Search

In situ missions of exploration require analytical methods that are capable of detecting a wide range of molecular targets in complex matrices without a priori assumptions of sample composition. Furthermore, these methods should also minimize the number of reagents needed and any sample preparation steps. We have developed a method for the detection of metabolically relevant inorganic and organic anions that is suitable for implementation on in situ spaceflight missions. Using 55 mM acetic acid, 50 mM triethylamine, and 5% glycerol, more than 21 relevant anions are separated in less than 20 minutes. The method is robust to sample ionic strength, tolerating high concentrations of background salts (up to 900 mM NaCl and 300 mM MgSO₄). This is an important feature for future missions to ocean worlds. The method was validated using a culture of Escherichia coli and with high salinity natural samples collected from Mono Lake, California.

The in situ search for chemical signatures of life on extraterrestrial worlds requires automated hardware capable of performing detailed compositional analysis during robotic missions of exploration. The use of electrophoretic separations in this search is particularly powerful, enabling analysis of a wide range of soluble organic compounds potentially indicative of life, as well as inorganic compounds that can serve as indicators of habitability. However, to detect this broad range of compounds with a single electrophoresis instrument, a combination of different detection modes is required. For detection of any ionizable species, including organic compounds that do not participate in terrestrial biology (i.e., "unknown unknowns"), mass spectrometry (MS) is essential. Inorganic ions, or any dissolved charged species present, can be analyzed using capacitively coupled contactless conductivity detection (C4D). Additionally, for the trace analysis of compounds of key interest to astrobiology (particularly, amino acids), laser-induced fluorescence (LIF) detection holds unique promise, due to the fact that it has the highest demonstrated sensitivity of any form of detection. Here, we demonstrate a fully automated, portable capillary electrophoresis analyzer that is capable of all these modes of detection. The prototype system developed here addresses the three most significant challenges for doing electrophoretic separations: precise sample injection, HV isolation, and automation of all operational steps. These key challenges were successfully addressed with the use of custom-designed rotor-stator valves with optimized operational sequences incorporating gas purging steps, rinses, and HV application.

Cocaine (COC) is one of the most widely consumed illegal drugs around the world. Street COC is commonly adulterated with pharmaceutical compounds that mimic or intensify the COC's sensory effect. Adulteration is performed to increase the profit of criminal organizations and each one has their own way of doing it. Therefore, determining the composition of seized COC samples (chemical profile) provides evidence for the police to track criminal organization networks and their activity patterns. Using filter paper as a substrate, we developed a multiple detection paper-based analytical device (PAD) that combines colorimetric and electrochemical measurements to discriminate COC samples according to adulterant's content. A regular graphite lead modified with a gold film made from Au leaf (graphite/Au) to improve electron transfer was used as a working electrode. Silver and Ag/AgCl were used as auxiliary and reference electrodes, respectively. The colorimetric device was patterned using a laser cutter and coupled to the electrochemical device using a double-sided tape, allowing simultaneous analysis to gather more analytical information about COC samples. Graphite/Au was characterized by scanning and transmission electron microscopies and electrochemical assays. The simultaneous colorimetric and electrochemical analyses combined to principal component analysis improved the analytical characterization of COC trial samples and provided a fast discrimination based on the assembled database.

Silver ions (Ag+) have been proposed as a biocide to treat the water in NASA's next generation of human space exploration vehicles/habitats. One advantage of Ag+ is that it is effective as a biocide in a range (200 to 500 ppb) safe for human consumption. So, monitoring Ag+ is essential to ensure the safety and health of the crew. Here we present two analytical methods based on capillary electrophoresis and capacitively coupled contactless conductivity detection (CE-C4D) to address the need to monitor Ag+ levels in water. Using 5 M acetic acid as a background electrolyte (BGE), 100 ppb of Ag+ could be detected in a simulant of the International Space Station (ISS) water. In addition to Ag+, other inorganic cations (K+, Ca2+, Na+, Mg2+, Ni2+, and Zn2+) frequently found in the ISS potable water can be detected simultaneously using this BGE in less than 4.5 min. By using a BGE composed of 0.5 M acetic acid, levels of Ag+ as low as 25 ppb could be detected in the ISS water simulant in less than 2.5 min. Although in this condition none of the other cations interfered with the detection of Ag+, some of them co-migrated, which could prevent obtaining additional information about the sample composition.

