Search

Purpose: The aim of this study was to clarify the three-dimensional changes in maxillofacial morphology following orthognathic surgery using 3D-CT in patients with asymmetrical jaw deformities., Methods: The subjects were 30 patients with asymmetrical jaw deformities. Three-dimensional images taken preoperatively and 6 months postoperatively were re-aligned using image processing software with the horizontal plane, coronal plane, and midsagittal plane as reference axes. Thirty-nine measurements including 28 distances, nine angles, and two volumes were recorded, and differences between preoperative and postoperative measurements and percentage differences between paired measurements on the deviated and unevolved sides were calculated., Results: Translational and rotational movements of the maxillary dentition and mandibular body and the mandibular ramus internally rotating contributed to improved symmetry of the maxillofacial morphology, but the degree and proportion of these changes varied from case to case and mild asymmetry remained even after surgery., Conclusions: 3D-CT analysis of maxillofacial morphology is essential to accurately evaluate the asymmetry of hard and soft tissue morphology in the maxillofacial region and the degree of improvement after orthognathic surgery, and the tooth movement during preoperative orthodontic treatment should be determined taking into account the movement of the upper and lower jaws during orthognathic surgery., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objectives: This study aimed to assess the influence of the location and distribution of short-span scans, serving as intermediate registration data, on the trueness of digitally transferring the maxillomandibular relationship in full-mouth rehabilitation., Methods: Maxillary and mandibular complete-arch preparation casts mounted on an articulator were scanned, with and without interim restorations, using an intraoral scanner. Four types of short-span scans-right anterior, left anterior, right posterior, and left posterior-were captured from maxillary and mandibular casts. Each scan comprised two prepared teeth and two crowned teeth arranged alternately. These short-span scans served as intermediate data and were cross-registered with complete-arch interim restorations and preparation casts to transfer the maxillomandibular relationship. Based on the number (1 or 2), location (anterior or posterior), and distribution (unilateral or bilateral) of short-span scans, they were categorized into six groups. Trueness was assessed by evaluating the mandibular 3-dimensional (3D), spatial distance, angle, and linear distance deviations between the test and reference scans., Results: Significant differences in the trueness of digital cross-mounting were observed among the six groups (P < .05). The group registering the bilateral posterior areas exhibited the smallest 3D, spatial distance, angle, and linear distance deviations, whereas the group registering one anterior area showed the largest deviations., Conclusion: The number, location, and distribution of the registered short-span scans significantly affected the trueness of transferring the maxillomandibular relationship. A posterior short-span scan had higher trueness than an anterior scan. The symmetrical distribution of the two registered larger short-span scans over the cross-arch enhanced the registration trueness., Clinical Significance: Digital cross-mounting in full-mouth rehabilitation using short-span scans enhances transfer accuracy, improves patient comfort, and increases chairside efficiency., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Objective: To evaluate the effect of intraoral scanners (IOSs) and implant libraries (ILs) on the trueness of digital impressions for the fabrication of implant-supported full-arch (FA) prostheses., Methods: A stone cast of an edentulous maxilla with 6 implant analogues and cylindrical scanbodies (IPD ProCam®, Matarò, Barcelona, Spain) was probed using a coordinate measuring machine to capture a reference model (RM). The cast was mounted on a mannequin and scanned with 3 different IOSs (iTERO Element 5D Plus®, Align Technologies, San José, CA, USA; IS 3800®, Dexis, Quackertown, PN, USA; and i-700®, Medit, Seoul, South Korea). Ten scans were performed by an experienced operator using each IOS, first capturing only the occlusal surfaces, then the buccal and finally the palatal surfaces (less than 45 s per scan). In each scan, the meshes of the SBs were replaced by the corresponding IL file, with and without increment, to obtain the best correction for the mesh growth. The positions of the SBs in each file were compared with those in the RM, to evaluate the linear and cross distances between them. The final outcome was the trueness of the different IOSs, evaluating the effect of using different ILs on the quality of the impressions., Results: Significant differences were found between the different IOS scans and the RM, and among the different IOSs, in the different segments. The correction of the mesh growth through incremental ILs did not affect the final trueness of the IOS scans., Conclusions: Different levels of trueness were found among the IOSs evaluated, in the different scan segments, but with the cylindrical SBs used herein, the correction of the mesh growth with incremental ILs did not affect the final quality of the digital impressions., Statement of Clinical Relevance: There are still errors with IOS in the FA impressions. IOS have an effect on the quality of the digital impressions, and apparently the library has not, with purely cylindrical SBs: further studies are needed to confirm this aspect., Competing Interests: Declaration of competing interest The authors declare that they have no conflict of interest., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Aim: To assess the impact of the timing of soft-tissue augmentation (STA) on mean buccal bone changes following immediate implant placement (IPP) in the anterior maxilla., Materials and Methods: Patients with a failing tooth and intact buccal bone wall in the anterior maxilla (15-25) were enrolled in this randomized controlled trial. Following single IIP and socket grafting, they were randomly allocated to the control group (immediate STA performed during the same surgical procedure) or the test group (delayed STA performed 3 months later). Implants were placed with a surgical guide and immediately restored with an implant-supported provisional crown. Changes in bone dimensions were assessed using superimposed CBCT images taken prior to surgery and at 1-year follow-up. Clinical outcomes were registered at 1-year follow-up., Results: Twenty patients were randomized to each group (control: 16 females, 4 males, mean age 57.6; test: 9 females, 11 males, mean age 54.2). Ten patients in the control group and 13 patients in the test group had a thick bone wall phenotype. Estimated marginal mean horizontal buccal bone loss at 1 mm below the implant shoulder was -0.553 and -0.898 mm for the control and test group, respectively. The estimated mean difference of 0.344 mm in favour of the control group was not significant (95% CI: -0.415 to 1.104; p = 0.363). Also at all other horizontal and vertical levels, no significant differences could be observed between the groups. The combination of socket grafting and STA enabled counteraction of any buccal soft-tissue loss (≥ 0 mm) at 1 mm below the implant shoulder in 82% of the patients in the control group and in 75% of the patients in the test group (p = 1.000). The clinical outcome was favourable in both groups, yet implants in the control group demonstrated slightly less marginal bone loss (median difference 0.20 mm; 95% CI: 0.00-0.44; p = 0.028)., Conclusion: In patients with an intact and mainly thick buccal bone wall in the anterior maxilla, the timing of STA following IIP had no significant impact on mean buccal bone loss., Trial Registration: ClinicalTrials.gov identifier: NCT05537545., (© 2024 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objectives: To evaluate variation in treatment plans and pathological findings related to maxillary second and third molars based on panoramic (PAN) images and cone beam CT (CBCT) among Danish and Dutch oral and maxillofacial surgeons., Study Design: This web-based "paper" clinic contained 10 cases of impacted maxillary third molars comprising clinical information, PAN, and CBCT. Treatment plan and pathological findings were established based on clinical information and PAN, thereafter, based on CBCT by 28 surgeons. Options for treatment plan for third molars were no treatment, or tooth removal. Options for treatment plan for second molars were no treatment, tooth removal, or endodontic and/or filling therapy. The surgeons assessed external root resorption, marginal bone loss, and follicular space., Results: A change in treatment plan between PAN and CBCT was registered between 0% and 43% of the surgeons among the cases. The surgeons did not agree completely on the treatment plan in any of the cases. Variation was present among the surgeons evaluating pathological findings. In several cases, severity of root resorption was rated worse in CBCT than in PAN., Conclusions: Variation in treatment plan and pathological findings was observed among surgeons. No correlation between change in pathological findings and change in treatment plan was found., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Introduction: The objective of this study was to evaluate the short-term and long-term hard-tissue changes with miniscrew-assisted rapid palatal expansion (MARPE) and rapid palatal expansion (RPE) compared with a matched control group with voxel-based superimposition using 3-dimensional cone-beam computed tomography (CBCT) scans., Methods: A total of 180 CBCT scans were analyzed for 60 patients with a mean age of 13.9 years at 3 time points: pretreatment (T1), postexpansion (T2), and posttreatment (T3). Patients were divided into 3 groups: MARPE, RPE, and controls. Voxel-based superimposition was performed for CBCTs from T1 to T2 and T1 to T3 using the anterior cranial base as a reference. The hard-tissue surfaces were extracted after the superimposition procedure. Nine landmarks were analyzed: nasion, A-point, pogonion, left and right alar bases, zygoma, and gonion. Within-group changes were analyzed using linear mixed-effects models, including a random intercept per subject and the mixed effect of time (T1, T2, or T3) with test P values adjusted for multiple testing using Tukey's method. Between-group changes were analyzed using linear mixed-effects models, including a random intercept per subject and the mixed effects of time, group, and group × time interaction with P values adjusted for multiple testing using the Benjamin-Hochberg false discovery rate method., Results: In the short term, both MARPE and RPE led to a significant downward movement of the right gonion and lateral movement of the right alar base compared with controls at T2 (P <0.05). In addition, MARPE led to a significant downward movement of pogonion and left gonion. RPE led to a significant downward movement of the A-point and lateral movement of the left alar base compared with controls at T2 (P <0.05). However, in the long-term, no changes were observed between the groups at T3., Conclusions: There were significant differences in pogonion, alar base, and gonion between MARPE, RPE, and control groups in the short term. However, all the hard-tissue changes were transient, as there were no differences between the 3 groups in the long term., (Copyright © 2024 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objective: The aim of the study was to determine how the electrical activity of the temporalis, masseter and sternocleidomastoid muscles differs in children with reduced transverse jaw dimension compared to children with normal occlusion., Design: It was a experimental study. Thirty-seven patients were included in the study. 18 in the study group received orthodontic treatment with removable appliances and 19 subjects were classified as normal occlusion subjects in the control group. A panoramic X-ray and digital intraoral scan were taken, followed by an surface electromyography of three muscle pairs (temporalis muscles, masseter muscles, sternocleidomastoid muscles) in resting position, while clenching and clenching on cotton rollers., Results: There was significantly greater activity in the experimental group than in the control group comparing muscles: temporalis muscles and masseter muscles in the resting position. Additionally, significantly greater activity of muscles in the control group was found during clenching. However, the asymmetry index of muscles indicates that there is significantly greater asymmetry of muscles activity in the experimental group. Compared to children with normal occlusion, children with a narrowed transverse dimension of the jaw have statistically significant differences in the bioelectrical activity of the temporalis, masseter and sternocleidomastoid muscles, as well as greater asymmetry in the bioelectrical voltage of the masseter muscles., Conclusions: Patients with reduced transverse dimension of the jaw are characterized by increased resting activity of the masticatory muscles and reduced functional activity of the masticatory muscles. These patients have increased asymmetry in the bioelectrical tension of the masticatory muscles., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Objectives: To measure the influence of scanning pattern on the accuracy, time, and number of photograms of complete-arch intraoral implant scans., Methods: A maxillary edentulous patient with 7 implants was selected. The reference implant cast was obtained using conventional methods (7Series Scanner). Four groups were created based on the scanning pattern used to acquire the complete-arch implant scans by using an intraoral scanner (IOS) (Trios4): manufacturer's recommended (Occlusal-Buccal-Lingual (OBL)), zig-zag (Zig-zag), circumferential (Circumf), and novel pattern that included locking an initial occlusal scan (O-Lock group) (n = 15). Scanning time and number of photograms were recorded. The linear and angular measurements were used to assess scanning accuracy. One-way ANOVA and Tukey tests were used to analyze trueness, scanning time, and number of photograms. The Levene test was selected to assess precision (α=0.05)., Results: Statistically significant differences in trueness were detected among OBL, Zig-zag, Circumf, and O-Lock regarding linear discrepancy (P<0.01), angular discrepancy (P<0.01), scanning time (P<0.01), and number of photograms (P<0.01). The O-Lock (63 ± 20 µm) showed the best linear trueness with statistically significant differences (P < 0.01) with Circumferential (86 ± 16 µm) and OBL (87 ± 19 µm) groups. The O-Lock (93.5 ± 13.4 s, 1080 ± 104 photograms) and Circumf groups (102.9 ± 15.1 s, 1112 ± 179 photograms) obtained lower scanning times (P < 0.01) and number of photograms (P < 0.01) than OBL (130.3 ± 19.4 s, 1293 ± 161 photograms) and Zig-zag (125.7 ± 22.1 s, 1316 ± 160 photograms) groups., Conclusions: The scanning patterns tested influenced scanning accuracy, time, and number of photograms of the complete-arch scans obtained by using the IOS tested. The zig-zag and O-Lock scanning patterns are recommended to obtain complete-arch implant scans when using the selected IOS., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Transalveolar sinus elevation is a minimally invasive technique aimed at augmenting the vertical bone height in the posterior maxilla, facilitating successful implant placement in areas with insufficient bone volume. This study compares the efficacy of osseodensification and piezoelectric internal sinus elevation (PISE) techniques in delayed implant placement. The primary objective was to radiographically assess vertical bone gain and bone density, while secondary objectives included clinical assessment of primary implant stability and post-operative satisfaction of both patients and operators. The study population of a total of 16 patients was randomly divided into two groups. Group 1 underwent osseodensification sinus lift using sticky bone as a graft material, whereas Group 2 received PISE with the same graft material. Results indicated that the osseodensification technique led to greater bone gain, improved bone density, and shorter surgical duration. Additionally, osseodensification was associated with enhanced rapid healing and higher patient satisfaction. Conversely, the PISE technique demonstrated superior primary stability of implants on the day of surgery. These findings suggest that while both techniques are effective, osseodensification may offer advantages in terms of bone gain, density, and patient satisfaction, making it a reliable method for enhancing rapid healing in delayed implant placement. the study was registered on clinicaltrials.gov at 26 th September 2023 and clinical trials ID is NCT06055127., (© 2024. The Author(s).)

