Search

Strategies to design multifunctional interfaces for biosensors have been extensively investigated to acquire optimal sensitivity, specificity, and accuracy. However, heterogeneous ingredients in clinical samples inevitably generate background signals, exposing challenges in biosensor performance. Polymer coating has been recognized as a crucial method to functionalize biointerfaces by providing tailored properties that are essential for interacting with biological systems. Herein, we introduce for the first time two oligomeric silatranes, MPS-MPC n and MPS-PEGMACOOH m , which were copolymerized from mercaptopropylsilatrane (MPS) with either zwitterionic monomer 2-methacryloyloxyethyl phosphorylcholine (MPC) or carboxylated poly(ethylene glycol) methacrylate (PEGMACOOH) through thiol-ene polymerization. These oligomeric silatranes were prepared individually and in combinations in acidic and nonacid solvents for deposition on silicon wafers. Afterward, coating properties, including wettability, thickness, and elemental composition, were characterized by contact angle meter, ellipsometer, and X-ray photoelectron spectroscopy (XPS), respectively. Importantly, MPS-MPC n polymers were found to form thin films with high hydrophilicity and superior fouling repulsion to bacteria and protein, while mixed coating involving 70% MPS-PEGMACOOH 2.5 and 30% MPS-MPC 2.5 exhibited thinnest coating with best wettability among COOH-terminated coatings. Furthermore, the functional COOH group in the coated surfaces was exploited for postmodification with biological molecules via intermediated N -hydroxysuccinimide (NHS) ester group by amine coupling chemistry. Once again, the combination of 70% MPS-PEGMACOOH 2.5 and 30% MPS-MPC 2.5 provided an ultimate reduction in nonspecific adsorption (NSA) and established a finest signal discrimination through enzyme-linked immunosorbent assay. Consequently, these novel mixed oligomeric silatranes offer a promising approach for the construction of biosensor interfaces with dual functions in both nonspecific binding prevention and conjugation of biomolecules.

This study aims to investigate the influence of zwitterionic amphiphilic copolymers (ZACs) in the nucleation and growth of heterogeneous CaSO 4 at the zwitterion-water interface, which is crucial for the prevention of mineral scaling and consequent downtime or suboptimal performance in industries like membrane desalination, heat exchangers, and pipeline transportation. In situ grazing incidence small angle X-ray Scattering (GISAXS), and quartz crystal microbalance with dissipation (QCM-D) techniques were used to analyze the evolution of CaSO 4 particles on two new ZAC coatings: poly-(trifluoroethyl methacrylate-random-sulfobetaine methacrylate) (PTFEMA-r-SBMA, or PT:SBMA) and poly(trifluoroethyl methacrylate-random-2-methacryloyloxyethyl phosphorylcholine) (PTFEMA-r-MPC, or PT:MPC). The results showed that PT:MPC coatings promoted nucleation but inhibited crystal growth, resulting in slower overall reaction kinetics on PT:MPC coatings compared to PT:SBMA coatings. Interfacial interactions involving the substrates, sulfate minerals, and ions were examined, revealing that calcium ion adsorption, primarily governed by electrostatic attraction, played a crucial role in the nucleation and growth processes on both ZAC coatings. The crystal characterization revealed a phase transition from bassanite to gypsum on both ZAC coatings, suggesting that these zwitterionic materials can influence the mineral phase of heterogeneously formed CaSO 4 crystals. These findings enhance our understanding of the fundamental mechanisms underlying heterogeneous CaSO 4 scaling in the presence of zwitterionic materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Phthalate esters (PAEs), as emerging pollutants, pose a serious threat to human health and have become a major concern in the fields of environmental protection and food safety. Selective adsorption using molecularly imprinted polymer (MIP) is feasible, but most MIPs use the potentially toxic methacrylic acid (MAA) as a functional monomer, along with other crosslinking agents. In this study, MIP adsorbent was prepared using only ethylene glycol dimethacrylate (EGDMA) as both the functional monomer and crosslinking agent, without the inclusion of MAA. The adsorbent was utilized for the adsorption of PAEs from an ethanol aqueous solution. The results showed that EGDMA-based MIP (EMIP) achieved better adsorption performance of PAEs than MAA-based MIP (MMIP) due to more interactions of EGDMA with PAEs than MAA with them. For the adsorption of dibutyl phthalate (DBP) using EMIP, 95% of the equilibrium adsorption capacity was achieved within the first 15 min. In the isotherm analysis, the theoretical maximum adsorption capacity of EMIP was obtained as high as 159.24 mg/g at 20 °C in an ethanol (10 v%) aqueous solution. Furthermore, the adsorption of EMIP was not affected by the pH of the solution. The adsorption process of EMIP followed the pseudo-second-order kinetic and Freundlich isotherm model. Ethanol had a significant impact on the adsorption of DBP, and the results of molecular simulation could validate this. In addition, the regeneration experiments indicated that EMIP could be recycled 5 times without significant performance change and had a high recovery efficiency of 94.55%., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Repairing bone defects is a complex cascade reaction process, as immune system regulation, vascular growth, and osteogenic differentiation are essential. Thus, developing a tissue-engineered biomaterial that caters to the complex healing process of bone regeneration remains a major clinical challenge. In the study, Ca 2+ -TA-rGO (CTAG)/GelMA hydrogels were synthesized by binding Ca 2+ using metal chelation to graphene oxide (GO) nanosheets reduced by tannic acid (TA-rGO) and doping them into gelatin methacrylate (GelMA) hydrogels. TA and rGO exhibited biocompatibility and immunomodulatory properties in this composite, while Ca 2+ promoted bone formation and angiogenesis. This novel nanocomposite hydrogel demonstrated good mechanical properties, degradability, and conductivity, and it could achieve slow Ca 2+ release during bone regeneration. Both in vitro and in vivo experiments revealed that CTAG/GelMA hydrogel modulated macrophage reprogramming and induced a shift from macrophages to healing-promoting M2 macrophages during the inflammatory phase, promoted vascular neovascularization, and facilitated osteoblast differentiation during bone formation. Moreover, CTAG/GelMA hydrogel could downregulate the NF-κB signaling pathway, offering new insights into regulating macrophage reprogramming-osteogenic crosstalk. Conclusively, this novel multifunctional nanocomposite hydrogel provides a multistage treatment for bone and orchestrates macrophage reprogramming-osteogenic crosstalk to boost bone repair., Competing Interests: Declarations Ethics approval and consent to participate Ethics Animal housing and experimental procedures were conducted according to the Ethics Committee of Bengbu Medical University Ethics Committee (Approval number: 2021272). Consent for publication All authors agree to the publication. Competing interests The authors declare no competing interests., (© 2024. The Author(s).)

Objectives: To assess the influence of different primer compositions-silane (S), 10-methacryloyloxydecyl dihydrogen phosphate (MDP), and the combination of silane and MDP (S + MDP)-on the bonding performance of MDP-free and MDP-containing resin cements to highly translucent zirconia., Materials and Methods: Tribochemical silica-coated zirconia plates were pretreated with one of three experimental primers, S, MDP, or S + MDP, with untreated specimens serving as controls. Subsequently, these plates were bonded to stainless-steel rods using either two MDP-free or two MDP-containing resin cements. Tensile bond strength was measured after 24 h (TC0) and following thermal cycling (4-60 °C for 10,000 cycles; TC10,000). Data were analyzed using a three-way analysis of variance (ANOVA), followed by one-way ANOVA and Tukey-Kramer post hoc tests (α = 0.05). X-ray photoelectron spectroscopy (XPS) assessed the elemental mass concentrations on the zirconia surfaces., Results: For MDP-free resin cements, MDP-treated specimens exhibited significantly greater bond strengths than controls, regardless of the aging conditions. However, a significant reduction in bond strength was observed between TC0 and TC10,000 in most of the MDP-free resin cement groups, except for one S + MDP group. Conversely, for MDP-containing resin cements, the S + MDP group exhibited no statistically significant differences between aging conditions. Notably, XPS analysis detected silicon, zirconium, and aluminum on the zirconia surfaces., Conclusions: No significant difference in tensile bond strength was observed between aging conditions for MDP-containing resin cements bonded to tribochemical silica-coated zirconia primed with S + MDP., Clinical Relevance: The combination of MDP-containing primers and resin cements demonstrated superior bonding performance to tribochemical silica-coated zirconia., Competing Interests: Declarations Ethics approval and consent to participate Not applicable. Competing interests The authors declare no competing interests., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Reconstruction of bone defects has long been a major clinical challenge. Limited by the various shortcomings of conventional treatment like autologous bone grafting and inorganic substitutes, the development of novel bone repairing strategies is on top priority. Injectable biomimetic hydrogels that deliver stem cells and growth factors in a minimally invasive manner can effectively promote bone regeneration and thus represent a promising alternative. Therefore, in this study, we designed and constructed an injectable nanocomposite hydrogel co-loaded with Laponite (Lap) and vascular endothelial growth factor (VEGF) through a simplified and convenient scheme of physical co-mixing (G@Lap/VEGF). The introduced Lap not only optimized the injectability of GelMA by the electrostatic force between the nanoparticles, but also significantly delayed the release of VEGF-A. In addition, Lap promoted high expression of osteogenic biomarkers in mesenchymal stem cells (MSCs) and enhanced the matrix mineralization. Besides, VEGF-A exerted chemotactic effects recruiting endothelial progenitor cells (EPCs) and inducing neovascularization. Histological and micro-CT results demonstrated that the critical-sized calvarial bone defect lesions in the SD rats after treated with G@Lap/VEGF exhibited significant in vivo bone repairing. In conclusion, the injectable G@Lap/VEGF nanocomposite hydrogel constructed in our study is highly promising for clinical transformation and applications, providing a convenient and simplified scheme for clinical bone repairing, and contributing to the further development of the injectable biomimetic hydrogels., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Lequn Shan reports financial support was provided by Key Research and Development Program of Shaanxi Province. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Hydrogels are indispensable for a variety of applications. Conventional biomaterial-based hydrogels, typically made from proteins or polysaccharides, often suffer from high costs, poor mechanical properties, and limited chemical functionality for modification. In this work, we present a novel hydrogel developed from modified castor oil, which is a renewable and cost-effective resource. Castor oil-based oligomer (CG) was synthesized using glycidyl methacrylate and triethylamine via ring-opening polymerization. The oligomer formed a gel only with Cu 2+ ions among the various systematically studied metal ions. Comprehensive density functional theory calculations, atoms in molecules analysis, and steady and dynamic shear rheology were conducted to investigate the metal-binding sites and metal-oligomer interactions as well as the self-healing and viscoelastic properties of the oil-based hydrogels. The hydrogel exhibited 94% self-healing efficiency and performed as a recyclable rhodamine B dye adsorbent (73-90%). This innovative approach offers a novel, cost-effective, and sustainable alternative to traditional hydrogels, paving the way for advanced applications.

