Search

The Planck mission provided all-sky dust emission maps in the submm to mm range at an angular resolution of 5'. In addition, some specific sources can be observed at long wavelengths and higher resolution using ground-based telescopes. These observations are limited to small scales and require extensive data processing before they become available for scientific analysis. They also suffer from extended emission filtering. At present, we are still unable to fully understand the emissivity variations observed in different astrophysical environments at long wavelengths. It is therefore challenging to estimate any dust emission in the submm-mm at a better resolution than the 5' from Planck. In this analysis, based on supervised deep learning algorithms, we produced dust emission predictions in the two Planck bands centered at 850 mic and 1.38 mm, at the Herschel resolution (37''). Herschel data of Galactic environments, ranging from 160 to 500 mic and smoothed to 5', were used to train the neural network. Then, using Herschel data only, the model was applied to predict dust emission maps at 37''. The neural network is capable of reproducing dust emission maps of various Galactic environments. Remarkably, it also performs well for nearby extragalactic environments. This could indicate that large dust grains have similar properties in both our Galaxy and nearby galaxies, or at least that their spectral behaviors are comparable in Galactic and extragalactic environments. We provide dust emission prediction maps at 850 mic and 1.38 mm at the 37'' of several surveys: Hi-GAL, Gould Belt, Cold Cores, HERITAGE, Helga, HerM33es, KINGFISH, and VNGS. The ratio of these two wavelength brightness bands reveals a derived emissivity spectral index statistically close to 1 for all the surveys, which favors the hypothesis of a flattened dust emission spectrum for wavelengths larger than 850 mic., Comment: Accepted for publication in A&A (18 pages)

In this paper we aim to constrain for the first time the dust emission in the mid-to-far infrared domain, in the LMC, with the use of the Spitzer IRS and MIPS SED data, combined with Herschel data. We also consider UV extinction predictions derived from modeling. We selected 10 regions observed as part of the SAGE-Spec program, to probe dust properties in various environments (diffuse, molecular and ionized regions). All data were smoothed to the 40arcsec angular resolution. The SEDs were modeled with DustEM models, using the standard Mathis RF, as well as three additional RFs, with stellar clusters ages ranging from 4 Myr to 600 Myr. Standard dust models used to reproduce the Galactic diffuse medium are clearly not able to reproduce the dust emission in the MIR wavelength domain. This analysis evidences the need of adjusting parameters describing the dust size distribution and shows a clear distinct behavior according to the type of environments. In addition, whereas the small grain emission always seems to be negligible at long wavelengths in our Galaxy, the contribution of this small dust component could be more important than expected, in the submm-mm range, in the LMC averaged SED. Properties of the small dust component of the LMC are clearly different from those of our Galaxy. Its abundance, significantly enhanced, could be the result of large grains shattering due to strong shocks or turbulence. In addition, this grain component in the LMC systematically shows smaller grain size in the ionized regions compared to the diffuse medium. Predictions of extinction curves show significantly distinct behaviors depending on the dust models but also from one region to another. Comparison of model predictions with the LMC mean extinction curve shows that no model gives satisfactory agreement using the Mathis radiation field while using a harder radiation field tends to improve the agreement, Comment: Accepted for publication in A&A

Cosmic dust models are key ingredients in advancing our understanding of astronomical environments as diverse as interstellar clouds in galaxies, circumstellar envelopes around evolved and young stars, and protoplanetary disks. Such models consist of several dust populations, each with different compositions and size distributions. They may also consider different grain shapes, although most models assume spherical grains. All include a component of silicate dust. The absorption and emission properties of these dust components are calculated from the optical constants of each dust material which have various experimental, phenomenological, and theoretical origins depending on the model. We aim to provide the community with new sets of optical constants for amorphous silicate dust analogues at low temperatures. The analogues consist of four Mg-rich silicate samples of stoichiometry ranging from enstatite to olivine, and of eight samples of Mg and Fe rich silicates with a pyroxene stoichiometry and differing magnesium and iron content. We calculated the optical constants from transmission measurements using the Kramers-Kronig relations, assuming that the grains are small compared to the wavelength and prolate in shape with axis ratios of 1.5 and 2 for the Mg and Fe rich samples, respectively. New optical constants for silicate dust analogues were calculated over the wavelength range from 5 to 800-1000 microns, depending on the sample, and at temperatures of 10, 30, 100, 200, and 300 K.We determined the uncertainties on the derived optical constants based on the assumptions used to calculate them. To facilitate the use of these data in cosmic dust models, we provide optical constants extrapolated outside the measured spectral range into the UV-NIR and mm-cm wavelength ranges, as well as formulae that can be used to interpolate them at any temperature in the range 10 - 300 K.