The canalis sinuosus, a canal containing the anterior superior alveolar nerve bundle, originates from the infraorbital canal and extends along the maxillary sinus and nasal cavity edges to the anterior maxilla. It was once regarded as an anatomical variation. However, with the widespread application of cone beam computed tomography (CBCT), the detection rate of canalis sinuosus in the population has increased. The canalis sinuosus exhibits diverse courses, branching into multiple accessory canals and terminating at the nasal floor or the anterior tooth region, with the majority traversing the palatal side of the central incisor. The anterior superior alveolar nerve bundle within the canalis sinuosus not only innervates and nourishes the maxillary anterior teeth and the corresponding soft tissues, and the maxillary sinus mucosa, but also relates to the nasal septum, lateral nasal wall, and parts of the palatal mucosa. To minimize surgical complications, strategies for preventing and treating canalis sinuosus injuries need to be investigated. Preoperatively, CBCT is used to identify the canalis sinuosus and to virtually design implant placement at a distance of more than 2 mm from the canalis sinuosus. Intraoperatively, assessing bleeding and patient comfort, complemented by precision surgical techniques such as the use of implant surgical guide plates. Postoperatively, CBCT is used to examine the relationship between the implant and the canalis sinuosus, and treatment of canalis sinuosus injuries can be tailored based on the patient's symptoms. This review summarizes the detection of canalis sinuosus in the population, its anatomical characteristics, and the physiological functions in the anterior maxilla, and discusses strategies for avoiding canalis sinuosus injuries during implant surgery, thereby enhancing clinical awareness and providing references for clinical decision-making.

This retrospective study used cone-beam computed tomography to investigated the crown-root morphology and alveolar bone structure in incisors region in subjects with closed deep overbite and comparison the difference between gender and age. The CBCT images for 40 subjects (group C) with Angle II division 2 were selected from patients of the HeFei Stomatological Hospital from November 2023 to March 2024.20 individual normal occlusion subjects (group A),20 patients with Angle II division 1(group B) were included. The crown-root ratio of the maxillary and mandibular anterior teeth, crown-root angle and alveolar bone structure were measured on the CBCT images, the data were statistically analyzed. In addition to mandibular lateral incisor, the crown-root ratio of maxillary and mandibular anterior teeth in the Class II division 2 group was higher than that in the individual normal occlusion group and the Class II division 1 (P < 0. 05). The crown-root angle of maxillary anterior teeth in the Class II division 2 group was smaller than that in the individual normal occlusion group and the Class II division 1 (P < 0. 05). The alveolar bone thickness of the maxillary central incisor was comparatively smaller, while the alveolar bone height was relatively higher in the Class II division 2 group. Age and gender were associated with change in root lengths and crown-root angle for the Class II division 2 group (P < 0. 05). Patients with closed deep overbite malocclusion exhibit a significant difference compared to the controls for most measurements. The patients presenting with Class II division 2 malocclusion exhibit excessive inward positioning of the anterior teeth, resulting in evident crown-root angle, a large crown-root ratio, and minimal labial alveolar bone. In order to keep the tooth movement within the safe range of alveolar bone movement, it is necessary to strictly control the torque and use appropriate orthodontic force to reduce the risk of bone fenestration, bone dehiscence, gingival recession and root resorption., (© 2024. The Author(s).)

Background: Environmental and genetic factors associated with canine impaction have been extensively researched, whereas the bone characteristics in the impaction area have not been thoroughly studied. Accordingly, the objective of this investigation was to provide a skeletal assessment in terms of bone density, bone microstructure, bone volume, and palatal volume in subjects with unilaterally impacted maxillary canines., Methods: A retrospective design has been employed to address the aim of this study, where the initial pre-treatment cone-beam computed tomography (CBCT) scans of 30 patients with unilateral maxillary canine impaction were assessed. The obtained patients' data were equally divided according to the location of the impaction into 2 groups, one with buccally impacted canines, and another with palatal impactions, with the contra-lateral sides in both groups serving as the controls. Skeletal measurements such as bone density (BD), bone microstructure in terms of fractal dimension (FD), maxillary bone volume (MBV), and palatal volume (PV) were evaluated from the acquired CBCTs in both groups and compared to the controls., Results: With buccal impactions, significantly greater BD and FD have been reported (p < 0.001), whereas non-significant differences were found regarding the PV when compared with controls (p = 0.56). MBV was significantly greater on the non-impaction side in comparison with buccal impaction sides (p < 0.001). For palatal impactions: BD, FD, and MBV were significantly greater on the impaction sides (p < 0.001), and conversely with PV which has been reported to be significantly greater on the non-impaction sides (p < 0.001)., Conclusions: As per the obtained results, buccally impacted canines are associated with greater BD and FD, and less MBV, whereas palatally impacted canines are accompanied with greater BD, FD, and MBV, in addition to less PV, when both conditions are compared with the non-impaction sides., (© 2024. The Author(s).)

Background: The current trial evaluated the midfacial gingival margin changes, volumetric, radiographic and clinical alterations 1-year following immediate implant placement with customized healing abutment (IIP + CHA) either solely, or in combination with xenograft (IIP + Bonegraft) or with connective tissue grafting (IIP + CTG) at sites with thin labial bone in the esthetic zone., Methods: Thirty-nine non-restorable maxillary teeth indicated for extraction in the esthetic zone were included. Participants were randomly assigned into three equal group; IIP + Bonegraft (Control), IIP + CTG and IIP + CHA. Midfacial gingival margin changes(mm) as primary outcome, labial soft tissue contour change(mm), interdental tissue height changes and total volume(mm 3 ) were assessed. Amount of bone labial to the implant and crestal bone level changes were also recorded. All outcomes were measured 1-year post-operative., Results: The midfacial gingival margin changes demonstrated a significant difference (P ≤ 0.05) between the groups showing -0.98, -0.74 and -1.54 mm in sites treated with IIP + Bone graft, IIP + CTG and IIP + CHA respectively after1-year. While labial soft tissue contour change (mm), total volume (mm 3 ) and distal interdental tissue height changes (mm) revealed a significant difference after one-year between the studied groups, yet mesial interdental tissue height changes showed no difference (P > 0.05). Both IIP + Bone graft and IIP + CHA groups revealed a significant positive correlation between the total volume loss (mm 3 ) after 1 year and mid-facial gingival margin changes (P ≤ 0.05). However, no significant correlation was observed in the IIP + CTG group (P = 0.63). CBCT measurements showed a significant difference in crestal bone changes between the three groups (P ≤ 0.05), yet, there was no significant difference regarding mean amount of bone labial to the implant(P > 0.05)., Conclusions: This investigation suggests that the mere presence of CTG simultaneous with IIP in the anterior maxilla reduced the midfacial gingival margin alterations (mm), besides, CTG decreased the overall volume loss (mm 3 ) by 5-folds compared to the other studied groups after one year. Meanwhile, using CHA alone with IIP failed to maintain the peri-implant soft tissues contour., Trial Registration: The current trial was retrospectively registered at Clinical trials.gov (ID: NCT05975515, Date: 27-July-2023)., (© 2024. The Author(s).)

