyl chain groups, and therefore are expected to possess efficient antibacterial and antibiofilm properties. The antibacterial and antibiofilm properties of PMSF NPs of 40 ± 9 nm and NPs-coated films were demonstrated. Due to their promising antibacterial and antibiofilm properties, these newly NPs could be utilized in a variety of industrial applications as a new type of biocide and antibiofilm additive.

In this study, we describe the synthesis and characterization of superparamagnetic core-shell iron oxide (IO)/N-halamine antibacterial nanoparticles (NPs). For this purpose, superparamagnetic IO core NPs were coated with cross-linked polymethacrylamide (PMAA) by surfactant-free dispersion copolymerization of methacrylamide and N,N-methylenebis(acrylamide) in an aqueous continuous phase. The effect of the polymerization process on the chemical composition, size, shape, crystallinity, and magnetic properties of the IO/PMAA NPs was elucidated. Conversion of the core-shell IO/PMAA NPs into their N-halamine form, IO/PMAA-Cl, was accomplished using a chlorination reaction with sodium hypochlorite. The influence of chlorination on the shape, crystallinity, and magnetic properties of the IO/PMAA NPs was studied. The IO/PMAA-Cl NPs demonstrated excellent antibacterial activity against Gram-negative and Gram-positive bacteria. Finally, the chlorination recharging capabilities of the NPs and their potential for use in the purification of water containing bacteria were demonstrated with magnetic columns packed with the IO/PMAA-Cl NPs.

Active packaging, a new technology concept in the field of food packaging, has been introduced in recent years in order to provide quality and safety, as well as extend the shelf life of food products. Antimicrobial (AM) agents can be incorporated directly into the active packaging and migrate in a controlled manner to the headspace between the food and the package, inhibiting bacteria growth on the food surface. Naturally derived AM agent, such as essential oils (EOs), has received considerable attention for food preservation purposes, because of their effective AM activity against various bacteria and fungi. In the present study, AM active film systems based on polypropylene/polyamide blends, montmorillonite nanoclays, and thymol EO were produced to investigate the feasibility of controlling the release rate of thymol from food packaging systems. Selective localization of thymol in a specific phase in the system that derives from thermodynamic affinity was assumed to be useful in controlling its migration rate from the film to the headspace. EO retention in the film under two different time conditions was measured by spectroscopic analysis. The release rate of EO was determined using Gas chromatography technique and analyzed by diffusion model approach. Inhibition of bacterial growth was periodically tested for Listeria and Escherichia coli bacteria. This study confirms the thermodynamic affinity of polyamide phase with thymol that has a positive effect in retaining the EO. Results show controlled AM behavior of the active packaging films, based on various blend compositions. Copyright © 2016 John Wiley & Sons, Ltd.

Streptococcus pneumoniae (S. pneumoniae) and Staphylococcus aureus (S.aureus) are considered the most common colonizers of cochlear implants (CI), which have prompted the search for new ways to inhibit their growth and biofilm development. In the current study, CI-based platforms are prepared and sonochemically coated with ZnO or MgF2 nanoparticles (NPs), two agents previously shown to possess antibacterial properties. Additionally, a method is developed for coating both ZnO and MgF2 on the same platform to achieve synergistic activity against both pathogens. Each surface is characterized, and the optimal conditions for the NP homogenous distribution on the surface are determined. The ZnO-MgF2 surface significantly reduces the S. pneumoniae and S. aureus biofilm compared with the surfaces coated with either ZnO or MgF2, even though it contains smaller amounts of each NP type. Importantly, leaching assays show that the NPs remain anchored to the surface for at least 7 d. Finally, biocompatibility studies demonstrate that coating with low concentrations of ZnO-MgF2 results in no toxicity toward primary human fibroblasts from the auditory canal. Taken together, these findings underscore the potential of using NP combinations such as the one presented here to efficiently inhibit bacterial colonization and growth on medical devices such as CIs.

Antimicrobial textiles can contribute to the fighting against antibiotic resistance pathogenic microorganisms. Polypyrrole is a conjugated polymer that exerts a biocidal action thanks to positive charges on its backbone chain produced during it synthesis. In this work, dispersions of stable polypyrrole nanoparticles were produced by chemical oxidative polymerization at room temperature in water. An ultrasound-assisted coating process was then used to effectively treat a polyester fabric with the nanoparticles to obtain an optimal antibacterial coating which efficiently eradicates the bacteria. The results showed that the treated fabric with about 4 g/m2 of polypyrrole had log bacteria reductions of 6.0 against Staphylococcus aureus and 7.5 against Escherichia coli. The combination of a polypyrrole synthesis in the form of water nanoparticles dispersions and a continuous coating of fabrics supported by ultrasound overcomes some issues of upscaling of the traditional in-situ chemical deposition used until now for the production of polypyrrole-coated textiles.