Screen-printed electrodes (SPEs) coupled with flow systems have been reported in recent decades for an ever-growing number of applications in modern electroanalysis, aiming for portable methodologies. The information acquired through this combination can be attractive for future users with basic knowledge, especially due to the increased measurement throughput, reduction in reagent consumption and minimal waste generation. The trends and possibilities of this set rely on the synergistic behavior that maximizes both SPE and flow analyses characteristics, allowing mass production and automation. This overview addresses an in-depth update about the scope of samples, target analytes, and analytical throughput (injections per hour, limits of detection, linear range, etc.) obtained by coupling injection techniques (FIA, SIA, and BIA) with SPE-based electrochemical detection.

With growing interest in exploring ocean worlds, such as Europa and Enceladus, there is a fundamental need to develop liquid-based analytical techniques capable of handling high salinity samples while performing both bulk and trace species measurements. In this context, CE with capacitively coupled contactless conductivity detection (CE-C4 D) has tremendous potential. One of its advantages is that this combination allows the detection of a wide number of charged species (both organic and inorganic) without the need of derivatization. Amino acids are an example of organic targets that are powerful biosignatures in the search for life beyond Earth. Simultaneous information on the inorganic cations in a sample helps with assessing the habitability of an extraterrestrial environment, as well as providing sample context for any measurements of trace amino acids. In this work, we present a series of flight-compatible methods capable of simultaneously measuring inorganic cations and amino acids in samples of varying salinity by CE-C4 D. Regardless of the sample total salinity, 5.0 M acetic acid was selected as the optimum BGE. The methods were evaluated by analyzing natural samples of low and high salinity from Hot Creek Gorge, Mono Lake, and Santa Monica beach. Prospects for mission implementation are also discussed.

Methods for determination of glycerol and its electrooxidation products (neutral diols and carboxylates) by capillary electrophoresis (CE) with dual capacitively coupled contactless conductivity detectors (C4D) are presented. Glycerol, dihydroxyacetone and glyceraldehyde were detected as anionic borate complexes in less than 3 min under counter Electroosmotic Flow (EOF) mode (resolution of the critical pair of 1.8). Limits of detection (LODs) of 15, 15 and 10 µmol L−1 were obtained for glycerol, dihydroxyacetone and glyceraldehyde, respectively. Two methods of separation were used for the separation of carboxylates. The first one used the same Back Ground Electrolyte (BGE) containing borate, and the second used a BGE (pH 6.1) composed by 2-(N-morpholino)ethanesulfonic acid (MES), L -Histidine and a flow modifier. Better separation and LODs for carboxylates were obtained using Mes/Histidine as BGE. However, along with the non-applicability of this BGE to the determination of neutral diols, observation of the C4D signals at two different points of the capillary (10 and 50 cm apart from the injection tip) revealed interaction of the flow modifier with some species (mesoxalate and glyoxylate). The electrooxidation of a glycerol sample in alkaline media on an 8 cm2 gold working electrode was evaluated by the developed methods. After 16 h of electrolysis, 87% of the glycerol had been oxidized and formate, glycolate, hydroxypyruvate and glycerate were detected as the main products.

Crucial steps of a chemical analysis, such as sampling, determination, and statistical analysis of data, are addressed in a well-tested and stimulating laboratory activity that convincingly unveils the stratification of ingredients in a heterogeneous household product for laundry: a powdered oxygen bleach. Three different samples of bleach were taken from a single jar: one from the top, one from the bottom, and a more representative mixture collected by driving a core sampler (a graduated cylinder was found to be appropriate) throughout the full depth of the jar content. The resulting frequency distribution curves (histograms) of the H2O2 titrations with MnO4– presented widely separated maxima for the three samples, while no statistically significant difference was found for the titration of CO32– with HCl. These results intrigue the students, leading them to reflect until they understand that this is due to the presence of a single compound acting as a source of H2O2 (sodium percarbonate), while two ingr...

