Search

Mycoplasma (M.) bovis, the agent of mastitis, pneumonia, and arthritis in cattle, harbors a small genome of approximately 1 Mbp. Combining data from Illumina and Nanopore technologies, we sequenced and assembled the genomes of 35 European strains and isolate DL422_88 from Cuba. While the high proportion of repetitive structures inM. bovisgenomes represents a particular challenge, implementation of our own pipelineMycovista(available on GitHubwww.github.com/sandraTriebel/mycovista) in a hybrid approach enabled contiguous assembly of the genomes and, consequently, improved annotation rates considerably. To put our European strain panel in a global context, we analyzed the new genome sequences together with 175 genome assemblies from public databases. Construction of a phylogenetic tree based on core genes of these 219 strains revealed a clustering pattern according to geographical origin, with European isolates positioned on clades 4 and 5. Genomic data allowing assignment of strains to tissue specificity or certain disease manifestations could not be identified. Seven strains isolated from cattle with systemic circular condition (SCC), still a largely unknown manifestation ofM. bovisdisease, were located on both clades 4 and 5. Pairwise association analysis revealed 108 genomic elements associated with a particular clade of the phylogenetic tree. Further analyzing these hits, 25 genes are functionally annotated and could be linked to aM. bovisprotein, e.g. various proteases and nucleases, as well as ten variable surface lipoproteins (Vsps) and other surface proteins. These clade-specific genes could serve as useful markers in epidemiological and clinical surveys.

In the original publication [...]

Agriculture accounts for 80% of global freshwater consumption but the environmental impacts of water use are highly localized and depend on water scarcity. The water use impacts of food production should be a key consideration of sustainable diets, yet little is known of the water scarcity demands of diets, especially of individuals. Here we estimate the water scarcity footprint (WSF)—a water use impact metric that accounts for regional scarcity—of individual diets in the United States (n = 16,800) and find a fivefold variation between the highest and lowest quintile of diets ranked by WSF. Larger intakes of some meat, fruit, nuts and vegetables drive these differences. Meat consumption is the greatest contributor (31%) to the WSF of the average diet, and within that, beef contributes about six times that of chicken. Variation between substitutable foods provides insight into diet shifts that can reduce WSF. We introduce a novel, geospatially explicit approach that combines the types and quantities of foods in the diets of individuals, the irrigation water required to produce those foods and the relative scarcity of water where that irrigation occurs. Environmental impacts of water use affect the sustainability of food production. The impacts of water use associated with self-selected diets in the United States are estimated here based on the types and quantities of foods in the diet, the irrigation water required to produce those foods and the relative scarcity of water in the regions where that irrigation occurs. Food substitutions offer opportunities to reduce these water impacts.

Tissue engineering is a method of growing importance regarding clinical application in the genitourinary region. One of the key factors in successfully development of an artificially tissue engineered mucosa equivalent (TEOM) is the optimal choice of the scaffold. Collagen scaffolds are regarded as gold standard in dermal tissue reconstruction. Four distinct collagen scaffolds were evaluated for the ability to support the development of an organotypical tissue architecture. TEOMs were established by seeding cocultures of primary oral epithelial cells and fibroblasts on four distinct collagen membranes. Cell viability was assessed by MTT-assay. The 3D architecture and functionality of the tissue engineered oral mucosa equivalents were evaluated by confocal laser-scanning microscopy and immunostaining. Cell viability was reduced on the TissuFoil E® membrane. A multi-stratified epithelial layer was established on all four materials, however the TEOMs on the Bio-Gide® scaffold showed the best fibroblast differentiation, secretion of tenascin and fibroblast migration into the membrane. The TEOMs generated on Bio-Gide® scaffold exhibited the optimal cellular organization into a cellular 3D network. Thus, the Bio-Gide® scaffold is a suitable matrix for engineering of mucosa substitutes in vitro.