Restoring the antibacterial properties of existing antibiotics is of great concern. Herein, we present, for the first time, the formation and deposition of stable antibiotic nanoparticles (NPs) on graphene oxide (GO) sheets by a facile one-step sonochemical technique. Sonochemically synthesized graphene oxide/tetracycline (GO/TET) composite shows enhanced activity against both sensitive and resistant Staphylococcus aureus (S. aureus). The size and deposition of tetracycline (TET) nanoparticles on GO can be controlled by varying the sonication time. The synthesized NPs ranged from 21 to 180 nm. Moreover, ultrasonic irradiation does not cause any structural and chemical changes to the TET molecule as confirmed by Fourier transform infrared spectroscopy (FTIR). The virtue of π-π stacking between GO and TET additionally facilitate the coating of TET NPs upon GO. A time dependent release kinetics of TET NPs from the GO surface is also monitored providing important insights regarding the mechanism of antibacterial activity of GO/TET composites. Our results show that the GO/TET composite is bactericidal in nature, resulting in similar values of minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC). This composite is found to be active against TET resistant S. aureus at a concentration four times lower than the pristine TET. The sensitive S. aureus follows the same trend showing six times lower MIC values compared to pristine TET. GO shows no activity against both sensitive and resistant S. aureus even at a concentration as high as 1 mg/mL but influences the biocidal activity of the GO/TET composite. We propose that the unique structure and composition manifested by GO/TET composites may be further utilized for different formulations of antibiotics with GO. The sonochemical method used in this work can be precisely tailored for the stable deposition of a variety of antibiotics on the GO surface to reduce health risks and increase the spectrum of applications.

The emergence of antibiotic resistance of pathogenic bacteria has led to renewed interest in exploring the potential of plant-derived antimicrobials e.g., essential oils (EOs), as an alternative strategy to reduce microbial contamination. However, the volatile nature of EOs presents a major challenge in their incorporation into polymers by conventional high-temperature processing techniques. Herein, we employ halloysite nanotubes (HNTs) as efficient nano-carriers for carvacrol (a model EO). This pre-compounding encapsulation step imparts enhanced thermal stability to the carvacrol, allowing for its subsequent melt compounding with low-density polyethylene (LDPE). The resulting polymer nanocomposites exhibit outstanding antimicrobial properties with a broad spectrum of inhibitory activity against Escherichia coli, Listeria innocua in biofilms, and Alternaria alternata. Their antimicrobial effectiveness is also successfully demonstrated in complex model food systems (soft cheese and bread). This superior activity, compared to other studied carvacrol containing films, is induced by the significantly higher carvacrol content in the film as well as its slower out-diffusion from the hybrid system. Thus, these new active polymer nanocomposites presents an immense potential in controlling microbial contamination and biofilm related adverse effects, rendering them as excellent candidate materials for a wide range of applications.

Multifunctional substrates with superhydrophobic and biocidal properties are gaining interest for a wide range of applications; however, the production of such surfaces remains challenging. Here, the sonochemical method is utilized to impart superhydrophobicity and antimicrobial properties to a polyethylene (PE) sheet. This is achieved by sonochemically depositing nanoparticles (NPs) of a hydrophobic fluoro-polymer (FP) on the PE sheets. The polymer is a flexible, transparent fluoroplastic composed of tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride in the form of a powder. The NPs of polymers are generated and deposited on the surface of the PE using ultrasound irradiation. Optimizing the process results in a homogeneous distribution of 110–200 nm of NPs on the PE surface. The coated surface displays a water-contact angle of 160°, indicating excellent superhydrophobicity. This superhydrophobic surface shows high stability under outdoor conditions for two months, which is essential for various applications. In addition, metal-oxide nanoparticles (CuO or ZnO NPs) were integrated into the polymer coating to achieve antibacterial properties and increase the surface roughness. The metal oxides were also deposited sonochemically. The antibacterial activity of the FP@ZnO and FP@CuO PE composites was tested against the bacterium Staphylococcus aureus, and the results show that the FP@CuO PE can effectively eradicate the bacteria. This study highlights the feasibility of using the sonochemical method to deposit two separate functions, opening up new possibilities for producing “smart” novel surfaces.

The opportunistic pathogen Pseudomonas aeruginosa causes infections that are difficult to treat by antibiotic therapy. This research article reports on the synthesis of gallium (Ga) doped in carbon (C)-dots (Ga@C-dots) and their antimicrobial activity against free-living P. aeruginosa bacteria. The synthesis of Ga@C-dots was carried out by sonicating molten Ga (for 2.5 h) in polyethylene glycol-400, which acts as both a medium and carbon source. The resultant Ga@C-dots, having an average diameter of 9±2 nm, showed remarkably enhanced antibacterial activity compared with undoped C-dots. This was reflected by the much lower concentration of Ga doped within Ga@C-dots which was required for full inhibition of the bacterial growth. These results highlight the possibility of using Ga@C-dots as potential antimicrobial agents.