In this present analysis we investigate the dust properties associated with the different gas phases (including the ionized phase this time) of the LMC molecular clouds at 1$^{\prime}$ angular resolution (four times greater than a previous analysis) and with a larger spectral coverage range thanks to Herschel data. We also ensure the robustness of our results in the framework of various dust models. We performed a decomposition of the dust emission in the infrared (3.6 $\mic$ to 500 $\mic$) associated with the atomic, molecular, and ionized gas phases in the molecular clouds of the LMC. The resulting spectral energy distributions were fitted with four distinct dust models. We then analyzed the model parameters such as the intensity of the radiation field and the relative dust abundances, as well as the slope of the emission spectra at long wavelengths. This work allows dust models to be compared with infrared data in various environments for the first time, which reveals important differences between the models at short wavelengths in terms of data fitting (mainly in the PAH bands). In addition, this analysis points out distinct results according to the gas phases, such as dust composition directly affecting the dust temperature and the dust emissivity in the submm, and different dust emission in the near-infrared (NIR). We observe direct evidence of dust property evolution from the diffuse to the dense medium in a large sample of molecular clouds in the LMC. In addition, the differences in the dust component abundances between the gas phases could indicate different origins of grain formation. We also point out the presence of a NIR-continuum in all gas phases, with an enhancement in the ionized gas. We favor the hypothesis of an additional dust component as the carrier of this continuum., Comment: Accepted for publication in A&A, 20 pages, 14 figures, 4 tables

To model the cold dust emission observed in the diffuse interstellar medium, in dense molecular clouds or in cold clumps that could eventually form new stars, it is mandatory to know the physical and spectroscopic properties of this dust and to understand its emission. This work is a continuation of previous studies aiming at providing astronomers with spectroscopic data of realistic cosmic dust analogues for the interpretation of observations. Ferromagnesium amorphous silicate dust analogues were produced with a mean composition close to $\mathrm{Mg_{1-x}Fe_{x}SiO_3}$ with x = 0.1, 0.2, 0.3, 0.4. Part of each sample was annealed at 500$^{\circ}$C for two hours in a reducing atmosphere to modify the oxidation state of iron. We have measured the mass absorption coefficient (MAC) of these ferromagnesium amorphous silicate dust analogues in the spectral domain 30 - 1000 $\mu$m for grain temperature in the range 10 - 300 K and at room temperature in the 5 - 40 $\mu$m range. The MAC of ferromagnesium samples behaves in the same way as the MAC of pure Mg-rich amorphous silicate samples. In the 30 - 300 K range, the MAC increases with increasing grain temperature whereas in the range 10 - 30 K, we do not see any change of the MAC. The MAC cannot be described by a single power law in ${\lambda}^{-\beta}$. The MAC of all the samples is much higher than the MAC calculated by dust models. The complex behavior of the MAC of amorphous silicates with wavelength and temperature is observed whatever the exact silicate composition (Mg vs. Fe amount). It is a universal characteristic of amorphous materials, and therefore of amorphous cosmic silicates, that should be taken into account in astronomical modeling. The enhanced MAC of the measured samples compared to the MAC calculated for cosmic dust model implies that dust masses are overestimated by the models.

A wealth of data from the Herschel and Planck satellites and now from ALMA, revealing cold dust thermal emission, is available for astronomical environments ranging from interstellar clouds, cold clumps, circumstellar envelops, and protoplanetary disks. The interpretation of these observations relies on the understanding and modeling of cold dust emission and on the knowledge of the dust optical properties. The aim of this work is to provide astronomers with a set of spectroscopic data of realistic interstellar dust analogues that can be used to interpret the observations. Glassy silicates of mean composition (1-x)MgO - xSiO2 with x = 0.35, 0.40 and 0.50 were synthesized. The mass absorption coefficient (MAC) of the samples was measured in the spectral domain 30 - 1000 $\mu$m for grain temperature in the range 300 K - 10 K and at room temperature in the 5 - 40 $\mu$m domain. We find that the MAC of all samples varies with the grains temperature. In the FIR/submm, and above 30K, the MAC value at a given wavelength increases with the temperature as thermally activated absorption processes appear. The studied materials exhibit different and complex behaviors at long wavelengths (lambda $\geq$ 200 to 700 $\mu$m depending on the samples) and the MAC cannot be approximated by a single power law in ${\lambda}^{-\beta}$. These behaviors are attributed to the amorphous nature of dust and to the amount and nature of the defects within this amorphous structure. Above 20 $\mu$m, the measured MAC are much higher than the MAC calculated from interstellar silicate dust models indicating that the analogues measured in this study are more emissive than the silicates in cosmic dust models. This has important astrophysical implications because masses are overestimated by the models. Moreover, constraints on elemental abundance of heavy elements in cosmic dust models are relaxed

