Search

Thunnalin Winuprasith,1 Pankaj Koirala,1 David J McClements,2 Piyachai Khomein3 1Institute of Nutrition, Mahidol University, Nakhon Pathom, 73170, Thailand; 2Department of Food Science, University of Massachusetts Amherst, Amherst, MA, 01003, USA; 3Division of Nuclear Medicine, Department of Radiology, Faculty of Medicine, Chulalongkorn University, Bangkok, 10330, ThailandCorrespondence: Piyachai Khomein, Division of Nuclear Medicine, Department of Radiology, Faculty of Medicine, Chulalongkorn University, 1873 Rama 4 Road, Pathumwan, Bangkok, 10330, Thailand, Email Piyachai.kh@chula.ac.thAbstract: Radiopharmaceuticals serve as a major part of nuclear medicine contributing to both diagnosis and treatment of several diseases, especially cancers. Currently, most radiopharmaceuticals are based on small molecules with targeting ability. However, some concerns over their stability or non-specific interactions leading to off-target localization are among the major challenges that need to be overcome. Emulsion technology has great potential for the fabrication of carrier systems for radiopharmaceuticals. It can be used to create particles with different compositions, structures, sizes, and surface characteristics from a wide range of generally recognized as safe (GRAS) materials, which allows their functionality to be tuned for specific applications. In particular, it is possible to carry out surface modifications to introduce targeting and stealth properties, as well as to control the particle dimensions to manipulate diffusion and penetration properties. Moreover, emulsion preparation methods are usually simple, economic, robust, and scalable, which makes them suitable for medical applications. In this review, we highlight the potential of emulsion technology in nuclear medicine for developing targeted radionuclide therapies, for use as radiosensitizers, and for application in radiotracer delivery in gamma imaging techniques.Graphical Abstract: Keywords: emulsions, nanoemulsions, nanoparticles, radiosensitizers, radiopharmaceuticals

The traditional starch-based intelligent freshness labels struggle to maintain long-term structural stability when exposed to moisture. To solve this problem, we prepared composite crosslinked labels using phytic acid for double crosslinking of corn starch and soybean isolate proteins, with anthocyanin serving as the chromogenic dye. The mechanical properties, hydrophobic characteristics, and pH responsivity of these crosslinked labels were assessed in this study. The prepared double-crosslinked labels showed reduced moisture content (15.96%), diminished swelling (147.21%), decreased solubility (28.55%), and minimized water permeability, which suggested that they have enhanced hydrophobicity and densification. The crosslinked labels demonstrated the ability to maintain morphological stability when immersed in water for 12 h. Additionally, the mechanical properties of the crosslinked labels were enhanced without compromising their pH-sensing capabilities, demonstrated a color response visible to the naked eye for milk and coconut water freshness monitoring, suggesting great potential for application in beverages freshness monitoring., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Many probiotics produce functional lipids with health-promoting properties, such as short-chain fatty acids, linoleic acid and omega-3 fatty acids. They have been shown to maintain gut health, strengthen the intestinal barrier, and have anti-inflammatory and antioxidant effects. In this article, we provide an up-to-date review of the various functional lipids produced by probiotics. These probiotics can be incorporated into foods, supplements, or pharmaceuticals to produce these functional lipids in the human colon, or they can be used in industrial biotechnology processes to generate functional lipids, which are then isolated and used as ingredients. We then highlight the different physiological functions for which they may be beneficial to human health, in addition to discussing some of the challenges of incorporating probiotics into commercial products and some potential solutions to address these challenges. Finally, we highlight the importance of testing the efficacy and safety of the new generation of probiotic-enhanced products, as well as the great potential for the marketization of related products., Competing Interests: Declaration of competing interest No conflicts of interest are declared for any of the authors., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Amyloid-like fibrils have a relatively high specific surface area, which makes them suitable as absorbents. In this study, we prepared absorbent composite aerogels from whey protein isolate fibril (WPIF) and calcium alginate (CA). The impact of protein fibrillation time (4-24 h) on the adsorption properties of these aerogels was assessed, as this influences the nature of the WPIFs formed. Fourier transform infrared spectroscopy analysis indicated that hydrogen bonding, hydrophobic interactions, and electrostatic interactions were the main molecular interactions in the composite aerogels. Then, the adsorption properties of the aerogels were investigated using crystal violet as a model compound. The adsorption properties of all composite aerogels were significantly improved compared to CA aerogels, which was mainly attributed to the numerous functional groups of the surfaces of the WPIFs, as well as the rougher surface topology of the composite aerogels. The adsorption capacity of the composite aerogels first increased and then decreased with increasing fibrillation time, with 8 h fibrillation leading to the largest adsorption capacity (1886.11 mg/g). Thioflavin T fluorescence, atomic force microscopy, light extinction, average particle size, and zeta potential analysis indicated that the high fibril content, mature fibril morphology, large number of available functional groups on the surface, and relatively low zeta potential of WPIF8 might be the main reasons. Adsorption kinetics and isothermal adsorption profile analysis suggested that monolayer adsorption occurred through chemical adsorption processes. The edible aerogel with high adsorption properties developed in this work has potential application in food and biomedical fields.

The mass transport effect of aqueous micelles on antioxidants and oxidation products in emulsions may alter the rate, degree, and pathway of lipid oxidation. In this study, the dynamic mass transport of oxidation products and endogenous tocopherol during storage at different micelle concentrations was monitored by UV-vis spectrophotometry and high-performance liquid chromatography. Furthermore, the microlocalization of tocopherol in micelles was investigated using 1 H nuclear magnetic resonance and nuclear Overhauser effect spectroscopy, fluorescence measurements, and molecular dynamics simulation. It was demonstrated that high-concentration micelles enhanced the emulsion stability by promoting the mass transport of hydroperoxides and endogenous antioxidants. The enhancement of micelles was a superposition effect of concentration, interaction sites, and binding force between tocopherols and Tween 20 molecules. Tween 20 concentration-induced favorable changes of microlocalization of tocopherol and dynamic mass transport demonstrated a new integrated perspective to control lipid oxidation.

The effects of lecithin addition on the properties of konjac glucomannan (KGM) hydrogels prepared by controlled heating were investigated. Weak hydrogels were formed at 1 % KGM, which contained relatively thick strands. The shear viscosity and shear modulus of the hydrogels increased with increasing KGM concentration. The pure KGM hydrogels exhibited relatively poor boundary lubrication at all polysaccharide concentrations studied. The inclusion of lecithin (0.001 % to 0.20 %) in the KGM hydrogels appreciably altered their rheological properties, which could be modulated by varying the lecithin/KGM ratio. Microstructural analysis showed that lecithin caused a substantial restructuring of the strands in the hydrogel network. Lecithin was also found to be a highly effective lubricant in the KGM hydrogels. Incorporation of trace amounts of lecithin led to a significant improvement in the lubricating properties of the KGM hydrogels, especially boundary lubrication. Fourier transform infrared (FTIR) and differential canning calorimetry (DSC) analyses provided information about the molecular interactions between the lecithin and KGM molecules. The ability of lecithin to increase the lubricating performance of the KGM hydrogels was mainly attributed to the adsorption of phospholipid-biopolymer complexes onto solid surfaces, which reduced the friction between them., Competing Interests: Declaration of competing interest The authors declare that they have no competing financial interests or personal relationships that could influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

