Search

A major limitation in the development of mucosal drug delivery systems is the design of in vitro models that accurately reflect in vivo conditions. Traditionally, models seek to mimic characteristics of physiological mucus, often focusing on property-specific trial metrics such as rheological behavior or diffusion of a nanoparticle of interest. Despite the success of these models, translation from in vitro results to in vivo trials is limited. As a result, several authors have called for work to develop standardized testing methodologies and characterize the influence of model properties on drug delivery performance. To this end, a series of trials is performed on 12 mucomimetic hydrogels reproduced from literature. Experiments show that there is no consistent correlation between barrier performance and rheological or microstructural properties of the tested mucomimetic hydrogels. In addition, the permeability of both mucopenetrating and mucoadhesive nanoparticles is assessed, revealing non-obvious variations in barrier properties such as the relative contributions of electrostatic and hydrophobic interactions in different models. These results demonstrate the limitations of predicting mucomimetic behavior with common characterization techniques and highlight the importance of testing barrier performance with multiple nanoparticle formulations., (© 2024 Wiley‐VCH GmbH.)

Understanding the highly complex tumor-immune landscape is an important goal for developing novel immune therapies for solid cancers. To this end, 3D cancer-immune models have emerged as patient-relevant in vitro tools for modeling the tumor-immune landscape and the cellular interactions within it. In this review, we provide an overview of the components and applications of 3D cancer-immune models and discuss their evolution from 2015 to 2023. Specifically, we observe trends in primary cell-sourced, T cell-based complex models used for therapy evaluation and biological discovery. Finally, we describe the challenges of implementing 3D cancer-immune models and the opportunities for maximizing their potential for deciphering the complex tumor-immune microenvironment and identifying novel, clinically relevant drug targets., Competing Interests: Declaration of interests The authors have no interests to declare., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Rapid advances in tissue engineering have resulted in more complex and physiologically relevant 3D in vitro tissue models with applications in fundamental biology and therapeutic development. However, the complexity provided by these models is often not leveraged fully due to the reductionist methods used to analyze them. Computational and mathematical models developed in the field of systems biology can address this issue. Yet, traditional systems biology has been mostly applied to simpler in vitro models with little physiological relevance and limited cellular complexity. Therefore, integrating these two inherently interdisciplinary fields can result in new insights and move both disciplines forward. In this review, we provide a systematic overview of how systems biology has been integrated with 3D in vitro tissue models and discuss key application areas where the synergies between both fields have led to important advances with potential translational impact. We then outline key directions for future research and discuss a framework for further integration between fields., Competing Interests: The authors have no conflicts to disclose., (© 2024 Author(s).)

Mass cytometry permits the high dimensional analysis of complex biological samples; however, some techniques are not yet integrated into the mass cytometry workflow due to reagent availability. The use of self-labeling protein systems, such as HaloTag, are one such application. Here, we describe the design and implementation of the first mass cytometry ligands for use with HaloTag. "Click"-amenable HaloTag warheads were first conjugated onto poly(l-lysine) or poly(acrylic acid) polymers that were then functionalized with diethylenetriaminepentaacetic acid (DTPA) lutetium metal chelates. Kinetic analysis of the HaloTag labeling rates demonstrated that the structure appended to the 1-chlorohexyl warhead was key to success. A construct with a diethylene glycol spacer appended to a benzamide gave similar rates ( k obs ∼ 10 2 M -1 s -1 ), regardless of the nature of the polymer. Comparison of the polymer with a small molecule chelate having rapid HaloTag labeling kinetics ( k obs ∼ 10 4 M -1 s -1 ) suggests the polymers significantly reduced the HaloTag labeling rate. HEK293T cells expressing surface-exposed GFP-HaloTag fusions were labeled with the polymeric constructs and 175 Lu content measured by cytometry by time-of-flight (CyTOF). Robust labeling was observed; however, significant nonspecific binding of the constructs to cells was also present. Heavily pegylated polymers demonstrated that nonspecific binding could be reduced to allow cells bearing the HaloTag protein to be distinguished from nonexpressing cells.

Background: Functional evaluation of molecules that are predicted to promote stem cell mediated endogenous repair often requires in vivo transplant studies that are low throughput and hinder the rate of discovery. To offer greater throughput for functional validation studies, we miniaturized, simplified and expanded the functionality of a previously developed muscle endogenous repair (MEndR) in vitro assay that was shown to capture significant events of in vivo muscle endogenous repair., Methods: The mini-MEndR assay consists of miniaturized cellulose scaffolds designed to fit in 96-well plates, the pores of which are infiltrated with human myoblasts encapsulated in a fibrin-based hydrogel to form engineered skeletal muscle tissues. Pre-adsorbing thrombin to the cellulose scaffolds facilitates in situ tissue polymerization, a critical modification that enables new users to rapidly acquire assay expertise. Following the generation of the 3D myotube template, muscle stem cells (MuSCs), enriched from digested mouse skeletal muscle tissue using an improved magnetic-activated cell sorting protocol, are engrafted within the engineered template. Murine MuSCs are fluorescently labeled, enabling co-evaluation of human and mouse Pax7 + cell responses to drug treatments. A regenerative milieu is introduced by injuring the muscle tissue with a myotoxin to initiate endogenous repair "in a dish". Phenotypic data is collected at endpoints with a high-content imaging system and is analyzed using ImageJ-based image analysis pipelines., Results: The miniaturized format and modified manufacturing protocol cuts reagent costs in half and hands-on seeding time ~ threefold, while the image analysis pipelines save 40 h of labour. By evaluating multiple commercially available human primary myoblast lines in 2D and 3D culture, we establish quality assurance metrics for cell line selection that standardizes myotube template quality. In vivo outcomes (enhanced muscle production and Pax7 + cell expansion) to a known modulator of MuSC mediated repair (p38/β MAPK inhibition) are recapitulated in the miniaturized culture assay, but only in the presence of stem cells and the regenerative milieu., Discussion: The miniaturized predictive assay offers a simple, scaled platform to co-investigate human and mouse skeletal muscle endogenous repair molecular modulators, and thus is a promising strategy to accelerate the muscle endogenous repair discovery pipeline., Supplementary Information: The online version contains supplementary material available at 10.1186/s44330-024-00005-4., Competing Interests: Competing interestsThe authors declare no competing interests., (© The Author(s) 2024.)

Aldehydes are attractive bioorthogonal coupling partners. The ease of manipulation of aldehydes and their orthogonality to other classes of bioorthogonal reactions have inspired the exploration of chemistries, which generate irreversible conjugates. Similarly, nitrones have been shown to be potent 1,3-dipoles in bioorthogonal reactions when paired with strained alkynes. Here, we combine the reactivity of nitrones with the simplicity of aldehydes using an N -allylglyoxylamide, in a cascade reaction with an N -alkylhydroxylamine to produce a bicyclic isoxazolidine. The reaction is found to be catalyzed by 5-methoxyanthranilic acid and proceeds at pH 7 with favorable kinetics. Using the HaloTag7 protein bearing an N -alkylhydroxylamine, we show the reaction to be bioorthogonal in a complex cell lysate and to proceed well at the surface of a HEK293 cell. Furthermore, the reaction is compatible with a typical strain-promoted alkyne-azide click reaction. The characteristics of this reaction suggest it will be a useful addition to the pallet of bioorthogonal reactions that have revolutionized chemical biology.

