Search

Unlabelled: Osteolysis secondary to polyethylene wear is one of the major factors limiting long-term performance of TKA. Oxidized zirconium is a new material that combines the strength of a metal with the wear properties of a ceramic. It remains unknown whether implants with a zirconium femoral component can be used safely in TKA. To answer that question, we reviewed, at a minimum of 5 years, the clinical outcome and survivorship of a ceramic-surfaced oxidized zirconium femoral component implanted during 98 primary TKAs between April 2001 and December 2003. Survivorship was 98.7% at 7 years postoperatively. No revision was necessary and only one component failed because of aseptic loosening. Mean Knee Society score improved from 36 to 89. No adverse events were observed clinically or radiologically. These results justify pursuing the use of oxidized zirconium as an alternative bearing surface for a femoral component in TKA.Level Of Evidence: Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence. [ABSTRACT FROM AUTHOR]

An abstract of the paper "Human Mesenchymal Stem Cells: Isolation and Concentration From Bone Marrow Using the Regenkit Device," by S. Ciuffi et al. is presented.

Background: We created a multicenter survey for Italian orthopedic surgeons on how they approach leg length discrepancy (LLD) when dealing with primary total hip arthroplasty. Aim of the study was to show how surgeons manage LLD and follow the literature recommendations during clinical practice., Methods: The survey was composed of 25 questions divided into four sections: 1-surgeon's profile, 2-preoperative and 3-intraoperative evaluation, and 4-postoperative management. In this paper, we report results to answer Sects. 1 and 2. Absolute and relative frequencies of answers to Sects. 2 and 3 are reported. We divided the participants in subgroups based on the "surgeon's profile" and evaluated difference in the answers given., Results: Absolute and relative frequencies demonstrate low agreement among participants in all phases of LLD management. We demonstrated a statistically significant difference based on the surgeon's profile regarding these questions: radiographic measure of LLD depending on working experience, p = 0.008; digital planning based on surgeons' age, p < 0.001, and workplace, p = 0.026; intraoperative anatomical landmarks based on numbers of procedures per year, p = 0.020; and use of intraoperative X-rays based on working experience, p = 0.002., Conclusions: LLD is a debated topic with no definitive recommendations. Many decisions still depend on tradition and surgeons' preference., (© 2024. The Author(s).)

Revision anterior cruciate ligament reconstruction (ACLR) is a challenging surgery occurring in 3 to 24% of primary reconstructions. A meticulous planning to study the precise size and location of both femoral and tibial bone tunnels is mandatory. The aim of the study was to evaluate the intra- and interoperator differences in the decision-making process between experienced surgeons after they were asked to make preoperative planning for ACL revision reconstruction with the use of both the computed tomography (CT) scan and a three-dimensional (3D)-printed model of the knee. Data collected from 23 consecutive patients undergoing revision of ACLR for graft failure at a single institute between September 2018 and February 2020 were prospectively reviewed. The double-blinded collected data were presented to three board-certificate attending surgeons. Surgeons were asked to decide whether to perform one-stage or two-stage revision ACLR based on the evaluation of the CT scan images and the 3D-printed custom-made models at two different rounds, T0 and T1, respectively, 7 days apart one from the other. Interoperator consensus following technical mistake was 52% at T0 and 56% at T1 using the CT scans, meanwhile concordance was 95% at T0 and 94% at T1 using the 3D models. Concordance between surgeons following new knee injury was 66% at T0 and 70% at T1 using CT scans, while concordance was 96% both at T0 and T1 using 3D models. Intraoperative variability using 3D models was extremely low: concordance at T0 and T1 was 98%. McNemar test showed a statistical significance in the use of 3D model for preoperative planning ( p  < 0.005). 3D-printed model reliability resulted to be higher compared with CT as intraoperator surgery technique selection was not modified throughout time from T0 to T1 ( p  < 0.005). The use of 3D-printed models had the most impact when evaluating femoral and tibial tunnels, resulting to be a useful instrument during preoperative planning of revision ACLR between attending surgeons with medium-high workflow., Competing Interests: None declared., (Thieme. All rights reserved.)

Background: Tibiofemoral components rotational congruency affects the total knee arthroplasty (TKA) success. The smart insert sensor (I-S) helps to establish tibial component rotation reciprocally to a fixed femoral rotation. We aimed (1) to validate the use of I-S as a possible tool to reach reproducible reciprocal femorotibial rotation (RftR) in TKA independently from anatomic landmarks, reducing outliers in combined and mismatched femorotibial rotation (CftR and MMftR, respectively) positioning and (2) to validate the "curve-on-curve" method for a specific type of asymmetrical tibial component., Methods: From February 2018, we conducted a prospective case-control study including 106 patients undergoing TKA. Patients were divided into 2 groups based on the method used to establish tibial component rotation: with the I-S use (group A, n = 53) and with the standard "curve-on-curve" technique (group B, n = 53). Rotational alignment was calculated using the Berger protocol with postoperative computed tomography scanning. Alignment parameters measured were tibial and femoral component rotations (tR, fR), the CftR, the MMftR, and the RftR., Results: Intraoperative rotation measured by I-S correlated the best with RftR (r = 0.84; P < .001) at the post-operative CT scanning. No significant differences were found between groups A and B regarding all types of rotation (fR: P  = .774; tR: P  = .467; CftR: P  = .847) except for MMftR ( P  = .036) and RftR ( P  = .023). There were no outliers in group A but 27 and 12 outliers in group B for MMftR and CftR respectively ( P < .001; P  = .032)., Conclusions: The TKA components' rotation established using a smart I-S intraoperatively is ascribable to the RftR at postoperative computed tomography scan. The I-S helps reduce outliers in the CftR and MMftR. An asymmetrical tibial base plate implanted using the curve-on-curve technique does not create a neutral reciprocal femorotibial rotation significantly increasing the number of cases with mismatched femorotibial internal rotation., (© 2024 The Authors.)