1-propanol is a primary alcohol extensively used in the pharmaceutical, chemical, and food industries. It has been also found as a contaminant in the atmosphere and is considered a model compound to mimic the behavior and fate of aliphatic alcohols exposed to environmental conditions. In order to understand that role of relevant variables, this paper presents results obtained with a simple experimental set-up to investigate the reactivity of 1-propanol under mild oxidizing conditions. Coupling this system with CE-C4 D allowed the quantification of the carboxylic acids formed. For the described experiments, aqueous solutions of 1-propanol were placed inside a photoreactor and oxidized upon the addition of TiO2 and/or H2 O2 . According to the described results, the addition of H2 O2 (0.1% w/w) was the most significant variable, roughly tripled the amount of carboxylic acids generated and led to the conversion of up to 70% of the initially available 1-propanol (1 mmol/L). More importantly, the reaction yielded the formation (within 10 min) of propionate (50 µmol/L), acetate (400 µmol/L), formate (50 µmol/L), and malonate (200 µmol/L). The latter is critically important because it represents the first example of the photochemical oxidation of both terminal carbons of the C3 -chain of 1-propanol under mild conditions, and opens new avenues for the production of this important chemical building block.

1-propanol is a primary alcohol extensively used in the pharmaceutical, chemical, and food industries. It has been also found as a contaminant in the atmosphere and is considered a model compound to mimic the behavior and fate of aliphatic alcohols exposed to environmental conditions. In order to understand that role of relevant variables, this paper presents results obtained with a simple experimental set-up to investigate the reactivity of 1-propanol under mild oxidizing conditions. Coupling this system with CE-C

The importance of microorganisms and biotechnology in space exploration and future planets colonization has been discussed in the literature. Meteorites are interesting samples to study microbe-mineral interaction focused on space exploration. The chemolithotropic bacterium Acidithiobacillus ferrooxidans has been used as model to understand the iron and sulfur oxidation. In this work, capillary electrophoresis with capacitively coupled contactless conductivity detection and UV detection was used to monitor bacterial growth in a meteorite simulant by measuring the conversion of Fe2+ into Fe+3 . The effect of Co2+ and Ni2+ (metals also found in meteorites) on the bacterial growth was also evaluated. The presented method allowed the analyses of all metals in a single run (less than 8 min). The background electrolyte was composted of 10 mmol/L α-hydroxyisobutyric acid/Histidine. For comparison purpose, the samples were also analyzed by UV-Vis spectrophotometry. The Fe2+ conversion into Fe3+ by A. ferrooxidans was observed up to 36 h with the growth rate constant of 0.19/h and 0.21/h in Tuovinen and Kelly (T&K) and in meteorite simulant media, respectively. The developed method presents favorable prospect to monitor the growth of other chemolithotropic microorganisms for biotechnology applications.

Topiramate (TPM) is the main antiepileptic drug used for the control of partial and generalized seizures in both adults and children. In association with clinical observations, the analysis of plasmatic concentration of TPM is of utmost importance for the individual adjustment of the administered dose to the patient. In the present work, a bioanalytical method was developed and validated for TPM analysis in plasma samples by capillary electrophoresis with capacitively-coupled contactless conductivity detection (CE-C4 D). A simple background electrolyte composed of 15 mmol/L triethylamine, hydrodynamic injections (0.8 psi for 5 s) and a moderate separation voltage (20 kV) were used, rendering relatively short analysis times (

Recently our group has developed a simple and practical procedure to immobilize glucose oxidase (GOD) on poly(methyl methacrylate) (PMMA) microchannels. In the present study not only was the GOD microreactor preparation optimized but also, more important, it is shown that the functionalization of PMMA microchannels with polyethyleneimine (PEI) is a methodology of wider applicability to anchor enzymes with glutaraldehyde, with a potential for the development of microanalytical devices and systems. As a demonstration, the preparation and evaluation of microreactors with immobilized ascorbate oxidase (AAO), catalase (CAT), glutamate dehydrogenase (GDH) and a dual enzymatic system (GOD and horseradish peroxidase) is reported. Direct (GOD) and indirect (AAO and CAT) chronoamperometric measurements were made in order to evaluate the reactors' activity. GDH immobilization was confirmed photometrically through a thiazolyl blue tetrazolium bromide based reaction while a Trinder's reaction based method was used to evaluate the GOD/HRP microreactor. A small volume flow cell built in the lab was connected to two optical fibers to implement spectrophotometric measurements. After 15 days of use (~ 1000 injections), no change was observed in the efficiency of the CAT reactor (100% destruction of the analyte) while the GOD/HRP reactor that decayed to 25% of the original activity, was still useful despite the decrease in sensitivity.

