Search

This work explores the impact of static magnetic field (SMF) intensity on biomethane production from anaerobic digestion (AD) of sewage sludge. Two different SMF intensities (20 mT and 1.5 T) were applied to magnetize the sludge destined to the AD process. The magnetic pretreatment at 20 mT was particularly effective, as it increased biomethane production by 12.7 % compared to the control test. On the contrary, exposing the sludge to 1.5 T adversely affected biomethane production, resulting in a 15.1 % decrease. The positive correlation observed between low-intensity SMF exposure and enhanced biomethane yield, in contrast to the inhibitory effect of high-intensity SMF, suggests the existence of an optimal intensity threshold within the lower range for maximizing methane production. The impact of magnetic pretreatment on the anaerobic microbial community was investigated through high-throughput sequencing analysis of magnetized sludge samples. This approach enabled the identification of specific shifts in microbial populations associated with SMF exposure, thereby elucidating the role of SMF in modulating key microbial communities for the AD process. The findings of this study provide insights into the potential mechanisms underlying these responses and underscore the potential of SMF application for improving the anaerobic valorization of sewage sludge., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Anaerobic digestion (AD) is a sustainable and well-established option to handle sewage sludge (SS), as it generates a methane-rich biogas and a digestate with potential fertilizing properties. In the past, different strategies have been proposed to enhance the valorization of SS. Among these, the application of a static magnetic field (SMF) has been poorly evaluated. This study aims to determine the effects of a high-intensity SMF (1.5 and 2 T) on the chemical composition of SS anaerobic digestate. Several strategies (i.e., number of magnetization cycles, addition of different sources and quantities of magnesium, and digestate aeration) have been applied to evaluate the possible formation of compounds with valuable fertilizing properties in the digestate. Experimental results showed that by combining different strategies promoting digestate exposure to the magnetic field it is possible to favour the reduction in the liquid phase of NH 4 + , NO 3 - , PO 4 3- , SO 4 2- and Mg 2+ concentrations up to 28%, 38%, 34%, 39% and 31%, respectively. The XRD analyses conducted on the solid phase of the same magnetized digestate samples showed an increase in crystalline and amorphous phases of nitrogen and phosphorus compounds with fertilizing value, such as struvite. These results highlight that SMF application can increase the fertilizing potential of sewage sludge digestate and promote its valorization in a sustainable and circular perspective., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Phosphorus (P) is an essential element to produce feed and fertilizers but also a nonrenewable resource. Both the predicted exhaustion of phosphatic rocks and the risk of eutrophication lead to an increasing necessity for P recovery methodologies to be applied in municipal wastewater treatment plants (WWTPs). One of the most promising solutions involves the precipitation of P-based minerals reusable as slow-release fertilizers. In this study, P recovery as struvite and hydroxyapatite from a municipal WWTP digestate liquid fraction (centrate) was investigated at varying pH (8-10), reagent typologies (MgCl 2 , NaOH, Ca(OH) 2 , and CaCl 2 ), and concentrations under limiting magnesium doses through liquid- and solid-phase analyses and thermodynamical modeling. A maximum P recovery of 87.3% was achieved at pH 9 by adding NaOH and MgCl 2 at a dose of 656 mg/L (the higher tested). According to these data, it was estimated that 92.0 tons/year of struvite and 33.2 tons/year of hydroxyapatite could be recovered from the WWTP centrate with a cost for reagent consumption being almost 50% of the mean P market value. An increase in P precipitation was observed while comparing experiments with the same pH values but with a higher Mg 2+ dose. Ca 2+ addition led to extensive P precipitation but mainly as amorphous phases that interfere with struvite formation., (© 2022 The Authors. Journal of Environmental Quality © 2022 American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America.)

The increase in concrete structures' durability is a milestone to improve the sustainability of buildings and infrastructures. In order to ensure a prolonged service life, it is necessary to detect the deterioration of materials by means of monitoring systems aimed at evaluating not only the penetration of aggressive substances into concrete but also the corrosion of carbon-steel reinforcement. Therefore, proper data collection makes it possible to plan suitable restoration works which can be carried out with traditional or innovative techniques and materials. This work focuses on building heritage and it highlights the most recent findings for the conservation and restoration of reinforced concrete structures and masonry buildings.