Composite biomaterials with excellent biocompatibility and biodegradability are crucial in tissue engineering. In this work, a composite protein and polysaccharide photo-cross-linkable hydrogel was prepared using silk fibroin methacrylate (SFMA) and hyaluronic acid methacrylate (HAMA). SFMA was obtained by the methacrylation of degummed SF with glycidyl methacrylate (GMA), while HA was methacrylated by 2-aminoethyl methacrylate hydrochloride (AEMA). We investigated the effect of the addition of 1 wt % HAMA to 5, 10, and 20 wt % SFMA, which resulted in an increase in both static and cycling mechanical strengths. All composite hydrogels gelled under UV light in <30 s, allowing for rapid stabilization and stiffness increases. The biocompatibility of the hydrogels was confirmed by direct and indirect contact methods and by evaluation against the NIH3T3 and MC3T3 cell lines with a live-dead assay by confocal imaging. The range of obtained mechanical properties from developed composite and UV-cross-linkable hydrogels sets the basis as possible future biomaterials for various biomedical applications.

Introduction: The photo-activated thermo/gas antimicrobial nanocomposite hydrogel, Gel/PDA@BNN6, is composed of the nitric oxide (NO) carrier N, N'-di-sec-butyl-N, N'-dinitroso-p-phenylenediamine (BNN6), photothermal (PTT) material polydopamine nanoparticles (PDA NPs), and methacrylate gelatin (GelMA). This hydrogel can release NO gas in a stable and controlled manner, generating a localized photothermal effect when exposed to near-infrared laser light. This dual action promotes the healing of full-thickness skin wounds that are infected., Methods: Gel/PDA@BNN6 was developed, and both in vitro and in vivo experiments were carried out to evaluate its structure, physicochemical properties, antibacterial effects, effectiveness in promoting infected wound healing, and biocompatibility., Results: Gel/PDA@BNN6 was successfully synthesized, exhibiting a porous three-dimensional lattice structure and excellent mechanical properties. It demonstrated highly efficient photothermal conversion, controllable nitric oxide delivery, strong bactericidal effects, and minimal cytotoxicity in vitro. In vivo, Gel/PDA@BNN6, when used with NIR therapy, showed significant anti-inflammatory effects, promoted collagen deposition, and stimulated vascular neoangiogenesis, which accelerated wound closure. Additionally, it displayed superior biocompatibility., Discussion: Gel/PDA@BNN6 has shown an explicit curative effect for infected wound healing, suggesting it has a good chance of being an antimicrobial dressing in the future., Competing Interests: The authors declare no conflict of interest., (© 2024 Yang et al.)

On-site extraction plays a significant role in the reliable quantification of strong polar phenoxycarboxylic acid herbicides (PCAs) in aqueous samples. In current study, a new technique for the field sample preparation of PCAs was developed by means of three channels in-tip microextraction device (TCIM). To capture PCAs effectively, an extraction phase based on monolith (EPM) using vinylimidazole and divinylbenzene/ethylene dimethacrylate as monomer and cross-linkers, respectively, was in-situ synthesized in pipette tips. The EPM fabricated at optimal conditions were characterized by a series of techniques and employed as the adsorbent of TCIM for the on-site extraction of PCAs. The adsorption isotherm was studied so as to inspect the extraction behaviors of EPM towards PCAs. Results revealed that the proposed EPM/TCIM presented satisfactory extraction performance towards PCAs through multiple interactions. The enrichment factors and adsorption capacity were 74-277 and 20 mg g -1 , respectively. Under the most beneficial extraction parameters, the developed EPM/TCIM was successfully employed to on-site extract PCAs, and then combining with HPLC equipped with diode array detector to monitor trace PCAs in actual waters. The limits of detection (LODs) towards investigated PCAs varied from 0.071 μg/L to 0.30 μg/L. In addition, the accuracy of established approach was inspected with documented method. Compared with existing lab-based sample preparation approaches, the introduced field sample preparation technique exhibits some merits such as avoidance of transporting large volume of water, prevention of analytes loss during sampling procedure, less usage of organic solvent and achievement of satisfactory efficient in sample preparation., Competing Interests: Declaration of competing interest The authors declared no potential conflict of interest with respect to the research, authorship, and/or publication of this article. The authors declared that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In bone tissue, nerves are primarily located in the periosteum and play an indispensable role in bone defect repair. However, most bone tissue engineering approaches ignored the reconstruction of the nerve network. Herein, we aimed to develop a bilayer hydrogel simulating periosteum-bone structure to induce innervated bone regeneration. The bottom "bone" layer consisted of gelatin methacryloyl (GelMA), poly(ethylene glycol) diacrylate (PEGDA), and nano-hydroxyapatite (nHA), whereas the upper "periosteum" layer consisted of GelMA, sodium alginate (SA) and MgCl 2 . The mechanical properties of the upper and bottom hydrogels were designed to be suitable for neurogenesis and osteogenesis, respectively. Besides, Mg 2+ from the "periosteum" layer released at the early stage (within 7 d), which aligned with the optimal time window for nerve regeneration and osteogenic related neuropeptide release. Simultaneously, the prevention of long-term Mg 2+ release (after 7 d) could avoid osteogenic inhibition caused by prolonged Mg 2+ exposure. Additionally, the incorporation of nHA in the bottom "bone" layer supported the long-term osteogenesis due to its osteoconductivity and slow degradation. In vitro biological experiments revealed that the bilayer hydrogel (GS@Mg/GP@nHA) promoted neurite growth and calcitonin gene-related peptide (CGRP) expression in rat dorsal root ganglion (DRG) neurons, as well as the osteogenesis of rat bone-derived mesenchymal stem cells (BMSCs). Moreover, the in vivo experiments demonstrated that the GS@Mg/GP@nHA hydrogel efficiently promoted nerve network reconstruction and bone regeneration of rat calvarial bone defects. Altogether, the bilayer hydrogel GS@Mg/GP@nHA could promote innervated bone regeneration, providing new insights for biomaterial design for bone tissue engineering.

Ternary amorphous solid dispersions (ASDs) consist of a multicomponent carrier with the aim of improving physical stability or dissolution performance. A polymer blend as a carrier that combines a water-insoluble and a water-soluble polymer may delay the drug release rate, minimizing the risk of precipitation from the supersaturated state. Different microstructures of the ternary ASD may result in different drug release performances; hence, understanding the phase morphology of the polymer blend is crucial prior to drug incorporation. The objective of this study is to investigate the miscibility of the water-insoluble p(MMA- co -HEMA) and water-soluble polymers such as HPC, HPMC, HPMC-AS, and Soluplus. To prepare the polymer blends, p(MMA- co -HEMA) was spray dried in 80/20 and 90/10 (w/w) ratios with one of the water-soluble polymers. Thermal analysis (mDSC and DMA) and solid-state (ss)NMR relaxometry were applied to study the miscibility of these blends. No conclusions regarding miscibility could be drawn from the T g measurements by thermal analysis. However, phase-separation could be demonstrated in all blends by ssNMR relaxometry. Moreover, by measuring both the T 1ρH and T 1H relaxation times, domain sizes between 5 and 50 nm could be estimated. This work shows the importance of using complementary analytical techniques to investigate polymer miscibility.