Cancer-associated fibroblasts (CAFs) play a pivotal role in cancer progression, including mediating tumour cell invasion via their pro-invasive secretory profile and ability to remodel the extracellular matrix (ECM). Given that reduced CAF abundance in tumours correlates with improved outcomes in various cancers, we set out to identify epigenetic targets involved in CAF activation in regions of tumour-stromal mixing with the goal of reducing tumour aggressiveness. Using the GLAnCE (Gels for Live Analysis of Compartmentalized Environments) platform, we performed an image-based, phenotypic screen that enabled us to identify modulators of CAF abundance and the capacity of CAFs to induce tumour cell invasion. We identified EHMT2 (also known as G9a), an enzyme that targets the methylation of histone 3 lysine 9 (H3K9), as a potent modulator of CAF abundance and CAF-mediated tumour cell invasion. Transcriptomic and functional analysis of EHMT2-inhibited CAFs revealed EHMT2 participated in driving CAFs towards a pro-invasive phenotype and mediated CAF hyperproliferation, a feature typically associated with activated fibroblasts in tumours. Our study suggests that EHMT2 regulates CAF state within the tumour microenvironment by impacting CAF activation, as well as by magnifying the pro-invasive effects of these activated CAFs on tumour cell invasion through promoting CAF hyperproliferation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Modeling the heterogeneity of the tumor microenvironment (TME) in vitro is essential to investigating fundamental cancer biology and developing novel treatment strategies that holistically address the factors affecting tumor progression and therapeutic response. Thus, the development of new tools for both in vitro modeling, such as patient-derived organoids (PDOs) and complex 3D in vitro models, and single cell omics analysis, such as single-cell RNA-sequencing, represents a new frontier for investigating tumor heterogeneity. Specifically, the integration of PDO-based 3D in vitro models and single cell analysis offers a unique opportunity to explore the intersecting effects of interpatient, microenvironmental, and tumor cell heterogeneity on cell phenotypes in the TME. In this review, the current use of PDOs in complex 3D in vitro models of the TME is discussed and the emerging directions in the development of these models are highlighted. Next, work that has successfully applied single cell analysis to PDO-based models is examined and important experimental considerations are identified for this approach. Finally, open questions are highlighted that may be amenable to exploration using the integration of PDO-based models and single cell analysis. Ultimately, such investigations may facilitate the identification of novel therapeutic targets for cancer that address the significant influence of tumor-TME interactions., (© 2023 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH.)

Patient-derived organoids have emerged as a useful tool to model tumour heterogeneity. Scaling these complex culture models while enabling stratified analysis of different cellular sub-populations, however, remains a challenge. One strategy to enable higher throughput organoid cultures is the scaffold-supported platform for organoid-based tissues (SPOT). SPOT allows the generation of flat, thin, and dimensionally-defined microtissues in both 96- and 384-well plate footprints that are compatible with longitudinal image-based readouts. SPOT is currently manufactured manually, however, limiting scalability. In this study, an automation approach to engineer tumour-mimetic 3D microtissues in SPOT using a liquid handler is optimized and comparable within- and between-sample variation to standard manual manufacturing is shown. Further, a liquid handler-supported cell extraction protocol to support single-cell-based end-point analysis using high-throughput flow cytometry and multiplexed cytometry by time of flight is developed. As a proof-of-value demonstration, 3D complex tissues containing different proportions of tumour and stromal cells are generated to probe the reciprocal impact of co-culture. It is also demonstrated that primary patient-derived organoids can be incorporated into the pipeline to capture patient-level tumour heterogeneity. It is envisioned that this automated 96/384-SPOT workflow will provide opportunities for future applications in high-throughput screening for novel personalized therapeutic targets., (© 2023 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH.)

The spatial configuration of cells in the tumor microenvironment (TME) affects both cancer and fibroblast cell phenotypes contributing to the clinical challenge of tumor heterogeneity and therapeutic resistance. This is a particular challenge in stroma-rich pancreatic ductal adenocarcinoma (PDAC). Here, a versatile system is described to study the impact of tissue architecture on cell phenotype using PDAC as a model system. This fully human system encompassing both primary pancreatic stellate cells and primary organoid cells using the TRACER platform to allow the creation of user-defined TME architectures that have been inferred from clinical PDAC samples and are analyzed by CyTOF to characterize cells extracted from the system. High dimensional characterization using CyTOF demonstrates that tissue architecture leads to distinct hypoxia and proliferation gradients. Furthermore, phenotypic markers for both cell types are also graded in ways that cannot be explained by either hypoxia or coculture alone. This demonstrates the importance of using complex models encompassing cancer cells, stromal cells, and allowing control over architecture to explore the impact of tissue architecture on cell phenotype. It is anticipated that this model will help decipher how tissue architecture and cell interactions regulate cell phenotype and hence cellular and tissue heterogeneity., (© 2022 Wiley-VCH GmbH.)

Complex 3D bioengineered tumour models provide the opportunity to better capture the heterogeneity of patient tumours. Patient-derived organoids are emerging as a useful tool to study tumour heterogeneity and variation in patient responses. Organoid cultures typically require a 3D microenvironment that can be manufactured easily to facilitate screening. Here we set out to create a high-throughput, "off-the-shelf" platform which permits the generation of organoid-containing engineered microtissues for standard phenotypic bioassays and image-based readings. To achieve this, we developed the Scaffold-supported Platform for Organoid-based Tissues (SPOT) platform. SPOT is a 3D gel-embedded in vitro platform that can be produced in a 96- or 384-well plate format and enables the generation of flat, thin, and dimensionally-defined microgels. SPOT has high potential for adoption due to its reproducible manufacturing methodology, compatibility with existing instrumentation, and reduced within-sample and between-sample variation, which can pose challenges to both data analysis and interpretation. Using SPOT, we generate cultures from patient derived pancreatic ductal adenocarcinoma organoids and assess the cellular response to standard-of-care chemotherapeutic compounds, demonstrating our platform's usability for drug screening. We envision 96/384-SPOT will provide a useful tool to assess drug sensitivity of patient-derived organoids and easily integrate into the drug discovery pipeline., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Obesity prevalence has reached pandemic proportions, leaving individuals at high risk for the development of diseases such as cancer and type 2 diabetes. In obesity, to accommodate excess lipid storage, adipocytes become hypertrophic, which is associated with an increased pro-inflammatory cytokine secretion and dysfunction of metabolic processes such as insulin signaling and lipolysis. Targeting adipocyte dysfunction is an important strategy to prevent the development of obesity-associated disease. However, it is unclear how accurately animal models reflect human biology, and the long-term culture of human hypertrophic adipocytes in an in vitro 2D monolayer is challenging due to the buoyant nature of adipocytes. Here we describe the development of a human 3D in vitro disease model that recapitulates hallmarks of obese adipocyte dysfunction. First, primary human adipose-derived mesenchymal stromal cells are embedded in hydrogel, and infiltrated into a thin cellulose scaffold. The thin microtissue profile allows for efficient assembly and image-based analysis. After adipocyte differentiation, the scaffold is stimulated with oleic or palmitic acid to mimic caloric overload. Using functional assays, we demonstrated that this treatment induced important obese adipocyte characteristics such as a larger lipid droplet size, increased basal lipolysis, insulin resistance and a change in macrophage gene expression through adipocyte-conditioned media. This 3D disease model mimics physiologically relevant hallmarks of obese adipocytes, to enable investigations into the mechanisms by which dysfunctional adipocytes contribute to disease., (© 2022 IOP Publishing Ltd.)

