Search

OBJECTIVES This study aimed to investigate the impact of mechanical factors at baseline on the patency of a restorative conduit for coronary bypass grafts in an ovine model at serial follow-up up to 1 year. METHODS The analyses of 4 mechanical factors [i.e. bending angle, superficial wall strain and minimum and maximum endothelial shear stress (ESS)] were performed in 3D graft models reconstructed on baseline (1-month) angiograms frame by frame by a core laboratory blinded for the late follow-up. The late patency was documented by Quantitative Flow Ratio (QFR®) that reflects the physiological status of the graft. The correlation between 4 mechanical factors and segmental QFR (△QFR) were analysed on 10 equal-length segments of each graft. RESULTS A total of 69 graft geometries of 7 animals were performed in the study. The highest △QFR at 12 months was colocalized in segments of the grafts with the largest bending angles at baseline. Higher △QFR at 3 months were both at the anastomotic ends and were colocalized with the highest superficial wall strain at baseline. High baseline ESS was topographically associated with higher △QFR at the latest follow-up. Correlations of minimum and maximum ESS with △QFR at 3 months were the strongest among these parameters (ρ = 0.30, 95% CI [−0.05 to 0.56] and ρ = 0.27, 95% CI [−0.05 to 0.54], respectively). CONCLUSIONS Despite the limited number of grafts, this study suggests an association between early abnormal mechanical factors and late flow metrics of the grafts. The understanding of the mechanical characteristics could help to improve this novel conduit.

Background: The Xeltis biorestorative transcatheter heart valve (BTHV) leaflets are made from an electrospun bioabsorbable supramolecular polycarbonate-urethane and are mounted on a self-expanding nitinol frame. The acute haemodynamic performance of this BTHV was favourable. Aims: We sought to demonstrate the preclinical feasibility of a novel BTHV by evaluating the haemodynamic performances of five pilot valve designs up to 12 months in a chronic ovine model. Methods: Five design iterations (A, B, B', C, and D) of the BTHV were transapically implanted in 46 sheep; chronic data were available in 39 animals. Assessments were performed at implantation, 3, 6, and 12 months including quantitative aortography, echocardiography, and histology. Results: At 12 months, greater than or equal to moderate AR on echocardiography was seen in 0%, 100%, 33.3%, 100%, and 0% in the iterations A, B, B', C, and D, respectively. Furthermore, transprosthetic mean gradients on echocardiography were 10.0±2.8 mmHg, 19.0±1.0 mmHg, 8.0±1.7 mmHg, 26.8±2.4 mmHg, and 11.2±4.1 mmHg, and effective orifice area was 0.7±0.3 cm2, 1.1±0.3 cm2, 1.5±1.0 cm2, 1.5±0.6 cm2, and 1.0±0.4 cm2 in the iterations A, B, B', C, and D, respectively. On pathological evaluation, the iteration D demonstrated generally intact leaflets and advanced tissue coverage, while different degrees of structural deterioration were observed in the other design iterations. Conclusions: Several leaflet material iterations were compared for the potential to demonstrate endogenous tissue restoration in an aortic valve in vivo. The most promising iteration showed intact leaflets and acceptable haemodynamic performance at 12 months, illustrating the potential of the BTHV.

In situ heart valve tissue engineering is an emerging approach in which resorbable, off-the-shelf available scaffolds are used to induce endogenous heart valve restoration. Such scaffolds are designed to recruit endogenous cells in vivo, which subsequently resorb polymer and produce and remodel new valvular tissue in situ. Recently, preclinical studies using electrospun supramolecular elastomeric valvular grafts have shown that this approach enables in situ regeneration of pulmonary valves with long-term functionality in vivo. However, the evolution and mechanisms of inflammation, polymer absorption and tissue regeneration are largely unknown, and adverse valve remodeling and intra- and inter-valvular variability have been reported. Therefore, the goal of the present study was to gain a mechanistic understanding of the in vivo regenerative processes by combining routine histology and immunohistochemistry, using a comprehensive sheep-specific antibody panel, with Raman microspectroscopy for the spatiotemporal analysis of in situ tissue-engineered pulmonary valves with follow-up to 24 months from a previous preclinical study in sheep. The analyses revealed a strong spatial heterogeneity in the influx of inflammatory cells, graft resorption, and foreign body giant cells. Collagen maturation occurred predominantly between 6 and 12 months after implantation, which was accompanied by a progressive switch to a more quiescent phenotype of infiltrating cells with properties of valvular interstitial cells. Variability among specimens in the extent of tissue remodeling was observed for follow-up times after 6 months. Taken together, these findings advance the understanding of key events and mechanisms in material-driven in situ heart valve tissue engineering. Statement of significance This study describes for the first time the long-term in vivo inflammatory and regenerative processes that underly in situ heart valve tissue engineering using resorbable synthetic scaffolds. Using a unique combinatorial analysis of immunohistochemistry and Raman microspectroscopy, important spatiotemporal variability in graft resorption and tissue formation was pinpointed in in situ tissue-engineered heart valves, with a follow-up time of up to 24 months in sheep. This variability was correlated to heterogenous regional cellular repopulation, most likely instigated by region-specific differences in surrounding tissue and hemodynamics. The findings of this research contribute to the mechanistic understanding of in situ tissue engineering using resorbable synthetics, which is necessary to enable rational design of improved grafts, and ensure safe and robust clinical translation.

