Search

Poly(2-alkyl/aryl-2-oxazoline)-polyethylenimine (POZ-PEI) copolymers resulting from the partial hydrolysis of poly(2-alkyl/aryl-2-oxazoline)s (POZs) offer highly tunable properties. The amine groups on the PEI units are suitable for a range of postpolymerization modifications such as ring-opening of epoxides, acylation, and coupling. The reactivity of these amines can be controlled by altering the available structural variables of the copolymer. This makes these copolymers promising candidates as thermal latent curing agents (TLCs) for cross-linking of epoxides. In this paper, a range of POZ homopolymers with different alkyl/aryl pendant groups (ethyl/propyl/pentyl/phenyl) and molar masses (1000, 2000, and 5000 g/mol) were hydrolyzed at different hydrolysis ratios (25%, 50%, and 75%) to synthesize POZ-PEI copolymers. The effects of these parameters on the thermal and structural properties of the copolymers were analyzed using 1 H NMR, FTIR, DSC, and TGA. The POZ-PEI copolymers exhibited lower glass transition temperature ( T g ) and decomposition temperature ( T d ) values in contrast to their precursor homopolymers. TLCs based on the obtained POZ-PEI copolymers were prepared and mixed with bisphenol A diglycidyl ether (DGEBA) to obtain one-component epoxy resins (OCERs). The effect of the mentioned variables on the curing behavior of the prepared OCERs was studied in terms of the enthalpy of curing, left limit temperature, and conversion. POZ-PEI-based TLCs with more hydrophobic side chains, at low hydrolysis ratios and with low molar masses, showed the best latency. PPhOZ-PEI-1 copolymer, with a T g of 52 °C was chosen as the optimal TLC providing mainly chemical latency though steric effects and physical latency by remaining solid at room temperature. Isothermal DSC tests were performed at different temperatures to examine the stability of the resulting OCER. The results showed that this sample was stable at 40 °C for 3 h and partially cured at 60 °C. Also, the viscoelastic properties of the chosen OCER were investigated by rheology studies, namely, amplitude, frequency, and temperature sweeps. The linear viscoelastic region of the PPhOZ-PEI-1-DGEBA OCER extended up to 10% shear strain. The lowest viscosity for this OCER was observed at 104 °C, and a crossover point was seen at 118 °C. Lastly, the thermomechanical properties of the cured sample were analyzed using DMA, which showed a tan δ peak at 87.6 °C., Competing Interests: The authors declare no competing financial interest., (© 2025 The Authors. Published by American Chemical Society.)

One-component epoxy resins (OCERs) with improved stability (shelf life) and controlled curing temperatures were prepared using epoxy resins and polyoxazoline-imidazole (POZ-Im) based thermal latent curing agents (TLCs). POZ homopolymers with molar masses of 1000, 2000, and 5000 g/mol were obtained via cationic ring-opening polymerization (CROP) of 2-ethyl-2-oxazoline, 2-propyl-2-oxazoline, 2-pentyl-2-oxazoline, and 2-phenyl-2-oxazoline. TLCs were prepared by physically entrapping imidazole, the curing agent, in the POZ matrix at the homopolymer/Im (HP/Im) ratios of 1:1 and 5:1 and characterized by FTIR and TGA. TLCs were then mixed with bisphenol A diglycidyl ether (DGEBA) to obtain OCERs with Im concentrations of 1, 3, and 5 wt %. Dynamic DSC tests were performed to determine the effect of the pendant group and molar mass of POZ, the POZ/Im ratio, and Im concentration on the curing behavior of the OCERs, whereas isothermal DSC tests were carried out to examine their thermal stability and optimal curing temperatures. Optical microscopy was performed to study the compatibility of the TLCs with DGEBA. This study showed that the dispersion quality of TLCs is highly associated with the compatibility of POZs and DGEBA, which affected the release of Im, thus left limit temperatures of curing. In addition, higher left limit temperatures were obtained when the POZ/Im ratio increased. Isothermal DSC results conformed to the improved stability and better thermal latency of the samples with a POZ/Im ratio of 5:1. Moreover, the higher left limit temperatures were obtained with the lowest molar mass of POZ due to the better interaction between the -OH end group of POZ and Im. The shelf life of PEOZ 1K-Im 5:1 1% OCER was predicted at -20, 0, and 20 °C, with an estimated 15.3 days at 20 °C using isothermal DSC and rheology at 50, 60, and 70 °C. Overall, this research contributes to the development of OCERs by introducing POZ-Im complexes as novel TLCs. The findings shed light on the importance of compatibility in achieving optimal dispersion and release of Im and the role of the POZ/Im ratio and POZ molar mass in controlling left limit temperatures, ultimately influencing the curing behavior of OCERs., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

