Search

Noncovalent interactions are essential in the formation and properties of a diverse range of hybrid materials. However, reliably identifying the noncovalent interactions in nanocrystalline materials remains challenging using conventional methods such as X-ray diffraction and spectroscopy. Here, we demonstrate that accurate atomic positions including hydrogen atoms can be determined using three-dimensional electron diffraction (3D ED), from which the entire range of noncovalent interactions in a nanocrystalline aluminophosphate hybrid material SCM-34 are directly visualized. The protonation states of both the inorganic and organic components in SCM-34 are determined from the hydrogen positions. All noncovalent interactions, including hydrogen-bonding, electrostatic, π-π stacking, and van der Waals interactions, are unambiguously identified, which provides detailed insights into the formation of the material. The 3D ED data also allow us to distinguish different types of covalent bonds based on their bond lengths and to identify an elongated terminal P═O π-bond caused by noncovalent interactions. Our results show that 3D ED can be a powerful tool for resolving detailed noncovalent interactions in nanocrystalline materials. This can improve our understanding of hybrid systems and guide the development of novel functional materials.

Structures of two globular proteins were determined ab initio using microcrystal electron diffraction (MicroED) data that were collected on a direct electron detector in counting mode. Microcrystals were identified using a scanning electron microscope (SEM) and thinned with a focused ion beam (FIB) to produce crystalline lamellae of ideal thickness. Continuous-rotation data were collected using an ultra-low exposure rate to enable electron counting in diffraction. For the first sample, triclinic lysozyme extending to a resolution of 0.87 Å, an ideal helical fragment of only three alanine residues provided initial phases. These phases were improved using density modification, allowing the entire atomic structure to be built automatically. A similar approach was successful on a second macromolecular sample, proteinase K, which is much larger and diffracted to a resolution of 1.5 Å. These results demonstrate that macromolecules can be determined to sub-ångström resolution by MicroED and that ab initio phasing can be successfully applied to counting data.

Electron diffraction enables structure determination of organic small molecules using crystals that are too small for conventional X-ray crystallography. However, because of uncertainties in the experimental parameters, notably the detector distance, the unit-cell parameters and the geometry of the structural models are typically less accurate and precise compared with results obtained by X-ray diffraction. Here, an iterative procedure to optimize the unit-cell parameters obtained from electron diffraction using idealized restraints is proposed. The cell optimization routine has been implemented as part of the structure refinement, and a gradual improvement in lattice parameters and data quality is demonstrated. It is shown that cell optimization, optionally combined with geometrical corrections for any apparent detector distortions, benefits refinement of electron diffraction data in small-molecule crystallography and leads to more accurate structural models.

The current status and ongoing development of 3D electron diffraction and microcrystal electron diffraction in macromolecular crystallography are reviewed., Microcrystal electron diffraction (MicroED) has recently emerged as a promising method for macromolecular structure determination in structural biology. Since the first protein structure was determined in 2013, the method has been evolving rapidly. Several protein structures have been determined and various studies indicate that MicroED is capable of (i) revealing atomic structures with charges, (ii) solving new protein structures by molecular replacement, (iii) visualizing ligand-binding interactions and (iv) determining membrane-protein structures from microcrystals embedded in lipidic mesophases. However, further development and optimization is required to make MicroED experiments more accurate and more accessible to the structural biology community. Here, we provide an overview of the current status of the field, and highlight the ongoing development, to provide an indication of where the field may be going in the coming years. We anticipate that MicroED will become a robust method for macromolecular structure determination, complementing existing methods in structural biology.

Structures of two globular proteins were determined ab initio using microcrystal electron diffraction (MicroED) data that was collected on a direct electron detector in counting mode. Microcrystals were identified using a scanning electron microscope (SEM) and thinned with a focused ion-beam (FIB) to produce crystalline lamellae of ideal thickness. Continuous rotation data were collected using an ultra-low exposure rate on a Falcon 4 direct electron detector in electron-counting mode. For the first sample, triclinic lysozyme extending to 0.87 Å resolution, an ideal helical fragment of only three alanine residues provided initial phases. These phases were improved using density modification, allowing the entire atomic structure to be built automatically. A similar approach was successful on a second macromolecular sample, proteinase K, which is much larger and diffracted to a modest 1.5 Å resolution. These results demonstrate that macromolecules can be determined to sub-Ångström resolution by MicroED and that ab initio phasing can be successfully applied to counting data collected on a direct electron detector.

