Search

The environment can modify the physiology and body protective function of the skin. Propolis (PRP) and curcumin (CUR) possess important antioxidant and antimicrobial properties, and they can be administered in a combined way and using photodynamic therapy (PDT). Emulgels can control drug release due to the physicochemical properties of the gel and the emulsion. They constitute a good strategy for achieving an improved platform for the combined delivery of PRP and CUR. There are no other studies of emulgels composed of PRP and CUR and their performance as antimicrobial and skin healing using or not PDT. This study aimed to investigate the effect of Carbopol 934 P (C934P), 974 P (C974P) or polycarbophil (PC) on physicochemical stability, antioxidant activity, drug release profile, antimicrobial activity, and ex vivo skin permeation and retention of emulgels containing PRP and CUR. Formulations containing C974P or PC displayed improved stability and antioxidant activity. They displayed activity against Staphylococcus aureus and modified (extended) drug release, governed mainly by non-Fickian anomalous transport. C974P and PC resulted in improved emulgels for combined CUR and PRP delivery, allowing the drugs to cross the stratum corneum, and permeate the epidermis, reaching the dermis. The selected emulgels are candidates for further studies to prove their action and benefits to skin health.

This study aims to evaluate the opalescence (OP) and color stability of composite resins over a period of 180 days and to compare composite resins’ OP with enamel’s OP. Twenty human enamel specimens (5.0 × 0.3 mm) and 9 specimens (10.0 × 1.0 mm) of 10 colors of 4 different composite resins (3 M ESPE, FGM, Ivoclar-Vivadent, Miscerium) and one brand of adhesive (3 M ESPE) were made. The results were obtained by measuring the reflectance and transmittance spectra in the visible region. After baseline measurement, composites and adhesive were analyzed after 2, 7, 30, 60, 120, and 180 days. The Lab color coordinates were used in the calculations of the OP parameter and color differences in the CIELab and CIEDE2000 methods. The data were analyzed statistically. The materials tested showed variation and an increase in OP over time. The OP found for enamel was 18.06 ± 2.99, and some resins showed higher results. There was a strong correlation between the coordinate b*T and the OP over time. Enamel Plus was the only one material that presented no color changes during all periods in both color analyses. Filtek Z350 XT, AT, and BT did not show differences in any time when analyzed by CIELAB. The OP of most composite resins changed during the period of 180 days and was different from the OP of tooth enamel. In general, composites demonstrated small color changes over the period tested, being this characteristic material dependent. Natural teeth present different optical properties. Composite resins restorations should present properties similar to natural teeth and it is important that characteristics like color and opalescence remain stable over time.

This paper reports on the synthesis and characterization of original sodium calcium silicate glass, with CaF2 as a nucleating agent, along with the successful transformation of the as-made matrix into glass-ceramic. Characteristic temperatures of thermal events were investigated by Differential Thermal Analysis. Volumetric density, refractive index, molar volume, and electronic polarizability of the newly developed glasses were determined and discussed as a function of Ca(O/F2) and Na2O content, fixing glass former SiO2 at 50 mol%. Transmittance and optical band gap energy were evaluated. Network structure was studied through Raman spectroscopy and X-Ray diffraction. Moreover, Eu3+ was used as a local structural probe in equivalent Eu2O3-doped samples. Luminescence properties (emission spectra and transition lifetimes) allowed us to investigate the local environment of precursor glass and glass-ceramic. Calcium fluoride nanostructured glass-ceramic, with 20 nm-sized crystals, was obtained with significant transparency (60–70% in VIS region). The refractive index of synthesized glasses was too close to that of precepted crystals, which is the requisite for high transmittance. The decay time of Eu3+ ions embedded into the matrix has shown that the glass-ceramics environment's phonon energy is lower than in as-made glass, making this matrix an excellent candidate for photonics applications.