Summary Background The role of diet in health is well established and, in the past decade, more attention has been given to the role of food choices in the environment. The agricultural sector produces about a quarter of the world's greenhouse gas emissions (GHGE), and meat production, especially beef, is an important contributor to global GHGE. Our study aimed to address a fundamental gap in the diet-climate literature: identifying consumers who are receptive to making dietary changes, and the effect of their potential changes on GHGE, diet healthfulness, and diet costs. Methods Dietary data on US individuals from a nationally representative survey were linked to food-related GHGE. We identified individuals receptive to changing their diets (potential changers) as those who reported trying US dietary guidance and were likely to agree that humans contribute to climate change. We assessed GHGE, diet healthfulness measured by the Healthy Eating Index (HEI), and diet costs before and after hypothetical changes replacing either beef or meats with poultry or plant-protein foods. Findings Our sample comprised 7188 individuals, of whom 16% were potential changers. These were disproportionately women, highly educated, or had higher income compared with individuals deemed not likely to change. Replacing 100% of beef intake in potential changers with poultry reduced mean dietary GHGE by 1·38 kg CO2-equivalents per person per day (95% CI 1·19–1·58), a 35·7% decrease. This replacement also increased mean HEI by 1·7% and reduced mean diet costs by 1·7%. We observed the largest changes when replacing all beef, pork, or poultry intake with plant-protein foods (GHGE decreased by 49·6%, mean HEI increased by 8·7%, and dietary costs decreased by 10·5%). Hypothetical replacements in the potential changers alone resulted in whole population reductions in 1-day dietary GHGE of 1·2% to 6·7%, equivalent to 22–126 million fewer passenger vehicle km. Interpretation Individual-level diet studies that include a variation in response by consumers can improve our understanding of the effects of climate policies such as those that include sustainability information in national dietary guidance. In our study, we found that changes by a small percentage of motivated individuals can modestly reduce the national dietary GHGE. Moreover, these substitutions can modestly improve diet healthfulness and reduce diet costs for individuals who make these changes. Funding Wellcome Trust.

Objectives Porcine-derived collagen matrices (CM) can be used for oral tissue regeneration, but sufficient revascularization is crucial. The aim of this study was to analyze the influence of platelet-rich fibrin (PRF) on angiogenesis of different CM in vitro and in vivo. Materials and methods Three different CM (mucoderm, jason, collprotect) were combined with PRF in a plotting process. Growth factor release (VEGF, TGF-β) was measured in vitro via ELISA quantification after 1,4 and 7 days in comparison to PRF alone. In ovo yolk sac (YSM) and chorion allantois membrane (CAM) model, angiogenic potential were analyzed in vivo with light- and intravital fluorescence microscopy after 24 h, then verified with immunohistochemical staining for CD105 and αSMA. Results Highest growth factor release was seen after 24 h for all three activated membranes in comparison to the native CM (VEGF 24 h: each p p 2: each p 2: each p p p p Conclusions PRF improved the angiogenesis of CM in vitro and in vivo. Clinical relevance Bio-functionalization of CM with PRF could easily implemented in the clinical pathway and may lead to advanced soft tissue healing.

Fetal calf serum (FCS) is used for in vitro cell culture, as it provides the cells with various growth-promoting compounds. For applications in humans, FCS does not meet the required safety standards and should be replaced by an appropriate substitute. This study analyzed the suitability of using human platelet lysate (hPL) as a substitute for FCS in endothelial cell cultures for in vitro and in vivo tissue engineering applications. The focus was placed on standardized, commercially available hPLs (MultiPL’30, MultiPL’100), which are approved for applications in humans, and compared to laboratory-prepared hPLs (lp-hLP). Human umbilical vein endothelial cells (HUVEC) were cultured with FCS or with different hPLs. Cell morphology, proliferation, viability, apoptosis, and necrosis, as well as the organization of vascular structures, were assessed. No morphological changes were noticed when FCS was replaced by standardized hPLs in concentrations of 1-10%. In contrast, the use of lp-hLPs led to irregular cell shape and increased vacuolization of the cytoplasm. HUVEC proliferation and viability were not compromised by using media supplemented with standardized hPLs or pl-hPLs in concentrations of 1-10%, compared to cells grown in media supplemented with 20% FCS. The apoptosis rate using lp-hPLs was higher compared to the use of standardized hPLs. The necrosis rate tended to be lower when FCS was replaced by hPLs. HUVEC formed more pronounced capillary-like structures when the media were supplemented with hPLs instead of supplementation with FCS. Thus, compared to the use of FCS, the use of hPLs was beneficial for the growth and optimal expression of functional endothelial cell characteristics during in vitro experiments. Commercially available hPLs proved to be particularly suitable, as they led to reproducible results during in vitro experiments, while meeting the safety requirements for in vivo use.