Background: Using infection control barriers (ICBs) on light curing units (LCUs) became mandatory to achieve proper infection control measures without jeopardizing the integrity of the restorations, especially at deeper layers. This study explored the effect of two ICBs on the irradiance of the LCU, as well as the degree of conversion (DC) and flexural strength (FS) of two types of bulk-fill composites. Water vapor permeability (WVP) of both barriers was also assessed to evaluate the capability of such barriers to prevent transmission of blood and saliva droplets and aerosols., Methods: Two bulk-fill composites (X-tra fil and Tetric N- ceram) and two ICBs (Pinnacle Cure sleeve and Sanita wrapping film) were used in this study. Light irradiance was recorded per experimental condition using spectroradiometer. For DC and FS, specimens of 4 mm thickness were prepared. Each specimen was composed of two separable upper and lower layers of thickness 2 mm. DC and FS were measured using Infra-red spectroscopy and three-point loading test respectively. WVP was investigated using the cup method. Means and standard deviations were calculated, and the data were statistically analyzed using factorial analysis of variance test (α = 0.05)., Results: Light irradiance showed highest values using no ICBs and lowest values using Pinnacle curing sleeve. Both bulk-fill composites showed higher DC mean values without ICBs and when using Sanita wrapping film for both upper and lower layers of the specimens compared to Pinnacle curing sleeve. The upper layers of composite specimens showed higher DC compared to lower layers for all experimental conditions. Both ICBs had no adverse effect on FS of both composites' upper layers. Pinnacle sleeve significantly reduced FS of both composites' lower layers. X-tra fil showed higher DC and FS compared to Tetric N-Ceram for all experimental conditions. Regarding WVP; the wrapping film showed higher WVP compared to the curing sleeve., Conclusions: Sanita wrapping film can be used as a successful ICB, without jeopardizing the concept of bulk-fill composites. Pinnacle cure sleeve can be considered an effective ICB, however its influence on properties and serviceability of bulk-fill composites remains questionable., (© 2024. The Author(s).)

Biobased materials are an important step towards a sustainable future. The need for these materials, which stand out in terms of their environmental and economic benefits, is increasing daily. This study includes the production of new bio based nanocomposites containing a blend of biopolymer chitosan (CS) and synthetic polymethacrylate derivative poly(2-oxo-2-(3,4,5-trifluoroanilino)ethyl-2-methylprop-2-enoate)(POTFAMA) and biosynthesized zinc oxide nanoparticles (ZnO NPs) by hydrothermal method. POTFAMA, POTFAMA-CS blend, and POTFAMA-CS/ZnO nanocomposites were characterized by FTIR, XRD, SEM, EDX, and TEM techniques. The thermal properties of the materials were determined by TGA and DSC. While POTFAMA reduced the thermal stability of CS, ZnO NPs incorporated into POTFAMA-CS blend increased the thermal stability. POTFAMA-CS blend had a single glass transition temperature (Tg) value at 116 °C. The Tg of CS, which was 93 °C, increased by 23 °C after blending with POTFAMA, and by 34 °C with the incorporation of 7 % ZnO NPs. The biological properties of the prepared materials have been meticulously investigated. The inhibition zone of CS against C. albicans was 10.66 ± 1.19 mm, while that of the POTFAMA-CS blend was 13.70 ± 1.54 mm. After standard BHT at a concentration of 120 μg/mL, the highest DPPH inhibition percentages belonged to POTFAMA (60.56 %) and POTFAMA-CS (52.99 %). It was detected that the wound closure rates of POTFAMA (17.51 ± 0.75 %) and POTFAMA-CS (15.51 ± 2.52 %) were better than the characteristics of CS wound closure (13.61 ± 2.01 %). The results suggest that POTFAMA-CS may be a good alternative as a wound-healing agent. Furthermore, nanocomposites containing 5 % and 7 % ZnO NPs can be an alternative material in healthcare due to their higher antimicrobial activity., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Cellulose nanocrystals (CNCs), derived from diverse sources and distinguished by their inherent biodegradability, excellent biocompatibility, and facile cellular engulfment due to their rod-like structure, hold great promise as carriers for the development of nano-delivery systems. In this work, highly efficient rod-like CNCs were employed as substrates for grafting glycidyl onto their surfaces through ring-opening polymerization, forming hyperbranched polymers with superior cell uptake properties. Subsequently, 4-vinylbenzeneboronic acid (VB) and poly (ethylene glycol) methyl ether methacrylate (PEGMA) were employed as monomers in the polymerization process to fabricate a pH-responsive targeted nano-delivery system, denoted as CNCs-VB-PEGMA, via single electron transfer reactive radical polymerization (SET-LRP) reaction. The CNCs-VB-PEGMA was successfully prepared and used for the loading of curcumin (Cur) to form a pH-responsive nano-delivery system (CNCs-VB-PEGMA-Cur), and the loading rate of Cur was as high as 70.0 %. Studies showed that this drug delivery system could actively targeting liver cancer cells with the 2D cells model and 3D tumor microsphere model, showing efficient liver cancer cell-killing ability. Collectively, the CNCs-VB-PEGMA drug delivery system has potential applications in liver cancer therapy as an actively targeting and pH-responsive drug delivery system., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

