Search

Nowadays, there is interest in developing gamma-ray measuring devices based on the room temperature operated medium resolution detectors such as semiconductor detectors of the CdZnTe type and scintillators of the LaBr3 type. This is true also for safeguards applications and the International Atomic Energy Agency (IAEA) has launched a project devoted to the assessment of medium resolution gamma-ray spectroscopy for the verification of the isotopic composition of U and Pu bearing samples. This project is carried out within the Non-Destructive Assay Working Group of the European Safeguards Research and Development Association (ESARDA). In this study we analyze medium resolution spectra of U and Pu standards with the aim to develop an isotopic composition determination algorithm, particularly suited for these types of detectors. We show how the peak shape of a CdZnTe detector is influenced by the instrumentation parameters. The experimental setup consisted of a 500 mm3 CdZnTe detector, a 2×2 inch LaBr3 detector, two types of measurement instrumentation – an analogue one and a digital one, and a set of certified samples – a 207Bi point source and U and Pu CBNM standards. The results of our measurements indicate that the lowest contribution to the peak asymmetry and thus the smallest impact on the resolution of the 500 mm3 CdZnTe detector was achieved with the digital MCA. Analysis of acquired spectra allowed to reject poor quality measurement runs and produce summed spectra files with the least impact of instrumentation instabilities. This work is preliminary to further studies concerning the development of an isotopic composition determination algorithm particularly suited for CZT and LaBr3 detectors for safeguards applications.

Few data exist regarding the yields and time spectra of delayed neutrons from the photofission reaction on actinides. In this paper, we report the characteristics of both six-group and eight-group delayed neutron time models for the photofission of 238U induced by a Bremsstrahlung photon spectrum with an end-point energy at 9 MeV. This study was conducted using a 9 MeV linear electron accelerator housed at the SAPHIR platform located at CEA Paris-Saclay, France. A reference sample of depleted uranium was positioned inside a neutron detection block, previously designed and optimized by Monte Carlo simulation, made of high-density polyethylene covered by cadmium and including ten one meter-long 3He proportional counters. Based on the consistent set of half-lives proposed by Spriggs et al. as early as 1999 for neutroninduced fission, our description in eight delayed neutron groups for 238U at 9 MeV is the first published for photofission. These new results bring valuable information to the scarce data available in the literature and represent useful inputs for the development of photofission-based nuclear measurement systems as they meet a significant interest in the fields of nuclear data, radioactive waste package characterization and for security-related applications.