In reconstructive surgery the use of prevascularized soft tissue equivalents is a promising approach for wound coverage of defects after tumor resection or trauma. However, in previous studies to generate soft tissue equivalents on collagen membranes, microcapillaries were restricted to superficial areas. In this study, to understand which factors were involved in the formation of these microcapillaries, the levels of the angiogenic factors vascular endothelial growth factor (VEGF), Interleukin-8 (IL-8), and basic fibroblast growth factor (bFGF) in the supernatants of the tissue equivalents were examined at various time points and conditions. Additionally, the influence of these factors on viability, proliferation, migration, and tube formation in monocultures compared to cocultures of fibroblast and endothelial cells was examined. The results showed that VEGF production was decreased in cocultures compared to fibroblast monocultures and the lowest VEGF levels were observed in endothelial cell monocultures. Additionally, the highest levels of IL-8 were observed in cocultures compared to monocultures. Similar results were observed for bFGF with lowest levels seen within the first 24 hr and highest levels in cocultures. VEGF and IL-8 were shown to promote endothelial cell viability, proliferation and migration and angiogenic parameters such as tube density, total tube length, and number of tube branches. Addition of VEGF and IL-8 to cocultures resulted in accelerated and denser formation of capillary-like structures. The results indicate that VEGF, IL-8, and bFGF strongly influence cellular behavior of endothelial cells and this information should be useful in promoting the formation of microcapillary-like structures in complex tissue equivalents.

Materials 14(21), 6659 (2021). doi:10.3390/ma14216659 special issue: "Special Issue "Low-Loss Nonoriented Electrical Steel Sheet for Energy-Efficient Electrical Drives" / Special Issue Editor Prof. Dr. Rudolf Kawalla, Guest Editor", Published by MDPI, Basel

Background: Porous polyethylene (PPE) implants are used for the reconstruction of tissue defects but have a risk of rejection in case of insufficient ingrowth into the host tissue. Various growth factors can promote implant ingrowth, yet a long-term gradient is a prerequisite for the mediation of these effects. As modification of the implant surface with nanocarriers may facilitate a long-term gradient by sustained factor release, implants modified with crosslinked albumin nanocarriers were evaluated in vivo. Methods: Nanocarriers from murine serum albumin (MSA) were prepared by an inverse miniemulsion technique encapsulating either a low- or high-molar mass fluorescent cargo. PPE implants were subsequently coated with these nanocarriers. In control cohorts, the implant was coated with the homologue non-encapsulated cargo substance by dip coating. Implants were consequently analyzed in vivo using repetitive fluorescence microscopy utilizing the dorsal skinfold chamber in mice for ten days post implantation. Results: Implant-modification with MSA nanocarriers significantly prolonged the presence of the encapsulated small molecules while macromolecules were detectable during the investigated timeframe regardless of the form of application. Conclusions: Surface modification of PPE implants with MSA nanocarriers results in the alternation of release kinetics especially when small molecular substances are used and therefore allows a prolonged factor release for the promotion of implant integration.

Despite the urgent need for comprehensive food systems strategies, the challenge lies in defining feasible, evidence-based intervention points. Too little is known about issues food systems decision-makers and other change agents are running up against, particularly in low- and middle-income countries where food systems are the most vulnerable to a growing number of intertwined crises. We look at this question through the lens of sustainable diets, a growing area of research and a concept that is the basis of over 30 sets of national guidelines that aim to simultaneously address health, economic and environmental dimensions of food systems. Based on 114 interviews carried out in Kenya and Vietnam, we examine the extent to which food systems researchers, business and project managers and policy actors are attempting to intervene in food systems in ways that mirror the concept of sustainable diets. We also consider how they are managing two key ingredients that are critical to systems-change—interdisciplinary data and cross-sector collaboration. Most stakeholders we interviewed were carrying out systems-based projects, oriented—even if not explicitly—around many of the sustainable diets domains: agriculture, livelihoods, food security/access/nutrition and/or environment. The majority faced formidable challenges with both data and collaborations, however, showing why it can be so difficult to move from normative ideals like “sustainable diets” to practical realities, regardless of the context. To support more comprehensive food systems policies and interventions, our findings suggest the need for strategies that can improve the collection and accessibility of actionable, cross-sector data, and mechanisms to overcome institutional barriers that limit collaboration.

