Search

The Soil Moisture and Ocean Salinity (SMOS) mission of the European Space Agency (ESA), together with NASA’s Soil Moisture Active Passive (SMAP) mission, is providing a wealth of information to the user community for a wide range of applications. Although both missions are still operational, they have significantly exceeded their design life time. For this reason, ESA is looking at future mission concepts, which would adequately address the requirements of the passive L-band community beyond SMOS and SMAP. This article proposes one mission concept, TriHex, which has been found capable of achieving high spatial resolution, radiometric resolution, and accuracy, approaching the user needs. This is possible by the combination of aperture synthesis, formation flying, the use of general circular orbits, and alias-free imaging.

During the tandem phase of Sentinel-3A and Sentinel-3B in summer 2018 the Ocean and Land Colour Imager (OLCI) mounted on the Sentinel-3B satellite was reprogrammed to mimics ESA's eighth Earth Explorer, the FLuorescence EXplorer (FLEX). The OLCI in FLEX configuration (OLCI-FLEX) had 45 spectral bands between 500 and 792 nm. The new data set with high-spectral-resolution measurements (bandwidth: 1.7–3.7 nm) serves as preparation for the FLEX mission. Spatially co-registered measurements of both instruments are used for the atmospheric correction and the retrieval of surface parameters, e.g. the fluorescence or the leaf area index. For such combined products, it is essential that both instruments are radiometrically consistent. We developed a transfer function to compare radiance measurements from different optical sensors and to monitor their consistency. In the presented study, the transfer function shifts information gained from high-resolution “FLEX-mode” settings to information convolved with the spectral response of the normal (lower) spectral resolution of the OLCI sensor. The resulting reconstructed low-resolution radiance is representative of the high-resolution data (OLCI-FLEX), and it can be compared with the measured low-resolution radiance (OLCI-A measurements). This difference is used to quantify systematic differences between the instruments. Applying the transfer function, we could show that OLCI-A is about 2 % brighter than OLCI-FLEX for most bands of the OLCI-FLEX spectral domain. At the longer wavelengths (> 770 nm) OLCI-A is about 5 % darker. Sensitivity studies showed that the parameters affecting the quality of the comparison of OLCI-A and OLCI-FLEX with the transfer function are mainly the surface reflectance and secondarily the aerosol composition. However, the aerosol composition can be simplified as long as it is treated consistently in all steps in the transfer function. Generally, the transfer function enables direct comparison of instruments with different spectral responses even with different observation geometries or different levels of observation. The method is sensitive to measurement biases and errors resulting from the processing. One application could be the quality control of the FLEX mission; presently it is also useful for the quality control of the OLCI-FLEX data.

The detection of solar induced chlorophyll fluorescence (SIF) in the field with spectrometers is based on the depth of the solar Fraunhofer or oxygen absorption lines in the upwelling radiance compared to that in the downwelling irradiance. This relative depth enables the differentiation of SIF from the reflected radiation. Recent studies have shown that if oxygen bands are used to retrieve SIF from tower-based measurements, then atmospheric correction is required. This study presents a band shape fitting (BSF) approach to retrieve both the relative optical path length (deepening) and SIF (infilling) from field measurements at the same time, using information in the measured spectral shape of the O2 feature. This approach is an alternative to using radiative transfer process models for estimating atmospheric transmittance. The method was applied to measurements taken from 100 m elevation above a forest, yielding plausible results for SIF in the O2A and O2B bands. The sensitivity to combined atmospheric and instrument characteristics prohibits application at much greater distances from the surface.

