Search

Caloric Restriction (CR) has established anti-cancer effects, but its clinical relevance and molecular mechanism remain largely undefined. Here, we investigate CR's impact on several mouse models of Acute Myeloid Leukemias, including Acute Promyelocytic Leukemia, a subtype strongly affected by obesity. After an initial marked anti-tumor effect, lethal disease invariably re-emerges. Initially, CR leads to cell-cycle restriction, apoptosis, and inhibition of TOR and insulin/IGF1 signaling. The relapse, instead, is associated with the non-genetic selection of Leukemia Initiating Cells and the downregulation of double-stranded RNA (dsRNA) sensing and Interferon (IFN) signaling genes. The CR-induced adaptive phenotype is highly sensitive to pharmacological or genetic ablation of LSD1, a lysine demethylase regulating both stem cells and dsRNA/ IFN signaling. CR + LSD1 inhibition leads to the re-activation of dsRNA/IFN signaling, massive RNASEL-dependent apoptosis, and complete leukemia eradication in similar to 90% of mice. Importantly, CR-LSD1 interaction can be modeled in vivo and in vitro by combining LSD1 ablation with pharmacological inhibitors of insulin/IGF1 or dual PI3K/MEK blockade. Mechanistically, insulin/IGF1 inhibition sensitizes blasts to LSD1-induced death by inhibiting the anti-apoptotic factor CFLAR. CR and LSD1 inhibition also synergize in patient-derived AML and triple-negative breast cancer xenografts. Our data provide a rationale for epi-metabolic pharmacologic combinations across multiple tumors.

Nonequal current generation in the cells of a photovoltaic module, e.g., due to partial shading, leads to operation in reverse bias. This quickly causes a significant efficiency loss in perovskite solar cells. We report a more quantitative investigation of the reverse bias degradation. Various small reverse biases (negative voltages) were applied for different durations. After normalizing the applied voltages with the breakdown voltages, we found similar dependences of the reverse bias current and the degradation rate. We draw conclusions regarding possible degradation mechanisms and propose a way to increase the comparability of degradation rates for comparing different perovskite solar cells., Photovoltaic Materials and Devices

The preferential orientation of the perovskite (PVK) is typically accomplished by manipulation of the mixed cation/halide composition of the solution used for wet processing. However, for PVKs grown by thermal evaporation, this has been rarely addressed. It is unclear how variation in crystal orientation affects the optoelectronic properties of thermally evaporated films, including the charge carrier mobility, lifetime, and trap densities. In this study, we use different intermediate annealing temperatures Tinter between two sequential evaporation cycles to control the Cs0.15FA0.85PbI2.85Br0.15 orientation of the final PVK layer. XRD and 2D-XRD measurements reveal that when using no intermediate annealing primarily the (110) orientation is obtained, while when using Tinter = 100 °C a nearly isotropic orientation is found. Most interestingly for Tinter > 130 °C a highly oriented PVK (100) is formed. We found that although bulk electronic properties like photoconductivity are independent of the preferential orientation, surface related properties differ substantially. The highly oriented PVK (100) exhibits improved photoluminescence in terms of yield and lifetime. In addition, high spatial resolution mappings of the contact potential difference (CPD) as measured by KPFM for the highly oriented PVK show a more homogeneous surface potential distribution than those of the nonoriented PVK. These observations suggest that a highly oriented growth of thermally evaporated PVK is preferred to improve the charge extraction at the device level., Photovoltaic Materials and Devices, Team Peyman Taheri, ChemE/Opto-electronic Materials, Team Arjan Mol, ChemE/O&O groep

Multiple-source thermal evaporation is emerging as an excellent technique to obtain perovskite (PVK) materials for solar cell applications due to its solvent-free processing, accurate control of stoichiometric ratio, and potential for scalability. Nevertheless, the currently reported layer-by-layer deposition approach is afflicted by long processing times caused by the multiple repetitions of thin films, which hinder industrial uptake. On the other hand, the coevaporation entails higher complexity due to the challenges of controlling the sublimation of multiple sources simultaneously. In this work, we propose a simplified approach consisting of a single-cycle deposition (SCD) of three thick precursor layers to obtain high-quality Cs0.15FA0.85PbI2.85Br0.15 (CsFAPbIBr) films. After annealing, the optimized PVK film exhibits comparable properties to the one deposited by multicycle deposition in terms of crystal structure, in-depth uniformity, and optoelectrical properties. Also, the formation and evolution of SCD PVK during annealing are investigated. We found that, in the competitive processes of precursor diffusion and reaction, the presence of cesium bromide can assist precursor mixing driven by the annealing treatment, demonstrating a reaction-limited process in the PVK conversion. With this simplified SCD approach, a PVK film is obtained with expected optical and opto-electronic properties, providing an appealing way for future thermally evaporated PVK device preparation., Photovoltaic Materials and Devices, ChemE/Opto-electronic Materials, RID/TS/Instrumenten groep, ChemE/O&O groep