N-halamine-derivatized cross-linked polymethacrylamide nanoparticles with sizes ranging between 18 ± 2.0 and 460 ± 60 nm were prepared via surfactant-free dispersion co-polymerization of methacrylamide (MAA) and the cross-linking monomer N,N-methylenebisacrylamide (MBAA) in an aqueous continuous phase, followed by a chlorination process using sodium hypochlorite. The effect of various polymerization parameters (monomer concentration, initiator type and concentration, polymerization duration, polymerization temperature, and the weight ratio [MBAA]/[MAA]) on the size and size distribution of the produced cross-linked P(MAA–MBAA) nanoparticles was elucidated. The effect of various chlorination parameters (hypochlorite concentration, chlorination period and temperature) on the bound oxidative chlorine atom (Cl) content of the P(MAA–MBAA) nanoparticles was also investigated. The bactericidal activity of these chloramine-derivatized nanoparticles was tested against two common bacterial pathogens ( Escherichia coli and Staphylococcus aureus ), and they were found to be highly potent. Furthermore, these nanoparticles also exerted their antimicrobial activity against multi-drug resistant (MDR) bacteria, further demonstrating their efficacy.

Surface hydroperoxide-conjugated polypropylene (PP) films were prepared by optimal ozonolysis processing of the films. These hydroperoxide-conjugated groups were then used as initiators at room temperature for redox graft polymerization of the fluoro vinylic monomer 1H,1H-heptaflourobutyl methacrylate (HFBM). The ozonolysis process allows, on one hand, for the formation of the desired hydroperoxide-conjugated groups while, on the other hand, leads to an undesired degradation of the PP. The ozone treatment time was therefore optimized to obtain sufficient hydroperoxide groups for graft polymerization, while maintaining the mechanical strength of the films, which was barely affected. The resulting PP-PolyHFBM (PP-PHFBM) films were characterized by methods such as AFM, ATR, TGA, contact angle goniometry and XPS. The antibiofilm properties of the PP-PHFBM films were evaluated, using two bacterial strains. An 86% inhibition was observed for the Gram-negative Escherichia coli, and a 37% inhibition was observed for the Gram-positive Listeria.

The spread of antibiotic resistance and increasing prevalence of biofilm-associated infections is driving demand for new means to treat bacterial infection. Nanotechnology provides an innovative platform for addressing this challenge, with potential to manage even infections involving multidrug-resistant (MDR) bacteria. The current review summarizes recent progress over the last 2 years in the field of antibacterial nanodrugs, and describes their unique properties, mode of action and activity against MDR bacteria and biofilms. Biocompatibility and commercialization are also discussed. As opposed to the more common division of nanoparticles (NPs) into organic- and inorganic-based materials, this review classifies NPs into two functional categories. The first includes NPs exhibiting intrinsic antibacterial properties and the second is devoted to NPs serving as a cargo for delivering antibacterial agents. Antibacterial nanomaterials used to decorate medical devices and implants are reviewed here as well.

There has been increased concern during the past few decades over the role bacterial biofilms play in causing a variety of health problems, especially since they exhibit a high degree of resistance to antibiotics and are able to survive in hostile environments. Biofilms consist of bacterial aggregates enveloped by a self-produced matrix attached to the surface. Ca2+ ions promote the formation of biofilms, and enhance their stability, viscosity, and strength. Bisphosphonates exhibit a high affinity for Ca2+ ions, and may inhibit the formation of biofilms by acting as sequestering agents for Ca2+ ions. Although the antibacterial activity of bisphosphonates is well known, research into their anti-biofilm behavior is still in its early stages. In this study, we describe the synthesis of a new thin coating composed of poly(styryl bisphosphonate) grafted onto oxidized polypropylene films for anti-biofilm applications. This grafting process was performed by graft polymerization of styryl bisphosphonate vinylic monomer onto O2 plasma-treated polypropylene films. The surface modification of the polypropylene films was confirmed using surface measurements, including X-ray photoelectron spectroscopy, atomic force microscopy, and water contact angle goniometry. Significant inhibition of biofilm formation was achieved for both Gram-negative and Gram-positive bacteria.