Gold is among the most used materials in electrocatalysis. Despite this, this noble metal is still too expensive to be used in the fabrication of low cost and disposable devices. In the present work, gold-leaf sheets, usually employed in decorative crafts and wedding candies, is introduced as an inexpensive source of gold. Planar-disc and nanoband gold electrodes were simply and easily manufactured by combining gold leaf and polyimide tape. The planar disc electrode exhibited electrochemical behavior similar to that of a commercial gold electrode in 0.2molL-1 H2SO4; cyclic voltammetry of a 1mmolL-1 solution of potassium ferricyanide (K3[Fe(CN)6]) in 0.2molL-1 KNO3, using this novel electrode, displayed an 80mV difference between the oxidation and reduction peak potentials. The electrode also delivers promising prospects for the development of wearable devices. When submitted to severe mechanical deformation, this electrode exhibited neither loss of electrical contact nor significant variation in electrode response, even after fifteen bending and/or folding cycles. The thickness of the gold-leaf sheet facilitates the production of nanoband electrodes with behavior similar to that of ultramicroelectrodes. The electrode surface is easily renewed by cutting a thin slice off its end with a razor blade; this process led to limiting currents that were reproducible, presenting a relative standard deviation (RSD) of 3.8% (n = 5).

Concurrently with ethanol, many other compounds can be formed during the fermentation of grains and fruits. Among those, methanol is particularly important (because of its toxicity) and is typically formed at concentrations much lower than ethanol, presenting a particular challenge that demands the implementation of separation techniques. Aiming to provide an alternative to traditional chromatographic approaches, a hybrid electrophoresis device with electrochemical preprocessing and contactless conductivity detection (hybrid EC-CE-C4D) is herein described. The device was applied to perform the electro-oxidation of primary alcohols, followed by the separation and detection of the respective carboxylates. According to the presented results, the optimum conditions were obtained when the sample was diluted with 2 mmol L–1 HNO3 and then electro-oxidized by applying a potential of 1.4 V for 60 s. The oxidation products were then electrokinetically injected by applying a potential of 3 kV for 4 s and separated u...

An EC-CE-C4D flow system was applied to the investigation of electrocatalytic processes by monitoring carboxylic acids formed during the electro-oxidation at various potentials of primary alcohols (mixture of 1 mmol L−1 of ethanol, n-propanol, n-butanol and n-pentanol) in acidic, neutral and alkaline media. The electro-oxidation was carried out on gold and platinum disk electrodes (3 mm of diameter) in a thin-layer electrochemical flow cell. Products were sampled 50 μm apart from the electrode directly into the capillary. All the generated carboxylates were determined in near real time (less than 2 min) by CE-C4D in counter-flow mode, with Tris/HCl buffer solution (pH 8.6) as BGE. Long sequences of 5 min experiments were run automatically, exploring the applied potential, electrolysis time and solution composition. Electro-oxidation at 1.5 V (vs. Ag/AgCl quasi-reference) during 50 s in acidic medium was found appropriate for both Pt and Au electrodes when the determination of alcohols after derivatization is intended. A noteworthy selectivity effect was observed on the Au electrode. The signal corresponding to pentanoate is similar on both electrodes while the signal of ethanoate (acetate) is four times larger on gold than on platinum. The carboxylate signals were lower in alkaline medium (below the determination limit on Pt) than in acidic and neutral media. On gold, the formation of carboxylates was anticipated (0.85 V in alkaline medium vs. 1.40 V in neutral medium). The automatic online monitoring of electrochemical processes by EC-CE-C4D holds great potential to investigate ionic/ionizable intermediates/products of new electrocatalysts and/or alternative fuels. This article is protected by copyright. All rights reserved

