Search

Polyolefins might become inexpensive alternatives to the existing membranes based on polyethersulfone. Here, we disclose the production of retortable, well-defined polypropylene (PP)-based nanoporous films derived from amphiphilic graft copolymer precursors. The graft copolymers, containing a polypropylene backbone and polyester grafts, were obtained by grafting lactones, specifically delta-valerolactone and epsilon- caprolactone, from well-defined randomly functionalized poly(propylene-co-10-undecen-1-ol) as a macroinitiator. Depending on the composition, the graft copolymers self-assemble into droplet, cylindrical, lamellar, or interconnected two-phase morphologies. Functional mesoporous iPP-based films were fabricated by the selective degradation of the polyester blocks of the copolymers. Their structure and morphology were studied using atomic force microscopy (AFM), scanning electron microscopy (SEM), small-angle X-ray scattering (SAXS), and solid-state NMR, while the mesoporosity was assessed by nitrogen sorption experiments. The pore size of the films is strongly influenced not only by the volume fraction of the copolymer blocks but unexpectedly also by the topology (i.e., number of grafts) of the graft copolymer, as was confirmed by computational modeling studies using the dynamic density functional theory (DDFT) engine within the Culgi software. This work provides a conclusive answer on how the morphology of iPP-based graft copolymers is tuned by the copolymer composition and the amount and length of the grafted polyester blocks. Filtration tests and flux determination demonstrated that such structurally well-defined mesoporous products could be considered for the development of ultrafiltration membranes while the chemical resistance and sterilization tests revealed their robust performance and suitability for water purification applications.

The magnesium-rich intermetallic compounds RE 3Ag4Mg12 (RE = Y, La–Nd, Sm–Dy, Yb) and AE 3Ag4Mg12 (AE = Ca, Sr) were synthesized from the elements in sealed tantalum ampoules through heat treatment in an induction furnace. X-ray powder diffraction studies confirm the hexagonal Gd3Ru4Al12 type structure, space group P63/mmc. Three structures were refined from single crystal X-ray diffractometer data: a = 973.47(5), c = 1037.19(5) pm, wR2 = 0.0296, 660 F 2 values, 30 variables for Gd3Ag3.82(1)Mg12.18(1), a = 985.27(9), c = 1047.34(9) pm, wR2 = 0.0367, 716 F 2 values, 29 variables for Yb3Ag3.73(1)Mg12.27(1) and a = 992.41(8), c = 1050.41(8) pm, wR2 = 0.0373, 347 F 2 values, 28 variables for Ca3Ag3.63(1)Mg12.37(1). Refinements of the occupancy parameters revealed substantial Ag/Mg mixing within the silver-magnesium substructure, a consequence of the Ag@Mg8 coordination. The alkaline earth and rare earth atoms build Kagome networks. Temperature dependent magnetic susceptibility measurements indicate diamagnetism/Pauli paramagnetism for the compounds with Ca, Sr, Y and YbII, while the others with the trivalent rare earth elements are Curie-Weiss paramagnets. Most compounds order antiferromagnetically at T N = 4.4(1) K (RE = Pr), 34.6(1) K (RE = Gd) and 23.5(1) K (RE = Tb) while Eu3Ag4Mg12 is a ferromagnet (T C = 19.1(1) K). 151Eu Mössbauer spectra confirm divalent europium (δ = −9.88(1) mm s−1). Full magnetic hyperfine field splitting (18.4(1) T) is observed at 6 K. Yb3Ag4Mg12 shows a single resonance in its 171Yb solid state NMR spectrum at 6991 ppm at 300 K indicating a strong, positive Knight shift.

