Search

Developing synthetic materials able to mimic micro- and macrorheological properties of natural networks opens up to novel applications and concepts in materials science. The present contribution describes an active network based on a semi-synthetic polymer, a lactitol-bearing chitosan derivative (Chitlac), and a transient inorganic cross-linker, boric acid. Due to the many and diverse anchoring points for boric acid on the flanking groups of Chitlac, the cross-links constantly break and reform in a highly dynamic fashion. The consequence is a network with unusual non-equilibrium and mechanical properties closely resembling the rheological behavior of natural three-dimensional arrangements and of cytoskeleton. Concepts like network nucleation, reorganization and disassembly are declined in terms of amount of the cross-linker, which acts as a putative motor for remodeling of the network upon application of energy. The out-of-equilibrium and non-linear behavior render the semi-synthetic system of great interest for tissue engineering and for developing in-vitro mimics of natural active matrices.

The present paper explores the effect of boric acid on Chitlac, a lactose-modified chitosan which had previously shown interesting biological and physical-chemical features. The herewith-reported experimental evidences demonstrated that boric acid binds to Chitlac, producing conformational and association effects on the chitosan derivative. The thermodynamics of boric acid binding to Chitlac was explored by means of 11B NMR, circular dichroism (CD), and UV–vis spectroscopy, while macromolecular effects were investigated by means of viscometry and dynamic light scattering (DLS). The experimental results revealed a chain–chain association when limited amounts of boric acid were added to Chitlac. However, upon exceeding a critical boric acid limit dependent on the polysaccharide concentration, the soluble aggregates disentangle. The rheological behavior of Chitlac upon treatment with boric acid was explored showing a dilatant behavior in conditions of steady flow. An uncommonly high dependence in the scaling law between the zero-shear viscosity and the concentration of Chitlac was found, i.e., η0 ∝ CCTL5.8, pointing to interesting potential implications of the present system in biomaterials development.

Adhesive coatings for implantable biomaterials can be designed to prevent material displacement from the site of implant. In this paper, a strategy based on the use of melanin-like nanoparticles (MNPs) for the development of adhesive coatings for polysaccharidic membranes was devised. MNPs were synthesized in vitro and characterized in terms of dimensions and surface potential, as a function of pH and ionic strength. The in vitro biocompatibility of MNPs was investigated on fibroblast cells, while the antimicrobial properties of MNPs in suspension were evaluated on E. coli and S. aureus cultures. The manufacturing of the adhesive coatings was carried out by spreading MNPs over the surface of polysaccharidic membranes; the adhesive properties of the nano-engineered coating to the target tissue (intestinal serosa) were studied in simulated physiological conditions. Overall, this study opens for novel approaches in the design of naturally inspired nanostructured adhesive systems.

Osteoarthritis (OA) is a chronic disease affecting joint functionality and often managed with hyaluronic acid (HA) administration. In this study, a hydrogel based on a lactose-modified chitosan (CTL) reticulated with boric acid has been developed as a viscosupplement for OA treatment. The rheological characterization allowed to identify a composition whose properties were in line with those of commercial products (in the order of tens of Pascal). The selected CTL-hydrogel showed biocompatibility and antioxidant activity in vitro, and it did not influence cytokines release by macrophages. Degradation studies carried out over 24 h pointed out its higher resistance to chemical degradation with respect to HA samples. Overall, this study underlines the advantages of the CTL-hydrogel to address the treatment of OA and shed light on an innovative application of CTL polymer, which is one of the main component of the proposed hydrogel system and not used in mixture with other molecules.

Biodegradable membranes for cartilage applications were manufactured starting from polymeric networks of a lactose-modified chitosan (CTL), previously proposed for chondrocytes stimulation. This implantable biomaterial was conceived as a reservoir of a bioactive polymer that could promote the activity of chondrocytes and the healing of cartilage defects. Freeze-drying of reticulated hydrogels enabled to obtain pliable membranes with a homogeneous polymeric texture, as pointed out by scanning electron microscopy analyses. Swelling tests and dimensional evaluations showed that the material is able to absorb physiological fluids and expand gradually upon rehydration. This feature was evaluated on a simulated cartilage defect on pig's humerus (ex vivo), which revealed the capability of the membranes to progressively fit the tissue voids on the damaged cartilage. The rheological properties of the rehydrated membranes pointed out their peculiar strain-stiffening behavior, which represents a promising feature for the regeneration of tissues subjected to variable mechanical loads and deformations. Biological in vitro studies demonstrated the biocompatibility of the membranes in contact with primary chondrocytes and osteoblasts. Taken together, these results represent a starting point for the development of a novel generation of implantable biomaterials for cartilage treatment based on CTL.

