Search

The last decade has seen an increasingly large number of studies reporting on the development of novel small organic conjugated systems for mitochondrial imaging exploiting optical signal transduction pathways. Mitochondria are known to play a critical role in a number of key biological processes, including cellular metabolism. Importantly, irregularities on their working function are nowadays understood to be intimately linked to a range of clinical conditions, highlighting the importance of targeting mitochondria for therapeutic benefits. In this work we carry out an in-depth evaluation on the progress to date in the field to pave the way for the realization of superior alternatives to those currently existing. The manuscript is structured by commonly used chemical scaffolds and comprehensively covers key aspects factored in design strategies such as synthetic approaches as well as photophysical and biological characterization, to foster collaborative work among organic and physical chemists as well as cell biologists.

The eggshell membrane (ESM) is an abundant resource with innate complex structure and composition provided by nature. With at least 60 million tonnes of hen eggs produced globally per annum, utilisation of this waste resource is highly attractive in positively impacting sustainability worldwide. Given the morphology and mechanical properties of this membrane, it has great potential as a biomaterials for wound dressing. However, to date, no studies have demonstrated nor reported this application. As such, the objective of this investigation was to identify and optimise a reproducible extraction protocol of the ESM and to assess the physical, chemical, mechanical and biological properties of the substrate with a view to use as a wound dressing. ESM samples were isolated by either manual peeling (ESM-strip) or via extraction using acetic acid [ESM-A0.5] or ethylenediaminetetraacetic acid, EDTA [ESM-E0.9]. Energy dispersive X-ray spectroscopy (EDS) confirmed that there were no traces of calcium residues from the extraction process. Fourier transform infrared (FTIR) spectroscopy revealed that the extraction method (acetic acid and EDTA) did not alter the chemical structures of the ESM and also clarified the composition of the fibrous proteins of the ESM. Scanning electron microscopy (SEM) analyses revealed a three-layer composite structure of the ESM: an inner layer as continuous, dense and non-fibrous (limiting membrane), a middle layer with a network of fibres (inner shell membrane) and the outer layer (outer shell membrane) of larger fibres. Material properties including optical transparency, porosity, fluid absorption/uptake, thermal stability, mechanical profiling of the ESM samples were performed and demonstrated suitable profiles for translational applications. Biological in vitro studies using SV40 immortalised corneal epithelial cells (ihCEC) and corneal mesenchymal stromal cells (C-MSC) demonstrated excellent biocompatibility. Taken together, these results document the development of a novel sustainable biomaterial that may be used for ophthalmic wounds and/or other biomedical therapies.

Poly(N-isopropyl acrylamide)-block-poly(ethylene glycol)-block-poly(N-isopropyl acrylamide) is known to exhibit a thermally-induced solution-to-gel transition in water, which may be exploited for biomedical applications. This “thermoreversible gelator” has great potential for application in topical administration to the surfaces of the body such as the skin, eye, and vagina, but this has not yet been evaluated. This study evaluates PNIPAM98–PEG122–PNIPAM98 as a thermoreversible gelator for vaginal administration, for the first time evaluating the effect of polymer concentration on gelation, studying rheological parameters relevant to topicals, measuring dissolution rates, stability and the phenomenon of mucoadhesion. Two drugs relevant to vaginal administration, progesterone and tenofovir disoproxil fumarate are investigated for use in the thermoreversible gelators, studying both hydrophobic and hydrophilic drug solubilisation and release. Throughout the study, comparison is made with poloxamer 407, the most commonly studied thermoreversible gelator. PNIPAM98–PEG122–PNIPAM98 exhibits several advantages for topical administration, having low viscosity at room temperature to allow easy application, then exhibiting a gelation just below body temperature to form a viscous gel which is resistant to dissolution and relatively mucoadhesive. Drug release is highly dependent on temperature, with elevation to body temperature resulting in a dramatic retardation of progesterone release, which may be used in future medicines to provide sustained delivery of hydrophobic xenobiotics.

© 2020 Royal Society of Chemistry. This is the accepted manuscript version of an article which has been published in final form at https://doi.org/10.1039/D0ME00093K.

Drinks and foods may be thickened to improve swallowing safety for dysphagia patients, but the resultant consistencies are not always palatable. Characterising alternative appetising foods is an important task. The study aims to characterise the in vitro swallowing behaviour of specifically formulated thickened dysphagia fluids containing xanthan gum and/or starch with standard jellies and yoghurt using a validated mechanical model, the “Cambridge Throat”. Observing from the side, the model throat can follow an experimental oral transit time (in vitro-OTT) and a bolus length (BL) at the juncture of the pharynx and larynx, to assess the velocity and cohesion of bolus flow. Our results showed that higher thickener concentration produced longer in vitro-OTT and shorter BL. At high concentration (spoon-thick), fluids thickened with starch-based thickener showed significantly longer in vitro-OTT than when xanthan gum-based thickener was used (84.5 s ± 34.5 s and 5.5 s ± 1.6 s, respectively, p

