Search

To investigate the predictive value of CT-derived fractional flow reserve (FFRPatients undergoing CABG with both pre- and post-operative coronary computed tomographic angiography (CCTA) were retrospectively included. Preoperative CCTA studies were used to evaluate anatomical and FFRA total of 270 anastomoses were identified in 88 enrolled patients. Forty-one anastomoses from 30 patients exhibited occlusion during a follow-up of 15.3 months after CABG. The occluded group had significantly increased prevalence of non-severe DS (58.5% vs. 40.2%; p = 0.023) and non-significant FFRFFR• FFR

Background Coronary artery calcification (CAC) is an independent risk factor of major adverse cardiovascular events; however, the impact of CAC on in-hospital death and adverse clinical outcomes in patients with coronavirus disease 2019 (COVID-19) remains unclear. Objective To explore the association between CAC and in-hospital mortality and adverse events in patients with COVID-19. Methods This multicenter retrospective cohort study enrolled 2067 laboratory-confirmed COVID-19 patients with definitive clinical outcomes (death or discharge) admitted from 22 tertiary hospitals in China between January 3, 2020 and April 2, 2020. Demographic, clinical, laboratory results, chest CT findings, and CAC on admission were collected. The primary outcome was in-hospital death and the secondary outcome was composed of in-hospital death, admission to intensive care unit (ICU), and requiring mechanical ventilation. Multivariable Cox regression analysis and Kaplan–Meier plots were used to explore the association between CAC and in-hospital death and adverse clinical outcomes. Results The mean age was 50 years (SD,16) and 1097 (53.1%) were male. A total of 177 patients showed high CAC level, and compared with patients with low CAC, these patients were older (mean age: 49 vs. 69 years, P

To investigate the utility of coronary CT angiography–derived fractional flow reserve (FFRCT) and plaque progression in patients undergoing serial coronary CT angiography for predicting major adverse cardiovascular events (MACE). This retrospective study evaluated patients suspected or known coronary artery disease who underwent serial coronary CT angiography examinations between January 2006 and December 2017 and followed up until June 2019. The primary endpoint was MACE, defined as acute coronary syndrome, rehospitalization due to progressive angina, percutaneous coronary intervention, or cardiac death. FFRCT and plaque parameters were analyzed on a per-vessel and per-patient basis. Univariable and multivariable COX regression analysis determined predictors of MACE. The prognostic value of FFRCT and plaque progression were assessed in nested models. Two hundred eighty-four patients (median age, 61 years (interquartile range, 54–70); 202 males) were evaluated. MACE was observed in 45 patients (15.8%, 45/284). By Cox multivariable regression modeling, vessel-specific FFRCT ≤ 0.80 was associated with a 2.4-fold increased risk of MACE (HR (95% CI): 2.4 (1.3–4.4); p = 0.005) and plaque progression was associated with a 9-fold increased risk of MACE (HR (95% CI): 9 (3.5–23); p < 0.001) after adjusting for clinical and imaging risk factors. FFRCT and plaque progression improved the prediction of events over coronary artery calcium (CAC) score and high-risk plaques (HRP) in the receiver operating characteristics analysis (area under the curve: 0.70 to 0.86; p = 0.002). Fractional flow reserve and plaque progression assessed by serial coronary CT angiography predicted the risk of future MACE. • Vessel-specific CT angiography–derived fractional flow reserve (FFR CT ) ≤ 0.80 and plaque progression improved the prediction of events over current risk factors. • Major adverse cardiovascular events (MACE) significantly increased with the presence of plaque progression at follow-up stratified by the FFR CT change group.

This study investigated the impact of machine learning (ML)–based fractional flow reserve derived from computed tomography (FFRCT) compared to invasive coronary angiography (ICA) for therapeutic decision-making and patient outcome in patients with suspected coronary artery disease (CAD). One thousand one hundred twenty-one consecutive patients with stable chest pain who underwent coronary computed tomography angiography (CCTA) followed ICA within 90 days between January 2007 and December 2016 were included in this retrospective study. Medical records were reviewed for the endpoint of major adverse cardiac events (MACEs). FFRCT values were calculated using an artificial intelligence (AI) ML platform. Disagreements between hemodynamic significant stenosis via FFRCT and severe stenosis on qualitative CCTA and ICA were also evaluated. After FFRCT results were revealed, a change in the proposed treatment regimen chosen based on ICA results was seen in 167 patients (14.9%). Over a median follow-up time of 26 months (4–48 months), FFRCT ≤ 0.80 was associated with MACE (HR, 6.84 (95% CI, 3.57 to 13.11); p < 0.001), with superior prognostic value compared to severe stenosis on ICA (HR, 1.84 (95% CI, 1.24 to 2.73), p = 0.002) and CCTA (HR, 1.47 (95% CI, 1.01 to 2.14, p = 0.045). Reserving ICA and revascularization for vessels with positive FFRCT could have reduced the rate of ICA by 54.5% and lead to 4.4% fewer percutaneous interventions. This study indicated ML-based FFRCT had superior prognostic value when compared to severe anatomic stenosis on CCTA and adding FFRCT may direct therapeutic decision-making with the potential to improve efficiency of ICA. • ML-based FFR CT shows superior outcome prediction value when compared to severe anatomic stenosis on CCTA. • FFR CT noninvasively informs therapeutic decision-making with potential to change diagnostic workflows and enhance efficiencies in patients with suspected CAD. • Reserving ICA and revascularization for vessels with positive FFR CT may reduce the normalcy rate of ICA and improve its efficiency.