An emerging strategy to improve adhesiveness of biomaterials in wet conditions takes inspiration from the adhesive features of marine mussel, which reside in the chemical reactivity of catechols. In this work, a catechol-bearing molecule (dopamine) was chemically grafted onto alginate to develop a polysaccharide-based membrane with improved adhesive properties. The dopamine-modified alginates were characterized by NMR, UV spectroscopy and in vitro biocompatibility. Mechanical tests and in vitro adhesion studies pointed out the effects of the grafted dopamine within the membranes. The release of HA from these resorbable membranes was shown to stimulate fibroblasts activities (in vitro). Finally, a preliminary in vivo test was performed to evaluate the adhesiveness of the membrane on porcine intestine (serosa). Overall, this functionalized membrane was shown to be biocompatible and to possess considerable adhesive properties owing to the presence of dopamine residues grafted on the alginate backbone. Statement of Significance This article describes the development of a mussels-inspired strategy for the development of an adhesive polysaccharide-based membrane for wound healing applications. Bioadhesion was achieved by grafting dopamine moieties on the structural component on the membrane (alginate): this novel biomaterial showed improved adhesiveness to the intestinal tissue, which was demonstrated by both in vitro and in vivo studies. Overall, this study points out how this nature-inspired strategy may be successfully exploited for the development of novel engineered biomaterials with enhanced bioadhesion, thus opening for novel applications in the field of general surgery.

Alginate-based membranes containing hyaluronic acid (HA) were manufactured by freeze-drying calcium-reticulated hydrogels. The study of the distribution of the two macromolecules within the hydrogel enabled to highlight a polymer demixing mechanism that tends to segregate HA in the external parts of the constructs. Resistance and pliability of the membranes were tuned, while release and degradation studies enabled to quantify the diffusion of both polysaccharides in physiological solution and to measure the viable lifetime of the membranes. Biological studies in vitro proved that the liquid extracts from the HA-containing membranes stimulate wound healing and that fibroblasts are able to colonize the membranes. Overall, such novel alginate-HA membranes represent a promising solution for several medical needs, in particular for wound treatment, giving the possibility to provide an in situ administration of HA from a resorbable device.

Implantable membranes based on alginate and hyaluronic acid (HA) were manufactured to obtain a rapidly resorbing pliable mesh for the in situ administration of HA to intestinal tissue. Morphological analyses of this interpenetrated matrix pointed out a homogeneous polymeric texture while degradation studies demonstrated that the material is able to dissolve in physiological solutions within few days. Biological studies in vitro showed that the membrane is biocompatible towards human dermal fibroblasts and that liquid extracts from the HA-containing membrane can stimulate wound healing. A preliminary in vivo biocompatibility study on rats showed that the membranes in direct contact with the intestine did not elicit any acute adverse reaction or immune response, while only a mild inflammatory reaction was noticed at the mesenteric or serosal region. Overall, these results appear to support the application of these polysaccharide-based materials for intestinal wound healing.[GRAPHICS].

Alginate/hydroxyapatite composites, with isotropic or anisotropic porosity, were developed using two different freezing methods. Morphological analysis highlighted the differences in their three-dimensional network. Swelling and in vitro degradation studies revealed that both structures are highly hydrophilic and stable. Static compression tests showed that isotropic scaffolds possess higher modulus and toughness than anisotropic ones. Cyclic compression tests revealed that wet scaffolds are able to withstand high deformations with a peculiar shape-recovery behaviour. In vitro biological tests showed that osteoblast-like cells proliferate on both types of structures in a comparable manner.

The main functions of biological adhesives and sealants are to repair injured tissues, reinforce surgical wounds, or even replace common suturing techniques. In general surgery, adhesives must match several requirements taking into account clinical needs, biological effects, and material features; these requirements can be fulfilled by specific polymers. Natural or synthetic polymeric materials can be employed to generate three-dimensional networks that physically or chemically bind to the target tissues and act as hemostats, sealants, or adhesives. Among them, fibrin, gelatin, dextran, chitosan, cyanoacrylates, polyethylene glycol, and polyurethanes are the most important components of these interfaces; various aspects regarding their adhesion mechanisms, mechanical performance, and resistance to body fluids should be taken into account to choose the most suitable formulation for the target application. This review aims to describe the main adhesives and sealant materials for general surgery applications developed in the past decades and to highlight the most important aspects for the development of future formulations.