Strong compositional influences are known to affect the ionic transport within the thio-LISICON family, however, a deeper understanding of the resulting structure - transport correlations have up until now been lacking. Employing a combination of high-resolution neutron diffraction, impedance spectroscopy and nuclear magnetic resonance spectroscopy, together with bond valence site energy calculations and the maximum entropy method for determining the underlying Li+ scattering density distribution of a crystal structure, this work assesses the impact of the Li+ substructure and charge carrier density on the ionic transport within the Li4-xGe1-xSbxS4 substitution series. By incorporating Sb5+ into Li4GeS4, an anisometric expansion of the unit cell is observed. An additional Li+ position is found as soon as (SbS4)3− polyhedra are present, leading to a better local polyhedral connectivity and a higher disorder in the Li+ substructure. Here, we are able to relate structural disorder to an increase in configurational entropy, together with a two order-of-magnitude increase in ionic conductivity. This result reinforces the typically believed paradigm that structural disorder leads to improvements in ionic transport.

The NHC-stabilized boraalkene reacts with nitrosobenzene to give a [2+2] cycloaddition product plus a pair of persistent borylnitroxide radicals. These are thought to be formed by means of a bora nitroso ene reaction followed by H-atom transfer.

Graphene nanoribbons (GNRs) are considered as potential candidates for next-generation electronic materials, and chemical functionalization can be an efficient method to modulate their electronic properties. This work presents a solution synthesis of methoxy-substituted GNRs through the Diels-Alder polymerization of a tetraphenylcyclopentadienone-based monomer bearing four methoxy groups, followed by oxidative cyclodehydrogenation. The methoxy-functionalization of the GNRs was unambiguously validated by FTIR and solid-state NMR analyses. Moreover, theoretical studies by ab initio calculations predicted both charge redistribution and structural distortion induced by the methoxy substitution, revealing reduction of both the bandgap and of the effective mass of charge carriers. Employing THz spectroscopy, we found that methoxy-substitution at the edges enhanced the photoconductivity of GNRs by a factor of ~25%, primarily due to the reduced charge effective mass.

The metal-rich phosphide TaCrP forms from the elements by step-wise solid state reaction in an alumina crucible (maximum annealing temperature 1180 K). TaCrP is trimorphic. The structural data of the hexagonal ZrNiAl high-temperature phase (space group P 6 ‾ 2 m $P\overline{6}2m$ ) was deduced from a Rietveld refinement. At room temperature TaCrP crystallizes with the TiNiSi type (Pnma, a = 623.86(5), b = 349.12(3), c = 736.78(6) pm, wR = 0.0419, 401 F 2 values, 20 variables) and shows a Peierls type transition below ca. 280 K to the monoclinic low-temperature modification (P121/c1, a = 630.09(3), b = 740.3(4), c = 928.94(4) pm, β = 132.589(5)°, wR = 0.0580, 1378 F 2 values, 57 variables). The latter phase transition is driven by pairwise Cr–Cr bond formation out of an equidistant chain in o-TaCrP. The phase transition was monitored via different analytical tools: differential scanning calorimetry, powder synchrotron X-ray diffraction, magnetic susceptibility measurements and 31P solid state NMR spectroscopy.

Aliovalent substitution is a common strategy to improve the ionic conductivity of solid electrolytes for solid-state batteries. The substitution of SbS43– by WS42– in Na2.9Sb0.9W0.1S4 leads to a very high ionic conductivity of 41 mS cm–1 at room temperature. While pristine Na3SbS4 crystallizes in a tetragonal structure, the substituted Na2.9Sb0.9W0.1S4 crystallizes in a cubic phase at room temperature based on its X-ray diffractogram. Here, we show by performing pair distribution function analyses and static single-pulse 121Sb NMR experiments that the short-range order of Na2.9Sb0.9W0.1S4 remains tetragonal despite the change in the Bragg diffraction pattern. Temperature-dependent Raman spectroscopy revealed that changed lattice dynamics due to the increased disorder in the Na+ substructure leads to dynamic sampling causing the discrepancy in local and average structure. While showing no differences in the local structure, compared to pristine Na3SbS4, quasi-elastic neutron scattering and solid-state 23Na nuclear magnetic resonance measurements revealed drastically improved Na+ diffusivity and decreased activation energies for Na2.9Sb0.9W0.1S4. The obtained diffusion coefficients are in very good agreement with theoretical values and long-range transport measured by impedance spectroscopy. This work demonstrates the importance of studying the local structure of ionic conductors to fully understand their transport mechanisms, a prerequisite for the development of faster ionic conductors.