This study describes thermo-rheological properties of branched copolymer surfactants (BCSs) stabilizing oil-in-water emulsions to generate materials exhibiting temperature-dependent gelation with the ability to solubilize a broad range of molecules. Four poly(N-isopropylacrylamide-ran-poly(ethylene glycol) methacrylate) (poly(NIPAM-ran-PEGMA)) BCSs with varying molecular weight (Mn), 4.7; 7.0; 7.8 and 9.0 kg mol−1, are investigated via oscillatory shear rheology, small angle neutron scattering (SANS), and neutron reflectivity (NR). Rheological thermoscans show that emulsions stabilized by the BCS with the lowest Mn (4.7 kg mol−1) are thermo-thinning, while with the other BCSs the emulsions display a thermo-thickening behavior. Emulsions stabilized with the BCS with Mn = 7.8 kg mol−1 form gels within a precise temperature window depending on BCS concentration. Small angle neutron scattering data analysis suggests that the BCS is present in two forms in equilibrium, small aggregates dispersed in the bulk water and an adsorbed polymeric layer at the oil/water interface. Changes in dimensions of these structures with temperature correlate with the macroscopic thermo-thinning/thermo-thickening behavior observed. Neutron reflectivity is conducted at the oil/water interface to allow further elucidation of BCS behavior in these systems., This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547. SasView also contains code developed with funding from the European Union's Horizon 2020 Research and Innovation Programme under the SINE2020 project, grant agreement No 654000. Experiments at the ISIS Neutron and Muon Source were supported by a beamtime allocation RB2000184 for Sans2d from the Science and Technology Facilities Council (10.5286/ISIS.E.RB2000184). The authors thank Institut Laue Langevin for the provision of neutron beam time on D11 instrument (10.5291/ILL-DATA.9-11-2028) and on Figaro instrument (10.5291/ILL-DATA.9-11-2028). The Engineering and Physical Sciences Research Council (EP/T00813X/1) and Royal Society of Chemistry (RF17-9915) are acknowledged for funding the research. The Royal Society of Chemistry and the Analytical Chemistry Trust Fund are also thanked for sponsoring the summer research project of D.O-A.

When developing buccal films for oromucosal drug administration, adhesion is essential to ensure sufficient time for permeation of the active ingredient(s) through the oral mucosa and avoid the detachment and subsequent swallowing of the film. In this study, biomimetic materials were evaluated as a replacement for buccal mucosa in mucoadhesion testing and potential adhesives were compared regarding their suitability to increase the adhesion of hypromellose-based oromucosal films. Gelatin gels, as possible biomimetics, failed to mimic the buccal mucosa. Furthermore, esophageal tissue lead to a wider variance of adhesion data despite showing a good correlation with buccal tissue. A synthetic copolymer hydrogel based on hydroxyethylmethacrylate (HEMA) and N-acryloyl glucosamine (AGA) was able to mimic the buccal mucosa in these tests and reduced the variation in the data compared to animal tissue. Adding polyacrylic acid and polyvinylpyrrolidone to the film formulations at a concentration of 5 % w/w approximately doubled the maximum detachment force and work of adhesion. Sodium alginate enhanced the adhesive properties moderately but adding chitosan did not significantly increase mucoadhesion. Polyvinylpyrrolidone and polyacrylic acid are rated as strong adhesion enhancers for buccal films and the HEMA/AGA hydrogel is considered as a suitable alternative for animal mucosa in mucoadhesion testing.

Erythrosine is a dye approved for medical use that has shown promising photodynamic activity, allowing for the inactivation of microorganisms and activity against malignant cells. Despite the great photodynamic potential, erythrosine exhibits hydrophilicity, negatively impacting its action in biological membranes. Therefore, the incorporation of erythrosine in micellar polymeric systems, such as poloxamers, may overcome this limitation. Moreover, using bioadhesive and thermoresponsive polymers to combine in situ gelation and bioadhesion may enhance retention of this topically applied drug. In this work, mucoadhesive and thermoresponsive micellar systems were prepared containing erythrosine in two states: the native form (ERI) and the disodium salt (ERIs). The systems were evaluated based on the effect of ERI/ERIs on the micellar structure of the binary polymer mixtures. Optimised combinations of poloxamer 407 (polox407) and mucoadhesive sodium carboxymethylcellulose (NaCMC) or hydroxypropyl methylcellulose (HPMC) were used as micellar systems for ERI or ERIs delivery. The systems were studied with respect to theoretical interactions, qualitative composition, morphology, and micellar properties. In silico modelling indicated a higher interaction of the drug with poly(ethylene oxide) (PEO) than poly(propylene oxide) (PPO) fragments of polox407. Systems containing NaCMC displayed a repulsive effect in the presence of erythrosine, due to the polymer's charge density. Both systems could convert the photosensitizer in its monomeric form, ensuring photodynamic activity. In these mixtures, crystallinity, critical micellar temperature and enthalpy of polox407 micellisation were reduced, and micellar size, evaluated by transmission electron microscopy (TEM), showed low impact of ERI/ERIs in HPMC preparations. Aiming toward photodynamic applications, the findings showed how ERI or ERIs can affect the micellar formation of gels composed of 17.5% (w/w) polox407 and 3% (w/w) HPMC or 1% (w/w) NaCMC, important for understating their behaviour and future utilisation as erythrosine delivery systems.

