Search

The application of additive manufacturing principles to hydrogel processing represents a powerful route to develop porous three-dimensional constructs with a variety of potential biomedical applications, such as scaffolds for tissue engineering and three-dimensional in vitro tissue models. The aim of this study was to develop novel porous hydrogels based on a microstructured polyelectrolyte complex between chitosan and poly(γ-glutamic acid) by applying a computer-aided wet-spinning technique. The developed fabrication process was used to build up three-dimensional porous hydrogels by collecting microstructured layers made of chitosan/poly(γ-glutamic acid) on top of the other. Microstructured polyelectrolyte complex hydrogels were characterized and compared to chitosan/poly(γ-glutamic acid) porous hydrogels with similar composition prepared by conventional freeze-drying technique. Fourier transform infrared analysis confirmed the formation of an electrostatic interaction between the two processed polymers in all the developed chitosan/poly(γ-glutamic acid) hydrogels. The composition of the porous constructs as well as the employed processing techniques had a significant influence on the resulting swelling, thermal, and mechanical properties. In particular, the combination of the ionic interaction between chitosan/poly(γ-glutamic acid) and the defined internal microarchitecture of microstructured polyelectrolyte complex hydrogels provided a significant improvement of the compressive mechanical properties. Preliminary in vitro biological investigations revealed that microstructured polyelectrolyte complex hydrogels were suitable for the adhesion and proliferation of Balb/3T3 clone A31 mouse embryo fibroblasts. The encouraging results in terms of cytocompatibility and stability of the microstructure in aqueous solutions due to the ionic crosslinking suggest the investigation of the developed microstructured polyelectrolyte complex hydrogels as suitable scaffolds for three-dimensional cells’ culture.

This paper reports on the development of montmorillonite (MMT)-reinforced hydrogels, based on a peptidomimetic polyamidoamine carrying guanidine pendants (AGMA1), as substrates for the osteo-induction of osteoblast precursor cells. AGMA1 hydrogels of various degrees of crosslinking responded favourably to MMT reinforcement, giving rise to composite hydrogels with shear storage modulus G', when fully swollen in water, up to 200 kPa, i.e. 20 times higher than the virgin hydrogels and of the same order or higher than other hydrogel-based composites proposed for orthopaedic applications. This significant improvement was ascribed to the effective interpenetration between the polymer matrix and the inorganic filler. AGMA1-MMT hydrogels, when evaluated as scaffolds for the osteogenic differentiation of mouse calvaria-derived pre-osteoblastic MC3T3-E1 cells, proved able to support cell adhesion and proliferation and clearly induced differentiation towards the osteoblastic phenotype, as indicated by different markers. In addition, AGMA1-MMT hydrogels proved completely degradable in aqueous media at pH 7.4 and did not provide any evidence of cytotoxicity. The experimental evidence suggests that AGMA1-MMT composites definitely warrant potential as scaffolds for osteoblast culture and bone grafts. Copyright © 2016 John Wiley & Sons, Ltd.

Well-defined amphiphilic pentablock copolymers Siy-(EGx-FAz)2 composed of polysiloxane (Si), polyethylene glycol (EG), and perfluorohexylethyl polyacrylate (FA) blocks are synthesized by ATRP of FA monomer starting from a difunctional bromo-terminated macroinitiator. Diblock copolymers EGx-FAz are also synthesized as model systems. The block copolymers are used, either alone or blended with a PDMS matrix in varied loadings, to prepare antibiofouling coatings. Angle-resolved XPS and contact angle measurements show that the coating surface is highly enriched in fluorine content but undergoes reconstruction after contact with water. Protein adsorption experiments with human serum albumin and calf serum highlight that diblock copolymers resist protein adhesion better than do pentablock copolymers. Blending of the pentablock copolymer with PDMS results in increased protein adsorption. By contrast, the PDMS-matrix coatings show high removal percentages of sporelings of the green fouling alga Ulva linza. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015, 53, 1213–1225