This study analyzed the influence of titanium (TiO2 ) surface modifications with two osteogenic proteins (BMP-2, BMP-7) and an anti-osteoclastic drug (alendronic acid [AA]) on sandblasted/acid-etched (SLA) and plain TiO2 (PT) on cell adhesion, proliferation and differentiation (alkaline phosphatase [AP] and osteocalcin [OC]) of bone-marrow derived stem cells (BMSCs) after 1, 3 and 7 days in-vitro. Initially, AA surfaces showed the highest cell number and surface coverage. At day 3 and 7, BMP and AA-modified surfaces exhibited a significantly enhanced cell growth. For proliferation, at days 3 and 7, an enhancement on BMP-2, BMP-7 and AA-surfaces was seen. At day 7, SLA also showed a higher proliferation when compared to PT. Initially, AP expression was elevated on SLA and AA surfaces. At days 3 and 7, a significant increased AP expression was seen for SLA, BMP-2, BMP-7 and AA discs. For OC, SLA and AA surfaces had the highest expression after 1 day whereas after 3 and 7 days a significant difference was recorded for SLA, BMP-2, BMP-7 and AA. In conclusion, a beneficial biological effect of a chemical immobilization method of BMP-2, BMP-7 and alendronate onto titanium surfaces on BMSCs was proven.

Sustainable diets are an environmental, economic, and public health imperative, but identifying clear intervention points is challenging. Decision-making will require descriptive analyses from a variety of perspectives, even under the inevitable uncertainty introduced by limited data. This study uses existing data to provide a diet-level perspective on environmental impact from food production in the case study countries of Vietnam and Kenya. FAO food supply data at decadal time steps were used as a proxy for national average diets in Vietnam and Kenya. We combined these data with estimates of the greenhouse gas emissions (GHGE) and water use impact associated with producing food commodities. Generic GHGE factors were derived from a survey of the life cycle assessment literature. Country- and commodity-specific blue water use estimates were used, reflecting country-of-origin for import-dominated commodities. The AWARE characterization model was used to offer a diet-associated water scarcity footprint. Trends in diet-associated environmental impacts were interpreted in light of diet shifts, economic development trends, and other factors. Increasing per capita food supply in Vietnam, and in particular increases in meat, have led to rising diet-associated per capita GHGE. While supply of beef remains 5.2 times smaller than pork—the dominant meat—increases in beef demand in the past decade have resulted in it becoming second only to rice in contribution to diet GHGE. The water use and water scarcity footprint in Vietnam follow an increasing trend comparable to food supply. On the other hand, historically consistent levels of dairy and beef in Kenya dominate diet-level GHGE. Water use associated with the Kenyan diet shows marked increases between the 1990s and 2000s due to imports of wheat and rice from water-stressed regions. Environmental performance data for characteristic food production systems in these and other developing countries are needed to improve the representativeness and reliability of such assessments. Despite data limitations, the methods and results presented here may offer a fresh perspective in sustainable development policy deliberations, as they offer an entry point to linking environmental impact and consumption behaviors and can elucidate otherwise obscure or unexpected outcomes. A clear need emerges for further environmental analysis of dominant production systems within both Vietnam and Kenya.

We illustrate a reliable and accelerated isolation routine for mucosal epithelial cells, which thereupon can be used for soft tissue engineering. This is highly important in the field of soft tissue engineering because mucosal equivalents are frequently usable in several surgical fields like gynecology, urology, otorhinolaryngology, ophthalmology, maxillofacial surgery, and many others. In this context the isolation of mucosal epithelial cells suitable for tissue engineering is mandatory. The reliable cultivation of mucosal or skin epithelial cells is challenging and there is currently no reproducible method. We demonstrate a solution for this problem by developing an accelerated and nevertheless reliable method.