A combinação de célula eletroquímica (EC) com a entrada do equipamento de eletroforese capilar (CE), apesar de recente, tem permitido realizar determinação de ânions radicais; pré-concentração eletroquímica de metais pesados, seguida de redissolução, separação e detecção; bem como monitorar produtos carregados formados por oxidação eletrocatalítica de espécies neutras, como álcoois primários e glicerol. Empregando o sistema EC-CE-C4D desenvolvido pelo grupo, a determinação simultânea de cátions, ânions (no contra fluxo) e espécies neutras (detectadas após derivatização eletroquímica) foi demonstrada pela primeira vez, tendo o antisséptico bucal (Listerine® Tartar Control) como amostra real. Embora constante e reprodutível, a conversão dos álcoois primários nos respectivos carboxilatos apresentou rendimento relativamente baixo, ~16%, nas condições anteriormente adotadas, 1,6 V vs. Ag/AgClKCl 3M empregando eletrodo de platina em meio ácido (HNO3 5 mmol L-1 / HCl 1 mmol L-1). Dessa maneira, avaliou-se a oxidação de álcoois primários de cadeia normal (C2 − C5) sobre diferentes materiais de eletrodo (ouro e platina) em diferentes meios (ácido, neutro e alcalino). Os carboxilatos gerados foram monitorados injetando uma alíquota da amostra derivatizada no capilar (50 µm d.i., 45 cm de comprimento e 20 cm efetivo) aplicando 5 kPa durante 5 s, e durante as separações, 30 kV foi aplicado entre as extremidades do capilar preenchido com Tris 30 mmol L-1 / HCl 10 mmol L-1 usado como BGE. Os resultados obtidos com o sistema EC-CE-C4D apontaram maior conversão dos álcoois nos respectivos ácidos carboxílicos em meio ácido, tanto em ouro quanto em platina. Adicionalmente, em eletrodo de ouro a formação dos carboxilatos apresentou certa seletividade não observada sobre platina, favorecendo a conversão dos álcoois de cadeia menor. Noutra vertente, buscando atender as necessidades atuais por metodologias que possibilitem monitorar a eletrooxidação do glicerol em reatores eletroquímicos, desenvolveu-se um método que permitiu determinar simultaneamente o glicerol e alguns de seus possíveis produtos de oxidação neutros, como gliceraldeído e dihidroxiacetona, explorando a formação de complexo carregado com borato (presente no BGE composto por H3BO3 60 mmol L-1 / LiOH 30 mmol L-1), além dos produtos ionizáveis (ácidos carboxílicos) que são comumente analisados por CE. O equipamento de CE utilizado, munido de dois detectores C4D, também permitiu avaliar a interação de alguns ácidos carboxílicos com os modificadores de EOF, Polybrene® e CTAB, empregando MES 30 mmol L-1 / His 30 mmol L-1 como BGE. Seguindo a atual tendência à miniaturização de sistemas analíticos, avaliou-se a possibilidade de construir um sistema EC-CE-C4D miniaturizado. Para isso, um novo método para fabricação de microdispositivos em vidro, baseado em ablação a laser de CO2 assistida por parafina, como alternativa aos dispendiosos métodos de corrosão por via úmida foi desenvolvido. Os dispositivos obtidos por esse método apresentaram canais de perfil semicircular, e as dimensões puderam ser controladas variando a potência e/ou a velocidade de ablação do laser. Contudo, pelos desafios ainda encontrados para se construir um sistema EC-CE-C4D completo em substrato de vidro por ablação a laser de CO2, optou-se por iniciar a miniaturização do sistema EC-CE-C4D com um sistema híbrido em que se aproveita as características mais bem definidas e favoráveis dos tubos capilares de sílica fundida usados em CE convencional. Esse sistema permitiu a determinação quantitativa de metanol na presença de alta concentração de etanol, possibilitando, numa primeira aplicação, realizar o monitoramento da quantidade de metanol e etanol nas frações iniciais coletada durante o processo de destilação fracionada na produção de uísque de milho (moonshine) feito em laboratório. Visto a maior seletividade para conversão dos álcoois de cadeia menor obtidas em eletrodo de ouro e meio ácido, esse foi escolhido para a presente aplicação. As condições que apresentaram melhores resultados no sistema híbrido EC-CE-C4D abrangeram diluição de 100 vezes da amostra em HNO3 2 mmol L-1, eletrooxidação a 1,4 V vs. Ag durante 60 s, injeção eletrocinética no capilar mediante aplicação de 3 kV durante 4 s, e a separação dos carboxilatos realizada aplicando 3 kV entre as extremidades do capilar (50 µm d.i., 15 cm de comprimento com 12 cm efetivo), preenchido com CHES 10 mmol L-1 / NaOH 5 mmol L-1, usado como BGE. A análise das primeiras frações destiladas da \"labmade moonshine\" apresentou um aumento na concentração de etanol (variando de ~80 % a ~100 %) e simultâneo decréscimo da concentração de metanol (variando de 4 % a ~0,1 %). Em suma, avançou-se tanto no leque de aplicações da derivatização eletroquímica hifenizada com a eletroforese capilar como na miniaturização da instrumentação analítica para EC-CE-C4D, favorecendo a disseminação dessa poderosa combinação de três técnicas eletroquímicas. The direct couple of electrochemical cell (EC) with the inlet of the capillary electrophoresis (CE) equipment, recently demonstrated, has allowed the determination of radical anions; to perform electrochemical preconcentration of traces of heavy metals, followed by stripping, injection, separation and detection; and the generation of charged species by electrochemical oxidation of neutral molecules, e.g. primary alcohols and glycerol. Employing the EC-CE-C4D system developed by our group, the simultaneous determination of cations, anions (in the counter EOF mode) and neutral species (after electrochemical derivatization) was demonstrated for the first time and a mouthwash (Listerine® Tartar Control) was used as a real sample. Although constant and reproducible, the conversion of primary alcohols into carboxylates had a low yield (~16%), under the adopted conditions, 1.6 V vs. Ag/AgClKCl 3M using platinum electrode in acid medium (5 mmol L-1 HNO3 / 1 mmol L-1 HCl). Thus, the yield of carboxylates was studied for the oxidation of alcohols (C2 − C5) on two electrode materials (gold and platinum) in different media (acid, neutral and alkaline). After the electrooxidation step an aliquot of the derivatized sample was automatically injected into the capillary (50 µm i.d., 45 cm in length and 20 cm up to detector) by applying 5 kPa during 5 s. The separation was carried out applying 30 kV between the capillary ends previously filled with 30 mmol L-1 Tris / 10 mmol L-1 HCl BGE. Cyclic voltammograms show higher current density for alcohols oxidation in alkaline medium than in acid one both on gold and platinum electrodes. On the other hand the yields of carboxylic acids were higher in acidic medium. Besides that, only on gold electrode some selectivity for the carboxylate formation was observed favoring the conversion of the short chain alcohols. In order to meet the current needs for methodologies that allow the monitoring of the electrooxidation of glycerol in electrochemical reactors, a method was also developed that allowed the determination of glycerol and some of its possible neutral oxidation products, such as glyceraldehyde and dihydroxyacetone, by exploring the formation of borate complexes (provided in the BGE composed of 60 mmol L-1 H3BO3 / 30 mmol L-1 LiOH), together with ionizable ones like carboxylic acids. The employed CE equipment with two C4D detectors allowed the evaluation of the interaction between some carboxylic acids and the EOF modifiers, Polybrene® and CTAB, using 30 mmol L-1 MES / 30 mmol L-1 His as BGE. Aligned with a current trend of analytical instrumentation, the miniaturized EC-CE-C4D system was attempted. For that, a new method for manufacturing microdevices in glass, based on paraffin-assisted CO2 laser ablation, was developed as an alternative to costly wet-etching methods. The devices obtained by this method presented channels of semicircular profile and the dimensions could be controlled by varying the laser power and/or ablation velocity. Due to remaining challenges in the construction of a complete laser ablated EC-CE-C4D system on glass, a miniaturized system based on a hybrid approach is presented in the thesis, by taking advantage of the more defined and favorable characteristics of the well known fused silica capillary tubes used in CE. This system allowed the quantitative determination of methanol in the presence of high ethanol concentration by taking advantage of the higher yield of short-chain carboxylic acid formation on gold in acidic medium. The first application was the monitoring of the amount of methanol and ethanol in the initial fractions collected during the fractional distillation process in the production of corn whiskey (moonshine) made in the laboratory. The conditions that showed the best results with the hybrid EC-CE-C4D system included a 100-fold dilution of the sample in 2 mmol L-1 HNO3, electrooxidation at 1.4 V vs. Ag for 60 s, electrokinetic injection into the capillary by applying 3 kV for 4 s and separation of the carboxylates carried out under 3 kV between the ends of the capillary (50 µm i.d., 15 cm in length and 12 cm up to detector) previously filled with 10 mmol L-1 CHES / 5 mmol L-1 NaOH, used as BGE. Analysis of the first distilled fractions of labmade moonshine showed an increase in ethanol concentration (ranging from ~ 80% to ~ 100%) and a simultaneous decrease in methanol concentration (ranging from 4% to ~ 0.1%). In short, both the range of applications of electrochemical derivatization hyphenated with capillary electrophoresis as well the miniaturization of analytical instrumentation for EC-CE-C4D were improved, favoring the dissemination of this powerful combination of three electrochemical techniques.

