Search

This study emphasizes the synthesis of nickel oxide (NiOx + C) nanoparticles with varied graphite (C) proportions (1%, 2.5%, 5%, 7.5%, and 10%) using Aloe-Vera natural extract as a green reducing agent. Prepared NiOx + C nanostructures exhibited consistent X-ray diffraction patterns with no additional C peak, signifying enhanced interlayer spacing. The crystalline size (Dp) decreased from 27 nm to 20 nm with an increase in the amount of carbon (C). The determined bandgap (Eg) was 2 eV higher than bulk material due to formation extra energy level at defect sites. The shoulder peak at 1620 cm−1 agrees with the disorder-induced band from C and second-order bands of C at about 2700 cm−1 for NiOx + C. FESEM images confirm the hexagonal morphology. Not much particle aggregation was observed except for 10% C content. The selected area electron diffraction (SAED) confirms the existence of NiOx crystalline orientations including planes (111), (200), (220), (311), and (222).

Objectives: The study aimed to detect Neospora caninum by nested PCR (nPCR) in aborted fetuses of cattle, sheep, and goats in Bangladesh. Materials and Methods: The head portion of each aborted fetus (111) was dissected at each sampling site and transferred to the laboratory in an ice box. Data on risk factors associated with N. caninum infection were simultaneously collected. Deoxyribonucleic acid was extracted from brain tissue to perform nPCR targeting the internal transcribed spacer 1 (ITS1) ribosomal DNA (rDNA) gene of N. caninum and sequencing was performed from the representative positive samples. Results: By nPCR, N. caninum was found in 16.0% of aborted fetuses of cattle, followed by sheep (14.81%) and goats (11.78%). The highest prevalence was found in aborted fetuses of animals during the second trimester (27.78%) of pregnancy aged 2 to 4 years (18.75%). Obtained sequences showed they were completely matched with N. caninum ITS1 rDNA gene deposited in GenBank. Univariate analysis demonstrated that pregnancy stages (trimesters), abortion history of the animals, and access to dogs in animal farms were significantly (p ≤ 0.05) correlated with N. caninum infection. Conclusion: This study represents the first investigation into the molecular detection, phylogenetic characterization, and analysis of risk factors associated with N. caninum in livestock in Bangladesh. According to the research findings, N. caninum infection may have a role in abortion cases and the ensuing financial losses in the nation's livestock industry. [J Adv Vet Anim Res 2024; 11(3.000): 618-626]

This work includes the numerical modeling (NM) of solar cells consisting of the active layer of CH3NH3SnI3 and electron transport layer of CdS, by employing a software SCAPS-1D. Organic-inorganic lead-based perovskites are superior in terms of power conversion efficiency. However, there are some serious drawbacks associated with them including poor stability, shorter life time and toxicity. Therefore, it is the demand of the hour to explore alternative materials to overcome these shortcomings. In this regard, tin is a competitive alternative to lead because it has similar electronic and chemical properties. Moreover, it is nontoxic, making it environmentally friendly. However, Sn based perovskite devices are reported with inferior power conversion efficacy, to date. In the present work, we have worked on a novel architecture of solar cells containing CH3NH3SnI3 as a light absorber layer and CdS as electron fetching layer. Optimization of the device was performed numerically by varying physical parameters related to the active layer such as thickness, defect density and shallow acceptor concentration. The proposed architecture of solar cells was proved as an efficient system with Jsc of 33.40 mA/cm2, Voc of 0.878 V, FF of 85.25 %, and PCE of 25.02 %. The temperature analysis has revealed that, temperature higher than 300 K increases the reverse saturation current, seriously degrading the structure of the device, hence limiting the power conversion performance of the solar cell. Furthermore, a rear electrode made of the high work function materials like Pt forms an ohmic junction at the HTL/anode interface, enhancing the performance of the device. Results of this study have paved the way for experimentalists to explore opportunities, to rationalize this architecture for real time applications such as inhouse lighting and laptop/smartphone charging.

