Search

Binary compositions of surface ligands are known to improve the colloidal stability and fluorescence quantum yield of nanocrystals (NCs), due to ligand-ligand interactions and surface organization. Herein, we follow the thermodynamics of a ligand exchange reaction of CdSe NCs with alkylthiols mixtures. The effects of ligand polarity and length difference on ligand packing were investigated using isothermal titration calorimetry (ITC). The thermodynamic signature of the formation of mixed ligand shells was observed. Correlating the experimental results with thermodynamic mixing models has allowed us to calculate the inter-chain interactions and infer the final ligand shell configuration. Our findings demonstrate that the small dimensions of the NCs and the subsequent increased interfacial region between dissimilar ligands, in contrast to macroscopic surfaces, allow the formation of a myriad of clustering patterns, controlled by the inter-ligand interactions. This work provides a fundamental understanding of the parameters determining the ligand shell structure and should help guide smart surface design toward NC-based applications., 28 pages, 4 figures; combines with SI file 24 pages, 14 figures, 9 tables

Soft lithography techniques have become leading mesoscale approaches for replicating topographic features in polymer films. So far, modified polymer films formed by soft lithography only featured topographic heterogeneity. Here we demonstrate the application of soft lithography techniques to block copolymer films, and show that the preferential affinity of one of the blocks to the stamping material leads to chemical heterogeneity that corresponds to the topographic features. Detailed surface and structural characterization of the patterned films provided information on its three-dimensional structure, revealing insights on the domain reorganization that takes place in the block copolymer film concomitantly with topography formation. The formed structures were utilized for the selective assembly of gold nanoparticles into hierarchical structures. The versatility of this combined nanofabrication/self-assembly approach was demonstrated by the assembly of two types of metallic nanoparticles into two different arrangements with full control over the location of each type of nanoparticles.

Directed self-assembly of block copolymers is evolving toward applications that are more defect-tolerant but still require high morphological control and could benefit from simple, inexpensive fabrication processes. Previously, we demonstrated that simply casting ultra-thin block copolymer films on topographically defined substrates leads to hierarchical structures with dual patterns in a controlled manner and unraveled the dependence of the local morphology on the topographic feature dimensions. In this article, we discuss the extreme of the ultraconfined thickness regime at the border of film dewetting. Additional non-bulk morphologies are observed at this extreme, which further elaborate the arsenal of dual patterns that could be obtained in coexistence with full placement control. It is shown that as the thickness confinement approaches its limit, lateral confinement imposed by the width of the plateaus becomes a critical factor influencing the local morphology.

The ability to create mixed morphologies using easily controlled parameters is crucial for the integration of block copolymers in advanced technologies. We have previously shown that casting an ultrathin block copolymer film on a topographically patterned substrate results in different deposited thicknesses on the plateaus and in the trenches, which leads to the co-existence of two patterns. In this work, we highlight the dependence of the dual patterns on the film profile. We suggest that the steepness of the film profile formed across the plateau edge affects the nucleation of microphase-separated domains near the plateau edges, which influences the morphology that develops on the plateau regions. An analysis of the local film thicknesses in multiple samples exhibiting various combinations of plateau and trench widths for different trench depths enabled the construction of phase diagrams, which unraveled the intricate dependence of the formed patterns not only on the curvature of the film profile but also on the fraction of the film that resides in the trenches. Our analysis facilitates the prediction of the patterns that would develop in the trenches and on the plateaus for a given block copolymer film of known thickness from the dimensions of the topographic features.

The collective properties of ordered ensembles of anisotropically shaped nanoparticles depend on the morphology of organization. Here, we describe the utilization of block copolymer micelles to bias the natural packing tendency of semiconductor nanorods and organize them into circularly arranged superstructures. These structures are formed as a result of competition between the segregation tendency of the nanorods in solution and in the polymer melt; when the nanorods are highly compatible with the solvent but prefer to segregate in the melt to the core-forming block, they migrate during annealing toward the core–corona interface, and their superstructure is, thus, templated by the shape of the micelle. The nanorods, in turn, exhibit surfactant-like behavior and protect the micelles from coalescence during annealing. Lastly, the influence of the attributes of the micelles on nanorod organization is also studied. The circular nanorod arrangements and the insights gained in this study add to a growing list of possibilities for organizing metal and semiconductor nanorods that can be achieved using rational design.