There is a pressing need for sustainable sources of proteins to address the escalating food demands of the expanding global population, without damaging the environment. Lentil proteins offer a more sustainable alternative to animal-derived proteins (such as those from meat, fish, eggs, or milk). They are abundant, affordable, protein rich, nutritious, and functional, which makes them highly appealing as ingredients in the food, personal care, cosmetics, pharmaceutical and other industries. In this article, the chemical composition, nutritional value, and techno-functional properties of lentil proteins are reviewed. Then, recent advances on the extraction, purification, and modification of lentil proteins are summarized. Hurdles to the widespread utilization of lentil proteins in the food industry are highlighted, along with potential strategies to surmount these challenges. Finally, the potential applications of lentil protein in foods and beverages are discussed. The intention of this article is to offer an up-to-date overview of research on lentil proteins, addressing gaps in the knowledge related to their potential nutritional benefits and functional advantages for application within the food industry. This includes exploring the utilization of lentil proteins as nanocarriers for bioactive compounds, emulsifiers, edible inks for 3D food printing, meat analogs, and components of biodegradable packaging., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Polyphenols have a variety of physiological activities, including antioxidant, antimicrobial, and anti-inflammatory properties. However, their applications are often limited because due to the instability of polyphenols. Encapsulation technologies can be employed to overcome these problems and increase the utilization of polyphenols. In this article, the utilization of protein-based nanoparticles for encapsulating polyphenols is reviewed due to their good biocompatibility, biodegradability, and functional attributes. Initially, the various kinds of animal and plant proteins available for forming protein nanoparticles are discussed, as well as the fabrication methods that can be used to assemble these nanoparticles. The molecular interaction mechanisms between proteins and polyphenols are then summarized. Applications of protein-based nanoparticles for encapsulating polyphenols are then discussed, including as nutrient delivery systems, in food packaging materials, and in the creation of functional foods. Finally, areas where further research is need on the development, characterization, and application of protein-based polyphenol-loaded nanoparticles are highlighted.

This study aimed to upcycle a byproduct of the edible oil industry, cold-pressed nettle seed meal (CPNSM), into a plant-based emulsifier, thereby increasing the sustainability of the food system. The protein content of the nettle seed protein (NSP) powder was 48.3% with glutamic acid (16.6%), asparagine (10.7%), and arginine (9.7%) being the major amino acids. NSPs had a denaturation temperature of 66.6 °C and an isoelectric point of pH 4.3. They could be used as emulsifiers to form highly viscous coarse corn oil-in-water emulsions (10% oil, 4% NSP). Nevertheless, 10-fold diluted emulsions exhibited rapid creaming under different pH (2-9), salt (0-500 mM NaCl) and temperature (>40 °C) conditions, but they were relatively stable to aggregation. Our findings suggest that NSPs could be used as emulsifiers in highly viscous or gelled foods, like dressings, sauces, egg, cheese, or meat analogs., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Background: Flavonoids, found in common vegetables and fruits, have health benefits that are often limited by their low bioavailability. Excipient emulsions provide an effective strategy to overcome these obstacles. However, the nature of the emulsifier used to formulate excipient emulsions and the chemical structure of the flavonoids both affect the bioaccessibility of the flavonoids., Results: The purpose of this study was to investigate the impact of the interfacial properties of excipient emulsions on the in vitro gastrointestinal fate of representative structural flavonoids (quercetin, kaempferol, and apigenin) through the INFOGEST method. Tween 80 (TW80) (a nonionic surfactant) was more effective at reducing the oil-water interfacial tension than whey protein isolate (WPI) (a protein-based emulsifier) or octenyl succinic anhydride (OSA)-modified starch (MS) (a polysaccharide-based emulsifier). Moreover, TW80 created excipient emulsions with smaller oil droplets, which were more resistant to oral and gastric conditions. The WPI-emulsions underwent severe flocculation in the gastric phase, leading to an appreciable increase in particle size (from 220 to 3000 nm). The TW80-coated oil droplets were more digestible than WPI- or MS-coated ones. This was attributed to the larger lipid surface area for lipase attachment. The bioaccessibility of quercetin, kaempferol, and apigenin was also affected by emulsifiers: TW 80 (25% to 45%) > WPI (14% to 29%) ≈ MS (15% to 25%). Flavonoid bioaccessibility appeared to be related to their molecular properties., Conclusion: This study provides guidance for the design of effective excipient emulsions to enhance the bioavailability of flavonoids. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

This study aimed to develop microcapsules with wheat gluten-coated oil droplets to enhance the oxidation stability and control the digestibility of flaxseed oil. The microcapsules were fabricated using a three-step procedure: (i) flaxseed oil was homogenized with an alkaline gluten solution to form oil-in-water emulsions containing small gluten-coated oil droplets (320-400 nm); (ii) the pH of these emulsions was then neutralized to facilitate the deposition of gluten around the oil droplets, thereby forming a thick layer; (iii) a flaxseed oil microcapsule powder was then prepared by spray drying. During the microcapsule formation, intermolecular interactions, including hydrophobic interactions and hydrogen bonds, were involved in the coacervation of gluten at the emulsion surface. The resultant microcapsules with a multiple-core structure had external diameters of 4-26 µm and encapsulation efficiencies of 90%-94%. The microencapsulated oil powders contained a relatively high flaxseed oil content (60%-80%). Among them, the sample with 60% oil content demonstrated the best stability in resisting oil droplet coalescence; thus, it exhibited a higher lipolysis rate and extent during simulated gastrointestinal digestion. A 30-day accelerated storage study showed that encapsulation of the flaxseed oil improved its resistance to oxidation. These findings suggest that the pH-deposition method can successfully produce microencapsulated polyunsaturated lipids using all plant-derived ingredients, which may facilitate their use in new plant-based foods through a green and sustainable approach., (© 2024 Institute of Food Technologists.)

Porous starch granules (PSGs) are promising biomaterials for the encapsulation, protection, and delivery of bioactive ingredients. In this study, a lipase treatment was first used to generate pores in native starch granules, and then α-amylase was used to enlarge these pores. Electron and fluorescence microscopy analysis showed that the lipase treatment exposed the starch molecules located below the lipid-rich regions on the starch granule surfaces, which increased the swelling of the granules in aqueous solutions. Moreover, lipase treatment caused the surrounding areas to become more loosely packed, which facilitated subsequent starch hydrolysis and the formation of large internal cavities. Fourier transform infrared spectroscopy, X-ray diffraction, and thermogravimetric analyses provided further insights, these methods showed that the short-range order, long-range order, and thermal stability of the PSGs was enhanced by the sequential lipase-amylase modification. PSGs were highly resistant to amylase digestion and had strong adsorption capacity to hydrophobic and hydrophilic substances. This study shows that a combined lipase-amylase treatment can be used to fabricate PSGs, which may have health benefits due to their low digestibility and ability to encapsulate bioactive agents. These PSGs may therefore be suitable for application in the functional food, supplement, personal care, and pharmaceutical industries.