Increased resistance of bacteria to disinfection and antimicrobial treatment poses a serious public health threat worldwide. This has prompted the search for agents that can inhibit both bacterial growth and withstand harsh conditions (e.g., high organic loads). In the current study, N-halamine-derivatized cross-linked polymethacrylamide nanoparticles (NPs) were synthesized by copolymerization of the monomer methacrylamide (MAA) and the cross-linker monomer N,N-methylenebis(acrylamide) (MBAA) and were subsequently loaded with oxidative chlorine using sodium hypochlorite (NaOCl). The chlorinated NPs demonstrated remarkable stability and durability to organic reagents and to repetitive bacterial loading cycles as compared with the common disinfectant NaOCl (bleach), which was extremely labile under these conditions. The antibacterial mechanism of the cross-linked P(MAA-MBAA)-Cl NPs was found to involve generation of reactive oxygen species (ROS) only upon exposure to organic media. Importantly, ROS were not generated upon suspension in water, revealing that the mode of action is target-specific. Further, a unique and specific interaction of the chlorinated NPs with Staphylococcus aureus was discovered, whereby these microorganisms were all specifically targeted and marked for destruction. This bacterial encircling was achieved without using a targeting module (e.g., an antibody or a ligand) and represents a highly beneficial, natural property of the P(MAA-MBAA)-Cl nanostructures. Our findings provide insights into the mechanism of action of P(MAA-MBAA)-Cl NPs and demonstrate the superior efficacy of the NPs over bleach (i.e., stability, specificity, and targeting). This work underscores the potential of developing sustainable P(MAA-MBAA)-Cl NP-based devices for inhibiting bacterial colonization and growth.

Objectives To examine the efficiency of a bacteria-resistant coating for the polydimethylsiloxane (PDMS) casing of cochlear implants. Methods The coatings are based on thin titania films that are made by liquid phase deposition or atomic layer deposition. The antibacterial activity of the coating was tested by two different detection assays: BCA protein and confocal microscopy. Results Coating the PDMS with thin films (10–40 nm) of titania significantly reduces the accumulation of bacteria. Discussion Thin oxide films made under conditions that do not undermine the integrity of polymeric materials can be used as anti-microbial coatings for soft polymers such as the PDMS that is used as a casing for cochlear implants or other medical devices.

Antimicrobial packaging can preserve and increase shelf life of free preservatives food products. Active materials present in the packaging material can migrate, in a controlled manner, to the food surface, avoiding bacterial and fungal proliferation and keeping the food product edible for longer periods of time. Essential oils (EO) are natural antimicrobial agents that can be released to the headspace with no direct contact between the package and the food. To minimize loses of EO during high heat melt processing, a three stages process was implemented and tested. Antimicrobial films were prepared by melt mixing a variety of polyethylene copolymers in the presence of organo-modified montmorillonite nano clay (NC) and thymol, an EO present in oregano and thyme. A controlled EO desorption from films can be achieved by changing the polymer crystallinity and polarity. As the crystallinity increased, the thermal stability of the EO during the extrusion process improved. The addition of NC affects the structure and homogeneity of the crystals. The combination of high polymer crystallinity and chemical affinity between EO and NC increased the thermal stability of the EO during film processing, enabling to control the desorption rate. The effect of multilayer structure based on varied densities and polarities was also studied. Increasing the polarity of the outer layers in multilayered film reduced the EO desorption rate as a result of chemical interactions between the polymer and the EO. The final antimicrobial activity of the films was also found to be dependent on the EO partitioning. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40309.

Background Isothiouronium salts are well known in their variety of antimicrobials activities. The use of polymeric biocides, polymers with antimicrobial activities, is expected to enhance the efficacy of some existing antimicrobial agents, thus minimizing the environmental problems accompanying conventional antimicrobials. Methods The current manuscript describes the synthesis and characterization of crosslinked polyisothiouronium methylstyrene (PITMS) nanoparticles (NPs) of narrow size distribution by dispersion co-polymerization of the monomer isothiouronium methylstyrene with the crosslinking monomer ethylene glycol dimetacrylate. Results and discussion The effect of total monomer, crosslinker and initiator concentrations on the size and size distribution of the formed NPs was also elucidated. The bactericidal activity of PITMS NPs of 67 ± 8 nm diameter was illustrated for 4 bacterial pathogens: Listeria innocua, Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus. In order to demonstrate the potential of these PITMS NPs as inhibitor of biofilm formation, polyethylene terephthalate (PET) films were thin-coated with the PITMS NPs. The formed PET/PITMS films reduced the viability of the biofilm of Listeria by 2 orders of magnitude, making the coatings excellent candidates for further development of non-fouling surfaces. In addition, PITMS NP coatings were found to be non-toxic in HaCaT cells. Conclusions The high antibacterial activity and effective inhibition of bacterial adsorption indicate the potential of these nanoparticles for development of new types of antibacterial and antibiofilm additives. Electronic supplementary material The online version of this article (doi:10.1186/s12951-016-0208-7) contains supplementary material, which is available to authorized users.