Objectives: Three-dimensional (3D) planning and Patient Specific Instrumentation (PSI) can help the surgeon to obtain more predictable results in Medial Opening Wedge High Tibial Osteotomy (mOW-HTO) than the conventional techniques. We compared the accuracy of the PSI and standard techniques and measured the learning curve for surgery time and number of fluoroscopic shots., Methods: We included the first 12 consecutive cases of mOW-HTO performed with 3D planning and PSI cutting guides and the first 12 non-supervised mOW-HTO performed with the standard technique. We recorded surgery time and fluoroscopic time. We calculated the variation (Δ delta) between the planned target and the postoperative result for Hip Knee Ankle Angle (HKA), mechanical medial Proximal Tibia Angle (MPTA), Joint Line Convergence Angle (JLCA) and tibial slope (TS) and compared it both groups. We also recorded the complication rate. We then calculated the learning curves for surgery time, number of fluoroscopic shots, Δ from target in both groups. CUSUM analysis charts for learning curves were applied between the two groups., Results: Mean surgical time and mean number of fluoroscopic shots were lower in PSI group (48.58±7.87 vs. 58.75±6.86 min; p=0.034 and 10.75±3.93 vs. 18.16±4.93 shots; p<0.001). The postoperative ΔHKA was 0.42±0.51° in PSI vs. 1.25±0.87° in conventional, p=0.005. ΔMPTA was 0.50±0.67° in PSI vs. 3.75±1.48° in conventional, p<0.001; ΔTS was 1.00±0.82° in PSI vs. 3.50±1.57° in conventional, p<0.001. ΔJLCA was 1.83±1.11° in PSI vs. 4±1.41° in conventional, p<0.001. The CUSUM analysis favoured PSI group regarding surgery time (p=0.034) and number of shots (p<0.001) with no learning curve effect for ΔHKA, ΔMPTA, ΔJLCA and ΔTS., Conclusions: PSI cutting guides and 3D planning for HTO are effective in reducing the learning curves for operation time and number of fluoroscopic shots. Accuracy of the procedure has been elevated since the first cases., Competing Interests: Competing interests: The authors state no conflict of interest., (© 2024 the author(s), published by De Gruyter, Berlin/Boston.)

Posterior lateral meniscal root (PLMR) tears are commonly observed in conjunction with anterior cruciate ligament (ACL) injuries. The presence of PLMR tears exacerbates knee instability, increasing stress on ACL grafts and accelerating joint degeneration if left untreated. Anatomical repair of PLMR tears is therefore crucial for restoring native knee kinematics and reducing tibiofemoral contact pressures, thereby safeguarding the ACL graft. However, the standard use of a single medial tunnel approach for concomitant PLMR and revision ACL reconstruction may require reconsideration to prevent the potential risks of tunnel overlapping, which could undermine graft anatomical integrity. This article, to prevent the risk of tunnel overlapping, introduces a surgical approach that employs an additional lateral tibial tunnel for PLMR repair, instead of the typically used single medial one, for PLMR repair during simultaneous revision ACL reconstruction., Competing Interests: All authors (F.M., Z.A.T., A.C., A.D.M., J.C., R.C.) declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Case: This report describes a new pattern of meniscal tear in an 18-year-old man after a knee sprain; he had undergone anterior cruciate ligament revision (ACL-R) 3 years earlier. He was diagnosed with an anterior cruciate ligament (ACL) graft rupture, a ramp lesion (Thaunat type 4), and a posterior root avulsion fracture of the medial meniscus (MM) (LaPrade type 5). He was treated successfully with an all-inside repair of the ramp lesion, a transtibial pull-out repair of the root tear, and ACL graft revision and anterolateral stabilization., Conclusion: This specific meniscal injury pattern should be recognized and documented, potentially warranting consideration as a new addition to Thaunat and LaPrade classifications as type 6., Competing Interests: Disclosure: The Disclosure of Potential Conflicts of Interest forms are provided with the online version of the article (http://links.lww.com/JBJSCC/C322)., (Copyright © 2024 The Authors. Published by The Journal of Bone and Joint Surgery, Incorporated. All rights reserved.)

Purpose: The aim of this study was to evaluate the relationship between the Löwenstein Lateral view and the True Lateral view for the positioning of the cephalic hip screw, through a cadaveric study., Materials and Methods: We placed two Kirschner wires in eight femur specimens using an Antero-Posterior view, Löwenstein Lateral view and True Lateral view. The distances between the Kirschner wires and the anterior, posterior, superior and inferior cortex were measured in all projections. The head of the femur was then sectioned, and the same macroscopic distances were measured. Finally, we could calculate the accuracy of the two radiographic lateral projections., Results: When the Kirschner wire was placed in the center of the head using the Antero-Posterior and the True Lateral view, the accuracy of Antero-Posterior view was 0.9705 while the accuracy of True Lateral view and Löwenstein Lateral view was 1.1479 and 1.1584, respectively. When the Kirschner wire was placed superior on the Antero-Posterior and centrally on the True Lateral view, the accuracy of Antero-Posterior view was 0.9930 while the accuracy of True Lateral view and Löwenstein Lateral view was 1.1159 and 0.7224, respectively., Conclusion: When the Kirschner wire was positioned proximal in Antero-Posterior view and central in True Lateral view, only the True Lateral view showed high accuracy., (© 2023. The Author(s).)

Revision of anterior cruciate ligament reconstruction (ACL-R) presents many challenges that are not encountered in the primary setting and, therefore, requires thorough preoperative planning. Recently, there has been growing evidence showing that combining the anterolateral ligament (ALL) reconstruction with ACL-R revision reduces the risk of postoperative ACL rupture and meniscal tears, and therefore, the ALL reconstruction becomes essential to a complex ACL revision. The technique that we describe is mainly used in the setting of complex ACL revision with extensive tunnel osteolysis associated with rotational instability of the knee. This article presents a technique for a one-stage complex ACL-R revision combined with ALL reconstruction using an Achilles tendon allograft with a bone plug., Competing Interests: The authors report no conflicts of interest in the authorship and publication of this article. Full ICMJE author disclosure forms are available for this article online, as supplementary material., (© 2023 The Authors.)

Posterior cruciate ligament ruptures account for nearly 20% of knee ligament lesions. These may be either isolated or occur as part of multiligament injuries. In most of the cases, conservative treatment is recommended, but when operative treatment is required, this is technically demanding. Several posterior cruciate ligament reconstructive techniques have been described, but some concerns still remain regarding graft choice, tunnels position, visualization of the posterior compartment and graft fixation. We describe an arthroscopic all-inside technique using a single-bundle autologous quadriceps tendon with patellar bone block., (© 2023 The Authors.)