Structurally precision graphene nanoribbons (GNRs) are promising candidates for next-generation nanoelectronics due to their intriguing and tunable electronic structures. GNRs with hybrid edge structures often confer them unique geometries associated with exotic physicochemical properties. Herein, a novel type of cove-edged GNRs with periodic short zigzag-edge segments is demonstrated. The bandgap of this GNR family can be tuned using an interplay between the length of the zigzag segments and the distance of two adjacent cove units along the opposite edges, which can be converted from semiconducting to nearly metallic. A family member with periodic cove-zigzag edges based on N = 6 zigzag-edged GNR, namely 6-CZGNR-(2,1), is successfully synthesized in solution through the Scholl reaction of a unique snakelike polymer precursor (10) that is achieved by the Yamamoto coupling of a structurally flexible S-shaped phenanthrene-based monomer (1). The efficiency of cyclodehydrogenation of polymer 10 toward 6-CZGNR-(2,1) is validated by FT-IR, Raman, and UV-vis spectroscopies, as well as by the study of two representative model compounds (2 and 3). Remarkably, the resultant 6-CZGNR-(2,1) exhibits an extended and broad absorption in the near-infrared region with a record narrow optical bandgap of 0.99 eV among the reported solution-synthesized GNRs. Moreover, 6-CZGNR-(2,1) exhibits a high macroscopic carrier mobility of ∼20 cm2 V-1 s-1 determined by terahertz spectroscopy, primarily due to the intrinsically small effective mass (m*e = m*h = 0.17 m0), rendering this GNR a promising candidate for nanoelectronics. ispartof: JOURNAL OF THE AMERICAN CHEMICAL SOCIETY vol:144 issue:1 pages:228-235 ispartof: location:United States status: published

The bicyclic amido-substituted silicon(I) ring compound Si4 {N(SiMe3 )Mes}4 2 (Mes=Mesityl=2,4,6-Me3 C6 H2 ) features enhanced zwitterionic character and different reactivity from the analogous compound Si4 {N(SiMe3 )Dipp}4 1 (Dipp=2,6-i Pr2 C6 H3 ) due to the smaller mesityl substituents. In a reaction with the N-heterocyclic carbene NHC Me4 (1,3,4,5-tetramethyl-imidazol-2-ylidene), we observe adduct formation to give Si4 {N(SiMe3 )Mes}4 ⋅ NHC Me4 (3). This adduct reacts further with the Lewis acid BH3 to yield the Lewis acid-base complex Si4 {N(SiMe3 )Mes}4 ⋅ NHC Me4 ⋅ BH3 (4). Coordination of AlBr3 to 2 leads to the adduct 5. Calculated proton affinities and fluoride ion affinities reveal highly Lewis basic and very weak Lewis acidic character of the low-valent silicon atoms in 1 and 2. This is confirmed by protonation of 1 and 2 with Brookharts acid yielding 6 and 7. Reaction with diphenylacetylene only occurs at 111 °C with 2 in toluene and is accompanied by fragmentation of 2 to afford the silacyclopropene 8 and the trisilanorbornadiene species 9.