Plant proteins are increasingly being used in the food industry due to their sustainability. They can be isolated from food industry waste and converted into value-added ingredients, promoting a more circular economy. In this study, ultrasound-assisted alkaline extraction (UAAE) was optimized to maximize the extraction yield and purity of protein ingredients from grapeseeds. Grapeseed protein was extracted using UAAE under different pH (9-11), temperature (20-50 °C), sonication time (15-45 min), and solid/solvent ratio (10-20 mL/g) conditions. The structural and functional attributes of grapeseed protein and its major fractions (albumins and glutelins) were investigated and compared. The albumin fractions had higher solubilities, emulsifying properties, and in vitro digestibilities but lower fluid binding capacities and thermal stability than the UAAE and glutelin fraction. These findings have the potential to boost our understanding of the structural and functional characteristics of grapeseed proteins, thereby increasing their potential applications in the food and other industries., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

This study developed a novel method for the facile, green and efficient fabrication of highly crystalline and heat-resistant starch via recrystallization with high concentrations of debranched starch (DBS), which greatly reduced the complexity and period compared to conventional preparation methods. The structural, thermal, and digestive properties of recrystallized DBS obtained from different concentrations (0-50 %) have been systematically investigated. For instance, the peak melting temperature of recrystallized DBS increased from around 77.8 °C to 114.7 °C with increasing DBS concentration. Moreover, the crystallinity of the recrystallized DBS increased from around 23.5 % to 73.6 % when the DBS concentration was raised. In addition, the resistant starch content of the recrystallized DBS increased from around 30.8 % to 72.1 % as the DBS concentration increased. These results show that the DBS concentration in water during recrystallization plays a critical role in determining the molecular, physicochemical, and digestion properties of DBS, which may be an economical and effective method for large-scale production of highly crystalline starch and provides a new method for preparing heat-resistant type-3 resistant starch, which can be used in low glycemic index foods designed to prevent diabetes and obesity., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Background: Cationic calcium ions can crosslink anionic alginate and pectin molecules. It was hypothesized that calcium crosslinking would improve the stability and functionality of biopolymer nanoparticles consisting of zein cores coated by alginate-pectin shells. The effects of calcium ion addition on the structural, physicochemical, and gastrointestinal properties of quercetin-loaded zein/alginate-pectin nanoparticles were therefore investigated., Results: The nanoparticles remained stable to aggregation at calcium ion concentrations of 9 mmol/L or less but aggregated and sedimented at higher concentrations. Calcium ion reinforcement increased the particle dispersion stability even at NaCl concentrations up to 1.4 molL -1 . The presence of the calcium ions also reduced quercetin release during the early stages of simulated gastrointestinal digestion but increased its release during the later stages. The relatively high release (56.1%) of quercetin from the calcium-reinforced nanoparticles after digestion resulted in higher intracellular antioxidant activities. The pharmacokinetics of the encapsulated quercetin was measured after its oral administration to rats. The maximal concentration (C max ) of quercetin in rat plasma for calcium-reinforced nanoparticles was 6.1% higher than non-reinforced nanoparticles; the half-life (t 1/2 ) increased by 17.5%, and the mean retention time (MRT) was 10.0% higher (P < 0.05)., Conclusion: These results suggest that calcium ion addition improved the performance and bioavailability of nutraceutical-loaded biopolymer nanoparticles. This might find application in the food and beverage industry. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

This study investigated the impact of water-soluble substances on Ostwald ripening in emulsions stabilized by surfactants with different head groups (Brij S20 and Tween 60). Adding ≥20% (w/w) corn oil to the oil phase effectively inhibited Ostwald ripening of n-decane emulsions due to compositional ripening. The presence of glucose, maltose, or glycerol in the aqueous phase of the emulsions decreased the Ostwald ripening rate, regardless of emulsifier type. However, the impact of propylene glycol depended on emulsifier type, accelerating Ostwald ripening in Brij S20-stabilized emulsions but having little effect in Tween 60-stabilized emulsions. This effect was mainly attributed to the ability of propylene glycol to alter interfacial characteristics. When emulsions were fabricated with a mixture of n-decane and corn oil, glucose and maltose were still effective in inhibiting Ostwald ripening, but glycerol lost its ability. These results have important implications for formulating emulsion-based delivery systems with enhanced shelf life., (© 2024. The Author(s).)