Background A substantial portion of greenhouse gas emissions (GHGE) has been attributed to the food sector, but little is known about the association between the carbon footprint of individual self-selected diets in the United States and nutritional quality. Objectives The aims of this study were to assess the GHGE from individual self-selected diets in the United States and examine their association with nutritional quality of the diets, demographic patterns, and food-related behaviors. Methods The dietary GHGE from US adults (>18 y, N = 16,800) in the 2005–2010 National Health and Nutrition Examination Survey (NHANES) were calculated by linking all foods consumed in their 24-h recall diets to our new database of food environmental impacts. Diets were ranked by GHGE/1000 kcal. Those in the top and bottom quintiles were compared on the US Healthy Eating Index (HEI) and on the amounts of specific nutrients known to be under- or overconsumed in the US population. Demographic and behavioral variables from the NHANES were also correlated to these dietary carbon footprints. Results Diets in the bottom quintile accounted for one-fifth the total emissions (GHGE/1000 kcal) of those in the top quintile, yet had significantly higher (P

Background Do the environmental impacts inherent in national food-based dietary guidelines (FBDG) vary around the world, and, if so, how? Most previous studies that consider this question focus on a single country or compare countries’ guidelines without controlling for differences in country-level consumption patterns. To address this gap, we model the carbon footprint of the dietary guidelines from seven different countries, examine the key contributors to this, and control for consumption differences between countries. Methods In this purposive sample, we obtained FBDG from national sources for Germany, India, the Netherlands, Oman, Thailand, Uruguay, and the United States. These were used to structure recommended diets using 6 food groups: protein foods, dairy, grains, fruits, vegetables, and oils/fats. To determine specific quantities of individual foods within these groups, we used data on food supplies available for human consumption for each country from the UN Food and Agriculture Organization’s food balance sheets. The greenhouse gas emissions (GHGE) used to produce the foods in these consumption patterns were linked from our own database, constructed from an exhaustive review of the life cycle assessment literature. All guidelines were scaled to a 2000-kcal diet. Results Daily recommended amounts of dairy foods ranged from a low of 118 ml/d for Oman to a high of 710 ml/d for the US. The GHGE associated with these two recommendations were 0.17 and 1.10 kg CO2-eq/d, respectively. The GHGE associated with the protein food recommendations ranged from 0.03 kg CO2-eq/d in India to 1.84 kg CO2-eq/d in the US, for recommended amounts of 75 g/d and 156 g/d, respectively. Overall, US recommendations had the highest carbon footprint at 3.83 kg CO2-eq/d, 4.5 times that of the recommended diet for India, which had the smallest footprint. After controlling for country-level consumption patterns by applying the US consumption pattern to all countries, US recommendations were still the highest, 19% and 47% higher than those of the Netherlands and Germany, respectively. Conclusions Despite our common human biology, FBDG vary tremendously from one country to the next, as do the associated carbon footprints of these guidelines. Understanding the carbon footprints of different recommendations can assist in future decision-making to incorporate environmental sustainability in dietary guidance.

Mycoplasmas are minute bacteria controlled by very small genomes ranging from 0.6 to 1.4 Mbp. They lack a cell wall and have been suggested to have progressed through reductive evolution from phylogenetically closely related Clostridia. They are known to colonize the respiratory tract or the urogenital tract among other organs and can cause chronic and subclinical diseases associated with long persistence of the causative agent. Toxin-antitoxin systems (TAS) are genetic elements that have been described for several respiratory and urogenital pathogens as well as for Clostridia, but never for pathogenic mycoplasmas. Here we describe for the first-time different types of TAS in a Mycoplasma pathogen, namely M. mycoides subsp. capri. We identified candidate TAS in silico via TASmania database. Two candidate TAS identified in silico and another candidate TAS suggested in a minimal cell based on transposon mutagenesis were systematically tested for their functionality in hosts with different phylogenetic distance using heterologous expression. Phylogenetic distance of the host used for heterologous expression influenced the outcome of the functional testing. We corroborated functionality of the three candidate TAS in Mycoplasma capricolum subsp. capricolum. Moreover, we confirmed transcription and translation of molecules of the TAS investigated during in vitro growth. We sequence analyzed 15 genomes of M. mycoides subsp. capri and revealed an unequal distribution of the TAS studied pointing towards dynamic gain and loss of TAS within the species.Author summaryMycoplasmas have a minimal genome and have never been shown to possess TAS. In this work we showed the presence of different functional TAS systems in Mycoplasma mycoides subsp. capri, a caprine pathogen for the first time. Sequence analysis of a number of Mycoplasma mycoides subsp. capri strains revealed a plasticity of the genome with respect to TAS carriage. This work paves the way to investigate the biological role of TAS (e.g. persistence, stress tolerance) during infection using mycoplasmas as a simple model organism. Since most mycoplasmas lack classical virulence factors such as exotoxins and go into a kind of stealth mode to evade the immune system, TAS are likely to contribute to the parasitic lifestyle of mycoplasmas and should be investigated in that respect. The availability of synthetic genomics tools to modify a range of Mycoplasma pathogens and well-established challenge models for the latter mycoplasmas will foster future research on TAS in mycoplasmas.