Tumors contain heterogeneous and dynamic populations of cells that do not all display the fast-proliferating properties that traditional chemotherapies target. There is a need therefore, to develop novel treatment strategies that target diverse tumor cell properties. Identifying therapy combinations is challenging however. Current approaches have relied on cell lines cultured in monolayers with treatment response being assessed using endpoint metabolic assays, which although enable large-scale throughput, do not capture tumor heterogeneity. Here, a 3D in vitro tumor model using micro-molded hydrogels (microgels), the Gels for Live Analysis of Compartmentalized Environments (GLAnCE) platform, is adapted into a 96-well plate format (96-GLAnCE) that integrates patient-derived organoids (PDOs) and is combined with longitudinal automated imaging to address these limitations. Using 96-GLAnCE, two measures of tumor aggressiveness are quantified, tumor cell growth and in situ regrowth after drug treatment, in both cell lines and PDOs. The use of longitudinal image-based readouts enables the identification of tumor cell phenotypes with cell population and subpopulation resolution that cannot be detected by standard bulk-soluble assays. 96-GLAnCE is a versatile and robust platform that combines 3D-ECM based models, PDOs, and real-time assay readouts, to provide an additional tool for pre-clinical anti-cancer drug discovery for the identification of novel targets with translatable clinical significance., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Patient-derived tumor organoids (PDOs) are a highly promising preclinical model that recapitulates the histology, gene expression, and drug response of the donor patient tumor. Currently, PDO culture relies on basement-membrane extract (BME), which suffers from batch-to-batch variability, the presence of xenogeneic compounds and residual growth factors, and poor control of mechanical properties. Additionally, for the development of new organoid lines from patient-derived xenografts, contamination of murine host cells poses a problem. We propose a nanofibrillar hydrogel (EKGel) for the initiation and growth of breast cancer PDOs. PDOs grown in EKGel have histopathologic features, gene expression, and drug response that are similar to those of their parental tumors and PDOs in BME. In addition, EKGel offers reduced batch-to-batch variability, a range of mechanical properties, and suppressed contamination from murine cells. These results show that EKGel is an improved alternative to BME matrices for the initiation, growth, and maintenance of breast cancer PDOs., (© 2022. Crown.)

Protein purification is a ubiquitous procedure in biochemistry and the life sciences, and represents a key step in the protein production pipeline. The need for scalable and parallel protein purification systems is driven by the demands for increasing the throughput of recombinant protein characterization. Therefore, automating the process to simultaneously handle multiple samples with minimal human intervention is highly desirable, yet there are only a handful of such systems that have been developed, all of which are closed source and expensive. To address this challenge, we present REVOLVER, a 3D-printed programmable protein purification system based on gravity-column workflows and controlled by Arduino boards that can be built for under $130 USD. REVOLVER takes a cell lysate sample and completes a full protein purification process with almost no human intervention and yields results indistinguishable from those obtained by an experienced biochemist when purifying a real-world protein sample. We further present and describe MULTI-VOLVER, a scalable version of the REVOLVER that allows for parallel purification of up to six samples and can be built for under $250 USD. Both systems can help accelerate protein purification and ultimately link them to bio-foundries for protein characterization and engineering., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2022 The Author(s).)

The aryl hydrocarbon receptor (AhR) is a sensor of products of tryptophan metabolism and a potent modulator of immunity. Here, we examined the impact of AhR in tumor-associated macrophage (TAM) function in pancreatic ductal adenocarcinoma (PDAC). TAMs exhibited high AhR activity and Ahr-deficient macrophages developed an inflammatory phenotype. Deletion of Ahr in myeloid cells or pharmacologic inhibition of AhR reduced PDAC growth, improved efficacy of immune checkpoint blockade, and increased intra-tumoral frequencies of IFNγ + CD8 + T cells. Macrophage tryptophan metabolism was not required for this effect. Rather, macrophage AhR activity was dependent on Lactobacillus metabolization of dietary tryptophan to indoles. Removal of dietary tryptophan reduced TAM AhR activity and promoted intra-tumoral accumulation of TNFα + IFNγ + CD8 + T cells; provision of dietary indoles blocked this effect. In patients with PDAC, high AHR expression associated with rapid disease progression and mortality, as well as with an immune-suppressive TAM phenotype, suggesting conservation of this regulatory axis in human disease., Competing Interests: Declaration of interests The authors have no conflicting interests to declare., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Topographical cues are known to influence cell organization both in native tissues and in vitro . In the trachea, the matrix beneath the epithelial lining is composed of collagen fibres that run along the long axis of the airway. Previous studies have shown that grooved topography can induce morphological and cytoskeletal alignment in epithelial cell lines. In the present work we assessed the impact of substrate topography on the organization of primary human tracheal epithelial cells (HTECs) and human induced pluripotent stem cell (hiPSC)-derived airway progenitors and the resulting alignment of cilia after maturation of the airway cells under Air-Liquid-Interface (ALI) culture. Grooves with optimized dimensions were imprinted into collagen vitrigel membranes (CVM) to produce gel inserts for ALI culture. Grooved CVM substrates induced cell alignment in HTECs and hiPSC airway progenitors in submerged culture. Further, both cell types were able to terminally differentiate into a multi-ciliated epithelium on both flat and groove CVM substrates. When exposed to ALI conditions, HTECs lost alignment after 14 days. Meanwhile, hiPSC-derived airway progenitors maintained their alignment throughout 31 days of ALI culture. Interestingly, neither initial alignment on the grooves, nor maintained alignment on the grooves induced alignment of cilia basal bodies, an indication of the direction of ciliary beating direction in the airway cells. Planar organization of airway cells during or prior to ciliogenesis therefore does not appear to be a feasible strategy to control cilia organization and subsequent airway epithelial function and additional cues are likely necessary to produce cilia alignment.

One of the obstacles limiting progress in the development of effective cancer therapies is the shortage of preclinical models that capture the dynamic nature of tumor microenvironments. Interstitial flow strongly impacts tumor response to chemotherapy; however, conventional in vitro cancer models largely disregard this key feature. Here, a proof of principle microfluidic platform for the generation of large arrays of breast tumor spheroids that are grown under close-to-physiological flow in a biomimetic hydrogel is reported. This cancer spheroids-on-a-chip model is used for time- and labor-efficient studies of the effects of drug dose and supply rate on the chemosensitivity of breast tumor spheroids. The capability to grow large arrays of tumor spheroids from patient-derived cells of different breast cancer subtypes is shown, and the correlation between in vivo drug efficacy and on-chip spheroid drug response is demonstrated. The proposed platform can serve as an in vitro preclinical model for the development of personalized cancer therapies and effective screening of new anticancer drugs., (© 2021 Wiley-VCH GmbH.)