Introduction: Total hip arthroplasty (THA) performed for femoral neck fractures (FNFs) is becoming a more frequent treatment in the active elderly population. Since there is limited research available presenting clinical outcomes after THA using the anterior-based muscle sparing (ABMS) approach, the aim of this study was to compare this surgical approach to the direct lateral (DL) approach in patients treated by THA for FNFs., Materials and Methods: We retrospectively reviewed the data prospectively collected as a part of our "Hip Fracture Unit" and included 163 patients who underwent THA from January 2016 to January 2019 for acute displaced FNFs., Results: A total of 132 patients who completed a minimum 2-years follow up (69 in the ABMS group and 63 in DL group) were included. The ABMS group demonstrated significantly shorter time to reach milestone for hospital discharge (1.5 Days vs 2.1 days, P = .018), while no statistically significant differences were detected in peri-operative complications. At 3 months, the timed up and go test, the Harris Hip Score (HHS) and the Oxford ip Score (OHS) were significantly better ( P = .024, .032 and .034, respectively) in the ABMS group compared to the DL group. No differences were found in functional outcomes (HHS and OHS) nor in complication rate at 6, 12 and 24 months., Discussion: This is one of the first studies to analyze functional results of THA performed for FNFs through an ABMS approach. Results are in line with those already present in the Literature., Conclusion: ABMS approach allows earlier mobilization and better early functional outcomes, compared to DL approach, in patients undergoing THA for acute displaced FNF. No differences are found after 6 months in functional results and complications rate., Competing Interests: The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article., (© The Author(s) 2023.)

Purpose: Robotic-assisted surgery has been recently introduced to improve biomechanical restoration, and thus better clinical and functional outcomes, after knee joint arthroplasty operations. Robotic-assisted uni-compartmental knee arthroplasty (UKA) aims indeed to improve surgical bone resection and alignment accuracy, optimized component positioning and knee balancing, relying on a series of calibration measurements performed during the surgery. These advantages focus therefore on improving the reproducibility of UKA surgeries, reducing (if not eliminating) eventual differences among high- and low-volume surgeons. The purpose of this study is to investigate and quantify the reproducibility of in-vivo measurements performed with a robotic system: the intra- and inter-observer variability of a series of measurements was therefore analyzed and compared among differently experienced operators., Methods: Five patients were analyzed and underwent robotic-assisted UKA using a semi-active robotic system. Three different observers with different experience levels were involved to independently perform the measurements of two parameters of the preoperative knee (Hip-Knee-Ankle angle [HKAa], Internal-External Rotation) at different degrees of knee flexion. Inter-observer and intra-observer comparisons were performed., Results: The average variability in the measurements obtained from the intra-observer and inter-observer comparisons were always < 0.68° for HKAa and < 2.59° for internal-external rotation, and the ICCs showed excellent agreement (> 0.75) for most cases and good agreement (> 0.60) in the remaining ones., Conclusion: This study demonstrated high reproducibility of the measurements obtainable in clinical environment with the robotic system. The inter-observer results furthermore showed that the level of confidence with the robotic system is not significantly influencing the measurement., (© 2023. The Author(s).)

Background: The synovial chondromatosis is an uncommon proliferative metaplastic process of the synovial cells that can develop in any synovial joint. An isolated primary chondromatosis of the posterior compartment of the knee is uncommon and few cases are reported in literature. Our purpose is to describe a rare case of primary chondromatosis of the knee posterior compartment and report the arthroscopic loose bodies excision through a difficult posteromedial portal, avoiding the use of the accessory posterior portal, most commonly reported for approaching this disease., Case Presentation: We report a rare case of a 35-year-old Caucasian male patient with diagnosis of chondromatosis of the posterior knee compartment. The radiographs showed multiple loose bodies of the posterior compartment. The MRI revealed minimal synovial hypertrophy areas, multiple osteophytes in the intercondylar notch, and loose bodies in the posteromedial compartment. The CT allowed us to assess the bony structures, the morphology of the intercondylar notch, and the presence osteophytes of the medial and lateral femoral condyles. The CT images were crucial to plan how to reach the posterior compartments of the knee through a trans-notch passage. The patient underwent arthroscopic surgery using anteromedial, anterolateral, and posteromedial portals. The tunneling through the intercondylar osteophytes was performed to allow the arthroscope to pass trans-notch. To avoid additional accessory posterior portals, we used a 70° arthroscope to better explore the posterior knee compartment. The cartilage-like bodies were removed and synovectomy of the inflamed areas was performed. The clinical and radiological follow-up was 12 months and the patient showed excellent clinical outcomes, returning to his activities of daily living and sport activity., Conclusion: Our case report highlights the importance of the arthroscopic approach to treat synovial chondromatosis, despite the involvement of the posterior compartment of the knee. An optimal preoperative imaging allows to plan for the proper surgical procedure even in patients with severe osteoarthritis. Moreover, the adoption of an intercondylar notch tunneling and a 70° arthroscope can help surgeons to better explore the posterior knee compartment, avoiding an accessory posterior trans-septal portal. Therefore, a synovectomy of the inflamed foci may be useful to prevent recurrence., (© 2022. The Author(s).)

Robotic-assisted medial unicompartmental knee arthroplasty (mUKA) has been introduced to improve accuracy in implant positioning and limb alignment, overcoming the reported high failure rates of conventional UKA. Indeed, mUKA is a technically challenging procedure strongly related to surgeons' skills and expertise. The purpose of this study was to evaluate the likelihood of robotic-assisted surgery in reducing the variability of coronal and sagittal component positioning between high- and low-volume surgeons. We evaluated a prospective cohort of 161 robotic mUKA implanted between May 2018 and December 2019 at two high-volume robotic centers. Patients were divided into two groups: patients operated by "high-volume" (group A) or "low-volume" (group B) surgeons. We recorded intraoperative lower-limb alignment, component positioning, and surgical timing. Postoperatively, every patient underwent a radiographical protocol to assess coronal and sagittal femoral/tibial component alignment. Range of motion and other clinical outcomes were assessed pre- and 12 months postoperatively by using oxford knee score, forgotten joint score, and visual analog scale. Of 161 recruited knees, 149 (A: 101; B: 48) were available for radiographic analysis at 1 month, and clinical evaluation at 12 months. No clinical difference neither difference in mechanical alignment nor coronal/sagittal component positioning were found ( p  > 0.05). A significant difference was recorded in surgical timing (A: 57 minutes; B: 86 minutes; p  < 0.05). No superficial or deep infections or other major complications have been developed during the follow-up. Robotics surgery in mUKA confirmed its value in improving the reproducibility of such technical procedure, with satisfactory clinical outcomes. Moreover, it almost eliminates any possible differences in component positioning, and lower limb alignment among low-and high- volume knee surgeons., Competing Interests: None declared., (Thieme. All rights reserved.)

