Search

Nasal systemic drug delivery may provide an easy way to substitute parenteral or oral dosing, however, the excipients have an important role in nasal formulations to increase the permeability of the mucosa and prolong the residence time of the drug. In this work, we aimed to produce meloxicam potassium monohydrate (MXP) containing nasal powders by a nano spray drier with the use of a neutral, an anionic and a cationic β-cyclodextrin as permeation enhancers, and (polyvinyl)alcohol (PVA) as a water soluble polymer. The following examinations were performed in order to study the effect of the applied excipients on the nasal applicability of the formulations: laser scattering, scanning electron microscope measurement, XRPD, DSC and FTIR measurements, adhesivity, in vitro drug release and permeability tests through an artificial membrane and RPMI 2650 cells. Based on our results, spherical particles were prepared with a size of 1.89-2.21 µm in which MXP was present in an amorphous state. Secondary interactions were formed between the excipients and the drug. The charged cyclodextrin-based formulations showed significantly higher adhesive force values regardless of the presence of PVA. The drug release was fast and complete. The passive diffusion of MXP was influenced not only by the charge of the cyclodextrin, but the presence of PVA, too. The permeation of the drug was enhanced in the presence of the anionic cyclodextrin testing it on RPMI 2650 cell model., (Copyright © 2024. Published by Elsevier B.V.)

Background: As a burgeoning cancer treatment modality, photothermal therapy (PTT) has shown robust anti-tumor effects. However, it still faces numerous challenges, such as triggering an inflammatory response and potentially increasing the risk of cancer recurrence. To address these concerns, integration of PTT with anti-inflammatory therapies presents a promising approach to enhance the efficacy of cancer treatment and meanwhile reduce the risk of recurrence., Methods: In this study, Gd 3+ was first chelated with dopamine to create Gd-DA chelates, and then the mesoporous dopamine nanoparticles MX@Arg-Gd-MPDA (MAGM NPs) were synthesized by combining arginine (Arg) and the anti-inflammatory medication meloxicam (MX). The photothermal properties of MAGM NPs were then defined and examined; the in vivo MRI imaging effect, as well as MAGM NPs' anti-cancer and anti-inflammatory efficiency, were tested in a mouse model of breast cancer., Results: The incorporation of Arg doping into MAGM NPs was intended to boost its photothermal conversion efficiency and reactive oxygen species (ROS) scavenging ability. Additionally, synergizing with the anti-inflammatory agent meloxicam (MX) within the nanoparticles aimed to enhance the anti-inflammatory effect following photothermal therapy. Furthermore, gadolinium ions (Gd 3+ ) were chelated into the nanostructure to enable precise T1-T2 dual-mode magnetic resonance imaging (MRI) of the intratumor accumulation profile. This imaging capability was leveraged to guide the implementation of photothermal therapy. Animal experiments demonstrated that MAGM NPs exerted a notable anticancer effect in a 4T1 breast cancer mouse model, under the precise guidance of MRI., Competing Interests: The authors declare that they have no competing interests in this work., (© 2024 Liu et al.)

Background: Oral dose formulations must be soluble in gastrointestinal fluids for systemic absorption. The solubility of meloxicam was determined in 16 different age-specific simulated gastric and intestinal media that mirrored the microenvironments in pediatrics and adults., Methods: The solubility of meloxicam in the 16 different age-specific simulated gastric and intestinal biorelevant media was assessed using the standard US pharmacopeial method. The molecular descriptors of meloxicam were used to assess its intestinal permeability., Results: Meloxicam exhibited low solubility in the age-specific simulated gastric media for fasted and fed states and in pediatrics and adults. Similarly, meloxicam exhibited low solubility in the age-specific simulated media that mirrored neonates fed cow milk-based formula. On the other hand, meloxicam exhibited high solubility in the rest of the age-specific pediatric and adult intestinal media that simulated the fasted and fed states. The pediatric-to-adult solubility ratios were outside the 80-125% range in 7 (58.3%) and was borderline in 1 (8.3%) out of the 12 calculated ratios. These findings indicated that the solubility of meloxicam showed clinically significant differences in 8 (66.7%) of the compared media., Conclusion: Meloxicam exhibited low solubility in the age-specific simulated gastric media and high solubility in the simulated intestinal media for adults and pediatrics. Moreover, the pediatric-to-adult solubility ratios may have clinically significant implications. These differences can be translated into a higher likelihood of failing to demonstrate bioequivalence of different formulations containing meloxicam and variabilities in the performance of these formulations., (© 2024. The Author(s).)

Establishing a physical barrier between the peritoneum and the cecum is an effective method to reduce the risk of postoperative abdominal adhesions. Meloxicam (MX), a nonsteroidal anti-inflammatory drug has also been applied to prevent postoperative adhesions. However, its poor water solubility has led to low bioavailability. Herein, we developed an injectable hydrogel as a barrier and drug carrier for simultaneous postoperative adhesion prevention and treatment. A third-generation polyamide-amine dendrimer (G3) was exploited to dynamically combine with MX to increase the solubility and the bioavailability. The formed G3@MX was further used to crosslink with poly-γ-glutamic acid (γ-PGA) to prepare a hydrogel (GP@MX hydrogel) through the amide bonding. In vitro and in vivo experiments evidenced that the hydrogel had good biosafety and biodegradability. More importantly, the prepared hydrogel could control the release of MX, and the released MX is able to inhibit inflammatory responses and balance the fibrinolytic system in the injury tissues in vivo. The tunable rheological and mechanical properties (compressive moduli: from ∼ 57.31 kPa to ∼ 98.68 kPa;) and high anti-oxidant capacity (total free radical scavenging rate of ∼ 94.56 %), in conjunction with their syringeability and biocompatibility, indicate possible opportunities for the development of advanced hydrogels for postoperative tissue adhesions management., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

The goal of the present study was to prepare meloxicam (MX) entrapped hybrid particles (HPs) to enhance intestinal permeation and anti-inflammatory activity. MX-HPs were prepared by nanoprecipitation method using lipid, chitosan, poloxamer, and TPGS. The formulations (MX-HPs1, MX-HPs2, MX-HPs3) were evaluated for particle size, entrapment efficiency, and drug release to select the optimized composition and further evaluated for permeation study, stability study, morphology, interaction study, and anti-inflammatory activity by carrageenan-induced rat paw edema test. The prepared MX-HPs showed nano sized particles (198.5 ± 3.7 to 223.8 ± 2.1 nm) and PDI (<0.3), zeta potential (16.5 ± 2.7 to 29.1 ± 3.6 mV), and high entrapment efficiency (75.1 ± 4.7 to 88.5 ± 3.9%). The surface morphology was assessed by transmission electron microscopy and showed non-aggregated particles. Infra-red (IR) spectroscopy of pure MX as well as formulation revealed no drug-polymer interaction and X-ray diffraction confirmed the conversion of crystalline MX into amorphous form. The release study data revealed prolonged MX release for 24 h. The selected optimized hybrid particles (MX-HPs2) revealed a 2.3-fold improved enhancement ratio than free MX. The storage stability and gastrointestinal stability data demonstrated a stable formulation in SIF as well as SGF. The anti-inflammatory activity showed better therapeutic action than pure MX dispersion. From the study, it can be concluded that the prepared MX-HPs may be a promising delivery system for MX in treating inflammatory disorders., (© 2024. The Author(s), under exclusive licence to American Association of Pharmaceutical Scientists.)