We report a unique multiyear L-band microwave radiometry dataset collected at the Maqu site on the eastern Tibetan Plateau and demonstrate its utilities in advancing our understandings of microwave observations of land surface processes. The presented dataset contains measurements of L-band brightness temperature by an ELBARA-III microwave radiometer in horizontal and vertical polarization, profile soil moisture and soil temperature, turbulent heat fluxes, and meteorological data from the beginning of 2016 till August 2019, while the experiment is still continuing. Auxiliary vegetation and soil texture information collected in dedicated campaigns are also reported. This dataset can be used to validate the Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) satellite based observations and retrievals, verify radiative transfer model assumptions and validate land surface model and reanalysis outputs, retrieve soil properties, as well as to quantify land-atmosphere exchanges of energy, water and carbon and help to reduce discrepancies and uncertainties in current Earth System Models (ESM) parameterizations. Measurement cases in winter, pre-monsoon, monsoon and post-monsoon periods are presented., Measurement(s) microwave radiation • soil moisture • atmospheric wind • Solar Radiation • rain • soil • CO2/H2O flux • thermal radiation • temperature of soil Technology Type(s) Radiometry (Microwave) • Sensor Device • pyranometer • Gauge or Meter Device • particle size analyzer • pyrgeometer Sample Characteristic - Environment land Sample Characteristic - Location Tibetan Plateau Machine-accessible metadata file describing the reported data: 10.6084/m9.figshare.12818261

Microwave brightness temperature (Tb) and backscatter ( $\sigma ^{0}$ ) observations from the Soil Moisture and Ocean Salinity (SMOS) mission, Soil Moisture Active Passive (SMAP) mission, Advanced Microwave Scanning Radiometer 2 (AMSR2) instrument, and Advanced Scatterometer (ASCAT) instrument provide a wealth of operationally available satellite data for soil moisture retrieval and data assimilation purposes. To assist the synergistic and efficient use of such techniques, the soil moisture information content in the respective Level-1 observations needs to be determined. Within this context, we compare L-, C-, and X-band Tb and $\sigma ^{0}$ signatures of the above-named sensors to in situ SM observations in Spain, Australia, and USA. We find that L-band Tb observations from SMOS and SMAP show the best overall performance given the considered diagnostics (correlation, anomaly correlation, and sensitivity), while all sensors provide significant soil moisture information. This finding is consistent across the analyzed incidence angle range for SMOS (25°–60°). The results are discussed with respect to physical processes governing the dynamics of Tb and $\sigma ^{0}$ , noting dependencies on vegetation seasonality and land surface temperature.

The upcoming Fluorescence Explorer (FLEX) satellite mission aims to provide high quality radiometric measurements for subsequent retrieval of sun-induced chlorophyll fluorescence (SIF). The combination of SIF with other observations stemming from the FLEX/Sentinel-3 tandem mission holds the potential to assess complex ecosystem processes. The calibration and validation (cal/val) of these radiometric measurements and derived products are central but challenging components of the mission. This contribution outlines strategies for the assessment of in situ radiometric measurements and retrieved SIF. We demonstrate how in situ spectrometer measurements can be analysed in terms of radiometric, spectral and spatial uncertainties. The analysis of more than 200 k spectra yields an average bias between two radiometric measurements by two individual spectrometers of 8%, with a larger variability in measurements of downwelling radiance (25%) compared to upwelling radiance (6%). Spectral shifts in the spectrometer relevant for SIF retrievals are consistently below 1 spectral pixel (up to 0.75). Found spectral shifts appear to be mostly dependent on temperature (as measured by a temperature probe in the instrument). Retrieved SIF shows a low variability of 1.8% compared with a noise reduced SIF estimate based on APAR. A combination of airborne imaging and in situ non-imaging fluorescence spectroscopy highlights the importance of a homogenous sampling surface and holds the potential to further uncover SIF retrieval issues as here shown for early evening acquisitions. Our experiments clearly indicate the need for careful site selection, measurement protocols, as well as the need for harmonized processing. This work thus contributes to guiding cal/val activities for the upcoming FLEX mission.

International audience; The northern land biosphere is believed to be the main global sink of CO2, but the contribution of Europe is uncertain. While bottom-up estimates and inverse atmospheric transport studies based on atmospheric CO2 observed in situ or from space by OCO-2 point to a moderate rate of uptake, some other inversions based on remotely sensed atmospheric CO2 from GOSAT/SCIAMACHY and biomass estimates from passive microwave satellite data point to a large sink of around 1 Gt C/yr. We present results from combining both approaches in a data assimilation framework, inverting a biosphere model against in situ atmospheric CO2 and passive microwave measurements. When assimilating all observations, we estimate a European carbon sink of 0.303 +/- 0.083 Gt C/yr for 2010-2015. The result agrees with other bottom-up studies and atmospheric inversions using in situ CO2 or OCO-2 observations pointing to potential data problems when using observations from GOSAT or SCIAMACHY to estimate the European CO2 sink.