Background: This study used micro-focus X-ray Computed Tomography (micro-XCT) to examine the anatomical differences and dimensions of the maxillary incisive canal (MIC) in a South African population. The accurate imaging yielded dependable results that support earlier research and enhance anterior maxilla surgery planning. Furthermore, these anatomical features are compared between various racial and gender groupings in the study., Methods: Using a micro-XCT scanner, 108 human cadaver skulls from the Pretoria Bone Collection were scanned and included in the study. Advanced volume rendering software was employed for measuring the MIC length, diameter, shape, and the buccal bone wall measurements in relation to the MIC., Results: Significant anatomical variation in the size and shape of the MIC was identified in the population, with variations seen between racial and gender groups. The incisive foramen (ICO) mean diameter was 6.61 mm, and the MIC length varied from 4.96 to 20.10 mm. There were significant differences in the buccal alveolar bone height between different ethnic groups and gender. Regarding morphological patterns in coronal and sagittal views, single canals were more common in the black population while Y-shaped canals were more common in the white population. The study also introduced a new metric by measuring the mean distances between teeth #11 and #21 and the ICO (1.83 mm and 1.88 mm respectively)., Conclusions: The complex anatomical differences of the MIC in a South African population were clarified. Clinicians should be aware of tooth sockets in near proximity to the MIC and perform accurate preoperative assessment using sophisticated 3-D imaging and preferable guided implant placement in the anterior maxilla., (© 2024. The Author(s).)

Background: Maxillary retrognathia and/or mandibular prognathia are resulting in class III malocclusion. Regarding orthodontic class III malocclusion treatment, the literature reports several treatment approaches. This comparative clinical study investigated two maxillary protraction protocols including bone anchors and Delaire type facemask., Methods: Cephalometric radiographs of n = 31 patients were used for data acquisition. The patients were divided into two groups according to their treatment protocol: bone anchored protraction (n = 12, 8 female, 4 male; mean age 11.00 ± 1.76 years; average application: 13.50 ± 5.87 months) and facemask protraction (n = 19, 11 female, 8 male; mean age 6.74 ± 1.15 years; average application: 9.95 ± 4.17 months). The evaluation included established procedures for measurements of the maxilla, mandibula, incisor inclination and soft tissue. Statistics included Shapiro-Wilk- and T-Tests for the radiographs. The level of significance was set at p < 0.05., Results: The cephalometric analysis showed differences among the two groups. SNA angle showed significant improvements during protraction with bone anchors (2.30 ± 1.18°) with increase in the Wits appraisal of 2.01 ± 2.65 mm. SNA angle improved also during protraction with facemask (1.22 ± 2.28°) with increase in the Wits appraisal of 1.85 ± 4.09 mm. Proclination of maxillary incisors was larger in patients with facemask (3.35 ± 6.18°) and ML-SN angle increased more (1.05 ± 1.51°) than in patients with bone anchors. Loosening rate of bone anchors was 14.58%., Conclusions: Both treatment protocols led to correction of a class III malocclusion. However, this study was obtained immediately after protraction treatment and longitudinal observations after growth spurt will be needed to verify the treatment effects over a longer period. The use of skeletal anchorage for maxillary protraction reduces unwanted side effects and increases skeletal effects needed for class III correction., (© 2024. The Author(s).)

The nasopalatine canal (NPC), an interosseous conduit in the anterior maxilla, plays a crucial role in various dental procedures, such as implant placement, orthodontics, and surgical interventions. Accurate anatomical characterization of the NPC is essential to avoid complications, as its morphometric variations can impact the nasopalatine nerve and vascular structures within the canal. Traditional radiography techniques are limited in displaying the canal's detailed anatomy due to issues like magnification and distortion. Cone beam computed tomography (CBCT), with its superior imaging quality and reduced radiation exposure, has become the preferred method for NPC evaluation. This systematic review aimed to evaluate the published literature on the variations in anatomy and dimensions of the NPC using CBCT. A complete literature search was conducted in Web of Science, PubMed/Medline, EMBASE, Scopus, Cochrane Library, Google Scholar, and ProQuest electronic databases. The following keywords were used alone or combined: CBCT, measurements [(nasopalatine canal length), (incisive foramen), (foramina of Stenson), (buccal bone plate), gender, plane as (oblique measurements), or (sagittal or axial). Papers were manually searched utilizing their reference titles. Research selection was restricted to the time of publication but not to the type of tested publication from different countries or sex and NPC parameter measurements. Fourteen full-length papers were included. Parameters like NPC length and diameters of incisive foramen (IF) and foramina of Stenson (FS) were generally higher in males than females, with significant differences noted across most studies. NPC dimensions are influenced by sex, with males typically exhibiting larger measurements. Additionally, NPC dimensions vary among different populations.

Purpose: The aim of this study was to investigate the accessory root canal morphology of maxillary first molars in a Black South African subpopulation., Methods: Micro-computed tomography was used to investigate 101 maxillary first molars (from 50 male and 51 female teeth, right 53 teeth, left 48 teeth). The prevalence of chamber canals, and the number, type and location (root third) of accessory canals were recorded. The relationships between arch side, sex and age were examined using chi-squared tests of association. Intra- and inter-observer reliability were assessed using Cohen's kappa test., Results: Intra- and inter-rater agreement was 96.9% and 98.1%, respectively. Variations in accessory root canal anatomy according to side, sex and age were evident. Chamber canals were identified in 10.9% of teeth. Accessory canals were found mainly in the apical third of most teeth in the sample, and distributed predominantly in the mesio-buccal root. Apical deltas were most prevalent in the mesio-buccal root, and their frequency decreased in the palatal and then finally the disto-buccal root., Conclusion: Accessory root canals were common in this population, and showed a diverse range of anatomy. The present findings will be of assistance to clinicians during endodontic treatment and will also be valuable for educational purposes.

Purpose: To determine the change in the sagittal and vertical position of mini-implants placed in the maxilla during distal movement of the entire maxillary dentition., Materials and Methods: Overall, 28 mini-implants (1 placed on each side in 14 patients) were evaluated in healthy patients aged 15 to 25 years old. CBCTs were taken immediately after leveling and aligning prior to distalization (T1) and after 6 months (T2) to evaluate the distal movement of the maxillary teeth and position of the mini-implants. The vertical and sagittal angulation of each mini-implant was measured at T1 and T2. The linear distance between the mini-implant and the alveolar crest, the maxillary sinus, the maxillary second premolar, and the maxillary first permanent molar were measured. The change in angulation and the linear displacement of the miniimplant were evaluated in the vertical and sagittal plane. Wilcoxon signed rank test was performed to determine if there was a statistically significant change in the position of the mini-implant., Results: Vertically, there was a significant change in the linear distance between the mini-implant and the alveolar crest on the right side (P ≤ .006) as well as the miniimplant and the maxillary sinus on the left side (P ≤ .003). Sagittally, there was a statistically significant rotation of the miniimplant occlusally (left side P ≤ .004 and right side P ≤ .002). The head and tip of the mini-implant were displaced toward the maxillary second premolar and away from the maxillary first permanent molar, respectively. There was a significant relative displacement of the mini-implant anteriorly away from the maxillary first permanent molar (left side P ≤ .026 and right side P ≤ .041) and closer to the maxillary second premolar (left side: P ≤ .011 and right side: P ≤ .002)., Conclusions: There was a statistically and clinically significant rotation of the mini-implant in the vertical and sagittal direction during distal movement of the entire maxillary arch. The linear displacement of the mini-implant was more pronounced in the sagittal direction than the vertical direction.

Background and Objectives: With the goal of identifying regions with bicortical bone and avoiding root contact, the present study proposes an innovative technique for the simulation of the insertion of mini orthodontic implants using automatic jaw segmentation. The simulation of mini implants takes place in 3D rendering visualization instead of Multi-Planar Reconstruction (MPR) sections. Materials and Methods: The procedure involves utilizing software that automatically segments the jaw, teeth, and implants, ensuring their visibility in 3D rendering images. These segmented files are utilized as study models to determine the optimum location for simulating orthodontic implants, in particular locations characterized by limited distances between the implant and the roots, as well as locations where the bicortical structures are present. Results: By using this method, we were able to simulate the insertion of mini implants in the maxilla by applying two cumulative requirements: the implant tip needs to be positioned in a bicortical area, and it needs to be situated more than 0.6 mm away from the neighboring teeth's roots along all of their axes. Additionally, it is possible to replicate the positioning of the mini implant in order to distalize the molars in the mandible while avoiding the mandibular canal and the path of molar migration. Conclusions: The utilization of automated segmentation and visualization techniques in 3D rendering enhances safety measures during the simulation and insertion of orthodontic mini implants, increasing the insertion precision and providing an advantage in the identification of bicortical structures, increasing their stability.