Fungal biofilms have been involved in the pathogenesis of onychomycosis, but the aspects contributing to this association need to be enlightened. This study aimed to investigate the ability of three different fungi to form biofilm on the nail. All evaluated fungi were able to grow on the nails, using them as the only nutritional source and formed a structure strongly suggestive of biofilms. However, their architecture and morphology were highly contrasting: Candida albicans showed dense growth, exhibited a well-structured community and a large amount of extracellular matrix (ECM), and FTIR-ATR spectroscopy reinforced these findings revealing components suggestive of the biofilm. For Fusarium oxysporum, these events were also observed, but in lower intensity. Furthermore, while Trichophyton rubrum presented a well-organized architecture, the ECM was not visualized. We hypothesize that these findings are related to the symptomatology of onychomycosis. When it is caused by a non-dermatophyte, it usually is accompanied with paronychia, pain, oedema, inflammation and few signals of keratolysis, while dermatophytes are more associated with intense onycholysis and absence of the inflammatory signals. Biofilm seems to be crucial for non-dermatophytes to cause onychomycosis, but not for T. rubrum.

We report the recent progress on diode-pumped high-power continuous-wave Pr:LiYF4 (YLF) green laser and deep ultraviolet (DUV) laser generation via intracavity frequency doubling. Using two InGaN blue diode lasers as pump source to form a double-end pumping geometry, in this work, we have demonstrated a green laser at 522 nm with a maximum output power of 3.42 W, which is believed to be the highest power ever achieved in all-solid-state Pr3+ lasers in this specific spectral region. Moreover, by intracavity frequency doubling of the achieved green laser, we have further obtained a DUV laser at about 261 nm with a maximum output power of 1.42 W, which is far higher than previous results. The watt-level 261-nm laser paves the way towards the realization of simple and compact DUV source for a variety of applications.

Objective To evaluate the early stages of the setting process of chemically activated restorative glass-ionomer cements (GICs). Material and methods Five GICs were evaluated (n = 5): Equia Forte (GC), Equia Forte HT (GC), Ketac Universal (3M ESPE), Maxxion R (FGM) and Riva Self Cure (SDI) by Thermography, Fourier Transform Infrared Attenuated Total Reflectance Spectroscopy (FTIR-ATR) and Gillmore needle indentation mechanical testing. The FTIR-ATR spectra showed the formation of metal carboxylates within the cements and enabled the stabilization time (ST) to be determined and the thermographic camera measured the temperature field images in the sample. Data were statistically analyzed by ANOVA and Tukey–Kramer (α = 5%). Results The Gillmore needle test showed that the order of hardening was opposite to the order of ST values determined by FTIR. The results with the thermographic camera showed two stages of temperature variation, which coincided with the evolution of specific infrared bands. The exception was Maxxion R, which showed only a single step change in temperature. Conclusion The early stages of the GIC setting reaction show temperature changes, both endothermic and exothermic, at specific times, confirming the occurrence of individual chemical reactions. The early setting involves reactions other than carboxylate formation. Significance: This study gives further detail of the early stages of the setting of GICs, and past research regarding the setting reaction of GIC.

Thermosensitive bioadhesive formulations can display increased retention time, skin permeation, and improve the topical therapy of many drugs. Acne is an inflammatory process triggered by several factors like the proliferation of the bacteria Propionibacterium acnes. Aiming for a new alternative treatment with a natural source, propolis displays great potential due to its antibiotic, anti-inflammatory, and healing properties. This study describes the development of bioadhesive thermoresponsive platform with cellulose derivatives and poloxamer 407 for propolis skin delivery. Propolis ethanolic extract (PES) was added to the formulations with sodium carboxymethylcellulose (CMC) or hydroxypropyl methylcellulose (HPMC) and poloxamer 407 (Polox). The formulations were characterized as rheology, bioadhesion, and mechanical analysis. The selected formulations were investigated as in vitro propolis release, cytotoxicity, ex vivo skin permeation by Fourier Transform Infrared Photoacoustic Spectroscopy, and the activity against P. acnes. Formulations showed suitable sol-gel transition temperature, shear-thinning behavior, and texture profile. CMC presence decreased the cohesiveness and adhesiveness of formulations. Polox/HPMC/PES system displayed less cytotoxicity, modified propolis release governed by anomalous transport, skin permeation, and activity against P. acnes. These results indicate important advantages in the topical treatment of acne and suggest a potential formulation for clinical evaluation.

