Search

This paper proposes a 10 × 10 MIMO multiband broadband planar antenna for tablets or laptops. The designed antennas cover a large number of the popular sub‐6‐GHz application bands, such as 0.617–0.96, 2.1–2.7, 3.5–4.5, and 6.1–7.2 GHz for public safety communications, radio systems, Bluetooth, Wi‐Fi, and satellite communications. The proposed antenna is designed with grounded branches, which can generate a wide bandwidth and cover most of the sub‐6‐GHz application band by coupling between branches of different lengths and antennas. MIMO antennas have been measured to have an envelope correlation coefficient of less than 0.7 and have met the standards set by international organizations for human radiation absorption simulations. The proposed antenna validates the unique 10 × 10 MIMO antenna structure and feasibility. Multiple operable frequency bands are realized, and the radiation effect of the antenna on the human body is analyzed if it complies with international market standards. The proposed antenna design is well suited for multiband and broadband requirements. [ABSTRACT FROM AUTHOR]

This paper designs a bandpass filter for D‐band and 0.18 μm complementary metal oxide semiconductor (CMOS) process. The bandpass filter is composed of an inverted L‐shaped coupling microstrip line and a cross‐coupled resonator, and is coupled to produce two controlled transmission zeros. A defected ground structure is used to make a good impedance match. The designed filter has a 3 dB impedance bandwidth of 52 GHz (149–201 GHz) with a center frequency of 175 GHz and an insertion loss of 3.23 dB. The design of this paper is a CMOS 0.18 μm process capable of applying the D‐band bandpass filter with the advantages of lower insertion loss, broadband, and compact size. [ABSTRACT FROM AUTHOR]

This article proposes a Ka‐band substrate integrated waveguide (SIW) quasi‐Yagi array antenna with the advantages of thinness, compactness, wide bandwidth, and higher gain. Analyzing the microstrip‐to‐SIW transition structure to confirm that the designed structure provides the best performance, the optimum reflectance coefficient bandwidth can be obtained. With the optimized rectangular etched slot structure at the antenna end, the impedance matching can be tuned to improve the bandwidth. The designed array antenna is fabricated and measured for verification. The substrate is based on Al2O3 ceramic and the antenna size is 23.3 mm × $\times $ 13 mm × $\times $ 0.5 mm. The measurement results indicate that the antenna achieves an impedance bandwidth of 13.59% below −10dB, with an average gain of approximately 7 dBi and a peak gain of 7.4 dBi in 28.1–32.2 GHz. Therefore, the 1*2 antenna proposed in this paper has the advantages of compact and planar structure, easy fabrication, and easy integration into RF circuits, which is very suitable for Ka‐Band applications. [ABSTRACT FROM AUTHOR]