One-component epoxy resins (OCERs) are proposed to overcome the energy inefficiency and processing difficulties of conventional two-component epoxy resins by employing latent curing agents, specifically thermal latent curing agents (TLCs). Despite recent progress, the need for TLCs with a simple preparation method for different curing agents, epoxy resins, and process conditions remains. Here, tailorable TLCs were prepared by forming complexes between imidazole (Im) and amphiphilic polyoxazoline copolymers with tunable structures and properties by a solvent evaporation method. The obtained TLCs were manually mixed with DGEBA to prepare OCERs. The miscibility of the complexes with DGEBA was studied, considering the functionalities of copolymers. The curing behaviors of TLCs were compared using dynamic Differential Scanning Calorimetry (DSC) studies considering the side chain and composition of the copolymers, copolymer:Im ratio, and concentration of Im in DGEBA. The curing behavior of the promising OCERs was studied by isothermal DSC studies to investigate their stability at different temperatures and curing rate at elevated temperatures revealing the stability of these OCERs., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Poly(ethylene oxide) (PEO)-based polymer electrolytes are a promising class of materials for use in lithium-ion batteries due to their high ionic conductivity and flexibility. In this study, the effects of polymer architecture including linear, star, and hyperbranched and salt (lithiumbis(trifluoromethanesulfonyl)imide (LiTFSI)) concentration on the glass transition ( T g ), microstructure, phase diagram, free volume, and bulk viscosity, all of which play a significant role in determining the ionic conductivity of the electrolyte, have been systematically studied for PEO-based polymer electrolytes. The branching of PEO widens the liquid phase toward lower salt concentrations, suggesting decreased crystallization and improved ion coordination. At high salt loadings, ion clustering is common for all electrolytes, yet the cluster size and distribution appear to be strongly architecture-dependent. Also, the ionic conductivity is maximized at a salt concentration of [Li/EO ≈ 0.085] for all architectures, and the highly branched polymers displayed as much as three times higher ionic conductivity (with respect to the linear analogue) for the same total molar mass. The architecture-dependent ionic conductivity is attributed to the enhanced free volume measured by positron annihilation lifetime spectroscopy. Interestingly, despite the strong architecture dependence of ionic conductivity, the salt addition in the highly branched architectures results in accelerated yet similar monomeric friction coefficients for these polymers, offering significant potential toward decoupling of conductivity from segmental dynamics of polymer electrolytes, leading to outstanding battery performance., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Wastewater from the textile industry contains high concentrations of pollutants, so the wastewater must be treated before it is discharged. In addition, the reuse of treated wastewater should be considered from an environmental point of view, as large volumes of wastewater are produced. Since textile wastewater mainly contains dyestuffs, it must be treated effectively using environmentally friendly technologies. Membrane processes are widely used in textile wastewater treatment as they have distinct advantages over conventional wastewater treatment methods. This study reports the pilot-scale manufacturing and characterization of three different NF membranes. Three different types of membranes were fabricated. The fabricated membranes were compared through characterization by surface properties, chemical structure and morphology. Membranes were tested for pure water flux. Then the synthetic wastewater (SWW) was tested for flux and rejection. Lastly, the textile wastewater was tested. The textile wastewater flux of pure piperazine (PIP), 60% S-DADPS and 0.04% halloysite nanotubes (HNTs) were 22.42, 79.58 and 40.06 L m -2 h -1 . It has been proven that the 60% s-DADPS membrane provides up to four times improvement in wastewater flux and simultaneously. In addition, NF membranes produced using HNT and sDADPS on a pilot scale have brought innovation to the literature with the good results obtained.