The effect of transient cross-links has been explored on a lactose-modified chitosan, which previously had shown interesting biological features. The presence of galactose side chains and of the polyol spacer resulted particularly appealing for the reticulation by borate ions. The interaction between chitlac and borax was investigated by means of 11B NMR while rheology pointed to a marked non-linear behavior depending on the amount of borax added to the system. The presence of limited amount of cross-linking ion led to dilatant behavior when the steady flow curve was measured. In addition, strain stiffening was noticed on elastic response upon exceeding a critical stress, indicating a transient nature in the formation of the cross-links. The non-linear response of chitlac in the presence of borax compared surprisingly well with the one showed by proteins composing the natural ECM pointing at a possible role of mechanotransduction in the biological significance of the modified chitosan.

Current strategies in Central Nervous System (CNS) repair focus on the engineering of artificial scaffolds for guiding and promoting neuronal tissue regrowth. Ideally, one should combine such synthetic structures with stem cell therapies, encapsulating progenitor cells and instructing their differentiation and growth. We used developments in the design, synthesis, and characterization of polysaccharide-based bioactive polymeric materials for testing the ideal composite supporting neuronal network growth, synapse formation and stem cell differentiation into neurons and motor neurons. Moreover, we investigated the feasibility of combining these approaches with engineered mesenchymal stem cells able to release neurotrophic factors. We show here that composite bio-constructs made of Chitlac, a Chitosan derivative, favor hippocampal neuronal growth, synapse formation and the differentiation of progenitors into the proper neuronal lineage, that can be improved by local and continuous delivery of neurotrophins. Statement of Significance In our work, we characterized polysaccharide-based bioactive platforms as biocompatible materials for nerve tissue engineering. We show that Chitlac-thick substrates are able to promote neuronal growth, differentiation, maturation and formation of active synapses. These observations support this new material as a promising candidate for the development of complex bio-constructs promoting central nervous system regeneration. Our novel findings sustain the exploitation of polysaccharide-based scaffolds able to favour neuronal network reconstruction. Our study shows that Chitlac-thick may be an ideal candidate for the design of biomaterial scaffolds enriched with stem cell therapies as an innovative approach for central nervous system repair.

Polysaccharide networks, in the form of hydrogels and dried membranes based on chitosan and on the cross-linker tripolyphosphate (TPP), were developed using a novel approach. TPP was incorporated into chitosan by slow diffusion to favor a controlled gelation. By varying chitosan, TPP, and NaCl concentration, transition from inhomogeneous to homogeneous systems was achieved. Rheology and uniaxial compression tests enabled to identify the best performing hydrogel composition with respect to mechanical properties. FTIR, (31)P NMR, and spectrophotometric methods were used to investigate the interaction chitosan-TPP, the kinetics of phosphates diffusion during the dialysis and the amount of TPP in the hydrogel. A freeze-drying procedure enabled the preparation of soft pliable membranes. The lactate dehydrogenase assay demonstrated the biocompatibility of the membranes toward fibroblasts. Overall, we devised a novel approach to prepare homogeneous macroscopic chitosan/TPP-based biomaterials with tunable mechanical properties and good biocompatibility that show good potential as novel polysaccharide derivatives.

The present manuscript deals with the setup and evaluation of two analytical methods, namely Circular Dichroism (CD) and 23Na longitudinal relaxation, to determine the composition of binary mixtures of the sodium salts of alginate and hyaluronan in solution. The quantitative results obtained were confirmed by 1H NMR, and the developed methods were applied to the determination of the composition and polymer release of mixed hydrogels. Although focused on the specific case of binary mixtures of alginate and hyaluronan, the approach drawn in the present manuscript can find applications in different binary systems composed of natural or synthetic non-interacting polymers.