Chemically directed differentiation of pluripotent stem cells (PSCs) into defined cell types is a potent strategy for creating regenerative tissue models and cell therapies. In vitro observations suggest that physical cues can augment directed differentiation. We recently demonstrated that confining human PSC-derived lung progenitor cells in a tube with a diameter that mimics those observed during lung development results in the alteration of cell differentiation towards SOX2 - SOX9 + lung cells. Here we set out to assess the robustness of this geometric confinement effect with respect to different culture parameters in order to explore the corresponding changes in cell morphometry and determine the feasibility of using such an approach to enhance directed differentiation protocols. Culture of progenitor cells in polydimethylsiloxane (PDMS) tubes reliably induced self-organization into tube structures and was insensitive to a variety of extracellular matrix coatings. Cellular morphology and differentiation status were found to be sensitive to the diameter of tube cells that were cultured within but not to seeding density. These data suggest that geometric cues impose constraints on cells, homogenize cellular morphology, and influence fate status.

Cell competition is defined as the context-dependent elimination of cells that is mediated by intercellular communication, such as paracrine or contact-dependent cell signaling, and/or mechanical stresses. It is considered to be a quality control mechanism that facilitates the removal of suboptimal cells from both adult and embryonic tissues. Cell competition, however, can also be hijacked by transformed cells to acquire a 'super-competitor' status and outcompete the normal epithelium to establish a precancerous field. To date, many genetic drivers of cell competition have been identified predominately through studies in Drosophila. Especially during the last couple of years, ethylmethanesulfonate-based genetic screens have been instrumental to our understanding of the molecular regulators behind some of the most common competition mechanisms in Drosophila, namely competition due to impaired ribosomal function (or anabolism) and mechanical sensitivity. Despite recent findings in Drosophila and in mammalian models of cell competition, the drivers of mammalian cell competition remain largely elusive. Since the discovery of CRISPR/Cas9, its use in functional genomics has been indispensable to uncover novel cancer vulnerabilities. We envision that CRISPR/Cas9 screens will enable systematic, genome-scale probing of mammalian cell competition to discover novel mutations that not only trigger cell competition but also identify novel molecular components that are essential for the recognition and elimination of less fit cells. In this review, we summarize recent contributions that further our understanding of the molecular mechanisms of cell competition by genetic screening in Drosophila, and provide our perspective on how similar and novel screening strategies made possible by whole-genome CRISPR/Cas9 screening can advance our understanding of mammalian cell competition in the future., (© The Author(s) 2021. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

Omics technologies, such as genomics, epigenomics, transcriptomics, proteomics, metabolomics, lipidomics, multiomics, and integrated modalities, have greatly contributed to our understanding of various diseases by enabling researchers to probe the molecular wiring of cellular systems in a high-throughput and precise manner. With the development of tissue-engineered three-dimensional (3D) in vitro disease models, such as organoids and spheroids, there is potential of integrating omics technologies with 3D disease models to elucidate the complex links between genotype and phenotype. These 3D disease models have been used to model cancer, infectious disease, toxicity, neurological disorders, and others. In this review, we provide an overview of omics technologies, highlight current and emerging studies, discuss the associated experimental design considerations, barriers and challenges of omics technologies, and provide an outlook on the future applications of omics technologies with 3D models. Overall, this review aims to provide a valuable resource for tissue engineers seeking to leverage omics technologies for diving deeper into biological discovery. Impact statement With the emergence of three-dimensional (3D) in vitro disease models, tissue engineers are increasingly interested to investigate these systems to address biological questions related to disease mechanism, drug target discovery, therapy resistance, and more. Omics technologies are a powerful and high-throughput approach, but their application for 3D disease models is not maximally utilized. This review illustrates the achievements and potential of using omics technologies to leverage the full potential of 3D in vitro disease models. This will improve the quality of such models, advance our understanding of disease, and contribute to therapy development.

Interactions between tumor cells and the extracellular matrix (ECM) are an important factor contributing to therapy failure in cancer patients. Current in vitro breast cancer spheroid models examining the role of mechanical properties on spheroid response to chemotherapy are limited by the use of two-dimensional cell culture, as well as simultaneous variation in hydrogel matrix stiffness and other properties, e.g., hydrogel composition, pore size, and cell adhesion ligand density. In addition, currently used hydrogel matrices do not replicate the filamentous ECM architecture in a breast tumor microenvironment. Here, we report a collagen-alginate hydrogel with a filamentous architecture and a 20-fold variation in stiffness, achieved independently of other properties, used for the evaluation of estrogen receptor-positive breast cancer spheroid response to doxorubicin. The variation in hydrogel mechanical properties was achieved by altering the degree of cross-linking of alginate molecules. We show that soft hydrogels promote the growth of larger MCF-7 tumor spheroids with a lower fraction of proliferating cells and enhance spheroid resistance to doxorubicin. Notably, the stiffness-dependent chemotherapeutic response of the spheroids was temporally mediated: it became apparent at sufficiently long cell culture times, when the matrix stiffness has influenced the spheroid growth. These findings highlight the significance of decoupling matrix stiffness from other characteristics in studies of chemotherapeutic resistance of tumor spheroids and in development of drug screening platforms.

Micropatterning is a process to precisely deposit molecules, typically proteins, onto a substrate of choice with micrometer resolution. Watson et al. (2021. J. Cell Biol.https://doi.org/10.1083/jcb.202009063) describe an innovative yet accessible strategy to enable the reproducible micropatterning of virtually any protein while maintaining its biological activity., (© 2021 Latour and McGuigan.)

