Search

In tanneries, limed fleshing is an unavoidable waste generated in beamhouse operation. Proper management of limed fleshing with protein, fat, lime, and sulfide will help to protect the natural environment and at least reduce the pollution that ends up in it. In this study, excluding any pretreatment, limed fleshing is used for compost production. Chopped and mixed limed fleshing with chicken manure, cow dung, and sawdust was heaped onto a horizontal bamboo frame. Three composting heaps were fabricated weighing 720, 700, and 760 kg. The turning of composting materials in the heaps causes temperature changes in the thermophilic range. The thermophilic temperatures in these heaps were 69.07 °C (heap 1), 69.9 °C (heap 2), and 69.19 °C (heap 3) which ensured the death of the pathogenic organism. The quality of compost was assessed based on the nutrients-nitrogen (N), phosphorous (P), potassium (K), and sulfur (S) content. NPKS in the compost fulfils the requirements of the investigated materials as compost. The largest amounts of metals- zinc (Zn), copper (Cu), chromium (Cr), lead (Pb), and nickel (Ni) of the compost detected in the heaps were, respectively, 200.3, 37.4, 20.3, 12.0, and 3.9 mg/kg. Cadmium (Cd) in the compost was below the detection limit. Scanning electron microscope (SEM) photographs show the decomposing of composting materials. This study indicates that limed fleshing can be converted into nutrient-enriched compost without any pretreatment. Using an easy, simple, and adaptable technique could reduce the volume of solid waste generated in the tannery to reduce environmental pollution.

In tannery at beamhouse, hair burning liming wastewater is the most toxic substance, which has adverse impact on the environment. Treatment of hair burning liming wastewater begets substantial amount of solid waste termed as ‘sludge’. In this investigation, in-situ prepared liming sludge from hair burning liming wastewater is used for compost processing. The liming sludge is mixed with sawdust, cow dung, and chicken manure; piled onto a horizontal bamboo aerator. Three compost piles were built up weighing 650, 690, and 630 Kg. Drastic changes were observed in temperature due to the revolving of the piles. The highest temperature generated in the piles were in the thermophilic range at 59.69°C, 64.41°C, and 63.36°C respectively, ensures the destruction of pathogenic microorganism. The heavy metals Zn, Cu, Cr, Ni, Cd, and Pb of the compost were analyzed and the highest amounts found among the piles were 152.64, 21.20, 21.02, 6.93, 5.78, and 3.30 mg/kg, correspondingly. Moreover, the nutrient nitrogen, phosphorous, potassium, sulfur of the compost fulfills the requirement of the investigated material as compost. SEM analysis indicates the degradation of the composting materials. This study reveals that without any pretreatment, the generated tannery liming sludge can be transformed into a value-added product with the use of a zero-waste approach.

At various locations around the world, environments are now becoming greatly polluted by heavy metals, while damage is being done to soil and aquatic life with serious implications for humanity as well. Once heavy metals enter the ecosystem, they persist for a long time, and they are very difficult to eliminate. Discharging of industrial wastes enriched with heavy metals substantially pollutes the soil, water, and air. This study investigated the levels of heavy metals around the industrial area of Brahmanbaria, which is located in Chittagong Division, Bangladesh. Samples of soil, wastewater, vegetable, and grass were collected from the industrial area. The heavy metals were quantified using atomic absorption spectroscopy. The heavy metals found in soil were chromium (Cr) 8.2-18.8, lead (Pb) 3.5-18.3, copper (Cu) 4.6-10.8, zinc (Zn) 48.5-273.4, nickel (Ni) 10.06-26.9, and cadmium (Cd) 0.2 mg/kg, respectively. The metal contents in the wastewater were Cr 0.03-0.5, Pb 0.01-0.05, Cu 0.01-0.02, Zn 0.6-11.2, Ni 0.03-0.14, and Cd 0.003 mg/L, respectively. The metal contents in vegetable and grass were Cr 81.5-247.8, Pb 10.3-34.1, Cu 5.5-6.3, Zn 419.8-435.3, and Ni 8.7-15.5 mg/kg, respectively. The amount of metal in the soil, wastewater, and vegetables and grass followed the sequences: Zn Cr Ni Pb Cu Cd, Zn Cr Ni Pb Cu Cd, and Zn Cr Pb Ni Cu, respectively. Compared to the WHO guidelines, the soil in the study area was not polluted with Pb, Cu, and Cd but was moderately polluted with Cr, Zn, and Ni. Continual accumulation of metals in the soil, vegetables and grass could pose a serious risk to the environment as well as many life forms.