The effect of the Fe-Ga ratio on the magnetic and electric properties of the multiferroic Ga2-xFexO3 compound has been studied in order to determine the composition range exhibiting magnetic and electric orders coexistence and their critical temperatures. A magnetoelectric phase diagram, showing the evolution of both the Neel magnetic ordering temperature and the electric ordering temperature, versus the iron content has been established for x values between 0.9 and 1.4. While the ferrimagnetic Neel temperature increases with the iron content, the electric ordering temperature shows an opposite trend. The electric polarization has been found to exist far above room temperature for the x value of 1.1 composition which shows the highest observed electric ordering temperature of approx. 580K. The compounds with x values of 1.3 and 1.4 are ferrimagnetic-electric relaxors with both properties coexisting at room temperature., Comment: Multiferroic GaFeO3

The Galactic Cold Cores project has made Herschel observations of 116 fields where the Planck survey has found signs of cold dust emission. The fields contain sources in different environments and different phases of star formation. The dust opacity spectral index beta and the dust colour temperature T are derived using Herschel and Planck data. The relation between beta and T is examined for the whole sample and inside individual fields. Based on IRAS and Planck data, the fields are characterised by a median colour temperature of 16.1 K and a median opacity spectral index of beta=1.84. We observe a clear T-beta anti-correlation. In Herschel observations, constrained at lower resolution by Planck data, the variations follow the column density structure and beta(FIR) can rise to ~2.2 in individual clumps. The Planck 217 GHz band shows a systematic excess that is consistent with a general flattening of the dust emission spectrum at millimetre wavelengths. When fitted separately below and above 700 um, the median spectral index values are beta(FIR) ~ 1.91 and beta(mm) ~ 1.66. The spectral index changes as a function of column density and wavelength. Beta variations are partly masked by temperature gradients and the changes in the intrinsic grain properties may be even greater., Comment: Accepted to A&A, 138 pages

Dust properties are very likely affected by the environment in which dust grains evolve. For instance, some analyses of cold clumps (7 K- 17 K) indicate that the aggregation process is favored in dense environments. However, studying warm (30 K-40 K) dust emission at long wavelength ($\lambda$$>$300 $\mu$m) has been limited because it is difficult to combine far infared-to-millimeter (FIR-to-mm) spectral coverage and high angular resolution for observations of warm dust grains. Using Herschel data from 70 to 500 $\mu$m, which are part of the Herschel infrared Galactic (Hi-GAL) survey combined with 1.1 mm data from the Bolocam Galactic Plane Survey (BGPS), we compared emission in two types of environments: ultra-compact HII (UCHII) regions, and cold molecular clumps (denoted as cold clumps). With this comparison we tested dust emission models in the FIR-to-mm domain that reproduce emission in the diffuse medium, in these two environments (UCHII regions and cold clumps). We also investigated their ability to predict the dust emission in our Galaxy. We determined the emission spectra in twelve UCHII regions and twelve cold clumps, and derived the dust temperature (T) using the recent two-level system (TLS) model with three sets of parameters and the so-called T-$\beta$ (temperature-dust emissvity index) phenomenological models, with $\beta$ set to 1.5, 2 and 2.5. We tested the applicability of the TLS model in warm regions for the first time. This analysis indicates distinct trends in the dust emission between cold and warm environments that are visible through changes in the dust emissivity index. However, with the use of standard parameters, the TLS model is able to reproduce the spectral behavior observed in cold and warm regions, from the change of the dust temperature alone, whereas a T-$\beta$ model requires $\beta$ to be known., Comment: Accepted for publication in A&A. 19 pages, 8 figures, 7 tables