Monolithic perovskite/c-Si tandem solar cells have attracted enormous research attention and have achieved efficiencies above 30%. This work describes the development of monolithic tandem solar cells based on silicon heterojunction (SHJ) bottom- and perovskite top-cells and highlights light management techniques assisted by optical simulation. We first engineered (i)a-Si:H passivating layers for (100)-oriented flat c-Si surfaces and combined them with various (n)a-Si:H, (n)nc-Si:H, and (n)nc-SiOx:H interfacial layers for SHJ bottom-cells. In a symmetrical configuration, a long minority carrier lifetime of 16.9 ms was achieved when combining (i)a-Si:H bilayers with (n)nc-Si:H (extracted at the minority carrier density of 1015 cm-3). The perovskite sub-cell uses a photostable mixed-halide composition and surface passivation strategies to minimize energetic losses at charge-transport interfaces. This allows tandem efficiencies above 23% (a maximum of 24.6%) to be achieved using all three types of (n)-layers. Observations from experimentally prepared devices and optical simulations indicate that both (n)nc-SiOx:H and (n)nc-Si:H are promising for use in high-efficiency tandem solar cells. This is possible due to minimized reflection at the interfaces between the perovskite and SHJ sub-cells by optimized interference effects, demonstrating the applicability of such light management techniques to various tandem structures., Photovoltaic Materials and Devices

Silicon heterojunction (SHJ) solar cells have achieved a record efficiency of 26.81% in a front/back-contacted (FBC) configuration. Moreover, thanks to their advantageous high VOC and good infrared response, SHJ solar cells can be further combined with wide bandgap perovskite cells forming tandem devices to enable efficiencies well above 33%. In this study, we present strategies to realize high-efficiency SHJ solar cells through combined theoretical and experimental studies, starting from the optimization of Si-based thin-film layers to the implementation of electrodes with reduced indium and silver usage. Advanced opto-electrical simulations, which enable comprehensive theoretical understandings of the main physical mechanisms governing carriers’ collection and light management, provide clear pathways for device designs and experimental optimizations. We present the fabricated FBC-SHJ solar cells in both monofacial and bifacial configurations with the best efficiencies of 24.18% and 23.25%, respectively. We point out that to achieve optimum device performance, the compositional materials should be holistically optimized and evaluated as part of the contact stacks with adjacent layers. As an outlook beyond the classical FBC-SHJ solar cell architecture, we propose various novel SHJ-based solar cell architectures. Their potential performance was assessed and compared via rigorous opto-electrical simulations and a maximal efficiency of 27.60% was simulated for FBC-SHJ solar cells featuring localized contacts., Photovoltaic Materials and Devices, Electrical Engineering, Mathematics and Computer Science, QN/Kavli Nanolab Delft, Electrical Sustainable Energy

Passivating contacts are crucial for realizing high-performance crystalline silicon solar cells. Herein, contact formation by plasma-enhanced chemical vapor deposition (PECVD) followed by an annealing step is focused on. Poly-SiOx passivating contacts by combining plasma-assisted N2O-based oxidation of silicon (PANO-SiOx) with a thin film of phosphorus (n+) or boron (p+)-doped hydrogenated amorphous silicon oxide (a-SiOx:H) are manufactured. Postannealing is conducted for transitioning a-SiOx:H into poly-SiOx. The aim is to achieve a contact with low absorption and high-quality passivation. It is demonstrated that by tuning the plasma oxidation process time and power, the PANO-SiOx thickness and its passivation quality can be controlled. A higher SiO2 content is observed in PANO-SiOx than in the nitric acid oxidation of silicon (NAOS-SiOx) counterpart. PANO-SiOx acts as a stronger diffusion barrier for both boron and phosphorus atoms compared to NAOS-SiOx, affecting the dopant distribution during annealing. Implied open-circuit voltages up to 751 and 710 mV for n+ and p+ flat symmetric samples, respectively, are demonstrated. With respect to standard thermally grown SiO2 tunneling oxide combined with (in/ex)situ-doped low-pressure chemical vapor deposition poly-Si, this study presents a simple alternative for manufacturing passivating contact fully based on PECVD processes., Photovoltaic Materials and Devices