Lithium alloying materials are promising candidates to replace the current intercalation-type graphite negative electrode materials in lithium-ion batteries (LIBs) due to their high specific capacity and relatively low cost. Here, we investigate the electrochemical performance of TiSnSb regarding its charge/discharge cycling stability as a negative electrode material in LIB cells. To assess a more practical performance with respect to a limited active lithium content in LIB full-cells, we evaluate the impact of pre-lithiation for TiSnSb with respect to the cycling stability in a NCM111||TiSnSb cell setup. The observation of the individual electrode potentials reveals comprehensive insights into the ongoing cell chemistry, showing that clear performance improvements can be achieved via pre-lithiation. Furthermore, the lithiation mechanism of TiSnSb is systematically studied via ex situ7Li magic-angle spinning (MAS) nuclear magnetic resonance (NMR), ex situ X-ray diffraction, and static ex situ119Sn wideband uniform rate smooth truncation Carr–Purcell Meiboom–Gill (CPMG) WCPMG NMR experiments. For comprehensive references regarding the isotropic 7Li shift of the Li–Sb intermetallic phases, all thermodynamically stable Li–Sb intermetallics of the binary Li–Sb systems have been synthesized and subsequently characterized by 7Li MAS NMR. Combined, our measurements for lithiated TiSnSb do not give any evidence for the formation of Li–Sn and Li–Sb intermetallics related to crystalline bulk phases (Li7Sn3, Li7Sn2, Li3Sb, and Li2Sb) as has been previously reported. In contrast, unique insights obtained from static ex situ119Sn WCPMG NMR and ex situ XRD measurements reveal the formation of ternary Li–Sb–Sn species during lithiation, which can be assigned to the intermetallic phase Li2.8SbSn0.2. Additionally, the 7Li MAS NMR measurements combined with the observed discharge capacity reveal a second Li species, which we assign to an amorphous Li–Sn phase.

The synthesis and characterization of the bis(η6 -benzene)lithium cation, the benzene metallocene of the lightest metal, is reported. The boron compound FmesBCl2 [Fmes: 2,4,6-tris(trifluoromethyl)phenyl] reacted with three molar equivalents of the lithio-acetylene reagent Li-C≡C-Fmxyl [Fmxyl: 3,5-bis(trifluoromethyl)phenyl]. Subsequent crystallization from benzene gave the [bis(η6 -benzene)Li]+ cation with the [{FmesB(-C≡C-Fmxyl)3 }2 Li]- anion. This parent [(arene)2 Li]+ cation shows an eclipsed arrangement of the pair of benzene ligands at the central lithium cation with uniform carbon-lithium bond lengths. The corresponding [(η6 -toluene)2 Li]+ and [(η6 -durene)2 Li]+ containing salts were similarly prepared. The bis(arene)lithium cations were characterized by X-ray diffraction, by solid-state 7 Li MAS NMR spectroscopy and their bonding features were analyzed by DFT calculations.

The first comprehensive solid‐state nuclear magnetic resonance (NMR) characterization of geminal alane‐phosphane frustrated Lewis pairs (Al/P FLPs) is reported. Their relevant NMR parameters (isotropic chemical shifts, direct and indirect 27Al‐31P spin‐spin coupling constants, and 27Al nuclear electric quadrupole coupling tensor components) have been determined by numerical analysis of the experimental NMR line shapes and compared with values computed from the known crystal structures by using density functional theory (DFT) methods. Our work demonstrates that the 31P NMR chemical shifts for the studied Al/P FLPs are very sensitive to slight structural inequivalences. The 27Al NMR central transition signals are spread out over a broad frequency range (>200 kHz), owing to the presence of strong nuclear electric quadrupolar interactions that can be well‐reproduced by the static 27Al wideband uniform rate smooth truncation (WURST) Carr‐Purcell‐Meiboom‐Gill (WCPMG) NMR experiment. 27Al chemical shifts and quadrupole tensor components offer a facile and clear distinction between three‐ and four‐coordinate aluminum environments. For measuring internuclear Al⋅⋅⋅P distances a new resonance‐echo saturation‐pulse double‐resonance (RESPDOR) experiment was developed by using efficient saturation via frequency‐swept WURST pulses. The successful implementation of this widely applicable technique indicates that internuclear Al⋅⋅⋅P distances in these compounds can be measured within a precision of ±0.1 Å., The first comprehensive solid‐state NMR characterization of geminal alane‐phosphane frustrated lewis pairs (Al/P FLPs) is reported. For measuring internuclear Al⋅⋅⋅P distances a new resonance‐echo saturation‐pulse double‐resonance (RESPDOR) experiment was developed by using efficient saturation via frequency‐swept wideband uniform rate smooth truncation (WURST) pulses. By using this widely applicable technique, Al⋅⋅⋅P distances in these compounds can be measured within a precision of ±0.1 Å.