Bioactive food ingredients contribute to the promotion and maintenance of human health and wellbeing. However, these functional ingredients often exhibit low biopotency after food processing or gastrointestinal transit. Well-designed oral delivery systems can increase the ability of bioactive food ingredients to resist harsh environments inside and outside the human body, as well as allow for controlled or triggered release of bioactives to specific sites in the gastrointestinal tract or other tissues and organs. This review presents the characteristics of common bioactive food ingredients and then highlights the barriers to their biopotency. It also discusses various oral delivery strategies and carrier types that can be used to overcome these biopotency barriers, with a focus on recent advances in the field. Additionally, the advantages and disadvantages of different delivery strategies are highlighted. Finally, the current challenges facing the development of food-grade oral delivery systems are addressed, and areas where future research can lead to new advances and industrial applications of these systems are proposed., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Three nanoparticles were fabricated for the co-delivery of quercetin and resveratrol. Nanoparticles consisted of a zein and carboxymethyl cellulose assembled using antisolvent precipitation/layer-by-layer deposition method. Nanoparticles contained quercetin in the core and resveratrol in the shell, resveratrol in the core and quercetin in the shell or both quercetin and resveratrol in the core. The particle sizes of nanoparticles were 280.4, 214.8, and 181.8 nm, respectively. Zeta-potential was about -50 mV and PDI was about 0.3. The different positions of polyphenol distribution nanoparticles could reduce the competition between the two polyphenols, the encapsulation rate, loading rate and storage stability reached up to 91.7 %, 5.37 % and 97.1 %, respectively. FT-IR showed that hydrophobic and electrostatic interactions were the main driving forces of nanoparticle assembly. XRD showed that two polyphenols were successfully encapsulated in nanoparticles. TGA showed that distributing the nanoparticles in different layers would enhance thermal stability. TEM and SEM showed that polysaccharides attached to the surface of nanoparticles formed a core-shell structure with uniform particle size. All three nanoparticles could release two polyphenols slowly in simulated gastrointestinal digestion, Korsmeyer-Peppas was the most suitable kinetic release model. Therefore, biopolymer-based nanocarriers can be created to enhance the loading, stability, and bioaccessibility of co-encapsulated nutraceuticals., Competing Interests: Declaration of competing interest We wish to confirm that there are no known conflicts of interest associated with this publication and there has been no significant financial support for this work that could have influenced its outcome. We confirm that the manuscript has been read and approved by all named authors and that there are no other persons who satisfied the criteria for authorship but are not listed. We further confirm that the order of authors listed in the manuscript has been approved by all of us. We confirm that we have given due consideration to the protection of intellectual property associated with this work and that there are no impediments to publication, including the timing of publication, with respect to intellectual property. In so doing we confirm that we have followed the regulations of our institutions concerning intellectual property., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Ciprofloxacin (CIP) is one of the most widely used antibiotics to treat bacterial infections. Consequently, there is concern that it may contaminate water resources due to its high usage level. It is therefore necessary to monitor, trace, and reduce exposure to these antibiotic residues. In the current study, the extraction of CIP from water was performed using a green adsorbent material based on cellulose/polyvinyl alcohol (PVA) decorated with mixed metal oxides (MMO). This cellulose/MMO/PVA adsorbent was synthesized using a simple sol-gel method. The prepared adsorbent materials were then characterized using a range of methods, including scanning electron microscopy, energy-dispersive X-ray spectroscopy, gas adsorption analysis, X-ray diffraction, and Fourier Transform infrared. The impact of pH, adsorbent dose, contact time, and CIP concentration on ciprofloxacin extraction were examined. The equilibrium and kinetic adsorption data were well described using the Freundlich model (R 2  = 0.965). The optimum conditions for CIP adsorption were: pH = 4.5; adsorbent dosage = 0.55 g·L -1 ; contact time = 83 min; and initial CIP concentration = 2 mg·L -1 . The adsorption capacity of the cellulose/MMO/PVA adsorbent for CIP removal was ∼19 mg·g -1 (CIP removal = 86.48 %). This study shows that cellulose/MMO/PVA adsorbents have potential for removing contaminants from aqueous environments., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Biopolymer hydrogels have a broad range of applications as soft materials in a variety of commercial products, including foods, cosmetics, agrochemicals, personal care products, pharmaceuticals, and biomedical products. They consist of a network of entangled or crosslinked biopolymer molecules that traps relatively large quantities of water and provides semi-solid properties, like viscoelasticity or plasticity. Composite biopolymer hydrogels contain inclusions (fillers) to enhance their functional properties, including solid particles, liquid droplets, gas bubbles, nanofibers, or biological cells. These fillers vary in their composition, size, shape, rheology, and surface properties, which influences their impact on the rheological properties of the biopolymer hydrogels. In this article, the various types of biopolymers used to fabricate composite hydrogels are reviewed, with an emphasis on edible proteins and polysaccharides from sustainable sources, such as plants, algae, or microbial fermentation. The different kinds of gelling mechanism exhibited by these biopolymers are then discussed, including heat-, cold-, ion-, pH-, enzyme-, and pressure-set mechanisms. The different ways that biopolymer molecules can organize themselves in single and mixed biopolymer hydrogels are then highlighted, including polymeric, particulate, interpenetrating, phase-separated, and co-gelling systems. The impacts of incorporating fillers on the rheological properties of composite biopolymer hydrogels are then discussed, including mathematical models that have been developed to describe these effects. Finally, potential applications of composite biopolymer hydrogels are presented, including as delivery systems, packaging materials, artificial tissues, wound healing materials, meat analogs, filters, and adsorbents. The information provided in this article is intended to stimulate further research into the development and application of composite biopolymer hydrogels., Competing Interests: Declaration of competing interest Professor McClements serves on the scientific advisory of several plant-based food companies and provides consulting to the food industry., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, based on the discovery of thymol/glycerol monolaurate (GML) eutectic solvent, we studied the effect of GML as a multi-functional component (ripening inhibitor and antibacterial agent) on the formation, stability and antibacterial activity of eutectic nanoemulsions, and investigated the preservation of nanoemulsion in fresh pork. These results indicated that the formation of eutectic solvent was due to the hydrogen bonding between thymol and GML in the molten state. And eutectic nanoemulsions prepared with medium GML concentrations (20%, 40%, and 60%) of eutectic solvents as oil phases had small droplet diameters (<150 nm), exhibited sustained-release characteristics, and had excellent physicochemical stability. Moreover, the addition of GML enhanced the antibacterial activity of thymol nanoemulsion against S. aureus. as seen by their ability to inhibit affect formation more effectively. Treatment of fresh pork with optimized eutectic nanoemulsions (40% thymol/60% GML) extended its shelf life during refrigeration, which was mainly attributed to the ability of the encapsulated essential oil to inhibit microbial growth and lipid oxidation. These results provide a novel strategy to control Ostwald ripening and maintain the high antibacterial activity of thymol in nanoemulsion-based delivery systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Many plant proteins are amphiphilic molecules that can adsorb to air-water interfaces and form protective coatings around gas bubbles. In this study, the composition, structure, physicochemical properties, air-water interfacial properties, and foaming properties of 16 plant and microbial proteins were characterized. We found a correlation between the composition, structure, physicochemical properties, and foaming properties of the proteins. The foaming capacity of them showed a highly significant positive correlation (p ≤ 0.01) with their foaming stability, α-helix content, surface hydrophobicity, and free sulfhydryl content. The foaming capacity and foaming stability showed highly significant negative correlations with disulfide bond content (p ≤ 0.01). We found wheat gluten protein (WGP) and mung bean protein (MBP) had higher foaming capacity (102.67 ± 8.08 % and 89.33 ± 4.72 %), which could be attributed to higher surface hydrophobicity (179.68 ± 1.40 and 130.28 ± 1.41) and larger contact angle (82.369 ± 0.016° and 82.949 ± 0.228°)., Competing Interests: Declaration of competing interest We declare that we have no financial and personal relationships with other people or organizations that can inappropriately influence our work, there is no professional or other personal interest of any nature or kind in any product, service and/or company that could be construed as influencing the position presented in, or the review of, the manuscript entitled, “Interfacial and Foaming Properties of Plant and Microbial Proteins: Comparison of Structure-Function Behavior of Different Proteins”., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The stability of quercetin remains a challenge for their application in industrial food production. In order to solve this shortcoming, zein-tannic acid covalent complex was prepared. Fourier transform infrared spectroscopy demonstrated the formation of CN bond between zein and tannic acid. Quercetin loaded nanoparticles (QZTC) were prepared by zein-tannic acid complex and carboxymethyl chitosan by anti-solvent co-precipitation and pH migration method. The structure of the nanoparticles was characterized and the effects of tannic acid modification and carboxymethyl chitosan addition on the encapsulation efficiency, oxidation resistance, antibacterial property, environmental stability and microstructure of the nanoparticles were studied. The results showed that compared with zein nanoparticles, QZTC had higher encapsulation rate, smaller and more uniform spherical microstructure. Compared with free quercetin and the other two nanoparticles, QZTC showed higher light, heat, storage stability, antioxidant and antibacterial abilities (p < 0.05). It was also found that the improvement of stability mainly depended on the formation of CN covalent bond, hydrogen bond, electrostatic interaction and hydrophobic interaction between components. This study provides new ideas for improving the environmental stability, antioxidant and antibacterial properties of quercetin and for developing nanoparticles that can be used in food processing., Competing Interests: Declaration of competing interest No conflicts of interest are declared for any of the authors., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The development and investigation of innovative nanomaterials stand poised to advance technological progress and meet the contemporary demand for efficient, environmentally friendly, and intelligent products. Hollow nanostructures (HNS), characterized by their hollow architecture, exhibit diverse properties such as expansive specific surface area, low density, high drug-carrying capacity, and customizable structures. These elaborated structures, encompass nanospheres, nanoboxes, rings, cubes, and nanowires, have wide-ranging applications in biomedicine, materials chemistry, food industry, and environmental science. Herein, HNS and their cutting-edge synthesis methods, including solvothermal methods, liquid-interface assembly methods, and the self-templating methods are discussed in-depth. Meanwhile, the potential applications of HNS in food and biomedicine such as food packing, biosensor, and drug delivery over the past three years are summarized, together with a prospective view of future research directions and challenges. This review will offer new insights into designing next generation of hollow nanomaterials for food and biomedicine applications.