Poly(2-oxazoline)s (POZs) are widely investigated for their applications in various fields due to their unique properties. To exploit and combine different characteristics of the POZ family, 2-oxazoline monomers can be copolymerized to prepare tailor-made copolymers with the desired glass transition temperature ( T g ), melting temperature ( T m ), amphiphilicity, and functionality. Here, we report the synthesis and characterization of 2-oxazoline monomers and a range of POZ copolymers produced, thereof. 2-Propyl-2-oxazoline (PrOZ) and 2-pentyl-2-oxazoline (PeOZ) monomers were synthesized by two different methods starting from nitriles or carboxylic acids. A number of POZ copolymers were synthesized by copolymerization of 2-ethyl-2-oxazoline (EOZ) with either one of PrOZ, PeOZ, or 2-phenyl-2-oxazoline (PhOZ) at three different compositions (25:75, 50:50, and 75:25) and three molecular weights (1000, 2000, and 5000 Da). The successful synthesis of the monomers and copolymers was demonstrated through their structural analysis by 1 H NMR and FTIR. SEC results confirmed the targeted molar masses of the copolymers and living nature of the polymerization by showing low dispersity values. Thermal properties of the copolymers were studied using DSC and TGA. DSC studies revealed the amorph and random state of the copolymers with obtained T g values for the copolymers in the range of -3 to 84 °C depending on their molecular weight and type of the side chain. While the presence of longer aliphatic side chains resulted in lower T g values, the presence of 2-phenyl substituents on the polymer led to higher T g values. The decomposition temperatures determined by TGA were in the range of 328 to 383 °C depending on the molecular weight, composition, and side chain of the copolymers. It was observed that higher molecular weights led to higher T g values and decomposition temperatures. While copolymers with aliphatic side chains exhibited a single-step decomposition profile, the decomposition of copolymers having aromatic side chains occurred in multiple steps. The variations in the molecular weight, composition, and side chains of the copolymers resulted in a library of tailorable amphiphilic copolymers suitable for multiple applications ranging from biomedical applications to composite manufacturing., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

The morphology of nanostructures is a vital parameter to consider in components comprised of materials exhibiting specific functionalities. The number of process steps and the need for high temperatures can often be a limiting factor when targeting a specific morphology. Here, we demonstrate a repeatable synthesis of different morphologies of a highly crystalline monoclinic phase of vanadium dioxide (VO 2 (M)) using a one-step hydrothermal method. By adjusting the synthesis parameters, such as pH, temperature, and reducing agent concentration in the precursor, VO 2 nanostructures with high uniformity and crystallinity are achieved. Some of these morphologies were obtained via the choice of the reducing agent that allowed us to skip the annealing step. Our results indicate that the morphologies of the nanostructures are very sensitive to the hydrazine hydrate (N 2 H 4 .H 2 O) concentration. Another reducing agent, dodecylamine, was used to achieve well-organized and high-quality VO 2 (M) nanotubes. Differential scanning calorimetry (DSC) experiments revealed that all samples display the monoclinic-to-tetragonal structural transition (MTST) regardless of the morphology, albeit at different temperatures that can be interpreted as the variations in overheating and undercooling limits. VO 2 (M) structures with a higher surface to volume ratio exhibit a higher overheating limit than those with low ratios.

Thermoplastic polyurethanes (TPUs) are designed using a large variety of basic building blocks but are only synthesized in a limited number of solvent systems. Understanding the behavior of the copolymers in a selected solvent system is of particular interest to tune the intricate balance of microphase separation/mixing, which is the key mechanism behind the structure formation in TPUs. Here, we present a computationally efficient approach for selecting TPU building blocks and solvents based on their Flory-Huggins interaction parameters for a precise control over the microphase separation/mixing. We first cluster eight soft segments (PEO, PPO, PTMO, PBA, PCL, PDMS, PIB, or PEB) used frequently in TPUs into three categories according to the strength of their interactions with the binary solvent THF/DMF. We then perform a comprehensive set of dissipative particle dynamics simulations of the TPUs in a range of solvent ratios. This enables us to demonstrate the emergence of the unusual channel-like structures in a narrow range of parameters and to determine the critical interactions operative for obtaining either microphase separated or mixed structures. The findings are supported by thermodynamic arguments. The approach developed here is useful for designing novel TPUs with well-defined conformational characteristics, controlled morphologies, and advanced functional properties.