Background and Objective: Meloxicam (MLX) is prescribed for the management of pain and inflammation allied with osteoarthritis (OA). However, MLX causes intestinal damage in long term administration. Hence, meloxicam loaded emulgel (MLX-emulgel) was optimized, formulated and examined under stringent parameters in monosodium-iodoacetate (MIA) induced knee OA in Wistar rats., Methods and Results: Nanoemulsion of MLX was fabricated by ultrasonication and microfluidization method with a droplet size of 66.81 ± 5.31-nm and zeta potential of -24.6 ± 0.72-mV. Further, MLX nanoemulsion was optimized with centrifugation, heating-cooling cycles and transmittance parameters in addition to scale-up feasibility with microfluidizer. Post optimization, MLX-nanoemulsion was tailored as emulgel with Carbopol Ultrez 10 NF and assessed for pH, rheology, textural properties, assay and stability features. The in-vitro release study revealed the Korsmeyer-Peppas release kinetics and ex-vivo skin permeation was improved by 6.71-folds. The skin distribution of MLX-emulgel evinced the transfollicular mode of permeation. In-vivo study indicated the protective action of MLX-emulegl expressed in terms of inflammatory cyctokines level, X-ray analysis of knee joints of rats, histopathology and OARSI (Osteoarthritis Research Society International) scoring. MLX-emulgel treated group displayed lower (P < 0.001) level of COX-2 intensity as compared to positive control group. However, it was comparable (P > 0.05) to the normal control group, MLX oral dispersion, i.v. solution and etoricoxib gel groups. MLX-emulgel showcased an alternative to the long term usage of analgesics for relieving the symptoms of knee OA., Conclusion: MLX-emulgel may be a potential candidate for translating in to a clinically viable dosage form in the management of knee OA., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Meloxicam (MLX) is considered to have significant analgesic properties. However, the analgesic effects of MLX are compromised by its poor water solubility and thus the low drug loading. The purpose of this study was to develop a high drug-loaded MLX injection by formulating it into nanocrystals (NCs) for the treatment of analgesia. The developed MLXNCs exhibited satisfactory particle sizes and remarkably in vitro dissolution behaviors. In addition, the plasma concentrations of MLXNCs were comparable with the MLX solution (formulated with 1.0% polyoxyethylene castor oil 35) in rats. The acetic acid-induced writhing tests, hot plate tests and hind paw incision experiments demonstrated that the MLXNCs had significant analgesic effects. The findings provide insights into the developed high drug-loaded MLXNCs and provide new therapeutic options for acute and chronic pain management., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Meloxicam (MLX) is a non-steroidal anti-inflammatory drug used to treat rheumatoid arthritis and osteoarthritis. However, its poor water solubility limits the dissolution process and influences absorption. In order to solve this problem and improve its bioavailability, we prepared it in nanocrystals with three different particle sizes to improve solubility and compare the differences between various particle sizes. The nanocrystal particle sizes were studied through dynamic light scattering (DLS) and laser scattering (LS). Transmission electron microscopy (TEM) was used to characterize the morphology of nanocrystals. The sizes of meloxicam-nanocrystals-A (MLX-NCs-A), meloxicam-nanocrystals-B (MLX-NCs-B), and meloxicam-nanocrystals-C (MLX-NCs-C) were 3.262 ± 0.016 μm, 460.2 ± 9.5 nm, and 204.9 ± 2.8 nm, respectively. Molecular simulation was used to explore the distribution and interaction energy of MLX molecules and stabilizer molecules in water. The results of differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) proved that the crystalline state did not change in the preparation process. Transport studies of the Caco-2 cell model indicated that the cumulative degree of transport would increase as the particle size decreased. Additionally, plasma concentration-time curves showed that the AUC 0-∞ of MLX-NCs-C were 3.58- and 2.92-fold greater than those of MLX-NCs-A and MLX-NCs-B, respectively. These results indicate that preparing MLX in nanocrystals can effectively improve the bioavailability, and the particle size of nanocrystals is an important factor in transmission and absorption.

Purpose: This study aimed to formulate an orally disintegrating tablet (ODT) containing both baclofen and meloxicam together for treating osteoarthritis., Methods: Direct compression method was used to prepare ODTs using three types of co-processed excipients (Prosolv ODT G2 ® , F-melt ® , and Pharmaburst ® 500). ODTs were evaluated according to weight variation, thickness, friability, hardness, drug content, wetting time, in-vitro disintegration time, in-vitro dissolution test, and palatability. To enhance the in-vitro dissolution of meloxicam and palatability of ODT, a six sigma methodology was used, and an improvement phase was established where ODTs were prepared using lyophilization and levigation techniques. Finally, a pharmacokinetic study of the improved ODT was accomplished in comparison to the conventional oral tablet., Results: Pharmaburst-based formula (F4) showed the shortest wetting time and, consequently, the shortest disintegration time and the highest percentage of drug dissolved within 3 min compared to the other formulae. All the improved ODTs had a bitterness taste score vary from (0) palatable and (+1) tasteless. The current sigma level was 3.628 σ and 3.33 σ for palatability and solubility of ODT, respectively, which indicated the process was successfully improved compared with the previous sigma level of 2.342 σ of both processes. Pharmacokinetic study of the improved ODTs showed a significant decrease of T max to 120 and 30 min instead of 180 and 120 min for meloxicam and baclofen, respectively., Conclusion: ODTs were successfully improved using the six sigma methodology, the pharmacokinetic parameters of both drugs were enhanced due to rapid absorption through the oral mucosa., Competing Interests: The authors report no conflicts of interest in this work., (© 2021 Abdelmonem et al.)

