Search

It is very important to design electrical machineries with high efficiency from the point of view of saving energy. Therefore, topology optimization (TO) is occasionally used as a design method for improving the performance of electrical machinery under the reasonable constraints. Because TO can achieve a design with much higher degree of freedom in terms of structure, there is a possibility for deriving the novel structure which would be quite different from the conventional structure. In this paper, topology optimization using sequential linear programming using move limit based on adaptive relaxation is applied to two models. The magnetic shielding, in which there are many local minima, is firstly employed as firstly benchmarking for the performance evaluation among several mathematical programming methods. Secondly, induction heating model is defined in 2-D axisymmetric field. In this model, the magnetic energy stored in the magnetic body is maximized under the constraint on the volume of magnetic body. Furthermore, the influence of the location of the design domain on the solutions is investigated.

Abstract Background Buried penis, most commonly seen in children, is particularly debilitating in adults, resulting in inability to void while standing and it also affects vaginal penetration. We report a case of buried penis due to a traffic accident, which caused dislocation of the fractured pubic bone that shifted inside and pulled the penis by its suspensory ligament. Case presentation A 55-year-old man was admitted to our hospital with a chief complaint of hidden penis while in the sitting position. He had suffered a pelvic fracture in a traffic accident four years previously, and his penis was covered with suprapubic fat when he was in a sitting position. He was unable to have sexual intercourse. We performed a penile lengthening procedure, including inverse V-Y-plasty of the dorsal skin of the penile root, suspensory desmotomy and fat removal, under general anesthesia. There was a good cosmetic result with satisfactory penile erection, which allowed successful sexual intercourse after surgery. Conculsion We performed penile elongation surgery with inverse V-Y-plasty of the dorsal skin of the penile root, suspensory desmotomy, and fat removal. Surgical treatment of buried penis achieves marked aesthetic and functional improvement, and benefits the majority of patients, resulting in satisfactory erection and successful sexual intercourse.

Abstract Background Wilms' tumor is rarely found in adults and there are no established treatment guidelines for such tumors in adults. Whereas calcification is a common finding in neuroblastoma, it is considered uncommon in Wilms' tumor. Case presentation We report a case of adult Wilms' tumor with calcification in a 22-year-old man. He had been initially referred to our hospital with a chief complaint of right flank pain 5 years previously, when abdominal computed tomography had revealed focal calcification at the upper pole of the right kidney. Although we planned further assessment, he did not revisit our hospital again until 5 years later, again because of right flank pain. Ultrasound and computed tomography scan revealed a large mass lesion with calcification in the right kidney, invasive to the hepatic lobe. The patient underwent curative right nephrectomy and partial right hepatic lobectomy. Pathological analysis demonstrated a nephroblastoma (Wilms' tumor) with predominant epithelial histology infiltrating the hepatic lobe. The patient has been well without tumor recurrence for 15 months after surgery. Conclusions Calcification may be a sign of slow tumor gowth and possibly a favorable prognosis in cases of adult Wilms' tumor.

High-strength ceramic materials are known for their exceptional mechanical properties; however, they are often plagued by brittleness, limiting their applications. Because of the inherent difficulty of dislocation glide and multiplication in ceramics, efforts to overcome the brittleness of ceramics by activating plastic deformation have faced challenges. This work demonstrates that Al2O3–GdAlO3 (Gadolinium Aluminum Perovskite: GAP) eutectic micropillars with submicron-scale fibrous microstructures exhibit remarkable plastic deformability. They displayed engineering plastic strains of up to 5% even at 25 °C, while the micropillars of Al2O3 or GAP single crystals exhibited brittle fracture similar to conventional high-strength ceramics. The plasticity in Al2O3–GAP eutectic was attributed to the activation of primary prismatic slip and secondary basal slip in the Al2O3 phase, which is typically considered inactive at room temperature. These findings suggest that plastic deformability can be achieved in high-strength ceramic materials by fabricating refined eutectic microstructures.Overcoming the intrinsic brittleness of high-strength ceramic materials is required for improving their reliability. Here, the authors report emergence of plastic deformability in ceramics is achievable through refining eutectic microstructures. [ABSTRACT FROM AUTHOR]

This article proposes a computational method for finite element analysis with deformed shape constraints for analyzing constructed structures to account for deformations that occur before shape measurement by a terrestrial laser scanner (TLS). In this method, point clouds obtained by a TLS are considered as a partial surface of the deformed structure. An analysis model is assumed to be created from CAD data or drawings. The analysis is performed under deformed shape constraints, namely, the deformed surface constraints or the normal vector constraints, which are generated by the point clouds. These constraints are introduced to reproduce the current displacements and stresses for the structure through the analysis. This method was applied to analyses of a plate and a desk using point clouds, which were created virtually on a computer or obtained by a TLS in the numerical examples. The results showed that this method can consider unexpected deformations that occur before laser scanning. Although the computed stresses oscillated when the scanned point cloud was used due to measurement errors and conventional point cloud processing methods, the stress values were responsive enough to indicate unnatural shapes of the deformed structure. Moreover, the oscillation was observed only in areas with constraints, whereas it was not seen in areas without constraints. [ABSTRACT FROM AUTHOR]

Generally, brazing is completed when the brazing filler metal permeates the gap by uniform wetting. It is believed that the joining process is completed with the formation of joint defects 'voids' in the process of uniform wetting. However, previous studies have shown that what occurs when brazing is performed is non-uniform wetting. It is suggested that this non-uniform wetting is the cause of void generation. Wetting and spreading of brazing filler metal is tested on a metal plate, as described in JIS Z 3191. This is used to investigate the wetting of the brazing filler metal. However, this method does not cover the wetting of the molten brazing filler metal as it moves into the gap. Therefore, it is suggested that the JIS Z 3191 experiment is insufficient to evaluate the wetting of the molten brazing filler metal that penetrates into the gap. In this experiment, we created new specimen. It is called us 'V-groove specimen'. Specimens were created with two base metals. They are pure copper and lead-free brass in which bismuth was used as an alternative element. In order to do in situ experiments, it was not possible to observe the inside of a conventional electric furnace. Therefore, we produced a furnace with a window for in-situ observation and experimented with it. As a result of experiments with V-groove specimens, it was found that there are two types of wetting of brazing filler metal. They are called 'primary wetting' and 'secondary wetting'. The shape of the specimen was measured and evaluated for two types of wetting. The results showed that the primary wetting was measurable in shape and spread evenly. However, the shape of the secondary wetting could not be measured, and it was found to be non-uniformly spread. [ABSTRACT FROM AUTHOR]

In recent years, there has been a high demand in forestry and forest research for the accurate measurement of tree traits from point clouds captured by terrestrial laser scanners. However, the reliability of the calculated values is not sufficient due to the difficulty of accurate registration of each tree over a large area of forest. To solve this problem, we introduce localized multi-view registration for correcting the registration matrix of each tree stem. In addition, we discuss methods for registering the whole point clouds of a forest by using the registration matrices locally calculated for tree stems. Especially, we discuss a method to align tree stem points that do not have sufficient overlapping points required in registration. The proposed method was applied to actual forest point clouds and diameter at breast height (DBH) was compared to the manually measured DBH. Experimental results showed that the proposed method was effective in reducing registration errors and in calculating tree stem traits with high accuracy. [ABSTRACT FROM AUTHOR]