The behaviour of many materials is strongly influenced by the mechanical properties of hard phases, present either from deliberate introduction for reinforcement or as deleterious precipitates. While it is, therefore, self-evident that these phases should be studied, the ability to do so&mdash, particularly their plasticity&mdash, is hindered by their small sizes and lack of bulk ductility at room temperature. Many researchers have, therefore, turned to small-scale testing in order to suppress brittle fracture and study the deformation mechanisms of complex crystal structures. To characterise the plasticity of a hard and potentially anisotropic crystal, several steps and different nanomechanical testing techniques are involved, in particular nanoindentation and microcompression. The mechanical data can only be interpreted based on imaging and orientation measurements by electron microscopy. Here, we provide a tutorial to guide the collection, analysis, and interpretation of data on plasticity in hard crystals. We provide code collated in our group to help new researchers to analyse their data efficiently from the start. As part of the tutorial, we show how the slip systems and deformation mechanisms in intermetallics such as the Fe7Mo6 &mu, phase are discovered, where the large and complex crystal structure precludes determining a priori even the slip planes in these phases. By comparison with other works in the literature, we also aim to identify &ldquo, best practises&rdquo, for researchers throughout to aid in the application of the methods to other materials systems.

Materials 14(22), 7055 (2021). doi:10.3390/ma14227055 special issue: "Special Issue "Low-Loss Nonoriented Electrical Steel Sheet for Energy-Efficient Electrical Drives" / Special Issue Editor: Prof. Dr. Rudolf Kawalla, Guest Editor", Published by MDPI, Basel

Materials 14(21), 6588 (2021). doi:10.3390/ma14216588 special issue: "Special Issue "Low-Loss Nonoriented Electrical Steel Sheet for Energy-Efficient Electrical Drives" / Special Issue Editor: Prof. Dr. Rudolf Kawalla, Guest Editor", Published by MDPI, Basel

Materials 14(22), 6822 (2021). doi:10.3390/ma14226822 special issue: "Special Issue "Low-Loss Nonoriented Electrical Steel Sheet for Energy-Efficient Electrical Drives" / Special Issue Editor: Prof. Dr. Rudolf Kawalla, Guest Editor", Published by MDPI, Basel

Human diets and their associated environmental impacts differ across segments of the population. There is evidence that consumer choices of food intake can also affect the overall environmental impacts of a food system. This paper analyzes the environmental impact of diets and food choices across a rural–urban transect in Northern Vietnam by using mixed survey data from 619 adult respondents. The average greenhouse gas emissions (GHGE) resulting from producing the daily food intake of adults in the urban and peri-urban districts were similar, while the average in the rural district was lower. Although starchy staples contributed the most to energy intake, pork and beef were the largest contributors to GHGE. Metrics of blue water use were higher for diets of males than those of females in all three districts. Interestingly, the difference in mean diet diversity score between urban and rural households was significant, and females’ diets were more diverse than those of males. As expected, urban households were more likely to buy food, while rural households often produced their own foods. Urban households reported prioritizing personal health and the natural content of food and would increase seafood and fruits if their income were to increase. In rural regions, interventions aimed at reducing undernutrition should address improving diet quality without significant increases to diet-related environmental impacts.

Contagious bovine pleuropneumonia (CBPP) is a respiratory disease caused by Mycoplasma mycoides subsp. mycoides. Infection occurs via Mycoplasma-containing droplets and therefore requires close contact between animals. The current infection models are suboptimal and based on intratracheal installation of mycoplasmas or in-contact infection. This work tested the infection of adult cattle via aerosols containing live mycoplasmas mimicking the infection of cattle in the field. Therefore, we infected six cattle with aerosolized Mycoplasma mycoides subsp. mycoides strain Afadé over seven consecutive days with altogether 109 colony forming units. All animals seroconverted between 11–24 days post infection and five out of six animals showed typical CBPP lesions. One animal did not show any lung lesions at necropsy, while another animal had to be euthanized at 25 days post infection because it reached endpoint criteria. Seroconversion confirmed successful infection and the spectrum of clinical and lesions observed mirrors epidemiological models and the field situation, in which only a fraction of animals suffers from acute clinical disease post infection.