During home cooking or industrial food processing operations, starch granules usually undergo a process known as gelatinization. The starch gelatinization degree (DG) influences the structural organization and properties of starch, which in turn alters the physicochemical, organoleptic, and gastrointestinal properties of starchy foods. This review summarizes methods for measuring DG, as well as the impact of DG on the starch structure, properties, and applications. Enzymatic digestion, iodine colorimetry, and differential scanning calorimetry are the most common methods for evaluating the DG. As the DG increases, the structural organization of the molecules within starch granules is progressively disrupted, the particle size of the granules is altered due to swelling and then disruption, the crystallinity is decreased, the molecular weight is reduced, and the starch-lipid complexes are formed. The impact of DG on the starch structure and properties depends on the processing method, operating conditions, and starch source. The starch DG affects the quality of many foods, including baked goods, fried foods, alcoholic beverages, emulsified foods, and edible inks. Thus, a better understanding of the changes in starch structure and function caused by gelatinization could facilitate the development of foods with novel or improved properties., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Different methods of starch modification have been proposed to broaden its application. In this study, the effects of ternary mixtures of natural crosslinking agents: chitosan-betaine-vanillin and gelatin-betaine-vanillin on the properties of pea starch were explored. These combinations of substances were selected because they have complementary crosslinking mechanisms. The effects of the ternary crosslinker mixtures on the gelatinization, mechanical properties, thermal stability, and microstructure of pea starch were compared. Both combinations of crosslinkers enhanced the gelatinization viscosity, viscoelasticity, gel hardness, and thermal stability of the pea starch, by an amount that depended on the ratio of the different components in the ternary mixtures. In all cases, the crystal structure of the starch granules disappeared after gelatinization. The modified starch had a more compact and uniform microstructure than the non-modified version, especially when it was crosslinked by vanillin, gelatin, and betaine. The improvement in the gelation properties of the starch were primarily attributed to hydrogen bonding, electrostatic attraction, and Schiff base crosslinking of the various components present. Gelatin enhanced the gel strength more than chitosan, which was probably because of greater hydrogen bonding. Our findings suggest that the properties of starch can be enhanced by adding ternary mixtures of natural crosslinkers., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The potential of using emulsion gels stabilized by binary plant protein nanoparticle mixtures for the encapsulation and delivery of lipophilic nutraceuticals was evaluated. The particle characteristics, physical stability, water diffusivity, microrheology, large amplitude oscillating shear (LAOS) properties, and in vitro digestion of emulsion gels prepared by different ratios of hydrolyzed rice glutelin fibrils (HRGFs) and pea protein nanoparticle (PNP) were characterized. The emulsion gel with P/H = 2:1 (0.84 μm) exhibited the best storage stability and freeze-thaw stability, as seen by the smaller oil droplet size (1.02 and 1.42 μm, respectively). Low-field pulsed NMR indicated that the majority of water in samples was highly mobile. All the samples were predominantly elastic-like materials. The P/H 2:1 emulsion gel had the lowest FI value (6.21 × 10 -4  Hz), the highest MVI value (5.57 s/nm 2 ), G'/ G″ values and enclosed area, showing that it had denser 3D network structures, higher stiffness values, and a high sensitivity to changes in strain. Additionally, P/H 2:1 emulsion gel had a relatively high lipid digestibility (96.1 %), curcumin bioaccessibility (58.9 %), and curcumin stability (94.2 %). This study showed that emulsion gels stabilized by binary protein nanoparticle mixtures (PNP/HRGF) have potential as edible delivery systems for lipophilic nutraceuticals., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In this study, a combination of whey protein (hydrophilic coating) and polydopamine (crosslinking agent) was used to improve the stability and functionality of quercetin-loaded zein nanoparticles. There are two key benefits of the core-shell nanoparticles formed. First, the ability of the polydopamine to bind to both zein and whey protein facilitates the formation of a stable core-shell structure, thereby protecting quercetin from any pro-oxidants in the aqueous surroundings. Second, neutral and hydrophilic whey proteins were used for the surface coating of the nanoparticles to further enhance the sustained and slow release of quercetin, facilitating its sustained release into the body at a slow and steady rate. The results of this study will promote the innovative development of precise nutritional delivery systems for zein and provide a theoretical basis for the design and development of dietary supplements based on hydrophobic food nutrient molecules., Competing Interests: Declaration of competing interest No conflicts of interest are declared for any of the authors., (Copyright © 2023. Published by Elsevier Ltd.)