Purpose: Characterisation of chitosan-tripolyphosphate nanoparticles is presented with the aim of correlating particle shape and morphology, size distribution, surface chemistry, and production automatisation with preparation procedure, chitosan molecular weight and loaded protein.Methods: Nanoparticles were prepared by adding drop wise a tripolyphosphate-pentasodium solution to chitosan solutions under stirring. Trehalose, mannitol and polyethylene-glycol as bioprotectants were used to prevent particle aggregation and to reduce mechanical stress during freezing and drying processes.Results: As a novel result, time evolution of the particle size distribution curve showed the presence of a bimodal population composed of a fraction of small particles and of a second fraction of larger particles attributed to the rearrangement of particles after the addition of tripolyphosphate. Storage for 4 weeks resulted in a slight increase in average size, due to the continuous rearrangement of small particles. Improvement of nanoparticle stability after lyophilisation and spray-drying was observed in the presence of all bioprotectants. Trehalose was the best protectant for both methods. Finally, in vivo tests using chick embryos assessed the biocompatibility of chitosan, tripolyphosphate and the nanoparticles.Conclusion: The simple ionotropic gelation method with low-MW chitosan was effective in achieving reproducible nanoparticles with the desired physico-chemical and safety characteristics. (C) 2013 Elsevier B.V. All rights reserved.

The initial binding of calcium ions by alginate chains was investigated in dilute solution. The use of viscometry, light scattering, circular dichroism, and fluorescence quenching performed on both Ca(2+) and Mg(2+) alginate systems allowed collecting new experimental data in addition to those already reported in the literature. This led us to propose an ion multicomplex binding modality and to disprove the Ca(2+)-alginate monocomplex formation. The first mode of bonding was proposed to be formed by four G residues from facing chains in a conformation which, albeit ordered, is different from the well-known "egg box" one. This was indicated as a locally tilted conformation (tilted egg-box). The addition of further bonding ions caused the well-known cooperative egg-box conformation (strong bonding) with notable variation in the physical-chemical properties of the dilute solution.

Sterilization methods such as gamma-irradiation, steam sterilization and ethylene oxide gas treatment can have negative effects on molecular structure and properties of polysaccharide-based biomaterials. In this perspective, the use of supercritical carbon dioxide (scCO(2)) has been proposed as an alternative method for biomaterial sterilization. In this work, chemical, mechanical and biological properties of polysaccharidic membranes for surgical applications were investigated after sterilization by scCO(2). Four sets of sterilizing conditions were considered and SEC analyses were performed in order to identify the one with lower impact on the polysaccharidic matrix of membranes (alginate). Mechanical tests showed that the resistance of membranes was slightly affected after sterilization. Biological analyses proved the biocompatibility of the sterilized membranes both in vitro and in a preliminary in vivo test. Overall, this study points out that this sterilization technique can be successfully employed to achieve an effective and safe sterilization of polysaccharidic membranes for surgical use. (C) 2017 Elsevier Ltd. All rights reserved.

Tissue damage caused by excessive amounts of neutrophil-derived reactive oxygen species (ROS) occurs in many inflammatory diseases. Butyrate is a short-chain fatty acid (SCFA) with known anti-inflammatory properties, able to modulate several neutrophil functions. Evidence is provided here that butyrate inhibits neutrophil ROS release in a dose and time-dependent fashion. Given the short half-life of butyrate, chitosan/hyaluronan nanoparticles are next designed and developed as controlled release carriers able to provide cells with a long-lasting supply of this SCFA. Notably, while the inhibition of neutrophil ROS production by free butyrate declines over time, that of butyrate-loaded chitosan/hyaluronan nanoparticles (B-NPs) is sustained. Additional valuable features of these nanoparticles are inherent ROS scavenger activity, resistance to cell internalization, and mucoadhesiveness. B-NPs appear as promising tools to limit ROS-dependent tissue injury during inflammation. Particularly, by virtue of their mucoadhesiveness, B-NPs administered by enema can be effective in the treatment of inflammatory bowel diseases.

The manuscript focuses on the demixing of hyaluronan and alginate in the hydrogel state. Binary solutions of the two polysaccharides have been treated with Ca2+ as the alginate cross-linking ion and the radial distribution of the two components in the hydrogels was measured by means of 1H NMR. These results revealed the presence of alginate-enriched and hyaluronan-enriched domains stemming from a polysaccharide demixing. The hydrogels were characterized by means of uniaxial compression and creep-compliance measurements which showed that the demixing increased the overall resistance of the hydrogel to stress. In addition, due to the viscoelastic properties of hyaluronan, a marked increase of the Newtonian viscosity of the constructs was noticed. The peculiarity of the effect of hyaluronan was demonstrated by the use of an alginate unable to form gel by binding non-calcium binding alginate, i.e. mannuronan, ruling out the effect of viscosity over the time-dependent behavior of the mixed hyaluronan-alginate hydrogels.