Single junction crystalline silicon (c-Si) solar cells are reaching their practical efficiency limit whereas perovskite/c-Si tandem solar cells have achieved efficiencies above the theoretical limit of single junction c-Si solar cells. Next to low-thermal budget silicon heterojunction architecture, high-thermal budget carrier-selective passivating contacts (CSPCs) based on polycrystalline-SiOx (poly-SiOx) also constitute a promising architecture for high efficiency perovskite/c-Si tandem solar cells. In this work, we present the development of c-Si bottom cells based on high temperature poly-SiOx CSPCs and demonstrate novel high efficiency four-terminal (4T) and two-terminal (2T) perovskite/c-Si tandem solar cells. First, we tuned the ultra-thin, thermally grown SiOx. Then we optimized the passivation properties of p-type and n-type doped poly-SiOx CSPCs. Here, we have optimized the p-type doped poly-SiOx CSPC on textured interfaces via a two-step annealing process. Finally, we integrated such bottom solar cells in both 4T and 2T tandems, achieving 28.1% and 23.2% conversion efficiency, respectively., Photovoltaic Materials and Devices, EKL Processing, Electrical Sustainable Energy

Background: We performed a multi-parametric analysis investigating the association between adiposity (as measured using body mass index [BMI] and computed tomography [CT]-based body composition), tumour infiltrating lymphocytes (TILs) and clinical outcomes in patients with advanced-stage cancer treated with immunotherapy in phase I clinical trials. Material and methods: All consecutive patients (N = 153) with metastatic solid tumours treated within immunotherapy-based phase I clinical trials between August 2014 and May 2019 at our institution were included. Baseline characteristics, BMI, TILs value and CT-assessed fat indices (total fat area [TFA], subcutaneous fat area [SFA] and visceral fat [VFA]) were collected. The primary endpoints were to evaluate the impact of these parameters on overall survival (OS) and progression-free survival (PFS). Kaplan–Meier method and Cox proportional-hazards model were used for survival analyses. Results: At both univariate and multivariate analyses, BMI was not associated with PFS neither when considered as continuous variable (HR 0.90, 95% CI 0.74–1.09, P = 0.28) nor as dichotomous variable (underweight/normal versus overweight/obese) (HR 0.79, 95% CI 0.55–1.14, P = 0.21). Interestingly, patients diagnosed with ‘immunogenic’ tumours and higher VFA/SFA ratio (1st and 2nd tertile versus 3rd tertile) presented an increased OS (HR 0.88, 95% CI 0.78–1.00, P = 0.047). Conclusion: Our analysis showed that patients with tumours that are already known as responsive to ICIs with higher VFA/SFA ratio presented an increased OS. Further studies are needed to elucidate the effect of adiposity on the host immune response to immunotherapy.

We reviewed the diagnostic accuracy of SARS-CoV-2 serological tests. Random-effects models yielded a summary sensitivity of 82% for IgM, and 85% for IgG and total antibodies. For specificity, the pooled estimate were 98% for IgM and 99% for IgG and total antibodies. In populations with ≤ 5% of seroconverted individuals, unless the assays have perfect (i.e. 100%) specificity, the positive predictive value would be ≤ 88%. Serological tests should be used for prevalence surveys only in hard-hit areas.

Organic-inorganic metal halide perovskites have attracted a considerable interest in the photovoltaic scientific community demonstrating a rapid and unprecedented increase in conversion efficiency in the last decade. Besides the stunning progress in performance, the understanding of the physical mechanisms and limitations that govern perovskite solar cells are far to be completely unravelled. In this work, we study the origin of their hysteretic behaviour from the standpoint of fundamental semiconductor physics by means of technology computer aided design electrical simulations. Our findings identify that the density of shallow interface defects at the interfaces between perovskite and transport layers plays a key role in hysteresis phenomena. Then, by comparing the defect distributions in both spatial and energetic domains for different bias conditions and using fundamental semiconductor equations, we can identify the driving force of hysteresis in terms of slow recombination processes and charge distributions., Photovoltaic Materials and Devices