As the application of conductive hydrogels in the field of wearable smart devices is gradually deepening, a variety of hydrogel sensors with high mechanical properties, strong adhesion, fast self-healing, and excellent conductivity are emerging. However, it is still a great challenge to manufacture hydrogel sensors combining multiple properties. Herein, we leveraged the dynamic redox reaction occurring between polydopamine (PDA) and Fe 3+ to induce ammonium persulfate (APS) to generate free radicals, thereby initiating the copolymerization of hydroxyethyl methacrylate (HEMA) and acrylic acid (AA) monomers. Then, polypyrrole-encapsulated cellulose nanofibers (PPy@CNF) and carboxymethylcellulose (CMC) were incorporated as conductive reinforced nanofillers and interpenetrating network skeleton. The obtained hydrogel cross-linked through reversible metal-ligand bonds, π-π stacking and abundant hydrogen bonding demonstrated great mechanical properties (strength 240.4 kPa, strain 1175 %) and self-healing ability (88.96 %). Particularly, the gel displayed ultrahigh durability and skin adhesive ability (75 kPa after 10 cycles), surpassing previous skin adhesion hydrogels. Furthermore, through the synergistic conductive effect of PPy@CNF and Fe 3+ , the prepared hydrogel sensor possessed high sensitivity (GF = 1.89) with a wide sensing range (~1000 %), which could realize the human body's daily motion detection, and had a promising application in flexible wearable electronics., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Although the multidisciplinary area of liver tissue engineering is in continuous progress, research in this field is still focused on developing an ideal liver tissue template. Innovative strategies are required to improve membrane stability and bioactivity. In our study, sustainable biomimetic membranes were developed by blending methacrylated chitosan (CSMA) with jellyfish collagen (jCol) for liver tissue engineering applications. The in vitro biological behaviour demonstrated the capability of the developed membranes to create a suitable milieu to enable hepatocyte growth and differentiation. The functionalization of chitosan together with the biocompatibility of marine collagen and the intrinsic membrane properties offered the ideal biochemical, topographical, and mechanical cues to the cells. Thanks to the enhanced CSMA/jCol membranes' characteristics, hepatocytes on such biomaterials exhibited improved growth, viability, and active liver-specific functions when compared to the cell fate achieved on CSMA membranes. Our study provides new insights about the influence of membrane properties on liver cells behaviour for the design of novel instructive biomaterials. The enrichment of functionalized chitosan with marine collagen represents a promising and innovative approach for the development of an appropriate platform for hepatic tissue engineering., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Random flaps are extensively utilized in plastic surgery due to their flexibility compared to traditional axial vascular system arrangements and their resemblance to injured skin in color, thickness, and texture. Despite these advantages, they are susceptible to ischemia-reperfusion injuries and subsequent necrosis post-transplantation. Bilobalide (BB), a sesquiterpene compound derived from Ginkgo biloba, exhibits notable antioxidant and anti-inflammatory properties and is commonly used to treat ischemiareperfusion injuries. However, its short half-life restricts its sustained efficacy in random flaps. In this study, we synthesized a multi-crosslinked, photosensitive methacryloyl hyaluronic acid(HAMA)/laponite(Lap)/bilobalide (BB) hydrogel. This dualcrosslinked hydrogel demonstrates superior mechanical properties and biocompatibility while providing a stable release of bilobalide. In vitro experiments showed that it significantly reduces edema, promotes angiogenesis, and enhances the survival of random flaps. Further network pharmacology analysis and recovery experiments suggested that the hydrogel's beneficial effects are mediated by the regulation of endoplasmic reticulum stress and specifically identified the regulation of the PERK/TXNIP/NLRP3 signaling pathway as crucial to its anti-inflammatory effects. Therefore, this HAMA/Lap/BB hydrogel promotes the survival of random flaps in rats by alleviating endoplasmic reticulum stress, providing a novel intervention strategy for the treatment of random flaps injuries., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Ye jiangtian reports financial support was provided by Wenzhou Medical University. Ye Jiangtian reports a relationship with Wenzhou Medical University that includes: funding grants. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A major roadblock in implementing engineered tissues clinically lies in their limited vascularization. After implantation, such tissues do not integrate with the host's circulation as quickly as needed, commonly resulting in loss of viability and functionality. This study presents a solution to the vascularization problem that could enable the survival and function of large, transplantable, and vascularized engineered tissues. The technique allows vascularization of a cell laden hydrogel through angiogenesis from a suturable tissue-engineered vascular graft (TEVG) constructed from electrospun polycaprolactone with macropores. The graft is surrounded by a layer of cell-laden gelatin-methacryloyl hydrogel. The constructs are suturable and possess mechanical properties like native vessels. Angiogenesis occurs through the pores in the graft, resulting in a hydrogel containing an extensive vascular network that is connected to an implantable TEVG. The size of the engineered tissue and the degree of vascularization can be increased by adding multiple TEVGs into a single construct. The engineered tissue has the potential to be immediately perfused by the patient's blood upon surgical anastomosis to host vessels, enabling survival of implanted cells. These findings provide a meaningful step to address the longstanding problem of fabricating suturable pre-vascularized tissues which could survive upon implantation in vivo. STATEMENT OF SIGNIFICANCE: Creating vascularized engineered tissues that can be transplanted and rapidly perfused by the host blood supply is a major challenge which has limited the clinical impact of tissue engineering. In this study we demonstrate a technique to fabricate vascularized tissue constructs via angiogenesis from a suturable tissue-engineered vascular graft. The macroporous graft is surrounded with hydrogel, allowing endothelial cells to migrate from the lumen and vascularize the hydrogel layer with capillary-like structures connected to the macrovessel. The graft has comparable mechanical properties to native blood vessels and larger constructs can be fabricated by incorporating multiple grafts. These constructs could potentially be connected surgically to the circulation at an implantation site to support their immediate perfusion and survival., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Bacterial infection, reactive oxygen species (ROS) accumulation, and persistent inflammation pose significant challenges in the treatment of periodontitis. However, the current single-modal strategy makes achieving the best treatment effect difficult. Herein, we developed a double-network hydrogel composed of Pluronic F127 (PF-127) and hyaluronic acid methacrylate (HAMA) loaded with spermidine-modified mesoporous polydopamine nanoparticles (M@S NPs). The PF-127/HAMA/M@S (PH/M@S) hydrogel was injectable and exhibited thermosensitivity and photocrosslinking capabilities, which enable it to adapt to the irregular shape of periodontal pockets. In vitro, the PH/M@S displayed multiple therapeutic effects, such as photothermal antibacterial activity, a high ROS scavenging capacity, and anti-inflammatory effects, which are beneficial for the multimodal treatment of periodontitis. The underlying anti-inflammatory mechanism of this hydrogel involves suppression of the extracellular regulated protein kinase 1/2 and nuclear factor kappa-B signalling pathways. Furthermore, in lipopolysaccharide-stimulated macrophage conditioned media, the PH/M@S effectively restored the osteogenic differentiation potential. In a rat model of periodontitis, the PH/M@S effectively reduced the bacterial load, relieved local inflammation and inhibited alveolar bone resorption. Collectively, these findings highlight the versatile functions of the PH/M@S, including photothermal antibacterial activity, ROS scavenging, and anti-inflammatory effects, indicating that this hydrogel is a promising multifunctional filling material for the treatment of periodontitis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Many studies have demonstrated the excellent performance of 10-MDP (10-methacryloyloxydecyl dihydrogen phosphate) as a functional monomer for dental adhesive materials and as a primer for ceramic surfaces. Although adhesive performance is affected by the purity level of 10-MDP, this parameter is rarely described, and possible byproducts have been suggested in the literature, but have not been identified to date. The present study aims to present an accessible 10-MDP synthesis strategy with easily handled reagents and address the characterization challenges, especially in identifying byproducts. 10-MDP was synthesized from 10-hydroxydecyl methacrylate and phosphorus pentoxide in acetone. The final product was characterized by nuclear magnetic resonance (NMR), infrared spectroscopy (FTIR) and mass spectrometry MALDITOF/TOF. The main chemical groups associated with 10-MDP were identified by 1 H, 31 P, and 13 C NMR analyses. Only mass spectrometry analyses (MALDITOF/TOF) could identify the presence of dimers as byproducts. Its proposed chemical structure indicates that the dimers were formed by the reaction between the phosphate ester groups and others formed by the reaction of the methacrylic group of 10-MDP molecules. Careful adjustment of the synthesis conditions to reduce the formation of these byproducts is also described. The results indicate that the characterization of 10-MDP batches as raw materials is an important task because, depending on the byproduct present, its ability to polymerize or acid etching capacity may be compromised., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Inc.)

Objectives: This study was to investigate the effects of optimized microstructured surfaces on bond strength and bond durability of the latest nanoparticle jetting (NPJ)-printed zirconia., Methods: Zirconia microstructured surfaces with different geometries and void volume were analyzed through three-dimensional finite element analysis for surface micromorphology optimization. Zirconia disks and cylinders were additively manufactured by an NPJ 3D printer (N = 128). They were randomly divided into four groups based on surface micromorphology optimization and airborne-particle abrasion (APA) treatment before they were bonded using 10-methacryloloxydecyl dihydrogen phosphate (MDP) containing resin cement (Clearfil SA luting cement). The shear bond strengths (SBSs) were tested before and after 10,000 thermocycles and were analyzed by one-way ANOVA analysis. Failure modes were determined by optical microscopy. Zirconia surfaces were analyzed with X-ray diffraction, scanning electron microscopy, and three-dimensional interference microscopy., Results: The optimized microstructured surface was characterized by circular microstructures with 60 % void volume, about 20 µm of depths, about 10 µm of undercuts, and consistent beam widths. The optimized microstructured surface combined with APA treatment and MDP-containing resin cement possessed the highest SBSs both before and after thermocycling aging (P＜0.05). The greater reductions of zirconia bond strengths occurred when the zirconia were not treated with APA (P＜0.05)., Significance: The optimized microstructured zirconia surface with circular microstructures and 60 % void volume fabricated by the latest NPJ printing technology could greatly enhance the zirconia bond strength and durability in combination with APA treatment and application of MDP-containing resin cement, which might be promising for adhesively bonded indirect restorations of NPJ-printed zirconia., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Engineered hydrogel patches have shown promising therapeutic effects in the treatment of myocardial infarction (MI), especially anisotropic patches that mimic the characteristics of native myocardium have attracted widespread attention. However, it remains a great challenge to develop cardiac patches with long-range and orderly electrical conduction based on an effective, mild, and rapid strategy. Here, a multifunctional anisotropic cardiac patch is presented based on microfluidic manipulation. The anisotropic alginate-gelatin methacrylate hydrogel patches are easily and rapidly prepared through microfluidic focusing, ion-photocrosslinking, and parallel packing processes. The fluid-based anisotropic realization process does not involve complex machining and strong field stimulation and is compatible with the loading of macromolecular biological agents. The anisotropic hydrogel patch can mimic the anisotropy of the myocardium and guide the directional polarization of cardiomyocytes. In animal model experiments, it also exhibits significant effects in inhibiting ventricular remodeling, fibrosis, and enhancing cardiac function recovery after MI. These comprehensive features make the multifunctional hydrogel patch a promising candidate for cardiac tissue repair and future provide a new paradigm for expanding microfluidic technology to solve tissue engineering challenges., (© 2024 Wiley‐VCH GmbH.)

Gelatin (Gel) hydrogels are widely utilized in various aspects of tissue engineering, such as wound repair, due to their abundance and biocompatibility. However, their low strength and limited functionality have constrained their development and scope of application. Tannic acid (TA), a naturally occurring polyphenol found in plants and fruits, has recently garnered interest as a crosslinking, anti-inflammatory, and antioxidant agent. In this study, we fabricated novel multifunctional gelatin methacrylate/alginate-tannin (GelMA/Alg-TA) hydrogels using chemical and physical crosslinking strategies with gelatin methacrylate (GelMA), alginate (Alg), and TA as the base materials. The GelMA/Alg-TA hydrogels maintained a stable three-dimensional porous structure with appropriate water content and exhibited excellent biocompatibility. Additionally, these hydrogels demonstrated significant antioxidant and antibacterial properties and substantially promoted wound healing in a mouse model of full-thickness skin defects by modulating inflammatory responses and enhancing granulation formation. Therefore, our study offers valuable insights into the design principles of novel multifunctional GelMA/Alg-TA hydrogels, highlighting their exceptional biocompatibility, antioxidant, and antibacterial properties. GelMA/Alg-TA hydrogels are promising candidates for wound healing applications., Competing Interests: Declaration of competing interest The authors report no conflicts of interest in this work., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Modified polyvinylidene chloride (PVDC) resin was prepared using octafluoropentyl methacrylate and trimethylolpropane trimethacrylate as modifying monomers through seeded emulsion polymerization. The successful incorporation of octafluoropentyl methacrylate into the PVDC resin was confirmed by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and XPS were utilized to investigate the element distribution in the modified monomer emulsion and the mechanism of monomer modification. The results demonstrated that the fluorine monomer was reacted in the resin, and mainly concentrated on the surface of the resin. The addition of octafluoropentyl methacrylate and trimethylolpropane trimethacrylate improved the water resistance of the resin. Compared to unmodified PVDC resin, the contact angle of the modified PVDC resin increased from 89.46° to 109.51°, and the water resistance at room temperature increased from 120 to 500 h. Furthermore, the modified resin exhibited excellent mechanical properties, thermal stability, and storage stability., (© 2024 The Author(s). Macromolecular Rapid Communications published by Wiley‐VCH GmbH.)