The aim of this work was to evaluate the effects of sintering temperature over the structural, physical and mechanical properties in addition to the in vivo biological performance of nanostructured biocomposites obtained from the mixture between calcined fish bone (hydroxyapatite + β-tricalcium phosphate) and niobium pentoxide. The sintering temperatures varied from 650 to 1150°C, in steps of approximately 50°C. The results showed the formation of a stable triphasic nanostructured bioceramic with almost constant relative proportions between the CaNb2O6, PNb9O25 and Ca3(PO4)2 phases. Special attention was given to the sintering temperature at 1080°C because there was occurrence of a liquid phase, and the sample showed localised maximisations of linear shrinkage, density and Vickers hardness. This niobium-biphasic calcium phosphate 1080 (Nb-BCP-1080) nanostructured biocomposite presented measured values for compressive strength (242 ± 29 MPa), Young's modulus (19.63 ± 3.5 GPa), Poisson's ratio (0.248 ± 0.016) and flexural strength (24 ± 5.9 GPa) close to those of some human bones. Then, to further explore these characteristics, in vivo studies were performed by implanting 8.0-mm diameter discs of this material in calvaria of rats. Histological observation showed the occurrence of osseointegration between the neo-formed bone and the triphasic bioceramic just 45 days after implantation. In conclusion, the observations of this work unambiguously show that CaNb2O6–PNb9O25–Ca3(PO4)2 triphasic bioceramics are candidates for bone replacements where high and medium loads are demanded.

The search for gold-standard materials for bone regeneration is still a challenge in reconstruction surgery. The ratio between hydroxyapatite (HAp) and β-tricalcium phosphate (β-TCP) in biphasic calcium phosphate ceramics (BCPs) is one of the most important factors in osteoinduction promotion and controlled biodegradability, configurating what is currently considered as a possible gold standard material for bone substitution in reconstructive surgery. Exploring the natural genesis of the HAp and β-TCP phases in fishbones during their postnatal growth, this study developed a biphasic bioceramic obtained from the calcination of Nile tilapia (Oreochromis niloticus) bones as a function of their ages. The natural genesis dynamics of the structural evolution of the β-TCP and HAp phases were characterized by physicochemical methods, taking into account of the age of the fish and the material processing conditions. Thermal analysis (TGA / DTA) showed complete removal of the organic matter and transitions associated with the transformation of carbonated hydroxyapatite (CDHA) to HAp and β-TCP phases. After calcination at 900 °C, the material was characterized by: X-ray diffraction (XRD) and refinement by the Rietveld method; Fourier Transform Infrared Spectroscopy with Attenuated Total Reflection (FTIR-ATR); Raman spectroscopy; Scanning Electron Microscopy (SEM) and Flame Atomic Absorption Spectroscopy (FAAS). The analysis allowed identification and quantitative estimate of the variations of the HAp and β-TCP phases in the formation of the BCPs. The results showed that the decrease in β-TCP against the increase in the HAp phases is symmetrical to the dynamics of the natural genesis of these phases, surprisingly maintaining the balanced phase proportion even when bones of young fishes were used. The microstructure analysis confirms the observed transformation. In addition, in vivo tests demonstrated the osteoinductive potential of BCP scaffolds implanted in an ectopic site, and their remarkable regenerative functionality, as bone graft, was demonstrated in alveolar bone after tooth extraction. MTT cytotoxicity assay for BCP samples for MC3T3-E1 pre-osteoblasts and L929 fibroblasts cells showed viability equal or higher than 100%. A logistic empirical model is presented to explain the three stages of HAp natural formation with fish age and it is also compared to the fish size evolution.

Background: Fusarium spp. has been considered as an onychomycosis agent, but little is known about the etiopathogenesis of fusarial onychomycosis; thus, the objective of this study was to characterize the fungal-nail interaction and the consequences of the nail infection process by Fusarium oxysporum using the human nail, in an exvivo model. Methods: The kinetic of biofilm production and infection by F. oxysporum using the nail as the only nutritional source were evaluated by scanning electron microscopy, number of culturable cells, metabolic activity, characterization of extracellular matrix, spectroscopy and histopathology analyses. Results: After evaluating the biofilm kinetic over 7 days using different parameters and techniques, it was possible to characterize the Fusarium-nail interaction. Conclusions: This study is a part of a big project aiming to clarify the fusarial pathogenesis and contributes to proving F. oxysporum is able to adapt, grow, develop, and form a biofilm on healthy human nails, which are crucial steps for the invasion process., This study was financed in part by the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brasil (CAPES) - Finance Code 001, Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq), Fundacao de Amparo a Pesquisa do Estado do Parana (Fundacao Araucaria) and Financiadora de Estudos e Projetos (FINEP/COMCAP)., info:eu-repo/semantics/publishedVersion

In this work, the application of photoacoustic and photothermal methods for the evaluation of physicochemical properties of biological systems will be presented as well as the state of art of these methods fostering clinical diagnostics.