During organogenesis groups of differentiating cells self-organize into a series of structural intermediates with defined architectural forms. Evidence is emerging that such architectural forms are important in guiding cell fate, yet in vitro methods to guide cell fate have focused primarily on un-patterned exposure of stems cells to developmentally relevant chemical cues. We set out to ask if organizing differentiating lung progenitors into developmentally relevant structures could be used to influence differentiation status. Specifically, we use elastomeric substrates to guide self-assembly of human pluripotent stem cell-derived lung progenitors into developmentally-relevant sized tubes and assess the impact on differentiation. Culture in 100 μm tubes reduced the percentage of SOX2 + SOX9 + cells and reduced proximal fate potential compared to culture in 400 μm tubes or on flat surfaces. Cells in 100 μm tubes curved to conform to the tube surface and experienced increased cellular tension and reduced elongation. Pharmacologic disruption of tension through inhibition of ROCK, myosin II activity and actin polymerization in tubes resulted in maintenance of SOX2 + SOX9 + populations. Furthermore, this effect required canonical WNT signaling. This data suggests that structural forms, when developmentally relevant, can drive fate choice during directed differentiation via a tension-based canonical WNT dependent mechanism., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Cancer associated fibroblasts (CAFs) are a major cellular component of the tumour stroma and have been shown to promote tumour cell invasion and disease progression. CAF-cancer cell interactions are bi-directional and occur via both soluble factor dependent and extracellular matrix (ECM) remodelling mechanisms, which are incompletely understood. Previously we developed the Tissue Roll for Analysis of Cellular Environment and Response (TRACER), a novel stacked paper tumour model in which cells embedded in a hydrogel are infiltrated into a porous cellulose scaffold that is then rolled around an aluminum core to generate a multi-layered 3D tissue. Here, we use the TRACER platform to explore the impact of CAFs derived from three different patients on the invasion of two head and neck squamous cell carcinoma (HNSCC) cell lines (CAL33 and FaDu). We find that co-culture with CAFs enhances HNSCC tumour cell invasion into an acellular collagen layer in TRACER and this enhanced migration occurs independently of proliferation. We show that CAF-enhanced invasion of CAL33 cells is driven by a soluble factor independent mechanism, likely involving CAF mediated ECM remodelling via matrix metalloprotenases (MMPs). Furthermore, we find that CAF-enhanced tumour cell invasion is dependent on the spatial pattern of collagen density within the culture. Our results highlight the utility of the co-culture TRACER platform to explore soluble factor independent interactions between CAFs and tumour cells that drive increased tumour cell invasion.

The tumour microenvironment (TME) determines vital aspects of tumour development, such as tumour growth, metastases and response to therapy. Cancer-associated fibroblasts (CAFs) are abundant and extremely influential in this process and interact with cellular and matrix TME constituents such as endothelial and immune cells and collagens, fibronectin and elastin, respectively. However, CAFs are also the recipients of signals-both chemical and physical-that are generated by the TME, and their phenotype effectively evolves alongside the tumour mass during tumour progression. Amid a rising clinical interest in CAFs as a crucial force for disease progression, this review aims to contextualise the CAF phenotype using the chronological framework of the CAF life cycle within the evolving tumour stroma, ranging from quiescent fibroblasts to highly proliferative and secretory CAFs. The emergence, properties and clinical implications of CAF activation are discussed, as well as research strategies used to characterise CAFs and current clinical efforts to alter CAF function as a therapeutic strategy.

Chronic lung diseases remain major healthcare burdens, for which the only curative treatment is lung transplantation. In vitro human models are promising platforms for identifying and testing novel compounds to potentially decrease this burden. Directed differentiation of pluripotent stem cells is an important strategy to generate lung cells to create such models. Current lung directed differentiation protocols are limited as they do not 1) recapitulate the diversity of respiratory epithelium, 2) generate consistent or sufficient cell numbers for drug discovery platforms, and 3) establish the histologic tissue-level organization critical for modeling lung function. In this review, we describe how lung development has formed the basis for directed differentiation protocols, and discuss the utility of available protocols for lung epithelial cell generation and drug development. We further highlight tissue engineering strategies for manipulating biophysical signals during directed differentiation such that future protocols can recapitulate both chemical and physical cues present during lung development., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The interface between a tumour and the adjacent stroma is a site of great importance for tumour development. At this site, carcinoma cells are highly proliferative, undergo invasive phenotypic changes, and directly interact with surrounding stromal cells, such as cancer-associated fibroblasts (CAFs) which further exert pro-tumorigenic effects. Here we describe the development of GLAnCE (Gels for Live Analysis of Compartmentalized Environments), an easy-to-use hydrogel-culture platform for investigating CAF-tumour cell interaction dynamics in vitro at a tumour-stroma interface. GLAnCE enables observation of CAF-mediated enhancement of both tumour cell proliferation and invasion at the tumour-stroma interface in real time, as well as stratification between phenotypes at the interface versus in the bulk tumour tissue compartment. We found that CAF presence resulted in the establishment of an invasion-permissive, interface-specific matrix environment, that leads to carcinoma cell movement outwards from the tumour edge and tumour cell invasion. Furthermore, the spatial stratification capability of GLAnCE was leveraged to discern differences between tumour cell epithelial-to-mesenchymal (EMT) transition genes induced by paracrine signalling from CAFs versus genes induced by interface-specific, CAF-mediated microenvironment. GLAnCE combines high usability and tissue complexity, to provide a powerful in vitro platform to probe mechanisms of tumour cell movement specific to the microenvironment at the tumour-stroma interface., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

In many types of solid cancer, interactions between tumour cells and their surrounding microenvironment significantly impact disease progression, and patient prognosis. Tissue engineered models permit investigations of cellular behaviour and interactions in the context of this diseased microenvironment. Previously our group developed the tissue roll for analysis of cellular environment and response (TRACER) platform. To improve the manufacturing robustness of the TRACER platform and to enhance its use for studies involving multiple cell types, we have developed a bioprinting process that deposits cell-laden collagen hydrogel into a thin cellulose scaffolding sheet though a contact-wicking printing process. Printed scaffolds can then be assembled into layered 3D cultures where the location of cells in 3D is dependent on their printed position in the 2D sheet. After a desired culture time 3D TRACERs can be disassembled to easily assess printed cell re-location and phenotype within the heterogeneous microenvironments of the 3D tissue. In our bioprinting manufacturing process, cells are printed into scaffolding sheets, using a modified 3D bioprinter to extrude cells encapsulated in unmodified collagen hydrogel through a polydimethylsiloxane (PDMS) printer extrusion nozzle. This nozzle design reproducibly generated bioink deposition profiles in the scaffold without causing significant cellular damage or compromising scaffold integrity. We assessed print pattern quality and reproducibility and demonstrated printing of co-culture strips containing tumour cells and fibroblasts in separate compartments (i.e. separate TRACER layers). This printing approach will potentially enable adoption of the TRACER platform to the broader community to better understand multi-cell type interactions in 3D tumours and tissues.

Coordinated cell re-organization is critical to ensure correct tissue morphogenesis for a number of important embryonic and tissue repair events, however the mechanisms that govern cells coordination during collective movements, particularly in situations where cells are spatially restricted by their neighbours, are not well understood. Here we assessed cell re-organization in monolayers of retinal epithelial cells (ARPE-19) to determine if cells that coordinate with their neighbours exhibit differential migration properties to non-coordinating cells and participate differently in local cell re-organization of the tissue sheet. From global tracking analysis, we determined that the movement profiles of cells were indistinguishable regardless of whether or not they were a part of multicellular streams. Using high magnification live imaging of cell membranes, we also characterized the localized geometry and organization of a monolayer (cell area, number of nearest neighbours, aspect ratio, internal cell angles) during cell re-organization in both streaming and non-streaming regions. Consistent with our global migration analysis, we observed no differences in cell sheet geometry and organization in streaming versus non-streaming regions. We did however observe that cells executed T1-like transitions to exchange position within the space-limited monolayer and that exchange events consistently involved at least one non-streaming cell. Our data suggests a model in which cell movement within the sheet is limited by neighbour exchange events and likely cells transition between streaming and non-streaming regimes to facilitate these neighbour exchange events while maintaining the integrity of the sheet., (© The Author(s) 2019. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