The accurate protein-protein separation is important but technically challenging. Achieving such a precise separation using membrane requires the selective channels with appropriate pore geometry structure and high anti-fouling property. In this study, polyethersulfone-b-poly(sulfobetaine methyl methacrylate) (PES-b-PSBMA) was synthesized and engineered onto polysulfone (PSF) ultrafiltration (UF) membrane to fabricate zwitterionic nanospheres engineered co-polymer (ZN-e-CoP) composite membrane via dynamic self-assembly micelle deposition. On the one hand, self-assembly zwitterionic nanospheres were used as blocks to construct hydrophilic layers with size-dependent sieving channels, endowing ZN-e-CoP composite membranes with enhanced permselectivity and protein-protein separation abilities, meanwhile zwitterionic groups from nanospheres reinforced the structure stability of nanospheres/nanospheres and nanospheres/membrane via multiple intermolecular interactions. On the other hand, zwitterionic nanospheres can induce to produce the hydration layer enveloping themselves by binding water molecules, where hydration layer acts as a protective barrier on the membrane surface, impeding the protein adhesion. Hence, ZN-e-CoP&#95;1a composite membrane exhibited superior separation properties with Lysozyme/Bovine Serum Albumin (BSA) separation factor of 18.1 and 95.4 % rejection against BSA, 10.1 and 2.3 times, respectively, higher these of pristine PSF membrane (1.8 and 42.1 %), without obviously sacrificing water flux. Simultaneously, hydration layer enables the ZN-e-CoP&#95;1a membrane with enhanced anti-fouling performance and durability during the long-term operations. The proposed approach opens new pathways to fabricate excellent anti-fouling membranes for precise protein-protein separation., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Methacrylated biopolymers are unique and attractive in preparing photocrosslinkable hydrogels in biomedical applications. Here we report a novel chitosan (CS) derivative-based injectable hydrogel with anti-inflammatory capacity via methacrylation modification. First, ibuprofen (IBU) was conjugated to the backbone of CS by carbodiimide chemistry to obtain IBU-CS conjugate, which converts water-insoluble unmodified CS into water-soluble IBU-CS conjugate. The IBU-CS conjugate did not precipitate at the pH of 7, which was beneficial to subsequent chemical modification with methacrylic anhydride to prepare IBU-CS methacrylate (IBU-CS-MA) with significantly higher methacrylation substitution. Photocrosslinkable in situ gel formation of injectable IBU-CS-MA hydrogel was verified using lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) initiator under visible light. The IBU-CS-MA hydrogel showed good cytocompatibility as revealed by encapsulating and in vitro culturing murine fibroblasts within hydrogels. It promoted macrophage polarization toward M2 phenotype, as well as downregulated pro-inflammatory gene expression and upregulated anti-inflammatory gene expression of macrophages. The hydrogel also significantly reduced the reactive oxygen specifies (ROS) and nitrogen oxide (NO) produced by lipopolysaccharides (LPS)-stimulated macrophages. Upon subcutaneous implantation in a rat model, it significantly mitigated inflammatory responses as shown by significantly lower inflammatory cell density, less cell infiltration, and much thinner fibrous capsule compared with CS methacrylate (CS-MA) hydrogel. This study suggests that IBU-CS conjugate represents a feasible strategy for preparing CS-based methacrylate hydrogels for biomedical applications., (© 2024 Wiley Periodicals LLC.)

Objective: The aim of this study was to evaluate the degree of conversion (%), flexural strength (MPa), elastic modulus (GPa), compressive strength (MPa), Knoop microhardness (KHN), post-gel shrinkage (%) and prediction of ideal concentration of cholesteryl methacrylate (CM) in experimental resins., Methods: Four formulations were manipulated (F): F1, control group, (0 % CM); F2 (15 % CM); F3 (19.8 % CM) and F4 (30 % CM). Bis-GMA and CM percentages were determined using Statistica™ software. For the degree of conversion test, Raman spectroscopy was used. To testing flexural strength, elastic modulus and compressive strength, a universal testing machine was used. For the Knoop microhardness test five indentations were made in each sample. Post-gel shrinkage was determined using the strain gauge method. Statistica™ software processed all data obtained in this study. Results were submitted to one-way ANOVA and Tukey's post hoc tests (α = 0.05)., Results: Better performance was observed for F2 (15 % CM) and F3 (19,8 % CM) for degree of conversion, elastic modulus and post-gel shrinkage. For Knoop microhardness F2 (15 % CM), F3 (19,8 % CM) and F4 (30 % CM) showed higher values than F1 (0 % CM). For flexural strength F1 (0 % CM) and F3 (19,8 %) were similar and F4 showed the lowest values and for compressive strength F1 (0 % CM) showed the highest values. For mixture designs analysis data, concentrations ≤ 25 % of CM would provide better results., Significance: Addition of CM at concentrations lower than 30 % contributed to a significant increase in the degree of conversion, microhardness values, elastic modulus and reduction of post-gel shrinkage., Competing Interests: Declaration of Competing Interest The authors declare that there are professional relationships related to patent applications/registrations, which may be considered as potentially competing interests., (Copyright © 2024. Published by Elsevier Inc.)

Objective: This study aimed to investigate the effects of adding cholesteryl methacrylate (CM) monomer to experimental composite resins and evaluate its impact on polymerization shrinkage force (PSF), Knoop microhardness (KHN), sorption and solubility (SS), vulnerability to spontaneous oxidation (VOE), porosity (BES), viscosity (V), and cross-link density (CLD). CM was synthesized, mixed with varying proportions of Bis-GMA, 70 wt% filler particles, and 40 % TEGDMA. The groups tested were: CM0 (60 % Bis-GMA), CM6 (54 % Bis-GMA/6 % CM), CM12 (48 % Bis-GMA/12 % CM), CM18 (42 % Bis-GMA/18 % CM) and CM24 (36 % Bis-GMA/24 % CM). The PSF was evaluated using a universal testing machine. KHN was measured with a 50 g load for 30 s. SS was determined according to ISO 4049:2009. VOE was measured with a three-electrode system in an electrochemical cell. BES images were obtained using an electron microscope to assess porosity. Viscosity was measured through rheological analysis. CLD was estimated from hardness readings before and after ethanol storage., Results: CM6 (0.34 N) and CM12 (0.34 N) exhibited the lowest PSF values compared to CM0 (0.91 N). For KHN, CM6 (32.03) and CM12 (31.03) had higher values than CM0 (25.83) and were similar to CM18 (29.39) and CM24 (28.64). SS showed no significant differences among the groups. VOE indicated low vulnerability across all groups. CM12 had greater porosity compared to CM0 in BES images. CM0 had the lowest viscosity among the groups. No differences in CLD were observed among CM0, CM12, CM18, and CM24 regarding softening effects., Significance: Adding CM to Bis-GMA/TEGDMA composite resins can reduce polymerization shrinkage force and increase the initial Knoop microhardness without affecting the other properties studied., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Objectives: To evaluate the clinical performance of two flowable composites based on methacrylate and one based on ormocer in treating non-carious cervical lesions (NCCLs) after 48-month evaluation in a split-mouth double-blind clinical study design., Methods: A total of 183 restorations were performed on NCCLs using a universal adhesive system (Futurabond U, Voco GmbH) with selective enamel etching on 27 participants: two participants received twelve restorations each, three received nine restorations each, and 22 participants received six restorations each. Three different flowable composites were employed (n = 61): a low-viscosity methacrylate-based composite (GrandioSO Flow, LVM), a high-viscosity methacrylate-based composite (GrandioSO Heavy Flow, HVM), and an ormocer-based flowable composite (Admira Fusion Flow, ORM). All restorations were evaluated using FDI and USPHS criteria after 48 months. Statistical analysis was conducted using Kaplan-Meier Survival analysis and Kruskal-Wallis analysis of variance rank (α = 0.05)., Results: After 48 months, 17 restorations were lost: LVM 6, HVM 9, ORM 2. The retention rates (95 % confidence interval) were 89.4 % for LVM, 80.4 % for HVM, and 95.6 % for ORM, with a significant difference between HVM vs. LVM and HVM vs. ORM (p < 0.05). Minor defects were observed in 30 restorations for marginal staining criteria (LVM 12, HVM 10, ORM 8) and in 71 restorations for marginal adaptation criteria (LVM 24, HVM 20, ORM 27) without significant difference between groups (p > 0.05). No restorations showed postoperative sensitivity or recurrence of caries., Significance: The increased viscosity of flowable composites could reduce the clinical longevity in NCCLs after 48 months. Ormocer-based and low-viscosity methacrylate-based flowable composites showed a successful clinical performance in NCCLs after 48 months., (Copyright © 2024 Elsevier Inc. All rights reserved.)

