456 results on '"McDonald, Armando G."'
Search Results
2. Physicochemical Characterization of Woody Lignocellulosic Biomass and Charcoal for Bio-energy Heat Generation
3. Wood fiber - sodium silicate mixtures for additive manufacturing of composite materials
4. Evaluation of the Rheological and Mechanical Properties of Mixed Plastic Waste-Based Composites
5. Effect of feedstocks and free-fall pyrolysis on bio-oil and biochar attributes
6. Green solvent extraction and properties characterization of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) biosynthesized by mixed microbial consortia fed fermented dairy manure
7. Long-term outdoor weathering evaluation of wood plastic composites
8. Correction: Wood fiber - sodium silicate mixtures for additive manufacturing of composite materials
9. Cast Film Production with Polyethylene Recycled from a Post-Industrial Printed Multilayer Film by Solvent-Targeted Recovery and Precipitation.
10. Using ATR-FTIR spectra and convolutional neural networks for characterizing mixed plastic waste
11. Effects of Interactions between Polyvinylchloride (Pvc) and High-Density Polyethylene (Hdpe) on Kinetics of Pvc Thermal Decomposition
12. Nanocellulose-Phenol Formaldehyde Adhesive System for Engineered Wood Products: Review
13. Overview and technology opportunities for thermochemically-produced bio-blendstocks
14. Pilot-scale production of poly-3-hydroxybutyrate-co-3-hydroxyvalerate from fermented dairy manure: Process performance, polymer characterization, and scale-up implications
15. Properties of pellets of torrefied U.S. waste blends
16. Characterization of bio-oil and biochar from pyrolysis of waste corrugated cardboard
17. A screw extrusion-based system for additive manufacturing of wood: Sodium silicate thermoset composites
18. Kinetics modeling, thermodynamics and thermal performance assessments of pyrolytic decomposition of Moringa oleifera husk and Delonix regia pod
19. Characterization and comparison of pyrolysis products from fast pyrolysis of commercial Chlorella vulgaris and cultivated microalgae
20. Lodging Variability in Sorghum Stalks Is Dependent on the Biomechanical and Chemical Composition of the Stalk Rinds.
21. Antifungal properties of lauric arginate (LAE) treated wood
22. Characterization and catalytic behavior of EDTA modified silica nanosprings (NS)-supported cobalt catalyst for Fischer-Tropsch CO-hydrogenation
23. Effect of Different Reinforcing Fillers on Properties, Interfacial Compatibility and Weatherability of Wood-plastic Composites
24. An Eco-Friendly System for the Production of Value-Added Materials from Dairy Manure
25. Evaluation of the Mechanical, Thermal and Rheological Properties of Hop, Hemp and Wood Fiber Plastic Composites
26. Fixed Bed Batch Slow Pyrolysis Process for Polystyrene Waste Recycling
27. Video-rate spontaneous Raman imaging
28. Thermo-kinetic, spectroscopic study of brewer’s spent grains and characterisation of their pyrolysis products
29. Steam gasification of a thermally pretreated high lignin corn stover simultaneous saccharification and fermentation digester residue
30. Neuropharmacological profile and chemical analysis of fresh rhizome essential oil of Curcuma longa (turmeric) cultivated in Southwest Nigeria
31. Video-rate Raman-based metabolic imaging by Airy light-sheet illumination and photon-sparse detection
32. Flow, curing and mechanical properties of thermoset resins – wood-fiber blends for potential additive-manufacturing applications
33. Analysis of microbial community variation during the mixed culture fermentation of agricultural peel wastes to produce lactic acid
34. A new technique for cross-sectional density profiling of extruded foods by X-ray scanning
35. Hydrodeoxygenation of pyrolysis oil for hydrocarbon production using nanospring based catalysts
36. Preparation, surface characterization and performance of a Fischer-Tropsch catalyst of cobalt supported on silica nanosprings
37. Valorization of residual bacterial biomass waste after polyhydroxyalkanoate isolation by hydrothermal treatment
38. Multivariate near infrared spectroscopy for predicting polyhydroxybutyrate biosynthesis by mixed microbial consortia cultured on crude glycerol
39. Production and characterization of bio-oil and biochar from the pyrolysis of residual bacterial biomass from a polyhydroxyalkanoate production process
40. Comparative analysis of microbial community of novel lactic acid fermentation inoculated with different undefined mixed cultures
41. Influence of organic loading rate and solid retention time on polyhydroxybutyrate production from hybrid poplar hydrolysates using mixed microbial cultures
42. Correction: Wood fiber - sodium silicate mixtures for additive manufacturing of composite materials
43. Upgrading Mixed Agricultural Plastic and Lignocellulosic Waste to Liquid Fuels by Catalytic Pyrolysis
44. Effect of 3-Hydroxyvalerate Content on Thermal, Mechanical, and Rheological Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Biopolymers Produced from Fermented Dairy Manure
45. Thermo-physical, Chemical and Structural Modifications in Torrefied Biomass Residues
46. Response Surface Optimization of Hot-Water Pretreatment for Enzymatic Hydrolysis of Hybrid Poplar: First Step of Bioconversion of Woody-Biomass to Value-Added Bioproducts
47. Production of fermentable sugars and polyhydroxybutyrate from hybrid poplar: Response surface model optimization of a hot-water pretreatment and subsequent enzymatic hydrolysis
48. Lactic acid production with undefined mixed culture fermentation of potato peel waste
49. Liquefaction of Softwoods and Hardwoods in Supercritical Methanol: A Novel Approach to Bio-Oil Production
50. Wood fiber - sodium silicate mixtures for additive manufacturing of composite materials
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.