Search

Pyrolysis of oil sludge from the petroleum industry in contact with three mesoporous zeolite catalysts (CBV 720, 760 and 780) was carried out at 450°C to obtain oil rich in paraffin. The properties of the catalysts were characterized by XRD, XRF, NH3-TPD, FT-IR, TGA and nitrogen ad/desorption isotherms, while the pyrolysis oil was analysed by GC-MS. The products obtained in the presence of mesoporous zeolites showed selectivity for conversion of light hydrocarbons with decreased content of aromatic compounds. The homogeneous porosity distribution of the CBV 780 was the determining factor in catalytic pyrolysis. The residue could be treated by pyrolysis using mesoporous zeolite. The use of this catalyst produced 56% oil fraction with the highest yield of light hydrocarbons (96%). Compared with the thermal pyrolysis of this waste, the use of mesoporous zeolitic catalysts increased the production of light hydrocarbons and reduced the production of aromatic compounds in the pyrolysis oil from sludge. [ABSTRACT FROM AUTHOR]

Among global efforts facing plastic pollution, their gradual replacement with alternative materials has gained strength during the last decade. We identified five stakeholders and their respective key participation in the chain of bio-based, biodegradable and compostable plastics (BBCP), which have contributed to several flaws on governance of these materials. The widespread unfamiliarity of the consumers about biodegradability concepts has been leading to misguided purchase decisions and disposal practices, along with possible littering behavior. Simultaneously, the adoption of greenwashing practices by stores and manufacturers contribute to disseminating misguided decisions on plastic consumption. Such issues are further aggravated by the lack of certification standards concerning the impact of littering, including the assessment of persistency and toxicity, also covering those made with biodegradable plastics.". Moreover, even though such alternative polymers were originally conceived as a strategy to minimize plastics pollution, the almost inexistence of specific regulatory frameworks in different political scales may convert them in a relevant part of the problem. Therefore, the governance systems and management strategies need to incorporate BBCP as potentially hazardous waste as they do for conventional plastics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

While the use of biodegradable polymers is recognized as a global strategy to minimize plastic pollution, the technical standards (TS) used to attest their biodegradability may not be in compliance with most environmental parameters observed aquatic ecosystems. Indeed, through a careful assessment of the TS currently in use, this study evidenced that these guidelines cover only a fraction of the biogeochemical parameters seen in nature and largely disregard those that occur in the deep-sea. Thus, these TS may not be able to ensure the degradation of such polymers in natural environments, where microbial activity, pH, temperature, salinity, UV radiation and pressure are highly variable. This raises environmental concern, since relevant parcel of plastic ends up in the oceans reaching deep zones. Therefore, there is an urgent need to revise these TS, which must consider the actual fate of most plastic debris and include assessments under the challenging conditions found at these types of environment, alongside microplastic formation and ecotoxicology effects. Moreover, the next generation of biodegradability tests must be designed to enable a cost-effective implementation and incorporate accurate analytical techniques to assess polymer transformation. Furthermore, certification should provide information on time scale and degradation rates and, preferably, be globally harmonized., (Copyright © 2021 Elsevier B.V. All rights reserved.)

This study evaluated in the dry and rainy periods, the anthropogenic influence and the hydrodynamics in the distribution of plastic items in surface waters and bottom and beach sediments of the Jurujuba (Guanabara Bay, low and medium hydrodynamic) and Itaipu (oceanic region, high hydrodynamics) embayments; places of cultivation and extraction of mussels. Microplastics were 83% of the wastes collected, with a higher average concentration (138.41 items.kg -1 ) in beach sediments. High density polyethylene (HDPE) (38%), polypropylene (21%), and styrene (10%) were the most frequent polymers. There was no difference between the water and bottom sediment samples in the different embayments, in the studied periods, different from that observed in the beach sediment samples, with higher concentrations in the rainy season in Jurujuba. The results suggest that beach sediments are the best compartment to understand the dynamics of the distribution of plastic waste over time., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Concerns about plastic pollution and global public policies have encouraged consumers to acquire environmentally friendly products. Thus, products made of biodegradable plastics have been preferred by the public, despite their costs. However, greenwashing practices, promising more environmental benefits than the products actually offer, has become frequent. Nevertheless, no studies assessing the occurrence of greenwashing in commercial plastic products sold in large world economies have been performed. The present study aimed to experimentally evaluate alterations in structure and chemical composition of selected plastic products marketed in Canada, USA and Brazil. The aging experiments carried out by seawater immersion for 180 days showed no evidence of degradation in 4 out of the 6 studied samples, despite product claims of biodegradability or 100% degradability status. This finding denotes unequivocal greenwashing practices, even including bags made of polyethylene, an ordinary non-biodegradable polymer. Thus, the inadequate adoption of green marketing is deceiving to consumers and may lead to improper disposal of these materials. These practices are highly counterproductive in view of the global public policies recently adopted to control plastic pollution. Therefore, considering the technologies currently available for identification of polymers, a strict control should be exercised over products that claim biodegradable status., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The main purpose of this work was to evaluate the performance of a commercial reverse osmosis (RO) membrane regarding selectivity (rejection) and productivity (permeate flux) of the treatment of quaternary ammonium compounds (QAC) after electro-Fenton (EF) treatment. Pollutants treated after the EF process should be investigated for ecotoxicity, since excess ions and high conductivity are harmful to aquatic and terrestrial biota. The use of the membrane system after EF treatment acts as final polishing since some electro-oxidative treatments leave the sample with high conductivity. In this study, RO was operated with a constant flow of 1 L min -1 and feed pressures of 1 MPa, 2 MPa and 3 MPa to reject ions (sodium and iron) and to decrease the level of toxicity using representative species from different taxonomic groups: freshwater algae (Pseudokirchneriella subcapitata), microcrustaceans (Daphnia similis) and lettuce seeds (Lactuca sativa). Experiments carried out at different pressures showed that increased pressure caused a rise in rejection and permeate flux. At the applied pressure of 3 MPa, after 180 min, conductivity removal efficiency of 83% was obtained, 85% for sodium and 99% for iron at a flow of 13.87 L/h m 2 . In all bioassays, the use of the membrane was efficient to decrease the toxicity by rejecting the ions. The microcrustacean tested was the most sensitive organism, while alga was the most tolerant organism. The germination of lettuce seeds and the relative growth rate of the radicle after the combined EF+RO process was satisfactory., (Copyright © 2018 Elsevier Inc. All rights reserved.)

To evaluate the chemical recycling of plastic residues, co-pyrolysis of polypropylene (PP) waste with Brazilian crude oil was evaluated varying the temperature (400°C to 500°C) and the amount of PP fed to the reactor. The co-pyrolysis of plastic waste in an inert atmosphere provided around 80% of oil pyrolytic, and of these, half represent the fraction of diesel oil. This study can be used as a reference in chemical recycling of plastics, specially associated with plastics co-pyrolysis.