Hydrogels are characterized by properties which make them ideal candidates for applications in several fields, such as drug delivery, biomedicine, and functional foods. Molecular diffusion out of a hydrogel matrix depends on their hydrodynamic radii and the mesh sizes within the matrix of the gel. A quantitative experimental and mathematical understanding of interactions, kinetics, and transport phenomena within complex hydrogel systems assists network design by identifying the key parameters and mechanisms that govern the rate and extent of solute release. In this article a calorimetric differential scanning calorimetry (DSC) study reports on the approach to parallel water effusion from a hydrogel matrix to the release of a model protein. The measurement of the water evaporation is taken as the simplest routine determination of a phenomenon that is basically due to a diffusive process through the porous structure of the gel and thermodynamically governed by the difference in the water chemical potential inside and outside of the bead. The analysis of the experimental calorimetric curves is made with the purpose of extracting several numerical parameters characteristic of each curve. The rationale is to develop a simple methodology to understand the release properties of the porous structure of the complex gel matrix by means of DSC.

Microencapsulation is a powerful technique commonly used for the protection of a wide range of biomolecules (small molecules and protein) and cells of bacterial, yeast and animal origin. In this work, solutions of mixed biopolymers are investigated as excipients for the formulation of a model system. The influence of the different components is studied from the viscoelastic behaviour of the starting solutions to the thermal characterisation of the gel beads therefrom produced. Rheological characterisation displays an almost regular trend for the several combination of solutes and for the frequency dependence, but some peculiarities emerge when both the model protein lysozyme and the cosolvent ethanol are present in the mixture; for the latter system a delayed melting behaviour of water appears in the gel beads. Changes in the temperature dependence of water evaporation from the beads are taken as an evidence of the rate of release from the beads.

The preparation of chitosan nanoparticles in combination with pectins, as additional mucoadhesive biopolymers, was investigated. Pectins from apple and from citrus fruit were considered; polygalacturonic acid was taken as a reference. Tripolyphosphate was used as an anionic cross-linker. Two different techniques were compared, namely the coating and the blending. Coated nanoparticles (NPs) in the ratio pectin: NPs from 2: 1 to 5: 1 evidenced that the size of NPs increased as the amount of pectin (both from apple and citrus fruit) was increased. In particular, for NPs coated with pectin from citrus fruit the size ranges from 200 to 260 nm; while for NPs coated with pectin from apple the size ranges from 330 to 450 nm. A minimum value of Z-potential around -35 mV was obtained for the ratio pectin: NPs 4: 1, while further addition of pectin did not decrease the Z-potential. Also blended NPs showed a dependence of the size on the ratio of the components: for a given ratio pectin: tripolyphosphate the size increases as the fraction of chitosan increases; for a low ratio chitosan: pectin a high amount of tripolyphosphate was needed to obtain a compact structure. The effect of the additional presence of loaded proteins in chitosan-pectin nanoparticles was also investigated, since proteins contribute to alter the electrostatic interactions among charged species. FT-IR and DSC characterization are presented to confirm the interactions between biopolymers. Finally, the biocompatibility of the used materials was assessed by the chorioallantoic membrane assay, confirming the safety of the materials. (C) 2016 Elsevier B.V. All rights reserved.

In this work, hydrogen peroxide (H2O2) was employed to improve the adhesion of an alginate-based membrane to intestinal serosa: mechanical adhesion test and SEC-MALLS studies were performed to investigate the contribution of H2O2-induced modifications of both tissue and membrane to the adhesion enhancement. Adhesion tests confirmed that the formation of an adhesive gelatin layer on serosa plays a major role in increasing adhesion forces, while SEC-MALLS studies revealed a slight decrease of alginate molecular weight. However, the latter chain degradation does not seem to significantly impair the adhesion strength. Overall, this study describes a possible strategy to create adhesive interfaces between biomaterials and collagen-containing tissues.