The host immune response to an implanted biomaterial, particularly the phenotype of infiltrating macrophages, is a key determinant of biocompatibility and downstream remodeling outcome. The present study used a subcutaneous rat model to compare the tissue response, including macrophage phenotype, remodeling potential, and calcification propensity of a biologic scaffold composed of glutaraldehyde-fixed bovine pericardium (GF-BP), the standard of care for heart valve replacement, with those of an electrospun polycarbonate-based supramolecular polymer scaffold (ePC-UPy), urinary bladder extracellular matrix (UBM-ECM), and a polypropylene mesh (PP). The ePC-UPy and UBM-ECM materials induced infiltration of mononuclear cells throughout the thickness of the scaffold within 2 days and neovascularization at 14 days. GF-BP and PP elicited a balance of pro-inflammatory (M1-like) and anti-inflammatory (M2-like) macrophages, while UBM-ECM and ePC-UPy supported a dominant M2-like macrophage phenotype at all timepoints. Relative to GF-BP, ePC-UPy was markedly less susceptible to calcification for the 180 day duration of the study. UBM-ECM induced an archetypical constructive remodeling response dominated by M2-like macrophages and the PP caused a typical foreign body reaction dominated by M1-like macrophages. The results of this study highlight the divergent macrophage and host remodeling response to biomaterials with distinct physical and chemical properties and suggest that the rat subcutaneous implantation model can be used to predict in vivo biocompatibility and regenerative potential for clinical application of cardiovascular biomaterials.

This study aimed to validate a dedicated software for quantitative videodensitometric angiographic assessment of mitral regurgitation (QMR).Quantitative videodensitometric aortography of aortic regurgitation using the time-density principle is a well-documented technique, but the angiographic assessment of mitral regurgitation (MR) remains at best semi-quantitative and operator dependent.Fourteen sheep underwent surgical mitral valve replacement using 2 different prostheses. Pre-sacrifice left ventriculograms were used to assess MR fraction (MRF) using QMR and MR volume (MRV). In an independent core lab, the CAAS QMR 0.1 was used for QMR analysis. In vitro MRF and MRV were assessed in a mock circulation at a comparable cardiac output to the in vivo one by thermodilution. The correlations and agreements of in vitro and in vivo MRF, MRV, and interobserver reproducibility for QMR analysis were assessed using the averaged cardiac cycles (CCs).In vivo derived MRF by QMR strongly correlated with in vitro derived MRF, regardless of the number of the CCs analyzed (best correlation: 3 CCs y = 0.446 + 0.994x; R = 0.784; p =0.002). The mean absolute difference between in vitro derived MRF and in vivo derived MRF from 3 CCs was 0.01 ± 4.2% on Bland-Altman analysis. In vitro MRV and in vivo MRV from 3 CCs were very strongly correlated (y = 0.196 + 1.255x; R = 0.839; p 0.001). The mean absolute difference between in vitro MRV and in vivo MRV from 3 CCs was -1.4 ± 1.9 ml. There were very strong correlations of in vivo MRF between 2 independent analysts, regardless of the number of the CCs.In vivo MRF using the novel software is feasible, accurate, and highly reproducible. These promising results have led us to initiate the first human feasibility study comprising patients undergoing percutaneous mitral valve edge-to-edge repair.

Background Right ventricular outflow tract (RVOT) conduits used in children with congenital heart disease often degenerate rapidly or develop other complications, and they do not grow with the patient. This leads to multiple surgeries until adult-sized conduits can be implanted. We report experimental in vivo experience with an entirely synthetic absorbable graft, designed to be replaced by tissue in-vivo by host cells, in a process termed Endogenous Tissue Restoration (ETR), and to grow commensurate with somatic growth. Methods We characterized the structure, mechanical properties, biocompatibility, and in vivo remodelling of a bioabsorbable polyester based on the self-complementary ureido-pyrimidinone (UPy) quadruple hydrogen-bonding motif. Electrospinning was used to process the polymer into a tubular graft with a highly porous wall structure, which was implanted as a pulmonary artery interposition graft in 9 adult sheep with a maximum follow-up of 1 year, followed by pathologic and mechanical analysis. Results All grafts were patent by transthoracic echocardiography. Eight were intact at post-mortem examination. One graft had aneurysmal dilation. Graft polymer resorption in vivo was consistent among specimens. Histologic examination revealed progressive tissue replacement of graft polymer, ongoing at one year, with remodeling to a structure that had some key features of native vascular wall. Burst pressures for all explants at 8 weeks and beyond were higher than those of native pulmonary artery (PA) and largely determined by newly formed tissue. Conclusions Preclinical studies of a new, absorbable polymeric graft for PA replacement showed remodelling by endogenous cells up to one-year follow-up. Our results show that ETR leads to progressive and substantial replacement of an off-the-shelf synthetic bioabsorbable conduit by functional host tissue to one year in sheep. Thus, further development of this novel concept is warranted.