Structures of two globular proteins were determined ab initio using microcrystal electron diffraction (MicroED) data that were collected on a direct electron detector in counting mode. Microcrystals were identified using a scanning electron microscope (SEM) and thinned with a focused ion beam (FIB) to produce crystalline lamellae of ideal thickness. Continuous-rotation data were collected using an ultra-low exposure rate to enable electron counting in diffraction. For the first sample, triclinic lysozyme extending to a resolution of 0.87 Å, an ideal helical fragment of only three alanine residues provided initial phases. These phases were improved using density modification, allowing the entire atomic structure to be built automatically. A similar approach was successful on a second macromolecular sample, proteinase K, which is much larger and diffracted to a resolution of 1.5 Å. These results demonstrate that macromolecules can be determined to sub-ångström resolution by MicroED and that ab initio phasing can be successfully applied to counting data.

Significance A systematic investigation of the effects of sample thickness on electron scattering in electron cryo-microscopy (cryo-EM) was previously not feasible. Here, methods are employed to investigate the effects of increasing sample thickness. Near identical protein crystals are used as samples, and microcrystal electron diffraction data are used to assess the effects of thickness. These experiments were conducted using the three most-common accelerating voltages in cryo-EM, and data were compared using the calculated inelastic mean free path. Structures may be determined using crystals up to twice the inelastic mean free path. No coherent information remains at thicknesses over four times the mean free path. This study provides limits for biological specimen thickness with implications for all cryo-EM methods., The relationship between sample thickness and quality of data obtained is investigated by microcrystal electron diffraction (MicroED). Several electron microscopy (EM) grids containing proteinase K microcrystals of similar sizes from the same crystallization batch were prepared. Each grid was transferred into a focused ion beam and a scanning electron microscope in which the crystals were then systematically thinned into lamellae between 95- and 1,650-nm thick. MicroED data were collected at either 120-, 200-, or 300-kV accelerating voltages. Lamellae thicknesses were expressed in multiples of the corresponding inelastic mean free path to allow the results from different acceleration voltages to be compared. The quality of the data and subsequently determined structures were assessed using standard crystallographic measures. Structures were reliably determined with similar quality from crystalline lamellae up to twice the inelastic mean free path. Lower resolution diffraction was observed at three times the mean free path for all three accelerating voltages, but the data quality was insufficient to yield structures. Finally, no coherent diffraction was observed from lamellae thicker than four times the calculated inelastic mean free path. This study benchmarks the ideal specimen thickness with implications for all cryo-EM methods.

3D electron diffraction has been used to follow polymorph evolution during the crystallization of glycine from pure water. All three known polymorphs formed sequentially in samples taken from the same solution and allowed to crystallize in situ at times between 3 and 60 min. Crystal structures were obtained for all three phases., 3D electron diffraction (3DED) has been used to follow polymorph evolution in the crystallization of glycine from aqueous solution. The three polymorphs of glycine which exist under ambient conditions follow the stability order β < α < γ. The least stable β polymorph forms within the first 3 min, but this begins to yield the α-form after only 1 min more. Both structures could be determined from continuous rotation electron diffraction data collected in less than 20 s on crystals of thickness ∼100 nm. Even though the γ-form is thermodynamically the most stable polymorph, kinetics favour the α-form, which dominates after prolonged standing. In the same sample, some β and one crystallite of the γ polymorph were also observed.