Temperature-responsive nanomaterials have gained increasing interest over the past decade due their ability to undergo conformational changes in situ, in response to a change in temperature. One class of temperature-responsive polymers are those with lower critical solution temperature, which phase separate in aqueous solution above a critical temperature. When these temperature-responsive polymers are grafted to a solid nanoparticle, a change in their surface properties occurs above this critical temperature, from hydrophilic to more hydrophobic, giving them a propensity to aggregate. This study explores the temperature induced aggregation of silica nanoparticles functionalised with two isomeric temperature-responsive polymers with lower critical solution temperature (LCST) behavior, namely poly(N-isopropyl acrylamide) (PNIPAM), and poly(2-n-propyl-2-oxazoline) (PNPOZ) with similar molecular weights (5000 Da) and grafting density. These nanoparticles exhibited striking differences in the temperature of aggregation, which is consistent with LCST of each polymer. Using a combination of small-angle neutron scattering (SANS) and dynamic light scattering (DLS), we probed subtle differences in the aggregation mechanism for PNIPAM- and PNPOZ-decorated silica nanoparticles. The nanoparticles decorated with PNIPAM and PNPOZ show similar aggregation mechanism that was independent of polymer structure, whereby aggregation starts by the formation of small aggregates. A further increase in temperature leads to interaction between these aggregates and results in full-scale aggregation and subsequent phase separation.

Thiol-bearing microgels have been synthesised from copolymerisation of 2-(acetylthio)ethylacrylate and 2-hydroxyethylmethacrylate, and subsequent deprotection using sodium thiomethoxide. The concentration of thiol groups on these microgels could be tailored by use of different molar ratios of the two monomers. These thiol-bearing microgels were shown to adhere to ex vivo porcine urinary bladder, which was correlated with their level of thiolation. By simply mixing solutions of thiol-bearing microgels and doxorubicin, high levels of drug loading into the microgels could be achieved. Thiol-bearing microgels controlled the release of doxorubicin in a time-dependent manner over several hours. These doxorubicin-loaded thiol-bearing microgels could have application in the treatment of early-stage bladder cancers. The method used represents a new ‘bottom-up’ approach for the synthesis of novel mucoadhesive microgels.

Graft copolymers with brush-type architectures are explored containing poly(ethylene glycol) methacrylates copolymerized with “thermoresponsive” monomers which impart lower critical solution temperatures to the polymer. Initially, the chemical structure of the thermoresponsive polymer is explored, synthesizing materials containing N-isopropyl acrylamide, N,N-diethyl acrylamide and diethylene glycol methyl ether methacrylate. Thermoresponsive graft-copolymers containing di(ethylene glycol) methyl ether methacrylate (DEGMA) exhibited phase transition temperature close to physiological conditions (ca 30 °C). The effect of polymer composition was explored, including molecular weight, PEG-methacrylate (PEGMA) terminal functionality and PEGMA/DEGMA ratios. Molecular weight exhibited complex relationships with phase behavior, where lower molecular weight systems appeared more stable above lower critical solution temperatures (LCST), but a lower limit was identified. PEGMA/DEGMA feed was able to control transition temperature, with higher PEGMA ratios elevating thermal transition. It was found that PEGMA terminated with methoxy functionality formed stable colloidal structures above LCST, whereas those the hydroxy termini generally formed two-phase sedimented systems when heated. Two thermoresponsive DEGMA-based graft polymers, poly(PEGMA7-ran-DEGMA170) and poly(PEGMA1-ran-DEGMA38), gave interesting temperature-dependent rheology, transitioning to a viscous state upon heating. These materials may find application in forming thermothickening systems which modify rheology upon exposure to the body’s heat.

Thermoreversible gels which transition between liquid-like and solid-like states when warmed have enabled significant novel healthcare technologies. Poly(N,N-diethyl acrylamide) (PDEA) is a thermoresponsive polymer which could be used as a trigger to form thermoreversible gels, however its use in these materials is limited and crucial design principles are unknown. Herein copolymers with the structure PDEA-b-poly(ethylene glycol) (PEG)-b-PDEA were synthesized to give four block copolymers with varied molecular weight of PDEA and PEG blocks. Rheometry on solutions of the block copolymers revealed that high molecular weight PEG blocks were required to form thermoreversible gels with predominantly solid-like behaviour. Furthermore, small-angle X-ray scattering elucidated clear differences in the nanostructure of the copolymer library which can be linked to distinct rheological behaviours. A thermoreversible gel formulation based on PDEA (20 kDa)-b-PEG (10 kDa)-b-PDEA (20 kDa) was designed by optimising the polymer concentration and ionic strength. It was found that the gel was mucoadhesive, stable and non-toxic, as well as giving controlled release of a hydrophobic drug. Overall, this study provides insight into the effect of polymer architecture on the nanostructure and rheology of PDEA-b-PEG-b-PDEA and presents the development of a highly functional thermoreversible gel with high promise for healthcare applications. This article is protected by copyright. All rights reserved.