Introduction: The long pathway that the canines take as they emerge into the maxillary arch makes them vulnerable to disruption during their natural emergence time. The process of planning treatment for impacted maxillary canine (IMC) presents significant challenges, underscoring the need for careful consideration and expertise., Objective: The aim of this article was to shed light on these complexities by discussing clinical case studies involving IMC, providing insights into the intricacies of their management., Conclusions: The management of IMC within orthodontics presents a multifaceted challenge that include the necessity for precise diagnostic processes, prudent use of cone beam computed tomography (CBCT), the strategic selection between open and closed exposure techniques, a in-depth understanding of the specific orthodontic biomechanics involved, and a keen awareness of potential adverse outcomes such as ankylosis, prolonged treatment times, root resorption, and additional complications.

Background: In clinical practice, the buccal approach is typically the primary choice for endodontic microsurgery. Owing to the thickness of the buccal bone plate, the distance between the buccal bone plate and palatal lesion location, and soft tissue traction, the palatal approach may be more suitable for microsurgery for apical periodontitis of the palatal roots of the maxillary molars. However, the length of the palatal root, location of the greater palatine artery (GPA) and foramen (GPF), and surgical field of observation make palatal surgery challenging., Case Presentation: With the aid of Cone-beam computed tomography imaging, the palatal approach was successfully applied in nine cases of endodontic microsurgery of the palatal root of a maxillary molar with a periapical lesion in Hangzhou Stomatology Hospital from January to December 2022., Conclusions: Complete healing was assessed based on clinical symptoms and radiographic images at the 3- and 24-month follow-up visits in all nine cases. Several tips have been proposed including surgical positioning, incision design, palate flap modification, bone removal, and root-end resection., (© 2024. The Author(s).)

Purpose: This study aimed to evaluate the accuracy of detecting vertical root fractures in Biodentine™-filled teeth using the Promax 3Dmax cone-beam computed tomography (CBCT) unit compared to periapical radiographs. It tested hypotheses regarding CBCT's diagnostic superiority in non-root-filled and Biodentine™-root-filled maxillary central incisors and assessed the impact of smaller field of view and lower intensity settings on detection accuracy., Materials and Methods: Extracted maxillary incisors were divided into groups based on fracture status and root filling material, then placed in a Thiel-embalmed skull to simulate clinical conditions. The teeth were imaged using periapical radiographs and the CBCT unit under different settings. Fracture thickness was measured with microcomputed tomography for accuracy benchmarking. Multiple observers assessed the images, and statistical analyses were conducted to evaluate diagnostic performance., Results: Intra-rater reliabilities of consensus scores ranged from good to very good. Specificities were generally higher than sensitivities across all imaging modalities, but sensitivities remained constantly low. None of the Area Under the Curve scores exceeded 0.6, indicating poor overall accuracy for all imaging modalities. Paired comparisons of the area differences under Receiver Operator Characteristic curves revealed no significant differences between the CBCT and periapical radiograph techniques for detecting vertical root fractures in either Biodentine™-filled or non-root-filled teeth., Conclusions: There was no significant accuracy improvement of the current CBCT device (Promax 3Dmax, Planmeca, Finland) over periapical radiographs in detecting small vertical root fractures in both non-root-filled and Biodentine™-root-filled maxillary central incisors. A smaller field of view with lower intensity did not enhance detection accuracy. These results highlight the challenges in accurately detecting small VRFs, emphasizing the need for further research and technological advancements in this domain., (© 2024. The Author(s).)

Orthognathic surgery in patients with lip and palate clefts is challenging owing to scar tissue from primary repairs and severe deformities. In this study, we evaluated the stability of Le Fort I osteotomy with intraoral vertical ramus osteotomy (IVRO) in patients with cleft lip and palate using 3-dimensional (3D) analysis. This retrospective study comprised 14 cleft lip and palate patients (3 females, 11 males; the average age at surgery: 23.8 y) who underwent bimaxillary orthognathic surgery involving Lefort I osteotomy and IVRO. Cone-beam computed tomography (CBCT) images were obtained at preoperative (T0), 1-month postoperative (T1), and 1-year follow-up (T2) periods. The 3D analysis assessed the transitions and rotations of the maxilla and mandible using a virtual triangle. The maxilla showed stability in all directions at the 1-year follow-up with minimal relapse. The distal segment of the mandible exhibited clinically acceptable anterior (1.15 mm relapse) movements and pitch rotation (2.88° counterclockwise relapse) during the first year postoperatively. The proximal mandibular segment underwent anterior-inferior transition (1.21 and 2.01 mm, respectively) and lateral-outward rotation (4.90° and 7.51°, respectively) postsurgery, remaining unchanged 1 year postoperation. Le Fort I osteotomy with IVRO provides skeletal stability in patients with cleft lips and palates. This study demonstrated a minimal maxillary relapse and clinically acceptable movements in the distal mandibular segment during the first postoperative year. The proximal mandibular segment moved anteriorly and inferiorly, rotated laterally and outward after surgery, and remained unchanged at the 1-year follow-up., Competing Interests: The authors report no conflicts of interest., (Copyright © 2024 by Mutaz B. Habal, MD.)

Objective: To investigate the mean tooth length and root canal configuration of human maxillary and mandibular premolars in the population of Hyderabad, Pakistan, using Cone Beam Computed Tomography (CBCT)., Study Design: Observational study. Place and Duration of the Study: Department of Operative Dentistry and Endodontics, Liaquat University of Medical and Health Sciences, Jamshoro, Sindh, Pakistan, from December 2022 to March 2023., Methodology: Using retrospective analysis of CBCT scans, tooth length, the number of roots, and root canal configuration of 536 mandibular and maxillary premolars were assessed in the subpopulation of Pakistan. The data were analysed employing descriptive statistics, Chi-square tests, and One-Way ANOVA to determine the association between various factors and root canal morphology., Results: Vertucci Type 1 (one canal) was the most common configuration in maxillary premolars, with frequencies ranging from 46.3 to 52.2%. The mean length of all 8 premolars ranged from 20.56 mm to 21.58 mm. C-shaped canal configurations were observed in a small percentage of maxillary and mandibular premolars, with C1 being the most common. No significant association was found between gender and canal configuration or tooth length, and in tooth lengths among different canal configurations., Conclusion: Vertucci Type 1 was the most common configuration in maxillary premolars, followed by Vertucci Type 4. Single-rooted premolars were more prevalent, while two-root configurations were less common. C-shaped canal configurations were observed in a small percentage of premolars, with higher frequency in mandibular premolars., Key Words: Cone beam computed tomography, Dental anatomy, Endodontics, Premolars, Root canal morphology.

Objectives: This study aims to compare and analyze the biomechanical effect and the displacement trend of RME and MSE on the maxillofacial complex under different palatal shapes by using finite element analysis., Methods: The three-dimensional model of maxillofacial complex was obtained from a computed tomography image of a person with a normal palate. Then, we modified the shape of the palate to obtain the model with a high palate. Additionally, two expander devices were considered. MSE and RME were created and four models were made: Model 1: Normal-palate craniomaxillofacial complex with RME expander; Model 2: Normal-palate craniomaxillofacial complex with MSE expander; Model 3: High-palate craniomaxillofacial complex with RME expander; Model 4: High-palate craniomaxillofacial complex with MSE expander. Then, lateral forced displacement was applied and the analysis results were obtained., Results: The lateral displacement of the palatal suture of Model 3 is greater than that of Model 1, and the maxilla has more rotation. The crown/root ratio of Model 1 is significantly greater than that of the other three groups. Compared with Model 1, Model 3 has greater stress concentration in the superstructure of the craniomaxillofacial complex. Both of them have greater stress in the anchorage area than Model 2 and Model 4., Conclusion: Different shapes of the palate interfere with the effects of RME and MSE, and its influence on the stress distribution and displacement of the craniomaxillary complex when using RME is greater than MSE. The lateral displacement of the palatal suture of MSE is significantly larger than that of RME. It is more prone to tipping movement of the anchor teeth using RME under normal palate, and MSE may manage the vertical control better due to the smaller crown/root ratio than RME and intrusive movement of molars., (© 2024 The Author(s). Clinical and Experimental Dental Research published by John Wiley & Sons Ltd.)

Objectives: Comparison of maxillary, mandibular, dental crown and root mineral density in human skeletons identified in historical excavations with today's human maxillary, mandibular dental crown and root., Methods: After the skull images were obtained, four groups were created: maxilla 1, mandible 1 from the old period, maxilla 2 from the images taken from today's patients, and mandible 2 from the images taken from today's patients. Seventeen skeletons were previously classified as young age, middle age, and older age. Among the archive tomography images, 17 images from young (15-35), middle (36-56) and older (57 and over) age images were included in the study. HU value of the desired region was calculated automatically by the device using Region of interest (ROI)., Results: In this study, 34 jaws and 68 teeth were evaluated, including 7 mandibles and 10 maxillae from the late Roman period, and 8 mandibles and 9 maxillae from today's people. The average HU value of the crowns of mandibular anterior teeth from the late Roman period was measured as 2406.0. The average HU value of the crowns of maxillary anterior teeth was found to be 3383.8. In the posterior aspect, the average crown HU value measured in the maxilla was found to be higher than that in the mandible., Conclusions: The finding showed that the density of dental tissues of ancient people, such as enamel and dentin forming the crown, and cementum and dentin forming the root, was significantly higher than today's people., Competing Interests: Conflict of interests The authors declare that they have no conflict of interests., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Purpose: The purpose of the study was to investigate the influence of different preparation designs and scan patterns on the accuracy of intraoral scans for complete-arch maxillary laminate veneers., Materials and Methods: Three maxillary typodonts were used to obtain reference models with three different laminate veneer preparation designs: windows (W), beveled (B), and incisal overlap (IO). Reference scans were obtained with a desktop scanner. A total of 90 complete arch intraoral scans were made with an intraoral scanner (Medit i700) following three different scan patterns: straight motion (SM), zigzag motion (ZM), and combined motion (CM). Ten scans were made in each subgroup and exported as standard tessellation language (STL) files. Assessment of accuracy was conducted with a 3D software analysis program (Geomagic Control X). Each STL file was individually aligned with the reference scan using the best fit algorithm tool, and 3D differences were calculated using the root mean square (RMS) value. Two-way analysis of variance (ANOVA) followed by post hoc comparison tests were applied to analyze precision and trueness data (α = 0.05)., Results: Two-way ANOVA and post hoc comparison tests revealed significant differences among different preparation designs and scan patterns (p < 0.05). Regarding trueness, the IO when scanned with SM presented higher mean RMS than the other preparation designs (W and B) scanned with the same scanning pattern (p < 0.05). Regarding precision, the groups of W and IO presented significantly higher mean RMS than the group of B when scanned with ZM (p < 0.05)., Conclusions: Accuracy of intraoral scans for complete-arch laminate veneers was affected by different laminate veneer preparation designs and scan patterns., Clinical Significance: Modifying scan pattern according to preparation design helps to improve scan accuracy for complete-arch laminate veneers., (© 2024 The Author(s). Journal of Esthetic and Restorative Dentistry published by Wiley Periodicals LLC.)

