Search

Stalk lodging contributes to significant crop yield losses. Therefore, understanding the biomechanical strength and structural rigidity of grain stalks can contribute to improving stalk lodging resistance in crops. From the structural constituents of the stalk, the rind provides the principal structure, supporting cells against tension and bending loads. In this work, the biomechanical and viscoelastic behavior of the rind from the internodes of two sweet sorghum varieties (Della and REDforGREEN (RG)), grown in two different growing seasons, were evaluated by three-point micro-bending tests using a dynamic mechanical analyzer (DMA). In addition, the chemical composition of rinds and the microfibril angle (MFA) of the cell wall were determined using XRD. The results revealed that the biomechanical behavior of Della varieties was stiffer and more resistant to loads than that of RG varieties. Two features of the rind biomechanical properties, flexural modulus (FM) and flexural strength (FS), showed a significant reduction for RG. Particularly, a reduction in FS of 16–37% and in FM of 22–41% were detected for RG1. Changes in the stalks' rind biomechanical properties were attributed to cell wall components. Total lignin and glucan/cellulose contents were positively correlated with the FM and FS of the rind. Subsequently, an increase in the two cell wall components drove an increase in stiffness. Furthermore, the MFA of the rind was also found to influence the rind strength. [ABSTRACT FROM AUTHOR]

Corrugated cardboard (CCB) comprises a substantial portion of municipal solid waste, of which ~5% is wax coated CCB (WCCB) to enhance its performance. WCCB cannot be recycled, making it a suitable resource to recover wax and produce char. The WCCB was characterized for its extractable wax, lignin, and carbohydrate contents and by thermogravimetric analysis to study its thermal degradation behavior. WCCB was preliminarily examined by pyrolysis‐gas chromatography–mass spectrometry to determine product composition. WCCB samples were then pyrolyzed in auger and tube reactors at 450, 500, and 550°C, and their pyrolysis wax‐oil and char products characterized. WCCB and char were subjected to proximate, ultimate, surface area, analyses. The highest char yield was 36% at 450°C, and the highest wax‐oil yield was 53% at 550°C in the tube reactor. The wax‐oil fraction contained mainly alkanes, alkenes, and dienes (C9–C36), and chain length decreased with pyrolysis temperature. This wax fraction could be recovered and used as bunker fuel (C12–C40) or further converted to diesel (C10–C20). [ABSTRACT FROM AUTHOR]