Search

Optoacoustic (photoacoustic) imaging enables high-resolution optical imaging at depths well beyond optical microscopy, revolutionizing optical interrogation of tissues. Operation in the near-infrared (NIR) is nevertheless necessary to capitalize on the technology potential and reach depths of several centimeters. Using Flash NanoPrecipitation for highly-scalable single-step encapsulation of hydrophobic hexacene at self-quenching concentrations, we propose quenched fluorescence-dye nanoparticles as a potent alternative to NIR metal nanoparticles for strong optoacoustic signal generation. Comprehensive hexacene-based nanoparticle characterization was based on a 5-step approach that examined the physicochemical features (Step 1), optoacoustic signal generation (Step 2), stability (Step 3), biocompatibility (Step 4) and spectral sensitivity (Step 5). Using this characterization framework we showcase the discovery of two nanoparticle formulations, QH2-50 nm and QH2-100 nm that attain superior stability characteristics and optimal optoacoustic properties compared to gold standards commonly employed for near-infrared optoacoustics. We discuss encapsulation and self-quenching (ESQ) of organic dyes as a promising strategy to generate optimal optoacoustic particles.

Through a close examination of the intermolecular interactions of rubrene (1a) and select derivatives (1b–1p), a clearer understanding of why certain fluorinated rubrene derivatives pack with planar tetracene backbones has been achieved. In this study we synthesized, crystallized, and determined the packing structure of new rubrene derivatives (1h–p). Previously, we proposed that introducing electron-withdrawing CF3 substituents induced planarity by reducing intramolecular repulsion between the peripheral aryl groups (1e–g). However, we found that in most cases, further increasing the fluorine content of rubrene lead to twisted tetracene backbones in the solid state. To understand how rubrene (1a) and its derivatives (1b–p) pack in the solid state, we (re)examined the crystal structures through a systematic study of the close contacts. We found that planar tetracene cores occur when close contacts organize to produce an S symmetry element about a given rubrene molecule. We report the first instance of rub...

Biocompatible and biostable EtTP-5-loaded organic core–shell nanoparticles have been successfully evaluated for their potential as red-emitting fluorescent nanoprobes for two-photon imaging. Readily formed by Flash NanoPrecipitation, EtTP-5-based nanoprobes proved to penetrate well into multicellular spheroids and were easily imaged through several cell layers within these complex, 3D tissue models.

International audience; have revealed the simultaneous presence of both high room temperature hole mobility above 10 cm 2 V −1 s −1[5] and, crucially , a negative temperature exponent for the mobility, i.e., mobility increases as temperature decreases down to about 180 K. [6] These observations and others, including mobility anisotropy [7,8] and a robust Hall effect, [9,10] are strong evidence for band-like transport in rubrene (band-width ≈0.5 eV), [11] where many features of classical band transport are observed. However, the estimated carrier mean free paths remain on the order of the unit cell dimension (≈1 nm), thus precluding the typical band picture in conventional semiconductors. The precise nature of band-like transport in organic semiconductor crystals is still being explored. [12] Currently, a consistent picture of charge transport in high mobility crystals is offered by the dynamic disorder model (DDM, also known as transient localization), in which the carrier transient localization length l loc and the propagation rate ω are determined by a competition between intermolecular electronic coupling and charge-phonon interaction ; in this scenario the carrier mobility μ can be evaluated as [13] µ ω = B loc 2 e k T l (1) Isotopic substitution is a useful method to study the influence of nuclear motion on the kinetics of charge transport in semiconductors. However, in organic semiconductors, no observable isotope effect on field-effect mobility has been reported. To understand the charge transport mechanism in rubrene, the benchmark organic semiconductor, crystals of fully isotopically substituted rubrene, 13 C-rubrene (13 C 42 H 28), are synthesized and characterized. Vapor-grown 13 C-rubrene single crystals have the same crystal structure and quality as native rubrene crystals (i.e., rubrene with a natural abundance of carbon isotopes). The characteristic transport signatures of rubrene, including room temperature hole mobility over 10 cm 2 V −1 s −1 , intrinsic band-like transport, and clear Hall behavior in the accumulation layer of air-gap transistors, are also observed for 13 C-rubrene crystals. The field-effect mobility distributions based on 74 rubrene and 13 C-rubrene devices, respectively, reveal that 13 C isotopic substitution produces a 13% reduction in the hole mobility of rubrene. The origin of the negative isotope effect is linked to the redshift of vibrational frequencies after 13 C-substitution, as demonstrated by computer simulations based on the transient localization (dynamic disorder) scenario. Overall, the data and analysis provide an important benchmark for ongoing efforts to understand transport in ordered organic semiconductors.