This protocol describes how to build and implement a three-dimensional (3D) cell culture system, TRACER (tissue roll for analysis of cellular environment and response), that enables analysis of cellular behavior and phenotype in hypoxic gradients. TRACER consists of infiltrating cells encapsulated in a hydrogel extracellular matrix (ECM) within a thin strip of porous cellulose scaffolding that is then rolled around an oxygen-impermeable mandrel for assembly of thick and layered 3D tissue constructs that develop cell-defined oxygen gradients. TRACER differs from other stacked-paper cell culture models because it is assembled from a single-piece scaffold, which facilitates rapid disassembly for analysis of different cell populations and metabolites. The protocol describes how to fabricate TRACER components, cell seeding in the scaffold, and scaffold assembly and disassembly. Furthermore, it provides methods to quantify live, dead, or proliferating cells, as well as gradients of oxygen using the nitroimidazole derivative EF5, in a layer-by-layer analysis with confocal microscopy or by flow cytometry of cells isolated from the TRACER scaffold. Additional methods to isolate live cells from TRACER layers for dose-response analysis with a clonogenic assay, as well as steps to extract RNA or fast-changing metabolites from TRACER layers, are also presented. Finally, we provide alternative steps to establish TRACER co-cultures for assessment of tumor cell invasion and metastasis, in this case in the absence of a hypoxic gradient. Although analysis time varies according to the assay chosen, scaffold fabrication and seeding typically take 2 h, and TRACER assembly takes 20 min on the day following scaffold seeding. The TRACER platform is designed for use by researchers and students who have basic tissue culture experience.

Cancer-associated fibroblasts (CAFs) are a key component of the tumour microenvironment and have been shown to play an important role in the progression of cancer. To probe these tumour-stroma interactions, we incorporated CAFs derived from head and neck cancer patients and squamous carcinoma cells of the hypopharynx (FaDu) into the Tissue Roll for the Analysis of Cellular Environment and Response (TRACER) platform to establish a co-culture platform that simulates the CAF-tumour microenvironmental interactions in head and neck tumours. TRACER culture involves infiltrating cells into a thin fibrous scaffold and then rolling the resulting biocomposite around a mandrel to generate a 3D and layered structure. Patterning the fibrous scaffold biocomposite during fabrication enables control over the specific location of different cell populations in the rolled configuration. Here, we optimized the seeding densities and configurations of the CAF and FaDu cell tissue sections to enable a robust 3D co-culture system under normoxic conditions. Co-culture of CAFs with FaDu cells produced negligible effects on radiation resistance, but did produce increases in proliferation rate and invasive cell migration at 24 and 48 h of culture. Our study provides the basis for use of our in vitro co-culture TRACER model to investigate the tumour-stroma interactions, and to bridge the translational gap between preclinical and clinical studies., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Cancer prognosis remains a lottery dependent on cancer type, disease stage at diagnosis, and personal genetics. While investment in research is at an all-time high, new drugs are more likely to fail in clinical trials today than in the 1970s. In this review, a summary of current survival statistics in North America is provided, followed by an overview of the modern drug discovery process, classes of models used throughout different stages, and challenges associated with drug development efficiency are highlighted. Then, an overview of the cancer hallmarks that drive clinical progression is provided, and the range of available clinical therapies within the context of these hallmarks is categorized. Specifically, it is found that historically, the development of therapies is limited to a subset of possible targets. This provides evidence for the opportunities offered by novel disease-relevant in vitro models that enable identification of novel targets that facilitate interactions between the tumor cells and their surrounding microenvironment. Next, an overview of the models currently reported in literature is provided, and the cancer biology they have been used to explore is highlighted. Finally, four priority areas are suggested for the field to accelerate adoption of in vitro tumour models for cancer drug discovery., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

There is a need to establish in vitro lung alveolar epithelial culture models to better understand the fundamental biological mechanisms that drive lung diseases. While primary alveolar epithelial cells (AEC) are a useful option to study mature lung biology, they have limited utility in vitro. Cells that survive demonstrate limited proliferative capacity and loss of phenotype over the first 3-5 days in traditional culture conditions. To address this limitation, we generated a novel physiologically relevant cell culture system for enhanced viability and maintenance of phenotype. Here we describe a method utilizing e-beam lithography, reactive ion etching, and replica molding to generate poly-dimethylsiloxane (PDMS) substrates containing hemispherical cavities that mimic the architecture and size of mouse and human alveoli. Primary AECs grown on these cavity-containing substrates form a monolayer that conforms to the substrate enabling precise control over cell sheet architecture. AECs grown in cavity culture conditions remain viable and maintain their phenotype over one week. Specifically, cells grown on substrates consisting of 50 μm diameter cavities remained 96 ± 4% viable and maintained expression of surfactant protein C (SPC), a marker of type 2 AEC over 7 days. While this report focuses on primary lung alveolar epithelial cells, our culture platform is potentially relevant and useful for growing primary cells from other tissues with similar cavity-like architecture and could be further adapted to other biomimetic shapes or contours.

Compartment boundaries are essential for ensuring proper cell organization during embryo development and in adult tissues, yet the mechanisms underlying boundary establishment are not completely understood. A number of mechanisms, including (i) differential adhesion, (ii) differential tension, and (iii) cell signaling-mediated cell repulsion, are known to contribute and likely a context-dependent balance of each of these dictates boundary implementation. The ephrin/Eph signaling pathway is known to impact boundary formation in higher animals. In different contexts, ephrin/Eph signaling is known to modulate adhesive properties and migratory behavior of cells. Furthermore it has been proposed that ephrin/Eph signaling may modulate cellular tensile properties, leading to boundary implementation. It remains unclear however, whether, in different contexts, ephrin/Eph act through distinct dominant action modes (e.g. differential adhesion vs. cell repulsion), or whether ephrin/Eph signaling elicits multiple cellular changes simultaneously. Here, using micropatterning of cells over-expressing either EphB3 or ephrinB1, we assess the contribution of each these factors in one model. We show that in this system ephrinB1/EphB3-mediated boundaries are accompanied by modulation of tissue-level architecture and polarization of cell migration. These changes are associated with changes in cell shape and cytoskeletal organization also suggestive of altered cellular tension.

The tumour microenvironment is heterogeneous and consists of multiple cell types, variable extracellular matrix (ECM) composition, and contains cell-defined gradients of small molecules, oxygen, nutrients and waste. Emerging in vitro cell culture systems that attempt to replicate these features often fail to incorporate design strategies to facilitate efficient data collection and stratification. The tissue roll for analysis of cellular environment and response (TRACER) is a novel strategy to assemble layered, three-dimensional tumours with cell-defined, graded heterogeneous microenvironments that also facilitates cellular separation and stratification of data from different cell populations from specific microenvironments. Here we describe the materials selection and development of TRACER. We find that cellulose fibre scaffolding is an ideal support to generate tissue constructs having homogenous cell seeding and consistent properties. We explore ECM remodeling and long-term cell growth in the scaffold, and characterize the tumour microenvironment in assembled TRACERs using multiple established analysis methods. Finally, we confirm that TRACERs replicate small molecule gradients of glucose and lactate, and explore cell phenotype associated with these gradients using confocal microscopy, flow cytometry, and quantitative PCR analysis. We envision this technology will provide a platform to create complex, yet controlled tumour microenvironments that can be easily disassembled for snapshot analysis of cell phenotype and response to therapy in relation to microenvironment properties.