Lithium metal batteries are gaining increasing attention due to their potential for significantly higher theoretical energy density than conventional lithium ion batteries. Here, we present a novel mechanochemical modification method for lithium metal anodes, involving roll-pressing the lithium metal foil in contact with ionic liquid-based solutions, enabling the formation of an artificial solid electrolyte interphase with favorable properties such as an improved lithium ion transport and, most importantly, the suppression of dendrite growth, allowing homogeneous electrodeposition/-dissolution using conventional and highly conductive room temperature alkyl carbonate-based electrolytes. As a result, stable cycling in symmetrical Li∥Li cells is achieved even at a high current density of 10 mA cm–2. Furthermore, the rate capability and the capacity retention in NMC∥Li cells are significantly improved.

Recent years have witnessed the development of solid-state NMR techniques that allow the direct investigation of extremely wide inhomogeneously broadened resonance lines. To date, this typically involves the application of frequency sweeps as offered by wideband uniform rate smooth truncation (WURST) pulses. While the effects of such advanced irradiation schemes on static samples are well understood, the interference between the varying carrier frequency and the time-dependent evolution of the spin system under magic-angle spinning (MAS) conditions is more complex. Herein, we introduce the well-known WURST-Carr-Purcell-Meiboom-Gill (WCPMG) pulse sequence for spinning samples. Using numerical spin-density matrix analysis, an ideal design based on fast frequency sweeps and high truncation of the incorporated WURST pulses is presented that enables uniform excitation/refocusing under MAS conditions with low-to-moderate radio-frequency power requirements. This permits the acquisition of ultra-wideline MAS NMR lines exceeding 500 kHz with chemical shift resolution in a single transmitter step.

We report the 119Sn and 7Li solid-state nuclear magnetic resonance (NMR) spectroscopic characterization of all thermodynamically stable intermetallic phases of the binary Li–Sn system. The isotropi...

The combination of computational methods and advanced characterization techniques is used to highlight the role of the intramolecular hydrogen bond in thienyldiketopyrrolopyrrole (ThDPPTh) copolyme...

The extra-large pore zeolite SSZ-59 was prepared with highly ordered Al atoms in T6 positions within the double-zigzag chains (dzc) running along the 14 MR channels. Narrow 1H MAS NMR signals of br...

Understanding the relationship between molecular design and packing modes constitutes one of the major challenges in self‐assembly and is essential for the preparation of functional materials. Herein, we have achieved high precision control over the supramolecular packing of amphiphilic PtII complexes by systematic variation of the hydrophilic side‐chain length. A novel approach of general applicability based on complementary X‐ray diffraction and solid‐state NMR spectroscopy has allowed us to establish a clear correlation between molecular features and supramolecular ordering. Systematically increasing the side‐chain length gradually increases the steric demand and reduces the extent of aromatic interactions, thereby inducing a gradual shift in the molecular packing from parallel to a long‐slipped organization. Notably, our findings highlight the necessity of advanced solid‐state NMR techniques to gain structural information for supramolecular systems where single‐crystal growth is not possible. Our work further demonstrates a new molecular design strategy to modulate aromatic interaction strengths and packing arrangements that could be useful for the engineering of functional materials based on PtII and aromatic molecules., X‐ray diffraction and advanced solid‐state NMR studies were combined as a new, general tool for detailed structural and supramolecular elucidation, using a series of amphiphilic PtII complexes as model compounds. Our approach provides an alternative for supramolecular systems where single‐crystal growth is not possible, which can be potentially applied to many other molecular and macromolecular platforms.