Ferroelectric devices use their electric polarization ferroic order as the switching and storage physical quantity for memory applications. However, additional built-in physical quantities and memory paradigms are requested for applications. We propose here to take advantage of the multiferroic properties of ferroelectrics, using ferroelasticity to create a remnant strain, persisting after stressing the material by converse piezoelectricity means. While large electric fields are needed to switch the polarization, here writing occurs at subcoercive much lower field values, which can efficiently imprint multiple remnant strain states. A proof-of-principle device, with the simplest and non-optimized resistance strain detection design, is shown here to exhibit 13-memory states of high reproducibility and reliability. The related advantages in lower power consumption and limited device fatigue make our approach relevant for applications., Comment: Resistive random access memory-like (RRAM) effect is described. Multistate non-volatile ferroelastic-resistive memory

We present a magnetoresistive-photoresistive device based on the interaction of a piezomagnetic CoFe thin film with a photostrictive BiFeO3 substrate that undergoes light-induced strain. The magnitude of the resistance and magnetoresistance in the CoFe film can be controlled by the wavelength of the incident light on the BiFeO3. Moreover, a light-induced decrease in anisotropic magnetoresistance is detected due to an additional magnetoelastic contribution to magnetic anisotropy of the CoFe film. This effect may find applications in photo-sensing systems, wavelength detectors and can possibly open a research development in light-controlled magnetic switching properties for next generation magnetoresistive memory devices., Comment: 5 pages, 4 figures, journal paper

In electrically polar solids optomechanical effects result from the combination of two main processes, electric field-induced strain and photon-induced voltages. Whereas the former depends on the electrostrictive ability of the sample to convert electric energy into mechanical energy, the latter is caused by the capacity of photons with appropriate energy to generate charges and, therefore, can depend on wavelength.We report here on mechanical deformation of BiFeO3 and its response time to discrete wavelengths of incident light ranging from 365 to 940 nm. The mechanical response of BiFeO3 is found to have two maxima in near-UV and green spectral wavelength regions., Comment: Photostriction in BFO, 4 pages, 5 figures, Phys. Rev. B. 85, 092301 (2012)

With Planck and Herschel, we now have the spectral coverage and angular resolution required to observe dense and cold molecular clouds. As these clouds are optically thick at short wavelength but optically thin at long wavelength, it is tricky to conclude anything about dust properties without a proper treatment of the radiative transfer (RT). Our aim is to disentangle the effects of RT and of dust properties on the variations in the dust emission to provide observers with keys to analyse the emission arising from dense clouds. We model cylindrical clouds, illuminated by the ISRF, and carry out full RT calculations. Dust temperatures are solved using DustEM for amorphous carbons and silicates, grains coated with carbon mantles, and mixed aggregates of carbon and silicate. We allow variations of the grain optical properties with wavelength and temperature. We determine observed colour temperatures, T, and emissivity spectral indices, beta, by fitting the dust emission with modified blackbodies, to compare our models with observations. RT effects can neither explain the low T nor the increased submm emissivity measured at the centre of dense clouds, nor the observed beta-T anti-correlation. Adding noise to the modelled data, we show that it is not likely to be the unique explanation for the beta-T anti-correlation observed in starless clouds. It may be explained by intrinsic variations in the grain optical properties with temperature. As for the increased submm emissivity and the low T, they have to originate in variations in the grain optical properties, probably caused by their growth to form porous aggregates. We find it difficult to track back the nature of grains from the spectral variations in their emission. Finally, the column density is underestimated when determined with blackbody fitting because of the discrepancy between T and the true dust temperature at the cloud centre., Comment: accepted for publication by A&A, abstract modified to match arXiv format, version 2 => correction of numerical values throughout the text/figures

We present the results of the characterization of Mg/Co periodic multilayers and their thermal stability for the EUV range. The annealing study is performed up to a temperature of 400\degree C. Images obtained by scanning transmission electron microscopy and electron energy loss spectroscopy clearly show the good quality of the multilayer structure. The measurements of the EUV reflectivity around 25 nm (~49 eV) indicate that the reflectivity decreases when the annealing temperature increases above 300\degreeC. X-ray emission spectroscopy is performed to determine the chemical state of the Mg atoms within the Mg/Co multilayer. Nuclear magnetic resonance used to determine the chemical state of the Co atoms and scanning electron microscopy images of cross sections of the Mg/Co multilayers reveal changes in the morphology of the stack from an annealing temperature of 305\degreee;C. This explains the observed reflectivity loss., Comment: Published in Applied Physics A: Materials Science \& Processing Published at http://www.springerlink.com.chimie.gate.inist.fr/content/6v396j6m56771r61/ 21 pages