Recently, the design of new biological metal-ligand complexes has gained a special interest all over the world. In this research, new series of mixed ligand complexes from meloxicam (H 2 mel) and glycine (Gly) were synthesized. Structures of the compounds were investigated employing elemental analyses, infrared, electronic absorption, 1 H NMR, thermal analyses, effective magnetic moment and conductivity. The estimated molar conductivity of the compounds in 1 × 10 -3 M DMF solution indicates the non-electrolyte existence of the examined complexes. Additionally, the effective magnetic moment values refer to the complexes found as octahedral molecular geometry. The data of the infrared spectra showed the chelation of H 2 mel and Gly with metal ions from amide oxygen and nitrogen of the thyizol groups of H 2 mel and through nitrogen of the amide group and oxygen of the carboxylic group for Gly. Thermal analyses indicated that the new complexes have good thermal stability and initially lose hydration water molecules followed by coordinated water molecules, Gly and H 2 mel. The kinetic parameters were calculated graphically using Coats-Redfern and Horowitz-Metzeger methods at n = 1 and n ≠ 1. The density functional theory (DFT) calculations were performed at B3LYP levels. The optimized geometry of the ligand and its complexes were obtained based on the optimized structures. The data indicated that the complexes are soft with η value in the range 0.114 to 0.086, while η = 0.140 for free H 2 mel. The new prepared complexes were investigated as antibacterial and antifungal agents against some phyto- and human pathogens and the minimum inhibitory concentration (MIC) data showed that complex ( A ) has the lowest MIC for Listeria and E. coli (10.8 µg/mL).

Smart phase transformation systems@hard capsule (SPTS@hard capsule) based on lyotropic liquid crystalline (LLC) were developed for oral sustained release in this study. Doxycycline hydrochloride (DOXY) and meloxicam (MLX) were used as hydrophilic and hydrophobic model drug, respectively. Two systems were added with different additives, that is, gelucire 39/01, PEG 1000 and Tween 80 to adjust their melting point and release profiles. The phase transformation of these systems could be triggered by water as well as temperature. They could spontaneously transform into cubic phase or hexagonal phase when coming across with water, to achieve the 24 h sustained release profile. In addition, the obtained systems could switch between semisolid state and liquid state when temperature changed within room temperature and body temperature, which facilitated the phase transformation in gastrointestinal tract and during their encapsulation into hard capsules. LLC-based SPTS@hard capsule revealed potential for the industrialization of its oral administration on account of its drugs accommodation with different solubility, controllable release profile and simple preparation process.

We studied the application of pulsed laser ablation (PLA) for particle size reduction in non-steroidal anti-inflammatory drugs (NSAIDs). Grinding of the poorly water-soluble NSAID crystallites can considerably increase their solubility and bioavailability, thereby the necessary doses can be reduced significantly. We used tablets of ibuprofen, niflumic acid and meloxicam as targets. Nanosecond laser pulses were applied at various wavelengths (KrF excimer laser, λ = 248 nm, FWHM = 18 ns and Nd:YAG laser, λ 1  = 532 nm/λ 2  = 1064 nm, FWHM = 6 ns) and at various fluences. FTIR and Raman spectra showed that the chemical compositions of the drugs had not changed during ablation at 532 nm and 1064 nm laser wavelengths. The size distribution of the ablated products was established using two types of particle size analyzers (SMPS and OPC) having complementary measuring ranges. The mean size of the drug crystallites decreased from the initial 30-80 µm to the submicron to nanometer range. For a better understanding of the ablation mechanism we made several investigations (SEM, Ellipsometry, Fast photography) and some model calculations. We have established that PLA offers a chemical-free and simple method for the size reduction of poorly water-soluble drugs and a possible new way for pharmaceutical drug preformulation for nasal administration.

Objective: Bioavailability of Meloxicam (MLX) from solid dispersions (SDs), against innovator product Mobic ® in humans was conducted. Furthermore, to establish a good in vitro - in vivo correlation (IVIVC); dissolution studies were carried-out in different media., Methods: MLX/SDs was prepared using Soluplus/Poloxamer via hot-melt-extrusion (EXT-SD) and fusion melt (FUS-SD) techniques. A single oral dose (15 mg), three periods, crossover study of MLX/SDs and Mobic ® in four healthy humans under fed conditions was carried-out. In vitro dissolution was studied in pH 1.2, distilled water (pH 6.4), and biorelevant simulated gastric media in pre- and post-prandial states. Level A IVIVC was carried-out by comparing time-scaled fraction dissolved versus fraction absorbed and calculated using the Wagner-Nelson method. Multiple level C models were developed for C max and AUC 0-96 versus % dissolved at different time-points. Internal predictability was evaluated for both IVIVC models., Results: MLX rate of absorption ( T max ) from EXT-SD, FUS-SD, and Mobic ® was 1.5, 3.0, and 4.0 h, respectively. Moreover, 1.45- and 1.40-folds increase in AUC 0-∞ and C max , was obtained for EXT-SD versus Mobic ® , respectively, while FUS-SD gave the lowest extent of drug absorption. EXT-SD provided highest dissolution profiles in all studied media. IVIVC models showed linear-regression ( R 2 ≥0.90) and prediction errors (≤10%) in water and post-prandial simulated gastric media., Conclusion: Hot-melt-extrusion technology promises an ideal alternative for enhancing MLX extent of absorption compared to Mobic ® with T max value almost equal to the reported intramuscular injection. Predictive IVIVC was established for in vitro dissolution profile and in vivo performance.

Meloxicam (MLX) is a non-steroidal anti-inflammatory which is practically insoluble in water, requiring high concentrations to reach therapeutic levels and causing frequently gastrointestinal effects. In this way, the aim of this study was to synthesize two eutectic mixtures of MLX with mandelic acid (MND) and saccharin (SAC) by liquid-assisted grinding resulting in a multicomponent material with enhanced solubility. Mixtures were studied in different stoichiometric and eutectic point was found for each eutectic by Binary phase diagram and Tamman's triangle, with 0.33 molar fraction of MLX for SAC and MND. Eutectics were characterized by thermoanalytical techniques (TG-DSC, EGA, DSC, and DSC microscopy), infrared spectroscopy, and X-ray powder diffraction. Thermal behavior was studied and videos of the materials being heated were available. A polymorphic transition was discovered and studied for MLX-MND eutectic. Each new system was evaluated by solubility, dissolution, and hygroscopicity tests. Eutectics showed an increase in solubility of 1.7× (MLX-MND1), 3.1× (MLX-MND2), and 1.3× (MLX-SAC) with slower dissolution profile when compared with MLX. All new solid forms showed high hygroscopicity at 98% relative humidity with 27.9 and 58.9% increase in mass at day four for MLX-SAC and MLX-MND, deliquescence occurs at day 6. The experiments and analysis in this study help to understand the behavior of eutectics and evaluate them as an approach to modify properties in drugs.