Background: The determination of the maxillary occlusal plane presents a significant clinical challenge in the treatment of edentulous patients as well as it is critical for complex full-mouth reconstructions in dentate patients, including those with implant-supported rehabilitations. While the use of a Fox plane plate is standard in edentulous cases, its application in dentate patients lacks thorough documentation in existing literature., Purpose: This clinical study assessed the sagittal position of the maxillary dentition in relation to facial landmarks using a digital three-dimensional analysis and evaluated the suitability and reliability of applying a simulated Fox plane plate, also known as an occlusal plane guide, in dentate patients., Materials and Methods: Eighty-one subjects were recruited at the Department of Prosthetic Dentistry of Goethe University Frankfurt, Germany, according to specific inclusion criteria. Intraoral and facial scans were obtained and analyzed using GOM Inspect Pro software (GOM, Braunschweig, Germany). The angles between the maxillary occlusal plane and three variations each of Camper's plane and ala-tragus line, relating to superior, middle, and inferior tragus points, were measured. These modified planes were then compared to a plane established by a simulated digital Fox plane plate, which was adapted to the maxillary anterior teeth and the lowest point of the posterior teeth in both quadrants., Results: A total of 81 subjects (58 female and 23 male) with a mean age of 23.9 years were evaluated in this study. No significant angular difference was found between the angles of the maxillary occlusal plane compared with superior Camper's plane, middle Camper's plane, or superior ala-tragus line (p >0.05). The smallest angle occurred between superior Camper's plane and the maxillary occlusal plane on both the right (3.443°) and left (3.535°) sides. The application of a Fox plane plate resulted in two different occlusal planes in 70% of patients, significantly deviating from the digitally determined plane (p <0.05)., Conclusion: Superior and middle Camper's planes, along with superior ala-tragus line, can be considered approximately parallel reference planes and are suitable for routine determining of the maxillary occlusal plane in restorative treatments. However, in contrast to digital evaluation methods, the application of a Fox plane plate in dentate patients showed high variability, indicating its low reproducibility due to its ambiguous positioning on the maxillary dentition. Clinical trial registration site: https://drks.de/search/de/trial/DRKS00030166., (© 2024 The Author(s). Clinical Implant Dentistry and Related Research published by Wiley Periodicals LLC.)

Conventional gingivoperiosteoplasty (GPP) performed during infancy adversely affects maxillary development. However, the outcomes of this procedure in early childhood have rarely been reported. Therefore, we examined the postoperative outcomes of GPP conducted in patients aged 1.5 years with unilateral cleft lip and palate (UCLP). This study included 87 non-syndromic patients with complete UCLP who had undergone early two-stage palatoplasty during the 1999-2004 period. The protocol comprised soft palate plasty at 1 year of age and hard palate closure at 1.5 years of age. In the GPP group (n = 34), we introduced the GPP procedure during hard palate closure; in the non-GPP group (n = 53), the labial side of the alveolar cleft remained intact. We examined computed tomography images taken at 8 years of age to observe bone formation at the alveolar cleft site. We also conducted cephalometric analysis to examine maxillary development at 12 years of age. Bone bridges at the alveolar cleft site were observed in 92% and 5.6% of the GPP and non-GPP groups, respectively. Moreover, 56% of the GPP group did not require secondary alveolar bone grafting (sABG), whereas all the patients in the non-GPP group underwent sABG. No statistically significant differences were noted in the maxillary anteroposterior length (GPP: 45.5 ± 3.7 mm, non-GPP: 45.9 ± 3.5 mm, p = 0.67) and sella-nasion-point A angle (GPP: 75.6 ± 4.5°, non-GPP: 73.8 ± 12.6°, p = 0.49). This study's findings suggest that GPP performed at 1.5 years of age minimises the necessity of sABG and does not exert a negative influence on maxillofacial development., (Copyright © 2024 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.)

Objectives: To propose a method for evaluating the coordination of maxillomandibular alveolar arch in transverse dimension with cone-beam computed tomography (CBCT) and to apply this method to subjects with normal occlusion at different dentition stages or transverse discrepancy., Materials and Methods: Digital data of 130 patients with normal occlusion at different dentition stages or transverse discrepancy were collected for three-dimensional reconstruction. The patients with normal occlusion were divided into Group 1 (>16 years) and Group 2 (≤16 years) based on their age. Adult patients with posterior crossbite were divided into the Group 3. According to the proposed method, the average alveolar arch coordination angle (AACA) and other parameters were analysed in each group. Group 1 was considered as the control group and compared with Group 2 and Group 3., Results: Significant differences were observed in the maxillary posterior segment width among patients with normal occlusion. Group 3 demonstrated increased AACA and mandibular alveolar arch width compared with the normal occlusion group. Pearson correlation analysis indicated a positive relationship between maxillomandibular alveolar arch widths in the normal occlusion groups, with a strong correlation between AACA and the disparity in maxillomandibular widths., Conclusion: Adults with normal occlusion exhibit significantly wider maxillary posterior alveolar arches than adolescents, with no marked difference in mandibular widths. The posterior crossbite group showed broader mandibular alveolar arches. There was a strong correlation between AACA and the difference in maxillomandibular widths. This study's method shows potential value for orthodontic transverse diagnosis., (© 2024 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objective: To investigate the changes in condyle-glenoid fossa relationship after maxillary skeletal expansion (MSE) and to verify the correlation between the condyle positional changes and expansion effect., Methods: In this study, 20 patients (mean age 21.1 ± 5.7 years, 8 male, 12 female) with maxillary transverse deficiency (MTD) were treated with the MSE appliance, which contained molar bands and a expander with four micro-implants. The CBCT images were taken before expansion (T0), after expansion (T1) and after 6 months of maintenance (T2). The posterior TMJ space (PS), superior TMJ space (SS), anterior TMJ space, coronal lateral TMJ space (CLS), coronal medial TMJ space (CMS), condyle axis angle, maxillary basal bone width (BWM), inter-molars width, nasal bone width, molar inclination and molar palatal cusp height (U6H) were measured using Dolphin Imaging., Results: At T1, compared with T0, the PS and SS significantly increased by 0.41 mm (P = .008) and 0.3 mm (P = .007). But only the SS significantly increased by 0.21 mm (P = .025) at T2. There was a significant difference of 0.37 mm (left-right, P = .014) between the left and right SS at T0, but no significant difference at T1 and T2. The increased BMW showed weak positive correlations with the change of PS (P = .015) and CMS (P = .031), and the decreased U6H showed weak negative correlations with the change of PS (P = .015) and CLS (P = .031) at T1., Conclusions: The use of MSE led to an increase in the SS and PS, which were weakly correlated with BWM and U6H. But this effect in the TMJ space gradually diminished after 6 months of maintenance, and the symmetry of the condyle-fossa relationship was preserved., (© 2024 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Background: This study aimed to investigate the differences in the buccolingual inclination and transverse width of maxillary and mandibular first molars among different vertical facial types., Methods: In all, 78 samples were divided into three groups based on the GoGn-SN angle: the low-angle group (n = 26, mean age=24.21±5.11), average-angle group (n = 26, mean age=22.66±3.72), and high-angle group (n = 26, mean age=22.23±2.43). Cone beam computed tomography (CBCT) measurements were used to assess the buccolingual inclination of the axis of the maxillary and mandibular first molars, as well as the buccolingual inclination of the alveolar bone, the dental arch width, and the basal bone width. One-way ANOVA, the LSD test, and Pearson correlation analysis were performed., Results: The high-angle group showed significantly greater lingual inclination of the maxillary alveolar bone than the low-angle group and average-angle group (p < 0.001; p < 0.05). The difference in buccolingual inclination of the axis of the maxillary first molar and the alveolar bone was significantly greater in the high-angle group than in the low-angle group (p < 0.05). Both the maxillary and mandibular dental arch were significantly narrower in the high-angle group than in the other two groups. The mandibular basal bone was also significantly narrower in the high-angle group than in the low-angle group and average-angle group (p < 0.001; p < 0.01)., Conclusions: The alveolar bone of maxillary first molar in the high-angle group was more palatal inclined than that the low-angle group and the average-angle group, which suggests that orthodontists should pay more attention to the root-bone relationship in the high-angle group during expansion treatment to prevent bone fenestration and dehiscense., Competing Interests: Declaration of competing interest None., (Copyright © 2024 The Authors. Published by Elsevier Masson SAS.. All rights reserved.)