Past and recent observations have revealed unexpected variations in the FIR-mm dust emissivity. In the Herschel spectral range, those are often referred to as a 500{\mu}m emission excess. Several dust emission models have been developed to interpret astrophysical data in the FIR-mm domain. However, these are commonly unable to fully reconcile theoretical predictions with observations. In contrast, the recently revised two level system (TLS) model seems to provide a promising way of interpreting the existing data. The newly available Herschel Hi-GAL data which covers most of the inner Milky-Way offers a unique opportunity to investigate possible variations in the dust emission properties both with wavelength and environment. By combining the IRIS 100 {\mu}m with the Hi-GAL 160, 250, 350 and 500 {\mu}m data, we model the dust emission spectra in each pixel of the Hi-GAL maps, using both the TLS model and, for comparison, a single modified black-body fit. The effect of temperature mixing along the line of sight is investigated. We find a slight decrease in the dust temperature with distance from the Galactic center. We also report the detection of a significant 500 {\mu}m emissivity excess in the peripheral regions of the plane (35\circ<|l|<70\circ) of about 13-15% of the emissivity, that can reach up to 20% in some HII regions. We present the spatial distribution of the best-fit values for the two main parameters of the TLS model, i.e. the charge correlation length, lc, used to characterize the disordered charge distribution (DCD) part of the model, and the amplitude A of the TLS processes, with respect to the DCD effect. They highlight the plausible existence of an overall gradient with distance to the Galactic center. A comparison with previous findings in the solar neighborhood shows that the local value of the excess is less than expected from the Galactic gradient observed here., Comment: Accepted for publication in A&A; 12 pages, 10 figures, 1 table

Cold dust grains emission in the FIR/submm is usually expressed as a modified black body law in which the dust mass absorption coefficient (MAC), is described with a temperature- and wavelength-independent emissivity spectral index, beta. However, numerous data from space and balloon-born missions and recently from Herschel and Planck show that dust emission is not well understood, as revealed by the observed anti-correlation of beta with the grain temperature. In order to give astronomers the necessary data to interpret FIR/submm observations, we synthesised analogues of interstellar amorphous and crystalline silicate grains, rich in Mg and Ca, and having stiochiometry of olivine and pyroxene and measured their MAC, in the 100-1000/1500 \mum range for grain temperatures varying from 300 to 10 K. We find that the grain MAC decreases when the grain temperature decreases and that the local spectral index, beta, defined as the slope of the MAC curve, is anti-correlated with the grain temperature. These variations, which are not observed in the crystallised samples, are related to the amorphous nature of the samples. In addition, the spectral shape of the MAC is complex: at short wavelengths (lambda < 500/700 \mum), beta is in the range 1.6 - 2.1 for all grain temperature and grain composition whereas at longer wavelengths (lambda > 500/700 \mum), beta < 2 for samples with a pyroxene stoichiometry and beta > 2 for samples with an olivine stoichiometry. Hence, the simplifying asymptotic expression based on a single temperature- and wavelength-independent spectral index used by astronomers is not appropriate to describe the dust MAC and thus the dust emission, and may induce significant errors on the derived parameters such as the dust mass and the dust physical and chemical properties. Instead, dust emission models should use the dust MAC as a function of wavelength and temperature.

In a previous paper we proposed a new model for the emission by amorphous astronomical dust grains, based on solid-state physics. The model uses a description of the Disordered Charge Distribution (DCD) combined with the presence of Two-Level Systems (TLS) defects in the amorphous solid composing the grains. The goal of this paper is to confront this new model to astronomical observations of different Galactic environments in the FIR/submm, in order to derive a set of canonical model parameters to be used as a Galactic reference to be compared to in future Galactic and extragalactic studies. We confront the TLS model with existing astronomical data. We consider the average emission spectrum at high latitudes in our Galaxy as measured with FIRAS and WMAP, as well as the emission from Galactic compact sources observed with Archeops, for which an inverse relationship between the dust temperature and the emissivity spectral index has been evidenced. We show that, unlike models previously proposed which often invoke two dust components at different temperatures, the TLS model successfully reproduces both the shape of the Galactic SED and its evolution with temperature as observed in the Archeops data. The best TLS model parameters indicate a charge coherence length of \simeq 13 nm and other model parameters in broad agreement with expectations from laboratory studies of dust analogs. We conclude that the millimeter excess emission, which is often attributed to the presence of very cold dust in the diffuse ISM, is likely caused solely by TLS emission in disordered amorphous dust grains. We discuss the implications of the new model, in terms of mass determinations from millimeter continuum observations and the expected variations of the emissivity spectral index with wavelength and dust temperature. The implications for the analysis of the Herschel and Planck satellite data are discussed., Comment: Accepted for publication in A&A (16 pages, 9 figures, 6 tables)