Abstract Background Babesia and Theileria are potential threats to the livestock industry, causing considerable economic losses. These tick‐borne blood parasites are more prevalent in crossbred cattle than local cattle in Bangladesh. Objectives To confirm the species of Babesia and Theileria in crossbred cattle from the northern part of Bangladesh using conventional and molecular tools. Methods A total of 385 crossbred cattle blood samples were subjected to DNA extraction and PCR. For molecular detection, B. bigemina rhoptry‐associated protein 1a, B. bovis spherical body protein‐4, and Theileria spp. 18S rRNA were used as the marker genes. Results Using PCR, only 72 (18.7%) samples were found piroplasm positive, of which 12.2% Theileria, 4.7% Babesia, and 1.8% mixed infections. Both Babesia (7.3%), Theileria (7.7%) and mixed (2.8%) infections were detected in Sirajganj, and only Theileria (20.4%) was detected in Rangpur district. By PCR and nPCR we detected B. bigemina and T. annulata in Sirajganj district, and Theileria sp. in Rangpur district. The target gene sequences of isolated pathogens confirmed B. bigemina and T. annulata, and Theileria sp from these samples. Blood smears of all samples were also examined microscopically for Babesia and/or Theileria spp. and 14.3% of samples were found positive, of which 5.9% Babesia and 8.3% Theileria. Generally, the pathogens detected in Sirajgang and Rangpur were genetically related to South Asia, particularly South East Asian isolates. Conclusions These findings provide information for a better understanding of the epidemiology of Babesia and Theileria as well as to improve the approaches for diagnosis and control of tick‐borne diseases in Bangladesh.

Studies are being carried out on achieving the maximum quality of garlic through various approaches. In Bangladesh, new garlic varieties (BARI 1–4, BAU-1, BAU-2, BAU-5) have been recently developed by artificial selection to enhance their quality. The present study aimed to evaluate their potency in terms of bioactive properties and organosulfur compounds content using different bioassay and GC–MS techniques while comparing them with other accessible varieties (Chinese, Indian, Local). The new variety, BARI-3 showed the highest antioxidant activity and total phenolic content. It was also found with the highest level of a potent blood pressure-lowering agent, 2-vinyl-4H-1,3-dithiine (78.15 %), which is never reported in any garlic at this percentage. However, the local variety exhibited greater inhibitory properties against the tested organisms including multidrug-resistant pathogens compared to other varieties. This study primarily shows the potential of these two kinds of garlic for their further utilization and development.

Abstract Recyclable titanium dioxide (TiO2)-based photocatalytic self-cleaning films (SCFs) having a bilayer structure were prepared and assessed. These SCFs comprised two layers of fibers fabricated using an electrospinning process. The self-cleaning layer was made of acrylonitrile–butadiene–styrene (ABS) fibers with embedded TiO2 while the substrate layer was composed of fibers made by simultaneously electrospinning poly (vinyl alcohol) (PVA) and ABS. This substrate improved the mechanical strength of the SCF and provided greater adhesion due to the presence of the PVA. The experimental results showed that the hydrophobicity (as assessed by the water contact angle), photocatalytic properties and self-cleaning efficiency of the SCF were all enhanced with increasing TiO2 content in the ABS/TiO2 fibers. In addition, the introduction of the substrate layer allowed the SCFs to be applied to various surfaces and then peeled off when desired. The ABS fibers effectively improved the strength of the overall film, while deterioration of the ABS upon exposure to UV light was alleviated by the addition of TiO2. These SCFs can potentially be recycled after use in various environments, and therefore have applications in the fields of environmental protection and medical science.

Abstract The photovoltaic performance of perovskite solar cells (PSCs) can be improved by utilizing efficient front contact. However, it has always been a significant challenge for fabricating high-quality, scalable, controllable, and cost-effective front contact. This study proposes a realistic multi-layer front contact design to realize efficient single-junction PSCs and perovskite/perovskite tandem solar cells (TSCs). As a critical part of the front contact, we prepared a highly compact titanium oxide (TiO2) film by industrially viable Spray Pyrolysis Deposition (SPD), which acts as a potential electron transport layer (ETL) for the fabrication of PSCs. Optimization and reproducibility of the TiO2 ETL were discreetly investigated while fabricating a set of planar PSCs. As the front contact has a significant influence on the optoelectronic properties of PSCs, hence, we investigated the optics and electrical effects of PSCs by three-dimensional (3D) finite-difference time-domain (FDTD) and finite element method (FEM) rigorous simulations. The investigation allows us to compare experimental results with the outcome from simulations. Furthermore, an optimized single-junction PSC is designed to enhance the energy conversion efficiency (ECE) by > 30% compared to the planar reference PSC. Finally, the study has been progressed to the realization of all-perovskite TSC that can reach the ECE, exceeding 30%. Detailed guidance for the completion of high-performance PSCs is provided.