Objectives: To compare miniscrew versus bone tracing registration methods on dental implant placement accuracy and time efficiency in edentulous jaws using a dynamic computer-assisted implant surgery (d-CAIS) system., Methods: Twelve fully edentulous maxillary models were allocated into two groups: miniscrew tracing (MST) group, where registration was performed by tracing four miniscrews; and bone tracing (BT) group, where registration was conducted by tracing maxillary bone fiducial landmarks. Six implants were placed on each model using the X-Guide® d-CAIS system. Pre- and postoperative cone-beam computed tomography (CBCT) scans were superimposed to evaluate implant placement accuracy. The time required for registration and the overall surgery time were also recorded., Results: Thirty-six implants were placed in each group. The MST group showed significantly lower mean angulation deviations (mean difference (MD): -3.33°; 95 % confidence interval (CI): -6.56 to -0.09); p = 0.044), 3D platform deviations (MD: -1.01 mm; 95 % CI: -1.74 to -0.29; p = 0.006), 2D platform deviations (MD: -0.97 mm; 95 % CI: -1.71 to -0.23; p = 0.010), and 3D apex deviations (MD: -1.18 mm; 95 % CI: -1.92 to -0.44; p = 0.002) versus the BT group. The overall surgery time was similar for both groups (MD: 6.10 min.; 95 % CI: -0.31 to 12.51; p = 0.06), though bone tracing required significantly more time compared with miniscrew registration (MD: 4.79 min.; 95 % CI: 2.96 to 6.62; p < 0.05)., Conclusions: Registration with MST increases the accuracy of implant placement with a d-CAIS system in edentulous jaws compared with the BT method, and slightly reduces the overall surgery time., Clinical Significance: Miniscrew tracing registration improves implant placement accuracy in comparison with bone tracing registration., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: The authors declare that they have no known competing financial interests or personal relationships directly related with this study. However, they would like to declare the following interests outside the submitted work: Dr. Octavi Camps-Font reports grants and non-financial support from Avinent (Santpedor, Spain), and non-financial support from Nobel Biocare (Zürich, Switzerland) outside the submitted work. Dr. Rui Figueiredo reports grants, personal fees, and non-financial support from MozoGrau (Valladolid, Spain), Avinent (Santpedor, Spain), Inibsa Dental (Lliçà de Vall, Spain), Dentaid SL (Cerdanyola del Vallés, Spain), non-financial support from Nobel Biocare (Zürich, Switzerland), personal fees from Geistlich Pharma AG (Wolhusen, Switzerland), BioHorizons Iberica (Madrid, Spain), Araguaney Dental (Barcelona, Spain), Septodont (Saint-Maur-des-fossés, France) and Laboratorios Silanes (Mexico city, Mexico) outside the submitted work. Dr. Figueiredo has also participated as a principal investigator in a randomized clinical trial sponsored by Mundipharma (Cambridge, UK) and in another clinical trial as a sub-investigator for Menarini Richerche (Florence, Italy). Dr. Eduard Valmaseda-Castellón reports grants, personal fees, and non-financial support from MozoGrau (Valladolid, Spain), Avinent (Santpedor, Spain), Inibsa Dental (Lliçà de Vall, Spain), Dentaid SL (Cerdanyola del Vallés, Spain), and personal fees from BioHorizons Iberica (Madrid, Spain) and Laboratorios Silanes (Mexico city, Mexico) outside the submitted work. Dr. Eduard Valmaseda-Castellón has also participated as a principal investigator in a randomized clinical trial sponsored by Geistlich Pharma AG (Wolhusen, Switzerland) and in another clinical trial as a sub-investigator for Mundipharma (Cambridge, UK)., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Objectives: This study compared the accuracy of seven intraoral scanners (IOS) by the virtual-fit method., Methods: Four maxillary arches with tooth abutments were scanned with an industrial reference scanner (n=1) and by Aoralscan3, EmeraldS, Helios600, Lumina, Mediti700, Primescan, and Trios5 IOSs (each n=12). Two complete-arch fixed frameworks were designed on each IOS scan with a 70 µm (group 70) and a 90 µm internal cement space (group 70+20, additional 20 µm at the margin). The virtual-fit method was comprised of superimposing the framework designs onto the reference scan using a non-penetrating algorithm simulating the clinical try-in. Internal and marginal gaps were measured. Precision was estimated by the mean absolute errors (MAE)., Results: In group 70, Mediti700 (43 µm), Primescan (42 µm), and EmeraldS were in the best homogenous subset for the marginal gap, followed by the Lumina (67 µm), Aoralscan3 (70 µm), and Trios5 (70 µm), whereas Helios600 (118 µm) was in the third subset. Based on the MAE at the margin, Mediti700, Trios5, and EmeraldS were in the first-best homogenous subset, followed by Primescan. Lumina and Helios600 were in the third subset, and Aoralscan3 was in the fourth subset. In group 70+20, the marginal gap was significantly decreased for Lumina and Aoralscan3, whereas MAE significantly decreased for EmeraldS and Aoralscan3. The rank of IOSs was similar for the internal gap., Conclusion: EmeraldS, Mediti700, Primescan, and Trios5 meet the marginal and internal fit criteria for fixed tooth-borne complete arch restorations. Increasing the cement space during design could enhance restoration fit., Clinical Significance: The virtual-fit alignment method can effectively evaluate the accuracy of different intraoral scanners, offering valuable clinical guidance for distinguishing among them. Recent software and hardware versions of long-standing IOS manufacturers are suitable for fabricating complete arch restoration., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Introduction: In edentulous maxillae, the anterior maxilla is the region of interest for implant placement due to posterior bone resorption and sinus pneumatization. This study aimed to assess variations in bone density in different regions of the edentulous maxilla according to sex and age, using cone beam computed tomography (CBCT)., Materials and Methods: 69 CBCT from edentulous maxilla were analyzed. Six virtual implants were planned between the maxillary sinuses at incisor, canine, and premolar sites. Bone densities (in Hounsfield units HU) were recorded at six points on the neck, body, and apex of the buccal and lingual areas of each virtual implant. We used the two-sample t-test to compare male and female bone densities, and the Spearman correlation coefficient to analyze the correlation between mean bone density and age. One-way analysis of variance with post hoc pairwise t-tests was used to analyze the differences in density between three sites of the edentulous maxilla and the differences in density between three parts of the implant. The significance level was set at 5%., Results: Mean bone density in males was significantly higher than in females. There was a significant correlation between mean bone density and age in females. Incisor sites showed the highest mean bone density, followed by canine and premolar sites. There was a significant decline in bone density from the neck to the apex., Conclusions: Bone density varied within and among edentulous maxillae. Bone density of the edentulous maxilla seemed to be influenced by age in women and by sex., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Masson SAS.. All rights reserved.)

The aim of this study was to compare preoperative and postoperative linear, planar, and volumetric measurements in the pharyngeal airway in orthognathic surgery patients. Preoperative and postoperative cone beam computed tomography (CBCT) images of 60 patients, who underwent maxillary advancement with mandibular setback (Group I, n=25) and bimaxillary advancement (Group II, n=35), were compared. The airway was divided into 3 regions as nasopharynx, oropharynx, and hypopharynx. Linear and planar measurements were made on the reference sections of each region. The minimum axial airway area, the volume of 3 regions, and total airway volume were also measured. Regarding the linear, planar, and volumetric measurements, while there was a statistically significant increase in the measurements for all three regions in Group II, in Group I only the measurements in the nasopharyngeal region demonstrated a statistically significant increase postoperatively ( P <0.05). There was an increase in minimum axial airway areas in both groups; however, it was only statistically significant in Group II ( P <0.05). There was a statistically significant increase in total airway volumes in both groups ( P <0.05). A positive and good correlation was found between the percent increase in the minimum axial area and the percent increase in the total volume ( P <0.05). While bimaxillary advancement surgery results in a significant increase in the pharyngeal airway, mandibular setback with maxillary advancement caused an increase in the total airway. Changes that may occur in the airway should be considered while planning orthognathic surgery., Competing Interests: The authors report no conflicts of interest., (Copyright © 2024 by Mutaz B. Habal, MD.)

Objective: This study aims to assess the expansive effects of pterygomaxillary disjunction (PMD) in surgically assisted rapid maxillary expansion (SARME) surgery using a meta-analysis approach., Materials and Methods: The study conducted a comprehensive literature search across five databases: PubMed, Scopus, Medline, Embase, and Cochrane, adhering to the PRISMA 2020 guidelines. Dental alterations were assessed using either cone-beam computed tomography (CBCT) or dental casts, while skeletal changes were exclusively measured from CBCT scans. We analysed the dentoskeletal changes between PMD +/- groups and conducted a within-group comparison. The primary focus of the results was on the mean differences observed in pre- and post-operative measurements., Results: Dental expansion was larger in the PMD+ group but not statistically significant. Skeletal expansion showed a significantly larger expansion in the posterior region in the PMD+ group (P = .033). Without PMD, anterior palatal expansion was significantly larger (P = .03), and the buccal tipping of posterior teeth was also significantly larger (P = .011) to achieve acceptable dental expansion outcomes., Conclusions: Both PMD +/- groups of SARME surgery can achieve satisfactory dental expansion outcomes. However, bone expansion and tooth inclination are also important factors that influence orthodontic treatment and post-expansion stability. By reducing the bony resistance with PMD, larger posterior palatal expansion and more parallel bony expansion are observed. In contrast, without PMD, there is smaller palatal expansion and greater tooth inclination in the posterior region. This could potentially lead to compromised periodontal conditions following expansion., (© 2024 The Authors. Orthodontics & Craniofacial Research published by John Wiley & Sons Ltd.)