One of the conventional methods of alleviating the problem of poor drug solubility is the particle size reduction. The efficiency of this approach depends on successful formulation suppressing the drug agglomeration. The aim of this study was to circumvent the dissolution problems of model hydrophobic meloxicam drug (MLX) by using liquid media of different wetting capacity to comminute and formulate a rapidly dissolving carrier system without the use of surfactants. Micro-suspensions of MLX were prepared by ball milling, using water or n-Heptane as a liquid medium. The suspensions were used as granulation liquids to formulate granulate from microcrystalline cellulose and lactose mixture. The release kinetics from prepared granulates were studied using the USP-4 dissolution apparatus. Micro-suspensions prepared via wet milling in non-water liquid media exhibited a massive improvement of release rate compared with source meloxicam and they outperformed their water-milled counterparts. The release rates from those formulations, despite not comprising any surfactant, were comparable to those obtained by different authors using surfactant stabilized nanosuspension formulations. Thus, they can present an interesting formulation alternative for hydrophobic drugs that are dissolution limited.

The Process Analytical Technology (PAT) and the Quality-by-Design (QbD) approaches can efficiently facilitate the shift to the desired continuous manufacturing and real time release testing (RTRT). By this, it is vital to develop new, in-line analytical methods which fulfil the pharmaceutical requirements. The fast-developing digital imaging-based machine vision systems can provide revolutionary solutions not just in the automotive industry but in the pharmaceutical technology, as well. This study aimed to explore the capabilities of UV/VIS-based machine vision in tablet inspection as a PAT tool for the determination of compression force and crushing strength, drug content and drug distribution in tablets using meloxicam a yellow model drug. In the case of determining the compression force and crushing strength, the application of multivariate wavelet texture analysis (MWTA) based models provided relatively low prediction errors. To predict the drug content of meloxicam tablets CIELAB or RGB colorspace based algorithms were successfully developed and validated. UV/VIS imaging was also used to map the particle size distribution and spatial distribution of meloxicam, the results were compared to chemical maps obtained by Raman microscopy. Digital imaging combined with multivariate data analysis might be a valuable, high throughput, in-line PAT tool for automated inspection of pharmaceutical tablets., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Epidural adhesion between the spinal dura and the surrounding fibrous tissue often occurs post-laminectomy, resulting in clinical symptoms such as nerve compression and severe pain. In this study, we report a drug-loaded double-layered electrospun nanofiber membrane to prevent the occurrence of epidural adhesion. The nanofibers in both layers are made of a mixture of polycaprolactone (PCL) and chitosan (CS) but at different weight ratios. The bottom layer contacting to the spinal dura is loaded with meloxicam (MX) to prevent inflammation. The top layer that contacts to the fibrous tissue is doped with mitomycin-C (MMC) to inhibit the synthesis of DNA and collagen. The two types of drugs are released from the double-layered membrane within about 12 days. Meanwhile, the membrane can inhibit fibroblasts proliferation in vitro while show no cytotoxicity. In a rabbit laminectomy model, the double-layered membrane can effectively prevent the epidural adhesion formation based on the adhesion scores, histological and biochemical evaluations. The combination release of MX and MMC can signally reduce the inflammation reaction and collagen I/III expression relative to the case with the membranes loaded with only either one type of the drugs. This approach offers new progresses in constructing dual drug delivery system and provides innovative barrier strategy in inhibiting epidural adhesion post-laminectomy., (© 2019 Wiley Periodicals, Inc.)

In order to investigate the correlation among energy input-related, drug-related, and stabilizer-related aspects for both top-down and bottom-up nanocrystal production, meloxicam nanosuspensions (NS) were produced by using three different methods (low-energy wet milling, high-pressure homogenization, and precipitation) and each method was optimized by using design of experiment (DoE). Box-Behnken design of 3 factors and 3 levels was applied for the optimization of each method. All the three models were found to be significant and the optimized process parameters were used for production of NS, respectively. Interestingly, by comparison of the top-down and bottom-up approaches, the influence of energy input (homogenization pressure or milling speed) from the instruments seemed not significant for top-down compared with bottom-up for this drug. Different mechanisms of homogenization (relatively high energy zone) and milling (relatively low energy zone) led to obtained various significant correlations for each method. Capsules containing nanocrystals were successfully produced by using a novel method applying NS (after wet bead milling and homogenization processes) as wetting agent for direct capsuling and showed superiority regarding as dissolution rate compared with the traditional two-step method (freeze-dried powder used for capsuling as the first step). Different NS preparation methodologies proved to have a direct influence on the following capsuling process and consequently, in the dissolution rate. This study also proved that residual DMSO in nanosuspension after precipitation process could affect the freeze-drying process, which might further alter the redispersion and influence the downstream processes.

Fast dissolving orodispersible film (ODF) was prepared for concurrent administration of biopharmaceutical classification system (BCS) class II drugs, i.e., meloxicam (MX) and tizanidine (TZ), using natural (xanthan gum), semisynthetic (hydroxypropyl methylcellulose and hydroxyethyl cellulose) and synthetic (polyvinyl alcohol) polymers. Compatibility of the ingredients of ODFs was ascertained through Fourier transform infra-red spectroscopy and differential scanning calorimetry. ODFs were characterized through disintegration time, pH of the surface of film, tensile strength, folding endurance, % elongation and content uniformity (MX and TZ) which were found in the range between 17±1.3-56±3.1 s, 5.11±0.07-6.28±0.05, 14.721±1.2-33.084±3.1 N/m2, > 100, 3.33±0.53-10.04±0.77 % and 98.01-99.34 % (MX) and 97.48-99.03 % (TZ), respectively. The values of moisture uptake, moisture loss and loss on drying of all formulations were in the range from 1.06±0.09-7.51±0.93 %, 0.06±0.01-2.3±0.08 % and 0.008±0.002-0.03±0.03 %, respectively. In vitro drug release study in simulated saliva fluid of pH 7.4 has shown that > 90 % MX and TZ was released within 5 min. Visual inspection, scanning electron microscope and X-ray diffraction analysis of all ODFs expressed their smooth surfaces. ODF prepared from xanthan gum (F5) exhibited better physicochemical and mechanical properties as compared to other formulations.