Tungsten oxide (WOx) thin films were synthesized through the RF magnetron sputtering method by varying the sputtering power from 30 W to 80 W. Different investigations have been conducted to evaluate the variation in different morphological, optical, and dielectric properties with the sputtering power and prove the possibility of using WOx in optoelectronic applications. An Energy Dispersive X-ray (EDX), stylus profilometer, and atomic force microscope (AFM) have been used to investigate the dependency of morphological properties on sputtering power. Transmittance, absorbance, and reflectance of the films, investigated by Ultraviolet-Visible (UV-Vis) spectroscopy, have allowed for further determination of some necessary parameters, such as absorption coefficient, penetration depth, optical band energy gap, refractive index, extinction coefficient, dielectric parameters, a few types of loss parameters, etc. Variations in these parameters with the incident light spectrum have been closely analyzed. Some important parameters such as transmittance (above 80%), optical band energy gap (~3.7 eV), and refractive index (~2) ensure that as-grown WOx films can be used in some optoelectronic applications, mainly in photovoltaic research. Furthermore, strong dependencies of all evaluated parameters on the sputtering power were found, which are to be of great use for developing the films with the required properties.

Schistosomiasis is a neglected tropical disease (NTD) caused by blood flukes (Schistosoma spp.). Schistosomatids affect a wide array of vertebrate hosts, including humans. In the present study, multiple species of schistosomatids were identified by isolating schistosomatid cercariae (SC) from naturally infected snails. We also described different biotic and abiotic factors influencing SC infections in snails and reported human cercarial dermatitis (HCD) for the first time in Bangladesh. A total of 22,012 snails of seven species: Lymnaea auricularia, L. luteola, Indoplanorbis exustus, Physa acuta, Viviparus bengalensis, Brotia spp., and Thiara spp., were collected and examined. Among these snails, 581 (2.6%) belonging to five species: L. luteola, L. auricularia, P. acuta, I. exustus, and V. bengalensis, were infected with SC. The rate of infection was the highest for L. luteola (11.1%), followed by L. auricularia (5.3%), and was the lowest for V. bengalensis (0.4%). Prevalence in snails was the highest in September (16.8%), followed by October (9.5%) and November (8.8%), and was the lowest in colder months, such as January (1.8%) and February (2.1%). Infections with schistosomatids were more common in larger snails and snails collected from sunny areas. We confirmed the presence of Schistosoma indicum, S. incognitum, S. nasale, S. spindale, and Trichobilharzia szidati by PCR and sequencing. Through a questionnaire survey, we detected HCD in 214 (53.5%) individuals, and the infection rate was almost equally distributed across all professions. Collectively, the present results suggest that lymnaeid snails are the main vector for Schistosoma spp. prevalent in Bangladesh, and schistosomatids with zoonotic potential are also prevalent.

The fabrication of highly efficient nickel oxide (NiOx) thin film for optoelectronic devices is a challenging task because optoelectronic properties are considerably influenced by deposition technique and film thickness. The effect of thickness on the film properties of electron beam–physical vapour-deposited NiOx thin film has been investigated in this work. The influence of post-annealing treatment on the optoelectronic properties of the film was compared with that of the as-deposited one. Optical transparency gradually decreased upon the successive increment in thickness of the as-deposited and annealed films. The surface roughness of as-deposited films increased linearly with the increase in film thickness, but this behaviour was altered in post-annealed films. Spherical grains with high packing density were observed on the as-deposited films, but the grain size was altered substantially on the post-annealed films. The annealed films presented a higher work function than their corresponding as-deposited films. This work presents important insights into the design of photovoltaic devices with an effective deposition process, including a high material utilisation. Moreover, an attempt of fabricating inverted perovskite solar cell on as-deposited and annealing NiOx film as hole transporting material exhibited power conversion efficiency of 11.98% and 12.28%, individually. It was noticed that the high temperature annealing on NiOx film had a very little impact on the comparative photovoltaic performance of aforementioned PSC devices.