Intravaginal drug delivery can elicit a local effect, or deliver drugs systemically without hepatic first pass metabolism. There are a number of emerging areas in intravaginal drug delivery, but the vagina is a challenging route of administration, due to the clearance mechanisms present which result in poor retention of dosage forms, and the potential for irritation and other adverse reactions. Gel formulations are desirable due to the ease of application, spreading and that they cause little to no discomfort to the patient. However, these dosage forms, in particular, are poorly retained and traditional gels typically have little control over drug release rates. This has led to a large number of studies on improving the retention of vaginal gels and modulating the controlled release of drugs from the gel matrix. This review outlines the anatomy and physiology of the vagina, focussing on areas relevant to drug delivery. Medical applications of vaginally administered medicines is then discussed, followed by an overview of polymeric gels in intravaginal drug delivery. The sensorial properties of intravaginal gels, and how these relate to user compliance are also summarised. Finally, some important barriers to marketing approval are described.

Mucosa-mimetic materials are synthetic substrates which aim to replace animal tissue in mucoadhesion experiments. One potential mucosa-mimetic material is a hydrogel comprised of N-acryloyl-d-glucosamine and 2-hydroxyethylmethacrylate, which has been investigated as a surrogate for animal mucosae in the mucoadhesion testing of tablets and solution formulations. This study aims to investigate the efficacy of this mucosa-mimetic material in the testing of thermogelling semi-solid formulations, which transition from solution to gel upon warming. Two methods for assessing mucoadhesion have been used; tensile testing and a flow-through system, which allow for investigation under dramatically different conditions. It was found that the mucosa-mimetic material was a good surrogate for buccal mucosa using both testing methods. This material may be used to replace animal tissue in these experiments, potentially reducing the number of laboratory animals used in studies of this type.

In this paper, we report the synthesis and self-assembly of a novel thermoresponsive PNIPAM60–b-PDMS70–b-PNIPAM60 triblock copolymer in aqueous solution. The copolymer used a commercially available precursor modified with an atom transfer radical polymerization (ATRP) initiator to produce an ABA triblock copolymer via ATRP. Small-angle neutron scattering (SANS) was used to shed light on the structures of nanoparticles formed in aqueous solutions of this copolymer at two temperatures, 25 and 40 °C. The poly(dimethylsiloxane) block is very hydrophobic and poly(N-isopropylacrylamide) (PNIPAM) is thermoresponsive. SANS data at 25 °C indicates that the solutions of PNIPAM–b-PDMS–b-PNIPAM copolymers form well-defined aggregates with presumably core–shell structures below cloud point temperature. The scattering curves originating from nanoparticles formed at 40 °C in 100% D2O or 100% H2O were successfully fitted with the Beaucage model describing aggregates with hierarchical structure.

Oxidative stress plays an important role in the pathogenesis of chronic obstructive pulmonary disease (COPD). COPD is one of the leading causes of mortality in the UK. Current treatment options for COPD are limited and do not prevent disease progression. Hence, there is an urgent requirement for alternative novel therapeutic approaches. Stilbenoid natural products, including trans-resveratrol and synthetic analogues have demonstrated a variety of biological properties, in particular anti-oxidant and anti-inflammatory properties. Cell health assessments were carried out using the stilbene sulfonamide compound library (0.1 μM to 100 μM) against 2D human lung airway epithelial/immune cells for their efficacy for use as novel inhalable drugs. Some of the analogues have shown promising anti-oxidant potential in vitro, displaying comparable activity as resveratrol at 10 µM concentrations. In particular compound 6G was observed to possess strong anti-oxidant and anti-inflammatory activity at 10 µM (Figure 1). This library of trans-stilbene sulfonamide analogues warrant further investigation to assess their potential use for airway diseases such as COPD and asthma.

Systems composed of bioadhesive and thermoresponsive polymers can combine in situ gelation with bio/mucoadhesion, enhancing retention of topically applied drugs. The effect of bioadhesive sodium carboxymethylcellulose (NaCMC) and hydroxypropyl methylcellulose cellulose (HPMC) on the properties of thermoresponsive Pluronic® F127 (F127) was explored, including micellization and the mucoadhesion. A computational analysis between these polymers and their molecular interactions were also studied, rationalising the design of improved binary polymeric systems for pharmaceutical and biomedical applications. The morphological characterization of polymeric systems was conducted by SEM. DSC analysis was used to investigate the crystallization and micellization enthalpy of F127 and the mixed systems. Micelle size measurements and TEM micrographs allowed for investigation into the interference of cellulose derivatives on F127 micellization. Both cellulose derivatives reduced the critical micellar concentration and enthalpy of micellization of F127, altering hydrodynamic diameters of the aggregates. Mucoadhesion performance was useful to select the best systems for mucosal application. The systems composed of 17.5% (w/w) F127 and 3% (w/w) HPMC or 1% (w/w) NaCMC are promising as topical drug delivery systems, mainly on mucosal surfaces. They were biocompatible when tested against Artemia salina, and also able to release a model of hydrophilic drug in a controlled manner.