The search for life in our Solar System is one of the highest priorities at NASA. Because of the presence of liquid water in the Oceans Worlds such as Jupiter's moon Europa, and Saturn's moon Enceladus, these bodies could potentially harbor life and be the focus of future missions. Liquid-based analytical techniques are particularly attractive for in situ analyses on these locations, since the sample could be analyzed in its natural state (e.g., liquid water or melted ice). Capillary electrophoresis (CE) is a powerful liquid separation technique that has tremendous promise for in situ studies on Ocean Worlds. By using contactless conductivity detection (C4D) a wide number of charged species (both organic and inorganic) can be detected without the need of derivatization. This includes amino acids, which are powerful biosignatures in the search for life beyond Earth as well as inorganic salts that are of primary importance to biological activity and they also determine the thermo-physical properties of any liquid mixture. The characterization of the distribution of inorganic ions is essential to assess the habitability of an extraterrestrial environment and provide sample context for trace detection of amino acids. We are currently developing CE-C4D methods that would be suitable for flight implementation. The first method allows the simultaneous analysis of inorganic cations and amino acids relevant to astrobiology [1]. A second method for analysis of inorganic anions and organic acids is also being developed. The main goal is to use both methods with a single capillary in order to obtain detailed chemical composition of the sample with the simplest configuration possible. Standard mixtures including some of the most relevant analytes for planetary studies were selected and electropherograms for the separations of the positively and negatively charged analytes are presented in the Figure 1A and B, respectively. To demonstrate the potential applications of these methods we have analyzed relevant natural samples of varying salinity. Acknowledgments The research described in this abstract was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration. Financial support for this project was provided by The Planetary Instrument Concepts for the Advancement of Solar System Observations (PICASSO) Program. References [1] Ferreira Santos, M. S. et al., Electrophoresis 2018, 22, 2890-2897. Figure 1