Objectives The aim of this study was to validate the feasibility of a novel structural and computational fluid dynamics–based fractional flow reserve (FFR) algorithm for coronary computed tomography angiography (CTA), using alternative boundary conditions to detect lesion-specific ischemia. Background A new model of computed tomographic (CT) FFR relying on boundary conditions derived from structural deformation of the coronary lumen and aorta with transluminal attenuation gradient and assumptions regarding microvascular resistance has been developed, but its accuracy has not yet been validated. Methods A total of 338 consecutive patients with 422 vessels from 9 Chinese medical centers undergoing CTA and invasive FFR were retrospectively analyzed. CT FFR values were obtained on a novel on-site computational fluid dynamics–based CT FFR (uCT-FFR [version 1.5, United-Imaging Healthcare, Shanghai, China]). Performance characteristics of uCT-FFR and CTA in detecting lesion-specific ischemia in all lesions, intermediate lesions (luminal stenosis 30% to 70%), and “gray zone” lesions (FFR 0.75 to 0.80) were calculated with invasive FFR as the reference standard. The effect of coronary calcification on uCT-FFR measurements was also assessed. Results Per vessel sensitivities, specificities, and accuracies of 0.89, 0.91, and 0.91 with uCT-FFR, 0.92, 0.34, and 0.55 with CTA, and 0.94, 0.37, and 0.58 with invasive coronary angiography, respectively, were found. There was higher specificity, accuracy, and AUC for uCT-FFR compared with CTA and qualitative invasive coronary angiography in all lesions, including intermediate lesions (p 0.80; p = 0.397) and in patients with “gray zone” versus FFR ≤0.75 (p = 0.633) and versus FFR >0.80 (p = 0.364), respectively. No significant difference in the diagnostic performance of uCT-FFR was found between patients with calcium scores ≥400 and Conclusions This novel computational fluid dynamics–based CT FFR approach demonstrates good performance in detecting lesion-specific ischemia. Additionally, it outperforms CTA and qualitative invasive coronary angiography, most notably in intermediate lesions, and may potentially have diagnostic power in gray zone and highly calcified lesions.

To explore downstream management and outcomes of machine learning (ML)-based CT derived fractional flow reserve (FFRIn this prospective study conducted from April 2018 to March 2019, participants were assigned to either the CCTA or FFRIn total, 567 participants were allocated to the CCTA group and 566 to the FFRIn patients with intermediate stenosis, the FFR• In stable patients with intermediate stenosis, ML-based FFR

To propose a novel functional Coronary Artery Disease-Reporting and Data System (CAD-RADS) category system integrated with coronary CT angiography (CCTA)-derived fractional flow reserve (FFRFirstly, we proposed a novel functional CAD-RADS and evaluated the performance of functional CAD-RADS for guiding treatment strategies with actual clinical treatment as a reference standard in a retrospective multicenter cohort with CCTA and invasive FFR performed in all patients (n = 466). Net reclassification improvement (NRI) of functional CAD-RADS over anatomical CAD-RADS was calculated. Secondly, the prognostic value of functional CAD-RADS in a prospective two-arm cohort (566 [FFRFunctional CAD-RADS demonstrated superior value over anatomical CAD-RADS (AUC: 0.828 vs. 0.681, p0.001) and comparable performance to FFR (AUC: 0.828 vs. 0.848, p = 0.253) in guiding therapeutic decisions. Functional CAD-RADS resulted in the revision of management plan as determined by anatomical CAD-RADS in 30.0% of patients (n = 140) (NRI = 0.369, p0.001). Functional CAD-RADS was an independent predictor for 1-year outcomes with indexes of concordance of 0.795 and the corresponding value was 0.751 in anatomical CAD-RADS.The novel functional CAD-RADS gained incremental value in guiding therapeutic decision-making compared with anatomical CAD-RADS and comparable power in 1-year prognosis with anatomical CAD-RADS in a real-world scenario.• The novel functional CAD-RADS category system with FFR