Treatment of non-healing wounds represents hitherto a severe dilemma because of their failure to heal caused by repeated tissue insults, bacteria contamination and altered physiological condition. This leads to face huge costs for the healthcare worldwide. To this end, the development of innovative biomaterials capable of preventing bacterial infection, of draining exudates and of favoring wound healing is very challenging. In this study, we exploit a novel technique based on the slow diffusion of tripolyphosphate for the preparation of macroscopic chitosan hydrogels to obtain soft pliable membranes which include antimicrobial silver nanoparticles (AgNPs) stabilized by a lactose-modified chitosan (Chitlac). UV-Vis and TEM analyses demonstrated the time stability and the uniform distribution of AgNPs in the gelling mixture, while swelling studies indicated the hydrophilic behavior of membrane. A thorough investigation on bactericidal properties of the material pointed out the synergistic activity of chitosan and AgNPs to reduce the growth of S. aureus, E. coli, S. epidermidis, P. aeruginosa strains and to break apart mature biofilms. Finally, biocompatibility assays on keratinocytes and fibroblasts did not prove any harmful effects on the viability of cells. This novel technique enables the production of bioactive membranes with great potential for the treatment of non-healing wounds.

The present manuscript addresses the description of binary systems of hyaluronan (HA) and alginate (Alg) in semi-concentrated solution. The two polysaccharides were completely miscible in the entire range of relative weight fraction explored at a total polymer concentration of up to 3 % (w/V). The rheological study encompassed steady flow and mechanical spectra for HA/Alg systems at different weight fractions with hyaluronan at different molecular weights. These extensive analyses allowed us to propose a model for the molecular arrangement in solution that envisages a mutual exclusion between the two polysaccharides even though a clear phase separation does not occur. This result may have profound implications when biomaterials based on the combination of alginate and hyaluronan are proposed in the field of biomedical materials.

Biostable fiber-reinforced composites, based on bisphenol-A-dimethacrylate and triethyleneglycoldimethacrylate thermoset polymer matrix reinforced with E-glass fibers have been successfully used in cranial reconstructions and the material has been approved for clinical use. As a further refinement of these implants, antimicrobial, non-cytotoxic coatings on the composites were created by an immersion procedure driven by strong electrostatic interactions. Silver nanoparticles (nAg) were immobilized in lactose-modified chitosan (Chitlac) to prepare the bacteriostatic coatings. Herein, we report the use of inkjet technology (a drop-on-demand inkjet printer) to deposit functional Chitlac-nAg coatings on the thermoset substrates. Characterization methods included scanning electron microscopy, scanning white light interferometry and electro-thermal atomic absorption spectroscopy. Inkjet printing enabled the fast and flexible functionalization of the thermoset surfaces with controlled coating patterns. The coatings were not impaired by the printing process: the kinetics of silver release from the coatings created by inkjet printing and conventional immersion technique was similar. Further research is foreseen to optimize printing parameters and to tailor the characteristics of the coatings for specific clinical applications.

The objective of the paper is to show the very important biophysical concepts that have been developed with polysaccharides. In particular, an attempt will be made to relate “a posteriori” the fundamental aspects, both experimental and theoretical, with some industrial applications of polysaccharide-based materials. The overview of chain conformational aspects includes relationships between topological features and local dynamics, exemplified for some naturally occurring carbohydrate polymers. Thus, by using simulation techniques and computational studies, the physicochemical properties of aqueous solutions of polysaccharides are interpreted. The relevance of conformational disorder–order transitions, chain aggregation, and phase separation to the underlying role of the ionic contribution to these processes is discussed. We stress the importance of combining information from analysis of experimental data with that from statistical–thermodynamic models for understanding the conformation, size, and functional stability of industrially important polysaccharides. The peculiar properties of polysaccharides in industrial applications are summarized for the particularly important example of nanoparticles production, a field of growing relevance and scientific interest.

Encapsulation in alginate hydrogels has been extensively used for several applications in food, pharmaceutical, and biomedical fields. The rational design of a functional polymer network is based on the identification of key parameters and mechanisms governing rate and extent of release of the immobilized molecular species. In the present work, a calorimetric study of the water evaporation under non-isothermal conditions is aimed at evaluating functional properties of a series of alginate-based gel beads. The experiments show how a number of variables, such as scan rate, calcium and alginate concentration, operational procedures, and addition of biopolymer co-solutes influence the temperature evolution of the water evaporation from beads. Given the simplicity and the rapidity of the calorimetric experiment, the issue is raised that a scaling approach could be reached by using water as reference material for the prediction of the diffusion kinetics of encapsulated molecules of variable size and properties.