A commercially available chitosan (CS) was employed in the formulation of nanoparticles loaded with lysozyme (LZ) as antimicrobial protein drug model. Due to the variability of commercially available batches of chitosans and to the strict dependence of their physical and biological properties to the molecular weight ( M w ) and deacetylation degree (DD) of the material, the CS was fully characterized resulting in weight-average molecular weight of 108,120 g/mol and DD of 92%. LZ-loaded nanoparticles (LZ-NPs) of 150 nm diameter were prepared by inotropic gelation. The nanoparticles were effectively preserving the antibacterial activity of the loaded enzyme, which was slowly released over 3 weeks in vitro and remained active toward Staphylococcus epidermidis up to 5 days of incubation. Beyond the intrinsic antibacterial activity of CS and LZ, the LZ-NPs evidenced a sustained antibacterial activity that resulted in about 2 log reduction of the number of viable S. epidermidis compared to plain CS nanoparticles . Furthermore, the LZ-NPs showed a full in vitro cytocompatibility toward murine fibroblasts and, in addition to the potential antimicrobial applications of the developed system, the proposed study could serve as an optimal model for development of CS nanoparticles carrying antimicrobial peptides for biomedical applications.

A wide range of poly(hydroxyalkanoate)s (PHAs), a class of biodegradable polyesters produced by various bacteria grown under unbalanced conditions, have been proposed for the fabrication of tissue-engineering scaffolds. In this study, the manufacture of poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] (or PHBHHx) scaffolds, by means of an additive manufacturing technique based on a computer-controlled wet-spinning system, was investigated. By optimizing the processing parameters, three-dimensional scaffolds with different internal architectures were fabricated, based on a layer-by-layer approach. The resulting scaffolds were characterized by scanning electron microscopy, which showed good control over the fibre alignment and a fully interconnected porous network, with porosity in the range 79–88%, fibre diameter 47–76 µm and pore size 123–789 µm. Moreover, the resulting fibres presented an internal porosity connected to the external fibre surface as a consequence of the phase-inversion process governing the solidification of the polymer solution. Scaffold compressive modulus and yield stress and strain could be varied in a certain range by changing the architectural parameters. Cell-culture experiments employing the MC3T3-E1 murine pre-osteoblast cell line showed good cell proliferation after 21 days of culture. The PHBHHx scaffolds demonstrated promising results in terms of cell differentiation towards an osteoblast phenotype. Copyright © 2014 John Wiley & Sons, Ltd.

A linear amphoteric poly(amidoamino acid), L-ARGO7, is prepared by Michael-type polyaddition of L-arginine with N,N'-methylenebisacrylamide. Chain-extension of acrylamide end-capped L-ARGO7 oligomers with piperazine leads to high-molecular-weight copolymers in which L-arginine maintains its absolute configuration. Acid/base properties of L-ARGO7 polymers show isolectric points of ≈ 10 and positive net average charges per repeating unit at pH = 7.4 from 0.25 to 0.40. These arginine-rich synthetic polymers possibly share some of the unique biological properties of polyarginine cell-permeating peptides. In vitro tests with mouse embryo fibroblasts balb/3T3 clone A31 show that L-ARGO7 polymers are endowed with effective cell internalization ability combined with minimal cytotoxicity.

Three-dimensional fibrous scaffolds made of a three-arm star poly(ε-caprolactone) were developed by employing a novel computer-aided wet-spinning apparatus to precisely control the deposition pattern of an extruded polymeric solution as a filament into a coagulation bath. Star poly(ε-caprolactone)/hydroxyapatite composite scaffolds composed of fibres with a porous morphology both in the outer surface and in the cross section were successfully produced with a layer-by-layer approach achieving good reproducibility of the internal architecture and external shape. Changes in processing parameters were used to fabricate scaffolds with different architectural parameters in terms of average pore size in the xy-axes (from 190 to 297 µm) and in the z-axis (from 54 to 126 µm) and porosity (in the range of 20%–60%). Based on the mechanical characterization, processing variations and hydroxyapatite loading have an influence on scaffold compression properties. Cell cultures, using a murine pre-osteoblast cell line, had good cell responses in terms of proliferation and osteoblastic differentiation. Thus, this technique appears to be an effective method for producing customized polymeric scaffolds for bone tissue engineering applications.