The diagnostic performance of coronary computed tomography angiography-derived fractional flow reserve (CT-FFR) in detecting ischemia in myocardial bridging (MB) has not been investigated to date.This retrospective multicentre study included 104 patients with left anterior descending MBs. MB was classified as either superficial or deep, short, or long, whereas all MB vessels were further divided into50%, 50% to 69%, and ≥70% groups, according to proximal lumen stenosis on invasive coronary angiography. Diagnostic performance and receiver operating characteristics (ROC) of CT-FFR to detect lesion-specific ischemia was assessed on a per-vessel level, using invasive FFR as reference standard. Intraclass correlation coefficient (ICC) and Bland-Altman plots were used for agreement measurement.Forty-eight MB vessels (46.2%) showed ischemia by invasive FFR (≤0.80). Sensitivity, specificity, and accuracy of CT-FFR to detect functional ischemia were 0.96 (0.85 to 0.99), 0.84 (0.71 to 0.92), and 0.89 (0.81 to 0.94), respectively, in all MB vessels. There were no differences in diagnostic performance between superficial and deep MB or between short and long MB (all P0.05). The accuracy of CT-FFR was 0.96 (0.85 to 0.99) in ≥70% stenosis, 0.82 (0.67 to 0.91) in 50% to 69% stenosis, and 0.89 (0.51 to 0.99) in50% stenosis (P = 0.081). Bland-Altman analysis showed a slight mean difference between CT-FFR and invasive FFR of 0.014 (95% limit of agreement, -0.117 to 0.145). The ICC was 0.775 (95% confidence interval, 0.685-0.842, P0.001).CT-FFR demonstrated high diagnostic performance for identifying functional ischemia in vessels with MB and concomitant proximal atherosclerotic disease when compared with invasive FFR. However, the clinical use of CT-FFR in patients with MB needs further study for stronger and more robust results.

Purpose To evaluate the diagnostic performance of coronary computed tomography angiography derived fractional flow reserve (CT-FFR) with invasive fractional flow reserve (FFR) in patients with coronary artery disease" before "with invasive fractional flow reserve serving as the reference standard. Materials and methods CT-FFR values based on a machine learning algorithm (cFFRML) in 183 vessels of 136 patients from four centers were measured with invasive FFR as reference standard. The diagnostic performance from our multicenter study was combined into a meta-analysis following a literature search in Web of Science, PubMed, Cochrane library to identify studies comparing diagnostic performance of coronary computed tomography angiography (CCTA) and CT-FFR. Sensitivity, specificity, accuracy were analyzed on both per-vessel and per-patient basis for intermediate lesions and by algorithm. Results Our multicenter study demonstrated sensitivities, specificities, and accuracies of cFFRML and CCTA of 0.85, 0.94, 0.90, and 0.95, 0.28, 0.55 on a per-vessel basis, respectively. For our meta-analysis, pooled sensitivities, specificities, and accuracies of CT-FFR and CCTA were 0.85, 0.82, 0.82, and 0.85, 0.57, 0.65 with AUC of 0.86 (95%CI: 0.83˜0.89) and 0.83 (95%CI: 0.79˜0.86) on a per-vessel basis, respectively. The sensitivity, specificity and accuracy for intermediate lesions using cFFRML were 0.84, 0.92, and 0.89. No significant difference was found among different algorithms of CT-FFR (P Conslusion This multicenter study with meta-analysis showed that CT-FFR had a high diagnostic accuracy in determining ischemia-specific lesions and intermediate lesions. There was no significant difference when comparing the combined diagnostic performance of different algorithms of CT-FFR with invasive FFR as the reference standard.

To investigate the utility of coronary CT angiography-derived fractional flow reserve (FFRThis retrospective study evaluated patients suspected or known coronary artery disease who underwent serial coronary CT angiography examinations between January 2006 and December 2017 and followed up until June 2019. The primary endpoint was MACE, defined as acute coronary syndrome, rehospitalization due to progressive angina, percutaneous coronary intervention, or cardiac death. FFRTwo hundred eighty-four patients (median age, 61 years (interquartile range, 54-70); 202 males) were evaluated. MACE was observed in 45 patients (15.8%, 45/284). By Cox multivariable regression modeling, vessel-specific FFRFractional flow reserve and plaque progression assessed by serial coronary CT angiography predicted the risk of future MACE.• Vessel-specific CT angiography-derived fractional flow reserve (FFR