The relationship between sample thickness and quality of data obtained by microcrystal electron diffraction (MicroED) is investigated. Several EM grids containing proteinase K microcrystals of similar sizes from the same crystallization batch were prepared. Each grid was transferred into a focused ion-beam scanning electron microscope (FIB/SEM) where the crystals were then systematically thinned into lamellae between 95 nm and 1650 nm thick. MicroED data were collected at either 120, 200, or 300 kV accelerating voltages. Lamellae thicknesses were converted to multiples of the calculated inelastic mean free path (MFP) of electrons at each accelerating voltage to allow the results to be compared on a common scale. The quality of the data and subsequently determined structures were assessed using standard crystallographic measures. Structures were reliably determined from crystalline lamellae only up to twice the inelastic mean free path. Lower resolution diffraction was observed at three times the mean free path for all three accelerating voltages but the quality was insufficient to yield structures. No diffraction data were observed from lamellae thicker than four times the calculated inelastic mean free path. The quality of the determined structures and crystallographic statistics were similar for all lamellae up to 2x the inelastic mean free path in thickness, but quickly deteriorated at greater thicknesses. This study provides a benchmark with respect to the ideal limit for biological specimen thickness with implications for all cryo-EM methods.SignificanceA systematic investigation of the effects of thickness on electron scattering from protein crystals was previously not feasible, because there was no accurate method to control sample thickness. Here, the recently developed methods for preparing protein crystals into lamellae of precise thickness by ion-beam milling are used to investigate the effects of increasing sample thickness on MicroED data quality. These experiments were conducted using the three most common accelerating voltages in cryo-EM. Data across these accelerating voltages and thicknesses were compared on a common scale using their calculated inelastic mean free path lengths. It is found that structures may accurately be determined from crystals up to twice the inelastic mean free path length in thickness, regardless of the acceleration voltage.

MyD88 and MAL are Toll-like receptor (TLR) adaptors that signal to induce pro-inflammatory cytokine production. We previously observed that the TIR domain of MAL (MALTIR) forms filaments in vitro and induces formation of crystalline higher-order assemblies of the MyD88 TIR domain (MyD88TIR). These crystals are too small for conventional X-ray crystallography, but are ideally suited to structure determination by microcrystal electron diffraction (MicroED) and serial femtosecond crystallography (SFX). Here, we present MicroED and SFX structures of the MyD88TIR assembly, which reveal a two-stranded higher-order assembly arrangement of TIR domains analogous to that seen previously for MALTIR. We demonstrate via mutagenesis that the MyD88TIR assembly interfaces are critical for TLR4 signaling in vivo, and we show that MAL promotes unidirectional assembly of MyD88TIR. Collectively, our studies provide structural and mechanistic insight into TLR signal transduction and allow a direct comparison of the MicroED and SFX techniques., MAL and MyD88 are downstream adaptors of Toll-like receptors (TLR) and the MAL TIR domain forms filaments in vitro, which in turn nucleate the assembly of crystalline arrays of the MyD88 TIR domain. Here, the authors present the structure of these MyD88 TIR crystalline arrays solved by both microcrystal electron diffraction and serial femtosecond crystallography, and they show with mutagenesis experiments that MyD88 interface residues are important for TLR4 signaling in vivo.

A likelihood-based method is improved to correct for dynamical scattering in weakly diffracting protein nanocrystals. The method has been tested on three protein crystals and yielded better refinement statistics and structure interpretations, including charge estimations of bound ions., Electron diffraction allows protein structure determination when only nanosized crystals are available. Nevertheless, multiple elastic (or dynamical) scattering, which is prominent in electron diffraction, is a concern. Current methods for modeling dynamical scattering by multi-slice or Bloch wave approaches are not suitable for protein crystals because they are not designed to cope with large molecules. Here, dynamical scattering of nanocrystals of insulin, thermolysin and thaumatin was limited by collecting data from thin crystals. To accurately measure the weak diffraction signal from the few unit cells in the thin crystals, a low-noise hybrid pixel Timepix electron-counting detector was used. The remaining dynamical component was further reduced in refinement using a likelihood-based correction, which was introduced previously for analyzing electron diffraction data of small-molecule nanocrystals and was adapted here for protein crystals. The procedure is shown to notably improve the structural refinement, in one case allowing the location of solvent molecules. It also allowed refinement of the charge states of bound metal atoms, an important element in protein function, through B-factor analysis of the metal atoms and their ligands. These results clearly increase the value of macromolecular electron crystallography as a complementary structural biology technique.