Plasticity in body-centred cubic (BCC) metals, including dislocation interactions at grain boundaries, is much less understood than in face-centred cubic (FCC) metals. At low temperatures additional resistance to dislocation motion due to the Peierls barrier becomes important, which increases the complexity of plasticity. Iron-silicon steel is an interesting, model BCC material since the evolution of the dislocation structure in specifically-oriented grains and at particular grain boundaries have far-reaching effects not only on the deformation behaviour but also on the magnetic properties, which are important in its final application as electrical steel.In this study, two different orientations of micropillars (1, 2, 4 µm in diameter) and macropillars (2500 µm) and their corresponding bi-crystals are analysed after compression experiments with respect to the effect of size on strength and dislocation structures. Using different experimental methods, such as slip trace analysis, plane tilt analysis and cross-sectional EBSD, we show that direct slip transmission occurs, and different slip systems are active in the bi-crystals compared to their single-crystal counterparts. However, in spite of direct transmission and a very high transmission factor, dislocation pile-up at the grain boundary is also observed at early stages of deformation. Moreover, an effect of size scaling with the pillar size in single crystals and the grain size in bi-crystals is found, which is consistent with investigations elsewhere in FCC metals.

Contagious bovine pleuropneumonia (CBPP) and contagious caprine pleuropneumonia (CCPP) are major infectious diseases of ruminants caused by mycoplasmas in Africa and Asia. In contrast with the limited pathology in the respiratory tract of humans infected with mycoplasmas, CBPP and CCPP are devastating diseases associated with high morbidity and mortality. Beyond their obvious impact on animal health, CBPP and CCPP negatively impact the livelihood and wellbeing of a substantial proportion of livestock-dependent people affecting their culture, economy, trade and nutrition. The causative agents of CBPP and CCPP are Mycoplasma mycoides subspecies mycoides and Mycoplasma capricolum subspecies capripneumoniae, respectively, which have been eradicated in most of the developed world. The current vaccines used for disease control consist of a live attenuated CBPP vaccine and a bacterin vaccine for CCPP, which were developed in the 1960s and 1980s, respectively. Both of these vaccines have many limitations, so better vaccines are urgently needed to improve disease control. In this article the research community prioritized biomedical research needs related to challenge models, rational vaccine design and protective immune responses. Therefore, we scrutinized the current vaccines as well as the challenge-, pathogenicity- and immunity models. We highlight research gaps and provide recommendations towards developing safer and more efficacious vaccines against CBPP and CCPP.

Plasticity in body-centred cubic (BCC) metals, including dislocation interactions at grain boundaries, is much less understood than in face-centred cubic (FCC) metals. At low temperatures additional resistance to dislocation motion due to the Peierls barrier becomes important, which increases the complexity of plasticity. Iron-silicon steel is an interesting, model BCC material since the evolution of the dislocation structure in specifically-oriented grains and at particular grain boundaries have far-reaching effects not only on the deformation behaviour but also on the magnetic properties, which are important in its final application as electrical steel. In this study, two different orientations of micropillars (1, 2, 4 µm in diameter) and macropillars (2500 µm) and their corresponding bi-crystals are analysed after compression experiments with respect to the effect of size on strength and dislocation structures. Using different experimental methods, such as slip trace analysis, plane tilt analysis and cross-sectional EBSD, we show that direct slip transmission occurs, and different slip systems are active in the bi-crystals compared to their single-crystal counterparts. However, in spite of direct transmission and a very high transmission factor, dislocation pile-up at the grain boundary is also observed at early stages of deformation. Moreover, an effect of size scaling with the pillar size in single-crystals and the grain size in bi-crystals is found, which is consistent with investigations elsewhere in FCC metals.