In this paper we present L-band data usage for Numerical Weather Prediction applications and Emergency Services at the European Centre for Medium-Range Weather Forecasts (ECMWF).

International audience

In the framework of its Earth Observation Programmes the European Space Agency (ESA) carries out ground based and airborne campaigns to support geophysical algorithm developments, calibration/validation activities, simulation of future space-borne earth observation missions, as well as application developments related to remote sensing of the atmosphere, land, oceans, solid earth and cryosphere.ESA has conducted over 150 airborne and ground based measurement campaigns in the last 37 years, of which more than 80 were carried out since 2005. During this period a large number of campaigns have supported the validation of ESA’s satellite missions including for example SMOS and CryoSat. Ongoing activities are focusing on e.g. Sentinel-5Precursor and the preparation of upcoming Earth Explorer missions such as BIOMASS, FLEX, and FORUM. These validation campaigns aim to provide fundamental information about the confidence of data products and their required uncertainties One challenge in this context is a comprehensive understanding and characterization of measurement uncertainty of the validation dataset and the spatial and temporal support or representativity of these.We will provide an overview of applied strategies to tackle these aspects for existing satellite missions and outline concepts for future missions, and how these integrate into broader earth observation science strategies. In addition, we will highlight recent activities and outline planned activities for the coming years.

Lightning‐caused wildfires are a significant contributor to burned areas, with lightning ignitions remaining one of the most unpredictable aspects of the fire environment. There is a clear connection between fuel moisture and the probability of ignition; however, the mechanisms are poorly understood and predictive methods are underdeveloped. Establishing a lightning–ignition relationship would be useful in developing a model that would complement early warning systems designed for fire control and prevention. A machine learning (ML) approach was used to define a predictive model for wildfire ignition based on lightning forecasts and environmental conditions. Three different binary classifiers were adopted: a decision tree, an AdaBoost and a Random Forest, showing promising results, with both ensemble methods (Random Forest and AdaBoost) exhibiting an out‐of‐sample accuracy of 78%. Data provided by a Western Australia wildfire database allowed a comprehensive verification on over 145 lightning‐ignited wildfires in regions of Australia during 2016. This highlighted that in a minimum of 71% of the cases the ML models correctly predicted the occurrence of an ignition when a fire was actually initiated. The super‐learner developed is planned to be used in an operational context to the enhance information connected to fire management.

After almost 10 years in operation (SMOS- Aquarius - SMAP) the very high potential of L band radiometry is clearly demonstrated. Several applications are already operational (assimilation at ECMWF, for hurricanes, for sea ice etc.) so it is crucial to maintain such measurements. To do so while satisfying the current missions specifications is also of prime importance. Degrading spatial resolution is thus a significant step back which will impact science and applications). These missions are now getting older and the goal of the study presented in this paper is to assess which planned mission could fulfill the requirements to ensure data continuity. For this purpose, an extensive users' requirements study was performed in 2018–2019 assessing what would be required in the near future as well as when L band radiometry was absolutely necessary to satisfy the requirements. From the gathered results a cluster analysis was performed and the only

In this study the impacts of Soil Moisture and Ocean Salinity (SMOS) soil moisture data assimilation upon the streamflow prediction of the operational Global Flood Awareness System (GloFAS) were investigated. Two GloFAS experiments were performed, one which used hydro-meteorological forcings produced with the assimilation of the SMOS data, the other using forcings which excluded the assimilation of the SMOS data. Both sets of experiment results were verified against streamflow observations in the United States and Australia. Skill scores were computed for each experiment against the observation datasets, the differences in the skill scores were used to identify where GloFAS skill may be affected by the assimilation of SMOS soil moisture data. In addition, a global assessment was made of the impact upon the 5th and 95th GloFAS flow percentiles to see how SMOS data assimilation affected low and high flows respectively. Results against in-situ observations found that GloFAS skill score was only affected by a small amount. At a global scale, the results showed a large impact on high flows in areas such as the Hudson Bay, central United States, the Sahel and Australia. There was no clear spatial trend to these differences as opposing signs occurred within close proximity to each other. Investigating the differences between the simulations at individual gauging stations showed that they often only occurred during a single flood event; for the remainder of the simulation period the experiments were almost identical. This suggests that SMOS data assimilation may affect the generation of surface runoff during high flow events, but may have less impact on baseflow generation during the remainder of the hydrograph. To further understand this, future work could assess the impact of SMOS data assimilation upon specific hydrological components such as surface and subsurface runoff.