In this report, Pr3+-doped calcium aluminosilicate (CAS) glasses were synthesized and their spectroscopic properties investigated. The present subject was motivated by the red emission of the Pr3+ ion that can be combined with the green-yellow emission of other luminescent ions like Ce3+ or Eu2+ for white light generation. This combination of materials has been required since commercial diode devices for white lighting exhibit low color rendering index (CRI) and high correlated color temperature (CCT) due to their low emission intensity in the red region. The results showed that when Pr3+-doped CAS glasses are excited at 445 nm, red and green broadband emissions (FWHM ∼ 1300 and 1800 cm−1, respectively) with a strong dependence on the ion concentration can be observed. The (x, y) coordinates in the CIE-1931 chromaticity diagram changed from (0.61, 0.36) to (0.47, 0.41) when the Pr3+ concentration varied from 0.2 to 2.0 wt.%, what was explained in terms of cross-relaxation mechanisms between Pr3+ ions. The luminescence quantum yield (QY), in the visible range from 450 to 800 nm, of the Pr3+-doped CAS glass was determined by an integrating sphere as 0.37, which is a relatively high value for Pr3+-doped glasses. At high Pr3+ concentrations, the studied system is appropriate to be combined with other green-yellow phosphor material for white light generation.

Emulsion systems have been a breakthrough in cosmetic products, providing performance and effectiveness of products that use this technological strategy for drug delivery systems. In this sense, the microemulsion of the multiple emulsion W/O/W type containing a standardized extract of Trichilia catigua with high levels of polyphenols and antioxidants has great potential for cosmetic use. The aim of this study was to evaluate the formulations safety through the analysis of toxicity, comedogenicity, and histopathology in rabbits and apply the Phase-Resolved Photoacoustic Spectroscopy method to determine the formulation percutaneous penetration through the skin. The ex vivo experiments were performed in the ears of albino New Zealand rabbits treated twice a day for 14 days. The results of histological, hematological, and blood chemistry showed that the formulations are safe. Histopathological analysis showed no tissue reaction in any of the analyzed organs (liver and kidneys), confirming the absence of toxicity. Histological analysis showed that the formulations with extract of T. catigua demonstrated mild-moderately comedogenic and acanthosis compared to the control group. Inflammatory reactions, erythema, and desquamation were not observed in treated and controls animals. The phase-resolved photoacoustic spectroscopy method showed the penetration of the developed formulations throughout the rabbit's skin, identifying their absorption bands at the dermal side of the skin. In conclusion, the results of this study provide a step towards the application of the developed natural antioxidant encapsulated in a multiple microemulsion for skincare, concerned with the physical, chemical, and biological properties of the formulation.