In this work, three nanocellulose derivatives are synthesized with the aim of preparing new mucoadhesive materials. Nanocellulose is reacted with glycidyl methacrylate in dimethylsulphoxide, and with acryloyl and methacryloyl chloride in dimethylacetamide in the presence of 4-(N,N-dimethylamino)pyridine as a catalyst. These reactions are carried out under heterogeneous conditions, and the reaction products are characterized using various spectroscopic techniques, X-ray diffraction, atomic force microscopy, and thermogravimetric analysis. The Fourier-transform infrared spectra showed all the characteristic absorption bands typical for cellulose and also new peaks at 1720 cm -1 for the carbonyl group (C═O) and 1639, 812 cm -1 for the double bond (C═C). It is established that the crystal structure of the nanocellulose is slightly changed with derivatisation and the thermal stability of these derivatives increased. Mucoadhesive properties of nanocellulose and its derivatives is evaluated using the tensile test, rotating basket method, and fluorescence flow-through method. The retention of these polymers is evaluated on sheep oral mucosal tissue ex vivo using artificial saliva. Test results demonstrated that the new derivatives of nanocellulose have improved mucoadhesive properties compared to the parent nanocellulose., (© 2024 The Author(s). Macromolecular Bioscience published by Wiley‐VCH GmbH.)

Herein, a three-armed amphiphilic metallacycle-cored star supramolecular polymer (Por-MOM-PDMAEMA) has been designed and synthesized via highly efficient post-assembly polymerization. This star polymer is further self-assembled into nanoparticles of different sizes depending upon the experimental conditions. The gas-controlled morphology transformation and tunable antibacterial activities of Por-MOM-PDMAEMAis systematically investigated and compared with metallacycle (MOM). The superior antibacterial activity of Por-MOM-PDMAEMA against multidrug-resistant P. aeruginosa implies that the presence of photodynamic photosensitizer (Por) and cationic polymer chain will significantly enhance antibactericidal activity, which is mainly attributed to the synergistic effect of photosensitizer and polymer chain linked in one metallacycle core. By leveraging the unique properties of metallacycle and their dynamic response to gaseous stimuli, the antibacterial properties of the Por-MOM-PDMAEMA can be finely tuned in response to gas triggers., (© 2024 Wiley‐VCH GmbH.)

Enamel adhesion is acknowledged as durable; however, achieving long-lasting dentin adhesion remains a formidable challenge due to degradation of exposed collagen matrix after acid-etching of dentin. The idea of developing an enamel-like adhesion interface holds great promise in achieving enduring dentin adhesion. In this study, we constructed an enamel-like adhesion interface using a rapid remineralization strategy comprising an acidic primer and a rapid remineralization medium. Specifically, the acidic primer of 10-methacryloyloxydecyl dihydrogen phosphate (MDP) and epigallocatechin-3-gallate (EGCG) nanocomplex (MDP@EGCG primer) was utilized to partially demineralize dentin within 30 s, and the MDP@EGCG nanocomplex showed a strong interaction with exposed collagen, enhancing collagen remineralization properties. Then, the rapid remineralization medium containing polyaspartate (Pasp) stabilized amorphous calcium and phosphorus nanoclusters (rapid Pasp-CaP) was applied to modified dentin collagen for 1 min, which caused rapid collagen remineralization within a clinically acceptable time frame. This strategy successfully generated an inorganic rough and porous adhesive interface resembling etched enamel, fundamentally addressed issues of collagen exposure, and achieved durable dentin adhesion in vitro and in vivo while also ensuring user-friendliness. It exhibited potential in prolonging the lifespan of adhesive restorations in clinical settings. In addition, it holds significant promise in the fields of caries and dentin sensitivity treatment and collagen-based tissue engineering scaffolds.

Purpose: Tissue engineering aims to recreate natural cellular environments to facilitate tissue regeneration. Gelatin methacrylate (GelMA) is widely utilized for its biocompatibility, ability to support cell adhesion and proliferation, and adjustable mechanical characteristics. This study developed a GelMA and graphene bioink platform at concentrations of 1, 1.5, and 2 mg/mL to enhance scaffold properties for tissue engineering applications., Patients and Methods: Graphene was incorporated into GelMA matrices to improve mechanical strength and electrical conductivity of the bioinks. The compressive strength and thermal stability of the resulting GelMA/graphene scaffolds were assessed through DSC analysis and mechanical testing. Cytotoxicity assays were conducted to determine cell survival rates. Cryoprinting at -30°C was employed to preserve scaffold structure and function. The chorioallantoic membrane (CAM) assay was used to evaluate biocompatibility and angiogenic potential., Results: The integration of graphene significantly amplified the compressive strength and thermal stability of GelMA scaffolds. Cytotoxicity assays indicated robust cell survival rates of 90%, confirming the biocompatibility of the developed materials. Cryoprinting effectively preserved scaffold integrity and functionality. The CAM assay validated the biocompatibility and angiogenic potential, demonstrating substantial vascularization upon scaffold implantation onto chick embryo CAM., Conclusion: Integrating graphene into GelMA hydrogels, coupled with low-temperature 3D printing, represents a potent strategy for enhancing scaffold fabrication. The resultant GelMA/graphene scaffolds exhibit superior mechanical properties, biocompatibility, and pro-vascularization capabilities, making them highly suitable for diverse tissue engineering and regenerative medicine applications., Competing Interests: The authors report no conflicts of interest in this work., (© 2024 Santana et al.)

Multifunctional colloidal microgels that exhibit stimuli-responsive behaviour and excellent biocompatibility have attracted particular attention for developing functional compartmentalized networks. Herein, a series of stimuli-responsive microgels (M0, M1, and M2) were designed through the copolymerization of di(ethylene glycol) methyl ether methacrylate (DEGMA) and methacrylic acid (MAA) monomers using hydroxy ethyl methacrylate-coupled azobenzene (HEMA-Az) and ethylene glycol dimetharylate (EGDMA) as crosslinkers. The behaviour of the microgels in response to temperature, pH, and light was thoroughly investigated using spectroscopic, microscopic, and light-scattering techniques. Interestingly, the microgels deswelled with an increase in temperature, decrease in pH, and under the irradiation of UV light. Such a reversible swelling/deswelling behaviour was exploited for microgel M2, which showed better photoactuation at pH 5 with a higher fluid pumping velocity. The actuating microgel M2 was optimized for loading the drug ciprofloxacin (Cf) to study its release at different temperature, pH, and light conditions. Microgel M2 exhibited photoresponsive Cf release at pH 5 and 37 °C, demonstrating its potential for application in on-demand drug release.

Given the variability in wounds based on the underlying causes, personalized medicine and tailored care for patients with wounds are required to ensure optimal therapeutic outcomes. With the emergence of high-precision and high-efficiency photocuring 3D printing technology, there is the potential for its use in customizing precise shapes that can match complex wound sites, thereby providing better treatment for patients with wound infections. In this work, porphyrinic metal-organic framework (MOF) crystals, serving as the functional filler, were incorporated into gelatin methacrylate (GelMA) as a photocurable composite resin to investigate the capabilities of producing customizable wound dressings through vat photopolymerization 3D printing. The embedded MOF crystals allow for better control of the photopolymerization process due to photon competition with the photoinitiator, enabling the precise printing of complex structures. In addition, these crystals impart photothermal and photodynamic capabilities to the printed object. The antibacterial assay confirms the potent photothermal and photodynamic bactericidal properties of the printed GelMA/MOF hydrogels. The hydrogel with the highest MOF content exhibited over 99.99% antibacterial efficiency against both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli after 30 min of light exposure (∼30 mW/cm 2 , λ ≥ 420 nm). Simultaneously, hemolysis and cytotoxicity evaluations validated their excellent biocompatibility. The findings presented here introduce a strategy for integrating photosensitive MOF and 3D printing to fabricate size-adjustable photothermal/photodynamic monoliths and patches, opening perspectives toward personalized treatment for wound management.

The establishment of organotypic preclinical models that accurately resemble the native tumor microenvironment at an anatomic human scale is highly desirable to level up in vitro platforms potential for screening candidate therapies. The bioengineering of anatomic-scaled three-dimensional (3D) models that emulate native tumor scale while recapitulating their cellular and matrix components remains, however, to be fully realized. In this focus, herein, we leveraged embedded 3D bioprinting for biofabricating pancreatic ductal adenocarcinoma (PDAC) in vitro models combining gelatin-methacryloyl and hyaluronic acid methacrylate extracellular matrix (ECM)-mimetic biomaterials with human pancreatic cancer cells and cancer-associated fibroblasts to generate in vitro models capable of emulating native tumor size (∼6 mm) and stromal elements. By using a viscoelastic continuous polymeric supporting bath, tumor-scale 3D models were rapidly generated (∼50 constructs/h) and easily recovered following in-bath visible light photocrosslinking. As a proof-of-concept, tissue-scale constructs displaying physiomimetic designs were biofabricated. These models also encompass the incorporation of a stromal compartment to better emulate the cellular components of the PDAC native tumor microenvironment (TME) and its stratified spatial organization. Cell-laden tumor-size constructs remained viable for up to 14 days and were responsive to Gemcitabine in a dose-dependent mode. Cancer-stroma models also exhibited increased drug resistance compared to their monotypic counterparts, highlighting the key role of stromal cells in chemotherapeutic resistance. Overall, we report for the first time the freeform biofabrication of PDAC models exhibiting anatomic scale, different structural complexities, and engineered cancer-stromal compartments, being highly valuable for preclinical screening of therapeutics.