Statement of Problem: Consideration of the thickness of alveolar bone on both the palatal and labial sides and the inclination angle of teeth is important for immediate implant placement in the maxillary anterior region. However, comprehensive research exploring how sex and age influence the thickness of bone and tooth angle in the maxillary anterior region is lacking., Purpose: The purpose of this clinical study was to investigate the effect of sex and age on the thickness of labial and palatal bone and on the tooth inclination angle of maxillary central and lateral incisors using cone beam computed tomography (CBCT) images in an Asian population., Material and Methods: The labial and palatal bone thickness and the inclination angle of maxillary central and lateral incisors were measured from the CBCT images of 149 participants aged between 20 and 65 years. The correlation between the angles of the maxillary central and lateral incisors and sex and age on the tooth angles and thicknesses of labial and palatal bone was determined statistically., Results: A high correlation (R=0.73) was found between the angle of maxillary central and lateral incisors. Men had higher angles of the maxillary central and lateral incisors and thicker palatal bone at the middle and root of the teeth compared with women. In both sexes, the angle and palatal bone thickness of maxillary central incisors were significantly higher than those of maxillary lateral incisors. The angle of both maxillary central and lateral incisors decreased gradually with age, with a difference in angle of over 10 degrees., Conclusions: The study revealed that women exhibited relatively thinner palatal bone compared with men. Additionally, participants aged between 40 and 65 years exhibited significantly thicker palatal bone compared with younger age groups, potentially providing a larger site for implant placement. Furthermore, tooth angle gradually decreases with age in the maxillary anterior region., (Copyright © 2024 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Statement of Problem: Scan path length and the presence of edentulous alveolar ridge sections have a negative influence on scanning accuracy. How different artificial landmarks combined with an adapted scanning method affect accuracy is unclear., Purpose: The purpose of this in vitro study was to determine the influence of 2 different artificial landmarks combined with an adapted scanning method on the scanning accuracy of a partially edentulous maxillary model., Material and Methods: The model simulated a maxilla with 6 prepared teeth to accommodate a complete arch fixed partial denture. Five ceramic precision balls (ball center P 1 -P 5 ), distributed buccally to the dental arch, were used to detect the dimensional and angular changes between the reference model and the intraoral scans. One intraoral scanner (Primescan) was used to make 30 scans each with either the scanning strategy recommended by the manufacturer (M) or with an adapted scanning strategy and the use of a bar (B) or 4 plates (P) as artificial landmarks in the dorsal palate. Data were statistically analyzed using a generalized least squares regression model (α=.05)., Results: Scanning with artificial landmarks reduced the maximum absolute distance deviations (M: 249 μm, B: 190 μm, P: 238 μm) and the maximum angle deviations (M: 0.31 degrees, B: 0.28 degrees, P: 0.26 degrees). Vertical distance deviations were improved by 10 to 50% with the use of artificial landmarks. Absolute mean distance deviations were significantly lower for group M (P<.001). In contrast, with artificial landmarks, mean angle (P<.001) and mean vertical distance deviations (P<.014) improved significantly., Conclusions: Scanning with artificial landmarks in the dorsal palate combined with an adapted scanning method improved the scanning accuracy and reliability of vertical distance deviations., (Copyright © 2022 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Objective: This retrospective single-centre study aimed to compare the efficacy of maxillary second molar intrusion with two different approaches, miniscrew-assisted molar intrusion and traditional segmental archwire intrusion, and to compare orthodontically induced external apical root resorption (OIERR) during intrusion between two groups via cone beam computed tomography (CBCT)., Materials and Methods: A total of 40 adult patients (33.6 ± 10.3 years old) with supraerupted maxillary second molars due to the loss of antagonistic teeth were recruited, with 20 patients in each group. A segmental archwire with adjacent teeth as an anchorage was used in the control group, and 60-100 g of intrusive force was applied by using miniscrews in the experimental group to intrude the overerupted molars. Full-volume CBCT was performed before and after intrusion, and the amount of intrusion and extent of OIERR of the overerupted molars were compared between the two groups., Results: Supraerupted maxillary second molars could be successfully intruded in an average of 5 months. There was more intrusive movement of the buccal and palatal cusps in the mininscrew group than that in the segmental archwire group (P < .05). The intrusive amount of palatal cusp was 3.67 ± 1.13 mm in the miniscrew group and 2.38 ± 0.74 mm in the segmental archwire group. More palatal OIERR was observed in the miniscrew group (30.3 ± 11.6 mm 3 ) than in the segmental archwire group (21.0 ± 8.66 mm 3 ) (P = .0063). There was no significant difference in OIERR between the two groups for mesial and distal buccal roots (P > .05)., Conclusion: Miniscrews help effectively with supraerupted maxillary second molar intrusion, especially for palatal cusps. There was more OIERR in the palatal root when using miniscrews compared to the segmental archwire approach., (© 2024 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Purpose: The purpose of this in vitro investigation was to assess how implant depth could affect the three-dimensional positional accuracy of digital impressions made from angulated implants., Materials and Methods: Four modified maxillary models were printed and divided into four study groups. In each model, two angulated implant analogs were placed at the sites of the first premolar and first molar at four different depths of 1 (G1), 2 (G2), 3 (G3), and 4 (G4) mm from the models' edentate area. Scan bodies were connected to the analogs, and one operator made 10 full-arch scans for each master model using an intraoral scanner. Afterward, the marginal gingival part of all models was removed, and digital scans were performed for each model using a laboratory scanner to achieve a reference STL file as the control group. One-way ANOVA and Leven's tests were used to measure and compare the 3D distance deviations across research groups after the superimposing test and control scans., Results: A significant difference between research groups was revealed by trueness and precision analysis (p < 0.001). The trueness and precision results obtained for G1 and G4 were significantly better than those for G2 and G3 (p < 0.05)., Conclusion: This study demonstrated that implant depth could affect the digital implant impressions' 3D positional accuracy., (© 2023 by the American College of Prosthodontists.)

Introduction: The stability of soft tissue volume around dental implants is an important factor for the final esthetic outcome. The main objective of this study was to compare volume stable collagen matrix (VCMX) versus connective tissue graft (CTG) in the augmentation of soft tissue profiles in single implant sites with a class I Siebert ridge defect., Materials and Methods: Twenty patients (14 females and 6 males) were enrolled in the present study. After implant placement and augmentation of the buccal defect by VCMX or CTG, post-operative evaluation of the volumetric changes at the augmented implant site was carried out at 3, 6, and 9 months as primary outcome, clinical and radiographic soft tissue thickness were carried out at baseline and 9-month intervals, visual analog scale (VAS) and oral health impact profile-14 (OHIP14) were recorded 2 weeks after the surgery., Results: A statistically significant difference in soft tissue volume was found between baseline and 3, 6, and 9 months postoperatively in both groups with the highest value at 9 months (136.33 ± 86.80) (mm 3 ) in VCMX and (186.38 ± 57.52) (mm 3 ) in CTG. Soft tissue thickness was significantly increased in both groups at 9 months in comparison to baseline. However, there was a significantly higher increase in soft tissue thickness at 9 months in CTG (3.87 ± 0.91) than in VCMX (2.94 ± 0.31). Regarding the radiographic soft tissue thickness, there was a statistically significant increase in both groups at 9 months in comparison to baseline. However, there was a statistically higher increase in the radiographic soft tissue thickness at 9 months in CTG (3.08 ± 0.97) than in VCMX (2.37 ± 0.29). VAS showed a statistically lower value in VCMX (0.4 ± 0.7) than CTG (2.8 ± 1.48). The OHIP recorded lower values in the VCMX group than the CTG group with no statistical significance. In addition, there was no difference in the PES between the two groups., Conclusion: The present study showed that CTG and VCMX were both effective in soft tissue augmentation around implants in the esthetic zone. However, CTG proved more efficient in increasing peri-implant soft tissue volume and mucosal thickness around single implants at a 9-month follow-up period. VCMX was associated with less pain or discomfort and reduced patient morbidity, as reflected by the significantly reduced VAS value in the VCMX group., (© 2024 Wiley Periodicals LLC.)

Objectives: Occlusal-based virtual surgical planning (VSP) prioritises the placement of endosseous dental implants, over replicating native bone contour. This may compromise facial aesthetics. This study aimed to compare function and health-related quality of life (HRQOL) following maxillomandibular reconstruction according to the ability to replicate preoperative soft-tissue contour and virtual plan., Materials and Methods: Patients who underwent occlusal based VSP osseous free flap reconstruction of the maxilla or mandible with high-resolution pre- and post-operative facial computerised tomography imaging and completed the FACE-Q questionnaire were retrospectively identified. Accuracy of reconstruction compared to preoperative soft tissue contour and virtual plan, was measured using 3DSlicer® and CloudCompare® in three dimensions. Random effects modelling determined the associations between bony and soft tissue accuracy and HRQOL/functional domains., Results: Twenty-two patients met the inclusion criteria. For mandibular and maxillary reconstructions, better soft tissue accuracy was associated with improved appearance (p = 0.048) and appearance distress (p = 0.034). For mandibular reconstructions, better soft tissue accuracy was associated with improved smile (p = 0.039) and smile distress (p = 0.031). For maxillary reconstructions, better bony accuracy was associated with improved appearance (p = 0.023) and drooling distress (p = 0.001). Unexpectedly, better bony accuracy was associated with worse eating and drinking (p = 0.015), oral competence (p = 0.005) and eating distress (p = 0.013) in mandibular reconstructions., Conclusion: Whilst soft tissue accuracy was associated with better functional and HRQOL outcomes, bone accuracy was associated with worse oral function or distress in mandibular reconstruction. These results require validation but should be considered when performing occlusal-based VSP, which prioritises dental rehabilitation over replicating facial bony contour., (Crown Copyright © 2024. Published by Elsevier Ltd. All rights reserved.)