Background Solid dispersion (SD) represents a good method for enhancing the solubility of poorly water-soluble drugs. Meloxicam (MLX), a nonsteroidal anti-inflammatory drug has poor solubility in water. Hydroxypropyl methylcellulose (HPMC) 2910 3 cps, a hydrophilic carrier and nicotinamide (NC), a hydrotropic agent can be used as matrix of SD. The aim of this study is to investigate the effect of HPMC 2910 3 cps and NC as SD matrix on the solubility and dissolution rate of MLX. Methods The SD of MLX was prepared by solvent evaporation method using methanol as solvent. The SD formulations composed of HPMC and NC in different ratios (1:1:1, 1:1:2, 1:2:1, 1:2:2). The physical state of MLX SD were characterized by Differential Thermal Analyzer (DTA), Fourier Transform Infrared Spectroscopy, powder X-ray diffractometer (PXRD), Scanning Electron Microscopy (SEM). The solubility and dissolution of the MLX SD were also evaluated. Results The results of differential thermal analysis (DTA) showed that the melting point of MLX SD was lower than MLX further the X-ray diffractogram showed a decrease of the crystallinity of MLX in SD. Those indicated that MLX was dispersed molecularly in SD. The SD showed a widening transmission peak at 3000-3500 cm-1 which resembled the peak of pure MLX transmission. It indicated that intermolecular hydrogen bonds were formed between MLX, HPMC, and NC. The solubility and the dissolution efficiency (ED60) of SD with MLX-HPMC 2910 3 cps-NC = 1:2:1 increased 3.59 times and 1.50 times higher then MLX substance. Conclusions MLX-HPMC-NC SD system increased the solubility and dissolution of MLX. The SD with MLX-HPMC 2910 3 cps-NC ratio of 1:2:1 had the highest solubility and ED60 compared to the other SD formulas.

Background Meloxicam (MLX) is a potent non-steroidal anti-inflammatory drug with poor solubility. Solid dispersion (SD) is an effective formulation strategy to improve the dissolution rate of poorly water-soluble compounds. Hydroxy propyl methyl cellulose (HPMC) as an inert polymer carrier and nicotinic acid (NA) as disturbance can be used as a matrix of SD. The aim of this study was to determine the effect of MLX-HPMC-NA SD on the solubility and dissolution of MLX. Methods SD was prepared by the solvent evaporation technique with methanol being used as a solvent. Methanol was evaporated at room temperature. SD of MLX was prepared involving various matrix compositions at MLX:HPMC:NA ratios of 1:1:1 (SD1), 1:1:2 (SD2), 1:2:1 (SD3), and 1:2:2 (SD4). Results The solubility profile of MLX in SD3 (64.34 ppm) showed a higher improvement than the physical mixture (15.99 ppm) and pure MLX (6.89 ppm). This increase might be due to the formation of molecular dispersion of MLX in the polymer as hydrophilic matrix and NA have both donor-acceptor sites for hydrogen bonding interactions. The dissolution profile of SD3 also showed the highest improvement. The melting endotherm of SD3 was detected at 219.5 °C, in which case it originated from NA rather than from MLX, showing that MLX was molecularly dispersed and amorphous. Conclusions MLX solubility and dissolution profile could be improved by the SD technique with a matrix of HPMC and NA. The best result was given by SD3 with an MLX:HPMC:NA ratio of 1:2:1. Based on the characterization study, it is predicted that hydrophilic polymer and hydrogen bonding interactions play important roles in MLX solubility or dissolution rate improvement.

Purpose: The aim of this work was to study the influence of solidification of meloxicam (Mel) containing nanosuspension (nanoMel) on the physical stability and drug bioavailability of the products. The nanoMel sample had poly(vinyl alcohol) (PVA) as a protective polymer, but no surfactant as a further stabilizing agent because the final aim was to produce surfactant-free solid phase products as well., Methods: The solidified samples produced by fluidization and lyophilization (fluidMel, lyoMel) were examined for particle size, crystallinity, and in vitro release of Mel compared to similar parameters of nanoMel. The products were subjected to an animal experiment using per oral administration to verify their bioavailability., Results: Mel containing (1%) nanoMel sample was produced by wet milling process using an optimized amount of PVA (0.5%) which resulted in 130 nm as mean particle size and a significant reduction in the degree of crystallinity (13.43%) of Mel. The fluidization technique using microcrystalline cellulose (MCC) as carrier resulted in a quick conversion and no significant change in the critical product parameters. The process of lyophilization required a longer operation time, which resulted in the amorphization of the crystalline carrier (trehalose) and the recrystallization of Mel increased its particle size and crystallinity. The fluidMel and lyoMel samples had nearly five-fold higher relative bioavailability than nanoMel application by oral administration. The correlation between in vitro and in vivo studies showed that the fixed Mel nanoparticles on the surface of solid carriers (MCC, trehalose) in both the artificial gastric juice and the stomach of the animals rapidly reached saturation concentration leading to faster dissolution and rapid absorption., Conclusion: The solidification of the nanosuspension not only increased the stability of the Mel nanoparticles but also allowed the preparation of surfactant-free compositions with excellent bioavailability which may be an important consideration for certain groups of patients to achieve rapid analgesia., Competing Interests: The authors report no financial interest and no conflicts of interest in this work., (© 2019 Bartos et al.)

The objectives of this work were to develop meloxicam based amorphous solid dispersion through electrospinning technique and evaluate the effect of the polymeric matrix on the physicochemical properties of the fibers and the downstream processing ability to orodispersible dosage forms. Drug - polymer interactions formed between Eudragit E and meloxicam, confirmed through Raman and 1HNMR spectra, enabled the development of fibers from ethanol, thus allowing an increased production rate compared to PVPk30 where a DMF:THF solvent system was suitable. Microflux dissolution-permeation studies showed a significantly higher diffusion from amorphous solid dispersions compared to crystalline meloxicam. The flux through the membrane was influenced by the polymers only under basic conditions, where the precipitation of Eudragit E limited the complete resolubilization of the active ingredient. This phenomenon was not observed during large volume conventional dissolution testing. The effect of formulation on long term stability could not be highlighted as all products were stable up to 15 months, stored in closed holders at 25 °C ± 2 °C and 50%RH ± 10%. The increased surface area of fibers enabled tablet preparation with low pressures due to favorable bonding between particles during compression. PVPk30 formulation presented higher tabletability and compactability, as higher tensile strength compacts could be prepared. Eudragit E formulation had lower detachment and ejection stress, suggesting a lower sticking tendency during tableting. The presence of HPßCD in PVPk30 formulation offered improved morphological features of the fibers, however no significant effect was observed on dissolution, permeation or mechanical properties. Downstream processing was guided by polymer mechanical properties and solubility, thus PVPk30 fibers could be delivered in the form of orodispersible webs and conventional tablets, whereas Eudragit E fibers as orodispersible tablets., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Meloxicam (MX), a nonsteroidal anti-inflammatory drug, widely used to treat arthritis, has a very bitter taste. Chemical modification of the bitter functionality was achieved by synthesis of a prodrug, meloxicam pivalate (MXP). Taste improvement was evaluated using single bottle-test rat model. It was found that palatability of MXP solution improved significantly as compared to MX.