This paper reports the synthesis of nanocomposite agarose hydrogels with improved bioactivity with the incorporation of anisotropic 2D nanosilicates (Laponite) to promote cell binding, growth and proliferation. Rheological measurements showed that the incorporation of nanosilicates slightly increased the gelation temperature (T gel ). The use of higher nanosilicate content at the constant agarose concentration improved the mechanical properties of the gels. Due to the non-swelling nature of agarose, the addition of nanosilicates did not result in any remarkable change in the swelling properties of the agarose gels, while collapsed agarose nanofibers were observed with the incorporation of nanosilicates. EDX analysis confirmed the presence of the embedded nanosilicates in the gel matrix. The existence of physical interactions between nanosilicate and agarose was demonstrated by FTIR over the shifting of SiO stretching band to a lower frequency. The encapsulated NIH/3T3 fibroblast cells showed enhanced proliferation and spreading in the presence of nanosilicates., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Platinum (Pt)-decorated graphene-based carbon composite electrodes with controlled dimensionality were successfully fabricated via core-shell electrospinning/electrospraying techniques. In this process, multilayer graphene sheets were converted into the three different forms, fiber, sphere, and foam, by tailoring the polymer concentration, molecular weight of polymer, and applied voltage. As polymer concentration increased, continuous fibers were produced, whereas decreasing polymer concentration caused the formation of graphene-based foam. In addition, the reduction in polymer molecular weight in electrospun solution led to the creation of three-dimensional (3D) spherical structures. In this work, graphene-based foam was produced for the first time by utilizing core-shell electrospraying technology instead of available chemical vapor deposition techniques. The effect of morphologies and dimensions of carbonized graphene-based carbon electrodes on its electrochemical behavior was investigated by cyclic voltammetry and galvanostatic charge-discharge methods. Among the three different electrodes, Pt-supported 3D graphene-based spheres showed the highest specific capacitance of 118 F/g at a scan rate of 1 mV/s owing to the homogeneous decoration of Pt particles with a small diameter of 4 nm on the surface. After 1000 cycles of charging-discharging, Pt-decorated graphene-based structures showed high cyclic stability and retention of capacitance, indicating their potential as high-performance electrodes for energy storage devices., Competing Interests: The authors declare no competing financial interest.

A single additive, a grafted copolymer, is designed to ensure the stability of suspensions of highly loaded iron oxide nanoparticles (IOPs) and to facilitate three-dimensional (3D) printing of these suspensions in the filament form. This poly (ethylene glycol)-grafted copolymer of N-[3(dimethylamino)propyl]methacrylamide and acrylic acid harnesses both electrostatic and steric repulsion to realize an optimum formulation for 3D printing. When used at 1.15 wt % (by the weight of IOPs), the suspension attains ∼81 wt % solid loading-96% of the theoretical limit as calculated by the Krieger-Dougherty equation. Rectangular, thick-walled toroidal, and thin-walled toroidal magnetic cores and a porous lattice structure are fabricated to demonstrate the utilization of this suspension as an ink for 3D printing. The electrical and magnetic properties of the magnetic cores are characterized through impedance spectroscopy (IS) and vibrating sample magnetometry (VSM), respectively. The IS indicates the possibility of utilizing wire-wound 3D printed cores as the inductive coils. The VSM verifies that the magnetic properties of IOPs before and after the ink formulation are kept almost unchanged because of the low dosage of the additive. This particle-targeted approach for the formulation of 3D printing inks allows embodiment of a fully aqueous system with utmost target material content.

We report molecular dynamics in the rigid amorphous fraction (RAF) of the polymer bound at the interfaces with nanoparticles in polymer nanocomposites and calculate the glass transition temperature, T g , for this bound layer of polymer. We follow the '3-phase-model' for semicrystalline polymers where the polymer matrix consists of the crystalline fraction (CF), the mobile amorphous fraction (MAF) and the RAF. While the amorphous polymer bound by crystallites is completely rigid, neither contributing to the glass transition, nor displaying molecular dynamics, the amorphous polymer bound at the interfaces with filler displays decelerated dynamics, as compared to the bulk polymer. Reports in the literature suggest a discrepancy between T g values obtained by Differential Scanning Calorimetry (DSC) and by Dielectric Relaxation Spectroscopy (DRS). As a plausible explanation we suggest that DRS results in T g values taking into account the bound polymer, whereas DSC does not. For this investigation we use semicrystalline polyurethane-urea/SiO 2 nanocomposites and employ, next to DSC and DRS, SEM, SAXS and WAXS for morphological characterization. It is our intention to use DRS as a tool for investigating the RAF.