Transplantation of microencapsulated insulin-secreting cells is proposed as a promising therapy for the treatment of type I diabetes mellitus. In recent years, important advances have been made in the field of immunoisolation and many studies have shown that alginate provides some major advantages for encapsulation over other systems. Since it is known that the extracellular matrix influences the behaviour of encapsulated cells, the aim of the present work has been to study the consequences of encapsulation on some cell functions. For this purpose, cell growth and dynamics of insulin release of NIT-1 cells entrapped in alginate capsules compared with those exhibited by free NIT-1 cells were investigated by means of growth curves, assays, Trypan blue staining and ELISA test. All investigations performed allowed us to conclude that alginate-entrapped NIT-1 cells maintain their growth features and secretory functions although with some important differences. In particular, alginate encapsulation affects the cellular growth profile and causes the lost of time dependence of insulin secretion profile.

Alginate has been established as a very versatile material in the preparation of hydrogel capsules for trapping therapeutic biomolecules and cells. The physico-chemical properties, the mechanism and the processing of gel formation are now well established. In the frame of a project aiming at the exploitation of encapsulation of therapeutic proteins in alginate gel particles, the procedure of preparation, characterization, gel-drying and re-hydrating has been explored for the shelf-life of the encapsulated biomolecules. Here, the results of a calorimetric study on the freezing and dehydration process of alginate micro-capsules is presented. The work aims at the description of water state(s) and its removal under “controlled conditions” in the presence of bioprotectant sugars.

A new bioactive scaffold was prepared from a binary polysaccharide mixture composed of a polyanion (alginate) and a polycation (a lactose-modified chitosan, chitlac). Its potential use for articular chondrocytes encapsulation and cartilage reconstructive surgery applications has been studied. The hydrogel combines the ability of alginate to act as a 3D supporting structure with the capability of the second component (chitlac) to provide interactions with porcine articular chondrocytes. Physico-chemical characterization of the scaffold was accomplished by gel kinetics and compression measurements and demonstrated that alginate-chitlac mixture (AC-mixture) hydrogels exhibit better mechanical properties when compared with sole alginate hydrogels. Furthermore, biochemical and biological studies showed that these 3D scaffolds are able to maintain chondrocyte phenotype and particularly to significantly stimulate and promote chondrocyte growth and proliferation. In conclusion, the present study can be considered as a first step towards an engineered, biologically active scaffold for chondrocyte in vitro cultivation, expansion, and cell delivery.

Two oppositely charged polysaccharides, alginate and a lactose-modified chitosan (chitlac), have been used to prepare dilute binary polymer mixtures at physiological pH (7.4). Because of the negative charge on the former polysaccharide and the positive charge on the latter, polyanion-polycation complex formation occurred. A complete miscibility between the two polysaccharides was attained in the presence of both high (0.15 M) and low (0.015 M) concentrations of simple 1:1 supporting salt (NaCl), as confirmed by turbidity measurements; phase separation occurred for intermediate values of the ionic strength (I). The binary solutions were further characterized by means of light scattering, specific viscosity, and fluorescence quenching measurements. All of these techniques pointed out the fundamental role of the electrostatic interactions between the two oppositely charged polysaccharides in the formation of nonstoichiometric polyelectrolyte soluble complexes in dilute solution. Fluorescence depolarization (P) experiments showed that the alginate chain rotational mobility was impaired by the presence of the cationic polysaccharide when 0.015 M NaCl was used. Moreover, upon addition of calcium, the P values of the binary polymer mixture in 0.015 M NaCl increased more rapidly than that of an alginate solution without chitlac, suggesting an efficient crowding of the negatively charged alginate chains caused by the polycation.

The present study specifically aimed at preparing and characterizing semidilute binary polymer mixtures of alginate and chitlac which might find an application in the field of cell encapsulation. A polyanion, alginate, and a polycation, a lactose-modified chitosan, were mixed under physiological conditions (pH 7.4 and NaCl 0.15) and at a semidilute concentration avoiding associative phase separation. The mutual solubility was found to be dependent on the charge screening effect of the added NaCl salt, being prevented below 0.05 M NaCl. A comparison with the behavior of the polyanion (alginate) under the same experimental conditions revealed that both the viscosity and the relaxation times of the binary polymer solutions are strongly affected by the presence of the polycation. In particular, the occurrence of electrostatic interactions between the two oppositely charged polysaccharides led to a synergistic effect on the zero-shear viscosity of the solution, which showed a 4.2-fold increase with respect to that of the main component of the solution, i.e., alginate. Moreover, the relaxation time, calculated as the reciprocal of the critical share rate, markedly increased upon reducing the alginate fraction in the binary polysaccharide solution. However, the formation of the soluble complexes and the synergistic effect are reduced upon increasing the concentration of the 1:1 electrolyte. By containing a gel-forming polyanion (alginate, e.g., with Ca(2+) ions) and a bioactive polycation (chitlac, bearing a beta-linked D-galactose), the present system can be regarded as a first step toward the development of biologically active scaffold from polysaccharide mixtures.