Background: Revision ACL reconstruction is a complex topic with many controversies and not-easy-to-make decisions. The authors' aim is to provide some feasible advice that can be applied in daily clinical practice with the goal of facilitating the decision-making process and improving the outcomes of patients subjected to revision ACL reconstruction., Methods: A national survey with seven questions about the most controversial topics in revision ACL reconstruction was emailed to members of two societies: SIOT and SIAGASCOT. The participants' answers were collected, the most recent literature was analyzed, and a consensus was created by the authors, according to their long-term surgical experience., Conclusions: The decision-making process in revision ACL reconstruction starts with a standardized imaging protocol (weight-bearing radiographs, CT scan, and MRI). One-stage surgery is indicated in almost all cases (exceptions are severe tunnel enlargement and infection), while the choice of graft depends on the previously used graft and the dimensions of the tunnels, with better clinical outcomes obtained for autografts. Additional procedures such as lateral extra-articular tenodesis in high-grade pivot-shift knees, biplanar HTO in the case of severe coronal malalignment, and meniscal suture improve the clinical outcome and should be considered case by case., Level of Evidence: V (Expert opinion)., (© 2022. The Author(s).)

The aim of this study is to evaluate how the spread of Sars-Cov-2 has changed the epidemiology of proximal femur fractures in two major trauma centers in Italy, understanding the workload and the best allocation of the resources for the orthopedics department in such an emergency situation. The rate of patients from January 2019 to April 2020 hospitalized with femoral neck fractures (group A) and trochanteric fractures (group B) were recorded. Demographic data, timing of surgical treatment and the length of stay were recorded. Data show that the number of proximal femur fractures has remained unchanged in the COVID and pre-COVID era (ranging from an average of 91.14/month in the pre-COVID era to 76/month in March and 80/month in April). In our trauma centers, the rate of patients operated on within 48 hours has remained stable (78.19% vs 77.92%), while the length of stay has decreased during the COVID period (8.9 days vs 6.5 days in March and 6.8 days in April). Proximal femur fractures, even during the COVID period, are a constant issue and a new challenge for the healthcare system. The main goals of management are to preserve patients from viral infection, to provide early surgical treatment and fast track protocol for discharge.

Background: The use of proximal femoral replacements (PFR) has been recently described for catastrophic internal fixation failures. PFR is an attractive treatment option because it is technically straightforward and allows for immediate mobilization of the patient. The aim of the study was to determine the survivorship, functional outcome and complications' rate in a group of elderly patients who underwent proximal femoral replacement as a salvage treatment after femur cephalomedullary nails' mechanical failures., Methods: We evaluated 21 patients who underwent salvage of a failed cephalomedullary nail by using a single design PFR at our institution between 2014-2017. A cemented stem was used in all cases. Radiographs were assessed for fractures, sign of loosening, presence of heterotopic ossification and leg length discrepancy. Functional evaluation was performed through Harris Hip Score (HHS), FIM™ and Time Up and Go test (TUG). Kaplan-Meier estimator was used to determine the overall implants' survival., Results: The average age at the time of surgery was 83years. The mean follow-up was 3.1years. We recorded 3 dislocations of which 2 required a revision. No case of septic or aseptic failure was reported. Two patients died respectively at 11 and 14 months after surgery. At the last follow-up the mean HHS, FIM™, and the TUG improved significantly (p<0.05)., Conclusion: Immediate weight bearing, good functional outcomes, low complications' and one-year mortality rate make the proximal femur replacement with megaprostheses a potential first line treatment of intertrochanteric/subtrochanteric fixations' failures among elderly, osteoporotic, frail patients. Dislocation is the most common complication to bear in mind within the first six months after surgery., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Background: Anterior cruciate ligament reconstruction (ACLR) with cortical fixation adjustable-loop devices are associated with high potential risk of button malpositioning or interposition of the soft tissue between lateral femoral cortex and the button. Surgeons usually use X-rays to check and avoid button malposition and soft tissue interposition. Arthroscopic visualization of button position through the lateral gutter has been described. With this technique, it is possible for identification and correction of femoral button malalignment in the setting of soft tissue interposition and it could avoid the use of post-operative X-ray., Methods: A total of 193 ACLR were included and patients were randomized into two groups. The first series (Group A) of 112 patients who sustained an ACLR with post-operative X-ray to assess the position of the femoral button and the second series (Group B) of 81 patients who sustained an ACLR with an arthroscopic exploration of the button followed by post-operative X-ray., Results: On the post-operative radiographs, tissue interposition between the button and femoral cortex was found in nine cases of 112 in Group A (8%) and in zero case of 81 in Group B (0%). In six cases (7,4%) in Group B, there was a soft tissue interposition between the button and femoral cortex as visualized by arthroscopic confirmation and before post-operative X-ray; in all these cases, the soft tissue was removed, and the button was in contact with the bone in all X-ray made in the Group B., Conclusions: This technique allows for identification and correction of femoral button malalignment in the setting of soft tissue interposition and reduces the use of post-operative X-ray.

The purpose of this article was to analyze clinical and functional results after medial patellofemoral ligament (MPFL) reconstruction and to establish if a computer-assisted physical test battery could determine a "safe timing" to return to sport. We hypothesized that "time-based" criteria to declare safe return to sport could not be reliable to predict functional recover. Fifty-eight young athletic patients were selected after isolated reconstruction of MPFL. The minimum follow-up was 8 months. All the patients were evaluated subjectively with Kujala and Short Form 36 (SF-36) scores and objectively through a standardized computer-assisted physical battery of seven tests (Back in Action, Corehab). No patient was lost at the end point of follow-up and no recurrence of patellar dislocation was reported. At 8 months, 31 patients (53.4%) returned to sport at preoperative levels, and 23 (39.6%) participated in sports at lower levels. The subjective evaluation reported an increase of Kujala (60-92.7) and SF-36 score (28.6/25.4-52.2/53.6). At computer-assisted objective assessment, only 23 patients (39.6%) fulfilled the criteria for safe return to sport, while 31 (53.4%) got an insufficient outcome and 4 (6.9%) failed to complete the test. From our data, clinical scores after MPFL reconstruction provide only little insight into return to sport. The introduction of a computer-assisted objective analysis in the decision-making process for proper return to sport is necessary to evaluate functional recovery and dynamic knee stability., Competing Interests: None declared., (Thieme. All rights reserved.)