In the rapidly expanding field of biomedical imaging, there is a need for nontoxic, photostable, and nonquenching fluorophores for fluorescent imaging. We have successfully encapsulated a new, extremely hydrophobic, pentacene-based fluorescent dye within polymeric nanoparticles (NPs) or nanocarriers (NCs) via the Flash NanoPrecipitation (FNP) process. Nanoparticles and dye-loaded micelles were formulated by FNP and characterized by dynamic light scattering, fluorescence spectroscopy, UV–VIS absorbance spectroscopy, and confocal microscopy. These fluorescent particles were loaded from less than 1 % to 78 % by weight core loading and the fluorescence maximum was found to be at 2.3 wt.%. The particles were also stably formed at 2.3 % core loading from 20 up to 250 nm in diameter with per-particle fluorescence scaling linearly with the NC core volume. The major absorption peaks are at 458, 575, and 625 nm, and the major emission peaks at 635 and 695 nm. In solution, the Et-TP5 dye displays a strong concentration-dependent ratio of the emission intensities of the first two emission peaks, whereas in the nanoparticle core the spectrum is independent of concentration over the entire concentration range. A model of the fluorescence quenching was consistent with Forster resonant energy transfer as the cause of the quenching observed for Et-TP5. The Forster radius calculated from the absorption and emission spectra of Et-TP5 is 4.1 nm, whereas the average dye spacing in the particles at the maximum fluorescence is 3.9 nm. We have successfully encapsulated Et-TP5, a pentacene derivative dye previously only used in light-emitting diode applications, within NCs via the FNP process. The extreme hydrophobicity of the dye keeps it encapsulated in the NC core, its extended pentacene structure gives it relatively long wavelength emission at 695 nm, and the pentacene structure, without oxygen or nitrogen atoms in its core, makes it highly resistant to photobleaching. Its bulky side groups minimize self-quenching and localization within the nanoparticle core prevents interaction of the dye with biological surfaces, or molecules in diagnostic assays. Loading of dye in the NP core allows 25 times more dye to be delivered than if it were conjugated onto the nanocarrier surface. The utility of the dye for quantifying nanoparticle binding is demonstrated. Studies to extend the wavelength range of these pentacene dyes into the near infra-red are underway.

Device function in organic electronics is critically governed by the transport of charge across interfaces of dissimilar materials. Accurate measurements of energy level positions in organic electronic devices are therefore necessary for assessing the viability of new materials and optimizing device performance. In contrast to established methods that are used in solution or vacuum environments, here we combine Kelvin probe measurements performed in ambient environments to obtain work function values with photoelectron spectroscopy in air to obtain ionization potential, so that a complete energy level diagram for organic semiconductors can be determined. We apply this new approach to study commonly used electron donor and acceptor materials in organic photovoltaics (OPV), including poly(3-hexylthiophene) (P3HT), [6,6]-phenyl C61 butyric acid methyl ester (PCBM), and ZnO, as well as examine new materials. Band alignments across the entire OPV devices are constructed and compared with actual device performance. The ability to determine interfacial electronic properties in the devices enables us to answer the outstanding question: why previous attempts to make OPV devices using 6,13-bis(triisopropylsilylethynyl) (TIPS)-pentacene as the electron donor were not successful.

The synthesis of dioxolane-functionalized hexacenes and heptacenes is reported. While heptacenes were too reactive to be successfully isolated, hexacenes showed higher stability and characteristic long-wavelength fluorescence both in solution and in the solid state as crystalline powders.

Propazine (2-chloro-4,6-diisopropylamino-1,3,5-triazine) is a triazine herbicide used to control broadleaf weeds and annual grasses during the production of milo grain sorghum. This compound provides post-emergent protection by interfering with photosynthetic electron transport of target weeds. Tolerant crops are able to degrade the applied herbicide to nontoxic metabolites. Propazine is electrochemically active under acidic conditions. Electrochemical reduction pathways for this herbicide have been proposed based on differential pulse polarography (DPP) studies. Theoretical deconvolutions of the experimental polarograms were consistent with a 2-electron cleavage of the C–Cl bond via a mechanism involving a protonation step in between the two electron transfers. The resulting intermediate was then reduced by an irreversible 2-electron reduction of the ring to produce the final product. We report supporting nuclear magnetic resonance (NMR) evidence for the electrochemical dechlorination of propazine and reduction of the triazine ring using controlled potential electrolysis (CPE) and a mercury pool electrode under acidic conditions.

Singlet exciton fission is the spin-conserving transformation of one spin-singlet exciton into two spin-triplet excitons. This exciton multiplication mechanism offers an attractive route to solar cells that circumvent the single-junction Shockley-Queisser limit. Most theoretical descriptions of singlet fission invoke an intermediate state of a pair of spin-triplet excitons coupled into an overall spin-singlet configuration, but such a state has never been optically observed. In solution, we show that the dynamics of fission are diffusion limited and enable the isolation of an intermediate species. In concentrated solutions of bis(triisopropylsilylethynyl)[TIPS]--tetracene we find rapid (

Electronic disorder in organic semiconductor single crystals, manifested as parallel surface potential domains with potential variations ranging from tens to hundreds of mV, is observed by scanning Kelvin probe microscopy. Chemical etching and X-ray diffraction indicate that the potential domains are correlated with planar defects such as stacking faults. The results have important implications for understanding structure–transport relationships in organic semiconductor single crystals.