Electron diffraction allows protein structure determination when only nanosized crystals are available. Nevertheless, multiple elastic (or dynamical) scattering, prominent in electron diffraction, is a concern. Current methods for modeling dynamical scattering by multi-slice or Bloch wave approaches are not suitable for protein crystals because they are not designed to cope with large molecules. Here, we limited dynamical scattering of nanocrystals of insulin, thermolysin, and thaumatin by collecting data from thin crystals. To accurately measure the weak diffraction signal from the few unit cells in the thin crystals, we used a low-noise hybrid-pixel Timepix electron counting detector. The remaining dynamical component was further reduced in refinement using a likelihood-based correction, which we introduced previously for analyzing electron diffraction data of small molecule nanocrystals and adapted here for protein crystals. We show that the procedure notably improved the structural refinement, allowing in one case the location of solvent molecules. It also allowed the refinement of the charge state of bound metal atoms, an important element in protein functions, through B-factor analysis of the metal atoms and their ligands. Our results clearly increase the value of macromolecular electron crystallography as a complementary structural biology technique.Competing Interest StatementThe authors have declared no competing interest.View Full Text

Visualizing ligand binding interactions is important for structure-based drug design and fragment-based screening methods. Rapid and uniform soaking with potentially reduced lattice defects make small macromolecular crystals attractive targets for studying drug binding using microcrystal electron diffraction (MicroED). However, so far no drug binding interactions could unambiguously be resolved by electron diffraction alone. Here, we use MicroED to study the binding of a sulfonamide inhibitor to human carbonic anhydrase isoform II (HCA II). We show that MicroED data can efficiently be collected on a conventional transmission electron microscope from thin hydrated microcrystals soaked with the clinical drug acetazolamide (AZM). The data are of high enough quality to unequivocally fit and resolve the bound inhibitor. We anticipate MicroED can play an important role in facilitating in-house fragment screening for drug discovery, complementing existing methods in structural biology such as X-ray and neutron diffraction., Clabbers et al. utilize MicroED to present the structure of both apo and inhibitor-bound human carbonic anhydrase II at a high resolution to clearly identify the interaction of the inhibitor, acetazolamide. This method eases the difficulty of both crystallizing the protein and soaking the inhibitor in a smaller protein crystal.

Adaptations to the DIALS package are described that make it a suitable choice for processing challenging continuous-rotation electron diffraction data. The results of using the extended package are presented for a case consisting of seven example data sets., Electron diffraction is a relatively novel alternative to X-ray crystallography for the structure determination of macromolecules from three-dimensional nanometre-sized crystals. The continuous-rotation method of data collection has been adapted for the electron microscope. However, there are important differences in geometry that must be considered for successful data integration. The wavelength of electrons in a TEM is typically around 40 times shorter than that of X-rays, implying a nearly flat Ewald sphere, and consequently low diffraction angles and a high effective sample-to-detector distance. Nevertheless, the DIALS software package can, with specific adaptations, successfully process continuous-rotation electron diffraction data. Pathologies encountered specifically in electron diffraction make data integration more challenging. Errors can arise from instrumentation, such as beam drift or distorted diffraction patterns from lens imperfections. The diffraction geometry brings additional challenges such as strong correlation between lattice parameters and detector distance. These issues are compounded if calibration is incomplete, leading to uncertainty in experimental geometry, such as the effective detector distance and the rotation rate or direction. Dynamic scattering, absorption, radiation damage and incomplete wedges of data are additional factors that complicate data processing. Here, recent features of DIALS as adapted to electron diffraction processing are shown, including diagnostics for problematic diffraction geometry refinement, refinement of a smoothly varying beam model and corrections for distorted diffraction images. These novel features, combined with the existing tools in DIALS, make data integration and refinement feasible for electron crystallography, even in difficult cases.

Electron crystallography is increasingly becoming a viable alternative for structure elucidation of three-dimensional, multi-nanometre sized crystals of beam-sensitive organics and macromolecules. Because electrons interact with matter strongly, crystals cannot be much more than 200 nm thick. Diffracted volumes are therefore small, leading to a poor signal-to-noise ratio (SNR) as beam damage limits the total electron dose. Data can be collected in diffraction – and imaging mode. Imaging has the advantage of providing spatial phase information but comes at a substantial cost in SNR. Highly sensitive hybrid pixel detectors push the limits of high-quality diffraction data acquisition even further. Data integration, structure solution and refinement are feasible with existing software after minor adaptations. We review the current state of electron diffraction for structural biology, including instrumentation, data acquisition and structure determination.