Since the first application of a metal halide perovskite (PVK) absorber in a solar cell, these materials have drawn a great deal of attention in the photovoltaic (PV) community, showing exceptional rapid progress in power conversion efficiency. The potential advantages of low-cost, high efficiency, easy processability, and wide range of applications make PVK solar cells (PSCs) a desirable candidate for future uptake in the PV market over traditional semiconductors such as silicon. Furthermore, PVK thin-film technology holds a concrete potential to closely approach the theoretical efficiency limit for single-junction solar cells via unique control of the optoelectronic properties. However, for a disruptive breakthrough of PVK technology from fundamental research to industry, systematic research efforts are required to unravel the poor long-term stability and to reach a reliable large area fabrication process. In this review, we examine in detail recent progress on large-scale PSCs and we discuss challenges for commercialization touching upon the following aspects: material properties, fabrication technology, and industrialization challenges. Besides, the long-term stability and efficiency of large-area PSCs as well as PVK-based two-terminal tandem devices are discussed. In addition, strategies for PSC upscaling are further studied for scalable deposition technologies. Finally, we review the most recent literature on costs and environmental assessment., Photovoltaic Materials and Devices, ChemE/Opto-electronic Materials

Bifacial (BF) copper-plated crystalline silicon solar cell is an attractive topic to concurrently reduce silver consumption and maintain good device performance. However, it is still challenging to realize a high aspect ratio (AR) of the metal fingers. Herein, a new type of hybrid-shaped Cu finger is electromagnetically fabricated in a BF plating process. Cyclic voltammetry is employed to disclose the electrochemical behaviors of cupric ions in monofacial and simultaneous BF Cu-plating processes, such that the controllability of the plating process could be assessed. The optimal hybrid Cu finger is composed of a rectangular bottom part and a round top part, such that an utmost effective AR value of 1.73 is reached. In BF Cu-plating, two sub-three-electrode electrochemical cells are employed to realize equal metal finger heights on both sides of the wafer. Compared to our low thermal-budget screen-printing metallization, the Cu-plated silicon heterojunction devices show both optical and electrical advantages (based on lab-scale tests). The champion BF Cu-plated device shows a front-side efficiency of 22.1% and a bifaciality factor of 0.99., Photovoltaic Materials and Devices, Electrical Sustainable Energy

Solar-assisted water electrolysis is a promising technology for storing the energy of incident solar irradiation into hydrogen as a fuel. Here, an integrated continuous flow electrochemical reactor coupled to a monolithic perovskite-silicon tandem solar cell is demonstrated that provides light-driven electrochemical solar-to-hydrogen conversion with an energy conversion efficiency exceeding 21% at 1-Sun equivalent light intensity and stable operation during three simulated day-night cycles., Photovoltaic Materials and Devices

Thin films of transition metal oxides such as molybdenum oxide (MoOx) are attractive for application in silicon heterojunction solar cells for their potential to yield large short-circuit current density. However, full control of electrical properties of thin MoOx layers must be mastered to obtain an efficient hole collector. Here, we show that the key to control the MoOx layer quality is the interface between the MoOx and the hydrogenated intrinsic amorphous silicon passivation layer underneath. By means of ab initio modelling, we demonstrate a dipole at such interface and study its minimization in terms of work function variation to enable high performance hole transport. We apply this knowledge to experimentally tailor the oxygen content in MoOx by plasma treatments (PTs). PTs act as a barrier to oxygen diffusion/reaction and result in optimal electrical properties of the MoOx hole collector. With this approach, we can thin down the MoOx thickness to 1.7 nm and demonstrate short-circuit current density well above 40 mA/cm2 and a champion device exhibiting 23.83% conversion efficiency., Photovoltaic Materials and Devices, QN/Afdelingsbureau, Electrical Sustainable Energy

