Search

Many geospatial analyses require flexible aggregation of adjacent units to meet a minimum target area or attribute value. This is usually accomplished using several non-automated and complex GIS tasks. We developed an integrated user-friendly approach and algorithm implemented in the 'GHS-SmartDissolve' tool, which addresses minimum mapping unit or attribute value requirements, layers resolution mismatch, spatial uncertainty or modifiable areal unit problem in GIScience. This method automatically dissolves adjacent features updating fields' values to reach a minimum target area or attribute value, using a flexible settings framework to meet user requirements. Also provided as a toolbox for ArcGIS (Esri), the approach is demonstrated by (i) estimating the mean particulate matter concentrations for all municipalities in Italy in 2011 by combining a coarse grid of global PM2.5 concentrations with fine administrative units; (ii) estimating boundaries of Metropolitan areas in Portugal as aggregation of municipalities, by matching their total population. [ABSTRACT FROM AUTHOR]

The application of last-generation spatial data modelling, integrating Earth Observation, population, economic and other spatially explicit data, enables insights into the sustainability of the global urbanisation processes with unprecedented detail, consistency, and international comparability. In this study, the land use efficiency indicator, as developed in the Sustainable Development Goals, is assessed globally for the first time at the level of Functional Urban Areas (FUAs). Each FUA includes the city and its commuting zone as inferred from statistical modelling of available spatial data. FUAs represent the economic area of influence of each urban centre. Hence, the analysis of land consumption within their boundary has significance in the fields of spatial planning and policy analyses as well as many other research areas. We utilize the boundaries of more than 9,000 FUAs to estimate the land use efficiency between 1990 and 2015, by using population and built-up area data extracted from the Global Human Settlement Layer. This analysis shows how, in the observed period, FUAs in low-income countries of the Global South evolved with rates of population growth surpassing the ones of land consumption. However, in almost all regions of the globe, more than half of the FUAs improved their land use efficiency in recent years (2000–2015) with respect to the previous decade (1990–2000). Our study concludes that the spatial expansion of urban areas within FUA boundaries is reducing compactness of settlements, and that settlements located within FUAs do not display higher land use efficiency than those outside FUAs. • Land Use Efficiency (SDG 11.3.1) is assessed in all FUAs of the world. • FUAs in the Global South show population growing faster than land consumption. • Development trajectories in FUAs show an improvement of efficiency in recent years. • Settlements within FUA commuting areas are not more efficient than those outside. • The proportion of urban centre population does not imply higher efficiency of the FUA. [ABSTRACT FROM AUTHOR]

The Global Human Settlement Layer (GHSL) produces new global spatial information, evidence-based analytics describing the human presence on the planet that is based mainly on two quantitative factors: (i) the spatial distribution (density) of built-up structures and (ii) the spatial distribution (density) of resident people. Both of the factors are observed in the long-term temporal domain and per unit area, in order to support the analysis of the trends and indicators for monitoring the implementation of the 2030 Development Agenda and the related thematic agreements. The GHSL uses various input data, including global, multi-temporal archives of high-resolution satellite imagery, census data, and volunteered geographic information. In this paper, we present a global estimate for the Land Use Efficiency (LUE) indicator—SDG 11.3.1, for circa 10,000 urban centers, calculating the ratio of land consumption rate to population growth rate between 1990 and 2015. In addition, we analyze the characteristics of the GHSL information to demonstrate how the original frameworks of data (gridded GHSL data) and tools (GHSL tools suite), developed from Earth Observation and integrated with census information, could support Sustainable Development Goals monitoring. In particular, we demonstrate the potential of gridded, open and free, local yet globally consistent, multi-temporal data in filling the data gap for Sustainable Development Goal 11. The results of our research demonstrate that there is potential to raise SDG 11.3.1 from a Tier II classification (manifesting unavailability of data) to a Tier I, as GHSL provides a global baseline for the essential variables called by the SDG 11.3.1 metadata. [ABSTRACT FROM AUTHOR]

Exposure is reported to be the biggest determinant of disaster risk, it is continuously growing and by monitoring and understanding its variations over time it is possible to address disaster risk reduction, also at the global level. This work uses Earth observation image archives to derive information on human settlements that are used to quantify exposure to five natural hazards. This paper first summarizes the procedure used within the global human settlement layer (GHSL) project to extract global built-up area from 40 year deep Landsat image archive and the procedure to derive global population density by disaggregating population census data over built-up area. Then it combines the global built-up area and the global population density data with five global hazard maps to produce global layers of built-up area and population exposure to each single hazard for the epochs 1975, 1990, 2000, and 2015 to assess changes in exposure to each hazard over 40 years. Results show that more than 35% of the global population in 2015 was potentially exposed to earthquakes (with a return period of 475 years); one billion people are potentially exposed to floods (with a return period of 100 years). In light of the expansion of settlements over time and the changing nature of meteorological and climatological hazards, a repeated acquisition of human settlement information through remote sensing and other data sources is required to update exposure and risk maps, and to better understand disaster risk and define appropriate disaster risk reduction strategies as well as risk management practices. Regular updates and refined spatial information on human settlements are foreseen in the near future with the Copernicus Sentinel Earth observation constellation that will measure the evolving nature of exposure to hazards. These improvements will contribute to more detailed and data-driven understanding of disaster risk as advocated by the Sendai Framework for Disaster Risk Reduction. [ABSTRACT FROM AUTHOR]