In this study, we report detailed information on the internal structure of PNIPAM-b-PEG-b-PNIPAM nanoparticles formed from self-assembly in aqueous solutions upon increase in temperature. NMR spectroscopy, light scattering, and small-angle neutron scattering (SANS) were used to monitor different stages of nanoparticle formation as a function of temperature, providing insight into the fundamental processes involved. The presence of PEG in a copolymer structure significantly affects the formation of nanoparticles, making their transition to occur over a broader temperature range. The crucial parameter that controls the transition is the ratio of PEG/PNIPAM. For pure PNIPAM, the transition is sharp; the higher the PEG/PNIPAM ratio results in a broader transition. This behavior is explained by different mechanisms of PNIPAM block incorporation during nanoparticle formation at different PEG/PNIPAM ratios. Contrast variation experiments using SANS show that the structure of nanoparticles above cloud point temperatures for PNIPAM-b-PEG-b-PNIPAM copolymers is drastically different from the structure of PNIPAM mesoglobules. In contrast with pure PNIPAM mesoglobules, where solidlike particles and chain network with a mesh size of 1-3 nm are present, nanoparticles formed from PNIPAM-b-PEG-b-PNIPAM copolymers have nonuniform structure with "frozen" areas interconnected by single chains in Gaussian conformation. SANS data with deuterated "invisible" PEG blocks imply that PEG is uniformly distributed inside of a nanoparticle. It is kinetically flexible PEG blocks which affect the nanoparticle formation by prevention of PNIPAM microphase separation.

Tissue engineering is a rapidly expanding field that aims to establish feasible techniques to fabricate biologically equivalent replacements for diseased and damaged tissues/organs. Emerging from this prospect is the development of in vitro representations of organs for drug toxicity assessment. Due to the ever-increasing interest in ocular drug delivery as a route for administration as well as the rise of new ophthalmic therapeutics, there is a demand for physiologically accurate in vitro models of the eye to assess drug delivery and safety of new ocular medicines. This review summarizes current existing ocular models and highlights the important factors and limitations that need to be considered during their use.

Thermoreversible gels switch from a free-flowing liquid state to an elastic gel mesophase upon warming, displaying the reverse transition upon cooling. While this phenomenon makes these advanced materials highly attractive in numerous fields, the generation of optimal materials of tailored rheology and transition temperatures is stifled by the lack of design principles. To address this need, a library of ABA copolymers has been prepared with “A” blocks exhibiting thermoresponsive behavior and “B” blocks of poly(ethylene glycol). This library evaluates the effect of “A” chemistry, probing three polymer classes, and A/B block molecular weight on thermally-induced phase changes in solutions of the polymers. An exploration by rheometry coupled to Small-Angle Neutron Scattering (SANS) elucidates temperature-dependent hierarchical self-assembly processes occurring on the nanoscale as well as bulk rheology. This process deciphered links between rheology and supracolloidal assemblies (sphere, ellipses, and cylinders) within the gel state with interactions probed further via structure factors. Several design principles are identified to inform the genesis of next-generation thermoreversible gels, alongside novel materials exhibited thermoresponsive behavior in the solution state for use in applied healthcare technologies.

Funding Information: M.T.C. acknowledges support from the EPSRC (EP/T00813X/1). The University of Hertfordshire are thanked for funding the research project of P.H. Publisher Copyright: © 2020 The Authors. Advanced Functional Materials published by Wiley-VCH GmbH

This work investigated the permeability of lidocaine across human eyelid skin and compared this with published data for abdominal skin to understand the characteristics of this type of skin and whether topical anaesthesia for eyelid surgery may be feasible. Eyelid skin is thought to have a relatively high permeability to drugs, however how this compares to other body sites has not been previously quantified. Lidocaine solutions at pH 7.0 and 5.5 were applied to human eyelid skin mounted in Franz diffusion cells. Anatomical features of eyelid skin that may be linked to its increased permeability, superficial corneocyte area and stratum corneum (SC) thickness were measured using light microscopy. Steady-state fluxes of lidocaine at pH 7.0 and pH 5.5 were 283.9 and 41.0 μg/cm2/hr, 2.4 and 3.2 times greater respectively than literature values for abdominal skin. Superficial eyelid corneocyte area (800.5 μm2) was 35% smaller and the eyelid SC thickness (14.9 μm) was 31% thinner than reported abdominal skin values. These suggest that a shorter diffusional pathlength across the eyelid SC contributes to increased lidocaine permeability. The relatively high permeability of eyelid skin to lidocaine indicates considerable potential for achieving strong topical anaesthetic effects at this site.