The structure, properties, as well as the oil absorption characteristics of wheat flour (WF) treated with varying concentrations of transglutaminase (TG) (0 U/g ∼ 50 U/g) were characterized. The content of free amino groups in WF modified by TG (TG-WF) decreased and protein aggregated. The isopeptide bonds and disulfide bonds played important roles in protein crosslinking. The thermal stability, the peak viscosity after gelatinization and protein secondary structure stability of TG-WF were improved. In addition, the oil absorption and surface oil content of TG-WF after frying were reduced. TG enhanced the protein-protein interactions in WF, so that protein played barrier roles in the process of high-temperature frying, protecting the starch particles covered by them from the infiltration of oil, thus reducing the oil absorption of TG-WF during frying. Among them, the oil content of TG-WF-30 U/g after frying was the lowest, which decreased by 10.73 % compared with the control group., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Herein, the effects of temperature cycling (4 °C/50 °C/100 °C) on the recrystallization, physicochemical properties, and digestibility of debranched starch (DBS) were investigated. Temperature cycling involved heating DBS to 100 °C to dissociate weak heat-sensitive crystalline structures and cooling to 4 °C to induce the rapid growth of crystal nuclei, followed by maintaining the temperature at 50 °C to promote orderly crystalline growth. This procedure aimed to increase the degree of crystalline structure in recrystallized DBS, thereby resulting in DBS that was heat- and digestion-resistant. Temperature cycling increased the dissociation temperature of DBS, and temperatures of up to 114.8 °C were attained after five cycling times. With increasing cycles, the crystalline structure of DBS transitioned from B-type to the more robust and compact A-type, and the crystallinity increased to ∼81.9 % (after seven cycles). Raman and Fourier transform infrared (FTIR) spectra indicated that temperature cycling enhanced the short-range ordered structure of DBS. Moreover, in vitro digestion experiments demonstrated that the resistant starch content of DBS increased to ∼61.9 % after eight cycles. To summarize, this study demonstrated a green and effective method for preparing heat-and digestion-resistant recrystallized DBS, which can be used for developing dietary supplements and low gastrointestinal staples., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The low bioavailability of polyphenolic compounds due to poor solubility and stability is a major challenge. Encapsulation of polyphenols in zein-based composite nanoparticles can improve the water dispersion, stability, targeted delivery, and controlled release of polyphenols in the gastrointestinal tract. In this study, we investigated the fluorescence properties, bioactivity, and microstructural characteristics of polyphenols during digestion, revealing that zein nanoparticles protect polyphenols from gastric degradation and promote their sustained release in the small intestine. The effects of different ionic species and salt ion concentrations on the digestive properties of polyphenol complex delivery systems have also been explored. In addition, the formation of "protein corona" structures during digestion may affect bioavailability. These findings highlight the potential of nanoparticle formulations to improve polyphenol stability and absorption. The results of this study may provide new insights and references for the study of polyphenol bioavailability enhancement., Competing Interests: Declaration of competing interest All authors have read this manuscript. None of the material related to this manuscript has been published or is under consideration for publication elsewhere, including the Internet., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This study aims to investigate the effects of interfacial layer composition and structure on the formation, physicochemical properties and stability of Pickering emulsions. Interfacial layers were formed using pea protein isolate (PPI), PPI microgel particles (PPIMP), a mixture of PPIMP and sodium alginate (PPIMP-SA), or PPIMP-SA conjugate. The encapsulation and protective effects on different hydrophobic bioactives were then evaluated within these Pickering emulsions. The results demonstrated that the PPIMP-SA conjugate formed thick and robust interfacial layers around the oil droplet surfaces, which increased the resistance of the emulsion to coalescence, creaming, and environmental stresses, including heating, light exposure, and freezing-thawing cycle. Additionally, the emulsion stabilized by the PPIMP-SA conjugate significantly improved the photothermal stability of hydrophobic bioactives, retaining a higher percentage of their original content compared to those in non-encapsulated forms. Overall, the novel protein microgels and the conjugate developed in this study have great potential for improving the physicochemical stability of emulsified foods., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Hickory is an abundant source of phenolic compounds that exhibit a diverse range of bioactivities. In this study, phenolic compounds were extracted and purified from hickory green husk (HG), hickory nutshell (HN), and hickory seed coat (HS) using solid-phase extraction and ultrasonication (SPE-US). The effects of the SPE-US treatment on the structure and properties of the phenolic compounds were then investigated, including their composition, antioxidant activity, and antimicrobial activity. The dominant phenolic substances in the different extracts after SPE-US treatment were: ellagic acid and trans ferulic acid (HS); ellagic acid and sinapic acid (HN); and rutin (HG). The HS-SPE-US 1 extract exhibited the highest total polyphenol content (416 ± 11 mg GAE/g DW), total flavonoid content (47.51 ± 0.68 mg RE/g DW), Fe 3+ reduction ability (74.2 ± 1.0 mmol Fe 2+ /g DW), radical (DPPH and ABTS) scavenging ability, and antimicrobial activity against Staphylococcus aureus., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Pea protein isolate (PPI)-hyaluronic acid (HA)-tannic acid (TA) ternary complexes were assembled using non-covalent interactions, their potential application in 3D printing and delivery of curcumin were investigated. As the HA-to-TA ratio in the complexes changed from 1:0 to 0:1, the oil-water interfacial tension first decreased and then increased, and the secondary structure of the proteins changed. The composition of the complexes (HA-to-TA ratio) was optimized to produce high internal phase emulsions (HIPEs) containing small uniform oil droplets with good storage and thermal stability. When the HA to TA ratio is 7:1 (P-H 7 -T 1 ), HIPEs exhibited better viscosity, viscoelasticity, and thixotropy, which contributed to its preferable 3D printing. Moreover, curcumin-loaded HIPEs stabilized by P-H 7 -T 1 showed a high lipid digestibility (≈101%) and curcumin bioaccessibility (≈79%). In summary, the PPI-HA-TA-stabilized HIPEs have good potential to be 3D-printable materials that could be loaded with bioactive components., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Background: Plant proteins are being increasingly utilized as functional ingredients in foods because of their potential health, sustainability, and environmental benefits. However, their functionality is often worse than the synthetic or animal-derived ingredients they are meant to replace. The functional performance of plant proteins can be improved by conjugating them with polyphenols. In this study, the formation and stability of oil-in-water emulsions prepared using faba bean protein-grape leaf polyphenol (FP-GLP) conjugates as emulsifiers. Initially, FP-GLP conjugates were formed using an ultrasound-assisted alkali treatment. Then, corn oil-in-water emulsions were prepared using high-intensity sonication (60% amplitude, 10 min) and the impacts of conjugate concentration, pH, ionic strength, freezing-thawing, and heating on their physicochemical properties and stability were determined., Results: Microscopy and light scattering analysis showed that oil-in-water emulsions containing small oil droplets could be formed at conjugate concentrations of 2% and higher. The addition of salt reduced the electrostatic repulsion between the droplets, which increased their susceptibility to aggregation. Indeed, appreciable droplet aggregation was observed at ≥ 50 mmol/L sodium chloride. The freeze-thaw stability of emulsions prepared with protein-polyphenol conjugates was better than those prepared using the proteins alone. In addition, the emulsions stabilized by the conjugates had a higher viscosity than those prepared by proteins alone., Conclusion: This study showed that FP-GLP conjugates are effective plant-based emulsifiers for forming and stabilizing oil-in-water emulsions. Indeed, emulsions formed using these conjugates showed improved resistance to pH changes, heating, freezing, and salt addition. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry., (© 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.)

Food waste occurs frequently worldwide, though hunger and malnutrition issues have received global attention. Short-term spoilage of perishable foods causes a significant proportion of food waste. Developing simple, green, and low-cost strategies to preserve the freshness of perishable foods is important to address this issue and improving food safety. By using strawberries as the model perishable fruit, this study reported a pectin/carboxy methyl starch sodium (PC) based coating using epigallocatechin gallate-loaded eggshell powder (ES@EGCG) as the functional fillers. In comparison to PC coating, the PC-ES@EGCG coating displayed much-enhanced performance, such as enhanced mechanical (2 folds) and barrier (water vapor & oxygen) properties. This composite coating reduced the weight loss of strawberries from over 60% to around 30% after 7-day storage. Coated strawberries exhibit better freshness retention, which achieves the purpose of preserving strawberries during storage. This study provided a cost-effective and eco-friendly coating strategy for reducing food waste., Competing Interests: Declaration of competing interest The authors report no declarations of interest., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Reducing salt intake without affecting the saltiness perception remains a great challenge for the food industry. Herein, the demulsification of water droplets and air bubbles was controlled to modulate the release of sodium from oleogel-stabilized water-in-oil emulsions (OGEs) stabilized by monoglyceride crystals. The effect of monoglycerides with carbon chain length (glycerol monolaurate-GML, glyceryl monostearate-GMS, and glycerol monopalmitate-GMP) and homogenization methods (hand-shaking or high-speed blender) on sodium release and saltiness was investigated by in vitro and in vivo oral processing tests. Milky-white stable emulsions were formed with both water droplets and air bubbles dispersing in the oil phase, regardless of the selected homogenization methods. Air bubbles were more unstable than water droplets during oral digestion. GML OGEs with more and larger air bubbles and the lowest hardness exhibited the highest sodium release rate and the strongest saltiness, independent of homogenization methods. The balance between air bubbles and water droplets in the GMS and GMP OGEs caused slower sodium release and lower saltiness. Overall, the presence of air bubbles in NaCl-loaded W/O oleogel-based emulsions was shown to have important implications for tailoring their sodium release and saltiness.