Stroke is defined as an acute cerebrovascular accident characterized by an interruption of vascular supply lasting more than 24 hours. Therapeutic goal, reassumed at the well-known "time is brain", is strictly focused on achieving timely restoration of cerebral blood flow at risk of infarction to reduce neurological complications. Consequently, time to treatment is the most important determinant of the efficacy of reperfusion. Current guidelines strongly recommend the use of intravenous thrombolysis with tissue plasminogen activator and endovascular thrombectomy to reach that goal. These therapies allow to obtain 1.9 million neurons saved per each minute of onset-to-reperfusion time and 4.2 days of extra healthy life and are crucial in the reduction of mortality and morbidity of ischemic stroke. Multidisciplinary collaboration involving a coordinated prehospital management and stroke team composed of physicians with expertise in emergency medicine, neurologists, radiologists, nurses, technicians, and laboratory personnel are essential for rapid triage and should guide clinical decisions to deliver the appropriate reperfusion therapy for each patient., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

The simultaneous removal of nitrate (15 mg N-NO 3 - L -1 ) and phosphate (12 mg P-PO 4 3- L -1 ) from nutrient-polluted synthetic water was investigated in a recirculated pyrite-packed biofilter (RPPB) under hydraulic retention time (HRT) ranging from 2 to 11 h. HRT values ≥ 8 h resulted in nitrate and phosphate average removal efficiency (RE) higher than 90% and 70%, respectively. Decrease of HRT to 2 h significantly reduced the RE of both nitrogen and phosphorus. The RPPB showed high resiliency as reactor performance recovered immediately after HRT increase to 5 h. Solid-phase characterization of pyrite granules and backwashing material collected from the RPPB at the end of the study revealed that iron-phosphate, -hydroxide and -sulfate precipitated in the bioreactor. Thermodynamic modeling predicted the formation of S 0 during the study. Residence time distribution tests showed semi-complete mixing hydrodynamic flow conditions in the RPPB. The RPPB can be considered an elegant and low-cost technology coupling biological nitrogen removal to the recovery of phosphorus, iron and sulfur via chemical precipitation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The recovery of iron and other heavy metals by the formation of Fe(III) (hydr)oxides is an important application of microbially-driven processes. The mineral characterization of the precipitates formed during Fe(II)-mediated autotrophic denitrification with and without the addition of Cu, Ni, and Zn by four different microbial cultures was investigated by X-ray fluorescence (XRF), Raman spectroscopy, scanning electron microscopy equipped with energy dispersive X-Ray analyzer (SEM-EDX), Fourier transform infrared spectroscopy (FTIR) and X-ray Powder Diffraction (XRD) analyses. Fe(II)-mediated autotrophic denitrification resulted in the formation of a mixture of Fe(III) (hydr)oxides composed of amorphous phase, poorly crystalline (ferrihydrite) and crystalline phases (hematite, akaganeite and maghemite). The use of a Thiobacillus-dominated mixed culture enhanced the formation of akaganeite, while activated sludge enrichment and the two pure cultures of T. denitrificans and Pseudogulbenkiania strain 2002 mainly resulted in the formation of maghemite. The addition of Cu, Ni and Zn led to similar Fe(III) (hydr)oxides precipitates, probably due to the low metal concentrations. However, supplementing Ni and Zn slightly stimulated the formation of maghemite. A thermal post-treatment performed at 650 °C enhanced the crystallinity of the precipitates and favored the formation of hematite and some other crystalline forms of Fe associated with P, Na and Ca., (Copyright © 2019 Elsevier B.V. All rights reserved.)

To be suitable as electrolytes in intermediate temperature solid oxide fuel cell (IT-SOFC), ceramic precursors have to be characterized by high sintering aptitude for producing fully densified products which are needed for this kind of application. Therefore, synthesis processes able to prepare highly reactive powders with low costs are noteworthy to be highlighted. It has been shown that amorphous coprecipitates based on cerium doped (and codoped) hydrated hydroxycarbonates can lead to synthesized ceramics with such desired characteristics. These materials can be prepared by adopting a simple coprecipitation technique using ammonium carbonate as precipitating agent. As a function of both the molar ratio between carbonate anions and total metallic cations, and the adopted mixing speed, the coprecipitate can be either amorphous, owning a very good morphology, or crystalline, owning worse morphology, packing aptitude, and sinterability. The amorphous powders, upon a mild calcination step, gave rise to the formation of stable solid solutions of fluorite-structured ceria maintaining the same morphology of the starting powders. Such calcined powders are excellent precursors for sintering ceramic electrolytes at low temperatures and with very high electrical conductivity in the intermediate temperature range (i.e., 500⁻700 °C). Therefore, irrespective of the actual composition of ceria-based systems, by providing an accurate control of both chemical conditions and physical parameters, the coprecipitation in the presence of ammonium carbonate can be considered as one of the most promising synthesis route in terms of cost/effectiveness to prepare excellent ceramic precursors for the next generation of IT-SOFC solid electrolytes.

The paper represents the "state of the art" on sustainability in construction materials. In Part 1 of the paper, issues related to production, microstructures, chemical nature, engineering properties, and durability of mixtures based on binders alternative to Portland cement were presented. This second part of the paper concerns the use of traditional and innovative Portland-free lime-based mortars in the conservation of cultural heritage, and the recycling and management of wastes to reduce consumption of natural resources in the production of construction materials. The latter is one of the main concerns in terms of sustainability since nowadays more than 75% of wastes are disposed of in landfills.