(1) Background: In this work, we investigated the application of a natural superdisintegrant, psyllium ( Plantago ovata Forsk) husk powder, for the manufacture of orodispersible meloxicam tablets. Meloxicam was chosen as a model compound for the study. (2) Methods: The tablets were prepared using different concentrations of psyllium husk by direct compression. Bulk density, tapped density, hardness, friability, in vitro disintegration, and dissolution time tests were used to assess the quality of the formulations. (3) Results: Psyllium husk powder significantly increased the dissolution rate of meloxicam. The formulation containing 16 mg of psyllium husk powder showed the lowest wetting time, the highest water absorption ratio, and the lowest disintegration time compared to the control and to the other formulations. These effects may be attributed to the rapid uptake of water due to the vigorous swelling ability of psyllium husk powder. (4) Conclusions: The powder could be recommended as an effective natural superdisintegrant for orodispersible formulations.

Meloxicam is a common analgesic for rodents. Because meloxicam is only formulated commercially for companion animals, it requires dilution to achieve doses appropriate for small, laboratory species. Compounded multidose vial (cMDV) are often created to dilute and store a diluted drug. However, chronic cMDV use runs the risk of contamination and becoming a potential source of nosocomial infection. In this study, we created 15 cMDV by diluting meloxicam with sterile water (dilution, 1:10). cMDV were punctured once daily for 30 d. To determine the sterility of the diluted meloxicam, we assessed 8 cMDV for bacterial growth on days 0, 10, 20, 30, and 365 and tested them for endotoxin on days 0, 30, and 365. In addition, the stability of the remaining 7 cMDV was assessed on days 0, 10, 20, 30, and 365, by using liquid chromatography-diode assays. No bacterial growth or endotoxin was detected at any time point, and the drug concentrations remained stable over 365 d. Given the results this study, we believe that cMDV of diluted meloxicam can remain sterile and stable for 365 d.

The purpose of the present investigation was to analyze devitrification of amorphous drugs such as lornoxicam, meloxicam, and felodipine in the presence of sericin. The binary solid dispersions comprising varying mass ratios of drug and sericin were subject to amorphization by spray drying, solvent evaporation, ball milling, and physical mixing. Further, obtained solid dispersions (SDs) were characterized by HPLC, ATR-FTIR, H 1 NMR, molecular docking, accelerated stability study at 40°C and 75 ± 2% RH (XRD and DSC), and in vitro dissolution studies. The HPLC analysis indicated no decomposition of the drugs during the spray drying process. From ATR-FTIR, NMR, and molecular docking study, it was revealed that H-bonding played a vital role in amorphous drug stabilization. An excellent devitrification inhibition was observed in case of lornoxicam (SDLS3) and meloxicam (SDMS3) SDs prepared by spray drying. On the other hand, spray-dried SD of felodipine (SDFS3) showed traces of microcrystals. The percent crystallinity of SDLS3, SDMS3, and SDFS3 was found to be 7.4%, 8.23%, and 18.31% respectively indicating adequate amorphization. The dissolution performance of SDLS, SDMS, and SDFS after 3 months showed > 85% than SDs prepared by other methods. Thus, sericin significantly inhibited crystallization and was responsible for amorphous state stabilization of pharmaceuticals.

Current medical healthcare has no sufficient innovative drug delivery formulations for treating patients with alveolar osteitis. This study presents a portion of research conducted to design, fabricate, and characterize systems for the treatment of alveolar osteitis. The results demonstrate that intra-alveolar formulations can be designed to function as drug carriers, facilitate wound dressing, and promote tissue regeneration. Our aim was to design cone-shaped implants made of microcrystalline chitosan filled with sodium meloxicam, i.e., a nonsteroidal anti-inflammatory agent. SEM analysis revealed the porous structure and monophasic characteristic of the formulation. Moreover, textural analysis demonstrated the effect of different factors (shape, hydration, addition of an active substance) on the hardness, springiness and cohesiveness of the studied systems. The active substance was released in a two-phase process. In vitro biocompatibility tests performed according to ISO 10993-5 confirmed the lack of cytotoxicity of the tested formulations. The designed formulations did not stimulate human THP1-XBlue™ monocytes to activate the transcription nuclear factor NF-κB, which ensures that the performed systems do not induce local inflammation. These initial results indicate that the innovative sodium meloxicam release system can improve safety and efficacy in clinical settings., (Copyright © 2019. Published by Elsevier B.V.)