Purpose: The Watson-Jones interval plane between tensor fascia lata (TFL) and the gluteus medius (GM) has come back into fashion in the past few years - Röttinger described the anterolateral minimal invasive approach (ALMI) for use in total hip replacement, in which the standard Watson-Jones interval was used, but with a completely intermuscular plane. However, the term anterolateral is often still utilised to describe intramuscular approaches in which the GM was violated, thus creating a potential misunderstanding in the literature. Accordingly, we have designed a study to answer the following questions: (1) are there articles in the recent literature that use the term "anterolateral" to describe different approaches; (2) which would be the correct description of the anterolateral approach?, Methods: We did a systematic review of the literature based on PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines, to look for peer reviewed papers of any evidence level focusing on the definition of anterolateral approach; MEDLINE and EMBASE were searched., Results: 73 manuscripts met the criteria of the systematic search. 53 papers (72.6%) reported the term anterolateral approach to describe a complete intermuscular approach between the interval between GM and TFL. Nonetheless, in the remaining 20 papers (27.4%) the term anterolateral was used to describe intramuscular approaches in which the gluteus medius was violated., Conclusion: In about 1 out of 4 papers in the recent literature, the term anterolateral was utilised to describe approaches that are completely different both in terms of anatomy and function.

Background: Semi-active robot-assisted total hip arthroplasty (THA) has two options to measure the leg length discrepancy (LLD) and combined offset (CO), the 'enhanced' femoral workflow and the so-called 'express' simplified workflow. The purpose of this study was to determine the precision and accuracy of intraoperative LLD and CO measurement with express workflow robotic THA., Methods: Between February 2018 and December 2019, 30 patients underwent an express workflow robot-assisted primary THA for intraoperative LLD and CO measurements. Postoperative radiographs were used for LLD and CO measurement. In order to examine the accuracy of the robotic system assessment, the absolute difference between the robotic assessments and radiographic evaluations was calculated., Results: Intraoperative robotic measurements reported a mean error of 0.2-0.6 mm for each registration, with no significant difference between them (p = 0.311). The average absolute discrepancies between the robotic and radiographic assessments in the LLD and CO measurements were 1.3 ± 1.5 mm (p = 0.17) and 1.1 ± 0.9 mm (p = 0.11), respectively, while the Pearson's correlation coefficients were 0.69 and 0.71., Conclusions: An external marker without a femoral array inserted into a screw positioned in the greater trochanter would be an easier and faster method to measure LLD and CO. Our study showed that the measured values of LLD and CO obtained by intraoperative express workflow robot-assisted THA system were precise and accurate., (© 2020 John Wiley & Sons Ltd.)

Background: Modular dual-mobility (MDM) total hip arthroplasty (THA) is designed with a cobalt-chromium liner inserted into a titanium acetabular component. The purpose of this study is to investigate the potential risks for fretting corrosion at this junction, by measuring serum metal ions, after MDM acetabular revision., Methods: Thirty-seven patients with well-functioning revision THAs participated in a cross-sectional study at mean 5.1 (2-10) years after surgery. All received a trabecular titanium MDM acetabular component. The serum levels of cobalt and chromium were measured using mass spectrometry., Results: The mean values of chromium and cobalt were 2.08 μg/L (95% confidence interval 0.9-3.2, range 0.02-11.8) and 1.99 μg/L (95% confidence interval 0.81-3.17, range 0.07-16.05), respectively. Eleven patients (29, 7%) had ion levels above the normal range, with 6 (16.2%) above 5 μg/L and 5 (13.5%) between 1 and 5 μg/L. A significant correlation was found between an elevated serum metal ion level and University of California Los Angeles score (P = .016)., Conclusion: We conclude that serum metal level elevation may occur secondary to metal debris resulting from corrosion of the index MDM THA. This potential risk should be included in the decision-making process when dealing with revision arthroplasty in young and active patients., (Copyright © 2020 Elsevier Inc. All rights reserved.)

Purrpose  Metal-on-metal (MoM) total hip arthroplasty (THA) has been a subject of recent discussion and concern due to the early failures caused by local and systemic adverse reactions related to specific designs. The aim of this study is to analyze the outcomes and survival rates of a single brand of MoM implants implanted in a consecutive series of patients at a single institution. Methods  Between 2007 and 2012, 116 (118 hips) patients were evaluated at a mean follow-up of 6.6 years after primary THA. The diagnosis leading to surgery was osteoarthritis (80 patients) and proximal femoral fracture (36 patients). A single design of THA was implanted. All patients were evaluated before surgery and postoperatively at 1, 3, 6, and 12 months by clinical scores and radiographic studies. The data analysis was made using Student's t -test. Results  The minimum follow-up was of 4 years, with a mean follow-up of 6.6 years. Two aseptic loosenings of the acetabular component were recorded (one per group), which were not associated with local or systemic complications related to metal ion release. Both were revised by an isolated acetabular cup substitution with metal-on-polyethylene couplings. Nonprogressive radiolucency lines < 2 mm in zone 2 were observed in other six patients around the acetabular component without clinical manifestation (four in the arthritis group and two in the fracture group). Postoperative Harris Hip Score and SF-36 (36-Item Short Form Survey) score improved in both groups. Conclusion  Despite several MoM implants showing early complications and failures, a specific MoM design may be associated with good clinical results at a mid- to long-term follow-up. Level of Evidence  This is a therapeutic case series, Level 4 study., Competing Interests: Conflict of Interest None declared., (The Author(s). This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial-License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes, or adapted, remixed, transformed or built upon. ( https://creativecommons.org/licenses/by-nc-nd/4.0/ ).)