Binary antimonides of composition MSb (M = Al, Ga, In), RESb (RE = Sc, Y, La), CdSb, RE4Sb3 (RE = Sc, La), and T5Sb4 (T = Nb, Ta) as well as the pseudobinary solid solutions (La0.25M0.75)4Sb3 (M = ...

Light-responsive modulation of the longitudinal (T1) and transversal relaxation times of a fluorinated cyclodextrin has been achieved by host–guest complexation with arylazopyrazole-modified metal complexes in aqueous solution. This supramolecular concept can potentially be applied to the development of contrast agents for 19F magnetic resonance imaging (MRI).

The synthesis, photophysical characterization, and quantum chemical calculations of a series of benzotriazinyl radicals and their styryl radical trapping products are presented. The benzotriazinyl radicals are non-luminescent but surprisingly the corresponding styryl radical trapping products exhibit high fluorescence quantum yields (up to 60% in some cases), making them highly valuable probes or labels. Additionally, the influence of the substitution pattern on the optical properties of the radical trapping products was observed experimentally and interpreted by means of quantum chemical calculations. Specific substitution patterns showed a bathochromic shift compared to the unsubstituted compound. Computationally, it was shown that this substitution pattern leads to a stronger energetic stabilization of the lowest unoccupied molecular orbital than the highest occupied molecular orbital. Analysis of the influence of the substitution pattern on the optical properties showed a bathochromic shift in several examples, which was interpreted by means of quantum chemical calculations.

While the range of accessible borylenes has significantly broadened over the last decade, applications remain limited. Herein, we present tricoordinate oxy-borylenes as potent photoreductants that can be readily activated by visible light. Facile oxidation of CAAC stabilized oxy-borylenes (CAAC)(IPr

Hydrogen-bonded SiOH defects and Bronsted acidic bridging OH groups, defined as Bronsted acid sites (BAS), yield overlapping signals in 1H MAS NMR and FTIR spectroscopies. Here, a clear distinction...

Nests of three silanol groups are located on the internal pore surface of calcined zeolite SSZ‐70. 2D 1H double/triple‐quantum single‐quantum correlation NMR experiments enable a rigorous identification of these silanol triad nests. They reveal a close proximity to the structure directing agent (SDA), that is, N,N′‐diisobutyl imidazolium cations, in the as‐synthesized material, in which the defects are negatively charged (silanol dyad plus one charged SiO− siloxy group) for charge balance. It is inferred that ring strain prevents the condensation of silanol groups upon calcination and removal of the SDA to avoid energetically unfavorable three‐rings. In contrast, tetrad nests, created by boron extraction from B‐SSZ‐70 at various other locations, are not stable and silanol condensation occurs. Infrared spectroscopic investigations of adsorbed pyridine indicate an enhanced acidity of the silanol triads, suggesting important implications in catalysis., Silanol defects determine adsorption and catalysis in zeolites by their hydrophilic properties, but they can also contribute to catalytic reactions through their weak acidities or cooperative effects with other active sites. Well‐defined silanol defect clusters (see structure: cyan H, red O, black Si) with distinct size in topologically related zeolites, SSZ‐70 and ITQ‐1 are identified by NMR spectroscopy.

Bronsted acid sites (BAS) in dry aluminosilicate zeolites, also known as bridging OH–H groups, may form hydrogen bonds with other framework oxygen atoms, O, in addition to BAS that are free of such...

E/Z photo-isomerization of a new surfactant causes substantial changes in interfacial properties, which are a prerequisite for responsive and adaptive material control on a molecular level., Interfaces that can change their chemistry on demand have huge potential for applications and are prerequisites for responsive or adaptive materials. We report on the performance of a newly designed n-butyl-arylazopyrazole butyl sulfonate (butyl-AAP-C4S) surfactant that can change its structure at the air–water interface by E/Z photo-isomerization in an unprecedented way. Large and reversible changes in surface tension (Δγ = 27 mN m–1) and surface excess (ΔΓ > 2.9 μmol m–2) demonstrate superior performance of the butyl-AAP-C4S amphiphile to that of existing ionic surfactants. Neutron reflectometry and vibrational sum-frequency generation spectroscopy reveal that these large changes are caused by an unexpected monolayer-to-bilayer transition. This exceptional behavior is further shown to have dramatic consequences at larger length scales as highlighted by applications like the light-triggered collapse of aqueous foam which is tuned from high (>1 h) to low (