Scrutiny of food packaging environmental impacts has led to a variety of sustainability directives, but has largely focused on the direct impacts of materials. A growing awareness of the impacts of food waste warrants a recalibration of packaging environmental assessment to include the indirect effects due to influences on food waste. In this study, we model 13 food products and their typical packaging formats through a consistent life cycle assessment framework in order to demonstrate the effect of food waste on overall system greenhouse gas (GHG) emissions and cumulative energy demand (CED). Starting with food waste rate estimates from the U.S. Department of Agriculture, we calculate the effect on GHG emissions and CED of a hypothetical 10% decrease in food waste rate. This defines a limit for increases in packaging impacts from innovative packaging solutions that will still lead to net system environmental benefits. The ratio of food production to packaging production environmental impact provides a guide to predicting food waste effects on system performance. Based on a survey of the food LCA literature, this ratio for GHG emissions ranges from 0.06 (wine example) to 780 (beef example). High ratios with foods such as cereals, dairy, seafood, and meats suggest greater opportunity for net impact reductions through packaging‐based food waste reduction innovations. While this study is not intended to provide definitive LCAs for the product/package systems modeled, it does illustrate both the importance of considering food waste when comparing packaging alternatives, and the potential for using packaging to reduce overall system impacts by reducing food waste.

Morphological and hemodynamic parameters have been suggested to affect the rupture of cerebral aneurysms, but detailed mechanisms of rupture are poorly understood. The purpose of our study is to determine criteria for predicting the risk of aneurysm rupture, which is critical for improved patient management. Existing aneurysm hemodynamics studies generally evaluate limited geometries or Reynolds numbers (Re), which are difficult to apply to a wide range of patient-specific cases. We focused on the association between hemodynamic characteristics and morphology. We assessed several two-dimensional (2D) and three-dimensional (3D) idealized and physiological geometries to characterize the hemodynamic landscape between flow patterns. The impact of morphology on velocity and wall shear stress (WSS) profiles were evaluated. We found that slight changes in aneurysm geometry or Re result in significant changes in the hemodynamic and WSS profiles. Our systematic mapping and non-dimensional analysis qualitatively identify hemodynamic conditions that may predispose aneurysms to rupture. This article is protected by copyright. All rights reserved.

A large body of research has explored opportunities to mitigate climate change in agricultural systems; however, less research has explored opportunities across the food system. Here we expand the existing research with a review of potential mitigation opportunities across the entire food system, including in pre-production, production, processing, transport, consumption and loss and waste. We detail and synthesize recent research on the topic, and explore the applicability of different climate mitigation strategies in varying country contexts with different economic and agricultural systems. Further, we highlight some potential adaptation co-benefits of food system mitigation strategies and explore the potential implications of such strategies on food systems as a whole. We suggest that a food systems research approach is greatly needed to capture such potential synergies, and highlight key areas of additional research including a greater focus on low- and middle-income countries in particular. We conclude by discussing the policy and finance opportunities needed to advance mitigation strategies in food systems.

Biomimetic surface modifications of titanium implants using the Arg-Gly-Asp-sequence (RGD) are promising to accelerate bone healing in cases of medical implants. Therefore, we compared the impact of linear and cyclic RGD (l- and c-RGD) covalently coupled onto titanium surfaces on the osseous response in vitro and in vivo. In vitro, osteoblasts' behaviour on different surfaces (unmodified, amino-silanized (APTES), l- and c-RGD) was analysed regarding adhesion (fluorescence microscopy), proliferation (resazurin stain) and differentiation (RT-PCR on alkaline phosphatase (AP) & osteocalcin (OC)). In vivo, osteosynthesis screws (unmodified n=8, l-RGD n=8, c-RGD n=8) were inserted into the proximal tibiae of 12 rabbits and evaluated for bone growth parameters (bone-implant-contact (BIC;%) & vertical bone apposition (VBA;%)) at 3 and 6 weeks. In vitro, c- as well as l-RGD surfaces stimulated osteoblasts' adherence, proliferation and differentiation in a similar manner, with only subtle evidence of superiority of the c-RGD modifications. In vivo, c-RGD-modifications led to a significantly increased VBA after 3 and after 6 weeks. Thus, coating with c-RGD appears to play an important role influencing osteoblasts' behaviour in vitro but especially in vivo. These findings can be applied prospectively to implantable biomaterials with hypothetically improved survival and success rates. This article is protected by copyright. All rights reserved.