Search

Bone tissue engineering (BTE) is a biomedical area that develops scaffolds capable of mimicking and repairing damage on bone tissue. For this, a popular and nonexpensive 3D printing technique named fused deposition modeling (FDM) has been used. The potential use of 3D scaffolds of poly(butylene adipate-co-terephthalate (PBAT) has been investigated in BTE since this polymer presents good biocompatibility and degradability, as well as mechanical properties like those offered by the natural bone. A single material does not have the features to promote cell adhesion, proliferation, and differentiation; the incorporation of bioactive substances can overcome this issue. This work aimed to develop 3D printed PBAT scaffolds by FDM technique and coated them with hydroxyapatite (H), bioglass (B), and gelatin (G) by solution immersion technique to obtain a functional biomaterial to be applied on the BTE. Structural characteristics and morphological and mechanical properties of the 3D scaffolds were evaluated. The cell proliferation and mineralization of pre-osteoblastic cells (MC3T3-E1) were accessed by methylthiazolyldiphenyl-tetrazolium bromide, sulphorodhamine B, and Alizarin red assay, respectively. 3D printed PBAT scaffolds were successfully obtained by FDM, and the surface modification of 3D PBAT was proven through the changes observed in structural and morphological characteristics. In addition, the mechanical properties were improved in the modified scaffolds. Also, the coated 3D PBAT scaffolds with any bioactive substance increased and promoted cell proliferation and pre-osteoblastic differentiation. Therefore, the combination of 3D PBAT scaffolds and H, G, and/or B (doped with niobium) is an alternative to produce functional biomaterials for BTE. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Clinical Dentistry & Research is the property of Dental Press International and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Aim: This study analyzed public procurements for different endodontic materials used in the Brazilian public health system and evaluated the variables related to their cost. Methods: A time-series study was performed by screening materials for endodontic application in the public Brazilian Databank of Healthcare Prices from 2010 to 2019. Data were categorized according to material composition and clinical application. The collated variables were used in a multiple linear regression model to predict the impact of unit price in procurement processes. Results: A total of 5,973 procurement processes (1,524,693 items) were evaluated. Calcium hydroxides were found in 79% of the observations (4,669 processes). Prices drop each year by US$1.87 while MTAs and epoxy resins are increasingly purchased at higher prices (US$50.87; US$67.69, respectively). The microregion, the procurement modality, and the type of institution had no influence on unit prices in the adjusted model (p > 0.05). Conclusions: Calcium hydroxide-based materials were the cheapest and most frequently purchased endodontic materials in the public health care system. Novel formulations are being implemented into clinical practice over time and their cost may be a barrier to the broad application of materials such as MTAs, despite their effectiveness. [ABSTRACT FROM AUTHOR]

Copyright of Revista Kiru is the property of Universidad de San Martin de Porres and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The aim of this study was to evaluate the influence of different calcium phosphates (CaPs) on the physical, biological, and remineralizing properties of experimental resin-based sealants (RBSs). Triethylene-glycol dimethacrylate (90wt%) and bisphenol A-glycidyl methacrylate (10wt%) were used to produce resin-based sealants. Hydroxyapatite (SHAp), α-tricalcium phosphate (Sα-TCP) and octacalcium phosphate (SOCP) were added to the sealants in a 10wt% concentration. One group without CaPs was used as the control group (SCG). The degree of conversion (DC) was assessed with Fourier-transformed infrared spectroscopy, whereas cytotoxicity was tested with the HaCaT keratinocyte cell line. The ultimate tensile strength (UTS) was used to assess the mechanical strength of the experimental RBSs. Sealed enamel was used for colorimetric assay. Mineral deposition was assessed with Raman spectroscopy after 7, 14, and 28 days of sample immersion in artificial saliva. Scanning electron microscopy was used to analyze the surface morphology after 28 days of immersion. The addition of 10wt% of fillers significantly reduced the DC of sealants. SOCP groups showed reduced cell viability. Higher UTS was found for Sα-TCP a nd SHAp. The color analysis showed that SGC and demineralized teeth presented higher mismatches with the sound tissue. Mineral deposition was observed for SHAp a nd S α-TCP after 7 days, with increased phosphate content and mineral deposits for SHAp after 28 days. RBS with the addition of 10% HAp promoted increased mineralization in vitro after 28 days, and did not affect cell viability, DC, mechanical properties, or RBS color in the enamel. [ABSTRACT FROM AUTHOR]

Copyright of Revista Odonto Ciencia is the property of EDIPUCRS - Editora Universitaria da PUCRS and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)