The surface ligands of semiconductor nanocrystals (NCs) are central for determining their properties and for their flexible implementation in diverse applications. Thus far, the thermodynamic characteristics of ligand exchange reactions were attained by indirect methods. Isothermal titration calorimetry is utilized to directly and independently measure both the equilibrium constant and the reaction enthalpy of a model ligand exchange reaction from oleate-capped CdSe NCs to a series of alkylthiols. Increased reaction exothermicity for longer chains, accompanied by a decrease in reaction entropy with an overall enthalpy-entropy compensation behavior is observed, explained by the length-dependent interchain interactions and the organization of the bound ligands on the NCs' surface. An increase in the spontaneity of the reaction with decreasing NC size is also revealed, due to their enhanced surface reactivity. This work provides a fundamental understanding of the physicochemical properties of the NC surface with implications for NC surface ligand design.

Surface ligands of semiconductor nanocrystals (NCs) play key roles in determining their colloidal stability and physicochemical properties and are thus enablers also for the NCs flexible manipulation toward numerous applications. Attention is usually paid to the ligand binding group, while the impact of the ligand chain backbone structure is less discussed. Using isothermal titration calorimetry (ITC), we studied the effect of structural changes in the ligand chain on the thermodynamics of the exchange reaction for oleate coated CdSe NCs, comparing linear and branched alkylthiols. The investigated alkylthiol ligands differed in their backbone length, branching position, and branching group length. Compared to linear ligands, lower exothermicity and entropy loss were observed for an exchange with branched ligands, due to steric hindrance in ligand packing, thereby justifying their previous classification as "entropic ligands". Mean-field calculations for ligand binding demonstrate the contribution to the overall entropy originating from ligand conformational entropy, which is diminished upon binding mainly by packing of NC-bound ligands. Model calculations and the experimental ITC data both point to an interplay between the branching position and the backbone length in determining the entropic nature of the branched ligand. Our findings suggest that the most entropic ligand should be a short, branched ligand with short branching group located toward the middle of the ligand chain. The insights provided by this work also contribute to a future smarter NC surface design, which is an essential tool for their implementation in diverse applications.

The soft lattice of lead-halide perovskite nanocrystals (NCs) allows tuning their optoelectronic characteristics via anion exchange by introducing halide salts to a solution of perovskite NCs. Similarly, cross-anion exchange can occur upon mixing NCs of different perovskite halides. This process, though, is detrimental for applications requiring perovskite NCs with different halides in close proximity. We study the effects of various stabilizing surface ligands on the kinetics of the cross-anion exchange reaction, comparing zwitterionic and ionic ligands. The kinetic analysis, inspired by the "cage effect" for solution reactions, showcases a mechanism where the surface capping ligands act as anion carriers that diffuse to the NC surface, forming an encounter pair enclosed by the surrounding ligands that initiates the anion exchange process. The zwitterionic ligands considerably slow down the cross-anion exchange process, and while they do not fully inhibit it, they confer improved stability alongside enhanced solubility relevant for various applications., Nano Letters, 22 (11), ISSN:1530-6984, ISSN:1530-6992

Coupled colloidal quantum dot (CQD) dimers represent a new class of artificial molecules composed of fused core/shell semiconductor nanocrystals. The electronic coupling and wavefunction hybridization is enabled by the formation of an epitaxial connection with a coherent lattice between the shells of the two neighboring quantum dots where the shell material and its dimensions dictate the quantum barrier characteristics for the charge carriers. Herein we introduce a colloidal approach to control the neck formation at the interface between the two CQDs in such artificial molecular constructs. This allows the tailoring of the neck barrier in pre-linked homodimers formed via fusion of multifaceted wurtzite CdSe/CdS CQDs. The effects of reaction time, temperature and excess ligands is studied. The neck filling process follows an intraparticle ripening mechanism at relatively mild reaction conditions while avoiding inter-particle ripening. The degree of surface ligand passivation plays a key role in activating the surface atom diffusion to the neck region. The degree of neck filling strongly depends also on the initial relative orientation of the two CQDs, where homonymous plane attachment allows for facile neck growth, unlike the case of heteronymous plane attachment. Upon neck-filling, the observed red-shift of the absorption and fluorescence measured both for ensemble and single dimers, is assigned to enhanced hybridization of the confined wavefunction in CQD dimer molecules, as supported by quantum calculations. The fine tuning of the particle interface introduced herein provides therefore a powerful tool to further control the extent of hybridization and coupling in CQD molecules., Article- 19 pages, 5 figures; SI- 18 pages, 12 figures. Journal of the American Chemical Society Article ASAP, 2021