In this study, chromium (Cr)-doped nickel oxide (NiO) thin films were deposited by employing selective lateral doping of Cr in NiO by radio-frequency magnetron sputtering at different doping times ranging from 0 s (undoped) to 80 s. The structural, optical, and electrical properties of the resulting Cr-doped NiO thin films were investigated. Structural investigation from XRD patterns indicated that the grown Cr-doped NiO layer crystallized in a cubic phase. Broadening of the diffraction peak with increasing doping time from 0 s to 80 s led to a reduction in the crystallite size that varied from 23.52 nm to 14.65 nm. Compared with the undoped NiO, the diffraction peak along the (200) plane shifted from left to right as a function of doping time. This result indicated that Cr+3 could easily enter the NiO lattice. Results from the Hall-effect study disclosed that electrical properties of Cr-doped NiO was highly dependent on doping time. The conductivity of NiO was increased with doping time, and the highest conductivity (8.73 × 10−2 Scm−1) was achieved at a doping time of 80 s. Finally, optical investigations revealed that as doping time increased, the optical bandgap of Cr-doped NiO films dropped from 3.43 eV to 3.28 eV. The highest Urbach energy at higher doping time indicated that crystallinity became poorer, and the degree of defects increased with increasing doping time.

An ideal n-i-p perovskite solar cell employing a Pb free CH3NH3SnI3 absorber layer was suggested and modelled. A comparative study for different electron transport materials has been performed for three devices keeping CuO hole transport material (HTL) constant. SCAPS-1D numerical simulator is used to quantify the effects of amphoteric defect based on CH3NH3SnI3 absorber layer and the interface characteristics of both the electron transport layer (ETL) and hole transport layer (HTL). The study demonstrates that amphoteric defects in the absorber layer impact device performance significantly more than interface defects (IDL). The cell performed best at room temperature. Due to a reduction in Voc, PCE decreases with temperature. Defect tolerance limit for IL1 is 1013 cm−3, 1016 cm−3 and 1012 cm−3 for structures 1, 2 and 3 respectively. The defect tolerance limit for IL2 is 1014 cm−3. With the proposed device structure FTO/PCBM/CH3NH3SnI3/CuO shows the maximum efficiency of 25.45% (Voc = 0.97 V, Jsc = 35.19 mA/cm2, FF = 74.38%), for the structure FTO/TiO2/CH3NH3SnI3/CuO the best PCE is obtained 26.92% (Voc = 0.99 V, Jsc = 36.81 mA/cm2, FF = 73.80%) and device structure of FTO/WO3/CH3NH3SnI3/CuO gives the maximum efficiency 24.57% (Voc = 0.90 V, Jsc = 36.73 mA/cm2, FF = 74.93%) under optimum conditions. Compared to others, the FTO/TiO2/CH3NH3SnI3/CuO system provides better performance and better defect tolerance capacity.

Tungsten disulfide (WS2) thin films were deposited on soda-lime glass (SLG) substrates using radio frequency (RF) magnetron sputtering at different Ar flow rates (3 to 7 sccm). The effect of Ar flow rates on the structural, morphology, and electrical properties of the WS2 thin films was investigated thoroughly. Structural analysis exhibited that all the as-grown films showed the highest peak at (101) plane corresponds to rhombohedral phase. The crystalline size of the film ranged from 11.2 to 35.6 nm, while dislocation density ranged from 7.8 × 1014 to 26.29 × 1015 lines/m2. All these findings indicate that as-grown WS2 films are induced with various degrees of defects, which were visible in the FESEM images. FESEM images also identified the distorted crystallographic structure for all the films except the film deposited at 5 sccm of Ar gas flow rate. EDX analysis found that all the films were having a sulfur deficit and suggested that WS2 thin film bears edge defects in its structure. Further, electrical analysis confirms that tailoring of structural defects in WS2 thin film can be possible by the varying Ar gas flow rates. All these findings articulate that Ar gas flow rate is one of the important process parameters in RF magnetron sputtering that could affect the morphology, electrical properties, and structural properties of WS2 thin film. Finally, the simulation study validates the experimental results and encourages the use of WS2 as a buffer layer of CdTe-based solar cells.