International audience; This paper presents the forward modelling aspects of the SMOS (Soil Moisture and Ocean Salinity) activities at ECMWF (European Centre for Medium-Range Weather Forecasts). Several parameterizations of the Community Microwave Emission Modelling Platform (CMEM) are used to simulate L-band Brightness Temperatures (TBs) and compared to the SMOS TBs for 2010-2011. We show that simulated TBs are primarily sensitive, by order of importance, to the soil roughness model, the vegetation opacity and the soil dielectric model. In particular, best CMEM results are obtained with the simple Wigneron soil roughness model and the Wigneron model for the vegetation opacity. For the soil dielectric model, performances of the Wang and Schmugge and the Mironov models are shown to be similar and better than the Dobson model. The Wang and Schmugge model is then used in the next steps of this paper combined with the Wigneron roughness and vegetation models. The paper describes a multi-angular multi-polarised bias correction method based on a linear rescaling (mean and variance) computed at the monthly scale using SMOS observations and ECMWF-CMEM re-analysed TBs for a four year period (2010-2013). Results show that for 2010-2013 the seasonal multi-angular multi-polarisation bias correction approach reduces global RMSE to 7.91 K, compared to 16.7 K before bias correction, whereas the mean absolute bias is reduced to 1.39 K, compared to 11.04 K before bias correction. The consistency between the seasonality of simulated and the observed TBs is also improved by using a monthly bias correction, leading to correlation values improvement to 0.62 after bias correction compared to 0.56 before. The 2010-2013 bias correction applied to the 2014-2016 period at 40°incidence reduces the global RMSE from 15.56 K to 8.19 K, and the mean absolute bias from 10.16 K to 2.51 K, with no impact on the correlation values that remain at 0.61 in both cases. Long term monitoring of SMOS TB is presented covering a 7-year period (2010-2016) at both polarisations, at 40°incidence angle. Results show that the consistency between SMOS and ECMWF reanalysis-based TBs progressively improved between 2010 and 2016, pointing out improvements of level 1 SMOS TB products quality through the SMOS lifetime.

Sea ice is a crucial component for short-, medium- and long-term numerical weather predictions. Most importantly, changes of sea ice coverage and areas covered by thin sea ice have a large impact on heat fluxes between the ocean and the atmosphere. L-band brightness temperatures from ESA's Earth Explorer SMOS (Soil Moisture and Ocean Salinity) have been proven to be a valuable tool to derive thin sea ice thickness. These retrieved estimates were already successfully assimilated in forecasting models to constrain the ice analysis, leading to more accurate initial conditions and subsequently more accurate forecasts. However, the brightness temperature measurements can potentially be assimilated directly in forecasting systems, reducing the data latency and providing a more consistent first guess. As a first step towards such a data assimilation system we studied the forward operator that translates geophysical parameters provided by a model into brightness temperatures. We use two different radiative transfer models to generate top of atmosphere brightness temperatures based on ORAP5 model output for the 2012/2013 winter season. The simulations are then compared against actual SMOS measurements. The results indicate that both models are able to capture the general variability of measured brightness temperatures over sea ice. The simulated brightness temperatures are dominated by sea ice coverage and thickness changes are most pronounced in the marginal ice zone where new sea ice is formed. There we observe the largest differences of more than 20 K over sea ice between simulated and observed brightness temperatures. We conclude that the assimilation of SMOS brightness temperatures yields high potential for forecasting models to correct for uncertainties in thin sea ice areas and suggest that information on sea ice fractional coverage from higher-frequency brightness temperatures should be used simultaneously.