We report the simultaneous observation of geminate and nongeminate triplet-triplet annihilation in a solution-processable small molecule TIPS-tetracene undergoing singlet exciton fission. Using optically detected magnetic resonance, we identify recombination of triplet pairs directly following singlet fission, as well as recombination of triplet excitons undergoing bimolecular triplet-triplet annihilation. We show that the two processes give rise to distinct magnetic resonance spectra, and estimate the interaction between geminate triplet excitons to be 60 neV.

Over the last decade, researchers have investigated the electrochemical reduction pathways of a popular triazine herbicide known as atrazine (2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine) using controlled potential electrolysis and a mercury pool electrode. There is general agreement that a two-electron dechlorination process is a likely reduction pathway. However, Faraday’s law calculations indicated an overall four-electron reduction process. Additional pathways including the elimination of the ethyl group, elimination of the ethylamino group, and reduction of the triazine ring have been proposed. We believe to have NMR evidence for the reduction of the triazine ring using controlled potential electrolysis and a mercury pool electrode. We would like to add our results to the ongoing studies of this important triazine herbicide.

Treatment of tuberculosis is impaired by poor drug bioavailability, systemic side effects, patient non-compliance, and pathogen resistance to existing therapies. The mannose receptor (MR) is known to be involved in the recognition and internalization of Mycobacterium tuberculosis. We present a new assembly process to produce nanocarriers with variable surface densities of mannose targeting ligands in a single step, using kinetically-controlled, block copolymer-directed assembly. Nanocarrier association with murine macrophage J774 cells expressing the MR is examined as a function of incubation time and temperature, nanocarrier size, dose, and PEG corona properties. Amphiphilic diblock copolymers are prepared with terminal hydroxyl, methoxy, or mannoside functionality and incorporated into nanocarrier formulations at specific ratios by Flash NanoPrecipitation. Association of nanocarriers protected by a hydroxyl-terminated PEG corona with J774 cells is size dependent, while nanocarriers with methoxy-terminated PEG coronas do not associate with cells, regardless of size. Specific targeting of the MR is investigated using nanocarriers having 0-75% mannoside-terminated PEG chains in the PEG corona. This is a wider range of mannose densities than has been previously studied. Maximum nanocarrier association is attained with 9% mannoside-terminated PEG chains, increasing uptake more than 3-fold compared to non-targeted nanocarriers with a 5kgmol(-1) methoxy-terminated PEG corona. While a 5kgmol(-1) methoxy-terminated PEG corona prevents non-specific uptake, a 1.8kgmol(-1) methoxy-terminated PEG corona does not sufficiently protect the nanocarriers from nonspecific association. There is continuous uptake of MR-targeted nanocarriers at 37°C, but a saturation of association at 4°C. The majority of targeted nanocarriers associated with J774E cells are internalized at 37°C and uptake is receptor-dependent, diminishing with competitive inhibition by dextran. This characterization of nanocarrier uptake and targeting provides promise for optimizing drug delivery to macrophages for TB treatment and establishes a general route for optimizing targeted formulations of nanocarriers for specific delivery at targeted sites.

Hexacene, an acene with six benzene rings, is notable for its exceptionally small triplet energy, around one third of the singlet energy. Herein, singlet fission, i.e., conversion of a singlet exciton into two triplets, is demonstrated in a thin film of hexacene derivative, employing both transient absorption spectroscopy and magnetic field effects on photocurrent.

Microfluidic approaches for controlled generation of colloidal clusters, e.g., via encapsulation of colloidal particles in droplets, have been used for the synthesis of functional materials including drug delivery carriers. Most of the studies, however, use a low concentration of an original colloidal suspension (< 10 wt%). Here we demonstrate microfluidic approaches for directly making droplets with moderate (10–25 wt%) and high (> 60 wt%) particle concentrations. Three types of microfluidic devices, PDMS flow-focusing, PDMS T-junction, and microcapillary devices, are investigated for direct encapsulation of a high concentration of polystyrene (PS) nanoparticles in droplets. In particular, it is shown that PDMS devices fabricated by soft lithography can generate droplets from a 25 wt% PS suspension, whereas microcapillary devices made from glass capillary tubes are able to produce droplets from a 67 wt% PS nanoparticle suspension. When the PS concentration is between 0.6 and 25 wt%, the size of the droplets is found to change with the oil-to-water flow rate ratio and is independent of the concentration of particles in the initial suspensions. Drop sizes from ~12 to 40 μm are made using flow rate ratios Qoil/Qwater from 20 to 1, respectively, with either of the PDMS devices. However, clogging occurs in PDMS devices at high PS concentrations (> 25 wt%) arising from interactions between the PS colloids and the surface of PDMS devices. Glass microcapillary devices, on the other hand, are resistant to clogging and can produce droplets continuously even when the concentration of PS nanoparticles reaches 67 wt%. We believe that our findings indicate useful approaches and guidelines for the controlled generation of emulsions of microparticles that are filled with a high loading of nanoparticles and which are useful for drug delivery applications.

these linearly fused hydro-carbons have made significant contributions to the under-standing of electronic processes in organic semiconductors.Despite the utility of these compounds, the selection ofmaterials suitable for exploration essentially stops at penta-cene. Although numerous studies have predicted enticingelectronic properties for larger acenes