Valved allografts and xenografts for reconstruction of the right ventricular outflow tract (RVOT) lack durability and do not grow. We report the first clinical use of a completely bioabsorbable valved conduit (Xeltis pulmonary valve - XPV) in children. Twelve children (six male), median age five (two to twelve) years and median weight 17 (10 to 43) kg, underwent RVOT reconstruction with the XPV. Diagnoses were: pulmonary atresia with ventricular septal defect (VSD) (n = 4), tetralogy of Fallot (n = 4), common arterial trunk (n = 3), and transposition of the great arteries with VSD and pulmonary stenosis (n = 1). All had had previous surgery, including prior RVOT conduit implantation in six. Two diameters of conduit 16mm (n = 5) and 18mm (n = 7) were used. At 24 months none of the patients has required surgical re-intervention, 9 of the 12 are in NYHA functional class I and three patients in NYHA class II. None of the conduits has shown evidence of progressive stenosis, dilation or aneurysm formation. Residual peak gradient of >40 mm Hg was observed in three patients, caused by kinking of the conduit at implantation in 1 and distal stenosis in the peripheral pulmonary arteries in 2 patients. Five patients developed severe pulmonary valve insufficiency (PI); the most common mechanism was prolapse of at least one of the valve leaflets. The XPV conduit is a promising innovation for RVOT reconstruction. Progressive PI requires however an improved design (geometry, thickness) of the valve leaflets.

In situ heart valve tissue engineering is an emerging approach in which resorbable, off-the-shelf available scaffolds are used to induce endogenous heart valve restoration. Such scaffolds are designed to recruit endogenous cells in vivo, which subsequently resorb polymer and produce and remodel new valvular tissue in situ. Recently, preclinical studies using electrospun supramolecular elastomeric valvular grafts have shown that this approach enables in situ regeneration of pulmonary valves with long-term functionality in vivo. However, the evolution and mechanisms of inflammation, polymer absorption and tissue regeneration are largely unknown, and adverse valve remodeling and intra- and inter-valvular variability have been reported. Therefore, the goal of the present study was to gain a mechanistic understanding of the in vivo regenerative processes by combining routine histology and immunohistochemistry, using a comprehensive sheep-specific antibody panel, with Raman microspectroscopy for the spatiotemporal analysis of in situ tissue-engineered pulmonary valves with follow-up to 24 months from a previous preclinical study in sheep. The analyses revealed a strong spatial heterogeneity in the influx of inflammatory cells, graft resorption, and foreign body giant cells. Collagen maturation occurred predominantly between 6 and 12 months after implantation, which was accompanied by a progressive switch to a more quiescent phenotype of infiltrating cells with properties of valvular interstitial cells. Variability among specimens in the extent of tissue remodeling was observed for follow-up times after 6 months. Taken together, these findings advance the understanding of key events and mechanisms in material-driven in situ heart valve tissue engineering.

Background To present a 2-year follow-up regarding safety and hemodynamic performance of a new restorative vascular graft used as extracardiac cavo-pulmonary connection in patients with univentricular congenital heart malformations. Methods The graft was implanted in five patients (aged 4-12 years) as extracardiac connection between the inferior vena cava and the pulmonary artery. The conduit consists of a bioabsorbable polymer-based implant able to generate endogenous tissue restoration leading to a fully functional neo-vessel while the polymer progressively absorbs. All patients have reached more than 24 months following surgery and underwent echocardiography and magnetic resonance imaging. Results All patients are doing well at 24 months follow-up, with no graft-related serious adverse events. Transthoracic echocardiography demonstrated adequate function of the conduit in all patients while magnetic resonance imaging showed anatomical and functional stability of the restorative grafts. Conclusions The new restorative conduit has been successfully used for the second step of the Fontan procedure as extracardiac total cavopulmonary connection. The results are promising because they suggest that complete transformation of a bioabsorbable polymer and replacement through endogenous tissue may represent a major advantage in the treatment of congenital heart disease patients. Further monitoring will allow to evaluate the long-term behavior of this new graft, in terms of clinical and hemodynamic performance, thrombogenicity and ability to grow.