Calcium aluminate cement (CAC) suffers from loss of workability in less than an hour (~15 minutes) after first touch of water. Current superplasticizers that are utilized to modify the viscosity of cement admixtures are designed to target ordinary Portland cement (OPC). The high affinity between these superplasticizers and cement particles were found to be detrimental in CAC systems. Utilization of a monomer that, instead, facilitates gradual adsorption of a superplasticizer provides workability retention. For the first time in literature, we report a superplasticizer that caters to the properties of CAC such as high rate of surface development and surface charge. While neat CAC was almost unworkable after 1 hour, with the addition of only 0.4% of the optimized superplasticizer, 90% fluidity retention was achieved., Competing Interests: The authors declare no competing financial interests.

We study the causes of the observed tunable hydrophobicity of poly(styrene-co-perfluoroalkyl ethylacrylate) electrosprayed in THF, DMF, and THF:DMF (1:1) solvents. Under the assumption that equilibrium morphologies in the solvent significantly affect the patterns observed on electrosprayed surfaces, we use atomistic and coarse-grained simulations supported by dynamic light scattering (DLS) experiments to focus on the parameters that affect the resulting morphology of superhydrophobic electrosprayed beads. The differing equilibrium chain size distributions in these solvents examined by DLS are corroborated by chain dimensions obtained via molecular dynamics simulations. Mesoscopic morphologies monitored by dissipative particle dynamics simulations explain experimental observations; in particular, the preference of the polymer for THF over DMF in the binary mixture rationalizes the dual scale roughness driven by stable microphase separation. Drying phenomena that affect resultant dual-scale roughness are described in three stages, each interpreted by concentration dependent diffusion and surface mass transfer coefficients of the solvents. Irrespective of the presence of polar groups in the structure, a conflict between the lower-boiling point solvent adhering to the polymer and the less volatile solvent abundant in the bulk leads to perfectly hydrophobic surfaces.

We demonstrated a facile method to produce perfectly hydrophobic surfaces (advancing and receding angles both 180°) via electrospraying. When a copolymer of styrene and a perfluoroacrylate monomer was electrosprayed in good solvents, surfaces composed of micrometer size beads were formed and fairly low threshold water sliding angles could be achieved. Addition of high boiling point poor solvents to the solutions resulted nanoscale roughness on the beads due to a possible phase separation that occurs in a predominantly poor solvent environment. However, sliding angles were not zero even on the nanoscale roughness dominated topographies achieved by this method. On the other hand, when the electrospraying process parameters were set such that micrometer size hills of nanoscopically rough beads were formed, 0° sliding angles were measured. Videos of droplets recorded and the adhesive forces measured during a contact and release experiment revealed that these dual scale rough surfaces were indeed perfectly hydrophobic. Application of the method with other binary good solvent-poor solvent systems also resulted in perfect hydrophobicity. Overall results showed how the differences in surface topology affected the wettability of surfaces within a very narrow range between perfect and extreme hydrophobicity (advancing and receding angles both close to 180°).

Conventional heterogeneous dispersion polymerizations of unsaturated monomers are performed in either aqueous or organic dispersing media with the addition of interfacially active agents to stabilize the colloidal dispersion that forms. Successful stabilization of the polymer colloid during polymerization results in the formation of high molar mass polymers with high rates of polymerization. An environmentally responsible alternative to aqueous and organic dispersing media for heterogeneous dispersion polymerizations is described in which supercritical carbon dioxide (CO(2)) is used in conjunction with molecularly engineered free radical initiators and amphipathic molecules that are specifically designed to be interfacially active in CO(2). Conventional lipophilic monomers, exemplified by methyl methacrylate, can be quantitatively (>90 percent) polymerized heterogeneously to very high degrees of polymerization (>3000) in supercritical CO(2) in the presence of an added stabilizer to form kinetically stable dispersions that result in micrometer-sized particles with a narrow size distribution.