People are increasingly preparing milk tea using plant-based milks rather than cow's milk, e.g. , vegans, those with lactose intolerance, and those with flavor preferences. However, adding plant-based milks to tea may impact the digestion, release, and bioaccessibility of nutrients and nutraceuticals in both the tea and milk. In this study, oat milk tea model systems (OMTMSs) containing different fat and tea polyphenol concentrations were used to explore the impact of tea on macronutrient digestion in oat milk, as well as the impact of oat milk matrix on the polyphenol bioaccessibility in the tea. An in vitro gastrointestinal model that mimics the mouth, stomach, and small intestine was used. Tea polyphenols (>0.25%) significantly reduced the glucose and free fatty acids released from oat milk after intestinal digestion. Tea polyphenols (>0.10%) also inhibited protein digestion in oat milk during gastric digestion but not during intestinal digestion. The bioaccessibility of the polyphenols in the tea depended on the fat content of oat milk, being higher for medium-fat (3.0%) and high-fat (5.8%) oat milk than low-fat (1.5%) oat milk. Liquid chromatography-tandem mass spectrometry (UPLC-ESI-MS/MS) analysis showed that lipids improved the tea polyphenol bioaccessibility by influencing the release of flavonoids and phenolic acids from the food matrices. These results provide important information about the impact of tea on the gastrointestinal fate of oat milk, and vice versa , which may be important for enhancing the healthiness of plant-based beverages.

There is a need to reduce the proportion of animal-derived food products in the human diet for sustainability and environmental reasons. However, it is also important that a transition away from animal-derived foods does not lead to any adverse nutritional effects. In this study, the potential of blending whey protein isolate (WPI) with either shiitake mushroom (SM) or oyster mushroom (OM) to create hybrid foods with enhanced nutritional and physicochemical properties was investigated. The impact of OM or SM addition on the formation, microstructure, and physicochemical attributes of heat-set whey protein gels was therefore examined. The mushroom powders were used because they have relatively high levels of vitamins, minerals, phytochemicals, and dietary fibers, which may provide nutritional benefits, whereas the WPI was used to provide protein and good thermal gelation properties. A variety of analytical methods were used to characterize the structural and physicochemical properties of the WPI-mushroom hybrids, including confocal microscopy, particle electrophoresis, light scattering, proximate analysis, differential scanning calorimetry, thermogravimetric analysis, dynamic shear rheology, textural profile analysis, and colorimetry. The charge on whey proteins and mushroom particles went from positive to negative when the pH was raised from 3 to 9, but whey protein had a higher isoelectric point and charge magnitude. OM slightly increased the thermal stability of WPI, but SM had little effect. Both mushroom types decreased the lightness and increased the brownness of the whey protein gels. The addition of the mushroom powders also decreased the hardness and Young's modulus of the whey protein gels, which may be because the mushroom particles acted as soft fillers. This study provides valuable insights into the formation of hybrid whey protein-mushroom products that have desirable physiochemical and nutritional attributes.

Atherosclerosis is a causative factor associated with cardiovascular disease (CVD). Over the past few decades, extensive research has been carried out on the relationship between the n-6/n-3 fatty acid ratio of ingested lipids and the progression of atherosclerosis. However, there are still many uncertainties regarding the precise nature of this relationship, which has led to challenges in providing sound dietary advice to the general public. There is therefore a pressing need to review our current understanding of the relationship between the dietary n-6/n-3 fatty acid ratio and atherosclerosis, and to summarize the underlying factors contributing to the current uncertainties. Initially, this article reviews the association between the n-6/n-3 fatty acid ratio and CVDs in different countries. A summary of the current understanding of the molecular mechanisms of n-6/n-3 fatty acid ratio on atherosclerosis is then given, including inflammatory responses, lipid metabolism, low-density lipoprotein cholesterol oxidation, and vascular function. Possible reasons behind the current controversies on the relationship between the n-6/n-3 fatty acid ratio and atherosclerosis are then provided, including the precise molecular structures of the fatty acids, diet-gene interactions, the role of fat-soluble phytochemicals, and the impact of other nutritional factors. An important objective of this article is to highlight areas where further research is needed to clarify the role of n-6/n-3 fatty acid ratio on atherosclerosis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Staple foods serve as vital nutrient sources for the human body, and chewiness is an essential aspect of food texture. Age, specific preferences, and diminished eating functions have broadened the chewiness requirements for staple foods. Therefore, comprehending the formation mechanism of chewiness in staple foods and exploring approaches to modulate it becomes imperative. This article reviewed the formation mechanisms and quality control methods for chewiness in several of the most common staple foods (rice, noodles, potatoes and bread). It initially summarized the chewiness formation mechanisms under three distinct thermal processing methods: water medium, oil medium, and air medium processing. Subsequently, proposed some effective approaches for regulating chewiness based on mechanistic changes. Optimizing raw material composition, controlling processing conditions, and adopting innovative processing techniques can be utilized. Nonetheless, the precise adjustment of staple foods' chewiness remains a challenge due to their diversity and technical study limitations. Hence, further in-depth exploration of chewiness across different staple foods is warranted., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Starch is a natural, abundant, renewable and biodegradable plant-based polymer that exhibits a variety of functional properties, including the ability to thicken or gel solutions, form films and coatings, and act as encapsulation and delivery vehicles. In this review, we first describe the structure of starch molecules and discuss the mechanisms of their interactions with guest molecules. Then, the effects of starch-guest complexes on gelatinization, retrogradation, rheology and digestion of starch are discussed. Finally, the potential applications of starch-guest complexes in the food industry are highlighted. Starch-guest complexes are formed due to physical forces, especially hydrophobic interactions between non-polar guest molecules and the hydrophobic interiors of amylose helices, as well as hydrogen bonds between some guest molecules and starch. Gelatinization, retrogradation, rheology and digestion of starch-based materials are influenced by complex formation, which has important implications for the utilization of starch as a functional and nutritional ingredient in food products. Controlling these interactions can be used to create novel starch-based food materials with specific functions, such as texture modifiers, delivery systems, edible coatings and films, fat substitutes and blood glucose modulators.

In the field of food, the interaction between various components in food is commonly used to regulate food quality. Starches, proteins, and lipids are ubiquitous in the food system and play a critical role in the food system. The interaction between proteins, starches, and lipids components in flour is the molecular basis for the formation of the classical texture of dough, and has a profound impact on the processing properties of dough and the quality of flour products. In this article, the composition of the key components of flour (starch, protein and lipid) and their functions in dough processing were reviewed, and the interaction mechanism of the three components in the dynamic processing of dough from mixing to rising to frying was emphatically discussed, and the effects of the components on the network structure of dough and then on the quality of fried flour products were introduced. The analysis of the relationship between dough component interaction, network structure and quality of fried flour products is helpful to reveal the common mechanism of quality change of fried flour products, and provide a reference for exploring the interaction of ingredients in starch food processing.

Ulcerative colitis (UC) is a common chronic inflammatory disease that causes serious harm to human health. Probiotics have the effect of improving UC. This study evaluated the preventative potential of water-in-oil-in-water (W 1 /O/W 2 ) emulsions containing both probiotics and fish oil on UC and associated anxiety-like behavior using a mice model. UC model was established in mice by administering dextran sulfate sodium salt (DSS). Free probiotics, probiotic-loaded emulsions, or fish oil and probiotic co-loaded emulsions were then orally administered to the mice. Various bioassays, histological studies, 16s rDNA gene sequencing, and behavioral experiments were conducted to assess changes in the intestinal environment, microbiota, and anxiety-like behavior of the mice. The fish oil and probiotic co-loaded emulsions significantly reduced the inflammatory response by enhancing tight junction protein secretion (ZO-1, Occludin, and Claudin-1), inhibiting pro-inflammatory factors (TNF-α, and IL-1β), and promoting short-chain fatty acids (SCFAs) production. These emulsions also modified the gut microbiota by promoting beneficial bacteria and suppressing pathogenic bacteria, thereby restoring a balanced gut microbiota. Notably, the emulsions containing both probiotics and fish oil also ameliorated anxiety-like behavior in the mice. The co-delivery of probiotics and fish oil using W 1 /O/W 2 emulsions has shown significant promise in relieving UC and its associated anxiety-like behavior. These findings provide novel insights into the development of advanced therapeutic strategies for treating UC.