(abridged) We perform a detailed investigation of sources from the Cold Cores Catalogue of Planck Objects (C3PO). Our goal is to probe the reliability of the detections, validate the separation between warm and cold dust emission components, provide the first glimpse at the nature, internal morphology and physical characterictics of the Planck-detected sources. We focus on a sub-sample of ten sources from the C3PO list, selected to sample different environments, from high latitude cirrus to nearby (150pc) and remote (2kpc) molecular complexes. We present Planck surface brightness maps and derive the dust temperature, emissivity spectral index, and column densities of the fields. With the help of higher resolution Herschel and AKARI continuum observations and molecular line data, we investigate the morphology of the sources and the properties of the substructures at scales below the Planck beam size., Comment: This paper is part of a package of papers describing first results of the Planck mission, to be published together in a special issue of A&A. Corresponding author: Isabelle.Ristorcelli@cesr.fr. Full resolution version available from http://www.sciops.esa.int/index.php?project=PLANCK&page=Planck_Published_Papers

Dust properties appear to vary according to the environment in which the dust evolves. Previous observational indications of these variations in the FIR and submm spectral range are scarce and limited to specific regions of the sky. To determine whether these results can be generalised to larger scales, we study the evolution in dust emissivities from the FIR to mm wavelengths, in the atomic and molecular ISM, along the Galactic plane towards the outer Galaxy. We correlate the dust FIR to mm emission with the HI and CO emission. The study is carried out using the DIRBE data from 100 to 240 mic, the Archeops data from 550 mic to 2.1 mm, and the WMAP data at 3.2 mm (W band), in regions with Galactic latitude |b| < 30 deg, over the Galactic longitude range (75 deg < l < 198 deg) observed with Archeops. In all regions studied, the emissivity spectra in both the atomic and molecular phases are steeper in the FIR (beta = 2.4) than in the submm and mm (beta = 1.5). We find significant variations in the spectral shape of the dust emissivity as a function of the dust temperature in the molecular phase. Regions of similar dust temperature in the molecular and atomic gas exhibit similar emissivity spectra. Regions where the dust is significantly colder in the molecular phase show a significant increase in emissivity for the range 100 - 550 mic. This result supports the hypothesis of grain coagulation in these regions, confirming results obtained over small fractions of the sky in previous studies and allowing us to expand these results to the cold molecular environments in general of the outer MW. We note that it is the first time that these effects have been demonstrated by direct measurement of the emissivity, while previous studies were based only on thermal arguments., Comment: 16 pages, 6 figures, accepted in A&A

We propose a new description of astronomical dust emission in the spectral region from the Far-Infrared to millimeter wavelengths. Unlike previous classical models, this description explicitly incorporates the effect of the disordered internal structure of amorphous dust grains. The model is based on results from solid state physics, used to interpret laboratory data. The model takes into account the effect of absorption by Disordered Charge Distribution, as well as the effect of absorption by localized Two Level Systems. We review constraints on the various free parameters of the model from theory and laboratory experimental data. We show that, for realistic values of the free parameters, the shape of the emission spectrum will exhibit very broad structures which shape will change with the temperature of dust grains in a non trivial way. The spectral shape also depends upon the parameters describing the internal structure of the grains. This opens new perspectives as to identifying the nature of astronomical dust from the observed shape of the FIR/mm emission spectrum. A companion paper will provide an explicit comparison of the model with astronomical data., Comment: accepted in A&A, 21 pages, 9 figures