Aims: The Xeltis aortic valve leaflets are made from a bioabsorbable supramolecular polymer that guides the tissue to restoring itself. It is mounted on a self-expanding nitinol frame that includes three feelers and a native leaflet clipping mechanism. We sought to investigate the acute valve performance in a preclinical setting. Methods and results: In 33 sheep, 26 mm Xeltis aortic valves were transapically implanted in a 23 mm native annulus. Aortography (analysable, n = 28) and echocardiography (analysable, n = 20) images were acquired immediately after implantation of the Xeltis aortic valve to assess the acute device performance. On echocardiography, transvalvular peak pressure gradient (PG) was 7.4 (IQR: 6.0-8.9) mmHg, mean PG was 4.0 (IQR: 3.0-5.0) mmHg, and effective orifice area was 2.2 (IQR: 1.6-2.5) cm(2). Trace (n = 6), mild (n = 2) and no (n = 12) transvalvular aortic regurgitation (AR) were seen. Likewise, no paravalvular AR was detected in 7 cases, whereas trace, mild and moderate were seen in 7, 5 and 1 cases, respectively. On quantitative videodensitometric AR (VD-AR) assessment, a median value of 6% (IQR: 1-12%) of AR was seen. Three cases had a VD-AR superior to 17%, which has a prognostic significance. Out of these three cases, two had echocardiographic assessment available, which showed mild and moderate paravalvular regurgitation due to inadequate leaflet clipping. Conclusions: In a transapical ovine model, the novel restorative transcatheter aortic valve with bioabsorbable leaflets demonstrated good haemodynamic performance comparable to commercially available devices. The highly porous polymeric leaflets demonstrated good competence immediately after implantation with no cases having > mild transvalvular AR

The current standard of treatment of valvular diseases with severe functional and/or clinical consequences is the repair or replacement of the valve, which is usually surgical or, in specific scenarios, percutaneous. The available prosthetic valves, however, are not a magic bullet in the physicians' arsenal for the management of valvular diseases, since the age-dependent structural valve deterioration (SVD) and the need for prolonged systemic anticoagulation in the case of metallic prosthetic valves are not inconsequential during the lifespan of a patient with an implanted prosthetic valve. Based on decades of research combining the scientific disciplines of supramolecular chemistry, electrospinning and regenerative medicine, endogenous tissue restoration has emerged as a very promising domain to provide this magic bullet, in the form of valves, which enables functional restoration by the body itself. The concept of a restorative material that will set the framework for the creation of a new, endogenous valve is very appealing and, recently, proof of concept studies have been completed at both preclinical and clinical levels. These studies have shown favourable pathologic, anatomic and haemodynamic characteristics compared to currently available prosthetic valves, in sheep and in young children undergoing right ventricular outflow tract reconstruction, and may represent an alternative to the bioprosthesis made of xenopericardial tissue. The present manuscript reviews the rationale, background knowledge and historic development of endogenous tissue restoration and presents preliminary data about the Xeltis valve, which appears to have the potential to make restorative valve therapy a reality in clinical practice.

Synthetic polymers are widely used to fabricate porous scaffolds for the regeneration of cardiovascular tissues. To ensure mechanical integrity, a balance between the rate of scaffold absorption and tissue formation is of high importance. A higher rate of tissue formation is expected in fast-degrading materials than in slow-degrading materials. This could be a result of synthetic cells, which aim to compensate for the fast loss of mechanical integrity of the scaffold by deposition of collagen fibers. Here, we studied the effect of fast-degrading polyglycolic acid scaffolds coated with poly-4-hydroxybutyrate (PGA-P4HB) and slow-degrading poly-caprolactone (PCL) scaffolds on amount of tissue, composition, and mechanical characteristics in time, and compared these engineered values with values for native human heart valves. Electrospun PGA-P4HB and PCL scaffolds were either kept unseeded in culture or were seeded with human vascular-derived cells. Tissue formation, extracellular matrix (ECM) composition, remaining scaffold weight, tissue-to-scaffold weight ratio, and mechanical properties were analyzed every week up to 6 weeks. Mass of unseeded PCL scaffolds remained stable during culture, whereas PGA-P4HB scaffolds degraded rapidly. When seeded with cells, both scaffold types demonstrated increasing amounts of tissue with time, which was more pronounced for PGA-P4HB-based tissues during the first 2 weeks; however, PCL-based tissues resulted in the highest amount of tissue after 6 weeks. This study is the first to provide insight into the tissue-to-scaffold weight ratio, therewith allowing for a fair comparison between engineered tissues cultured on scaffolds as well as between native heart valve tissues. Although the absolute amount of ECM components differed between the engineered tissues, the ratio between ECM components was similar after 6 weeks. PCL-based tissues maintained their shape, whereas the PGA-P4HB-based tissues deformed during culture. After 6 weeks, PCL-based engineered tissues showed amounts of cells and ECM that were comparable to the number of human native heart valve leaflets, whereas values were lower in the PGA-P4HB-based tissues. Although increasing in time, the number of collagen crosslinks were below native values in all engineered tissues. In conclusion, this study indicates that slow-degrading scaffold materials are favored over fast-degrading materials to create organized ECM-rich tissues in vitro, which keep their three-dimensional structure before implantation.