Background: The risk factors for adverse events of Coronavirus Disease-19 (COVID-19) have not been well described. We aimed to explore the predictive value of clinical, laboratory and CT imaging characteristics on admission for short-term outcomes of COVID-19 patients. Methods: This multicenter, retrospective, observation study enrolled 703 laboratory-confirmed COVID-19 patients admitted to 16 tertiary hospitals from 8 provinces in China between January 10, 2020 and March 13, 2020. Demographic, clinical, laboratory data, CT imaging findings on admission and clinical outcomes were collected and compared. The primary endpoint was in-hospital death, the secondary endpoints were composite clinical adverse outcomes including in-hospital death, admission to intensive care unit (ICU) and requiring invasive mechanical ventilation support (IMV). Multivariable Cox regression, Kaplan-Meier plots and log-rank test were used to explore risk factors related to in-hospital death and in-hospital adverse outcomes. Results: Of 703 patients, 55 (8%) developed adverse outcomes (including 33 deceased), 648 (92%) discharged without any adverse outcome. Multivariable regression analysis showed risk factors associated with in-hospital death included ≥ 2 comorbidities (hazard ratio [HR], 6.734; 95% CI; 3.239-14.003, p < 0.001), leukocytosis (HR, 9.639; 95% CI, 4.572-20.321, p < 0.001), lymphopenia (HR, 4.579; 95% CI, 1.334-15.715, p = 0.016) and CT severity score > 14 (HR, 2.915; 95% CI, 1.376-6.177, p = 0.005) on admission, while older age (HR, 2.231; 95% CI, 1.124-4.427, p = 0.022), ≥ 2 comorbidities (HR, 4.778; 95% CI; 2.451-9.315, p < 0.001), leukocytosis (HR, 6.349; 95% CI; 3.330-12.108, p < 0.001), lymphopenia (HR, 3.014; 95% CI; 1.356-6.697, p = 0.007) and CT severity score > 14 (HR, 1.946; 95% CI; 1.095-3.459, p = 0.023) were associated with increased odds of composite adverse outcomes. Conclusion: The risk factors of older age, multiple comorbidities, leukocytosis, lymphopenia and higher CT severity score could help clinicians identify patients with potential adverse events.

Aims This study was aimed at investigating whether a machine learning (ML)-based coronary computed tomographic angiography (CCTA) derived fractional flow reserve (CT-FFR) SYNTAX score (SS), ‘Functional SYNTAX score’ (FSSCTA), would predict clinical outcome in patients with three-vessel coronary artery disease (CAD). Methods and results The SS based on CCTA (SSCTA) and ICA (SSICA) were retrospectively collected in 227 consecutive patients with three-vessel CAD. FSSCTA was calculated by combining the anatomical data with functional data derived from a ML-based CT-FFR assessment. The ability of each score system to predict major adverse cardiac events (MACE) was compared. The difference between revascularization strategies directed by the anatomical SS and FSSCTA was also assessed. Two hundred and twenty-seven patients were divided into two groups according to the SSCTA cut-off value of 22. After determining FSSCTA for each patient, 22.9% of patients (52/227) were reclassified to a low-risk group (FSSCTA ≤ 22). In the low- vs. intermediate-to-high (>22) FSSCTA group, MACE occurred in 3.2% (4/125) vs. 34.3% (35/102), respectively (P Conclusion Recalculating SS by incorporating lesion-specific ischaemia as determined by ML-based CT-FFR is a better predictor of MACE in patients with three-vessel CAD. Additionally, the use of FSSCTA may alter selected revascularization strategies in these patients.

To investigate the effect of coronary calcification morphology and severity on the diagnostic performance of machine learning (ML)–based coronary CT angiography (CCTA)–derived fractional flow reserve (CT-FFR) with FFR as a reference standard. A total of 442 patients (61.2 ± 9.1 years, 70% men) with 544 vessels who underwent CCTA, ML-based CT-FFR, and invasive FFR from China multicenter CT-FFR study were enrolled. The effect of calcification arc, calcification remodeling index (CRI), and Agatston score (AS) on the diagnostic performance of CT-FFR was investigated. CT-FFR ≤ 0.80 and lumen reduction ≥ 50% determined by CCTA were identified as vessel-specific ischemia with invasive FFR as a reference standard. Compared with invasive FFR, ML-based CT-FFR yielded an overall sensitivity of 0.84, specificity of 0.94, and accuracy of 0.90 in a total of 344 calcification lesions. There was no statistical difference in diagnostic accuracy, sensitivity, or specificity of CT-FFR across different calcification arc, CRI, or AS levels. CT-FFR exhibited improved discrimination of ischemia compared with CCTA alone in lesions with mild-to-moderate calcification (AUC, 0.89 vs. 0.69, p < 0.001) and lesions with CRI ≥ 1 (AUC, 0.89 vs. 0.71, p < 0.001). The diagnostic accuracy and specificity of CT-FFR were higher than CCTA alone in patients and vessels with mid (100 to 299) or high (≥ 300) AS. Coronary calcification morphology and severity did not influence diagnostic performance of CT-FFR in ischemia detection, and CT-FFR showed marked improved discrimination of ischemia compared with CCTA alone in the setting of calcification. • CT-FFR provides superior diagnostic performance than CCTA alone regardless of coronary calcification. • No significant differences in the diagnostic performance of CT-FFR were observed in coronary arteries with different coronary calcification arcs and calcified remodeling indexes. • No significant differences in the diagnostic accuracy of CT-FFR were observed in coronary arteries with different coronary calcification score levels.