Purpose: During the last decade, total hip arthroplasty has become a common procedure performed in young patients, as well as elderly ones. This has led to an increase in total hip arthroplasty revisions. Loosening of primary components with associated bone loss represents the major cause of total hip arthroplasty revision. This study evaluates the safety and performance of an enzyme-deantigenic equine-derived bone graft material in acetabular defect reconstruction., Methods: Records of 55 patients who were treated for Paprosky type II or III acetabular bone defects with arthroplasty revisions using equine-derived bone and followed for an average of 34 months (range from 24 to 48 months) were analyzed., Results: Of the 55 revisions, 49 (89%) were regarded as successful, showing good osteointegration without signs of mobilization. Failures included six cases (11%) of mobilization: five cases of aseptic mobilization (9.1% of revisions, 83% of failures) and one case of septic mobilization (1.9% of revisions, 17% of failures). These results are consistent with those of studies having a similar follow-up period for allografts used in combination with trabecular metal components., Conclusions: Results of the present study suggest that enzyme-treated equine-derived bone grafts may be a valid alternative to autogenous and homologous bone grafts in total hip arthroplasty revision.

Background: Partial lesions of the anterior cruciate ligament (ACL) are more common than is generally thought, accounting for about 10-12% of ACL injuries. Selective reconstruction may be considered as an option in isolated bundle rupture. The purpose of this study is to evaluate both subjective and objective clinical results, as well as functional recovery time, after selective arthroscopic single-bundle reconstruction in a consecutive series of patients affected by partial ACL rupture., Materials and Methods: Thirty-six patients undergoing selective reconstruction of a single ACL bundle were retrospectively evaluated from a series of 354 ACL reconstructions performed over a 3-year period. Although the suspicion of partial lesions was present at clinical and magnetic resonance imaging (MRI) evaluation, final diagnosis was obtained during arthroscopy. All patients were operated using the same technique and type of fixation, and undergoing the same functional recovery protocol., Results: Mean follow-up was 64 months (48-84 months). All patients but one achieved good functional recovery and returned to their sports within a mean period of 6.1 months. A single patient complained of postoperative instability 1 year after the index operation and needed further surgery. No complications were recorded., Conclusions: Selective reconstruction of partial ACL injury is a method to bear in mind because it offers quick functional recovery. Specific technical and diagnostic steps should be performed and discussed with patients preoperatively., Level of Evidence: Level 4, retrospective study.

Purpose  Recent advances in total knee arthroplasty (TKA) include an accelerometer portable system designed to improve component position and alignment. The purpose of this study is to evaluate whether accelerometer navigation system can be a valuable option in complex TKAs for extra-articular deformity of the lower limb or in case of retained femoral hardware. Methods  A group of 13 patients underwent TKA with an accelerometer navigation system. Three patients had a tibial extra-articular deformity, six had a femoral extra-articular deformity, and four had an intramedullary nail in the femur. Preoperative and postoperative mechanical axes were measured from full-length lower extremity radiographs to evaluate alignment. The alignment of prosthetic components in the frontal and sagittal planes was determined by postoperative radiographs. Results  At 30-days postoperative radiographic check, the hip knee ankle angle was within 2.0° (0 ± 1) of the neutral mechanical axis. The alignment of the tibial component on the frontal plane was 90.0° (range 89-91) and on the sagittal plane 5.0° (range 3-7). The alignment of the femoral component on the frontal plane was 90.0° (range 89-91) and on the sagittal plane 3.0° (range 0-5). Conclusion  The alignment of the prosthetic components has been accurate and comparable to other navigation systems in literature without any increase in surgical times. The accelerometer-based navigation system is therefore a useful technique that can be used to optimize TKA alignment in patients with extra-articular deformity or with lower limb hardware, where the intramedullary guides cannot be applied. Level of Evidence  This is an observational study without a control group, Level III., Competing Interests: Conflict of Interest None declared.

Background: Total knee arthroplasty (TKA) in patients with post-traumatic extra-articular deformity (EAD) is difficult to manage using conventional instrumentation techniques. In this study, we evaluate whether accelerometer navigation system can be a valuable option to make accurate bone resections and restore the neutral mechanical axis in complex TKA patients with EAD., Methods: From May 2015 to June 2017, 18 consecutive TKA were performed in 18 patients with knee osteoarthritis with associated EAD. An accelerometer-based navigation system was used to guide tibial and femoral resection in the coronal and sagittal plane. Postoperative lower limb alignment in coronal plane and component position in coronal and sagittal plane was measured through full-leg weight-bearing X-ray. Clinical score were recorded using the Knee Society Score at the final follow-up., Results: The mean hip-knee-ankle angle was 0.9° ± 1.4° varus alignment. The coronal alignment of the femoral component was 89.2° ± 1.9°, and the coronal alignment of the tibial component was 89.4° ± 2.1°. The sagittal alignment of the femoral component was 93.2°± 1.9°, and the sagittal alignment of the tibial component was 84.4° ± 3.1°. At the final follow-up, the Knee Society Score was 89 points (range, 82-100), and the functional score was 86.7 points (range, 60-100). No intraoperative and postoperative surgical complications were reported using this technology., Conclusion: Accelerometer-based navigation is accurate in achieving neutral mechanical alignment and optimal implant position after TKA in patients with EAD. This system should be considered a valuable option to the more complex technique of computer navigation or robotic surgery., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Purpose: The purpose of this study was to evaluate safety, efficacy, and learning curves of anterior-based muscle-sparing total hip arthroplasty (ABMS-THA) in the supine position. Furthermore, early functional outcome was evaluated and compared to direct anterior approach (DAA) by measuring surface electromyography (sEMG)., Methods: We present a prospective cohort study of 343 hips. The safety and learning curve were assessed by recording operative time and peri-operative adverse events. For assessment of efficacy, functional and radiological outcomes were evaluated. A selected group of 32 patients have been studied by sEMG and compared to a matched group of 32 patients who received a THA using DAA approach., Results: There was one dislocation (0.3%); two (0.6%) patients had an intra-operative fractures of the greater trochanter; two patients (0.6%) experienced a self-limited femoral nerve palsy. Physical therapy milestones for hospital discharge were reached on an average of 1.7 days. sEMG showed that ABMS and DAA have a similar muscle recruitment pattern and functional recovery after THA. One patient was revised for infection, 16 were lost, and 326 hips were available with a median follow-up of 42 months (range 24-60). The mean Harris Hip Score (HSS) increased from 44.3 to 91.9. Ninety-six percent of the hips had a leg length discrepancy (LLD) < 5 mm. There were no radiological signs of mechanical loosening or osteolysis., Conclusions: The ABMS approach in the supine position is clinically effective and safe; special advantages include a very low dislocation rate and a great control of LLD.