Excellent surface passivation induced by (i)a-Si:H is critical to achieve high-efficiency silicon heterojunction (SHJ) solar cells. This is key for conventional single-junction cell applications but also for bottom cell application in tandem devices. In this study, we investigated the effects of (i)a-Si:H deposition temperature on passivation quality and SHJ solar cell performance. At the lower end of temperatures ranging from 140°C to 200°C, it was observed with Fourier-transform infrared spectroscopy (FTIR) that (i)a-Si:H films are less dense, thus hindering their surface passivation capabilities. However, with additional hydrogen plasma treatments (HPTs), those (i)a-Si:H layers deposited at lower temperatures exhibited significant improvements and better passivation qualities than their counterparts deposited at higher temperatures. On the other hand, even though we observed the highest VOCs for cells with (i)a-Si:H deposited at the lowest temperature (140°C), the related FFs are poorer as compared to their higher temperature counterparts. The optimum trade-off between VOC and FF for the SHJ cells was found with temperatures ranging from 160°C to 180°C, which delivered independently certified efficiencies of 23.71%. With a further improved p-layer that enables a FF of 83.3%, an efficiency of 24.18% was achieved. Thus, our study reveals two critical requirements for optimizing the (i)a-Si:H layers in high-efficiency SHJ solar cells: (i) excellent surface passivation quality to reduce losses induced by interface recombination and simultaneously (ii) less-defective (i)a-Si:H bulk to not disrupt the charge carrier collections., Photovoltaic Materials and Devices, Electrical Sustainable Energy

The correlation between immune responses and protection from SARS-CoV-2 infections and its duration remains unclear. We performed a sanitary surveillance at the European Institute of Oncology (IEO) in Milan over a 17 months period. Pre-vaccination, in 1,493 participants, we scored 266 infections (17.8%) and 8 possible reinfections (3%). Post-vaccination, we identified 30 infections in 2,029 vaccinated individuals (1.5%). We report that the probability of infection post-vaccination is i) significantly lower compared to natural infection, ii) associated with a significantly shorter median duration of infection than that of first infection and reinfection, iii) anticorrelated with circulating antibody levels.

Low activation energy (Ea) and wide bandgap (Eg) are essential for (p)-contacts to achieve effective hole collection in silicon heterojunction (SHJ) solar cells. In this work, we study Plasma-Enhanced Chemical Vapor Deposition p-type hydrogenated nanocrystalline silicon oxide, (p)nc-SiOx:H, combined with (p)nc-Si:H as (p)-contact in front/back-contacted SHJ solar cells. We firstly determine the effect of a plasma treatment at the (i)a-Si:H/(p)-contact interface on the thickness-dependent Ea of (p)-contacts. Notably, when the (p)nc-Si:H layer is thinner than 20 nm, the Ea decreases by applying a hydrogen plasma treatment and a very-high-frequency (i)nc-Si:H treatment. Such an interface treatment also significantly reduces the contact resistivity of the (p)-contact stacks (ρc,p), resulting in an improvement of 6.1%abs in fill factor (FF) of the completed cells. Thinning down the (i)a-Si:H passivating layer to 5 nm leads to a low ρc,p (144 mΩ⋅cm2) for (p)-contact stacks. Interestingly, we observe an increment of FF from 72.9% to 78.3% by using (p)nc-SiOx:H layers featuring larger differences between their optical gap (E04) and Ea, which tend to enhance the built-in potential at the c-Si/(i)a-Si:H interface. Furthermore, we observe clear impacts on ρc,p, open-circuit voltage, and FF by optimizing the thicknesses of (p)-contact that influence its Ea. In front junction cells, the vertical and lateral collection of holes is affected by ρc,p of (p)-contact stacks. This observation is also supported by TCAD simulations which reveal different components of lateral contributions. Lastly, we obtain both front and rear junction cells with certified FF well-above 80% and the best efficiency of 22.47%., Photovoltaic Materials and Devices, Electrical Sustainable Energy