The human vitreous humour is a complex gel structure whose composition and physical properties can vary considerably from person to person and also change with age. To date, the viscoelastic properties of the human vitreous gel has not been thoroughly investigated and despite many years of intensive research, an ideal vitreous substitute remains a challenge. Understanding the physical structure and properties of the vitreous is of fundamental and therapeutic interest, providing a clear insight into diffusion and transport of administered ophthalmic drug molecules into the vitreous. A number of mammalian surrogates, mainly bovine, porcine and ovine vitreous humours have been used in the literature as a means of studying ophthalmic drug transport and diffusion. In this study, the mechanical, physical and rheological properties of ovine, porcine, and bovine surrogates were investigated and compared to human vitreous. In addition, a bespoke Franz cell construct was used to compare the diffusion of a model drug (fluorescein) through vitreous samples. Despite the similarity in rheological properties between bovine, porcine and human vitreous samples, diffusion of fluorescein through the different vitreous samples revealed great differences in values of steady-state flux and diffusion coefficient. In addition, a first-generation vitreous mimic, composed of 4.5 mg/mL hyaluronic acid with complex viscosity of 0.3 ± 0.01 Pa has been evaluated and was demonstrated to be a better mimic of the human vitreous than the mammalian samples investigated.

Mucoadhesion describes an attractive interaction between dosage form and mucosal membrane. The evaluation of mucoadhesive excipients often requires the use of ex vivo mucosal tissues taken from laboratory animals. These can be difficult to source, highly heterogeneous, and require the use of animal products. Thus, from both a user-convenience and ethical point-of-view, it is desirable to produce a synthetic alternative to these tissues-a mucosa-mimetic material. In this mini-review, the use of alternative materials to test the performance of mucoadhesives is reviewed and discussed. There is a surprising prevalence of the use of mucosa-mimics in the literature, which hitherto has not been compiled and compared.

Probiotic bacteria have gained popularity as a defence against disorders of the bowel. However, the acid sensitivity of these cells results in a loss of viability during gastric passage and, consequently, a loss of efficacy. Probiotic treatment can be supplemented using ‘prebiotics’, which are carbohydrates fermented specifically by probiotic cells in the body. This combination of probiotic and prebiotic is termed a ‘synbiotic’. Within this article a multiparticulate dosage form has been developed, consisting of poly(d,l-lactic-co-glycolic acid) (PLGA) microcapsules containing prebiotic Bimuno™ incorporated into an alginate–chitosan matrix containing probiotic Bifidobacterium breve. The aim of this multiparticulate was that, in vivo, the probiotic would be protected against gastric acid and the release of the prebiotic would occur in the distal colon. After microscopic investigation, this synbiotic multiparticulate was shown to control the release of the prebiotic during in vitro gastrointestinal transit, with the release of galacto-oligosaccharides (GOS) initially occurred over 6 h, but with a triphasic release pattern giving further release over 288 h. Encapsulation of B. breve in multiparticulates resulted in a survival of 8.0 ± 0.3 log CFU/mL cells in acid, an improvement over alginate–chitosan microencapsulation of 1.4 log CFU/mL. This was attributed to increased hydrophobicity by the incorporation of PLGA particles.

The objective of this study was to identify, understand and generate a Taguchi orthogonal array model for the formation of 10-50 μm microparticles with applications in topical/ocular controlled drug delivery. Poly(lactic-co-glycolic acid) (PLGA) microparticles were fabricated by the single emulsion oil-in-water method and the particle size was characterized using laser diffraction and scanning electronic microscopy (SEM). Sequential Taguchi L12 and L18 orthogonal array (OA) designs were employed to study the influence of ten and eight parameters, respectively, on microparticle size (response). The first optimization step using the L12 design showed that all parameters significantly influenced the particle size of the prepared PLGA microparticles with exception of the concentration of poly(vinyl alcohol) (PVA) in the hardening bath. The smallest mean particle size obtained from the L12 design was 54.39 μm. A subsequent L18 design showed that the molecular weight of PLGA does not significantly affect the particle size. An experimental run comprising of defined parameters including molecular weight of PLGA (89 kDa), concentration of PLGA (20% w/v), concentration of PVA in the emulsion (0.8% w/v), solvent type (ethyl acetate), organic/aqeuous phase ratio (1:1 v/v), vortexing speed (9), vortexing duration (60 seconds), concentration of PVA in hardening bath (0.8% w/v), stirring speed of hardening bath (1200 rpm) and solvent evaporation duration (24 hours) resulted in the lowest mean particle size of 23.51 μm which was predicted and confirmed by the L18 array. A comparable size was demonstrated during the fabrication of BSA-incorporated microparticles. Taguchi OA design proved to be a valuable tool in determining the combination of process parameters that can provide the optimal condition for microparticle formulation. Taguchi OA design can be used to correctly predict the size of microparticles fabricated by the single emulsion process and can therefore, ultimately, save time and costs during the manufacturing process of drug delivery formulations by minimising experimental runs.