Objective To evaluate the safety and the short-term function of a novel pulmonary valved conduit (Xeltis Pulmonary Valved Conduit; XPV) up to 12 months in a sheep model. Methods XPV and Hancock bioprosthetic valved conduits (H, used as control) were implanted in adult sheep in the pulmonary artery position. Animals were killed at 2 months (n = 6 XPV), 6 months (n = 6 XPV and n = 3 H), and 12 months (n = 6 XPV) and examined histologically. During follow-up, function of the device as well as diameter of both XPV and H were assessed by transthoracic echocardiography. Results Of 18 animals that received an XPV, 15 survived until they were killed; 3 animals that received H survived the planned observational interval. XPV showed mild neointimal thickening and degradation beginning at 2 months with an ongoing process until 12 months. Only 1 of the 18 animals with XPV had significant calcification at 6 months. Pathologic specimen did not show any significant narrowing of the conduit whereas neointimal thickness showed a peak at 6 months. Inflammatory process reached a maximum at 6 months and the degradation process at 12 months. Gel permeation chromatography analysis showed molecular weight loss beginning at 2 months with a peak at 12 months for the conduit with slower absorption for the leaflets. The wall of the H conduits showed more neointimal thickening, narrowing, and calcification compared with XPV, but the leaflets demonstrated minimal changes. Conclusions Both conduits demonstrated an acceptable safety and functionality. Significant calcification was rarely observed in the XPV, whereas the H developed more neointimal thickness with calcification of the porcine aortic root portion of the wall.

The emerging field of in situ tissue engineering (TE) of load bearing tissues places high demands on the implanted scaffolds, as these scaffolds should provide mechanical stability immediately upon implantation. The new class of synthetic supramolecular biomaterial polymers, which contain non-covalent interactions between the polymer chains, thereby forming complex 3D structures by self assembly. Here, we have aimed to map the degradation characteristics of promising (supramolecular) materials, by using a combination of in vitro tests. The selected biomaterials were all polycaprolactones (PCLs), either conventional and unmodified PCL, or PCL with supramolecular hydrogen bonding moieties (either 2-ureido-[1H]-pyrimidin-4-one or bis-urea units) incorporated into the backbone. As these materials are elastomeric, they are suitable candidates for cardiovascular TE applications. Electrospun scaffold strips of these materials were incubated with solutions containing enzymes that catalyze hydrolysis, or solutions containing oxidative species. At several time points, chemical, morphological, and mechanical properties were investigated. It was demonstrated that conventional and supramolecular PCL-based polymers respond differently to enzyme-accelerated hydrolytic or oxidative degradation, depending on the morphological and chemical composition of the material. Conventional PCL is more prone to hydrolytic enzymatic degradation as compared to the investigated supramolecular materials, while, in contrast, the latter materials are more susceptible to oxidative degradation. Given the observed degradation pathways of the examined materials, we are able to tailor degradation characteristics by combining selected PCL backbones with additional supramolecular moieties. The presented combination of in vitro test methods can be employed to screen, limit, and select biomaterials for pre-clinical in vivo studies targeted to different clinical applications.

Aims: The Xeltis bioabsorbable pulmonary valved conduit (XPV), designed to guide functional restoration of patients' own tissue, is potentially more durable than current pulmonary bioprosthetic valves/valved conduits. The aim of this study was to assess the haemodynamic performance of the novel XPV implanted in an ovine model. Methods and results: The XPV was surgically implanted in adult sheep under general anaesthesia and cardiopulmonary bypass (XPV group, n= 20). Sheep that received a Hancock bioprosthetic pulmonary valved conduit served as a control group (HPV group, n = 3). Transthoracic echocardiograms from VARC-2 recommended time points at 3, 6, 9, 12, 18 and 24 months (XPV group) and at 3 and 6 months (HPV group) after the procedure were analysed in an independent core laboratory. The primary endpoint was favourable valved conduit performance, defined as peak systolic pressure gradient

Tissue-engineered heart valves (TEHVs), based on polyglycolic acid (PGA) scaffolds coated with poly-4-hydroxybutyrate (P4HB), have shown promising in vivo results in terms of tissue formation. However, a major drawback of these TEHVs is compaction and retraction of the leaflets, causing regurgitation. To overcome this problem, the aim of this study was to investigate: (a) the use of the slowly degrading poly-e-caprolactone (PCL) scaffold for prolonged mechanical integrity; and (b) the use of lower passage cells for enhanced tissue formation. Passage 3, 5 and 7 (P3, P5 and P7) human and ovine vascular-derived cells were seeded onto both PGA-P4HB and PCL scaffold strips. After 4 weeks of culture, compaction, tissue formation, mechanical properties and cell phenotypes were compared. TEHVs were cultured to observe retraction of the leaflets in the native-like geometry. After culture, tissues based on PGA-P4HB scaffold showed 50-60% compaction, while PCL-based tissues showed compaction of 0-10%. Tissue formation, stiffness and strength were increased with decreasing passage number; however, this did not influence compaction. Ovine PCL-based tissues did render less strong tissues compared to PGA-P4HB-based tissues. No differences in cell phenotype between the scaffold materials, species or cell passage numbers were observed. This study shows that PCL scaffolds may serve as alternative scaffold materials for human TEHVs with minimal compaction and without compromising tissue composition and properties, while further optimization of ovine TEHVs is needed. Reducing cell expansion time will result in faster generation of TEHVs, providing more rapid treatment for patients.