Natural polymers and synthetic polymers have been extensively studied as scaffold materials, with the former offering advantages such as biocompatibility, biodegradability, and structural similarity to the natural extracellular matrix (ECM). However, the use of natural polymers in extrusion-based 3D printing has been limited by their poor mechanical properties and challenging rheological properties. In this study, gelatin and sodium alginate were utilized as scaffold materials, with the addition of Ca 2+ and Mg 2+ components to enhance their physical and chemical properties, and influence early cell behavior. Subsequently, these materials were fabricated into scaffolds using 3D printing. Our results demonstrated that the addition of Ca 2+ and Mg 2+ could improve the compactness of the 3D network structure, mechanical strength, swelling properties and degradation properties of methacrylated gelatin/methacrylated sodium alginate (GelMA/SAMA) composite hydrogel. In vitro cell tests revealed that the GelMA/SAMA composite hydrogel exhibited negligible cytotoxicity and promoted early cell viability, particularly with the higher concentration of Mg 2+ in the material. Notably, the extrusion 3D printing process successfully produced GelMA/SAMA scaffolds. These results collectively indicate that GelMA/SAMA composite scaffolds hold promise as potential biomaterials for tissue engineering applications.

Granular hydrogels comprised of jammed, crosslinked microgels offer great potential as biomaterial scaffolds for cell-based therapies, including for cartilage tissue regeneration. As stiffness and porosity of hydrogels affect the phenotype of encapsulated cells and the extent of tissue regeneration, the design of tunable granular hydrogels to control and optimize these parameters is highly desirable. We hypothesized that chondrogenesis could be modulated using a granular hydrogel platform based on biocompatible, zwitterionic materials with independent intra- and inter-microgel crosslinking mechanisms. Microgels are made with mechanical fragmentation of photocrosslinked zwitterionic carboxybetaine acrylamide (CBAA) and sulfobetaine methacrylate (SBMA) hydrogels, and secondarily crosslinked in the presence of cells using horseradish peroxide (HRP) to produce cell-laden granular hydrogels. We varied the intra-microgel crosslinking density to produce microgels with varied stiffnesses (1-3 kPa) and swelling properties. These microgels, when resuspended at the same weight fraction and secondarily crosslinked, resulted in granular hydrogels with distinct porosities (5-40%) due to differing swelling properties. The greatest extent of chondrogenesis was achieved in scaffolds with the highest microgel stiffness and highest porosity. However, when scaffold porosity was kept constant and just microgel stiffness varied, cell phenotype and chondrogenesis were similar across scaffolds. These results indicate the dominant role of granular scaffold porosity on chondrogenesis, whereas microgel stiffness appears to play a relatively minor role. These observations are in contrast to cells encapsulated within conventional bulk hydrogels, where stiffness has been shown to significantly affect chondrocyte response. In summary, we introduce chemically-defined, zwitterionic biomaterials to fabricate versatile granular hydrogels allowing for tunable scaffold porosity and microgel stiffness to study and influence chondrogenesis.

Microrobots hold broad application prospects in the field of precision medicine, such as intravenous drug injection, tumor resection, opening blood vessels and imaging during abdominal surgery. However, the rapid and controllable preparation of biocompatible hydrogel microparticles still poses challenges. This study proposes the one-step direct acquisition of biocompatible sodium alginate and gelatin methacrylate (GelMA) hydrogel microparticles using an oil-free aqueous solution, ensuring production with a controllable generation frequency. An adaptive interface shearing platform is established to fabricate alginate/GelMA microparticles using a mixture of the hydrogel, photoinitiator, and Fe 3 O 4 nanoparticles (NPs). By adjusting the static magnetic field intensity ( B s ), vibration frequency, and flow rate ( Q ) of the dispersed phase, the size and morphology of the hydrogel microparticles can be controlled. These hydrogel microparticle robots exhibit magnetic responsiveness, demonstrating precise rotating and rolling movements under the influence of an externally rotating magnetic field (RMF). Moreover, hydrogel microparticle robots with a specific critical frequency ( C f ) can be customized by adjusting the B s and the concentration of Fe 3 O 4 NPs. The directional in situ untethered motion of the hydrogel microparticle robots can be successfully realized and accurately controlled in the climbing over obstacles and in vitro experiments of animals, respectively. This versatile and fully biodegradable microrobot has the potential to precisely control movement to bone tissue and the natural cavity of the human body, as well as drug delivery.

Diabetic foot ulcer (DFU) is a common and severe complication of diabetes characterized by wound neuropathy, ischemia, and susceptibility to infection, making its treatment difficult. Dressings are commonly used in treating diabetic wounds; however, they have disadvantages, including lack of flexibility and mechanical strength, lack of coagulation activity, resistance to biodegradation, and low drug delivery efficiency. Developing more effective strategies for diabetic wound treatment has become a new focus. Microneedles (MN) can be used as a drug delivery platform for DFU wounds, allowing safe, effective, painless and minimally invasive medication administration through the skin. Herein, PDA@Ag/SerMA microneedles were prepared by combining the photothermal properties of polydopamine (PDA), the antimicrobial properties of argentum (Ag), and the ability of sericin methacryloyl (SerMA) to promote cell mitosis to accelerate wound healing and treat diabetic ulcer wounds. The results revealed that PDA@Ag/SerMA microneedles exhibited approximately 100% antimicrobial efficacy against Staphylococcus aureus and Escherichia coli under 808 nm near-infrared (NIR) irradiation. Furthermore, the wound healing rate of mice reached 95% within 12 days, which demonstrated the excellent antibacterial properties and wound healing efficacy of PDA@Ag/SerMA microneedles at cellular and animal levels, providing a potential solution for treating DFU.

Background: The challenge in treating irreversible nerve tissue damage has resulted in suboptimal outcomes for spinal cord injuries (SCI), underscoring the critical need for innovative treatment strategies to offer hope to patients., Methods: In this study, gelatin methacrylic acid hydrogel scaffolds loaded with nerve growth factors (GMNF) were prepared and used to verify the performance of SCI. The physicochemical and biological properties of the GMNF were tested. The effect of GMNF on activity of neuronal progenitor cells (NPCs) was investigated in vitro. Histological staining and motor ability was carried out to assess the ability of SCI repair in SCI animal models., Results: Achieving nerve growth factors sustained release, GMNF had good biocompatibility and could effectively penetrate into the cells with good targeting permeability. GMNF could better enhance the activity of NPCs and promote their directional differentiation into mature neuronal cells in vitro, which could exert a good neural repair function. In vivo, SCI mice treated with GMNF recovered their motor abilities more effectively and showed better wound healing by macroscopic observation of the coronal surface of their SCI area. Meanwhile, the immunohistochemistry demonstrated that the GMNF scaffolds effectively promoted SCI repair by better promoting the colonization and proliferation of neural stem cells (NSCs) in the SCI region and targeted differentiation into mature neurons., Conclusion: The application of GMNF composite scaffolds shows great potential in SCI treatment, which are anticipated to be a potential therapeutic bioactive material for clinical application in repairing SCI in the future., Competing Interests: The authors declare that they have no competing interests., (© 2024 Shen et al.)

The scarcity of the antifungal drug arsenal highlights an urgent need to develop alternative treatments for candidiasis caused by Candida albicans ( C. albicans ). As pH is closely associated with C. albicans infection, it could be an essential target in a novel approach for designing antifungal therapy. In this study, a novel intelligent antifungal monomer, dodecylmethylaminoethyl methacrylate (DMAEM), with a pH-responsive tertiary amine group and a methacrylate-derived CC double bond group is developed. It is uncovered that the two functional groups of DMAEM contribute to a dual mode of action. Under acidic pH, the tertiary amine of DMAEM protonates into a cationic fungicide, sharing similar structural and functional characteristics with quaternary ammonium salts, which exerts fungicidal activity by targeting the CHK1 two-component system in C. albicans . At neutral pH, the methacrylate-derived CC double bond group contributes to anti-virulence activity by blocking hyphal formation. In addition, it is also identified that DMAEM suppresses filamentation by altering the extracellular vesicles of C. albicans . These findings support that the novel intelligent pH-responsive monomer could be a therapeutic candidate for treating candidiasis.