Chloroaluminum phthalocyanine (ClAlPc) is considered to be an important photosensitizer compound, and it has been extensively explored in photodynamic therapy (PDT) against several types of cancer cell lines. However, ClAlPc is known to be a highly hydrophobic compound. Thus, it requires physical association with a drug delivery system for clinical use. In this study, distinct formulations of PS70.5-b-PAA13 diblock copolymer nanostructures containing ClAlPc were studied. Results found in this study showed that the ClAlPc/PS70.5-b-PAA13 diblock composite presented micellar morphology and a size of 200 nm while dispersed in aqueous media. Additionally, zeta potential studies revealed that such formulations presented colloidal stability with low polydispersity index (PDI) values (0.121). The encapsulation efficiency of ClAlPc by such copolymer micelles, made through spectroscopic measures, was higher than 95% while at the phthalocyanine concentration range from 9.0 to 70 μmol L−1. Spectroscopic studies also showed that the existence of monomeric ClAlPc in such nanostructured micelles is closely dependent on the PS concentration. Low PS concentration resulted in monomeric ClAlPc, as observed from the correspondent absorption and emission spectra of freshly-prepared composite. However, even after 15 days of storage and at low PS concentration, the ClAlPc can self-aggregate within the polymer-micellar nanoenvironment (as observed through spectroscopic studies). Photophysical properties of ClAlPc incorporated in the PS-b-PAA copolymer system revealed promising values of oxygen singlet generation (ΦΔ1O2 = 0.3). Skin permeation studies performed by photoacoustic spectroscopy showed that the ClAlPc/PS-b-PAA nanosystem permeates and reaches the superficial dermis layer. In vitro tests, using Caco-2 cell-lines incubated with ClAlPc/PS-b-PAA formulations at different phthalocyanine concentrations, showed cellular damage after 30 min under light radiation (663 nm with LED, fluence of 1.62 μJ cm−2). The IC50 obtained for the system containing ClAlPc/PS-b-PAA was 1.74 · 10−7 mol L−1. Furthermore, no cytotoxicity effect was observed during cell growth tests performed using both ClAlPc/PS-b-PAA composite and pristine PS-b-PAA nanomicelles in the absence of light irradiation. These findings suggested that the PS-b-PAA diblock copolymer produced a promising nanostructured system suitable for the incorporation of the hydrophobic ClAlPc photosensitizer and for subsequent use in the PDT field.

Thermal lens and Z-scan have been the two most important and used techniques for determining third-order nonlinear optical properties and photothermal properties of optical materials. Both methods have response to thermal and electronic effects, depending on the magnitude of each effect and the experimental arrangement, one method becomes more suitable than the other in order to determine the desired property. In this paper the thermal lens effect is analyzed on time-resolved Z-scan measurements in the cw-single beam configuration. A ruby sample, which presents predominantly electronic effect, is compared to samples presenting predominant thermal effects. The theoretical and a complete experimental description are presented. The difference between both thermal and electronic effects on Z-scan method is assessed and quantified.

In this study, luminescence properties of Tb3+-doped low silica calcium aluminosilicate glasses are analyzed as a function of Tb3+ concentration (0.04–15.0 wt%). Decay curves for the 5D3 level are found to be non-exponential for all Tb3+ concentrations due to ion–ion energy transfer through cross-relaxation process. To identify the origin of the energy transfer mechanism, the decay curves were well fitted by Inokuti–Hirayama model (s = 6), which indicates that the energy transfer process is related to dipole–dipole interaction. Trivalent Tb-doped materials normally exhibit stronger green emission compared to blue emission, a feature that increases with Tb3+ concentration and is attributed to the cross-relaxation process. In this paper, we show a remarkable blue emission in comparison to other Tb3+-doped glasses. A theoretical model for the blue and green emissions, from 5D3 and 5D4 levels respectively, was proposed to establishing a link between the color emission and the 5D3 lifetime quenching due to a cross-relaxation process. This model was successfully applied to the experimental results of this paper as well as previous data in the literature.

T m 3 + / H o 3 + -codoped low silica calcium aluminosilicate (LSCAS) glasses were prepared and characterized using optical absorption, luminescence decay, and thermal lens techniques. The emission band at 2.0 µm exhibited an enhancement when the Ho concentration was increased. The luminescence quantum efficiency values were determined for both 3 F 4 and 5 I 7 levels of T m 3 + and H o 3 + ions, respectively. The high decrease of the quantum efficiency of the 3 F 4 ( T m 3 + ) level for high H o 3 + concentration evidenced efficient energy transfer processes from T m 3 + to H o 3 + . The heat generated in the energy transfer processes were estimated via a thermal lens experiment, and a rate equation model was proposed to explain the obtained result. The experimental and estimated parameters with the proposed theoretical model are in good agreement. Finally, the results of this work suggest the T m 3 + / H o 3 + -codoped LSCAS is a promising material for applications using the emission around 2.0 µm that is of great interest for biomedical applications.