Objectives To assess safety and clinical performance of a novel bioabsorbable vascular graft in pediatric patients with univentricular cardiac malformation who received surgical correction via an extracardiac cavopulmonary conduit. Methods The implanted graft material is designed to attract patient's own cells and proteins, which trigger a cascade of physiological events leading to endogenous tissue restoration. As the graft resorbs progressively after implantation, components of native tissue including collagen, endothelial lining, and capillary blood vessels develop and organize into a natural tissue. Five patients (aged 4-12 years) received this new vascular graft as interposition between the inferior vena cava and the pulmonary artery. They were followed up to 12 months after surgery. The conduit was assessed by echocardiography, computed tomography and magnetic resonance imaging, including 4-dimensional flow. Results All patients recovered from the procedure without complications. No device-related adverse events were reported. Two patients required interventional occlusion of aortopulmonary collaterals. At 12 months, there was a significant improvement in the patients' general condition. Imaging studies demonstrated anatomical (conduit diameter, length and wall thickness) and functional (blood flow pattern) stability of the bioabsorbable grafts in all patients with no significant changes at 12 months compared with early postoperative data. Conclusions Initial clinical experience with a novel absorbable graft underlines the potential of this new material to improve cardiac and vascular surgical procedures. In addition, better biocompatibility may reduce permanent implant-related complications. A longer follow-up is needed to assess the long-term effectiveness of biodegradable vascular grafts, including their ability to grow.

We describe the preparation of an injectable, biocompatible, and elastic segmented copolymer hydrogel for biomedical applications, with segmented hydrophobic bisurea hard segments and hydrophilic PEG segments. The segmented copolymers were obtained by the step growth polymerization of amino-terminated PEG and aliphatic diisocyanate. Due to their capacity for multiple hydrogen bonding within the hydrophobic segments, these copolymers can form highly stable gels in water at low concentrations. Moreover, the gels show shear thinning by a factor of 40 at large strain, which allows injection through narrow gauge needles. Hydrogel moduli are highly tunable via the physical cross-link density and the length of the hydrophilic segments. In particular, the mechanical properties can be optimized to match the properties of biological host tissues such as muscle tissue and the extracellular matrix.

Cross-linked animal tissues are being used in virtually all modern biological aortic replacement valves. Limitations in tissue durability, consistency and sourcing should be overcome by novel alternative materials. The restorative aortic valve concept is based on supramolecular polymer technology

Creating autologous tissues with on-demand and native-like biomechanical properties is the ultimate challenge in functional heart valve tissue engineering. A promising approach toward this goal is to induce development of native-like tissue structure in vitro by mimicking the diastolic loading phase in a bioreactor. Heart valves cultured with this approach showed in vitro sufficient strength to withstand systemic pressures. This study aims to link global functioning of these valves to the development of a native-like fiber architecture induced by in vitro diastolic loading. It is hypothesized that increased loading magnitude during culture will lead to increased collagen fiber alignment. To test this hypothesis, 10 tissue-engineered heart valves were subjected to different loading protocols in vitro. Local fiber distribution and mechanics were determined in an inverse numerical-experimental approach, combining indentation tests with confocal imaging. Indentation tests on native ovine heart valves were used as a comparison. Although the effect of loading magnitude was small within the tested range, results indicated that the local fiber architecture indeed developed toward native structural properties for all loading protocols. However, apparent fiber mechanics were much stiffer compared with native. This confirms that in vitro mechanical conditioning induces development of a native-like tissue architecture, which underlines its importance for functional heart valve tissue engineering.

The mechanical properties of soft biological tissues in general and early stage engineered tissues in particular limit the feasibility of conventional tensile tests for their mechanical characterisation. Furthermore, the most important mode in development of deep tissue injury (DTI) is compression. Therefore, an inverse numerical-experimental approach using a finite spherical indentation test is proposed. To demonstrate the feasibility of the approach indentation tests are applied to bio-artificial muscle (BAM) tissue. BAMs are cultured in vitro with (n = 20) or without (n = 12) myoblast cells to quantify the effect of the cells on the passive transverse mechanical properties. Indentation tests are applied up to 80% of the tissue thickness. A non-linear Neo-Hookean constitutive model is fitted to the experimental results for parameter estimation. BAMs with cells demonstrated both stiffer and more non-linear material behaviour than BAMs without cells.