Background To diagnose pulmonary embolism (PE) in children and adults since evaluating tiny pulmonary vasculature beyond segmental level is a challenging and demanding task with thousands of images. Purpose To evaluate the effect of computer-assisted detection (CAD) on acute PE on CTPA in children and young adults by readers with varying experience levels. Material and Methods Six radiologists were retrospectively divided into three groups according to experience levels and assessed the CTPA studies on a per-emboli basis. All readers identified independently the PE presence, and ranked diagnostic confidence on a 5-point scale with and without CAD. Reading time, sensitivities, specificities, accuracies, positive predictive values (PPVs), and negative predictive values (NPVs) were calculated for each reading. Results The sensitivities and NPVs differed significantly in most readers ( P = 0.004, 0.001, 0.010, 0.010, and 0.012 for sensitivities and P = 0.011, 0.003, 0.016, 0.017, and 0.019 for NPVs) except for reader 6 ( P = 0.148 and 0.165, respectively), and the accuracies of all readers differed significantly (all P Conclusion At the expense of longer reading time, the use of the CAD algorithms improves sensitivities, NPVs, and the accuracies of readers in peripheral PE detection, especially for readers with a poor level of interpretation experience.

Myocardial bridging (MB) can promote atherosclerotic plaque formation proximal to the MB and further result in myocardial infarction. Evaluating the hemodynamic significance of MB with advanced noninvasive techniques, such as fractional flow reserve derived from coronary computed tomography

To investigate the effect of reader experience, calcification and image quality on the performance of deep learning (DL) powered coronary CT angiography (CCTA) in automatically detecting obstructive coronary artery disease (CAD) with invasive coronary angiography (ICA) as reference standard.A total of 165 patients (680 vessels and 1505 segments) were included in this study. Three sessions were performed in order: (1) The artificial intelligence (AI) software automatically processed CCTA images, stenosis degree and processing time were recorded for each case; (2) Six cardiovascular radiologists with different experiences (low/ intermediate/ high experience) independently performed image post-processing and interpretation of CCTA, (3) AI + human reading was performed. Luminal stenosis ≥50% was defined as obstructive CAD in ICA and CCTA. Diagnostic performances of AI, human reading and AI + human reading were evaluated and compared on a per-patient, per-vessel and per-segment basis with ICA as reference standard. The effects of calcification and image quality on the diagnostic performance were also studied.The average post-processing and interpretation times of AI was 2.3 ± 0.6 min per case, reduced by 76%, 72%, 69% compared with low/ intermediate/ high experience readers (all P 0.001), respectively. On a per-patient, per-vessel and per-segment basis, with ICA as reference method, the AI overall diagnostic sensitivity for detecting obstructive CAD were 90.5%, 81.4%, 72.9%, the specificity was 82.3%, 93.9%, 95.0%, with the corresponding areas under the curve (AUCs) of 0.90, 0.90, 0.87, respectively. Compared to human readers, the diagnostic performance of AI was higher than that of low experience readers (all P 0.001). The diagnostic performance of AI + human reading was higher than human reading alone, and AI + human readers' ability to correctly reclassify obstructive CAD was also improved, especially for low experience readers (Per-patient, the net reclassification improvement (NRI) = 0.085; per-vessel, NRI = 0.070; and per-segment, NRI = 0.068, all P 0.001). The diagnostic performance of AI was not significantly affected by calcification and image quality (all P 0.05).AI can substantially shorten the post-processing time, while AI + human reading model can significantly improve the diagnostic performance compared with human readers, especially for inexperienced readers, regardless of calcification severity and image quality.