Various types of devices require hierarchically nanopatterned substrates, where the spacing between patterned domains is controlled. Ultraconfined films exhibit extreme morphological sensitivity to slight variations in film thickness when the substrate is highly selective toward one of the blocks. Here, it is shown that using the substrate's topography as a thickness differentiating tool enables the creation of domains with different surface patterns in a fully controlled fashion from a single, unblended block copolymer. This approach is applicable to block copolymers of different compositions and to different topographical patterns and thus opens numerous possibilities for the hierarchical construction of multifunctional devices.

The recent technological advancements have greatly improved the quality and resolution of displays. Yet, issues like full color gamut representation and long lasting durability of the color emitters require further progression. Colloidal quantum dots manifest an inherent narrow spectral emission with optical stability, combined with various chemical processability options which will allow for their integration in display applications. Apart from their numerous advantages, they also present unique opportunities for the next technological leaps in the field., 25 pages, 7 figures

Polyelectrolyte multilayers gain their importance from their applicability to a wide variety of functional building blocks. The ability to create these multilayers as laterally nano-patterned films, which has only been scarcely investigated so far, augments the functionality of the multilayer and makes it valuable for applications that require nanoscale features or periodic arrangement, such as photonic devices, catalytic surfaces, and biomedical applications. In this study we reveal how the lateral confinement imposed by block copolymer nano-domains in thin film templates affects the assembly of the deposited polyelectrolyte layers at different ionic strengths, and how the combined effects of nano-confinement and ionic strength dictate the final structure of the multilayer. These fundamental insights provide the basis for successful construction of nano-patterned, functional coatings.

Colloidal semiconductor nanocrystals (SCNCs) or, more broadly, colloidal quantum nanostructures constitute outstanding model systems for investigating size and dimensionality effects. Their nanoscale dimensions lead to quantum confinement effects that enable tuning of their optical and electronic properties. Thus, emission color control with narrow photoluminescence spectra, wide absorbance spectra, and outstanding photostability, combined with their chemical processability through control of their surface chemistry leads to the emergence of SCNCs as outstanding materials for present and next-generation displays. In this Review, we present the fundamental chemical and physical properties of SCNCs, followed by a description of the advantages of different colloidal quantum nanostructures for display applications. The open challenges with respect to their optical activity are addressed. Both photoluminescent and electroluminescent display scenarios utilizing SCNCs are described., Comment: 59 pages, 13 figures

The construction of nano-sized, two-dimensionally ordered nanoparticle (NP) superstructures is important for various advanced applications such as photonics, sensing, catalysis, or nano-circuitry. Currently, such structures are fabricated using the templated organization approach, in which the templates are mainly created by photo-lithography or laser-lithography and other invasive top-down etching procedures. In this work, we present an alternative bottom-up preparation method for the controlled deposition of NPs into hierarchical structures. Lamellar polystyrene-block-poly(2-vinylpyridinium) thin films featuring alternating stripes of neutral PS and positively charged P2VP domains serve as templates, allowing for the selective adsorption of negatively charged gold NPs. Dense NP assembly is achieved by a simple immersion process, whereas two-dimensionally ordered arrays of NPs are realized by microcontact printing (μCP), utilizing periodic polydimethylsiloxane wrinkle grooves loaded with gold NPs. This approach enables the facile construction of hierarchical NP arrays with variable geometries. Copyright © 2016 John Wiley & Sons, Ltd.