There is a clinical need for new, more effective treatments for chronic wounds in diabetic patients. Lack of epithelial cell migration is a hallmark of nonhealing wounds, and diabetes often involves endothelial dysfunction. Therefore, targeting re-epithelialization, which mainly involves keratinocytes, may improve therapeutic outcomes of current treatments. In this study, we present an integrin-binding prosurvival peptide derived from angiopoietin-1, QHREDGS (glutamine-histidine-arginine-glutamic acid-aspartic acid-glycine-serine), as a therapeutic candidate for diabetic wound treatments by demonstrating its efficacy in promoting the attachment, survival, and collective migration of human primary keratinocytes and the activation of protein kinase B Akt and MAPK p42/44 The QHREDGS peptide, both as a soluble supplement and when immobilized in a substrate, protected keratinocytes against hydrogen peroxide stress in a dose-dependent manner. Collective migration of both normal and diabetic human keratinocytes was promoted on chitosan-collagen films with the immobilized QHREDGS peptide. The clinical relevance was demonstrated further by assessing the chitosan-collagen hydrogel with immobilized QHREDGS in full-thickness excisional wounds in a db/db diabetic mouse model; QHREDGS showed significantly accelerated and enhanced wound closure compared with a clinically approved collagen wound dressing, peptide-free hydrogel, or blank wound controls. The accelerated wound closure resulted primarily from faster re-epithelialization and increased formation of granulation tissue. There were no observable differences in blood vessel density or size within the wound; however, the total number of blood vessels was greater in the peptide-hydrogel-treated wounds. Together, these findings indicate that QHREDGS is a promising candidate for wound-healing interventions that enhance re-epithelialization and the formation of granulation tissue., Competing Interests: The authors declare no conflict of interest.

In the past decade, it has been well recognised that the tumour microenvironment contains microenvironmental components such as hypoxia that significantly influence tumour cell behaviours such, invasiveness and therapy resistance, all of which provide new targets for studying cancer biology and developing anticancer therapeutics. In response, a large number of two-dimensional and three-dimensional (3D) in vitro tumour models have been developed to recapitulate different aspects of the tumour microenvironment and enable the study of related biological questions. While more complex models enable new biological insight, such models often involve time-consuming and complex fabrication or analysis processes, which limit their adoption by the broader cancer biology community. To address this, we recently reported the development of a new platform that enables easy assembly and analysis of 3D tumour cultures, the tissue roll for analysis of cellular environment response (TRACER). The TRACER platform enables recapitulation of many spatial aspects of the tumour microenvironment to ask a variety of questions, however its original design contains only one cell type. In contrast tumours in vivo often contain a neoplastic and stromal compartment. To expand the types of questions the TRACER system is useful for asking, here we present a strategy to pattern distinct cell type domains into TRACER layers using a custom-built gelatin-dispensing pen. The pen allows deposition of a temporary gelatin barrier into the TRACER scaffold to define domain boundaries between cell populations. The gelatin can be melted away after cell seeding to allow interaction of cell populations from adjacent domains. Our device offers a simple strategy to generate complex multi-cell type tumour cultures for analysis of fundamental biology and drug development applications.

Recapitulating the architecture of native tissue remains a significant challenge, impeding the progress of engineering tissues. Imposing appropriate organization is especially challenging in tissues that contain multiple cellular components in complex structural units. One solution is to mimic developmental processes in embryos. In an embryo, cells are organized by tissue patterning, whereby induction of fate-determining genes is spatially controlled to generate patterns of cell differentiation and maturation. Following patterning, the imposed cell organization is further reinforced by implementation of compartment boundaries, which prevent intermingling of cells from distinct phenotypic domains, thereby ensuring preservation of proper cell organization in growing and reorganizing tissues. Both morphogenic processes utilize a conserved set of fundamental principles, the implementation of which leads to highly regulated cell organization. In this article, we review these patterning principles in vivo and reflect on the progress made by tissue engineers in mimicking tissue patterning ex vivo.

The profound metabolic reprogramming that occurs in cancer cells has been investigated primarily in two-dimensional cell cultures, which fail to recapitulate spatial aspects of cell-to-cell interactions as well as tissue gradients present in three-dimensional tumours. Here, we describe an engineered model to assemble three-dimensional tumours by rolling a scaffold-tumour composite strip. By unrolling the strip, the model can be rapidly disassembled for snapshot analysis, allowing spatial mapping of cell metabolism in concert with cell phenotype. We also show that the establishment of oxygen gradients within samples that are shaped by oxygen-dependent signalling pathways, as well as the consequential variations in cell growth, response to hypoxic gradients extending from normoxia to severe hypoxia, and therapy responsiveness, are consistent with those of tumours in vivo. Moreover, by using liquid chromatography tandem mass spectrometry, we mapped cellular metabolism and identified spatially defined metabolic signatures of cancer cells to reveal both known and novel metabolic responses to hypoxia.

During development and in adult tissues separation of phenotypically distinct cell populations is necessary to ensure proper organization and function of tissues and organs. Various phenomena, such as differential adhesion, differential mechanical tension and cell-cell repulsion, are proposed to cause boundary formation. Moreover, emerging evidence suggests that interplay between multiple such phenomena can underlie boundary formation. Boundary-forming mechanisms are commonly studied in vivo in complex embryo models or in vitro using simple model systems not reflective of in vivo boundary complexity. To better elucidate the interplay between multiple boundary formation mechanism, there is therefore a need for more relevant in vitro model systems that allow quantitative and concomitant studies of the multiple changes in cell/tissue behaviour that lead to boundary establishment. Here, we develop such a model using patterned co-cultures of two cell populations. Using a set of quantitative tools, we demonstrate that our approach allows us to study the mechanisms underlying boundary formation. We demonstrate that in our specific system differential mechanical tension and modulation of migratory behavior of cells accompany boundary formation. The design of our in vitro model system will allow researchers to obtain quantitative, integrative mechanistic data facilitating a faster and more thorough understanding of the fundamental principles underlying boundary formation.

Epithelial tissues are a critical component of all tubular organs. Engineering artificial epithelium requires an understanding of the polarization of epithelia: both apicobasal and in a planar fashion. Air liquid interface (ALI) culture is typically used to generate apicobasal polarized airway epithelium in vitro; however, this approach does not provide any signalling cues to induce morphological planar polarization of the generated epithelial layer. Here we describe a microgrooved gelatin hydrogel insert that can induce alignment of confluent epithelial cell sheets under ALI conditions to induce both apicobasal and morphologically planar polarized epithelium. Microgrooves are imprinted into the surface of the gelatin insert using elastomeric stamps moulded from a diffraction grating film and gels are stabilized by crosslinking with glutaraldehyde. We show that microgrooved gelatin inserts produce alignment of 3T3 fibroblasts and a number of epithelial cell lines (ARPE-19, BEAS2B and IMCD3 cells). Furthermore, we show that BEAS2B apicobasally polarize and form a similar density of cilia on both gelatin inserts and standard transwell filters used for ALI culture but that as apicobasal polarization progresses cell alignment on the grooves is lost. Our method provides a simple strategy that can easily be adopted by labs without microfabrication expertise for manipulating epithelial organization in transwell culture and studying the interplay of various polarization forces.