In the last decade, the melt-electrospinning technique has gained attention for the production of highly porous microfibrous tissue engineering scaffolds. The possibility of processing polymers without the use of organic solvents is one of the main advantages over solution electrospinning. In this study, computer-controlled melt-electrospinning of a commercial poly(??-caprolactone) and of two batches with different molecular weights of a three-arm star poly(??-caprolactone) by means of a screw-extruder-based additive manufacturing system is reported. Experimental parameters such as processing temperature, extrusion flow rate and applied voltage were studied and optimized in order to obtain non-woven meshes with uniform fibre morphology. Applying the optimized parameters, three-dimensional scaffolds were produced using a layer-by-layer approach (0?????????90?? lay-down pattern). ?? 2013 Society of Chemical Industry

Since the 1970s, various types of ceramic, glass and glass-ceramic materials have been proposed and used to replace damaged bone in many clinical applications. Among them, hydroxyapatite (HA) has been successfully employed thanks to its excellent biocompatibility. On the other hand, the bioactivity of HA and its reactivity with bone can be improved through the addition of proper amounts of bioactive glasses, thus obtaining HA-based composites. Unfortunately, high temperature treatments (1200°C÷1300°C) are usually required in order to sinter these systems, causing the bioactive glass to crystallize into a glass-ceramic and hence inhibiting the bioactivity of the resulting composite. In the present study novel HA-based composites are realized and discussed. The samples can be sintered at a relatively low temperature (800 °C), thanks to the employment of a new glass (BG_Ca) with a reduced tendency to crystallize compared to the widely used 45S5 Bioglass®. The rich glassy phase, which can be preserved during the thermal treatment, has excellent effects in terms of in vitro bioactivity; moreover, compared to composites based on 45S5 Bioglass® having the same HA/glass proportions, the samples based on BG_Ca displayed an earlier response in terms of cell proliferation.

An Additive Manufacturing technique for the fabrication of three-dimensional polymeric scaffolds, based on wet-spinning of poly(ε-caprolactone) (PCL) or PCL/hydroxyapatite (HA) solutions, was developed. The processing conditions to fabricate scaffolds with a layer-by-layer approach were optimized by studying their influence on fibres morphology and alignment. Two different scaffold architectures were designed and fabricated by tuning inter-fibre distance and fibres staggering. The developed scaffolds showed good reproducibility of the internal architecture characterized by highly porous, aligned fibres with an average diameter in the range 200-250 μm. Mechanical characterization showed that the architecture and HA loading influenced the scaffold compressive modulus and strength. Cell culture experiments employing MC3T3-E1 preosteoblast cell line showed good cell adhesion, proliferation, alkaline phosphatase activity and bone mineralization on the developed scaffolds.

Bioerodible polymers displaying both stealth and targeting properties for the preparation of nanosystems for targeted and controlled delivery of fibrinolytic drugs to the thrombus were prepared by straightforward synthetic routes and characterized. Poly[(maleic anhydride)-alt-(butylvinyl ether)]s were synthesized in the presence of dodecyl mercaptan as chain transfer agent allowing for the preparation of copolymers with tunable molecular weight. 2-Methoxyethanol hemiesters containing antiopsonizing molecules of poly(ethylene glycol) were prepared and further biofunctionalized with a Fab fragment by a two-step reaction. In vitro biocompatibility investigation of the prepared materials supported their suitability for biomedical applications.