Lithium batteries with solid polymer electrolytes (SPEs) and

Next-generation thermal management requires the development of low lattice thermal conductivity materials, as observed in ionic conductors. For example, thermoelectric efficiency is increased when thermal conductivity is decreased. Detrimentally, high ionic conductivity leads to thermoelectric device degradation. Battery safety and design also require an understanding of thermal transport in ionic conductors. Ion mobility, structural complexity, and anharmonicity have been used to explain the thermal transport properties of ionic conductors. However, thermal and ionic transport are rarely discussed in direct comparison. Herein, the ionic conductivity of Ag+ argyrodites is found to change by orders of magnitude without altering the thermal conductivity. Thermal conductivity measurements and two-channel lattice dynamics modeling reveal that the majority of Ag+ vibrations have a non-propagating diffuson-like character, similar to amorphous materials. It is found that high ionic mobility is not a requirement for diffuson-mediated transport. Instead, the same bonding and structural traits that can lead to fast ionic conduction also lead to diffuson-mediated transport. Bridging the fields of solid-state ionics and thermal transport, it is proposed that a vibrational perspective can lead to new design strategies for functional ionic conducting materials. As a first step, the authors relate the so-called Meyer–Neldel behavior in ionic conductors to phonon occupations.

Lithium batteries with solid polymer electrolytes (SPEs) and mobile ions are prone to mass transport limitations, that is, concentration polarization, creating a concentration gradient with Li+-ion (and counter-anion) depletion toward the respective electrode, as can be electrochemically observed in, for example, symmetric Li||Li cells and confirmed by Sand and diffusion equations. The effect of immobile anions is systematically investigated in this work. Therefore, network-based SPEs are synthesized with either mobile (dual-ion conduction) or immobile anions (single-ion conduction) and proved via solvation tests and nuclear magnetic resonance spectroscopy. It is shown that the SPE with immobile anions does not suffer from concentration polarization, thus disagreeing with Sand and diffusion assumptions, consequently suggesting single-ion (Li+) transport via migration instead. Nevertheless, the practical relevance of single-ion conduction can be debated. Under practical conditions, that is, below the limiting current, the concentration polarization is generally not pronounced with DIC-based electrolytes, rendering the beneficial effect of SIC redundant and DIC a better choice due to better kinetical aspects under these conditions. Also, the observed dendritic Li in both electrolytes questions a relevant impact of mass transport on its formation, at least in SPEs.

Dual-graphite batteries (DGBs), which are based on anion intercalation into graphite positive electrodes, exhibit great potential for stationary energy storage due to use of more sustainable and low-cost electrode materials and processing routes. Binary-mixed highly concentrated electrolytes (HCEs) appeal highly suitable for the high operating voltages of DGBs, although the lack of sufficient insights into the formation of graphite intercalation compounds (GICs) limits the cell performance in terms of specific capacity and lifetime so far. Herein, anion intercalation from single-salt HCEs (LiPF6 and LiBF4) and an equimolar binary mixture of LiPF6/LiBF4 are studied in graphite || Li metal cells, revealing an improved performance in terms of specific capacity and Coulombic efficiency in the order LiPF6 > LiPF6/LiBF4 > LiBF4. LiBF4-based cells exhibit an increased onset potential for anion intercalation and higher area specific impedance, suggesting an ineffective interphase formation at graphite. X-ray diffraction reveals GIC formation, while a lower stage number is achieved for the LiBF4-based HCE. 19F MAS NMR spectroscopy analysis at various states-of-charge confirms no significant charge transfer between the intercalated anions and the graphite host and suggest preferred intercalation of PF6- compared to BF4- as well as a high translational and/or rotational mobility of the intercalated anions.