The development of a chemometric method for monitoring the pharmaceutical dissolution, under green analytical chemistry principles, was reported. Meloxicam (MEL) and pridinol (PRI) were employed as a combination model. Multivariate curve resolution with alternating least squares (MCR-ALS) was proposed to resolve UV spectra of the analytes during pharmaceutical dissolution. Empowering UV-vis spectrophotometry, which is considered an economical, ecological and fast technique, but poor in terms of selectivity. The developed method was validated in accordance to ICH guidelines, fulfilling acceptance criteria for linearity (r > 0.99 in the ranges 3.5-19.6 mg L -1 and 0.81-5.41 mg L -1 for MEL and PRI, respectively), accuracy (96.3% and 100.6% recoveries for MEL and PRI respectively), and precision (RSD < 10%) were evaluated using an independent validation set. Using a commercial sample, the method's accuracy was evaluated against HPLC analysis. Dissolution profiles were obtained using both methods. A point-to-point comparison with Moore and Flanner's factors (f 1 and f 2 ) were calculated. Specificity was evaluated by spectral correlation (R 2 >0.950). Additionally, the developed method works on-line and forgoes organic solvents and dilutions, lending itself to automation., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Fast dissolution of nonsteroidal anti-inflammatory drugs (NSAIDs) is a prerequisite from patient perspective. However, most NSAIDs are slowly dissolving acidic compounds. Caffeine, a commonly used analgesic adjuvant with NSAIDs showed high potential as eutectic co-former for acidic compounds. The study investigated eutectic forming potential of caffeine with meloxicam, aceclofenac and flurbiprofen. Each drug was co-ground with caffeine in various ratios and the products were characterized by thermal analysis to determine the optimum eutectic composition from phase diagram and Tamman's triangle. The optimum systems were subjected to X-ray powder diffraction (XRPD), Fourier-transform infrared (FTIR) and dissolution studies. Co-ground systems at dose ratio were also assessed for drug dissolution and anti-inflammatory effect using carrageenan induced rat paw edema method. Eutexia was confirmed by thermal analysis with the optimum composition being 1:1, 1:1 and 1:2 (NSAID: caffeine) for aceclofenac, flurbiprofen and meloxicam, respectively. Eutexia did not alter FTIR spectra with minor changes being recorded in XRPD patterns. The eutectic systems underwent fast liberation of drugs with fast dissolution being retained even at dose ratios. Dissolution enhancement was associated with enhanced anti-inflammatory response. The study introduced caffeine as eutectic forming analgesic for fixed dose combination with NSAIDs to enhance drug dissolution and anti-inflammatory effect., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Meloxicam is an anti-inflammatory drug that could be interesting to deliver locally to the lungs to treat inflammation occurring in cystic fibrosis or chronic obstructive pulmonary disease (COPD). Spray drying conditions were optimized to prepare inhalable dry powders, from meloxicam aqueous solution with pH adjustment. A comparison study between non-porous and large porous particles (LPPs) was carried out to demonstrate the relevance of the aimed large size (>5 µm) and low density (<0.2 mg/cm 3 ) formulations. With the appropriate amount of porogen agent, ammonium bicarbonate, LPPs exhibited the same aerodynamic diameter and a higher deposited fraction than smaller but dense particles. The aerodynamic evaluation of LPPs showed that the fine particle fraction (FPF) reached up to 65.8%, while the emitted fraction (EF) reached 85.4%, both higher than for the non-porous particles. Stability tests demonstrated that, after 10 weeks of storage, no significant difference could be detected in the aerodynamic behaviour of the formulations. To the best of our knowledge this is the first time large porous particles, with enhanced aerodynamic properties, from an aqueous solution of meloxicam are reported., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The mandatory strategy of using internal standard in HPLC is still controversial. Despite that the introduction of internal standard methodology in the early stage of development of HPLC technology was used to improve method accuracy and precision, there are still practical situations in which a simple external standard quantification is adequate. The aim of the study is to compare the determination of meloxicam (MXC) in human plasma by HPLC with or without using an internal standard according to some key points related to the reason of introducing the internal standardization such as the reducing of sample preparation errors or variability for low injection volumes. The HPLC analysis was performed on reversed phase with UV detection after protein precipitation. Piroxicam (PXC) was used as an internal standard. The two methods are compared in terms of accuracy and precision over the same concentration range. The stability of the analyte has been proved. According to the results, the quantitative determination of MXC in human plasma after simple protein precipitation by using PXC as an internal standard does not bring any significant improvement of accuracy and precision of the experimental measurements.

Despite its large effectiveness, the long-term oral administration of high doses of meloxicam (MLX) may lead to gastrointestinal events such as abdominal pain, diarrhea, dyspepsia, ulceration, hemorrhage, and gastrointestinal perforation. Moreover, the pH-dependent solubility of MLX makes the development of new oral formulations even more challenging. As an alternative to overcome these limitations, the transdermal delivery of this drug has been purposed. Although various physical and chemical approaches to enhance the absorption of MLX may be found in literature, the use of cocrystallization has not been reported so far. Cutaneous permeation of MLX and 1:1 meloxicam-salicylic acid cocrystal (MLX-SLC) were evaluated using Franz diffusion cells. Cocrystal was suspended in an aqueous solution and in a gel to evaluate the vehicle effect on permeation parameters. In aqueous medium, the cocrystallization showed to enhance the drug permeation coefficient from 1.38 to 2.15 × 10 -3  cm/h. MLX-SLC generated supersaturation with respect to the drug during dissolution studies simulating the conditions in the Franz cell donor chamber. This greater amount of free drug in the solution could contribute to explain the higher transdermal absorption and shorter lag time of this system. In addition, the acidic coformer ionization led to a pH reduction from 7.4 to 5.8, which, in turn, provided an increase in the unionized species of the drug, enhancing its permeation rate. The gel containing cocrystals reduced MLX permeation rate significantly (P = 0.42 × 10 -3  cm/h), which was attributed to its higher viscosity., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Chemical degradation of drug substances remains a major drawback of extrusion. Larger-scale extrusion equipment has advantages over smaller equipment due to deeper flight elements and added flexibility in terms of screw design, unit operations, and residence time. In a previous study, we extruded a meloxicam-copovidone amorphous solid dispersion (ASD) on a Nano-16 extruder and achieved 96.7% purity. The purpose of this study is to introduce a strategy for scaling the process to an extruder with dissimilar geometry and to investigate the impact on the purity of the ASD. The formulation previously optimized on the Nano-16, 10:90 meloxicam and copovidone, was used for scale-up. Our approach to scale-up to the ZSE-18, utilized specific mechanical energy input and degree of fill from the Nano-16. Vacuum was added to prevent hydrolysis of meloxicam. Downstream feeding and micronization of meloxicam were introduced to reduce the residence time. In-line monitoring of the solubilization of meloxicam was monitored with a UV probe positioned at the die. We were able to achieve the same purity of meloxicam with the Micro-18 as we achieved with Nano-16. When process conditions alone were not sufficient, meglumine was added to further stabilize meloxicam. In addition to the chemical stability advantage that meglumine provided, we also observed solubility enhancement which allowed for an increase in drug loading to 20% while maintaining 100% purity.

In this research work biowaiver studies of newly developed and optimized Meloxicam 7.5mg and 15mg water dispersible formulations were carried out at different dissolution media i.e. 0.1N HCl, phosphate buffer pH 4.5, pH 6.8, and pH 7.5 at 50 rpm. For this purpose reference (MA 9 and MB 9 ) and tests (MA 2 , MA 4 , MA 6 , MA 7 and MA 8 (15 mg) and MB2, MB4, MB6, MB7and MB8 (7.5 mg) formulations were compared. In vitro patterns were analyzed by using model-independent and model-dependent methods. Results indicated that all formulation at pH 0.1N HCl and phosphate buffer pH 4.5 followed Weibull model, while at pH 6.8 and pH 7.5 all formulations followed Hixson-Crowell model. Similarly results of model independent methods demonstrated that all the reference formulations were found to be similar with the tests formulations. Results indicated that Biowaiver could be granted to all the optimized water dispersible meloxicam formulations of both batches, so waiver for bioequivalence study can be allowed.