Nowadays, the alarming rise in multidrug-resistant microorganisms urgently demands for suitable alternatives to current antibiotics. In this regard, antimicrobial peptides (AMPs) have received growing interest due to their broad spectrum of activities, potent antimicrobial properties, unique mechanisms of action and low tendency to induce resistance. However, their pharmaceutical development is hampered by potential toxicity, relatively low stability and manufacturing costs. In the present study, we tested the hypothesis that the encapsulation of the frog-skin derived AMP temporin B (TB) into chitosan nanoparticles (CS-NPs) could increase peptide’s antibacterial activity, while reducing its toxic potential. TB-loaded CS-NPs with good dimensional features were prepared, based on the ionotropic gelation between CS and sodium tripolyphosphate. The encapsulation efficiency of TB in the formulation was up to 75%. Release kinetic studies highlighted a linear release of the peptide from the nanocarrier, in the adopted experimental conditions. Interestingly, the encapsulation of TB in CS-NPs demonstrated to reduce significantly the peptide’s cytotoxicity against mammalian cells. Additionally, the nanocarrier evidenced a sustained antibacterial action against various strains of Staphylococcus epidermidis for at least 4 days, with up to 4-log reduction in the number of viable bacteria compared to plain CS-NPs at the end of the observational period. Of note, the antimicrobial evaluation tests demonstrated that while the intrinsic antimicrobial activity of CS ensured a “burst” effect, the gradual release of TB further reduced the viable bacterial count, preventing the regrowth of the residual cells and ensuring a long-lasting antibacterial effect. The developed nanocarrier is eligible for the administration of several AMPs of therapeutic interest with physical-chemical characteristics analogue to those of TB.

Presently, there is an increasing interest towards the composites of calcium phosphates, especially β-tricalcium phosphate (TCP), and bioactive glasses. In the present contribution, the recently developed BG_Ca/Mix glass has been used because its low tendency to crystallize allows to sinter the composites at relatively low temperature (i.e. 850°C), thus minimizing the glass devitrification and the interaction with TCP. A further improvement is the introduction of lab-produced TCP powders doped with specific ions instead of non-doped commercial powders, since the biological properties of materials for bone replacement can be modulated by doping them with certain metallic ions, such as Mg and Sr. Therefore, novel binary composites have been produced by sintering the BG_Ca/Mix glass with the addition of pure, Mg-substituted, Sr-substituted or Mg/Sr bisubstituted TCP powders. After an accurate characterization of the starting TCP powders and of the obtained samples, the composites have been used as three-dimensional supports for the culture of mouse calvaria-derived pre-osteoblastic cells. The samples supported cell adhesion and proliferation and induced promising mechanisms of differentiation towards an osteoblastic phenotype. In particular, the Mg/Sr bi-doped samples seemed to better promote the differentiation process thus suggesting a combined stimulatory effect of Mg(2+) and Sr(2+) ions.

Encapsulated Fe3O4 nanoparticles of average diameters d = 12 nm are obtained by coprecipitation, in the presence of 2-methoxyethanol hemiester of poly(maleic anhydride-alt-butyl vinyl ether) 5% grafted with poly(ethylene glycol) (VP-MAG nanoparticles). A complete characterization of nude and encapsulated nanoparticles through structural techniques (namely XRD, TEM, SEM), Raman spectroscopy and magnetic measurements has been performed. These nanoparticles compared with commercial compounds (ENDOREM (R)) present superparamagnetic behavior and nuclear relaxivities that make them promising as magnetic resonance imaging (MRI) contrast agents (CAs). We found that our nanostructures exhibit r(2) relaxivity higher than those of commercial CAs over the whole frequency range. The MRI efficiency of our samples was related to their microstructural and magnetic properties.

Polymeric fibrous scaffolds based on the biocompatible and biodegradable three-arm-branched star poly(ε-caprolactone) (Mw = 189,000 g/mol) were prepared by a melt electrospinning technique. The possibility of processing polymers without the use of organic solvents is one of the main advantages over solution electrospinning. Scaffolds were biologically tested for their ability of supporting skin tissue regeneration. For this purpose, mouse embryo fibroblast (BALB/3T3 clone A31) and human keratinocyte (HaCaT) cell lines were selected as models, and seeded onto the polymeric supports both as single and co-culture. Cell viability, proliferation, and collagen production were assessed by WST-1 assay and Direct Red 80 dye, respectively. Cell morphology and colonization of the supports were evaluated by scanning electron microscopy and confocal laser scanning microscopy. Results highlighted that the star poly(ε-caprolactone) scaffolds were able to promote collagen production by fibroblasts. In co-culture studies, scaffolds supported adhesion, proliferation, and spatial organization of both cell lines. By virtue of the observed results, the developed polymeric scaffolds appeared suitable as biodegradable and biocompatible three-dimensional supports for skin tissue regeneration in wound healing dressing.

