Search

In the present work, hybrid nanocomposites of an epoxy resin reinforced with ZnTiO3 and BaTiO3 nanoparticles, at various filler contents, were fabricated and studied. The successful integration of ceramic nanofillers and the fine distribution of nanoparticles were confirmed via X-ray Diffraction patterns and Scanning Electron Microscopy images, respectively. Dielectric properties and related relaxation phenomena were investigated via Broadband Dielectric Spectroscopy in a wide range of frequencies and temperatures. Data analysis showed that dielectric permittivity increases with filler content, although optimum performance does not correspond to the maximum ZnTiO3 content. Four relaxation processes were observed and attributed to interfacial polarization (IP) (at low frequencies and high temperatures), glass-to-rubber transition (α-relaxation) of the epoxy matrix (at intermediate frequencies and temperatures), and local rearrangements of polar side groups of the macromolecules (β-relaxation) and small flexible groups of the main polymer chain (γ-relaxation) occurring at low temperatures and high frequencies. The ability of hybrid nanocomposites to store and retrieve energy was studied under dc conditions by employing a charging/discharging sequence. The stored and retrieved energy increases with filler content and charging voltage. The optimum ability of energy recovering, shown by the epoxy/7 phr ZnTiO3/7 phr BaTiO3 nanocomposite, ranges between 30 and 50 times more than the matrix, depending on the time instant. The employed nanoparticles induce piezoelectric properties in the nanocomposites, as found by the increase in the piezoelectric coefficient with filler content. [ABSTRACT FROM AUTHOR]

Polymer matrix nanocomposites are widely studied because of the versatility of their physical and mechanical properties. When these properties are present simultaneously, responding at relative stimuli, multifunctional performance is achieved. In this study, hybrid nanocomposites of SrFe12O19 and BaTiO3 ceramic particles dispersed in an epoxy resin matrix were fabricated and characterized. The content of SrFe12O19 was varying, while the amount of BaTiO3 was kept constant. The successful fabrication of the nanocomposites and the fine dispersion of the ceramic particles was verified via the morphological and structural characterization carried out with X-ray Diffraction patterns and Scanning Electron Microscopy images. Dielectric response and related relaxation phenomena were studied by means of Broadband Dielectric Spectroscopy. Dielectric permittivity augments with filler content, while the recorded relaxations, with descending relaxation time, are: (i) interfacial polarization, (ii) glass-to-rubber transition, (iii) intermediate dipolar effect, and (iv) re-orientation of polar-side groups of the main polymer chain. SrFe12O19 nanoparticles induce magnetic properties to the nanocomposites, which alter with the magnetic filler content. Static and dynamic mechanical response improves with filler content. Thermogravimetric analysis shown that ceramic particles are beneficial to the nanocomposites' thermal stability. Glass transition temperature, determined via Differential Scanning Calorimetry, was found to slightly vary with filler content, in accordance with the results from dynamic mechanical and dielectric analysis, indicating the effect of interactions occurring between the constituents. Examined systems are suitable for energy storing/retrieving. [ABSTRACT FROM AUTHOR]

In this study, hybrid nanocomposites consisting of Fe3O4/BaTiO3/epoxy resin were prepared with varying amounts of filer content. Structural and morphological characterization, conducted via X-Ray Diffraction patterns and Scanning Electron Microscopy images, revealed the successful fabrication of composites and fine dispersion of inclusions. Thermomechanical properties are studied via Differential Scanning Calorimetry, Thermogravimetric Analysis, Dynamic Mechanical Analysis and static mechanical tests. Hybrid composites exhibit enhanced thermal stability and improved mechanical response. Indicatively, Young's modulus, tensile strength and fracture toughness increase from 1.26 GPa, 22.25 MPa, and 3.03 kJ/m3 for the neat epoxy to 1.39 GPa, 45.73 MPa, and 41.08 kJ/m3 for the composites with 20 or 15 parts per hundred resin per mass (phr) of Fe3O4, respectively. Electrical behavior is investigated via Broadband Dielectric Spectroscopy and ac conductivity measurements. The real part of dielectric permittivity reaches the value of 11.11 at 30 °C for the composite with 40 phr of Fe3O4. The ability to store and retrieve electric energy on the nanocomposites is examined with the following parameters: the filler content and the applied voltage under dc conditions. Retrieved energy reaches 79.23% of the stored one, for the system with 15 phr of Fe3O4. Magnetic response is studied via a Vibrating Sample Magnetometer. Magnetic saturation, for the system with the highest magnetic filler content, obtains the value of 25.38 Am2/kg, while pure magnetic powder attains the value of 86.75 Am2/kg. Finally, the multifunctional performance of the nanocomposites is assessed regarding all the exerted stimuli and the optimum behavior is discussed. [ABSTRACT FROM AUTHOR]