Purpose: The use of tranexamic acid (TXA) in total hip arthroplasty (THA) can significantly reduce blood losses with many clinical and economical advantages. However, no consensus has been reached regarding the optimal regimen for TXA administration. The aim of this study is to analyse and compare the haemostatic effect of two different intravenous (IV) regimens of TXA., Materials and Methods: We planned a single-centre, prospective, randomized study including 80 patients who underwent primary unilateral minimally invasive THA because of a hip osteoarthritic degeneration. We divided patients into two groups: the G10 group received two IV doses of 10 mg/kg of TXA, and the G20 group received two doses of 20 mg/kg., Results: No significant differences in mean minimum levels of Hb and HcT stratified by days after surgery were uncovered between the two groups despite the use of two different dosages of TXA. Also the mean blood volume loss was statistically similar between two groups. No differences were also observed regarding the occurrence of adverse effects., Conclusions: In two IV bolus regimens of TXA administration, the use of a dose of 10 or 20 mg/kg provides statistically similar results in blood loss sparing. Therefore, the use of two 10 mg/kg doses could be considered more advisable in order to reduce the potential thromboembolic risks related to this drug.

Purpose: To evaluate the feedback from post-operative three-dimensional computed tomography (3D-CT) on femoral tunnel placement in the learning process, to obtain an anatomic anterior cruciate ligament (ACL) reconstruction., Methods: A series of 60 consecutive patients undergoing primary ACL reconstruction using autologous hamstrings single-bundle outside-in technique were prospectively included in the study. ACL reconstructions were performed by the same trainee-surgeon during his learning phase of anatomic ACL femoral tunnel placement. A CT scan with dedicated tunnel study was performed in all patients within 48 h after surgery. The data obtained from the CT scan were processed into a three-dimensional surface model, and a true medial view of the lateral femoral condyle was used for the femoral tunnel placement analysis. Two independent examiners analysed the tunnel placements. The centre of femoral tunnel was measured using a quadrant method as described by Bernard and Hertel. The coordinates measured were compared with anatomic coordinates values described in the literature [deep-to-shallow distance (X-axis) 28.5%; high-to-low distance (Y-axis) 35.2%]. Tunnel placement was evaluated in terms of accuracy and precision. After each ACL reconstruction, results were shown to the surgeon to receive an instant feedback in order to achieve accurate correction and improve tunnel placement for the next surgery. Complications and arthroscopic time were also recorded., Results: Results were divided into three consecutive series (1, 2, 3) of 20 patients each. A trend to placing femoral tunnel slightly shallow in deep-to-shallow distance and slightly high in high-to-low distance was observed in the first and the second series. A progressive improvement in tunnel position was recorded from the first to second series and from the second to the third series. Both accuracy (+52.4%) and precision (+55.7%) increased from the first to the third series (p < 0.001). Arthroscopic time decreased from a mean of 105 min in the first series to 57 min in the third series (p < 0.001). After 50 ACL reconstructions, a satisfactory anatomic femoral tunnel was reached., Conclusion: Feedback from post-operative 3D-CT is effective in the learning process to improve accuracy and precision of femoral tunnel placement in order to obtain anatomic ACL reconstruction and helps to reduce also arthroscopic time and learning curve. For clinical relevance, trainee-surgeons should use feedback from post-operative 3DCT to learn anatomic ACL femoral tunnel placement and apply it appropriately., Level of Evidence: Consecutive case series, Level IV.

Background: Oxidized zirconium (OxZr) has demonstrated excellent mechanical properties in vitro when used against articular cartilage; less coefficient of friction and less chondral damage have been found when compared with cobalt-chromium (CoCr) implants. However, controversy exists as to whether implants with a zirconium femoral component articulate safely with a native patella in total knee arthroplasty (TKA). To answer this question, the clinical and radiographic results were analysed from a group of patients who underwent a TKA with patella retention; the OxZr versus CoCr femoral components were compared., Methods: The present study prospectively evaluated 83 knees of 74 patients from 2009 to 2010. Each patient was evaluated clinically (visual analogue scale, Knee Society score, patellar score) and radiographically (long leg standing radiograph, anterior-posterior and latero-lateral projections, axial view of the patella) pre-operatively and postoperatively with a mean follow-up of 4.47years. The patellar tilt and shift, and progression of patellofemoral osteoarthritis were calculated with the axial view., Results: There were no patient reported adverse reactions and none of the evaluated prostheses failed. Both the clinical and radiographic evaluations showed no statistically significant between-group differences., Conclusion: No adverse events were observed clinically or radiologically. These results justify pursuing the use of oxidized zirconium as an alternative bearing surface for a femoral component associated with patellar retention in TKA., (Published by Elsevier B.V.)

In the last years considerable research and development activity have been expended to find new ceramic bone substitutes for the treatment of bone defects. However in many cases the drawback of synthethic bone substitutes are the slow graft incorporation and remodelling into the host bone. The purpose of this study was to analyze the kinetics of resorption and new bone formation of new calcium sulfate (CaSO 4 )/calcium phosphate (CaPO 4 ) bioceramic engineered to enhance its bone forming properties. We prospectively evaluated the results of a series of 15 hips with osteonecrosis of the femoral head (ONFH) treated at with core decompression and injection of the CaSO 4 /CaPO 4 composite. In all hips, a quantitative computed tomography (QTC) scan was taken within one week after the surgery, at 12 months, 2 years and finally with a minimum of 4 years follow-up. The mean HU in the immediate post-operative period was 1445 (Range 1388-1602); At one year the mean HU strongly decrease at 556.6 HU (P < 0.01); The mean HU at 2 years follow-up further decreased to 475.1. The mean HU at 4 years was unchanged. The quantitative and qualitative CT scan data of this series indicates that the CaSO 4 -CaPO 4 ceramic composite resorbs over a narrow timeframe and the gradual resorption of the graft within the defect provides an ideal environment for the direct new bone growth that propagates across the defect.