Micropatterning strategies, which enable control over cell and tissue architecture in vitro, have emerged as powerful platforms for modelling tissue microenvironments at different scales and complexities. Here, we provide an overview of popular micropatterning techniques, along with detailed descriptions, to guide new users through the decision making process of which micropatterning procedure to use, and how to best obtain desired tissue patterns. Example techniques and the types of biological observations that can be made are provided from the literature. A focus is placed on microcontact printing to obtain co-cultures of patterned, confluent sheets, and the challenges associated with optimizing this protocol. Many issues associated with microcontact printing, however, are relevant to all micropatterning methodologies. Finally, we briefly discuss challenges in addressing key limitations associated with current micropatterning technologies.

Grooved substrates are commonly used to guide cell alignment and produce in vitro tissues that mimic certain aspects of in vivo cellular organization. These more sophisticated tissues provide valuable in vitro models for testing drugs and for dissecting out molecular mechanisms that direct tissue organization. To increase the accessibility of these tissue models we describe a simple and yet reproducible strategy to produce 1 µm-spaced grooved well plates suitable for conducting automated analysis of cellular responses. We characterize the alignment of four human cell types: retinal epithelial cells, umbilical vein endothelial cells, foreskin fibroblasts, and human pluripotent stem-cell-derived cardiac cells on grooves. We find all cells align along the grooves to differing extents at both sparse and confluent densities. To increase the sophistication of in vitro tissue organization possible, we also created hybrid substrates with controlled patterns of microgrooved and flat regions that can be identified in real-time using optical microscopy. Using our hybrid patterned surfaces we explore: (i) the ability of neighboring cells to provide a template to organize surrounding cells that are not directly exposed to grooved topographic cues, and (ii) the distance over which this template effect can operate in confluent cell sheets. We find that in fibroblast sheets, but not epithelial sheets, cells aligned on grooves can direct alignment of neighboring cells in flat regions over a limited distance of approximately 200 μm. Our hybrid surface plate provides a novel tool for studying the collective response of groups of cells exposed to differential topographical cues., (© 2014 Wiley Periodicals, Inc.)

Organization of airway epithelium determines ciliary beat direction and coordination for proper mucociliary clearance. Fluidic shear stresses have the potential to influence ciliary organization. Here, an in vitro fluidic flow system was developed for inducing long-term airflow shear stresses on airway epithelium with a view to influencing epithelial organization. Our system consists of a fluidic device for cell culture, integrated into a humidified airflow circuit. The fluidic device has a modular design and is made from a combination of polystyrene and adhesive components incorporated into a 6-well filter membrane insert. We demonstrate the system operates within physiologically relevant shear and pressure ranges and estimate the shear stress exerted on the epithelial cell layer as a result of air flow using a computational model. For both the bronchial epithelial cell line BEAS2B and primary human tracheal airway epithelial cells, we demonstrate that cells remain viable within the device when exposed to airflow for 24 h and that normal differentiation and cilia formation occurs. Furthermore, we demonstrate the utility of our device for exploring the impact of exposing cells to airflow: our tool enables quantification of cytoskeletal organization, and is compatible with in situ bead assays to assess the orientation of cilia beating.

Directed migration of groups of cells is a critical aspect of tissue morphogenesis that ensures proper tissue organization and, consequently, function. Cells moving in groups, unlike single cells, must coordinate their migratory behavior to maintain tissue integrity. During directed migration, cells are guided by a combination of mechanical and chemical cues presented by neighboring cells and the surrounding extracellular matrix. One important class of signals that guide cell migration includes topographic cues. Although the contact guidance response of individual cells to topographic cues has been extensively characterized, little is known about the response of groups of cells to topographic cues, the impact of such cues on cell-cell coordination within groups, and the transmission of nonautonomous contact guidance information between neighboring cells. Here, we explore these phenomena by quantifying the migratory response of confluent monolayers of epithelial and fibroblast cells to contact guidance cues provided by grooved topography. We show that, in both sparse clusters and confluent sheets, individual cells are contact-guided by grooves and show more coordinated behavior on grooved versus flat substrates. Furthermore, we demonstrate both in vitro and in silico that the guidance signal provided by a groove can propagate between neighboring cells in a confluent monolayer, and that the distance over which signal propagation occurs is not significantly influenced by the strength of cell-cell junctions but is an emergent property, similar to cellular streaming, triggered by mechanical exclusion interactions within the collective system.

The epithelium is one of the most important tissue types in the body and the specific organization of the epithelial cells in these tissues is important for achieving appropriate function. Since many tissues contain an epithelial component, engineering functional epithelium and understanding the factors that control epithelial maturation and organization are important for generating whole artificial organ replacements. Furthermore, disruption of the cellular organization leads to tissue malfunction and disease; therefore, engineered epithelium could provide a valuable in vitro model to study disease phenotypes. Despite the importance of epithelial tissues, a surprisingly limited amount of effort has been focused on organizing epithelial cells into artificial polarized epithelium with an appropriate structure that resembles that seen in vivo. In this review, we provide an overview of epithelial tissue organization and highlight the importance of cell polarization to achieve appropriate epithelium function. We next describe the in vitro models that exist to create polarized epithelium and summarize attempts to engineer artificial epithelium for clinical use. Finally, we highlight the opportunities that exist to translate strategies from tissue engineering other tissues to generate polarized epithelium with a functional structure.

In many tissues, cells must be aligned for proper function. This alignment can occur at the cellular and/or subcellular (protein/molecular) level. The alignment of cytoskeletal components, in fact, precedes whole cell alignment. A variety of methods exist to manipulate cytoskeletal and whole cell alignment; one of the simplest and most predictable involves seeding adherent cells onto defined substrate topography. We present here two methods to create grooved multiwell plates: one involving microfabrication, which allows for custom design of substrate topography, and a simpler, inexpensive method using commercially available diffraction gratings. We also include methods for manual and automatic quantification of cell alignment.

Epithelium is abundantly present in the human body as it lines most major organs. Therefore, ensuring the proper function of epithelium is pivotal for successfully engineering whole organ replacements. An important characteristic of mature epithelium is apical-basal polarization which can be obtained using the air-liquid interface (ALI) culture system. Micropatterning is a widely used bioengineering strategy to spatially control the location and organization of cells on tissue culture substrates. Micropatterning is therefore an interesting method for generating patterned epithelium. Enabling micropatterning of epithelial cells however requires micropatterning methods that are designed to (i) be compatible with permeable membranes substrates and (ii) allow prolonged culture of patterned cells, both of which are required for appropriate epithelial apical-basal polarization. Here, we describe a number of methods we have developed for generating monoculture as well as coculture of epithelial cells that are compatible with ALI culture., (Copyright © 2014 Elsevier Inc. All rights reserved.)