Traditionally, the complex mechanical behavior of planar soft biological tissues is characterized by (multi)axial tensile testing. While uniaxial tests do not provide sufficient information for a full characterization of the material anisotropy, biaxial tensile tests are difficult to perform and tethering effects limit the analyses to a small central portion of the test sample. In both cases, determination of local mechanical properties is not trivial. Local mechanical characterization may be performed by indentation testing. Conventional indentation tests, however, often assume linear elastic and isotropic material properties, and therefore these tests are of limited use in characterizing the nonlinear, anisotropic material behavior typical for planar soft biological tissues. In this study, a spherical indentation experiment assuming large deformations is proposed. A finite element model of the aortic valve leaflet demonstrates that combining force and deformation gradient data, one single indentation test provides sufficient information to characterize the local material behavior. Parameter estimation is used to fit the computational model to simulated experimental data. The aortic valve leaflet is chosen as a typical example. However, the proposed method is expected to apply for the mechanical characterization of planar soft biological materials in general.

Different types of synthetic scaffolds are used for tissue engineering of heart valves. Tissue-engineered heart valves (TEHV), based on a rapid degrading polyglycolic acid (PGA) scaffold coated with poly-4-hydroxybutyrate (P4HB) and seeded with vascular derived cells, have shown promising in-vivo results. However, a major drawback of these TEHV is compaction and retraction of the leaflets causing regurgitation. It is hypothesized that this is a result of traction forces exerted by the cells, combined with an imbalance of the formed tissue and loss of mechanical integrity of the scaffold due to degradation. The aim of this study is to evaluate alternative approaches to overcome the compaction and retraction of TEHV without compromising on tissue composition and properties. The alternative approaches that are studied here are 1) the use of the slow degrading poly-ε-caprolactone (PCL) scaffold for prolonged mechanical integrity and 2) the use of lower passage vascular cells for enhanced tissue formation. Compaction, tissue formation, cell phenotype and mechanical properties of tissues based on passage 3, 5 and 7 vascular cells in PCL and PGA-P4HB scaffolds are compared. TEHV aim to be designed for humans, but since the ovine model is used to show proof of principle both human and ovine cells were used. Passage 3, 5 and 7 (p3, p5 and p7) human and ovine vascular-derived cells were seeded onto both PGA-P4HB and PCL scaffold strips (n=6 per passage and scaffold material), using fibrin as a cell carrier. After 4 weeks of culture under constrained static conditions, one strip was used for histology. The remaining strips were used for mechanical testing and biochemical assays as indicators for tissue strength and tissue formation, respectively. After 4 weeks, the tissues based on PGA-P4HB showed 50-60% compaction, while PCL-based tissues showed compaction of 0-10%. Cell passage number and species did not influence compaction. Tissue formation was comparable between passage numbers and scaffold materials in ovine while human p5 showed decreased tissue formation in both scaffold materials. Collagen content was increased with decreasing passage numbers in both species and scaffold materials. No differences in cell phenotype between the scaffold materials or cell passage numbers were observed. The Young’s modulus and the ultimate tensile strength of tissues of both species were higher in the lower passage groups of both scaffold groups. This study shows that PCL scaffolds may serve as alternative scaffold material for tissue engineering heart valves with minimal compaction and without compromising on tissue composition and properties. Cells from lower passages showed to improve tissue formation. Reducing cell expansion time will result in faster generation of TEHV, providing a more rapid treatment to patients.

In situ tissue engineered heart valves yields a new generation of cardiovascular substitutes. The body is used as a bioreactor where it relies on the natural regenerative potential of the body. The shift from the classical way of tissue engineering to in-situ tissue engineering emphasizes the role of the scaffold. The scaffold should be able to capture and preserve cells for tissue formation and it has to maintain valve functionality while tissue is developing. The use of synthetic biomaterials is very attractive. Poly(ε-caprolactone) (PCL) is an important polymer due to its mechanical properties and miscibility with a large range of other polymers. Electrospinning attracted great interest as a production method of biomaterials for in situ tissue engineering. The electrospinning process of PCL offers a nice technique for thin fiber formation to eventually create three dimensional scaffolds with the characteristic three layers, typical for heart valves. The fibers produced with electrospinning provide a similar physical structure as the extra cellular matrix. The space between fibers needs to be large enough for cells to adhere and migrate into the scaffold. Sufficient cellular in growth is needed for tissue formation. In this study cellular in growth was measured in subcutaneously implanted electrospun PCL patches. Furthermore tissue formation and degradation of the polymer is investigated. Thirty healthy male F344 Rats are used. The implants with surrounding tissue were explanted after 2, 5, 10, 21 or 84 days and embedded in paraffin. The explanted tissues were examined using immunohistochemistry (HE,MPO, ED1, α-SMA, and PSR). The electrospun fibers had a diameter of 10 μm. SEM pictures showed controlled void spaces. In the electrospun PCL samples we found a very high cellular infiltration rate after 84 days, mean of 396.819 cells per high power field. First infiltration of mainly neutrophil granulocytes was seen, followed by macrophages. Cells infiltrate throughout the whole sample. After 84 days fibroblast were seen, which were able to produce collagen. Furthermore after 84 days, macrophage giant cells and neo-vessel formation was observed. PCL was degraded in the cytoplasm of the macrophages. Electrospun PCL scaffolds with a fiber diameter of 10 μm, are suitable for cellular in growth and tissue formation. This research forms part of the Project P1.01 iValve of the research program of the BioMedical Materials institute, co-funded by the Dutch Ministry of Economic Affairs, Agriculture and Innovation. The financial contribution of the Nederlandse Hartstichting is gratefully acknowledged.