A block copolymer-based assembly approach for the creation of nano-patterned polyelectrolyte multilayers over cm2-scale areas is presented. Up to 5 bi-layers were selectively assembled on top of specific nano-domains featuring different morphologies. The successful isolation of nanoscale objects corresponding in shape to the template features is also demonstrated. This methodology is applicable to different types of polyelectrolytes, and opens up a new dimension for layer-by-layer construction.

The coassembly of A–B diblock copolymers with B′-type nanoparticles (i.e., nanoparticles that are slightly incompatible with the B domain) leads to hierarchical structures, where the block copolymer phase separates first and the nanoparticles create close-packed arrays within the B domains due to a slower, secondary phase separation process. Here we report the results of a comprehensive study, which focused on two aspects: the influence of the nanoparticle shape (spherical vs rod-like) and the effect of the volume composition of the blocks. Three polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) copolymers featuring similar molecular weights but differing in PS volume fraction were mixed with spherical and rod-shaped poly(ethylene oxide)- (PEO-) capped CdS nanoparticles at different filling fractions and cast as thin films. Our results highlight the mutual influence between the block copolymer and the nanoparticles on the resulting morphology, demonstrating the ability to control the film morphology...

© 2016 Elsevier Ltd The combination of block copolymer templating with electrostatic self-assembly provides a simple and robust method for creating nano-patterned polyelectrolyte multilayers over large areas. The deposition of the first polyelectrolyte layer provides important insights on the initial stages of multilayer buildup. Here, we focus on two-dimensionally confined “dots” patterns afforded by block copolymer films featuring hexagonally-packed cylinders that are oriented normal to the substrate. Rendering the cylinder caps positively charged enables the selective deposition of negatively charged polyelectrolytes on them under salt-free conditions. The initially formed polyelectrolyte nanostructures adopt a toroidal (“doughnut”) shape, which results from retraction of dangling polyelectrolyte segments into the “dots” upon drying. With increasing exposure time to the polyelectrolyte solution, the final shape of the deposited polyelectrolyte transitions from a doughnut to a hemisphere. These insights would enable the creation of patterned polyelectrolyte multilayers with increased control over adsorption selectivity of the additional incoming polyelectrolytes.

© The Royal Society of Chemistry 2016. Nano-patterned materials are beneficial for applications such as solar cells, opto-electronics, and sensing owing to their periodic structure and high interfacial area. Here, we present a non-lithographic approach for assembling polyelectrolytes into periodic nanoscale patterns over cm2-scale areas. Chemically modified block copolymer thin films featuring alternating charged and neutral domains are used as patterned substrates for electrostatic self-assembly. In-depth characterization of the deposition process using spectroscopy and microscopy techniques, including the state-of-the-art scanning transmission X-ray microscopy (STXM), reveals both the selective deposition of the polyelectrolyte on the charged copolymer domains as well as gradual changes in the film topography that arise from further penetration of the solvent molecules and possibly also the polyelectrolyte into these domains. Our results demonstrate the feasibility of creating nano-patterned polyelectrolyte layers, which opens up new opportunities for structured functional coating fabrication.

Top-down fabricated nanoantenna architectures of both metallic and dielectric materials demonstrated powerful functionalities for Raman and fluorescence enhancement with relevance to single molecule sensing, while inducing directionality of chromophore emission with implications for single photon sources. Herein, we synthesize the smallest bowtie nanoantenna by selective tip-to-tip fusion of two tetrahedral colloidal quantum dots (CQDs) forming a dimer. While the tetrahedral monomers emit non-polarized light, the bowtie architecture manifests nanoantenna functionality of enhanced emission polarization along the bowtie axis as predicted theoretically and revealed by single particle spectroscopy. Theory also predicts the formation of an electric-field hotspot at the bowtie epicenter. This is utilized for selective light induced photocatalytic metal growth at that location, unlike growth on the free tips in dark conditions thus demonstrating the bowtie dimer functionality as a photochemical reaction center. Our findings pave a path for additional bottom-up bowtie architectures applicable in optics, sensing and photocatalysis., Comment: 9 pages, 5 figures