Search

Bio-based polyamide 1010 was melt-compounded with different percentages (2.5 to 10.0 wt.%) of expandable graphite (EGr) as an environmentally friendly solution to improve the flame retardancy properties. The mechanical, morphological, thermal and fire retardancy properties (among others) are analysed. The novelty of the article lies in the use of fully removable polyamide. The effect of the incorporation of EGr in the properties of this polymer was analysed and characterised. The incorporation of EGr into the PA1010 matrix led to very promising results. Mechanically, the EGr provided increased stiffness and a tensile strength up to 7.5 wt.%, verifying good mechanical performance. The DMTA results also show how the incorporation of EGr in the PA1010 matrix clearly increases the stiffness of the composites over the entire temperature range analysed. In terms of physical properties, water absorption of PA1010 was reduced particularly in the 10% EGr, which reduces the water absorption of PA1010 by 20%. In terms of flame retardant properties, with the incorporation of EGr, a significant reduction in the heat release rate (HRR) values as the concentration of the additive increases and a reduction in the maximum peak heat release rate (pHRR) can be observed for all compounds. In particular, it goes from 934 kW/m 2 for neat polyamide to a value of 374 kW/m 2 with 10% EGr. Finally, an improvement in the UL-94 rating of the 7.5 and 10% EGr composites was also observed, going from V-2 in the PA to V-1 in these composites.

The main objective of the work reported here was the analysis and evaluation of halloysite nanotubes (HNTs) as natural flame retardancy filler in partially biobased polyamide 610 (PA610), with 63% of carbon from natural sources. HNTs are naturally occurring clays with a nanotube-like shape. PA610 compounds containing 10%, 20%, and 30% HNT were obtained in a twin-screw co-rotating extruder. The resulting blends were injection molded to create standard samples for fire testing. The incorporation of the HNTs in the PA610 matrix leads to a reduction both in the optical density and a significant reduction in the number of toxic gases emitted during combustion. This improvement in fire properties is relevant in applications where fire safety is required. With regard to calorimetric cone results, the incorporation of 30% HNTs achieved a significant reduction in terms of the peak values obtained of the heat released rate (HRR), changing from 743 kW/m 2 to about 580 kW/m 2 and directly modifying the shape of the characteristic curve. This improvement in the heat released has produced a delay in the mass transfer of the volatile decomposition products, which are entrapped inside the HNTs' lumen, making it difficult for the sample to burn. However, in relation to the ignition time of the samples (TTI), the incorporation of HNTs reduces the ignition start time about 20 s. The results indicate that it is possible to obtain polymer formulations with a high renewable content such as PA610, and a natural occurring inorganic filler in the form of a nanotube, i.e., HNTs, with good flame retardancy properties in terms of toxicity, optical density and UL94 test.

This works focuses on the development of environmentally friendly composites with a partially biobased polyamide 610 (PA610), containing 63% biobased content, and a natural inorganic filler at the nanoscale, namely, halloysite nanotubes (HNTs). PA610 composites containing 10, 20, and 30 wt% HNTs were obtained by melt extrusion in a twin screw co-rotating extruder. The resulting composites were injection-molded for further characterization. The obtained materials were characterized to obtain reliable data about their mechanical, thermal, and morphological properties. The effect of the HNTs wt% on these properties was evaluated. From a mechanical standpoint, the addition of 30 wt% HNTs gave an increase in tensile modulus of twice the initial value, thus verifying how this type of natural load provides increased stiffness on injection molded parts. The materials prepared with HNTs slightly improved the thermal stability, while a noticeable improvement on thermomechanical resistance over a wide temperature range was observed with increasing HNTs content. The obtained results indicate that high biobased content composites can be obtained with an engineering thermoplastic, i.e., PA610, and a natural inorganic nanotube-shaped filler, i.e., HNTs, with balanced mechanical properties and attractive behavior against high temperature.