A single three-dimensional protein nanocrystal was used for structure determination by electron diffraction. Data were acquired using the rotation method with a Timepix hybrid pixel detector for low-dose data acquisition., Three-dimensional nanometre-sized crystals of macromolecules currently resist structure elucidation by single-crystal X-ray crystallography. Here, a single nanocrystal with a diffracting volume of only 0.14 µm3, i.e. no more than 6 × 105 unit cells, provided sufficient information to determine the structure of a rare dimeric polymorph of hen egg-white lysozyme by electron crystallography. This is at least an order of magnitude smaller than was previously possible. The molecular-replacement solution, based on a monomeric polyalanine model, provided sufficient phasing power to show side-chain density, and automated model building was used to reconstruct the side chains. Diffraction data were acquired using the rotation method with parallel beam diffraction on a Titan Krios transmission electron microscope equipped with a novel in-house-designed 1024 × 1024 pixel Timepix hybrid pixel detector for low-dose diffraction data collection. Favourable detector characteristics include the ability to accurately discriminate single high-energy electrons from X-rays and count them, fast readout to finely sample reciprocal space and a high dynamic range. This work, together with other recent milestones, suggests that electron crystallography can provide an attractive alternative in determining biological structures.

Micro-crystal electron diffraction (MicroED) has recently shown potential for structural biology. It enables studying biomolecules from micron-sized 3D crystals that are too small to be studied by conventional X-ray crystallography. However, to the best of our knowledge, MicroED has only been applied to re-determine protein structures that had already been solved previously by X-ray diffraction. Here we present the first unknown protein structure – an R2lox enzyme – solved using MicroED. The structure was phased by molecular replacement using a search model of 35% sequence identity. The resulting electrostatic scattering potential map at 3.0 Å resolution was of sufficient quality to allow accurate model building and refinement. Our results demonstrate that MicroED has the potential to become a widely applicable tool for revealing novel insights into protein structure and function, opening up new opportunities for structural biologists.

We used 3D microcrystal electron diffraction (MicroED) to solve a new protein structure., Microcrystal electron diffraction (MicroED) has recently shown potential for structural biology. It enables the study of biomolecules from micrometer-sized 3D crystals that are too small to be studied by conventional x-ray crystallography. However, to date, MicroED has only been applied to redetermine protein structures that had already been solved previously by x-ray diffraction. Here, we present the first new protein structure—an R2lox enzyme—solved using MicroED. The structure was phased by molecular replacement using a search model of 35% sequence identity. The resulting electrostatic scattering potential map at 3.0-Å resolution was of sufficient quality to allow accurate model building and refinement. The dinuclear metal cofactor could be located in the map and was modeled as a heterodinuclear Mn/Fe center based on previous studies. Our results demonstrate that MicroED has the potential to become a widely applicable tool for revealing novel insights into protein structure and function.

Experimental and computational reduction of dynamical electron scattering allows for visualizing of individual hydrogen atoms., Compared with X-rays, electron diffraction faces a crucial challenge: dynamical electron scattering compromises structure solution and its effects can only be modelled in specific cases. Dynamical scattering can be reduced experimentally by decreasing crystal size but not without a penalty, as it also reduces the overall diffracted intensity. In this article it is shown that nanometre-sized crystals from organic pharmaceuticals allow positional refinement of the hydrogen atoms, even whilst ignoring the effects of dynamical scattering during refinement. To boost the very weak diffraction data, a highly sensitive hybrid pixel detector was employed. A general likelihood-based computational approach was also introduced for further reducing the adverse effects of dynamic scattering, which significantly improved model accuracy, even for protein crystal data at substantially lower resolution.

The molecular geometry and supramolecular packing of two bichromophoric prototypic light harvesting compounds D1A2 and D2A2, consisting of two naphthylimide energy donors that were attached to the 1,7 bay positions of a perylene monoimide diester energy acceptor, have been determined by a hybrid approach using magic angle spinning NMR and electron nano crystallography (ENC), followed by modelling. NMR shift constraints, combined with the P-1 space group obtained from ENC, were used to generate a centrosymmetric dimer of truncated perylene fragments. This racemic packing motif is used in a biased molecular replacement approach to generate a partial 3D electrostatic scattering potential map. Resolving the structure of the bay substituents is guided by the inversion symmetry and the distance constraints obtained from heteronuclear correlation spectra. The antenna molecules form a pseudocrystalline lattice of antiparallel centrosymmetric dimers with pockets of partially disordered bay substituents. The two molecules in a unit cell form a butterfly-type arrangement. The hybrid methodology that we have developed is robust and widely applicable for critical structural underpinning of self-assembling structures of large organic molecules.