Measuring rates of coverage and spatial access to healthcare services is essential to inform policies for development. These rates tend to reflect the urban-rural divide, typically with urban areas experiencing higher accessibility than rural ones. Especially in Sub-Saharan Africa (SSA), a region experiencing high disease burden amid fast urbanisation and population growth. However, such assessment has been hindered by a lack of updated and comparable geospatial data on urbanisation and health facilities. In this study, we apply the UN-endorsed Degree of Urbanisation (DoU or DEGURBA) method to investigate how geographic access to healthcare facilities varies across the urban-rural continuum in SSA as a whole and in each country, for circa 2020. Results show that geographic access is overall highest in cities and peri-urban areas , where more than 95% of inhabitants live within 30 min from the nearest HCF, with this share decreasing to 80–90% in towns. This share is lowest in villages and dispersed rural areas (65%), with about 10–15% of population more than 3 h away from any health post. Challenges in geographic access seem mostly determined by high travel impedance, since overall spatial densities of HCF are comparable to European levels. • The Degree of Urbanisation enables monitoring the urban-rural access to resources and services across boundaries worldwide. • This work characterizes distribution and accessibility of Health Care Facilities (HCF) by Degree of Urbanisation (DoU). • The accessibility to HCF at given travel time bins is shown by HCF tier of specialisation and share of covered population. • Access to HCF varies significantly across countries, and within countries by DoU territorial class (Fig. 7). • HCF are widespread in Sub-Saharan Africa but the inadequate infrastructure makes them inaccessible, notably in rural areas. [ABSTRACT FROM AUTHOR]

Knowing where emissions occur is essential for planning effective emission reduction measures and for atmospheric modelling. Emission inventories are typically compiled at national level and provide sector-specific emission estimates. Disaggregating national emissions on high-resolution grids requires spatial proxies that contain information on the location of different emission sources (e.g. point sources, linear and area sources). Knowing the correct allocation of emissions from point sources is essential to avoid the misallocating high emission levels. However, gathering information on point sources covering the entire globe and a wide temporal domain (1970 to present) is challenging due to limited data availability, accuracy of the reporting and completeness of data. The latest spatial proxies developed as part of the Emissions Database for Global Atmospheric Research (EDGARv8.0) provide the user with the possibility to work with different geographical details using a consistently developed GHG emissions database. A key novelty of EDGARv8.0 is the possibility to analyse sub-national GHG emissions over the European domain, but also over the US, China, India and main world countries. The relevance of using updated spatial information is assessed on the basis of regional case studies. [ABSTRACT FROM AUTHOR]

In the last few decades the magnitude and impacts of planetary urban transformations have become increasingly evident to scientists and policymakers. The ability to understand these processes remained limited in terms of territorial scope and comparative capacity for a long time: data availability and harmonization were among the main constraints. Contemporary technological assets, such as remote sensing and machine learning, allow for analyzing global changes in the settlement process with unprecedented detail. The Global Human Settlement Layer (GHSL) project set out to produce detailed datasets to analyze and monitor the spatial footprint of human settlements and their population, which are key indicators for the global policy commitments of the 2030 Development Agenda. In the GHSL, Earth Observation plays a key role in the detection of built-up areas from the Landsat imagery upon which population distribution is modelled. The combination of remote sensing imagery and population modelling allows for generating globally consistent and detailed information about the spatial distribution of built-up areas and population. The GHSL data facilitate a multi-temporal analysis of human settlements with global coverage. The results presented in this article focus on the patterns of development of built-up areas, population and settlements. The article reports about the present status of global urbanization (2015) and its evolution since 1990 by applying to the GHSL the Degree of Urbanisation definition of the European Commission Directorate General for Regional and Urban Policy (DG-Regio) and the Statistical Office of the European Communities (EUROSTAT). The analysis portrays urbanization dynamics at a regional level and per country income classes to show disparities and inequalities. This study analyzes how the 6.1 billion urban dwellers are distributed worldwide. Results show the degree of global urbanization (which reached 85% in 2015), the more than 100 countries in which urbanization has increased between 1990 and 2015, and the tens of countries in which urbanization is today above the global average and where urbanization grows the fastest. The paper sheds light on the key role of urban areas for development, on the patterns of urban development across the regions of the world and on the role of a new generation of data to advance urbanization theory and reporting. [ABSTRACT FROM AUTHOR]

Spatially consistent and up-to-date maps of human settlements are crucial for addressing policies related to urbanization and sustainability, especially in the era of an increasingly urbanized world. The availability of open and free Sentinel-2 data of the Copernicus Earth Observation program offers a new opportunity for wall-to-wall mapping of human settlements at a global scale. This paper presents a deep-learning-based framework for a fully automated extraction of built-up areas at a spatial resolution of 10 m from a global composite of Sentinel-2 imagery. A multi-neuro modeling methodology building on a simple Convolution Neural Networks architecture for pixel-wise image classification of built-up areas is developed. The core features of the proposed model are the image patch of size 5 × 5 pixels adequate for describing built-up areas from Sentinel-2 imagery and the lightweight topology with a total number of 1,448,578 trainable parameters and 4 2D convolutional layers and 2 flattened layers. The deployment of the model on the global Sentinel-2 image composite provides the most detailed and complete map reporting about built-up areas for reference year 2018. The validation of the results with an independent reference dataset of building footprints covering 277 sites across the world establishes the reliability of the built-up layer produced by the proposed framework and the model robustness. The results of this study contribute to cutting-edge research in the field of automated built-up areas mapping from remote sensing data and establish a new reference layer for the analysis of the spatial distribution of human settlements across the rural–urban continuum. [ABSTRACT FROM AUTHOR]