This review presents "a state of the art" report on sustainability in construction materials. The authors propose different solutions to make the concrete industry more environmentally friendly in order to reduce greenhouse gases emissions and consumption of non-renewable resources. Part 1-the present paper-focuses on the use of binders alternative to Portland cement, including sulfoaluminate cements, alkali-activated materials, and geopolymers. Part 2 will be dedicated to traditional Portland-free binders and waste management and recycling in mortar and concrete production.

Recyclable aggregates of mesoporous titania with different anatase-rutile ratios have been prepared by thermal treatments of either amorphous or peptized precursors. These last two have been obtained by hydrolysis of either Ti(OC₂H₅)₄ or of Ti(OC₂H₅)₄ in mixture with 5 mol % Zr(OC₃H₇)₄ at room temperature in the presence of NH₄OH as a catalyzing agent. The anatase-rutile ratio, the recyclable aggregates of the nano-sized particles, the mesoporosity, the surface area and the crystallinity of the resulting crystallized products of titania can be controlled by the synthesis parameters including: concentration of ammonia catalyst, stirring time and concentration of the peptizing HNO₃, drying method of peptized precursors, calcination temperature, and finally the ramp rate up to the titania crystallization temperature. A broad range of synthesis parameters control the crystal sizes of titania particles produced. This allows catalyst preparation with very different crystal size, surface area, anatase to rutile crystal ratio and various mesoporous structures. Drying by lyophilization of precursors reduce the aggregation of the primary particles giving micro-/macroporous structures., Competing Interests: The authors declare no conflict of interest.

Magnetite nanoparticles (Fe₃O₄) represent the most promising materials in medical applications. To favor high-drug or enzyme loading on the nanoparticles, they are incorporated into mesoporous materials to form a hybrid support with the consequent reduction of magnetization saturation. The direct synthesis of mesoporous structures appears to be of interest. To this end, magnetite nanoparticles have been synthesized using a one pot co-precipitation reaction at room temperature in the presence of different bases, such as NaOH, KOH or (C₂H₅)₄NOH. Magnetite shows characteristics of superparamagnetism at room temperature and a saturation magnetization (Ms) value depending on both the crystal size and the degree of agglomeration of individual nanoparticles. Such agglomeration appears to be responsible for the formation of mesoporous structures, which are affected by the pH, the nature of alkali, the slow or fast addition of alkaline solution and the drying modality of synthesized powders.

Background: Indications to the implantable cardioverter-defibrillator (ICD) have been expanded in the last decade, including patients suffering from heart disease with or without functional disorders. Accordingly, the increasing number of patients with ICD is posing relevant legal implications. Currently, the Medical Committee that evaluates the legal criteria for disability is employing guidelines referring only to pacemaker devices and not to ICD. The aim of this study was to propose new indications for patients with ICD to replace the current criteria., Methods: The study included 219 patients (83% male, mean age 63 years) with ICD who were administered an anonymous questionnaire to evaluate the presence of any disability. Most patients were suffering from ischemic or non-ischemic dilated heart disease (41% and 34%, respectively). Single- and dual-chamber ICD (72%) were more frequently implanted compared to biventricular ICD (28%)., Results: A higher percentage of disability was found in older patients (69 +/- 14 years) with ischemic heart disease (61%) and single- or dual-chamber ICD before ICD implantation. Conversely, a lower percentage of disability was found in younger patients (53 +/- 15 years), active workers (44%), without ischemic or non-ischemic dilated heart disease (36%), and with a lower number of biventricular ICD (22%) after ICD implantation., Conclusions: Overall, these data show that disability is currently recognized because of the presence of ICD rather than the underlying heart disease. We propose, therefore, new criteria that include the impact of the underlying heart disease for a better evaluation of disability in patients with ICD.

Restrictive lung disease is often first detected when patients complain of dyspnea on exertion. Many forms of exercise testing are available, from simple hallway oximetry to the more formal and more complex cardiopulmonary exercise test. Although the use of exercise for diagnosis, treatment, and predicting outcomes is largely understudied in this population, it has recently been shown to be of value in some settings. Exercise testing may be a valuable diagnostic tool in determining the extent of lung disease in sarcoidosis. Medinger et al. reported that the symptom-limited exercise test detected pulmonary dysfunction earlier than history, physical examination, chest radiography, and spirometry alone. Furthermore, Delobbe et al. noted that in patients with biopsy-proved sarcoidosis, cardiopulmonary exercise testing was a more sensitive indicator of early lung disease than pulmonary function tests. The American College of Chest Physicians/American Thoracic Society have published an updated consensus statement for cardiopulmonary exercise testing. Christensen et al. reported that patients with restrictive lung disease may be at risk for hypoxemia with light exercise while on an airplane, and suggest that these patients be considered for in-flight oxygen therapy. Lastly, Herridge and the Canadian Critical Care Trial Group used the 6-minute walk test to prove that survivors of acute respiratory distress syndrome have significant functional limitation 1 year after discharge from the intensive care unit largely secondary to neuromuscular sequelae. Exercise testing appears to be a valuable tool in evaluating, treating, and predicting outcomes in patients with restrictive lung disease. Further study will help to support its use in other restrictive lung diseases.