Over the last few years, research interest in tissue engineering as an alternative for current treatment and replacement strategies for cardiovascular and heart valve diseases has significantly increased. In vitro mechanical conditioning is an essential tool for engineering strong implantable tissues [1]. Detailed knowledge of the mechanical properties of the native tissue as well as the properties of the developing engineered constructs is vital for a better understanding and control of the mechanical conditioning process. The nonlinear and anisotropic behavior of soft tissues puts high demands on their mechanical characterization. Current standards in mechanical testing of soft tissues include (multiaxial) tensile testing and indentation tests. Uniaxial tensile tests do not provide sufficient information for characterizing the full anisotropic material behavior, while biaxial tensile tests are difficult to perform, and boundary effects limit the test region to a small central portion of the tissue. In addition, characterization of the local tissue properties from a tensile test is non-trivial. Indentation tests may be used to overcome some of these limitations. Indentation tests are easy to perform and when indenter size is small relative to the tissue dimensions, local characterization is possible. We have demonstrated that by recording deformation gradients and indentation force during a spherical indentation test the anisotropic mechanical behavior of engineered cardiovascular constructs can be characterized [2]. In the current study this combined numerical-experimental approach is used on Tissue Engineered Heart Valves (TEHV).Copyright © 2008 by ASME

Over the last few years, research interest in tissue engineering as an alternative for e.g. current treatment and replacement strategies for cardiovascular and heart valve diseaes has significantly increased. In vitro mechanical conditioning is an essential tool for engineering strong implantable tissues [1]. Detailed knowledge of the mechanical properties of the native tissue as well as the properties of the developing engineered constructs is vital for a better understanding and control of the mechanical conditioning process. The typical highly nonlinear and anisotropic behavior of soft tissues puts high demands on their mechanical characterization. Current standards in mechanical testing of soft tissues include (multiaxial) tensile testing and indentation tests. Uniaxial tensile tests do not provide sufficient information for characterizing the full anisotropic material behavior, while biaxial tensile tests are difficult to perform, and boundary effects limit the test region to a small central portion of the tissue. In addition, characterization of the local tissue properties from a tensile test is non-trivial. Indentation tests may be used to overcome some of these limitations. Indentation tests are easy to perform and when indenter size is small relative to the tissue dimensions, local characterization is possible. Therefore, we propose a spherical indentation test using finite deformations.Copyright © 2007 by ASME

Heart valve tissue engineering offers a promising alternative for current treatment and replacement strategies, e.g., synthetic or bioprosthetic heart valves. In vitro mechanical conditioning is an important tool for engineering strong, implantable heart valves. Detailed knowledge of the mechanical properties of the native tissue as well as the developing tissue construct is vital for a better understanding and control of the remodeling processes induced by mechanical conditioning. The nonlinear, anisotropic and inhomogeneous mechanical behavior of heart valve tissue necessitates a mechanical characterization method that is capable of dealing with these complexities. In a recent computational study we showed that one single indentation test, combining force and deformation gradient data, provides sufficient information for local characterization of nonlinear soft anisotropic tissue properties. In the current study this approach is validated in two steps. First, indentation tests with varying indenter sizes are performed on linear elastic PDMS rubbers and compared to tensile tests on the same specimen. For the second step, tissue constructs are engineered using uniaxial or equibiaxial static constrained culture conditions. Digital image correlation (DIC) is used to quantify the anisotropy in the tissue constructs. For both validation steps, material parameters are estimated by inverse fitting of a computational model to the experimental results.

Understanding collagen fiber remodelling is desired to optimize the mechanical conditioning protocols in tissue-engineering of load-bearing cardiovascular structures. Mathematical models offer strong possibilities to gain insight into the mechanisms and mechanical stimuli involved in these remodelling processes. In this study, a framework is proposed to investigate remodelling of angular collagen fiber distribution in cardiovascular tissues. A structurally based model for collagenous cardiovascular tissues is extended with remodelling laws for the collagen architecture, and the model is subsequently applied to the arterial wall and aortic valve. For the arterial wall, the model predicts the presence of two helically arranged families of collagen fibers. A branching, diverging hammock-type fiber architecture is predicted for the aortic valve. It is expected that the proposed model may be of great potential for the design of improved tissue engineering protocols and may give further insight into the pathophysiology of cardiovascular diseases.