Purpose. To assess the impact of sinogram-affirmed iterative reconstruction (SAFIRE) on risk category for coronary artery disease by combining coronary calcium score measurement and coronary CT angiography (CCTA). Materials and Methods. Eighty-nine patients (64.0% male) older than 18 years (64.4±10.3 years) underwent coronary artery calcium scanning and prospectively ECG-triggered sequential CCTA examination. All raw data acquired in coronary artery calcium scanning were reconstructed by both filtered back projection (FBP) and SAFIRE algorithms with 5 different levels. Objective image quality and calcium quantification were evaluated and compared between FBP and all SAFIRE levels by the Sphericity Assumed test or Greenhouse-Geisser ε correction coefficient. Coronary artery stenosis was assessed in CCTA. Risk categories of all patients and of the patients with coronary artery stenosis in CCTA were compared between FBP and all SAFIRE levels by the Friedman test. Results. The reconstruction protocol from traditional FBP to SAFIRE 5 was associated with a gradual reduction in CT value and image noise (P<0.001) but associated with a gradual improvement in the signal-to-noise ratio (P<0.001). There was a gradual reduction in coronary calcification quantification (Agatston score: from 73.5 in FBP to 38.1 in SAFIRE 5, P<0.001) from traditional FBP to SAFIRE 5. There was a significant difference for the risk category between FBP and all levels of SAFIRE in all patients (from 3.5 in FBP to 3.2 in SAFIRE 5, P<0.001) and in the patients with coronary artery stenosis in CCTA (from 4.0 in FBP to 3.6 in SAFIRE 5, P<0.001). Conclusions. SAFIRE significantly reduces coronary calcification quantification compared to FBP, resulting in the reduction of risk categories based on the Agatston score. The risk categories of the patients with coronary artery stenosis in CCTA may also decline. Thus, SAFIRE may lead risk categories to underestimate the existence of significant coronary artery stenosis.

To investigate the effect of image quality of coronary CT angiography (CCTA) on the diagnostic performance of a machine learning–based CT-derived fractional flow reserve (FFRCT). This nationwide retrospective study enrolled participants from 10 individual centers across China. FFRCT analysis was performed in 570 vessels in 437 patients. Invasive FFR and FFRCT values ≤ 0.80 were considered ischemia-specific. Four-score subjective assessment based on image quality and objective measurement of vessel enhancement was performed on a per-vessel basis. The effects of body mass index (BMI), sex, heart rate, and coronary calcium score on the diagnostic performance of FFRCT were studied. Among 570 vessels, 216 were considered ischemia-specific by invasive FFR and 198 by FFRCT. Sensitivity and specificity of FFRCT for detecting lesion-specific ischemia were 0.82 and 0.93, respectively. Area under the curve (AUC) of high-quality images (0.93, n = 159) was found to be superior to low-quality images (0.80, n = 92, p = 0.02). Objective image quality and heart rate were also associated with diagnostic performance of FFRCT, whereas there was no statistical difference in diagnostic performance among different BMI, sex, and calcium score groups (all p > 0.05, Bonferroni correction). This retrospective multicenter study supported the FFRCT as a noninvasive test in evaluating lesion-specific ischemia. Subjective image quality, vessel enhancement, and heart rate affect the diagnostic performance of FFRCT. • FFR CT can be used to evaluate lesion-specific ischemia. • Poor image quality negatively affects the diagnostic performance of FFR CT . • CCTA with ≥ score 3, intracoronary enhancement degree of 300–400 HU, and heart rate below 70 bpm at scanning could be of great benefit to more accurate FFR CT analysis.

OBJECTIVE To examine the fractional flow reserve derived from computed tomographic angiography (CT-FFR) in patients with anomalous origin of the right coronary artery from the left coronary sinus (R-ACAOS) with an interarterial course, assess the relationship of CT-FFR with the anatomical features of interarterial R-ACAOS on coronary computed tomographic angiography (CCTA), and determine its clinical relevance. MATERIALS AND METHODS Ninety-four patients with interarterial R-ACAOS undergoing CCTA were retrospectively included. Anatomic features (proximal vessel morphology [oval or slit-like], take-off angle, take-off level [below or above the pulmonary valve], take-off type, intramural course, % proximal narrowing area, length of narrowing, minimum luminal area [MLA] at systole and diastole, and vessel compression index) on CCTA associated with CT-FFR ≤ 0.80 were analyzed. Receiver operating characteristic analysis was performed to describe the diagnostic performance of CT-FFR ≤ 0.80 in detecting interarterial R-ACAOS. RESULTS Significant differences were found in proximal vessel morphology, take-off level, intramural course, % proximal narrowing area, and MLA at diastole (all p < 0.05) between the normal and abnormal CT-FFR groups. Take-off level, intramural course, and slit-like ostium (all p < 0.05) predicted hemodynamic abnormality (CT-FFR ≤ 0.80) with accuracies of 0.69, 0.71, and 0.81, respectively. Patients with CT-FFR ≤ 0.80 had a higher prevalence of typical angina (29.4% vs. 7.8%, p = 0.025) and atypical angina (29.4% vs. 6.5%, p = 0.016). CONCLUSION Take-off level, intramural course, and slit-like ostium were the main predictors of abnormal CT-FFR values. Importantly, patients with abnormal CT-FFR values showed a higher prevalence of typical angina and atypical angina, indicating that CT-FFR is a potential tool to gauge the clinical relevance in patients with interarterial R-ACAOS.