In this study, we examined the possibility of using industrial microwave processing to enhance the gelling properties and reduce the starch digestibility of mung bean flour (MBF). MBF (12.6 % moisture) was microwaved at a power of 6 W/g to different final temperatures (100-130 °C), and then its structural and functional properties were characterized. The microwave treatment had little impact on the crystalline structure or amylose content of the starch, but it roughened the starch granule surfaces and decreased the short-range ordered structure and degree of branching. In addition, the extent of mung bean protein denaturation caused by the microwave treatment depended on the final temperature. Slightly denaturing the proteins (100 °C) did not affect the nature of the gels (protein phase dispersed in a starch phase) but the gel network became more compact. Moderately denaturing the proteins (110-120 °C) led to more compact and homogeneous starch-protein double network gels. Excessive protein denaturation (130 °C) caused the gel structure to become more heterogeneous. As a result, the facilitated tangles between starch chains by more linear starch molecules after debranching, and the protein network produced by moderate protein denaturation led to the formation of stronger gel and the improvement of plasticity during large deformation (large amplitude oscillatory shear-LAOS). Starch recrystallization, lipid complexion, and protein network retard starch digestion in the MBF gels. In conclusion, an industrial microwave treatment improved the gelling and digestive properties of MBF, and Lissajous curve has good adaptability in characterizing the viscoelasticity of gels under large deformations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

For some food applications, it is desirable to control the flavor release profiles of volatile flavor compounds. In this study, the effects of crosslinking method and protein composition on the flavor release properties of emulsion-filled protein hydrogels were explored, using peppermint essential oil as a model volatile compound. Emulsion-filled protein gels with different properties were prepared using different crosslinking methods and gelatin concentrations. Flavor release from the emulsion gels was then monitored using an electronic nose, gas chromatography-mass spectrometry (GC-MS), and sensory evaluation. Enzyme-crosslinked gels had greater hardness and storage modulus than heat-crosslinked ones. The hardness and storage modulus of the gels increased with increasing gelatin concentration. For similar gel compositions, flavor release and sensory perception were faster from the heat-crosslinked gels than the enzyme-crosslinked ones. For the same crosslinking method, flavor release and perception decreased with increasing gelatin concentration, which was attributed to retardation of flavor diffusion through the hydrogel matrix. Overall, this study shows that the release of hydrophobic aromatic substances can be modulated by controlling the composition and crosslinking of protein hydrogels, which may be useful for certain food applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Owing to environmental, ethical, health, and safety concerns, there has been considerable interest in replacing traditional animal-sourced foods like meat, seafood, egg, and dairy products with next-generation plant-based analogs that accurately mimic their properties. Numerous plant-based foods have already been successfully introduced to the market, but there are still several challenges that must be overcome before they are adopted by more consumers. In this article, we review the current status of the science behind the development of next-generation plant-based foods and highlight areas where further research is needed to improve their quality, increase their variety, and reduce their cost, including improving ingredient performance, developing innovative processing methods, establishing structure-function relationships, and improving nutritional profiles.

Electrospinning is a technology for fabricating ultrafine fibers from natural or synthetic polymers that have novel or enhanced functional properties. These fibers have found applications in a diverse range of fields, including the food, medicine, cosmetics, agriculture, and chemical industries. However, the tendency for electrospun nanofibers to dissociate when exposed to certain environmental conditions limits many of their practical applications. The structural integrity and functional attributes of these nanofibers can be improved using physical and/or chemical crosslinking methods. This review article discusses the formation of polymeric nanofibers using electrospinning and then describes how different crosslinking methods can be used to enhance their mechanical, thermal, and biological attributes. Methods for optimizing the crosslinking reactions are discussed, including proper selection of crosslinker type and reaction conditions. Then, food, medical, and separation applications of crosslinked electrospun fibers are assessed, including in bone and skin tissue engineering, wound healing, drug delivery, air filtration, water filtration, oil removal, food packaging, food preservation, and bioactive delivery. Finally, areas where future research are needed are highlighted, as well as possible future applications of crosslinked nanofibers., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The application of many hydrophilic and hydrophobic nutraceuticals is limited by their poor solubility, chemical stability, and/or bioaccessibility. In this study, a novel Pickering high internal phase double emulsion co-stabilized by modified pea protein isolate (PPI) and sodium alginate (SA) was developed for the co-encapsulation of model hydrophilic (riboflavin) and hydrophobic (β-carotene) nutraceuticals. Initially, the effect of emulsifier type in the external water phase on emulsion formation and stability was examined, including commercial PPI (C-PPI), C-PPI-SA complex, homogenized and ultrasonicated PPI (HU-PPI), and HU-PPI-SA complex. The encapsulation and protective effects of these double emulsions on hydrophilic riboflavin and hydrophobic β-carotene were then evaluated. The results demonstrated that the thermal and storage stabilities of the double emulsion formulated from HU-PPI-SA were high, which was attributed to the formation of a thick biopolymer coating around the oil droplets, as well as thickening of the aqueous phase. Encapsulation significantly improved the photostability of the two nutraceuticals. The double emulsion formulated from HU-PPI-SA significantly improved the in vitro bioaccessibility of β-carotene, which was mainly attributed to inhibition of its chemical degradation under simulated acidic gastric conditions. The novel delivery system may therefore be used for the development of functional foods containing multiple nutraceuticals., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

When creating plant-based meat analogs, it is often challenging to mimic the structural and textural attributes of real meat products during the cooking process. In this study, we investigated the potential of using potato protein/calcium alginate composite gels to formulate plant-based meat analogs. These gels provide a semi-solid texture at ambient temperature that remains intact during cooking because the electrostatic crosslinks are resistant to heat. Composite gels consisting of potato protein (10 wt%) and alginate (0-2 wt%) were prepared using the internal gelation method. This method involves dispersing an insoluble form of calcium (CaHPO 4 ) throughout the protein-polysaccharide matrix and then using glucono-delta-lactone (GDL) to slowly lower the pH, thereby releasing the Ca 2+ ions evenly throughout the system. The calcium alginate increased the strength of the potato protein gels and provided structural resistance to heat. Appreciable water loss occurred during cooking for simple calcium alginate gels, but this was prevented when potato proteins were present. Increasing the alginate concentration from 0 to 1.5 % increased the strength of the composite gels but higher levels promoted phase separation and network disruption, which reduced the gel strength. Heating did not appreciably alter the microstructure of the composite gels, but it did alter that of the pure potato protein gels. Finally, the potential of the composite gels as plant-based meat analogs was assessed by comparing their thermal denaturation and textural properties to those of real chicken breast. The potato protein/alginate composites were shown to simulate the thermal denaturation and textural changes of real chicken during the cooking process. Overall, our results suggest that calcium alginate gels may be useful in the formulation of plant-based meat products with improved cooking properties., Competing Interests: Declaration of competing interest The authors declared that they have no conflicts of interest to this work., (Copyright © 2024 Elsevier B.V. All rights reserved.)