This study was performed to evaluate the impact on the upper airway and nasal cavity of a new minimally invasive surgical and miniscrew-assisted rapid palatal expansion (MISMARPE) technique for the treatment of adult patients with transverse maxillary deficiency, in comparison to surgically assisted rapid palatal expansion (SARPE). Computed tomography scans of 21 MISMARPE and 16 SARPE patients were obtained preoperatively (T0) and at the end of the activation period (T1) and analysed. Linear and volumetric measurements were performed in the dental, alveolar, nasal cavity, and oropharynx regions. Generalised estimating equations were used to consider the intervention time and surgery type, and their interaction. In both groups, measurements were increased at T1 (P < 0.001), except for oropharynx volume (P > 0.05). A greater expansion in nasal cavity floor and median palatal suture was shown for MISMARPE when compared to SARPE (P < 0.001), with the same degree of expander activation (P = 0.094). A trapezoidal (coronal plane) and 'V' shape (axial plane) expansion pattern, was observed after MISMARPE. Both surgical techniques were effective for maxillary expansion in adults. However, MISMARPE was performed without osteotomy of the pterygomaxillary suture, in an outpatient setting and with local anaesthesia., (Copyright © 2024 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Objective: To assess a newly developed intraoral scan protocol in enhancing the accuracy of complete-arch implant impressions., Materials and Methods: Four impression approaches were applied to the same maxillary edentulous model with 6 implants: (1) intraoral scan (IOS), (2) intraoral scan with scan aid (IOS-SA), (3) calibrated intraoral scan protocol (CISP), and (4) conventional splinted open-tray impression (CONV). Each approach was repeated 10 times, and a direct scan of the model with a desktop scanner was used as a reference model. The alignment of scans and the reference model was conducted by two methods: (a) aligning all scan bodies to evaluate the overall fit, and (b) aligning the first and second scan bodies to simulate the Sheffield fit test for passive fitting of multiple implant-supported prostheses. Linear deviations from the reference model (trueness) and within each group (precision) were analyzed using Python scripts., Results: When aligned by all scan bodies, the CISP group exhibited comparable mean trueness (38.33 μm) and precision (45.97 μm) to the CONV group (44.30 and 47.92 μm respectively), both of which significantly outperformed the IOS group (86.82 and 83.17 μm, respectively). Furthermore, in the virtual Sheffield fit test, the CISP group achieved the highest levels of mean trueness at the end span (121.7 μm), making a linear deviation reduction of 36.7%, 60%, and 41.4% when compared to the CONV, the IOS, and the IOS-SA groups, respectively. Moreover, the CISP group (104.3 μm) displayed a remarkable 65, 182, and 86 μm advantage in precision over the CONV, IOS, and IOS-SA groups, respectively., Conclusion: CISP demonstrated comparable accuracy to the gold standard, the conventional splinted open-tray impression. Furthermore, it excelled in the virtual passive fitting test., (© 2024 The Authors. Clinical Implant Dentistry and Related Research published by Wiley Periodicals LLC.)

Objectives: The aim of this study was to evaluate esthetic parameters in the anterior maxillary region by comparing single-piece zirconia versus titanium narrow-diameter implants. Additionally, clinical, radiological and patient-reported outcome measures (PROMs) were analyzed., Materials and Methods: Thirty implants (tissue level implant) were placed in 30 patients in the maxillary esthetic sector. Depending on randomization, a zirconia (test) or titanium implant (control) was placed. Esthetic, clinical, and radiological parameters, including the implant crown esthetic index (ICAI), pink esthetic score (PES), probing pocket depth, bleeding on probing, plaque index, and marginal bone levels, were evaluated at 12, 36 and 60 months after loading., Results: Sixty months after crown placement, no significant differences were found between groups. The ICAI values were 5.25 ± 4.21 and 4.50 ± 2.98 for the test and control groups, respectively. The corresponding PES values were 7.44 ± 1.93 and 7.43 ± 1.74 for the test and control groups, respectively. There were no significant intergroup differences for the rest of the parameters evaluated., Conclusion: It can be suggested that monotype zirconia implants may serve as a potential alternative to titanium implants in selected clinical scenarios. While the results demonstrated comparable esthetic, clinical, and radiological aspects for zirconia implants as compared to titanium implants after a 5-year follow-up period, further research with larger sample sizes and longer-term follow-up is recommended., (© 2024 The Author(s). Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

Introduction: This study investigates the feasibility of a dynamic navigation system (DNS) small field of view workflow (DNS-SFOVw) for fiber-post removal and compares its accuracy and efficiency to the conventional large field of view workflow (DNS-LFOVw)., Methods: Fifty-six extracted human maxillary molars were divided into DNS-SFOVw (n = 28) and DNS-LFOVw (n = 28). The palatal canal was restored with an intraradicular RelyX fiber post and luted with RelyX Unicem; a core buildup was used. Teeth were mounted in a 3D-printed surgical jaw. A preoperative cone-beam computed tomography (CBCT) scan was taken with a 40 × 40 mm FOV for the DNS-SFOVw and a single arch CBCT scan for the DNS-LFOVw. The drilling entry point, trajectory, angle, and depth were planned in the X-guide software. The DNS registration method for the DNS-SFOVw was virtual-based registration on teeth, and the marker point-based method was used for the DNS-LFOVw. The fiber posts were drilled out under DNS guidance. A postoperative CBCT scan was taken. Three-dimensional deviations, angular deflection, number of mishaps, registration, and total operation time were calculated., Results: The DNS-SFOVw was as accurate as DNS-LFOVw (P > .05). The DNS-LFOVw registration time was less than DNS-SFOVw (P < .05). There was no difference in the number of mishaps (P > .05). Both DNS-SFOVw and DNS-LFOVw were time-efficient, with DNS-LFOVw taking less total operational time (P < .05)., Conclusion: Within the limitations of this in-vitro study, the DNS-SFOVw was as accurate as the DNS-LFOVw for fiberpost removal. Both DNS-LFOVw and DNS-SFOVw were time-efficient in removing fiber-posts., (Copyright © 2024 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.)

The purpose of this study was to explore maxillary lateral incisors (MxLI) intern morphology by analyzing existing literature. We searched five electronical databases (Cochrane, Embase, LILACS, Scopus, MEDLINE via PubMed) using keywords and predefined search terms. Additional studies were identified by cross-referencing and reviewing bibliographies of relevant articles. From 92 initial studies, 27 duplicates were removed, and 65 records screened. After full-text review and hand searching were 19 studies included. The most reported root canal configurations (RCC) of MxLI were Vertucci (Ve) I (1-1-1/1; 78.1-100%), Ve II (2-2-1/1; 0.2-5%), Ve III (1-2-1/1; 0.1-14.6%), Ve IV (2-2-2/2; 0.5%), and Ve V (1-1-2/2; 0.5-4.9%). A meta-analysis of six studies from Europe and Asia indicated sex-differentiated patterns in RCC prevalence: higher occurrences of Ve II (2-2-1/1; OR [95%CI] = 1.19 [0.51, 2.73]), Ve III (1-2-1/1; (OR [95%CI] = 1.72 [0.61, 4.85]), and Ve V (1-1-2/2; (OR [95%CI] = 2.95 [1.02, 8.55]) configurations were noted in males, whereas females predominantly exhibited Ve I (1-1-1/1; [95%CI] = 0.99 [0.97, 1.02]), and Ve IV (2-2-2/2; (OR [95%CI] = 0.11 [0.01, 2.02]). Examination methods varied, with cone beam computed tomography (CBCT) being most commonly (n = 11), followed by staining & clearing (n = 5), and radiographic analysis (n = 1). The predominant RCC in MxLI is type Vertucci I. CBCT is the most common method for assessing the morphology of root canals. However, up to 20% of cases may present with complex and sex-specific patterns, highlighting the need for clinicians to be aware of these differences to prevent complications during endodontic treatments., (© 2024. The Author(s).)

Background: This study highlights the need for precise and efficient methods to measure palatal mucosal thickness in the maxillary anterior teeth, particularly for soft tissue augmentation in the aesthetic zone. The research evaluates three digital imaging techniques, suggesting that Cone Beam Computed Tomography (CBCT) combined with intraoral scanners (IOS) is a promising approach for reliable clinical assessment., Methods: Ten volunteers with healthy periodontium were selected, and three methods were employed: CBCT-based indirect gingival imaging, modified soft tissue CBCT (ST-CBCT), and CBCT combined with IOS. Measurements of palatal mucosal thickness were taken at multiple points along the palatal gingival margin. Statistical analysis included Bland-Altman plots for method agreement and intraclass Correlation Coefficient (ICC) analysis for reliability. All measurements were standardized, repeated for consistency, and accurate to 0.01 mm to ensure reliability., Results: The Bland-Altman plots showed that less than 5% of the points for palatal mucosal thickness differences measured by the gingival indirect radiographic method, modified ST-CBCT, and CBCT combined with IOS were located outside the 95% limits of agreement (LoA). The mean value of the differences was within 0.2 mm, indicating good clinical agreement among the three methods. The inter- and intra-study ICC values for palatal mucosal thickness measurements of the maxillary anterior teeth using the three CBCT methods were greater than 0.75 (P < 0.001), demonstrating reproducibility., Conclusions: Based on the evaluation of three digital imaging techniques, this study indicates that the combination of CBCT with IOS is a feasible method for measuring palatal mucosal thickness in the maxillary anterior teeth and demonstrates good reproducibility., (© 2024. The Author(s).)

Aim: To evaluate the influence of different levels of metal artifact reduction (MAR) tool and milliamperage (mA) on the diagnosis of fracture extension in endodontically treated teeth using cone beam CT (CBCT)., Materials and Methods: Ten maxillary premolars were endodontically treated and positioned in the empty sockets of a human maxilla covered with wax. CBCT acquisitions were performed using the Eagle Edge device (Dabi Atlante, Brazil) adjusted to 120 kVp, FOV of 4 × 6 cm, exposure time of 24 s and voxel size of 0.2 mm in 8 different conditions with different MAR (1, 2 and 3) and mA (3.2 and 6.3) levels. Crown-root fractures were simulated in the universal testing machine, and CBCT images were acquired again. Five radiologists evaluated the presence and extension of fractures with a 5-point scale. Statistical analysis was performed by analysis of variance, Tukey and Kappa test (α = 0.05)., Results: Although different mA levels did not significantly (p > 0.05) affect the diagnosis values for fracture presence and extension, when evaluated the different levels of MAR, AUC and sensitivity showed significantly higher values (p < 0.05) for MAR 0 using 6.3 mA and kappa agreement showed significantly higher values (p < 0.05) for MAR 0 and 2 using 6.3 mA., Conclusions: Although mA levels do not have a diagnostic effect when isolating the MAR level; in 6.3 mA, MAR 0 and 2 can positively influence the diagnosis of fracture extension in endodontically treated teeth using CBCT., Clinical Relevance: The isolate evaluation of dental fracture presence can overlook diagnostics error of its extension., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)