The aim of this work was to compare alginate and pectin beads for improving the survival of Lactobacillus plantarum and Bifidobacterium longum during storage in pomegranate and cranberry juice, and to evaluate the influence of various coating materials, including chitosan, gelatin and glucomannan on cell survival and on the size and hardness of the beads. In pomegranate juice, free cells of L. plantarum died within 4 weeks of storage and those of B. longum within 1 week; in cranberry juice both types of cells died within one week. Encapsulation within either alginate or pectin beads improved cell survival considerably, but coating of the beads with chitosan or gelatin improved it even further; coating with glucomannan did not have any positive effect. The double gelatin coated pectin beads gave the highest protection among all types of beads, as a final concentration of approximately 108 CFU/mL and 106 CFU/mL for both L. plantarum and B. longum was obtained after 6 weeks of storage in pomegranate and cranberry juice, respectively. The good protection could be attributed to the very strong interaction between the two polymers, as measured by turbidity experiments, leading to the formation of a polyelectrolyte complex. It was also shown that the coating was able to inhibit the penetration of gallic acid within the beads, which was used in this study as a model phenolic compound with antimicrobial activity; this is a likely mechanism through which the beads were able to protect the cells from the antimicrobial activity of phenolic compounds present in both types of juices. Despite their good protective effect, the pectin beads were considerably softer than the alginate beads, an issue that should be addressed in order to increase their mechanical stability.

The oral administration of probiotic bacteria has shown potential in clinical trials for the alleviation of specific disorders of the gastrointestinal tract. However, cells must be alive in order to exert these benefits. The low pH of the stomach can greatly reduce the number of viable microorganisms that reach the intestine, thereby reducing the efficacy of the administration. Herein, a model probiotic, Bifidobacterium breve, has been encapsulated into an alginate matrix before coating in multilayers of alternating alginate and chitosan. The intention of this formulation was to improve the survival of B. breve during exposure to low pH and to target the delivery of the cells to the intestine. The material properties were first characterized before in vitro testing. Biacore™ experiments allowed for the polymer interactions to be confirmed; additionally, the stability of these multilayers to buffers simulating the pH of the gastrointestinal tract was demonstrated. Texture analysis was used to monitor changes in the gel strength during preparation, showing a weakening of the matrices during coating as a result of calcium ion sequestration. The build-up of multilayers was confirmed by confocal laser-scanning microscopy, which also showed the increase in the thickness of coat over time. During exposure to in vitro gastric conditions, an increase in viability from

An immobilization system constituted by coated microcapsules was developed aiming at immobilizing probiotic bacteria capable of producing folate and release it in a sustained manner into the intestine. Despite no probiotic folate-producers have been immobilized so far, the system has been developed with this goal and this work reports its stability and ability to release folate under gastro-intestinal conditions. Microcapsules were made of alginate with three consecutive coatings of poly-l-lysine, sodium alginate and chitosan. Turbidity experiments showed a strong electrostatic interaction between these polymers. Fourier transform infrared spectroscopy (FTIR) and confocal analysis showed the stability of the coating materials when applied on the microcapsules, even after they were immersed in solutions simulating conditions in the stomach and small intestine (i.e. pH 2, 60 min and pH 7.2, 120 min, respectively). Coated microcapsules have an average diameter size ranged from 20 and 40 ?m, and swelled upon exposure to a neutral medium, without dissolution as showed by microscopy analyses. Release experiments proved the ability of the coated microcapsules to release folic acid, at different rates, depending on the applied coating. Release experiments showed that the first coating (?-PLL) is characterized by Fickian diffusion as the main release mechanism of folic acid. Fickian rate constant (kF) decreased with the number of consequent coatings, reflecting the decrease of predominance of Fick's behavior. Results showed that the developed coated microcapsules have suitable characteristics for encapsulation of folic acid aiming in situ release in the intestine., The authors Philippe E. Ramos and Ana I. Bourbon, are recipient of fellowships from the Fundacão para a Ciência e Tecnologia, POPH-QREN and FSE (FCT, Portugal) through grants, SFRH/BD/80800/2012, SFRH/BD/73178/ 2010, respectively. The authors thank the FCT Strategic Project PEst-OE/EQB/ LA0023/2013 and the project “BioInd—Biotechnology and Bioengineering for improved Industrial and Agro-Food processes”, REF. NORTE-07-0124- FEDER-000028 co-funded by the Programa Operacional Regional do Norte (ON.2–O Novo Norte), QREN, FEDER. The authors would like to acknowledge to Graham Luke from Hopkins and Philip Lyle Microscopy Facilities (University of Reading) for assistance on confocal analysis. The authors also thank COST FA1001 and the European Network for Gastrointestinal Health Research (ENGIHR).

This work studied the effect of multi-layer coating of alginate beads on the survival of encapsulated Lactobacillus plantarum in simulated gastric solution and during storage in pomegranate juice at 4 °C. Uncoated, single and double chitosan coated beads were examined. The survival of the cells in simulated gastric solution (pH 1.5) was improved in the case of the chitosan coated beads by 0.5–2 logs compared to the uncoated beads. The cell concentration in pomegranate juice after six weeks of storage was higher than 5.5 log CFU/mL for single and double coated beads, whereas for free cells and uncoated beads the cells died after 4 weeks of storage. In simulated gastric solution, the size of the beads decreased and their hardness increased with time; however, the opposite trend was observed for pomegranate juice, indicating that there is no correlation between cell survival and the hardness of the beads.