One of the most significant materials in a solar panel is the glass, which provides transparency, UV protection as well as mechanical and chemical resistance. In this work, we describe the production of prototypes of four solar modules made using borosilicate, zinc-tellurite, Pr$^{3+}$ doped zinc-tellurite, and float glass as cover materials. The performance of these prototypes was evaluated under a solar simulator, and a device was developed to monitor all prototypes under real conditions. A comparison between indoor and outdoor measurements shows that outdoor results are fundamental to evaluate the performance of modified solar modules as the ones considered in this study. In addition, we demonstrate the fundamental role played by the refractive index of cover glasses in the performance of the prototypes, and discuss how this feature could be explored to achieve enhanced devices, as well as other benefits that may arise from this field of research., Comment: 6 pages, 3 figures

We evaluated a hydroalcoholic extract of Sapindus saponaria L. pericarps (ETHOSS), as a candidate to a topical antifungal medicine for onychomycosis. ETHOSS was produced by extracting the crushed fruits in ethanol. The saponin contents were identified and characterized by electrospray ionization mass spectrometry. We measured the in vitro antifungal activity against three dermatophyte fungi, isolated from onychomycosis: Trichophyton rubrum, T. mentagrophytes, and T. interdigitale, using broth microdilution tests. The minimum fungicide concentration of ETHOSS ranged from 195.31 to 781.25 μg/mL. The cytotoxicity of the crude extract was tested on the HeLa cell line, and its ability to permeate into healthy human nails by photoacoustic spectroscopy and Fourier transformation infrared spectrometer (FTIR) spectroscopy by attenuated total reflection. Besides its strong antifungal activity, ETHOSS showed low cytotoxicity in human cells. It was able to permeate and reach the full thickness of the nail in one hour, without the aid of facilitating vehicles, and remained there for at least 24 h. These results suggest that ETHOSS has great potential for treating onychomycosis.

Photoluminescence quantum yields denote a critical variable to characterise a fluorophore and its potential performance. Their determination, by means of methodologies employing reference standard materials, inevitably leads to large uncertainties. In response to this, herein we report for the first time an innovative and elegant methodology, whereby the use of neat solvent/reference material required by thermal lens approaches is eliminated by coupling it to photoluminescence spectroscopy, allowing for the discrimination between materials with similar photoluminescence quantum yields. To achieve this, both radiative and non-radiative transitions are simultaneously measured using a photoluminescence spectrometer coupled to a multiwavelength thermal lens spectroscopy setup in a mode-mismatched dual-beam configuration, respectively. The absorption factor independent ratio of the thermal lens and photoluminescence signals can then be used to determine the fluorescence quantum yield both accurately and precisely. We validated our reported method using rhodamine 6G and further applied it to three novel structurally related diketopyrrolopyrrole based materials, which, in contrast to results obtained by other methods, unveiled significant differences in their photoluminescence quantum yields.

Alternative fuels hold considerable promise as substitutes for petroleum diesel fuel. As such, biodiesel is a promising renewable fuel that has been developed and tested by a number of research groups. Quality control of this transportation fuel is of great significance to its commercialization. Conventional chromatographic and spectroscopic analytical methods are most commonly used for biodiesel characterization, in some cases yielding information detail beyond that needed for the determination of biodiesel quality. By contrast, less common methods, such as photothermal techniques, are well suited to characterize a wide range of transportation fuels. The complexities of photothermal and chemical analytical techniques are roughly similar, as are the costs. Photothermal methods are based on spectroscopic and thermophysical properties of the sample, an advantage with respect to ordinary chromatography and spectroscopy techniques. Furthermore, some photothermal techniques can be adapted for remote signal detection, which can be used for in situ analysis in fuel production for inline biodiesel quality inspection and control. Therefore, an overview and outlook of the photothermal characterization is of considerable interest. In this paper, the applications of photothermal techniques in the characterization of biodiesel, petroleum diesel fuels, and their blends are reviewed. The review includes thermophysical properties and correlations for fuels, determination of blend levels, and biodiesel stability investigations. After the review, discussion and perspective are presented for future improvement of photothermal characterization and industrial applications.