A robust extraction method against the variations of sample ionic strength viz. ionic liquid-based ultrasound-assisted in situ solvent formation microextraction (IL-UA-ISFME) was coupled for the first time with high-performance liquid chromatography-ultraviolet detection (HPLC-UV), and successfully used as a more sustainable approach for the determination of meloxicam (MEL) in human plasma. Herein, a hydrophobic IL (1-butyl-3-methylimidazolium hexafluorophosphate) was formed by adding a hydrophilic IL (1-butyl-3-methylimidazolium tetrafluoroborate) to aqueous sample solution containing an ion-exchange reagent (sodium hexafluorophosphate). The target analyte was transferred into the IL medium while the extraction solvent was completely dispersed into the sample using ultrasonic irradiation and then, the settled enriched phase was injected to HPLC. Firstly, main factors affecting the microextraction performance were evaluated and optimized. The linearity was in the range of 5-1,500 ng mL-1 with regression coefficient corresponding to 0.997. Limits of detection (LOD; signal-to-noise ratio (S/N) = 3) and quantification (LOQ, S/N = 10) were 1 and 5 ng mL-1, respectively. An acceptable recovery range of 82.1-93.6% and satisfactory intra-assay (3.6-4.8%, n = 6) and inter-assay (3.3-5.1%, n = 9) precision as well as remarkable sample clean up exhibited good efficiency of the method. The freeze-thaw stability study was performed for samples and standard solutions. To study the applicability of the proposed method, it was employed for the determination of MEL in human plasma after oral administration of the drug and some pharmacokinetic data were achieved. The technique proved to be accurate and reliable for the screening intentions., (© The Author(s) 2018. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

As the pipeline for poorly soluble compounds continues to grow, drug degradation during melt extrusion must be addressed. We present a novel method for stabilizing a thermally labile drug substance while preserving its physical stability and even improving its dissolution performance. In a previous study, we found that incorporating meglumine during extrusion of meloxicam results in chemical stabilization that cannot be achieved using process optimization alone. The purpose of this study is to understand the mechanism behind this stabilization and its impact on the performance of a meloxicam-Kollidon VA64 amorphous solid dispersion. The meloxicam concentration was maintained at 10% (w/w) for blends with and without meglumine. The optimal meglumine blend contained an equimolar amount of meloxicam to meglumine with the remainder consisting of Kollidon VA64. Both formulations were processed with optimized extrusion conditions and analyzed by HPLC for purity. Meglumine at a 1:1 molar ratio with meloxicam results in 100% purity of meloxicam after melt extrusion. Solid-state NMR revealed a proton transfer between the meloxicam and meglumine indicating an in situ salt formation. During non-sink dissolution, the meglumine ASD enables meloxicam to maintain supersaturatation (≅50 times more than meloxicam free acid) for >7.25 h. The ASD without meglumine began precipitating 2.25 h following the pH shift. The ASDs were placed at 40 °C/75% RH for 6 months, and their stability was assessed. No significant chemical degradation, recrystallization, or significant moisture uptake was observed after six months' storage at 40 °C/75% RH.

Meloxicam is a poor water soluble drug mostly prescribed in various rheumatic diseases. The present research study was design to formulate and increase the solubility of meloxicam in the tablet dosage form. A 3 2 full factorial design was employed to optimize meloxicam formulations. Polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (PVCL-PVA-PEG graft copolymer) and Povidone were taken as independent variables while cumulative drug release at 90 minutes was selected as dependent variable. All trial formulations complied with official standards. Multiple regression by Microsoft Excel on cumulative drug release of the selected formulations (F1, F2, F6- F9) showed the positive effect of PVCL-PVA-PEG graft copolymer (α = 0.05) and a negative effect of Povidone (α = 0.05). Formulation six (F6) (PVCL-PVA-PEG graft copolymer 3 mg and Povidone 22.5 mg / tablet) was considered as the optimal formulation based on its cumulative drug release. Dissolution kinetics by model dependent analysis predicted Weibull (R 2 =0.99) as the best fit model in describing meloxicam dissolution kinetics. The role of PVCL-PVA-PEG graft copolymer should be explored with other solubilizers in future studies.

Background: Chemoprevention is a strategy which uses drugs which are traditionally not used as anti-cancer drugs; however, they prevent the carcinogenesis. Meloxicam (MLX) is traditionally used as a non-steroidal anti-inflammatory drug (NSAID), but it has been proven to have activity against colorectal cancer. Subsequently MLX seems to be a likely candidate to be utilized in the chemopreventive therapy of colorectal cancer. However, MLX poses shortcomings with respect to its dose required to elicit cytotoxicity. To improve the formulation, we used Quality by design (QbD) for optimization. QbD is a method that employs quality-improving scientific methods that build quality into the formulation by isolating the factors which affect the critical quality attributes of the formulation. The aim of the present study was to utilize the principles of QbD to formulate MLX into a formulation so as to exploit its potential to the fullest., Methods: Conventional (CLM) and PEGylated liposomes (MPL) of MLX was prepared using hydrogenated soya phosphatidylcholine (HSPC), distearyl phosphatidyl glycerol (DSPG), cholesterol and 1, 2-distearoyl- phosphatidylethanolamine-methyl-polyethyleneglycol conjugate-2000 sodium salt (MPEG 2000 DSPE). The liposomes were prepared using thin film hydration method. The optimization of the formulation was done by employing the QbD approach. The formulation was optimized on the basis of the factors which were affecting the critical quality attributes (CQAs) such as particle size and entrapment efficiency. The final optimized formulation was characterized by assessing the particle size, percent entrapment efficiency, zeta potential, long-term stability, morphology, in vitro release and in vitro cytotoxic activity., Result: PEGylated liposomes having high percent entrapment efficiency (87.25 %±0.72%) could be obtained. The entrapment of drug in the liposomes was confirmed using Differential Scanning Calorimetry (DSC), Fourier Transform Infrared spectroscopy (FT-IR) and Powder X-Ray diffraction (PXRD) studies. The mean particle size of the liposomes was 113 nm±67nm and they were found to exhibit sustained release profile (56.59 %±0. 43% drug in 24h). The Small Angle Neutron Scattering (SANS) analysis revealed that the liposomes were uniform sized LUVs (nm) and were spherical in shape. The shape of the liposomes was further confirmed by transmission electron microscopy (TEM). Long term stability study indicated that the formulation was stable for three months. Sulphorhodamine B (SRB) cytotoxicity assay was carried out in HT-29 cell to prove that the PEGylated liposomal formulations had higher cytotoxicity than the conventional liposomes after 48 hours of incubation., Conclusion: The study affirmed that MLX loaded PEGylated liposomes had superior in vitro cytotoxicity as compared to the free drug as well as conventional liposomes. QbD resulted in the fabrication of a stable liposomal formulation with all the desirable characteristics. Hence, MLX loaded PEGylated liposomes can be considered to be a promising system for the delivery of MLX., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.)