The simultaneous determination of cationic, anionic, and neutral analytes in a real sample was demonstrated by coupling electrochemical (EC) derivatization with counter-EOF CE-C(4) D. An EC flow cell was used to oxidize alcohols from an antiseptic mouthwash sample into carboxylic acids at a platinum electrode in acid medium. The carboxylates formed in the derivatization process and other sample ingredients, such as benzoate, saccharinate, and sodium ions, were separated in counter-flow mode and detected in one run in Tris-HCl buffer, pH 8.6. Fewer than 5 min were needed to complete each analysis with the automated flow system comprising solenoid pumps for the management of solutions. Insights into the electrochemistry of benzoic acid, present in the sample matrix, were also gained by EC-CE-C(4) D; more specifically, by applying potentials higher than 1.47 V to the platinum electrode, some formiate and minute amounts of salicylate were detected.

A closer look at particles of a solid oxygen-based bleach household product is proposed, both figuratively and literally, to help develop observation and critical thinking skills and to link everyday life to chemistry concepts like acid–base equilibrium, redox reactivity, gas laws, gas volumetry, stoichiometry, and morphology of a heterogeneous solid mixture. In a microchemical approach, students learn to discriminate particles by their morphology under an optical (or low-cost USB) microscope and to investigate how they react with (a) hypochlorite solution (or household chlorine bleach); and (b) acetic acid (or vinegar). Aware of the ingredients listed on the product’s label, and searching for the structure and formula of percarbonate (2Na2CO3·3H2O2), a hydrogen peroxide–sodium carbonate adduct, they end up concluding that the particles showing effervescence with both reagents consist of sodium percarbonate, and those bubbling only in contact with acetic acid are sodium carbonate, while other minor ingred...

A thin-layer electrochemical flow cell coupled to capillary electrophoresis with contactless conductivity detection (EC-CE-C(4)D) was applied for the first time to the derivatization and quantification of neutral species using aliphatic alcohols as model compounds. The simultaneous electrooxidation of four alcohols (ethanol, 1-propanol, 1-butanol, and 1-pentanol) to the corresponding carboxylates was carried out on a platinum working electrode in acid medium. The derivatization step required 1 min at 1.6 V vs. Ag/AgCl under stopped flow conditions, which was preceded by a 10 s activation at 0 V. The solution close to the electrode surface was then hydrodynamically injected into the capillary, and a 2.5 min electrophoretic separation was carried out. The fully automated flow system operated at a frequency of 12 analyses per hour. Simultaneous determination of the four alcohols presented detection limits of about 5 × 10(-5) mol L(-1). As a practical application with a complex matrix, ethanol concentrations were determined in diluted pale lager beer and in nonalcoholic beer. No statistically significant difference was observed between the EC-CE-C(4)D and gas chromatography with flame ionization detection (GC-FID) results for these samples. The derivatization efficiency remained constant over several hours of continuous operation with lager beer samples (n = 40).