The antifungal application of photodynamic therapy (PDT) has been widely explored. According to superficial nature of tinea capitis and the facility of application of light sources, the use of nanoencapsulated hypericin in P-123 associated with PDT (P123-Hy-PDT) has been a poweful tool to treat this pathology. Thus, the aim of this study was to evaluate the efficiency of P123-Hy-PDT against planktonic cells and in a murine model of dermatophytosis caused by Microsporum canis. In vitro antifungal susceptibility and in vivo efficiency tests were performed, including a skin toxicity assay, analysis of clinical signs by evaluating score, and photoacoustic spectroscopy. In addition, tissue analyses by histopathology and levels of pro-inflammatory cytokines, such as quantitative and qualitative antifungal assays, were employed. The in vitro assays demonstrated antifungal susceptibility with 6.25 and 12.5 μmol/L P123-Hy-PDI; these experiments are the first that have used this treatment of animals. P123-Hyp-mediated PDT showed neither skin nor biochemical alteration in vivo; it was safe for dermatophytosis treatment. Additionally, the treatment revealed rapid improvement in clinical signs at the site of infection after only three treatment sessions, with a clinical score confirmed by photoacoustic spectroscopy. The mycological reduction occurred after six treatment sessions, with a statistically significant decrease compared with untreated infected animals. These findings showed that P123-Hy-PDT restored tissue damage caused by infection, a phenomenon confirmed by histopathological analysis and proinflammatory cytokine levels. Our results reveal for the first time that P123-Hy-PDT is a promising treatment for tinea capitis and tinea corporis caused by M. canis, because it showed rapid clinical improvement and mycological reduction without causing toxicity.

Topical administration can enable a more efficient therapy based on the improved bioavailability and patient compliance. Wounds and infections can lead to modifications of skin physiology and body protective function. Propolis (PRP) is utilized for skin protection and treatment. However, PRP extracts do not show suitable rheological characteristics and can cause irritation, pain, ulceration, and healing difficulties when they are administered on the harmed skin. Emulgels composed of Carbopol 934P (C934P) and different vegetable oils have been proposed for propolis extract release and may be a good strategy for topical delivery. The aim of this study was to investigate the bioadhesive properties, PRP release profile, skin permeation, and retention, by Franz's diffusion cell and photoacoustic spectroscopy (PS), of these emulgels. Formulations were composed of C934P and passion fruit oil (PF), sweet almond oil (SA), or andiroba oil (AO). PRP or by-product extracts were added to the systems, drug release profile was investigated, and porcine ear skin was utilized for analyses of bioadhesive properties, skin permeation, and retention. All formulations displayed similar bioadhesive force (0.05-0.07 N); PRP release was modified (prolonged), dependent on formulation composition, and mainly governed by diffusion. PS and analysis using diffusion cell showed that the systems could provide dermal permeation and retention, which was more effective for formulations containing AO. Considering the importance of propolis for many skin therapies, the emulgels containing AO for PRP delivery are worthy of biological studies and further clinical evaluation.

Natural or synthetic biomaterials are increasingly being used to support bone tissue repair or substitution. The combination of natural calcium phosphates with biocompatible alloys is an important route towards the development of new biomaterials with bioperformance and mechanical responses to mimic those of human bones. This article evaluated the structural, physical, mechanical and biological properties of a new mechanical improved nanocomposite elaborated by association of fish biphasic calcium phosphate (BCP) and niobium pentoxide (Nb2O5). The nanocomposite (Nb-BCP) and the pure BCP, used as a positive control, were obtained by powder metallurgy. The density, porosity and microhardness were measured. The structural analysis was determined by X-ray diffraction (XRD) and the biological properties were studied in histological sections of critical size calvaria defects in rats, 7, 15, 30, 45 and 60 days after implantation of disks of both materials. Morphological description was made after scanning electron microscopy (SEM) and optical microscopy analysis. After sintering, the Nb-BCP nanocomposite presented four crystalline phases: 34.36% calcium niobate (CaNb2O6), 21.68% phosphorus niobium oxide (PNb9O25), 42.55% β-tricalcium phosphate (Ca3(PO4)2) and 1.31% of niobium pentoxide (Nb2O5) and exhibited increases of 17% in density, 66% in Vickers microhardness and 180% in compressive strength compared to pure BCP. In vivo study, showed biocompatibility, bioactivity and osteoconductivity similar to pure BCP. SEM showed the formation of globular accretions over the implanted nanocomposites, representing one of the stages of bone mineralization. In conclusion, the BCP and Nb2O5 formed a nanocomposite exhibiting characteristics that are desirable for a biomaterial, such as bioperformance, higher β-TCP percentage and improved physical and mechanical properties compared to pure BCP. These characteristics demonstrate the promise of this material for supporting bone regeneration.