This study investigates the production of alginate microcapsules, which have been coated with the polysaccharide chitosan, and evaluates some of their properties with the intention of improving the gastrointestinal viability of a probiotic ( Bifidobacterium breve ) by encapsulation in this system. The microcapsules were dried by a variety of methods, and the most suitable was chosen. The work described in this Article is the first report detailing the effects of drying on the properties of these microcapsules and the viability of the bacteria within relative to wet microcapsules. The pH range over which chitosan and alginate form polyelectrolyte complexes was explored by spectrophotometry, and this extended into swelling studies on the microcapsules over a range of pHs associated with the gastrointestinal tract. It was shown that chitosan stabilizes the alginate microcapsules at pHs above 3, extending the stability of the capsules under these conditions. The effect of chitosan exposure time on the coating thickness was investigated for the first time by confocal laser scanning microscopy, and its penetration into the alginate matrix was shown to be particularly slow. Coating with chitosan was found to increase the survival of B. breve in simulated gastric fluid as well as prolong its release upon exposure to intestinal pH.

Glycopolymer hydrogels capable of mimicking mucosal tissue in mucoadhesion testing have been designed. Liquid formulations containing mucoadhesive polymers were found to be retained on these tissues to the same extent as ex vivo gastric mucosa, when using a dynamic method of assessing mucoadhesion.

The oral consumption of probiotic bacteria has become a popular method of improving gut health. However, a large number of potentially probiotic strains are too acid sensitive to survive passage through the gastrointestinal tract, or storage in foods. A popular method of protecting these cells, thereby improving a supplement's efficacy, is by microencapsulation into hydrogels based on the ionic gelation of alginates. The majority of work concerning the use of hydrogels in cell-based therapies involves the study of eukaryotes, and the use of prokaryotic cells, such as probiotics, requires different considerations to be made. Described within this chapter is a description of the development of alginate microencapsulation, its adaptation, and demonstrations of its efficacy in protecting live probiotic cells.

High protein dairy beverages are considered to be mouth drying. The drying sensation may be due to the product protein content; however the mechanism of this mouth drying is uncertain. This study investigated the potential adhesion of milk proteins to porcine oral mucosa in vitro. Purified casein and β-lactoglobulin were fluorescently labelled, placed on porcine oral mucosal tissues and their resistance to wash out with simulated saliva was monitored using fluorescence microscopy. Casein was found to be more adhesive to porcine mucosa than β-lactoglobulin. Some investigation into the reason for this difference in mucoadhesion was conducted by thiol-content analysis, rheology and zeta-potential measurements. The higher viscosity of casein solution and smaller zeta-potential is believed to be responsible for its better retention on mucosal surfaces. These findings suggest that casein and whey protein are both capable of binding and eliciting mouth drying in high protein dairy beverages.

If acid-sensitive drugs or cells are administered orally, there is often a reduction in efficacy associated with gastric passage. Formulation into a polymer matrix is a potential method to improve their stability. The visualization of pH within these materials may help better understand the action of these polymer systems and allow comparison of different formulations. We herein describe the development of a novel confocal laser-scanning microscopy (CLSM) method for visualizing pH changes within polymer matrices and demonstrate its applicability to an enteric formulation based on chitosan-coated alginate gels. The system in question is first shown to protect an acid-sensitive bacterial strain to low pH, before being studied by our technique. Prior to this study, it has been claimed that protection by these materials is a result of buffering, but this has not been demonstrated. The visualization of pH within these matrices during exposure to a pH 2.0 simulated gastric solution showed an encroachment of acid from the periphery of the capsule, and a persistence of pHs above 2.0 within the matrix. This implies that the protective effect of the alginate-chitosan matrices is most likely due to a combination of buffering of acid as it enters the polymer matrix and the slowing of acid penetration.

The administration of probiotic bacteria as nutraceuticals is an area that has rapidly expanded in recent years, with a global market worth $32.6 billion predicted by 2014. Many of the health promoting claims attributed to these bacteria are dependent on the cells being both viable and sufficiently numerous in the intestinal tract. The oral administration of most bacteria results in a large loss of viability associated with passage through the stomach, which is attributed to the high acid and bile salt concentrations present. This loss of viability effectively lowers the efficacy of the administered supplement. The formulation of these probiotics into microcapsules is an emerging method to reduce cell death during GI passage, as well as an opportunity to control release of these cells across the intestinal tract. The majority of this technology is based on the immobilization of bacteria into a polymer matrix, which retains its structure in the stomach before degrading and dissolving in the intestine, unlike the diffusion based unloading of most controlled release devices for small molecules. This review shall provide an overview of progress in this field as well as draw attention to areas where studies have fallen short. This will be followed by a discussion of emerging trends in the field, highlighting key areas in which further research is necessary.