A eletroforese capilar (CE) é uma técnica poderosa de separação que explora as diferenças na mobilidade de espécies iônicas sob efeito do campo elétrico. Não permite, contudo, separação de misturas de moléculas neutras, possível mediante formação de complexos com carga, derivatização química ou cromatografia eletrocinética micelar (MEKC). A derivatização eletroquímica tem sido usada em combinação com HPLC, entre outras técnicas, mas não ainda com CE e para fins quantitativos, como proposto e demonstrado nesta dissertação, em que se enfoca, como sistemas modelo, álcoois primários de cadeia curta e se recorre a sistema em fluxo designado de EC-CE-C4D, que consiste de uma célula eletroquímica acoplada com equipamento de eletroforese capilar provido de detector de condutividade sem contato direto com os eletrodos. O sistema EC-CE-C4D, inicialmente concebido para efetuar pré-concentração e redissolução eletroquímica de metais seguida de separação eletroforética, possibilitou também o monitoramento de produtos com carga, formados em processos eletrocatalíticos, fato que inspirou a investigação da aplicabilidade, também do sistema à derivatização eletroquímica de analitos neutros em iônicos ou ionizáveis. Inicialmente, a oxidação de etanol foi avaliada por voltametria cíclica em eletrodos de ouro, paládio e platina policristalinos, nos meios ácido, neutro e alcalino. Maior formação de ácido acético se deu sobre platina em meio ácido (pH = 2,3). Entre os tampões avaliados por simulação (PeakMaster 5.1) para a separação dos carboxilatos, o TRIS/HCl (pH = 8,6) foi favorável em termos de resolução, rapidez e sensibilidade. Após a eletrooxidação da amostra sobre Pt a 1,6 V vs. Ag/AgCl por 60 s seguida de transferência de nanolitros dos produtos formados para o capilar por injeção hidrodinâmica, o meio ácido é trocado pelo tampão de corrida com auxílio de microbombas controladas por computador. A eficiência da conversão eletroquímica dos álcoois em carboxilatos, de 16% para etanol e propanol nas condições adotadas, apesar de não muito eficiente, proporcionou boa repetibilidade e limites de quantificação ao redor de 5 10-5 mol L-1 para etanol, 1-propanol, 1-butanol e 1-pentanol, ou seja, cerca de 20 vezes melhores que os reportados para MEKC. As curvas analíticas para os 4 álcoois apresentaram boa linearidade (R > 0,996) e a boa separação entre os picos permitindo determinações quantitativas simultâneas. Como exemplo de aplicação a amostras reais, demonstrou-se a determinação quantitativa de etanol em cerveja Pilsen convencional (teor alcoólico 4,5% vol.) e sem álcool (teor alcoólico 0.996) and the separation between peaks allowed simultaneous quantitative determinations. As an example of application to real samples, the quantitative determination of ethanol in Pilsen conventional beer (alcohol content 4.5% vol.) and non-alcoholic beer (alcohol content

The structure of polytetraruthenated nickel porphyrin was unveiled for the first time by electrochemistry, Raman spectroelectrochemistry, and a hydroxyl radical trapping assay. The electrocatalytic active material, precipitated on the electrode surface after successive cycling of [NiTPyP{Ru(bipy)2Cl}4](4+) species in strong aqueous alkaline solution (pH 13), was found to be a peroxo-bridged coordination polymer. The electropolymerization process involves hydroxyl radicals (as confirmed by the characteristic set of DMPO/(•)OH adduct EPR peaks) as reaction intermediates, electrocatalytically generated in the 0.80-1.10 V range, that induce the formation of Ni-O-O-Ni coordination polymers, as evidenced by Raman spectroelectrochemistry and molecular modeling studies. The film growth is halted above 1.10 V due to the formation of oxygen gas bubbles.