Purpose: The anterior cruciate ligament (ACL) reconstruction is one of the most performed and successful orthopaedic procedures. The results are considered independent by the choice of the graft and the fixation devices. A growing interest on resorbable non-metallic fixation devices versus standard metallic fixation devices has been noted over recent years with few clinical experiences reported in the literature. The aim of this study is to compare the clinical and radiological outcomes of patients undergoing ACL reconstruction using autologous hamstring tendons with tibial fixation by a centrally placed resorbable screw and sheath to a combination of an eccentrically placed resorbable interference screw and supplementary staple fixation., Methods: Ninety patients undergoing an isolated, single-bundle, primary ACL reconstruction with autologous hamstring tendons, using the same femoral fixation, were randomized to a tibial fixation with a centrally placed resorbable screw and sheath, BioIntrafix (group A), or an eccentrically placed resorbable interference screw, BioRCI, and two non-resorbable staples (group B). The latter has represented for many years our standard fixation method. Clinical evaluations (KOOS, IKDC, KT-2000™ side-to-side difference) and radiological analyses were conducted in both groups with a minimum follow-up of 2 years., Results: We assisted in a satisfactory pain relief and functional improvements, without significant clinical and radiological differences in both groups. No further surgery was needed in patients with the screw/sheath tibial fixation. Seven patients with the screw/staples tibial fixation needed the surgical removal of the fixation devices due to pes anserinus irritation or local infection years after the index operation. Other parameters such as the tunnel enlargement were not statistically different in the two groups., Conclusions: Good clinical and radiological outcomes of ACL reconstruction by a screw/sheath tibial fixation have been reported showing comparable results with respect to screw/staples fixation. There were no failures associated with loss of fixation with either of tibial fixation methods. A fewer number of surgical removals of tibial devices were also recorded in patients treated by the screw/sheath fixation system, related to the absence of local intolerance or infection compared to subjects with a standard tibial fixation.

Background: Polyethylene (PE) wear is a major contributor to implant loosening following total knee arthroplasty (TKA), and advanced bearings in TKA are being investigated with hopes of reducing or eliminate wear-related loosening. Currently, information on knee tribology is available from national joint registries and may be the best tools to evaluate the efficacy and safety of design innovations in joint arthroplasty., Questions/purposes: We performed a review of national joint registries trying to answer the following questions: "Which is the main factor directly related to revisions rate in TKA?" and "Are there new bearing options better than conventional ones?", Methods: A review was performed of all published annual reports of National Joint Registers, as well as of the literature. The search was carried out using and comparing the National Joint Registers., Results: Current data from registries for total knee arthroplasty indicates that age is the major factor affecting the outcome of primary total knee replacement. The 10-year cumulative revision rate for non-cross-linked PE was 5.8% and for XLPE it was 3.5%. The effect of cross-linked polyethylene was more evident in the younger patients. The survival of the oxidized zirconium (OxZr) femoral component appears better when compared to a similar age group of patients with conventional group of prostheses. Our review suggests that the revision rates are half for the OxZr components compared to conventional CoCr femoral components., Conclusions: Age is the most relevant single factor related to revision rate. Cross-linked PE has a statistical lower revision rate at 10 years compared to conventional PE and, in the OxZr group, the revision rate is 2 times lower than Co-Cr in the same group of age., Competing Interests: Fabrizio Matassi, MD, Christian Carulli, MD, Luigi Sirleo, MD, and Andrea Cozzi Lepri, MD, have declared that they have no conflict of interest. Roberto Civinini, MD, reports personal fees from Smith & Nephew, outside the work. Innocenti, MD, reports personal fees from Smith & Nephew, outside the work. Human/Animal Rights This article does not contain any studies with human or animal subjects performed by the any of the authors. Informed Consent N/A Required Author Forms Disclosure forms provided by the authors are available with the online version of this article.

Background: Oxidized zirconium (OxZr) femoral component for total knee arthroplasty (TKA) have been introduced in an attempt to reduce polyethylene wear and secondary osteolysis and improve longevity of implants., Questions/purposes: We reviewed clinical studies in literature evaluating OxZr femoral component for TKA. The aim of this review was to evaluate the clinical outcome and survival rate of TKA with an OxZr femoral component., Methods: A review of the existing literature was undertaken to collect data on the OxZr femoral component in order to provide a better understanding of its performance. Of 34 studies published in the literature, 8 met the eligibility criteria and were included in the final analysis., Results: Findings indicated that the mean Knee Society knee score improved in all series from preoperative to postoperative evaluation. The postoperative Knee Society knee score reported range from 84 to 95 and mean postoperative Knee Society functional score range from 74 to 90. The revision rate with this implant is low with up to 12.6 years of follow-up, with three revisions in total. The survival rate ranged from 100-98.7% at 5-7 years to 97.8% at 10 years., Conclusions: Excellent clinical outcome and high survival rate has been demonstrated for OxZr femoral component in TKA. No adverse reaction has been described for this new material., Competing Interests: Fabrizio Matassi, MD, Christian Carulli MD, Luigi Sirleo, MD, and Andrea Cozzi Lepri, MD have declared that they have no conflict of interest. Roberto Civinini, MD, reports personal fees from Smith & Nephew, outside the work. Innocenti, MD, reports personal fees from Smith & Nephew, outside the work. Human/Animal Rights This article does not contain any studies with human or animal subjects performed by the any of the authors. Informed Consent N/A Required Author Forms Disclosure forms provided by the authors are available with the online version of this article.

Background: Dislocation is one of the most frequent causes of failure of hemiarthroplasties of the hip, which is the most common treatment for femoral neck fractures in elderly patients. A revision with conversion to total hip arthroplasty is the gold standard in case of failure of closed reduction: however, the use of standard or modular components shows variable outcomes. The use of a dual mobility cup has been evaluated in patients with unstable implants, given the good outcomes obtained in primary and revision surgery. The aim of this study was to assess the results of revisions by dual mobility cups in unstable hemiarthroplasties., Materials and Methods: Thirty-one patients (mean age 75.4 years) were retrospectively evaluated between 2006 and 2010 after conversion to total hip arthroplasty with dual mobility cups for recurrent dislocations. The mean number of dislocations was 2.6 (range 2-5). The evaluation was performed by the American Society of Anesthesiologists physical function score (ASA) and the Harris hip score, and several radiologic criteria., Results: The mean follow-up was 3.8 years. No recurrence of dislocation was recorded. The ASA score remained unchanged, and the mean Harris hip score improved from 62.2 before dislocation to 76.0 points postoperatively., Conclusions: Dual mobility cups may be a useful option in the treatment of a hemiarthroplasty dislocation. No risk of a new revision due to instability after insertion of dual mobility cups resulted in our experience, and this option may be strongly considered in cases of revisions of unstable hemiarthroplasties.