Crystalline silicon solar cells with passivating contacts based on doped poly-Si exhibit high optical parasitic losses. Aiming at minimizing these losses, we developed the oxygen-alloyed poly-Si (poly-SiOx) as suitable material for passivating contacts. From passivation point of view, poly-SiOx layers show excellent passivation quality and carrier selectivity for both n-type (iVOC,flat = 740 mV, contact resistance ρc = 0.7 mΩ/cm2, iVOC,textured = 723 mV) and p-type (iVOC,flat = 709 mV, ρc = 0.5 mΩ/cm2). Optically, due to the incorporation of oxygen, the absorption coefficient of poly-SiOx becomes much lower than that of doped poly-Si at long wavelength. Both n-type and p-type poly-SiOx layers are concurrently deployed in front/back-contacted (FBC) solar cells with a front indium tin oxide (ITO) layer to facilitate the lateral transport of carriers and minimize cell's reflection. A high cell FF of 83.5% obtained in double-side flat FBC solar cell indicates an efficient carrier collection by these passivating contacts. An active-area cell efficiency of 21.0% featuring JSC,EQE = 39.7 mA/cm2 is obtained in front-side textured poly-SiOx FBC cell, with the potential of further improvement in both VOC and FF. The optical advantage of poly-SiOx over poly-Si as passivating contact is also observed with a 19.7% interdigitated back-contacted (IBC) solar cell endowed with poly-SiOx emitter and back surface field. Compared to the reference 23.0% IBC solar cell with poly-Si passivating contacts, the one based on poly-SiOx passivating contacts shows higher IQE at wavelengths above 1100 nm. This indicates that for both FBC and IBC cells, poly-SiOx passivating contacts hold potential in enhancing the cell JSC by maximizing the cell spectral response., Photovoltaic Materials and Devices, Electrical Sustainable Energy

The window layers limit the performance of silicon heterojunction (SHJ) solar cells with front and back contacts. Here, we optimized tungsten-doped indium oxide (IWO) film deposited by radio frequency magnetron sputtering at room temperature. The opto-electrical properties of the IWO were manipulated when deposited on top of thin-film silicon layers. The optimal IWO on glass shows carrier density and mobility of 2.1 × 1020 cm−3 and 34 cm2 V−1s−1, respectively, which were tuned to 2.0 × 1020 cm−3 and 47 cm2 V−1s−1, as well as 1.9 × 1020 cm−3 and 42 cm2 V−1s−1, after treated on i/n/glass and i/p/glass substrates, respectively. Using the more realistic TCO data that were obtained on thin-film silicon stacks, optical simulation indicates a promising visible-to-near-infrared optical response in IWO-based SHJ device structure, which was demonstrated in fabricated devices. Additionally, by adding an additional magnesium fluoride layer on device, the champion IWO-based SHJ device showed an active area cell efficiency of 22.92%, which is an absolute 0.98% efficiency gain compared to the ITO counterpart, mainly due to its current gain of 1.48 mA/cm2., Photovoltaic Materials and Devices, Electrical Sustainable Energy

There appears to be a sex-specific association between obesity and colorectal neoplasia in patients with Lynch Syndrome (LS). We meta-analyzed studies reporting on obesity and colorectal cancer (CRC) risk in LS patients to test whether obese subjects were at increased risk of cancer compared to those of normal weight. We explored also a possible sex-specific relationship between adiposity and CRC risk among patients with LS. The summary relative risk (SRR) and 95% confidence intervals (CI) were calculated through random effect models. We investigated the causes of between-study heterogeneity and assessed the presence of publication bias. We were able to retrieve suitable data from four independent studies. We found a twofold risk of CRC in obese men compared to nonobese men (SRR = 2.09; 95%CI: 1.23-3.55, I2 = 33%), and no indication of publication bias (p = 0.13). No significantly increased risk due to obesity was found for women. A 49% increased CRC risk for obesity was found for subjects with an MLH1 mutation (SRR = 1.49; 95%CI: 1.11-1.99, I2 = 0%). These results confirm the different effects of sex on obesity and CRC risk and also support the public measures to reduce overweight in people with LS, particularly for men.

Background: The deeper knowledge of non–small-cell lung cancer (NSCLC) biology and the discovery of driver molecular alterations have opened the era of precision medicine in lung oncology, thus significantly revolutionizing the diagnostic and therapeutic approach to NSCLC. In Italy, however, molecular assessment remains heterogeneous across the country, and numbers of patients accessing personalized treatments remain relatively low. Nationwide programs have demonstrated that the creation of consortia represent a successful strategy to increase the number of patients with a molecular classification. Patients and Methods: The Alliance Against Cancer (ACC), a network of 25 Italian Research Institutes, has developed a targeted sequencing panel for the detection of genomic alterations in 182 genes in patients with a diagnosis of NSCLC (ACC lung panel). One thousand metastatic NSCLC patients will be enrolled onto a prospective trial designed to measure the sensitivity and specificity of the ACC lung panel as a tool for molecular screening compared to standard methods. Results and Conclusion: The ongoing trial is part of a nationwide strategy of ACC to develop infrastructures and improve competences to make the Italian research institutes independent for genomic profiling of cancer patients.