The aim of this study was to validate the feasibility of a novel structural and computational fluid dynamics-based fractional flow reserve (FFR) algorithm for coronary computed tomography angiography (CTA), using alternative boundary conditions to detect lesion-specific ischemia.A new model of computed tomographic (CT) FFR relying on boundary conditions derived from structural deformation of the coronary lumen and aorta with transluminal attenuation gradient and assumptions regarding microvascular resistance has been developed, but its accuracy has not yet been validated.A total of 338 consecutive patients with 422 vessels from 9 Chinese medical centers undergoing CTA and invasive FFR were retrospectively analyzed. CT FFR values were obtained on a novel on-site computational fluid dynamics-based CT FFR (uCT-FFR [version 1.5, United-Imaging Healthcare, Shanghai, China]). Performance characteristics of uCT-FFR and CTA in detecting lesion-specific ischemia in all lesions, intermediate lesions (luminal stenosis 30% to 70%), and "gray zone" lesions (FFR 0.75 to 0.80) were calculated with invasive FFR as the reference standard. The effect of coronary calcification on uCT-FFR measurements was also assessed.Per vessel sensitivities, specificities, and accuracies of 0.89, 0.91, and 0.91 with uCT-FFR, 0.92, 0.34, and 0.55 with CTA, and 0.94, 0.37, and 0.58 with invasive coronary angiography, respectively, were found. There was higher specificity, accuracy, and AUC for uCT-FFR compared with CTA and qualitative invasive coronary angiography in all lesions, including intermediate lesions (p 0.001 for all). No significant difference in diagnostic accuracy was observed in the "gray zone" range versus the other 2 lesion groups (FFR ≤0.75 and0.80; p = 0.397) and in patients with "gray zone" versus FFR ≤0.75 (p = 0.633) and versus FFR0.80 (p = 0.364), respectively. No significant difference in the diagnostic performance of uCT-FFR was found between patients with calcium scores ≥400 and 400 (p = 0.393).This novel computational fluid dynamics-based CT FFR approach demonstrates good performance in detecting lesion-specific ischemia. Additionally, it outperforms CTA and qualitative invasive coronary angiography, most notably in intermediate lesions, and may potentially have diagnostic power in gray zone and highly calcified lesions.

The modification mechanism of Sb on eutectic Si phase of Al-Si alloys was not understood very well. In this paper the modification effects of Sb on Al7SiMg alloy were investigated by computer aided cooling curve thermal analysis coupled with microstructure observation. The results show that the addition of Sb with 0.1%~0.25% amount has refining effect on eutectic Si phase, and this modification effect can be recorded by the cooling curve. The addition of Sb decreases the growth temperature of the eutectic solidification (TEG) by 5.0 °C to 7.8 °C, and this indicates that there is an undercooling effect with Sb modification. Moreover, faster cooling rate can obtain more superior morphology of eutectic Si, which can be changed from short rod to nearly granular particles. The morphology of eutectic Si is nearly unchanged with holding time extending from 0.5h to 2.5h, which means Sb has long modification effect for Al-Si alloys.

Sb is an effective additive to modify eutectic Si of Al-Si alloys and the modification mechanism has not yet been studied very clearly. In this paper, computer aided cooling curve thermal analysis and microstructure assessment were carried out to investigate the modification effects of Sb on Al7SiMg alloy. The results show that the Sb addition amount of 0.1~0.25% has improvement effect on eutectic Si morphology, which can be further confirmed from the thermal analysis results. The addition of Sb decreases the eutectic growth temperature by 5 °C to 7.8 °C, indicating an undercooling effect resulted from Sb modification. Compared to that of short rods, a better eutectic Si morphology of nearly granular particles can be obtained in a faster cooling rate. The length of silicon has been gradually shortened as holding time increased to 2.5 h from 0.5 h, which means a long period modification effect of Sb in Al-Si alloys. Owing to undercooling resulted from Sb addition in Al-Si alloys, the refinement structure of eutectic silicon can be achieved.

To evaluate the feasibility of fractional flow reserve (cFFR) derivation from coronary CT angiography (CCTA) in patients with myocardial bridging (MB), its relationship with MB anatomical features, and clinical relevance. This retrospective study included 120 patients with MB of the left anterior descending artery (LAD) and 41 controls. MB location, length, depth, muscle index, instance, and stenosis rate were measured. cFFR values were compared between superficial MB (≤ 2 mm), deep MB (> 2 mm), and control groups. Factors associated with abnormal cFFR values (≤ 0.80) were analyzed. MB patients demonstrated lower cFFR values in MB and distal segments than controls (all p