A new protocol, based on a modified replication method, is proposed to obtain bioactive glass scaffolds. The main feature of these samples, named "shell scaffolds", is their external surface that, like a compact and porous shell, provides both high permeability to fluids and mechanical support. In this work, two different scaffolds were prepared using the following slurry components: 59 % water, 29 % 45S5 Bioglass(®) and 12 % polyvinylic binder and 51 % water, 34 % 45S5 Bioglass(®), 10 % polyvinylic binder and 5 % polyethylene. All the proposed samples were characterized by a widespread microporosity and an interconnected macroporosity, with a total porosity of 80 % vol. After immersion in a simulated body fluid (SBF), the scaffolds showed strong ability to develop hydroxyapatite, enhanced by the high specific surface of the porous systems. Moreover preliminary biological evaluations suggested a promising role of the shell scaffolds for applications in bone tissue regeneration. As regards the mechanical behaviour, the shell scaffolds could be easily handled without damages, due to their resistant external surface. More specifically, they possessed suitable mechanical properties for bone regeneration, as proved by compression tests performed before and after immersion in SBF.

Since it was introduced at the end of the ‘60s, the 45S5 Bioglass ® has played a fundamental role among the materials for orthopedic applications because of its ability to build a stable bond with the surrounding bone. The recent development of bone tissue engineering has led the interest of many scientists in the design of Bioglass ® -based scaffolds, i.e. porous systems able to drive and foster the bone tissue regrowth. Among the available techniques to realize scaffolds, the polymer burning out method, which employs organic particles as pore generating agents in a ceramic matrix, combines versatility and low cost. In spite of the advantages of the polymer burning out method, this technique has been rarely applied to 45S5 Bioglass ® and a systematic feasibility study has not been carried out on this issue yet. In order to fill this gap, in the present contribution the polymer burning out method was employed to design macroporous scaffolds based on 45S5 Bioglass ® . Different amounts of organic phase were used to obtain samples with different porosity. The samples were characterized from a microstructural point of view, in order to evaluate the pore morphology, dimension and degree of interconnectivity. Such findings proved that a proper setting of the processing parameters made it possible to achieve very high porosity values, among the best ones obtained in the literature with the same technique, together with an appreciable mechanical behaviour, according to compression tests. Finally, the scaffolds bioactivity was assessed by means of in vitro tests in a simulated body fluid (SBF) solution. Moreover, in the view of a potential application for bone tissue engineering, a preliminary biological evaluation of the obtained scaffolds to sustain cell proliferation was carried out.

The goal of present work was to investigate the use of bioerodible polymeric nanoparticles as carriers of retinoic acid (RA), which is known to induce differentiation of several cell lines into neurons. A novel method, named “Colloidal-Coating”, has been developed for the preparation of nanoparticles based on a copolymer of maleic anhydride and butyl vinyl ether (VAM41) loaded with RA. Nanoparticles with an average diameter size of 70 nm and good morphology were prepared. The activity of the encapsulated RA was evaluated on SK-N-SH human neuroblastoma cells, which are known to undergo inhibition of proliferation and neuronal differentiation upon treatment with RA. The activity of RA was not affected by the encapsulation and purification processes.

Bioerodible polymers displaying both stealth and targeting properties for the preparation of nanosystems for targeted and controlled delivery of fibrinolytic drugs to the thrombus were prepared by straightforward synthetic routes and characterized. Poly[(maleic anhydride)-alt-(butylvinyl ether)]s were synthesized in the presence of dodecyl mercaptan as chain transfer agent allowing for the preparation of copolymers with tunable molecular weight. 2-Methoxyethanol hemiesters containing antiopsonizing molecules of poly(ethylene glycol) were prepared and further biofunctionalized with a Fab fragment by a two-step reaction. In vitro biocompatibility investigation of the prepared materials supported their suitability for biomedical applications.