This work aimed to investigate and compare the composition and the physicochemical properties of 18 different sources of edible vegetable oils. A systematic study on the correlation between composition and physical properties was performed using Fourier Transform Infrared (FTIR) Spectroscopy and fatty acid chromatographic analysis. Principal component analysis of FTIR spectra is performed to classify edible oils concerning their physical properties. The results demonstrate the potentiality of the method associated with multivariate statistics analysis as powerful, fast, and non-destructive tools for characterization and quality control of edible vegetable oils.

To evaluate the remineralization effects of Bioglass 45S5 (BAG) on dentin composition, adhesive-dentin bond strength, as well as interface and diffusion zone thickness.Dentin specimens were assigned to a control group (CG), in which the adhesive was applied following the manufacturer's instructions, and a remineralized group (RG), in which remineralization treatment was carried out by rubbing a remineralization solution (0.015 g of BAG with 1.35 ml of distilled water) on the etched dentin surface for 30 s before applying the adhesive. For bioactive analysis (n = 10), control and remineralized dentin were investigated using micro-Raman spectroscopy (mRS) and scanning electron microscopy (SEM). Stick specimens prepared with a three-step etch-and-rinse adhesive were submitted to a microtensile bond strength (µTBS) test (n = 10) after 24 h (24 h) and eight months (8 m). Micro-RS 3D-maps (n = 10) characterized the adhesive-dentin interface composition and diffusion zone thickness, and SEM images (n = 10) evaluated interface thickness. Data were analyzed using Student's t-test or two-way ANOVA and Tukey-Kramer's post-hoc test (α = 0.05).Remineralization treatment increased the mineral content of dentin. Mean µTBSs were statistically different at 24 h, with RG higher than CG; however, this difference was not significant at 8 m. When the adhesive was applied on remineralized dentin, its penetration was reduced, its physical interaction with phosphate was improved, and its degree of conversion increased. The diffusion zone in the CG did not differ from that of the RG, and interface thickness values of the CG did not differ from that of the RG.Remineralization treatment promoted mineral growth on the dentin surface, improved the interaction of dentin with adhesive monomers, and consequently resulted in higher immediate bond strengths.

Background It is known that bulk-fill have been widely studied and used by dentists in the clinic. However, the use of light-curing units that do not have the ability to adequately light-cure these materials at the appropriate depth can affect their clinical performance. The aim of this study was evaluating the influence of 5 different light curing units (LCUs) on the degree of conversion (DC) of a bulk-fill resin at depths of 0 to 4 mm and determined the effect of using 20s exposure and 40s. Material and methods Cylinders of composite were made in a stainless steel matrix (n=10). The specimens were exposed from the top surface using 5 LCUs: Valo® Cordless (VA); Radii Plus (RA); Emitter.D (EM), Biolux Plus (BI), Woodpecker® (WO). The emission wavelength and the power density was determined. After the photoactivation, the Raman vibrational modes were calculated taking as reference the peaks at 1,601 (aromatic bonds C=C) and 1,640 cm-1 (aliphatic bonds C=C). Results The largest difference in DC in 20s, comparing the values obtained in the first and last layer is for BI, with a variation from 61.24% to 53.86%. Comparing the LCUs, the last layer in 40s DC values are 57.40% (BI), 58.21% (WO), 58.97% (VA), 60.90% (RA) and 62.42% (EM). The higher the dose (J/cm²) and the close the λmax is to the maximum CQ absorption length (λmax ~ 470 nm) the better the DC value. Conclusions There was a significant difference in the DC values between the LCUs with increasing depth of the bulk-fill increments. Results indicate significant differences in DC among the different LCUs as well as enhanced DC when using 40s exposure compared to 20s. It is suggested that for DC improvement using lower power photoactivator increase the exposure time the exposure time should be 20s to 40s. Key words:Polymerization, Composite Resins, Raman spectroscopy.