Long-term climate records of soil moisture are of increased importance to climate researchers. In this study, we aim to evaluate the quality of three different fusion approaches that combine soil moisture retrieval from multiple satellite sensors. The arrival of L-band missions has led to an increased focus on the integration of L-band-based soil moisture retrievals in climate records, emphasizing the need to improve our understanding based on its added value within a multi-sensor framework. The three evaluated approaches were developed on 10-year passive microwave data (2003-2013) from two different satellite sensors, i.e., SMOS (2010-2013) and AMSR-E (2003-2011), and are based on a neural network (NN), regressions (REG), and the Land Parameter Retrieval Model (LPRM). The ability of the different approaches to best match AMSR-E and SMOS in their overlapping period was tested using an inter-comparison exercise between the SMOS and AMSR-E datasets, while the skill of the individual soil moisture products, based on anomalies, was evaluated using two verification techniques; first, a data assimilation technique that links precipitation information to the quality of soil moisture (expressed as the Rvalue), and secondly the triple collocation analysis (TCA). ASCAT soil moisture was included in the skill evaluation, representing the active microwave-based counterpart of soil moisture retrievals. Besides a semi-global analysis, explicit focus was placed on two regions that have strong land-atmosphere coupling, the Sahel (SA) and the central Great Plains (CGP) of North America. The NN approach gives the highest correlation coefficient between SMOS and AMSR-E, closely followed by LPRM and REG, while the absolute error is approximately the same for all three approaches. The Rvalue and TCA show the strength of using different satellite sources and the impact of different merging approaches on the skill to correctly capture soil moisture anomalies. The highest performance is found for AMSR-E over sparse vegetation, for SMOS over moderate vegetation, and for ASCAT over dense vegetation cover. While the two SMOS datasets (L3 and LPRM) show a similar performance, the three AMSR-E datasets do not. The good performance for AMSR-E over spare vegetation is mainly perceived for AMSR-E LPRM, benefiting from the physically based model, while AMSR-E NN shows improved skill in densely vegetated areas, making optimal use of the SMOS L3 training dataset. AMSR-E REG has a reasonable performance over sparsely vegetated areas; however, it quickly loses skill with increasing vegetation density. The findings over the SA and CGP mainly reflect results that are found in earlier sections. This confirms that historical soil moisture datasets based on a combination of these sources are a valuable source of information for climate research.

Measurements of the surface soil moisture (SM) content are important for a wide range of applications. Among them, operational hydrology and numerical weather prediction, for instance, need SM information in near-real-time (NRT), typically not later than 3 h after sensing. The European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) satellite is the first mission specifically designed to measure SM from space. The ESA Level 2 SM retrieval algorithm is based on a detailed geophysical modelling and cannot provide SM in NRT. This paper presents the new ESA SMOS NRT SM product. It uses a neural network (NN) to provide SM in NRT. The NN inputs are SMOS brightness temperatures for horizontal and vertical polarizations and incidence angles from 30 to 45°. In addition, the NN uses surface soil temperature from the European Centre for Medium-Range Weather Forecasts (ECMWF) Integrated Forecast System (IFS). The NN was trained on SMOS Level 2 (L2) SM. The swath of the NRT SM retrieval is somewhat narrower (∼ 915 km) than that of the L2 SM dataset (∼ 1150 km), which implies a slightly lower revisit time. The new SMOS NRT SM product was compared to the SMOS Level 2 SM product. The NRT SM data show a standard deviation of the difference with respect to the L2 data of 3 m−3 in most of the Earth and a Pearson correlation coefficient higher than 0.7 in large regions of the globe. The NRT SM dataset does not show a global bias with respect to the L2 dataset but can show local biases of up to 0.05 m3 m−3 in absolute value. The two SMOS SM products were evaluated against in situ measurements of SM from more than 120 sites of the SCAN (Soil Climate Analysis Network) and the USCRN (US Climate Reference Network) networks in North America. The NRT dataset obtains similar but slightly better results than the L2 data. In summary, the NN SMOS NRT SM product exhibits performances similar to those of the Level 2 SM product but it has the advantage of being available in less than 3.5 h after sensing, complying with NRT requirements. The new product is processed at ECMWF and it is distributed by ESA and via the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT) multicast service (EUMETCast).