Recent achievements, based on lead (Pb) halide perovskites, have prompted comprehensive research on low-cost photovoltaics, in order to avoid the major challenges that arise in this respect: Stability and toxicity. In this study, device modelling of lead (Pb)-free perovskite solar cells has been carried out considering methyl ammonium tin bromide (CH3NH3SnBr3) as perovskite absorber layer. The perovskite structure has been justified theoretically by Goldschmidt tolerance factor and the octahedral factor. Numerical modelling tools were used to investigate the effects of amphoteric defect and interface defect states on the photovoltaic parameters of CH3NH3SnBr3-based perovskite solar cell. The study identifies the density of defect tolerance in the absorber layer, and that both the interfaces are 1015 cm−3, and 1014 cm−3, respectively. Furthermore, the simulation evaluates the influences of metal work function, uniform donor density in the electron transport layer and the impact of series resistance on the photovoltaic parameters of proposed n-TiO2/i-CH3NH3SnBr3/p-NiO solar cell. Considering all the optimization parameters, CH3NH3SnBr3-based perovskite solar cell exhibits the highest efficiency of 21.66% with the Voc of 0.80 V, Jsc of 31.88 mA/cm2 and Fill Factor of 84.89%. These results divulge the development of environmentally friendly methyl ammonium tin bromide perovskite solar cell.

The most frequently used n-type electron transport layer (ETL) in high-efficiency perovskite solar cells (PSCs) is based on titanium oxide (TiO2) films, involving a high-temperature sintering (>450 °C) process. In this work, a dense, uniform, and pinhole-free compact titanium dioxide (TiOx) film was prepared via a facile chemical bath deposition process at a low temperature (80 °C), and was applied as a high-quality ETL for efficient planar PSCs. We tested and compared as-deposited substrates sintered at low temperatures (< 150 °C) and high temperatures (> 450 °C), as well as their corresponding photovoltaic properties. PSCs with a high-temperature treated TiO2 compact layer (CL) exhibited power conversion efficiencies (PCEs) as high as 15.50%, which was close to those of PSCs with low-temperature treated TiOx (14.51%). This indicates that low-temperature treated TiOx can be a potential ETL candidate for planar PSCs. In summary, this work reports on the fabrication of low-temperature processed PSCs, and can be of interest for the design and fabrication of future low-cost and flexible solar modules.

Aim: The present epidemiological investigation was carried out to investigate the status of pigeon haemosporidian parasites in two districts (Mymensingh and Rangpur), Bangladesh. Materials and Methods: In total, 300 blood samples of pigeons were examined from January to November, 2016. Blood samples were collected from wing vein and thin smears were prepared from them. All smears were stained with Giemsa stain and examined under microscope. Results: The overall prevalence of haemosporidian parasites was 28% (84 /300) in pigeons. Of those, 22.3% (67/300) of birds were infected with Haemoproteus spp., 5.7% with Plasmodium spp. (17/300) and 2.7% with both genera (8/300). The prevalence rate was insignificantly (p = 0.050) higher in Mymensingh (34.7%) than in Rangpur (24.2%). Male were more susceptible (30.8%) than female (25.3%). Adults (29.5%) were more prone to infectione than young (19.6 %). The prevalence was significantly (p = 0.000) higher in the rainy season (56.1%) followed by summer (33.8%) and winter (10.0%).Conclusion: From this study, it was ascertained that avian malaria in pigeons was prevalent in Bangladesh. Therefore, further investigations with a larger sample size and molecular characterization of avian malaria species in pigeons of Bangladesh is warranted.