We present a compilation of PRONAOS-based results concerning the temperature dependence of the dust submillimeter spectral index, including data from Galactic cirrus, star-forming regions, dust associated to a young stellar object, and a spiral galaxy. We observe large variations of the spectral index (from 0.8 to 2.4) in a wide range of temperatures (11 to 80 K). These spectral index variations follow a hyperbolic-shaped function of the temperature, high spectral indices (1.6-2.4) being observed in cold regions (11-20 K) while low indices (0.8-1.6) are observed in warm regions (35-80 K). Three distinct effects may play a role in this temperature dependence: one is that the grain sizes change in dense environments, another is that the chemical composition of the grains is not the same in different environments, a third one is that there is an intrinsic dependence of the dust spectral index on the temperature due to quantum processes. This last effect is backed up by laboratory measurements and could be the dominant one. We also briefly present a joint analysis of WMAP dust data together with COBE/DIRBE and COBE/FIRAS data., Comment: 4 pages, 2 figures, contribution to the proceedings of the Cologne-Bonn-Zermatt conference, held in Zermatt, Switzerland, Sept. 2003, eds: S. Pfalzner, C. Kramer, C. Straubmeier, and A. Heithausen, Springer-Verlag

We present here a compilation of PRONAOS-based results concerning the temperature dependence of the dust submillimeter spectral index, including data from Galactic cirrus, star-forming regions and a circumstellar envelope. We observe large variations of the spectral index (from 0.8 to 2.4) in a wide range of temperatures (12 to 80 K). These spectral index variations follow a hyperbolic-shaped function of the temperature, large spectral indices (1.5-2.4) being observed in cold regions (12-20 K) while small indices (0.8-1.6) are observed in warm regions (35-80 K). Three interpretations are proposed: one is that the grain sizes change in warm and rather dense environments, another is that the chemical composition of the grains is not the same in different environments, a third one is that there is an intrinsic dependence of the dust spectral index on the temperature due to quantum processes., Comment: 2 pages, 1 figure, proc. of the SF2A conf. held in Bordeaux, France, June 2003, eds.: F. Combes, D. Barret and T. Contini, EdP-Sciences Conf. Series, p. 97

We present results obtained with the PRONAOS balloon-borne experiment on interstellar dust. In particular, the submillimeter / millimeter spectral index is found to vary between roughly 1 and 2.5 on small scales (3.5' resolution). This could have implications for component separation in Cosmic Microwave Background maps., Comment: 4 pages, 1 figure, proceeding of the Multi-Wavelength Cosmology conference held in Mykonos, Greece, June 2003, ed. Kluwer

We map a 50' x 30' area in and around the M17 molecular complex with the French submillimeter balloon-borne telescope PRONAOS, in order to better understand the thermal emission of cosmic dust and the structure of the interstellar medium. The PRONAOS-SPM instrument has an angular resolution of about 3', corresponding to a size of 2 pc at the distance of this complex, and a high sensitivity up to 0.8 MJy/sr. The observations are made in four wide submillimeter bands corresponding to effective wavelengths of 200, 260, 360 and 580 um. Using an improved map-making method for PRONAOS data, we map the M17 complex and faint condensations near the dense warm core. We derive maps of both the dust temperature and the spectral index, which vary over a wide range, from about 10 K to 100 K for the temperature and from about 1 to 2.5 for the spectral index. We show that these parameters are anticorrelated, the cold areas (10-20 K) having a spectral index around 2, whereas the warm areas have a spectral index between 1 and 1.5. We discuss possible causes of this effect, and we propose an explanation involving intrinsic variations of the grain properties. Indeed, to match the observed spectra with two dust components having a spectral index equal to 2 leads to very large and unlikely amounts of cold dust. We also give estimates of the column densities and masses of the studied clumps. Three cold clumps (14-17 K) could be gravitationally unstable., Comment: 16 pages, 4 figures, accepted June 2002 in Astronomy & Astrophysics

We present here the continuum submillimeter maps of the molecular cloud around the M42 Nebula in the Orion region. These have been obtained in four wavelength bands (200, 260, 360 and 580 microns) with the ProNaOS two meter balloon-borne telescope. The area covered is 7 parsecs wide (50 arcmin at a distance of 470 pc) with a spatial resolution of about 0.4 parsec. Thanks to the high sensitivity to faint surface brightness gradients, we have found several cold condensations with temperatures ranging from 12 to 17 K, within 3 parsecs of the dense ridge. The statistical analysis of the temperature and spectral index spatial distribution shows an evidence of an inverse correlation between these two parameters. Being invisible in the IRAS 100 micron survey, some cold clouds are likely to be the seeds for future star formation activity going on in the complex. We estimate their masses and we show that two of them have masses higher than their Jeans masses, and may be gravitationally unstable., Comment: 4 figures, The Astrophysical Journal, Main Journal, in press