A chemoenzymatic strategy has been exploited to make covalently linked alginate beads with high stability. This was achieved by grafting mannuronan (alginate with 100% mannuronic acid (M)) with methacrylate moieties and then performing two enzymatic steps converting M to guluronic acid (G) in alternating sequences (MG-blocks) and in G-blocks. In this way a methacrylate grafted alginate with better gel-forming ability was achieved. Covalent bindings were introduced into the beads by using a photoinitiating system that initiated polymerization of the methacrylate moieties. The covalent links were demonstrated by beads remaining intact after treatment with EDTA. The new chemoenzymatic photocrosslinked (CEPC) beads were compatible with cells with low post-encapsulation ability like C2C12 myoblasts and human pancreatic islets. The islets continued secreting insulin after encapsulation. On contrary, cells with a high post-encapsulation proliferative ability like 293-endo cells died within 2-week post-encapsulation. The exceptional stability and the cell compatibility of the new CEPC beads make them interesting as bioreactors for delivering therapeutic proteins in future applications.

The availability of mannuronan and mannuronan C-5 epimerases allows the production of a strictly alternating mannuronate−guluronate (MG) polymer and the MG-enrichment of natural alginates, providing a powerful tool for the analysis of the role of such sequences in the calcium−alginate gel network. In view of the calcium binding properties of long alternating sequences revealed by circular dichroism studies which leads eventually to the formation of stable hydrogels, their direct involvement in the gel network is here suggested. In particular, 1H NMR results obtained from a mixed alginate sample containing three polymeric species, G blocks, M blocks, and MG blocks, without chemical linkages between the block structures, indicate for the first time the formation of mixed junctions between G and MG blocks. This is supported by the analysis of the Young's modulus of hydrogels from natural and epimerized samples obtained at low calcium concentrations. Furthermore, the “zipping” of long alternating sequences in secondary MG/MG junctions is suggested to account for the shrinking (syneresis) of alginate gels in view of its dependence on the length of the MG blocks. As a consequence, a partial network collapse, macroscopically revealed by a decrease in the Young's modulus, occurred as the calcium concentration in the gel was increased. The effect of such “secondary” junctions on the viscoelastic properties of alginate gels was evaluated measuring their creep compliance under uniaxial compression. The experimental curves, fitted by a model composed of a Maxwell and a Voigt element in series, revealed an increase in the frictional forces between network chains with increasing length of the alternating sequences. This suggests the presence of an ion mediated mechanism preventing the shear of the gel.

1-Amino-1-deoxygalactose (12%, mole) has been chemically introduced on a mannuronan sample via an N-glycosidic bond involving the uronic group of the mannuronic acid (M) residues. The unsubstituted M residues in the modified polymer were converted into guluronic moieties (G) by the use of two C-5 epimerases, resulting in an alginate-like molecule selectively modified on M residues. The molecular details of the newly formed polymer, in terms of both composition and molecular dimensions, were disclosed by use of (1)H NMR, intrinsic viscosity, and high-performance size-exclusion chromatography-multiple-angle laser light scattering (HPSEC-MALLS). Circular dichroism has revealed that the modified alginate-like polymer obtained after epimerization was able to bind calcium due to the introduction of alternating and homopolymeric G sequences. The gel-forming ability of this M-selectively modified material was tested and compared with an alginate sample containing 14% galactose introduced on G residues. Mechanical spectroscopy pointed out that the modified epimerized material was able to form stable gels and that the kinetics of the gel formation was similar to that of the unsubstituted sample. In contrast, the G-modified alginate samples showed a slower gel formation, eventually leading to gel characterized by a reduced storage modulus. The advantage of the selective modification on M residues was confirmed by measuring the Young's modulus of gel cylinders of the different samples. Furthermore, due to the high content in alternating sequences, a marked syneresis was disclosed for the modified-epimerized sample. Finally, calcium beads obtained from selectively M-modified alginate showed a higher stability than those from the G-modified alginate, as evaluated upon treatment with nongelling ions.