Ultra-low lattice thermal conductivity as often found in superionic compounds is greatly beneficial for thermoelectric performance, however, a high ionic conductivity can lead to device degradation. Conversely, high ionic conductivities are searched for materials in solid-state battery applications. It is commonly thought that ionic transport induces low thermal conductivity and that ion and thermal transport are not completely independent properties of a material. However, no direct comparison or underlying physical relationship has been shown between the two. Here we establish that ionic transport can be varied independent of thermal transport in Ag+ superionic conductors, even though both phenomena arise from atomic vibrations. Thermal conductivity measurements, in conjunction with two-channel lattice dynamics modeling, reveals that the vast majority of Ag+ vibrations have non-propagating diffuson-like character, which provides a rational for how these two transport properties can be independent. Our results provide conceptually novel lattice dynamical insights to ionic transport and confirm that ion transport is not a requirement for ultra-low thermal conductivity. Consequently, this work bridges the fields of solid state ionics and thermal transport, thus providing design strategies for functional ionic conducting materials from a vibrational perspective.

The synthesis and characterization of the bis(η

The zeolite catalyst SSZ-42 shows a remarkable high abundance (≈80 %) of hydrogen-bonded Bronsted acid sites (BAS), which are deshielded from the 1 H chemical shift of unperturbed BAS at typically 4 ppm. This is due to their interaction with neighboring oxygen atoms in the zeolite framework when oxygen alignments are suitable. The classification and diversity of hydrogen bonding is assessed by DFT calculations, showing that oval-shaped 6-rings and 5-rings allow for a stronger hydrogen bond to oxygen atoms on the opposite ring side, yielding higher experimental chemical shifts (δ (1 H)=6.4 ppm), than circular 6-rings (δ(1 H)=5.2 ppm). Cage-like structures and intra-tetrahedral interactions can also form hydrogen bonds. The alignment of oxygen atoms is expected to impact their role in the stabilization of intermediates in catalytic reactions, such as surface alkoxy groups and possibly transition states.

Controlling the nanoscale morphology in assemblies of π-conjugated molecules is key to developing supramolecular functional materials. Here, we report an unsymmetrically substituted amphiphilic PtII complex 1 that shows unique self-assembly behavior in nonpolar media, providing two competing anti-cooperative and cooperative pathways with distinct molecular arrangement (long- vs. medium-slipped, respectively) and nanoscale morphology (discs vs. fibers, respectively). With a thermodynamic model, we unravel the competition between the anti-cooperative and cooperative pathways: buffering of monomers into small-sized, anti-cooperative species affects the formation of elongated assemblies, which might open up new strategies for pathway control in self-assembly. Our findings reveal that side-chain immiscibility is an efficient method to control anti-cooperative assemblies and pathway complexity in general.

In this Communication, we report the first synthesis of structurally well-defined graphene nanoribbons (GNRs) functionalized with dendritic polymers. The resultant GNRs possess grafting ratios of 0.59-0.68 for the dendrons of different generations. Remarkably, the precise 3D branched conformation of the grafted dendrons affords the GNRs unprecedented 1D supramolecular self-assembly behavior in tetrahydrofuran (THF), yielding nanowires, helices and nanofibers depending on the dimension of the dendrons. The GNR superstructures in THF exhibit near-infrared absorption with maxima between 650 and 700 nm, yielding an optical bandgap of 1.2-1.3 eV. Ultrafast photoconductivity analyses unveil that the helical structures exhibit the longest free carrier (3.5 ps) and exciton lifetime (several hundred ps) among the three superstructure systems. This study opens pathways for tunable construction of ordered GNR superstructures with promising optoelectronic applications. ispartof: JOURNAL OF THE AMERICAN CHEMICAL SOCIETY vol:141 issue:28 pages:10972-10977 ispartof: location:United States status: published