Purpose To compare the effect of dual-source dual-energy CT versus single-energy CT on DNA double-strand breaks (DSBs) in blood lymphocytes at CT pulmonary angiography (CTPA). Methods and materials Sixty-two patients underwent either dual-energy CTPA (Group 1: n = 21, 80/Sn140 kVp, 89/38 mAs; Group 2: n = 20, 100/Sn140 kVp, 89/76 mAs) or single-energy CTPA (Group 3: n = 21, 120 kVp, 110 mAs). Blood samples were obtained before and 5 min after CTPA. DSBs were assessed with fluorescence microscopy and Kruskal-Walls tests were used to compare DSBs levels among groups. Volume CT dose index (CTDIvol), dose length product (DLP) and organ radiation dose were compared using ANOVA. Results There were increased excess DSB foci per lymphocyte 5 min after CTPA examinations in three groups (Group 1: P = .001; Group 2: P = .001; Group 3: P = .006). There were no differences among groups regarding excess DSB foci/cell and percentage of excess DSBs (Group 1, 23%; Group 2, 24%; Group 3, 20%; P = .932). CTDIvol, DLP and organ radiation dose in Group 1 were the lowest among the groups (all P Conclusion DSB is increased following dual-source and single-source CTPA, while dual-source dual-energy CT protocols do not increase the estimated radiation dose and also do not result in a higher incidence of DNA DSBs in patients undergoing CTPA.

In order to save the costs of the rapid hardening and repair sulphoaluminate cement and improve its working performance, the effects of slag, fly ash, silica fume in different contents and different adding ways on the initial setting time and working performance of sulphoaluminate cement are studied. The results show that the initial setting time of single-doped slag and fly ash both meet the requirements of repair materials, but silica fume significantly cuts the cement’s initial setting time short, which does not meet the construction conditions for rapid hardening and repair. Ultimately it is determined that the mechanical properties of sulphoaluminate cement are the best when slag and fly ash are compound added by the content of 30% at 4:1 mass ratio and simultaneously the initial setting time meets the conditions for rapid hardening and repair.

The Bland–Altman method has been widely used for assessing agreement between two methods of measurement. However, it remains unsolved about sample size estimation. We propose a new method of sample size estimation for Bland–Altman agreement assessment. According to the Bland–Altman method, the conclusion on agreement is made based on the width of the confidence interval for LOAs (limits of agreement) in comparison to predefined clinical agreement limit. Under the theory of statistical inference, the formulae of sample size estimation are derived, which depended on the pre-determined level of α , β, the mean and the standard deviation of differences between two measurements, and the predefined limits. With this new method, the sample sizes are calculated under different parameter settings which occur frequently in method comparison studies, and Monte-Carlo simulation is used to obtain the corresponding powers. The results of Monte-Carlo simulation showed that the achieved powers could coincide with the pre-determined level of powers, thus validating the correctness of the method. The method of sample size estimation can be applied in the Bland–Altman method to assess agreement between two methods of measurement.

Safety assessment in clinical trials is dependent on an in-depth analysis of the adverse events to a great extent. However, there are difficulties in summary classification, data management and statistical analysis of the adverse events because of the different expressions on the same adverse events caused by regional, linguistic, ethnic, cultural and other differences. In order to ensure the normative expressions, it's necessary to standardize the terms in recording the adverse events. MedDRA (medical dictionary for regulatory activities) has been widely recommended and applied in the world as a powerful support for the adverse events reporting in clinical trials. In this paper, the development history, applicable scope, hierarchy structure, encoding term selection and standardized query strategies of the MedDRA is introduced. Furthermore, the practical process of adverse events encoding with MedDRA is proposed. Finally, the framework of statistical analysis about adverse events is discussed.

Investigate the effects of Rb1 on phagocytosis and the production of the pro-inflammatory cytokines and NO of murine macrophage, to elucidate the machanism of the immuno-regulating effect of Rb1.The single cell suspension of murine peritoneal macrophages was prepared under sterile condition. Then, the drug toxicology of different concent rations of Rb1 on macrophages was measured by MTT assay. The phagocytosis of macrophages to microbeads was observed through flow cytometry(FCM). The amount of NO produced in macrophages was detected by Griess kit. Used Cytometric Bead Arry(CBA) kit to detect the production of cytokines of Macrophages stimulated by LPS.In a dose-dependent manner, Rb1(5, 10, 20 μmol/L) can significantly inhibit the phagocytose of macrophage stimulated by LPS, but improve this ability of unactivated macrophage (P0.05). Rb1 can also reduce the production of NO by macrophage(P0.01). Rb1 can regulate the production of cytokines of macrophage stimulated by LPS.Rb1 can inhibit the transduction of LPS signals and regulate the content of cytokines, thus to decrease the production of NO. However, to the unactivated macrophages, Rb1 up-regulates phagocytic functions and promotes the innate immunity to resist invasion of pathogens.