Hydrogels of biopolymers are gradually substituting synthetic hydrogels in tissue engineering applications due to their properties. However, biopolymeric hydrogels are difficult to standardize because of the intrinsic variability of the material and the reversibility of physical crosslinking processes. In this work, we synthesized a photocrosslinkable derivative of chitosan (Cs), namely methacrylated chitosan (CsMA), in which the added methacrylic groups allow the formation of hydrogels through radical polymerization triggered by UV exposure. We then performed a systematic study to link the physical properties of the materials to its preparation parameters to standardize its preparation according to specific applications. We studied the properties of CsMA solutions and the derived hydrogels using a statistical method, namely, response surface method, which allowed us to build empirical models describing material properties in terms of several selected processing factors. In particular, we studied the viscosity of CsMA solutions as a function of CsMA concentration, temperature, and shear rate, while hydrogel compression modulus, morphology, degradation and solubilization were investigated as a function of CsMA concentration, photoinitiator concentration and UV exposure. CsMA solutions resulted in shear thinning and were thus suitable for extrusion-based 3D printing. The CsMA hydrogel was found to be highly tunable, with a stiffness in the 12-64 kPa range, and was stable over a long timeframe (up to 60 days). Finally, the possibility to engineer hydrogel stiffness through an empirical model allowed us to hypothesize a number of possible applications based on the mechanical properties of several biological tissues reported in the literature.

Mesenchymal stem cell-derived exosomes (MSC-Exos) have emerged as promising candidates for cell-free therapy in tissue regeneration. However, the native osteogenic and angiogenic capacities of MSC-Exos are often insufficient to repair critical-sized bone defects, and the underlying immune mechanisms remain elusive. Furthermore, achieving sustained delivery and stable activity of MSC-Exos at the defect site is essential for optimal therapeutic outcomes. Here, we extracted exosomes from osteogenically pre-differentiated human bone marrow mesenchymal stem cells (hBMSCs) by ultracentrifugation and encapsulated them in gelatin methacryloyl (GelMA) hydrogel to construct a composite scaffold. The resulting exosome-encapsulated hydrogel exhibited excellent mechanical properties and biocompatibility, facilitating sustained delivery of MSC-Exos. Osteogenic pre-differentiation significantly enhanced the osteogenic and angiogenic properties of MSC-Exos, promoting osteogenic differentiation of hBMSCs and angiogenesis of human umbilical vein endothelial cells (HUVECs). Furthermore, MSC-Exos induced polarization of Raw264.7 cells from a pro-inflammatory phenotype to an anti-inflammatory phenotype under simulated inflammatory conditions, thereby creating an immune microenvironment conducive to osteogenesis. RNA sequencing and bioinformatics analysis revealed that MSC-Exos activate the p53 pathway through targeted delivery of internal microRNAs and regulate macrophage polarization by reducing DNA oxidative damage. Our study highlights the potential of osteogenic exosome-encapsulated composite hydrogels for the development of cell-free scaffolds in bone tissue engineering., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Inc.)

In recent years, biological 3D printing has garnered increasing attention for tissue and organ repair. The challenge with 3D-printing inks is to combine mechanical properties as well as biocompatibility. Proteins serve as vital structural components in living systems, and utilizing protein-based inks can ensure that the materials maintain the necessary biological activity. In this study, we incorporated two natural biomaterials, silk fibroin (SF) and collagen (COL), into a low-concentration sodium alginate (SA) solution to create novel composite inks. SF and COL were modified with glycidyl methacrylate (GMA) to impart photo-cross-linking properties. The UV light test and 1 H NMR results demonstrated successful curing of silk fibroin (SF) and collagen (COL) after modification and grafting. Subsequently, the printability of modified silk fibroin (RSFMA)/SA with varying concentration gradients was assessed using a set of three consecutive printing models, and the material's properties were tested. The research results prove that the addition of RSFMA and ColMA enhances the printability of low-concentration SA solutions, with the Pr values increasing from 0.85 ± 0.02 to 0.90 ± 0.03 and 0.92 ± 0.02, respectively, and the mechanical strength increasing from 0.19 ± 0.01 to 0.28 ± 0.01 and 0.38 ± 0.01 MPa; cytocompatibility has also been improved. Furthermore, rheological tests indicated that all of the inks exhibited shear thinning properties. CCK-8 experiments demonstrated that the addition of ColMA increased the cytocompatibility of the ink system. Overall, the utilization of SF and COL-modified SA materials as inks represents a promising advancement in 3D-printed ink technology.

Here, we demonstrate that the spatial distribution of lipophilic cations governs the complexation pathways, serum stability, and biological performance of polymer-pDNA complexes (polyplexes). Previous research focused on block/statistical copolymers, whereas gradient copolymers, where the density of lipophilic cations diminishes (gradually or steeply) along polymer backbones, remain underexplored. We engineered gradient copolymers that combine the polyplex colloidal stability of block copolymers with the transfection efficiency of statistical copolymers. We synthesized length- and compositionally equivalent gradient copolymers ( G1 - G3 ) along with statistical ( S ) and block ( B ) copolymers of 2-(diisopropylamino)ethyl methacrylate and 2-hydroxyethyl methacrylate. We mapped how polymer microstructure governs pDNA loading per polyplex, pDNA conformational changes, and polymer-pDNA binding thermodynamics via static light scattering, circular dichroism spectroscopy, and isothermal titration calorimetry, respectively. While gradient steepness is a powerful design handle to improve polyplex physical properties, augment pDNA delivery capacity, and attenuate polycation-triggered hemolysis, microstructural contrasts did not elicit differences in complement activation.

Polymer self-assemblies driven by enthalpic interactions, such as hydrogen bonding and electrostatic interactions, exhibit distinct properties compared to those driven by hydrophobic interactions. Carbohydrate-carbohydrate interactions, which are observed in physiological phenomena, also fall under enthalpic interactions. Our group previously reported on self-assemblies of methacrylate-type glycopolymers carrying mannose units in the presence of calcium ions; however, a detailed study of these interactions was lacking. In this work, we investigated the interactions between glycopolymers using the quartz crystal microbalance (QCM) method. Our quantitative analysis revealed that the interactions between the glycopolymers were influenced by the carbohydrate structures in the side chains, the types of divalent metal ions, and the structures of the polymer main chains. Notably, the strongest interaction was observed in the combination of methacrylate-type glycopolymers carrying mannose units and calcium ions, demonstrating their potential as a driving force for polymer self-assembly.

The structure of zwitterion has great impact on the separation properties of zwitterionic hydrophilic stationary phases. To better understand the role of anionic groups of zwitterions, a novel carboxybetaine-based zwitterionic monolithic column was first prepared through thermo-initiated copolymerization of functional monomer (3-acrylamidopropyl)-dimethyl-(2-carboxymethyl) ammonium (CBAA) and crosslinker ethylene dimethacrylate (EDMA) within 100 μm ID capillary. The optimal poly(CBAA-co-EDMA) monolithic column exhibited satisfactory mechanical and chemical stability, good repeatability, high column efficiency (96,000 plates/m), and excellent separation performance for different classes of polar compounds (i.e., phenols, monophosphate nucleotides, urea and allantoin). A comparative study was then performed among three zwitterionic hydrophilic stationary phases containing different anionic groups, i.e. poly(CBAA-co-EDMA) (carboxybetaine), poly(2-{2-(methacryloyloxy) ethyldimethylammonium}ethyl n-butyl phosphate-co-EDMA) (phosphocholine), and poly(N,N-dimethyl-N-(3-methacrylamidopropyl)-N-(3-sulfopropyl) ammonium betaine-co-EDMA) (sulfobetaine) using benzoic acid derivatives, amine compounds, nucleobases and nucleosides as model analytes. The carboxybetaine-based monolithic column exhibited much higher positive zeta-potential and hydrophilicity, which endows it with a stronger retention capacity for acidic and neutral compounds, but sulfobetaine-based monolithic column exhibited much higher selectivity and retention capacity for the amines. Moreover, their enrichment efficiencies for N-glycopeptides were also evaluated based on their different hydrophilicity, and it was observed that the poly(CBAA-co-EDMA) monolithic material captured 4-8 times more N-glycopeptides compared to the other two materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

The application of patch methods for repairing abdominal wall wounds presents a variety of challenges, such as adhesion and limited mobility due to inadequate mechanical strength and nonabsorbable materials. Among these complications, postoperative visceral adhesion and wound infection are particularly serious. In this study, a bilayered composite patch with a gelatin methacryloyl (GelMA)/sodium alginate (SA)-vancomycin (Van)@polycaprolactone (PCL) (GelMA/SA-Van@PCL) antibacterial layer was prepared via coaxial 3D printing and a polycaprolactone (PCL)-silicon dioxide (SiO 2 ) antiadhesive layer (PCL-SiO 2 ) was prepared via electrospinning and electrostatic spray for hernia repair. The evaluation of the physicochemical properties revealed that the composite patch had outstanding tensile properties (16 N cm -1 ), excellent swelling (swelling rate of 243.81 ± 12.52%) and degradation (degradation rate of 53.14 ± 3.02%) properties. Furthermore, the composite patch containing the antibiotic Van exhibited good antibacterial and long-term drug release properties. Both in vivo and in vitro experiments indicated that the composite patch displayed outstanding biocompatibility and antiadhesive properties and could prevent postoperative infections. In summary, the bilayered composite patch can effectively prevent postoperative complications while promoting tissue growth and repair and holds significant application potential in hernia repair.